Merge branch 'master' of git://git.denx.de/u-boot
[platform/kernel/u-boot.git] / arch / arm / dts / k2hk-evm.dts
1 /*
2  * Copyright 2013-2014 Texas Instruments, Inc.
3  *
4  * Keystone 2 Kepler/Hawking EVM device tree
5  *
6  * This program is free software; you can redistribute it and/or modify
7  * it under the terms of the GNU General Public License version 2 as
8  * published by the Free Software Foundation.
9  */
10 /dts-v1/;
11
12 #include "keystone.dtsi"
13 #include "k2hk.dtsi"
14
15 / {
16         compatible =  "ti,k2hk-evm","ti,keystone";
17         model = "Texas Instruments Keystone 2 Kepler/Hawking EVM";
18
19         soc {
20                 clocks {
21                         refclksys: refclksys {
22                                 #clock-cells = <0>;
23                                 compatible = "fixed-clock";
24                                 clock-frequency = <122880000>;
25                                 clock-output-names = "refclk-sys";
26                         };
27
28                         refclkpass: refclkpass {
29                                 #clock-cells = <0>;
30                                 compatible = "fixed-clock";
31                                 clock-frequency = <122880000>;
32                                 clock-output-names = "refclk-pass";
33                         };
34
35                         refclkarm: refclkarm {
36                                 #clock-cells = <0>;
37                                 compatible = "fixed-clock";
38                                 clock-frequency = <125000000>;
39                                 clock-output-names = "refclk-arm";
40                         };
41
42                         refclkddr3a: refclkddr3a {
43                                 #clock-cells = <0>;
44                                 compatible = "fixed-clock";
45                                 clock-frequency = <100000000>;
46                                 clock-output-names = "refclk-ddr3a";
47                         };
48
49                         refclkddr3b: refclkddr3b {
50                                 #clock-cells = <0>;
51                                 compatible = "fixed-clock";
52                                 clock-frequency = <100000000>;
53                                 clock-output-names = "refclk-ddr3b";
54                         };
55                 };
56         };
57
58         leds {
59                 compatible = "gpio-leds";
60                 debug1_1 {
61                         label = "keystone:green:debug1";
62                         gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; /* 12 */
63                 };
64
65                 debug1_2 {
66                         label = "keystone:red:debug1";
67                         gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; /* 13 */
68                 };
69
70                 debug2 {
71                         label = "keystone:blue:debug2";
72                         gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; /* 14 */
73                 };
74
75                 debug3 {
76                         label = "keystone:blue:debug3";
77                         gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; /* 15 */
78                 };
79         };
80 };
81
82 &usb_phy {
83         status = "okay";
84 };
85
86 &usb {
87         status = "okay";
88 };
89
90 &aemif {
91         cs0 {
92                 #address-cells = <2>;
93                 #size-cells = <1>;
94                 clock-ranges;
95                 ranges;
96
97                 ti,cs-chipselect = <0>;
98                 /* all timings in nanoseconds */
99                 ti,cs-min-turnaround-ns = <12>;
100                 ti,cs-read-hold-ns = <6>;
101                 ti,cs-read-strobe-ns = <23>;
102                 ti,cs-read-setup-ns = <9>;
103                 ti,cs-write-hold-ns = <8>;
104                 ti,cs-write-strobe-ns = <23>;
105                 ti,cs-write-setup-ns = <8>;
106
107                 nand@0,0 {
108                         compatible = "ti,keystone-nand","ti,davinci-nand";
109                         #address-cells = <1>;
110                         #size-cells = <1>;
111                         reg = <0 0 0x4000000
112                                1 0 0x0000100>;
113
114                         ti,davinci-chipselect = <0>;
115                         ti,davinci-mask-ale = <0x2000>;
116                         ti,davinci-mask-cle = <0x4000>;
117                         ti,davinci-mask-chipsel = <0>;
118                         nand-ecc-mode = "hw";
119                         ti,davinci-ecc-bits = <4>;
120                         nand-on-flash-bbt;
121
122                         partition@0 {
123                                 label = "u-boot";
124                                 reg = <0x0 0x100000>;
125                                 read-only;
126                         };
127
128                         partition@100000 {
129                                 label = "params";
130                                 reg = <0x100000 0x80000>;
131                                 read-only;
132                         };
133
134                         partition@180000 {
135                                 label = "ubifs";
136                                 reg = <0x180000 0x1fe80000>;
137                         };
138                 };
139         };
140 };
141
142 &i2c0 {
143         dtt@50 {
144                 compatible = "at,24c1024";
145                 reg = <0x50>;
146         };
147 };
148
149 &spi0 {
150         nor_flash: n25q128a11@0 {
151                 #address-cells = <1>;
152                 #size-cells = <1>;
153                 compatible = "Micron,n25q128a11";
154                 spi-max-frequency = <54000000>;
155                 m25p,fast-read;
156                 reg = <0>;
157
158                 partition@0 {
159                         label = "u-boot-spl";
160                         reg = <0x0 0x80000>;
161                         read-only;
162                 };
163
164                 partition@1 {
165                         label = "misc";
166                         reg = <0x80000 0xf80000>;
167                 };
168         };
169 };
170
171 &mdio {
172         status = "ok";
173         ethphy0: ethernet-phy@0 {
174                 compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
175                 reg = <0>;
176         };
177
178         ethphy1: ethernet-phy@1 {
179                 compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22";
180                 reg = <1>;
181         };
182 };