arch/arm/dts/imx6dl-riotboard.dts

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Copyright 2014 Iain Paton <ipaton0@gmail.com>
   4  */
   5
   6 /dts-v1/;
   7 #include "imx6dl.dtsi"
   8 #include <dt-bindings/gpio/gpio.h>
   9
  10 / {
  11         model = "RIoTboard i.MX6S";
  12         compatible = "riot,imx6s-riotboard", "fsl,imx6dl";
  13
  14         memory@10000000 {
  15                 device_type = "memory";
  16                 reg = <0x10000000 0x40000000>;
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial1:115200n8";
  21         };
  22
  23         leds {
  24                 compatible = "gpio-leds";
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&pinctrl_led>;
  27
  28                 led0: user1 {
  29                         label = "user1";
  30                         gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
  31                         default-state = "on";
  32                         linux,default-trigger = "heartbeat";
  33                 };
  34
  35                 led1: user2 {
  36                         label = "user2";
  37                         gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
  38                         default-state = "off";
  39                 };
  40         };
  41
  42         sound {
  43                 compatible = "fsl,imx-audio-sgtl5000";
  44                 model = "imx6-riotboard-sgtl5000";
  45                 ssi-controller = <&ssi1>;
  46                 audio-codec = <&codec>;
  47                 audio-routing =
  48                         "MIC_IN", "Mic Jack",
  49                         "Mic Jack", "Mic Bias",
  50                         "Headphone Jack", "HP_OUT";
  51                         mux-int-port = <1>;
  52                         mux-ext-port = <3>;
  53         };
  54
  55         reg_2p5v: regulator-2p5v {
  56                 compatible = "regulator-fixed";
  57                 regulator-name = "2P5V";
  58                 regulator-min-microvolt = <2500000>;
  59                 regulator-max-microvolt = <2500000>;
  60         };
  61
  62         reg_3p3v: regulator-3p3v {
  63                 compatible = "regulator-fixed";
  64                 regulator-name = "3P3V";
  65                 regulator-min-microvolt = <3300000>;
  66                 regulator-max-microvolt = <3300000>;
  67         };
  68
  69         reg_usb_otg_vbus: regulator-usbotgvbus {
  70                 compatible = "regulator-fixed";
  71                 regulator-name = "usb_otg_vbus";
  72                 regulator-min-microvolt = <5000000>;
  73                 regulator-max-microvolt = <5000000>;
  74                 gpio = <&gpio3 22 GPIO_ACTIVE_LOW>;
  75         };
  76 };
  77
  78 &audmux {
  79         pinctrl-names = "default";
  80         pinctrl-0 = <&pinctrl_audmux>;
  81         status = "okay";
  82 };
  83
  84 &clks {
  85         fsl,pmic-stby-poweroff;
  86 };
  87
  88 &fec {
  89         pinctrl-names = "default";
  90         pinctrl-0 = <&pinctrl_enet>;
  91         phy-mode = "rgmii-id";
  92         phy-handle = <&rgmii_phy>;
  93         interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
  94                               <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
  95         fsl,err006687-workaround-present;
  96         status = "okay";
  97
  98         mdio {
  99                 #address-cells = <1>;
 100                 #size-cells = <0>;
 101
 102                 /* Atheros AR8035 PHY */
 103                 rgmii_phy: ethernet-phy@4 {
 104                         reg = <4>;
 105                         interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
 106                         reset-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;
 107                         reset-assert-us = <10000>;
 108                         reset-deassert-us = <1000>;
 109                 };
 110         };
 111 };
 112
 113 &gpio1 {
 114         gpio-line-names =
 115                 "", "", "SD2_WP", "", "SD2_CD", "I2C3_SCL",
 116                         "I2C3_SDA", "I2C4_SCL",
 117                 "I2C4_SDA", "", "", "", "", "", "", "",
 118                 "", "PWM3", "", "", "", "", "", "",
 119                 "", "", "", "", "", "", "", "";
 120 };
 121
 122 &gpio3 {
 123         gpio-line-names =
 124                 "", "", "", "", "", "", "", "",
 125                 "", "", "", "", "", "", "", "",
 126                 "", "", "", "", "", "", "USB_OTG_VBUS", "",
 127                 "UART3_TXD", "UART3_RXD", "", "", "EIM_D28", "", "", "";
 128 };
 129
 130 &gpio4 {
 131         gpio-line-names =
 132                 "", "", "", "", "", "", "UART4_TXD", "UART4_RXD",
 133                 "UART5_TXD", "UART5_RXD", "", "", "", "", "", "",
 134                 "GPIO4_16", "GPIO4_17", "GPIO4_18", "GPIO4_19", "",
 135                         "CSPI3_CLK", "CSPI3_MOSI", "CSPI3_MISO",
 136                 "CSPI3_CS0", "CSPI3_CS1", "GPIO4_26", "GPIO4_27",
 137                         "CSPI3_RDY", "PWM1", "PWM2", "GPIO4_31";
 138 };
 139
 140 &gpio5 {
 141         gpio-line-names =
 142                 "", "", "EIM_A25", "", "", "GPIO5_05", "GPIO5_06",
 143                         "GPIO5_07",
 144                 "GPIO5_08", "CSPI2_CS1", "CSPI2_MOSI", "CSPI2_MISO",
 145                         "CSPI2_CS0", "CSPI2_CLK", "", "",
 146                 "", "", "", "", "", "", "", "",
 147                 "", "", "", "", "", "", "", "";
 148 };
 149
 150 &gpio7 {
 151         gpio-line-names =
 152                 "SD3_CD", "SD3_WP", "", "", "", "", "", "",
 153                 "", "", "", "", "", "", "", "",
 154                 "", "", "", "", "", "", "", "",
 155                 "", "", "", "", "", "", "", "";
 156 };
 157
 158 &hdmi {
 159         ddc-i2c-bus = <&i2c2>;
 160         status = "okay";
 161 };
 162
 163 &i2c1 {
 164         clock-frequency = <100000>;
 165         pinctrl-names = "default";
 166         pinctrl-0 = <&pinctrl_i2c1>;
 167         status = "okay";
 168
 169         codec: sgtl5000@a {
 170                 compatible = "fsl,sgtl5000";
 171                 reg = <0x0a>;
 172                 clocks = <&clks IMX6QDL_CLK_CKO>;
 173                 VDDA-supply = <&reg_2p5v>;
 174                 VDDIO-supply = <&reg_3p3v>;
 175         };
 176
 177         pmic: pf0100@8 {
 178                 compatible = "fsl,pfuze100";
 179                 reg = <0x08>;
 180                 interrupt-parent = <&gpio5>;
 181                 interrupts = <16 8>;
 182                 fsl,pmic-stby-poweroff;
 183
 184                 regulators {
 185                         reg_vddcore: sw1ab {                            /* VDDARM_IN */
 186                                 regulator-min-microvolt = <300000>;
 187                                 regulator-max-microvolt = <1875000>;
 188                                 regulator-always-on;
 189                         };
 190
 191                         reg_vddsoc: sw1c {                              /* VDDSOC_IN */
 192                                 regulator-min-microvolt = <300000>;
 193                                 regulator-max-microvolt = <1875000>;
 194                                 regulator-always-on;
 195                         };
 196
 197                         reg_gen_3v3: sw2 {                              /* VDDHIGH_IN */
 198                                 regulator-min-microvolt = <800000>;
 199                                 regulator-max-microvolt = <3300000>;
 200                                 regulator-always-on;
 201                         };
 202
 203                         reg_ddr_1v5a: sw3a {                            /* NVCC_DRAM, NVCC_RGMII */
 204                                 regulator-min-microvolt = <400000>;
 205                                 regulator-max-microvolt = <1975000>;
 206                                 regulator-always-on;
 207                         };
 208
 209                         reg_ddr_1v5b: sw3b {                            /* NVCC_DRAM, NVCC_RGMII */
 210                                 regulator-min-microvolt = <400000>;
 211                                 regulator-max-microvolt = <1975000>;
 212                                 regulator-always-on;
 213                         };
 214
 215                         reg_ddr_vtt: sw4 {                              /* MIPI conn */
 216                                 regulator-min-microvolt = <400000>;
 217                                 regulator-max-microvolt = <1975000>;
 218                                 regulator-always-on;
 219                         };
 220
 221                         reg_5v_600mA: swbst {                           /* not used */
 222                                 regulator-min-microvolt = <5000000>;
 223                                 regulator-max-microvolt = <5150000>;
 224                         };
 225
 226                         reg_snvs_3v: vsnvs {                            /* VDD_SNVS_IN */
 227                                 regulator-min-microvolt = <1500000>;
 228                                 regulator-max-microvolt = <3000000>;
 229                                 regulator-always-on;
 230                         };
 231
 232                         vref_reg: vrefddr {                             /* VREF_DDR */
 233                                 regulator-boot-on;
 234                                 regulator-always-on;
 235                         };
 236
 237                         reg_vgen1_1v5: vgen1 {                          /* not used */
 238                                 regulator-min-microvolt = <800000>;
 239                                 regulator-max-microvolt = <1550000>;
 240                         };
 241
 242                         reg_vgen2_1v2_eth: vgen2 {                      /* pcie ? */
 243                                 regulator-min-microvolt = <800000>;
 244                                 regulator-max-microvolt = <1550000>;
 245                                 regulator-always-on;
 246                         };
 247
 248                         reg_vgen3_2v8: vgen3 {                          /* not used */
 249                                 regulator-min-microvolt = <1800000>;
 250                                 regulator-max-microvolt = <3300000>;
 251                         };
 252                         reg_vgen4_1v8: vgen4 {                          /* NVCC_SD3 */
 253                                 regulator-min-microvolt = <1800000>;
 254                                 regulator-max-microvolt = <3300000>;
 255                                 regulator-always-on;
 256                         };
 257
 258                         reg_vgen5_2v5_sgtl: vgen5 {                     /* Pwr LED & 5V0_delayed enable */
 259                                 regulator-min-microvolt = <1800000>;
 260                                 regulator-max-microvolt = <3300000>;
 261                                 regulator-always-on;
 262                         };
 263
 264                         reg_vgen6_3v3: vgen6 {                          /* #V#_DELAYED enable, MIPI */
 265                                 regulator-min-microvolt = <1800000>;
 266                                 regulator-max-microvolt = <3300000>;
 267                                 regulator-always-on;
 268                         };
 269                 };
 270         };
 271 };
 272
 273 &i2c2 {
 274         clock-frequency = <100000>;
 275         pinctrl-names = "default";
 276         pinctrl-0 = <&pinctrl_i2c2>;
 277         status = "okay";
 278 };
 279
 280 &i2c4 {
 281         clock-frequency = <100000>;
 282         pinctrl-names = "default";
 283         pinctrl-0 = <&pinctrl_i2c4>;
 284         clocks = <&clks 116>;
 285         status = "okay";
 286 };
 287
 288 &pwm1 {
 289         pinctrl-names = "default";
 290         pinctrl-0 = <&pinctrl_pwm1>;
 291         status = "okay";
 292 };
 293
 294 &pwm2 {
 295         pinctrl-names = "default";
 296         pinctrl-0 = <&pinctrl_pwm2>;
 297         status = "okay";
 298 };
 299
 300 &pwm3 {
 301         pinctrl-names = "default";
 302         pinctrl-0 = <&pinctrl_pwm3>;
 303         status = "okay";
 304 };
 305
 306 &pwm4 {
 307         pinctrl-names = "default";
 308         pinctrl-0 = <&pinctrl_pwm4>;
 309         status = "okay";
 310 };
 311
 312 &ssi1 {
 313         status = "okay";
 314 };
 315
 316 &uart1 {
 317         pinctrl-names = "default";
 318         pinctrl-0 = <&pinctrl_uart1>;
 319         status = "okay";
 320 };
 321
 322 &uart2 {
 323         pinctrl-names = "default";
 324         pinctrl-0 = <&pinctrl_uart2>;
 325         status = "okay";
 326 };
 327
 328 &uart3 {
 329         pinctrl-names = "default";
 330         pinctrl-0 = <&pinctrl_uart3>;
 331         status = "okay";
 332 };
 333
 334 &uart4 {
 335         pinctrl-names = "default";
 336         pinctrl-0 = <&pinctrl_uart4>;
 337         status = "okay";
 338 };
 339
 340 &uart5 {
 341         pinctrl-names = "default";
 342         pinctrl-0 = <&pinctrl_uart5>;
 343         status = "okay";
 344 };
 345
 346 &usbh1 {
 347         dr_mode = "host";
 348         disable-over-current;
 349         status = "okay";
 350 };
 351
 352 &usbotg {
 353         vbus-supply = <&reg_usb_otg_vbus>;
 354         pinctrl-names = "default";
 355         pinctrl-0 = <&pinctrl_usbotg>;
 356         disable-over-current;
 357         dr_mode = "otg";
 358         status = "okay";
 359 };
 360
 361 &usdhc2 {
 362         pinctrl-names = "default";
 363         pinctrl-0 = <&pinctrl_usdhc2>;
 364         cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 365         wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
 366         vmmc-supply = <&reg_3p3v>;
 367         status = "okay";
 368 };
 369
 370 &usdhc3 {
 371         pinctrl-names = "default";
 372         pinctrl-0 = <&pinctrl_usdhc3>;
 373         cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
 374         wp-gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 375         vmmc-supply = <&reg_3p3v>;
 376         status = "okay";
 377 };
 378
 379 &usdhc4 {
 380         pinctrl-names = "default";
 381         pinctrl-0 = <&pinctrl_usdhc4>;
 382         vmmc-supply = <&reg_3p3v>;
 383         non-removable;
 384         status = "okay";
 385 };
 386
 387 &iomuxc {
 388         pinctrl-names = "default";
 389
 390         imx6-riotboard {
 391                 pinctrl_audmux: audmuxgrp {
 392                         fsl,pins = <
 393                                 MX6QDL_PAD_CSI0_DAT7__AUD3_RXD          0x130b0
 394                                 MX6QDL_PAD_CSI0_DAT4__AUD3_TXC          0x130b0
 395                                 MX6QDL_PAD_CSI0_DAT5__AUD3_TXD          0x110b0
 396                                 MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS         0x130b0
 397                                 MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0         /* CAM_MCLK */
 398                         >;
 399                 };
 400
 401                 pinctrl_ecspi1: ecspi1grp {
 402                         fsl,pins = <
 403                                 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 404                                 MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 405                                 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 406                                 MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17      0x000b1         /* CS0 */
 407                         >;
 408                 };
 409
 410                 pinctrl_ecspi2: ecspi2grp {
 411                         fsl,pins = <
 412                                 MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09      0x000b1         /* CS1 */
 413                                 MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI     0x100b1
 414                                 MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO     0x100b1
 415                                 MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12      0x000b1         /* CS0 */
 416                                 MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK     0x100b1
 417                         >;
 418                 };
 419
 420                 pinctrl_ecspi3: ecspi3grp {
 421                         fsl,pins = <
 422                                 MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK      0x100b1
 423                                 MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI      0x100b1
 424                                 MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO      0x100b1
 425                                 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24       0x000b1         /* CS0 */
 426                                 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25       0x000b1         /* CS1 */
 427                         >;
 428                 };
 429
 430                 pinctrl_enet: enetgrp {
 431                         fsl,pins = <
 432                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 433                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 434                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 435                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 436                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 437                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 438                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 439                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 440                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x0a0b1         /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
 441                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030         /* AR8035 pin strapping: IO voltage: pull up */
 442                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x13030         /* AR8035 pin strapping: PHYADDR#0: pull down */
 443                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x13030         /* AR8035 pin strapping: PHYADDR#1: pull down */
 444                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030         /* AR8035 pin strapping: MODE#1: pull up */
 445                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030         /* AR8035 pin strapping: MODE#3: pull up */
 446                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x130b0         /* AR8035 pin strapping: MODE#0: pull down */
 447                                 MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8      /* GPIO16 -> AR8035 25MHz */
 448                                 MX6QDL_PAD_EIM_D31__GPIO3_IO31          0x130b0         /* RGMII_nRST */
 449                                 MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x180b0         /* AR8035 interrupt */
 450                                 MX6QDL_PAD_GPIO_6__ENET_IRQ             0x000b1
 451                         >;
 452                 };
 453
 454                 pinctrl_i2c1: i2c1grp {
 455                         fsl,pins = <
 456                                 MX6QDL_PAD_CSI0_DAT8__I2C1_SDA          0x4001b8b1
 457                                 MX6QDL_PAD_CSI0_DAT9__I2C1_SCL          0x4001b8b1
 458                         >;
 459                 };
 460
 461                 pinctrl_i2c2: i2c2grp {
 462                         fsl,pins = <
 463                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 464                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 465                         >;
 466                 };
 467
 468                 pinctrl_i2c3: i2c3grp {
 469                         fsl,pins = <
 470                                 MX6QDL_PAD_GPIO_5__I2C3_SCL             0x4001b8b1
 471                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 472                         >;
 473                 };
 474
 475                 pinctrl_i2c4: i2c4grp {
 476                         fsl,pins = <
 477                                 MX6QDL_PAD_GPIO_7__I2C4_SCL             0x4001b8b1
 478                                 MX6QDL_PAD_GPIO_8__I2C4_SDA             0x4001b8b1
 479                         >;
 480                 };
 481
 482                 pinctrl_led: ledgrp {
 483                         fsl,pins = <
 484                                 MX6QDL_PAD_EIM_A25__GPIO5_IO02          0x1b0b1 /* user led0 */
 485                                 MX6QDL_PAD_EIM_D28__GPIO3_IO28          0x1b0b1 /* user led1 */
 486                         >;
 487                 };
 488
 489                 pinctrl_pwm1: pwm1grp {
 490                         fsl,pins = <
 491                                 MX6QDL_PAD_DISP0_DAT8__PWM1_OUT         0x1b0b1
 492                         >;
 493                 };
 494
 495                 pinctrl_pwm2: pwm2grp {
 496                         fsl,pins = <
 497                                 MX6QDL_PAD_DISP0_DAT9__PWM2_OUT         0x1b0b1
 498                         >;
 499                 };
 500
 501                 pinctrl_pwm3: pwm3grp {
 502                         fsl,pins = <
 503                                 MX6QDL_PAD_SD1_DAT1__PWM3_OUT           0x1b0b1
 504                         >;
 505                 };
 506
 507                 pinctrl_pwm4: pwm4grp {
 508                         fsl,pins = <
 509                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
 510                         >;
 511                 };
 512
 513                 pinctrl_uart1: uart1grp {
 514                         fsl,pins = <
 515                                 MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA    0x1b0b1
 516                                 MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1
 517                         >;
 518                 };
 519
 520                 pinctrl_uart2: uart2grp {
 521                         fsl,pins = <
 522                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 523                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 524                         >;
 525                 };
 526
 527                 pinctrl_uart3: uart3grp {
 528                         fsl,pins = <
 529                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 530                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 531                         >;
 532                 };
 533
 534                 pinctrl_uart4: uart4grp {
 535                         fsl,pins = <
 536                                 MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
 537                                 MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
 538                         >;
 539                 };
 540
 541                 pinctrl_uart5: uart5grp {
 542                         fsl,pins = <
 543                                 MX6QDL_PAD_KEY_COL1__UART5_TX_DATA      0x1b0b1
 544                                 MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA      0x1b0b1
 545                         >;
 546                 };
 547
 548                 pinctrl_usbotg: usbotggrp {
 549                         fsl,pins = <
 550                                 MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID       0x17059
 551                                 MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */
 552                                 MX6QDL_PAD_EIM_D21__USB_OTG_OC          0x1b0b0
 553                         >;
 554                 };
 555
 556                 pinctrl_usdhc2: usdhc2grp {
 557                         fsl,pins = <
 558                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 559                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 560                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 561                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 562                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 563                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 564                                 MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b0 /* SD2 CD */
 565                                 MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x1f0b0 /* SD2 WP */
 566                         >;
 567                 };
 568
 569                 pinctrl_usdhc3: usdhc3grp {
 570                         fsl,pins = <
 571                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 572                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 573                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 574                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 575                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 576                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 577                                 MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0 /* SD3 CD */
 578                                 MX6QDL_PAD_SD3_DAT4__GPIO7_IO01         0x1f0b0 /* SD3 WP */
 579                         >;
 580                 };
 581
 582                 pinctrl_usdhc4: usdhc4grp {
 583                         fsl,pins = <
 584                                 MX6QDL_PAD_SD4_CMD__SD4_CMD             0x17059
 585                                 MX6QDL_PAD_SD4_CLK__SD4_CLK             0x10059
 586                                 MX6QDL_PAD_SD4_DAT0__SD4_DATA0          0x17059
 587                                 MX6QDL_PAD_SD4_DAT1__SD4_DATA1          0x17059
 588                                 MX6QDL_PAD_SD4_DAT2__SD4_DATA2          0x17059
 589                                 MX6QDL_PAD_SD4_DAT3__SD4_DATA3          0x17059
 590                                 MX6QDL_PAD_NANDF_ALE__GPIO6_IO08        0x17059 /* SD4 RST (eMMC) */
 591                         >;
 592                 };
 593         };
 594 };