arch/arm/dts/imx6qdl-aristainetos2c.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0)
   2 /*
   3  * support for the imx6 based aristainetos2c board
   4  *
   5  * Copyright (C) 2019 Heiko Schocher <hs@denx.de>
   6  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
   7  *
   8  */
   9 #include <dt-bindings/gpio/gpio.h>
  10 #include <dt-bindings/clock/imx6qdl-clock.h>
  11
  12 #include "imx6qdl-aristainetos2-common.dtsi"
  13
  14 / {
  15         leds {
  16                 compatible = "gpio-leds";
  17                 pinctrl-names = "default";
  18                 pinctrl-0 = <&pinctrl_gpio>;
  19
  20                 LED_blue {
  21                         label = "led_blue";
  22                         gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
  23                 };
  24
  25                 LED_green {
  26                         label = "led_green";
  27                         gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
  28                 };
  29
  30                 LED_red {
  31                         label = "led_red";
  32                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;
  33                 };
  34
  35                 LED_yellow {
  36                         label = "led_yellow";
  37                         gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
  38                 };
  39
  40                 LED_ena {
  41                         label = "led_ena";
  42                         gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
  43                 };
  44         };
  45 };
  46
  47 &ecspi1 {
  48         fsl,spi-num-chipselects = <3>;
  49         cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH
  50                     &gpio4 10 GPIO_ACTIVE_HIGH
  51                     &gpio4 11 GPIO_ACTIVE_HIGH>;
  52         pinctrl-names = "default";
  53         pinctrl-0 = <&pinctrl_ecspi1>;
  54         status = "okay";
  55         pinctrl-assert-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
  56         pinctrl-assert-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
  57
  58         flash: m25p80@0 {
  59                 #address-cells = <1>;
  60                 #size-cells = <1>;
  61                 compatible = "micron,n25q128a11", "jedec,spi-nor";
  62                 spi-max-frequency = <20000000>;
  63                 reg = <0>;
  64         };
  65 };
  66
  67 &ecspi4 {
  68         fsl,spi-num-chipselects = <2>;
  69         cs-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH &gpio5 2 GPIO_ACTIVE_HIGH>;
  70         pinctrl-names = "default";
  71         pinctrl-0 = <&pinctrl_ecspi4>;
  72         status = "okay";
  73 };
  74
  75 &i2c1 {
  76         tpm@20 {
  77                 compatible = "infineon,slb9645tt";
  78                 reg = <0x20>;
  79         };
  80 };
  81
  82 &can1 {
  83         pinctrl-names = "default";
  84         pinctrl-0 = <&pinctrl_flexcan1>;
  85         status = "okay";
  86 };
  87
  88 &can2 {
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&pinctrl_flexcan2>;
  91         status = "okay";
  92 };
  93
  94 &usdhc1 {
  95         pinctrl-names = "default";
  96         pinctrl-0 = <&pinctrl_usdhc1>;
  97         cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
  98         wp-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
  99         no-1-8-v;
 100         status = "okay";
 101 };
 102
 103 &usdhc2 {
 104         pinctrl-names = "default";
 105         pinctrl-0 = <&pinctrl_usdhc2>;
 106         bus-width = <8>;
 107         no-1-8-v;
 108         non-removable;
 109         status = "okay";
 110 };
 111
 112 &iomuxc {
 113         pinctrl_ecspi1: ecspi1grp {
 114                 fsl,pins = <
 115                         MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
 116                         MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
 117                         MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
 118                         /* SS0# */
 119                         MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x100b1
 120                         /* SS1# */
 121                         MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x100b1
 122                         /* SS2# */
 123                         MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x100b1
 124                         /* WP pin NOR Flash */
 125                         MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x4001b0b0
 126                         /* Flash nReset */
 127                         MX6QDL_PAD_EIM_EB0__GPIO2_IO28  0x4001b0b0
 128                 >;
 129         };
 130
 131         pinctrl_ecspi4: ecspi4grp {
 132                 fsl,pins = <
 133                         MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1
 134                         MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1
 135                         MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1
 136                         MX6QDL_PAD_EIM_D29__GPIO3_IO29  0x100b1 /* SS0# */
 137                         MX6QDL_PAD_EIM_A25__GPIO5_IO02  0x100b1 /* SS1# */
 138                 >;
 139         };
 140
 141         pinctrl_gpio: gpiogrp {
 142                 fsl,pins = <
 143                         /* led enable */
 144                         MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25      0x4001b0b0
 145                         /* LCD power enable */
 146                         MX6QDL_PAD_NANDF_CS2__GPIO6_IO15        0x4001b0b0
 147                         /* led yellow */
 148                         MX6QDL_PAD_NANDF_CS3__GPIO6_IO16        0x4001b0b0
 149                         /* led red */
 150                         MX6QDL_PAD_EIM_WAIT__GPIO5_IO00         0x4001b0b0
 151                         /* led green */
 152                         MX6QDL_PAD_EIM_A24__GPIO5_IO04          0x4001b0b0
 153                         /* led blue */
 154                         MX6QDL_PAD_EIM_EB1__GPIO2_IO29          0x4001b0b0
 155                         /* Profibus IRQ */
 156                         MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0
 157                         /* FPGA IRQ currently unused*/
 158                         MX6QDL_PAD_SD3_DAT6__GPIO6_IO18         0x1b0b0
 159                         /* Display reset because of clock failure */
 160                         MX6QDL_PAD_SD4_DAT3__GPIO2_IO11         0x4001b0b0
 161                         /* spi bus #2 SS driver enable */
 162                         MX6QDL_PAD_EIM_A23__GPIO6_IO06          0x4001b0b0
 163                         /* RST_LOC# PHY reset input (has pull-down!)*/
 164                         MX6QDL_PAD_GPIO_18__GPIO7_IO13          0x4001b0b0
 165                         /* Touchscreen IRQ */
 166                         MX6QDL_PAD_SD4_DAT1__GPIO2_IO09         0x1b0b0
 167                         /* PCIe reset */
 168                         MX6QDL_PAD_EIM_A22__GPIO2_IO16          0x4001b0b0
 169                         /* make sure pin is GPIO and not ENET_REF_CLK */
 170                         MX6QDL_PAD_GPIO_16__GPIO7_IO11          0x4001a0b0
 171                         /* TPM PP */
 172                         MX6QDL_PAD_EIM_A21__GPIO2_IO17          0x4001b0b0
 173                         /* TPM Reset */
 174                         MX6QDL_PAD_EIM_A20__GPIO2_IO18          0x4001b0b0
 175                 >;
 176         };
 177
 178         pinctrl_flexcan1: flexcan1grp {
 179                 fsl,pins = <
 180                         MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x1b0b0
 181                         MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x1b0b0
 182                 >;
 183         };
 184
 185         pinctrl_flexcan2: flexcan2grp {
 186                 fsl,pins = <
 187                         MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0
 188                         MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0
 189                 >;
 190         };
 191
 192         pinctrl_usbotg: usbotggrp {
 193                 fsl,pins = <
 194                         MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID  0x17059
 195                         MX6QDL_PAD_KEY_COL4__USB_OTG_OC    0x1b0b0
 196                 >;
 197         };
 198
 199         pinctrl_usdhc1: usdhc1grp {
 200                 fsl,pins = <
 201                         MX6QDL_PAD_SD1_CMD__SD1_CMD    0x17059
 202                         MX6QDL_PAD_SD1_CLK__SD1_CLK    0x10059
 203                         MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059
 204                         MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059
 205                         MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059
 206                         MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059
 207                         /* SD1 card detect input */
 208                         MX6QDL_PAD_ENET_RXD0__GPIO1_IO27        0x1b0b0
 209                         /* SD1 write protect input */
 210                         MX6QDL_PAD_DI0_PIN4__GPIO4_IO20         0x1b0b0
 211                 >;
 212         };
 213
 214         pinctrl_usdhc2: usdhc2grp {
 215                 fsl,pins = <
 216                         MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 217                         MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 218                         MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 219                         MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 220                         MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 221                         MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 222                         MX6QDL_PAD_NANDF_D4__SD2_DATA4          0x17059
 223                         MX6QDL_PAD_NANDF_D5__SD2_DATA5          0x17059
 224                         MX6QDL_PAD_NANDF_D6__SD2_DATA6          0x17059
 225                         MX6QDL_PAD_NANDF_D7__SD2_DATA7          0x17059
 226                 >;
 227         };
 228 };