1 // SPDX-License-Identifier: GPL-2.0+
12 compatible = "wdt-reboot";
19 compatible = "linaro,optee-tz";
33 /delete-property/ assigned-clocks;
34 /delete-property/ assigned-clock-parents;
35 /delete-property/ assigned-clock-rates;
61 u-boot,off-on-delay-us = <20000>;
64 &pinctrl_reg_usdhc2_vmmc {
72 &pinctrl_usdhc2_gpio {
116 fsl,signal-voltage-switch-extra-delay-ms = <8>;
122 mmc-hs400-enhanced-strobe;
129 &{/soc@0/bus@30800000/i2c@30a20000/pca9450@25} {
133 &{/soc@0/bus@30800000/i2c@30a20000/pca9450@25/regulators} {
146 phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
155 filename = "u-boot-spl-ddr.bin";
165 filename = "lpddr4_pmu_train_1d_imem.bin";
170 filename = "lpddr4_pmu_train_1d_dmem.bin";
175 filename = "lpddr4_pmu_train_2d_imem.bin";
180 filename = "lpddr4_pmu_train_2d_dmem.bin";
188 args = "-n spl/u-boot-spl.cfgout -T imx8mimage -e 0x7e1000";
191 filename = "u-boot-spl-ddr.bin";
197 filename = "u-boot.itb";
200 description = "Configuration to load ATF before U-Boot";
201 #address-cells = <1>;
202 fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
206 description = "U-Boot (64-bit)";
209 compression = "none";
210 load = <CONFIG_SYS_TEXT_BASE>;
212 uboot_blob: blob-ext {
213 filename = "u-boot-nodtb.bin";
218 description = "ARM Trusted Firmware";
221 compression = "none";
226 filename = "bl31.bin";
231 description = "NAME";
233 compression = "none";
235 uboot_fdt_blob: blob-ext {
236 filename = "u-boot.dtb";
245 description = "NAME";