arch/arm/dts/k3-j7200-som-p0.dtsi

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
   4  */
   5
   6 /dts-v1/;
   7
   8 #include "k3-j7200.dtsi"
   9
  10 / {
  11         memory@80000000 {
  12                 device_type = "memory";
  13                 /* 4G RAM */
  14                 reg = <0x00 0x80000000 0x00 0x80000000>,
  15                       <0x08 0x80000000 0x00 0x80000000>;
  16         };
  17
  18         reserved_memory: reserved-memory {
  19                 #address-cells = <2>;
  20                 #size-cells = <2>;
  21                 ranges;
  22
  23                 secure_ddr: optee@9e800000 {
  24                         reg = <0x00 0x9e800000 0x00 0x01800000>;
  25                         alignment = <0x1000>;
  26                         no-map;
  27                 };
  28         };
  29 };
  30
  31 &wkup_pmx0 {
  32         mcu_fss0_hpb0_pins_default: mcu-fss0-hpb0-pins-default {
  33                 pinctrl-single,pins = <
  34                         J721E_WKUP_IOPAD(0x0, PIN_OUTPUT, 1) /* (B6) MCU_OSPI0_CLK.MCU_HYPERBUS0_CK */
  35                         J721E_WKUP_IOPAD(0x4, PIN_OUTPUT, 1) /* (C8) MCU_OSPI0_LBCLKO.MCU_HYPERBUS0_CKn */
  36                         J721E_WKUP_IOPAD(0x2c, PIN_OUTPUT, 1) /* (D6) MCU_OSPI0_CSn0.MCU_HYPERBUS0_CSn0 */
  37                         J721E_WKUP_IOPAD(0x30, PIN_OUTPUT, 1) /* (D7) MCU_OSPI0_CSn1.MCU_HYPERBUS0_RESETn */
  38                         J721E_WKUP_IOPAD(0x8, PIN_INPUT, 1) /* (B7) MCU_OSPI0_DQS.MCU_HYPERBUS0_RWDS */
  39                         J721E_WKUP_IOPAD(0xc, PIN_INPUT, 1) /* (D8) MCU_OSPI0_D0.MCU_HYPERBUS0_DQ0 */
  40                         J721E_WKUP_IOPAD(0x10, PIN_INPUT, 1) /* (C7) MCU_OSPI0_D1.MCU_HYPERBUS0_DQ1 */
  41                         J721E_WKUP_IOPAD(0x14, PIN_INPUT, 1) /* (C5) MCU_OSPI0_D2.MCU_HYPERBUS0_DQ2 */
  42                         J721E_WKUP_IOPAD(0x18, PIN_INPUT, 1) /* (A5) MCU_OSPI0_D3.MCU_HYPERBUS0_DQ3 */
  43                         J721E_WKUP_IOPAD(0x1c, PIN_INPUT, 1) /* (A6) MCU_OSPI0_D4.MCU_HYPERBUS0_DQ4 */
  44                         J721E_WKUP_IOPAD(0x20, PIN_INPUT, 1) /* (B8) MCU_OSPI0_D5.MCU_HYPERBUS0_DQ5 */
  45                         J721E_WKUP_IOPAD(0x24, PIN_INPUT, 1) /* (A8) MCU_OSPI0_D6.MCU_HYPERBUS0_DQ6 */
  46                         J721E_WKUP_IOPAD(0x28, PIN_INPUT, 1) /* (A7) MCU_OSPI0_D7.MCU_HYPERBUS0_DQ7 */
  47                 >;
  48         };
  49 };
  50
  51 &main_pmx0 {
  52         main_i2c0_pins_default: main-i2c0-pins-default {
  53                 pinctrl-single,pins = <
  54                         J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
  55                         J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
  56                 >;
  57         };
  58 };
  59
  60 &hbmc {
  61         /* OSPI and HBMC are muxed inside FSS, Bootloader will enable
  62          * appropriate node based on board detection
  63          */
  64         status = "disabled";
  65         pinctrl-names = "default";
  66         pinctrl-0 = <&mcu_fss0_hpb0_pins_default>;
  67         ranges = <0x00 0x00 0x05 0x00000000 0x4000000>, /* 64MB Flash on CS0 */
  68                  <0x01 0x00 0x05 0x04000000 0x800000>; /* 8MB RAM on CS1 */
  69
  70         flash@0,0 {
  71                 compatible = "cypress,hyperflash", "cfi-flash";
  72                 reg = <0x00 0x00 0x4000000>;
  73         };
  74 };
  75
  76 &mailbox0_cluster0 {
  77         interrupts = <436>;
  78
  79         mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
  80                 ti,mbox-rx = <0 0 0>;
  81                 ti,mbox-tx = <1 0 0>;
  82         };
  83
  84         mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
  85                 ti,mbox-rx = <2 0 0>;
  86                 ti,mbox-tx = <3 0 0>;
  87         };
  88 };
  89
  90 &mailbox0_cluster1 {
  91         interrupts = <432>;
  92
  93         mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
  94                 ti,mbox-rx = <0 0 0>;
  95                 ti,mbox-tx = <1 0 0>;
  96         };
  97
  98         mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
  99                 ti,mbox-rx = <2 0 0>;
 100                 ti,mbox-tx = <3 0 0>;
 101         };
 102 };
 103
 104 &mailbox0_cluster2 {
 105         status = "disabled";
 106 };
 107
 108 &mailbox0_cluster3 {
 109         status = "disabled";
 110 };
 111
 112 &mailbox0_cluster4 {
 113         status = "disabled";
 114 };
 115
 116 &mailbox0_cluster5 {
 117         status = "disabled";
 118 };
 119
 120 &mailbox0_cluster6 {
 121         status = "disabled";
 122 };
 123
 124 &mailbox0_cluster7 {
 125         status = "disabled";
 126 };
 127
 128 &mailbox0_cluster8 {
 129         status = "disabled";
 130 };
 131
 132 &mailbox0_cluster9 {
 133         status = "disabled";
 134 };
 135
 136 &mailbox0_cluster10 {
 137         status = "disabled";
 138 };
 139
 140 &mailbox0_cluster11 {
 141         status = "disabled";
 142 };
 143
 144 &main_i2c0 {
 145         pinctrl-names = "default";
 146         pinctrl-0 = <&main_i2c0_pins_default>;
 147         clock-frequency = <400000>;
 148
 149         exp_som: gpio@21 {
 150                 compatible = "ti,tca6408";
 151                 reg = <0x21>;
 152                 gpio-controller;
 153                 #gpio-cells = <2>;
 154                 gpio-line-names = "USB2.0_MUX_SEL", "CANUART_MUX1_SEL0",
 155                                   "CANUART_MUX2_SEL0", "CANUART_MUX_SEL1",
 156                                   "UART/LIN_MUX_SEL", "TRC_D17/AUDIO_REFCLK_SEL",
 157                                   "GPIO_LIN_EN", "CAN_STB";
 158         };
 159 };