arch/arm/dts/imx6dl-b1x5v2.dts

   1 /*
   2  * GE B1x5v2 Patient Monitor
   3  *
   4  * Copyright 2018-2020 GE Inc.
   5  * Copyright 2018-2020 Collabora Ltd.
   6  *
   7  * SPDX-License-Identifier:    GPL-2.0+
   8  */
   9
  10 /dts-v1/;
  11
  12 #include "imx6dl.dtsi"
  13 #include <dt-bindings/gpio/gpio.h>
  14
  15 / {
  16         compatible = "ge,imx6dl-b1x5v2", "congatec,qmx6", "fsl,imx6dl";
  17
  18         chosen {
  19                 bootargs = "console=ttymxc2,115200";
  20                 stdout-path = &uart3;
  21         };
  22
  23         reg_3p3v: 3p3v {
  24                 compatible = "regulator-fixed";
  25                 regulator-name = "3P3V";
  26                 regulator-min-microvolt = <3300000>;
  27                 regulator-max-microvolt = <3300000>;
  28                 regulator-always-on;
  29         };
  30
  31         reg_5v: regulator-5v {
  32                 compatible = "regulator-fixed";
  33                 regulator-name = "5V";
  34                 regulator-min-microvolt = <5000000>;
  35                 regulator-max-microvolt = <5000000>;
  36                 regulator-always-on;
  37         };
  38
  39         reg_5v0_audio: regulator-5v0-audio {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "5V0_AUDIO";
  42                 regulator-min-microvolt = <5000000>;
  43                 regulator-max-microvolt = <5000000>;
  44                 vin-supply = <&reg_5v>;
  45
  46                 gpio = <&tca6424a 16 GPIO_ACTIVE_HIGH>;
  47                 enable-active-high;
  48
  49                 /*
  50                  * This must be always-on for da7212, which has some not properly
  51                  * documented dependencies for it's speaker supply pin. The issue
  52                  * manifests as speaker volume being very low.
  53                  */
  54                 regulator-always-on;
  55                 regulator-boot-on;
  56         };
  57
  58         reg_lcd: regulator-lcd {
  59                 compatible = "regulator-fixed";
  60                 regulator-name = "LED_VCC";
  61                 regulator-min-microvolt = <12000000>;
  62                 regulator-max-microvolt = <12000000>;
  63
  64                 pinctrl-0 = <&pinctrl_q7_lcd_power>;
  65                 pinctrl-names = "default";
  66                 gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; // LCDPWR
  67                 enable-active-high;
  68         };
  69
  70         usb_power: regulator-usb-power {
  71                 compatible = "regulator-fixed";
  72                 regulator-name = "USB POWER";
  73                 regulator-min-microvolt = <5000000>;
  74                 regulator-max-microvolt = <5000000>;
  75                 vin-supply = <&reg_5v>;
  76         };
  77
  78         backlight: backlight {
  79                 compatible = "pwm-backlight";
  80                 pinctrl-names = "default";
  81                 pinctrl-0 = <&pinctrl_q7_backlight_enable>;
  82                 power-supply = <&reg_lcd>;
  83                 pwms = <&pwm4 0 5000000>;
  84                 brightness-levels = <0 4 8 16 32 64 128 255>;
  85                 default-brightness-level = <7>;
  86                 enable-gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
  87         };
  88
  89         panel {
  90                 compatible = "simple-panel";
  91                 backlight = <&backlight>;
  92
  93                 port {
  94                         panel_in: endpoint {
  95                                 remote-endpoint = <&lvds0_out>;
  96                         };
  97                 };
  98         };
  99
 100         bootcount {
 101                 compatible = "u-boot,bootcount-spi-flash";
 102                 spi-flash = <&flash>;
 103                 offset = <0x01003fe>;
 104         };
 105
 106         leds {
 107                 compatible = "gpio-leds";
 108                 pinctrl-names = "default";
 109                 pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
 110
 111                 alarm1 {
 112                         label = "alarm:red";
 113                         gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
 114                 };
 115
 116                 alarm2 {
 117                         label = "alarm:yellow";
 118                         gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
 119                 };
 120
 121                 alarm3 {
 122                         label = "alarm:blue";
 123                         gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
 124                 };
 125         };
 126
 127         poweroff {
 128                 compatible = "gpio-poweroff";
 129                 pinctrl-names = "default";
 130                 pinctrl-0 = <&pinctrl_q7_spi_cs1>;
 131                 gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
 132                 active-delay-ms = <1000>;
 133                 inactive-delay-ms = <0>;
 134                 timeout-ms = <5000>;
 135         };
 136
 137         i2cmux {
 138                 compatible = "i2c-mux-gpio";
 139                 #address-cells = <1>;
 140                 #size-cells = <0>;
 141                 pinctrl-names = "default";
 142                 pinctrl-0 = <&pinctrl_i2cmux>;
 143                 mux-gpios = <&gpio6 9 GPIO_ACTIVE_HIGH>;
 144                 i2c-parent = <&i2c2>;
 145                 idle-state = <1>;
 146
 147                 i2c5: i2c@0 {
 148                         reg = <0>;
 149                         #address-cells = <1>;
 150                         #size-cells = <0>;
 151
 152                         tmp112: temperature-sensor@48 {
 153                                 compatible = "ti,tmp112";
 154                                 reg = <0x48>;
 155                                 interrupt-parent = <&tca6424a>;
 156                                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 157                         };
 158
 159                         tca6424a: gpio-controller@22 {
 160                                 compatible = "ti,tca6424";
 161                                 reg = <0x22>;
 162                                 gpio-controller;
 163                                 #gpio-cells = <2>;
 164
 165                                 interrupt-parent = <&gpio7>;
 166                                 interrupts = <11 IRQ_TYPE_EDGE_RISING>;
 167                                 pinctrl-names = "default";
 168                                 pinctrl-0 = <&pinctrl_q7_gpio6>;
 169                                 interrupt-controller;
 170                                 #interrupt-cells = <2>;
 171
 172                                 gpio-line-names = "GPIO_ROTOR#", "", "TMP_SENSOR_IRQ", "ACM_GPIO1", "ACM_GPIO2", "BATT_T", "", "",
 173                                                   "ACM_GPIO3", "ACM_GPIO4", "USB1_POWER_EN", "EGPIO_CC_CTL0", "EGPIO_CC_CTL1", "12V_OEMNBP_EN", "CP2105_RST", "",
 174                                                   "SPEAKER_PA_EN", "ARM7_UPI_RESET", "ARM7_PWR_RST", "NURSE_CALL", "MARKER_EN", "EGPIO_TOUCH_RST", "", "";
 175                         };
 176                 };
 177
 178                 i2c6: i2c@1 {
 179                         reg = <1>;
 180                         #address-cells = <1>;
 181                         #size-cells = <0>;
 182
 183                         pmic: pmic@08 {
 184                                 compatible = "fsl,pfuze100";
 185                                 reg = <0x08>;
 186                         };
 187                 };
 188         };
 189 };
 190
 191 &usbh1 {
 192         /* Connected to USB-Hub SMSC USB2514, provides P0, P2, P3, P4 on Qseven connector */
 193         vbus-supply = <&reg_5v>;
 194         status = "okay";
 195 };
 196
 197 &usbotg {
 198         pinctrl-names = "default";
 199         pinctrl-0 = <&pinctrl_usbotg>;
 200         vbus-supply = <&usb_power>;
 201         disable-over-current;
 202         dr_mode = "host";
 203         status = "okay";
 204 };
 205
 206 &pmic {
 207         regulators {
 208                 sw1a_reg: sw1ab {
 209                         regulator-min-microvolt = <300000>;
 210                         regulator-max-microvolt = <1875000>;
 211                         regulator-boot-on;
 212                         regulator-always-on;
 213                         regulator-ramp-delay = <6250>;
 214                 };
 215
 216                 sw1c_reg: sw1c {
 217                         regulator-min-microvolt = <300000>;
 218                         regulator-max-microvolt = <1875000>;
 219                         regulator-boot-on;
 220                         regulator-always-on;
 221                         regulator-ramp-delay = <6250>;
 222                 };
 223
 224                 sw2_reg: sw2 {
 225                         regulator-min-microvolt = <800000>;
 226                         regulator-max-microvolt = <3300000>;
 227                         regulator-boot-on;
 228                         regulator-always-on;
 229                 };
 230
 231                 sw3a_reg: sw3a {
 232                         regulator-min-microvolt = <400000>;
 233                         regulator-max-microvolt = <1975000>;
 234                         regulator-boot-on;
 235                         regulator-always-on;
 236                 };
 237
 238                 sw3b_reg: sw3b {
 239                         regulator-min-microvolt = <400000>;
 240                         regulator-max-microvolt = <1975000>;
 241                         regulator-boot-on;
 242                         regulator-always-on;
 243                 };
 244
 245                 sw4_reg: sw4 {
 246                         regulator-min-microvolt = <675000>;
 247                         regulator-max-microvolt = <3300000>;
 248                         regulator-boot-on;
 249                         regulator-always-on;
 250                 };
 251
 252                 swbst_reg: swbst {
 253                         regulator-min-microvolt = <5000000>;
 254                         regulator-max-microvolt = <5150000>;
 255                 };
 256
 257                 snvs_reg: vsnvs {
 258                         regulator-min-microvolt = <1000000>;
 259                         regulator-max-microvolt = <3000000>;
 260                         regulator-boot-on;
 261                         regulator-always-on;
 262                 };
 263
 264                 vref_reg: vrefddr {
 265                         regulator-boot-on;
 266                         regulator-always-on;
 267                 };
 268
 269                 /* keep VGEN3, VGEN4 and VGEN5 enabled in order to maintain backward compatibility with hw-rev. A.0 */
 270                 vgen3_reg: vgen3 {
 271                         regulator-min-microvolt = <1800000>;
 272                         regulator-max-microvolt = <3300000>;
 273                         regulator-always-on;
 274                 };
 275
 276                 vgen4_reg: vgen4 {
 277                         regulator-min-microvolt = <2500000>;
 278                         regulator-max-microvolt = <2500000>;
 279                         regulator-always-on;
 280                 };
 281
 282                 vgen5_reg: vgen5 {
 283                         regulator-min-microvolt = <1800000>;
 284                         regulator-max-microvolt = <3300000>;
 285                         regulator-always-on;
 286                 };
 287
 288                 /* supply voltage for eMMC */
 289                 vgen6_reg: vgen6 {
 290                         regulator-min-microvolt = <1800000>;
 291                         regulator-max-microvolt = <1800000>;
 292                         regulator-boot-on;
 293                         regulator-always-on;
 294                 };
 295         };
 296 };
 297
 298 &uart2 {
 299         pinctrl-names = "default";
 300         pinctrl-0 = <&pinctrl_uart2>;
 301         status = "okay";
 302 };
 303
 304 &uart3 {
 305         pinctrl-names = "default";
 306         pinctrl-0 = <&pinctrl_uart3>;
 307         status = "okay";
 308 };
 309
 310 &usdhc2 {
 311         /* MicroSD card slot */
 312         pinctrl-names = "default";
 313         pinctrl-0 = <&pinctrl_usdhc2>;
 314         cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 315         no-1-8-v;
 316         keep-power-in-suspend;
 317         wakeup-source;
 318         vmmc-supply = <&reg_3p3v>;
 319         status = "okay";
 320 };
 321
 322 &usdhc3 {
 323         /* eMMC module */
 324         pinctrl-names = "default";
 325         pinctrl-0 = <&pinctrl_usdhc3>;
 326         non-removable;
 327         bus-width = <8>;
 328         no-1-8-v;
 329         keep-power-in-suspend;
 330         wakeup-source;
 331         vmmc-supply = <&reg_3p3v>;
 332         status = "okay";
 333 };
 334
 335 &i2c1 {
 336         status = "okay";
 337         pinctrl-names = "default", "gpio";
 338         pinctrl-0 = <&pinctrl_i2c1>;
 339         pinctrl-1 = <&pinctrl_i2c1_gpio>;
 340         scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 341         sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 342
 343         clock-frequency = <100000>;
 344 };
 345
 346 &i2c2 {
 347         status = "okay";
 348         pinctrl-names = "default", "gpio";
 349         pinctrl-0 = <&pinctrl_i2c2>;
 350         pinctrl-1 = <&pinctrl_i2c2_gpio>;
 351         scl-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
 352         sda-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>;
 353
 354         clock-frequency = <100000>;
 355 };
 356
 357 &i2c3 {
 358         status = "okay";
 359         pinctrl-names = "default", "gpio";
 360         pinctrl-0 = <&pinctrl_i2c3>;
 361         pinctrl-1 = <&pinctrl_i2c3_gpio>;
 362         scl-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
 363         sda-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
 364
 365         clock-frequency = <100000>;
 366
 367         rtc: m41t62@68 {
 368                 compatible = "st,m41t62";
 369                 reg = <0x68>;
 370         };
 371 };
 372
 373 &ldb {
 374         status = "okay";
 375
 376         lvds0: lvds-channel@0 {
 377                 status = "okay";
 378                 fsl,data-mapping = "spwg";
 379                 fsl,data-width = <24>;
 380
 381                 port@4 {
 382                         reg = <4>;
 383                         lvds0_out: endpoint {
 384                                 remote-endpoint = <&panel_in>;
 385                         };
 386                 };
 387         };
 388 };
 389
 390 &hdmi {
 391         status = "okay";
 392 };
 393
 394 &fec {
 395         pinctrl-names = "default";
 396         pinctrl-0 = <&pinctrl_enet &pinctrl_phy_reset>;
 397         phy-mode = "rgmii-id";
 398         phy-handle = <&phy>;
 399         status = "okay";
 400
 401         fsl,magic-packet;
 402
 403         mdio {
 404                 #address-cells = <1>;
 405                 #size-cells = <0>;
 406
 407                 phy: ethernet-phy@6 {
 408                         compatible = "ethernet-phy-ieee802.3-c22";
 409                         reg = <6>;
 410                         qca,clk-out-frequency = <125000000>;
 411                         reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
 412                         reset-assert-us = <2000>;
 413                 };
 414         };
 415 };
 416
 417 &ecspi1 {
 418         pinctrl-names = "default";
 419         pinctrl-0 = <&pinctrl_ecspi1>;
 420         status = "okay";
 421
 422         num-cs = <1>;
 423         cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 424
 425         flash: m25p80@0 {
 426                 #address-cells = <1>;
 427                 #size-cells = <1>;
 428                 compatible = "st,sst25vf032b", "jedec,spi-nor";
 429                 spi-max-frequency = <20000000>;
 430                 reg = <0>;
 431
 432                 partition@0 {
 433                         label = "bootloader";
 434                         reg = <0x0000000 0x100000>;
 435                 };
 436
 437                 partition@100000 {
 438                         label = "user";
 439                         reg = <0x0100000 0x2fc000>;
 440                 };
 441
 442                 partition@3fc000 {
 443                         label = "reserved";
 444                         reg = <0x03fc000 0x4000>;
 445                         read-only;
 446                 };
 447         };
 448 };
 449
 450 &pwm4 {
 451         pinctrl-names = "default";
 452         pinctrl-0 = <&pinctrl_pwm4>;
 453         status = "okay";
 454 };
 455
 456 &wdog1 {
 457         pinctrl-names = "default";
 458         pinctrl-0 = <&pinctrl_wdog>;
 459         fsl,ext-reset-output;
 460 };
 461
 462 &iomuxc {
 463         imx6qdl-congatec-qmx6 {
 464                 pinctrl_uart2: uart2grp {
 465                         fsl,pins = <
 466                                 MX6QDL_PAD_EIM_D26__UART2_TX_DATA       0x1b0b1
 467                                 MX6QDL_PAD_EIM_D27__UART2_RX_DATA       0x1b0b1
 468                         >;
 469                 };
 470
 471                 pinctrl_uart3: uart3grp {
 472                         fsl,pins = <
 473                                 MX6QDL_PAD_EIM_D25__UART3_RX_DATA       0x1b0b1
 474                                 MX6QDL_PAD_EIM_D24__UART3_TX_DATA       0x1b0b1
 475                         >;
 476                 };
 477
 478                 pinctrl_wdog: wdoggrp {
 479                         fsl,pins = <
 480                                 MX6QDL_PAD_DISP0_DAT8__WDOG1_B          0x1b0b0
 481                         >;
 482                 };
 483
 484                 pinctrl_usdhc2: usdhc2grp {
 485                         fsl,pins = <
 486                                 MX6QDL_PAD_SD2_CMD__SD2_CMD             0x17059
 487                                 MX6QDL_PAD_SD2_CLK__SD2_CLK             0x10059
 488                                 MX6QDL_PAD_SD2_DAT0__SD2_DATA0          0x17059
 489                                 MX6QDL_PAD_SD2_DAT1__SD2_DATA1          0x17059
 490                                 MX6QDL_PAD_SD2_DAT2__SD2_DATA2          0x17059
 491                                 MX6QDL_PAD_SD2_DAT3__SD2_DATA3          0x17059
 492                         >;
 493                 };
 494
 495                 pinctrl_usdhc2_cd: sd2cdgrp {
 496                         fsl,pins = <
 497                                 MX6QDL_PAD_GPIO_4__GPIO1_IO04           0x1b0b0
 498                         >;
 499                 };
 500
 501                 pinctrl_usdhc3: usdhc4grp {
 502                         fsl,pins = <
 503                                 MX6QDL_PAD_SD3_CMD__SD3_CMD             0x17059
 504                                 MX6QDL_PAD_SD3_CLK__SD3_CLK             0x10059
 505                                 MX6QDL_PAD_SD3_DAT0__SD3_DATA0          0x17059
 506                                 MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
 507                                 MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
 508                                 MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
 509                                 MX6QDL_PAD_SD3_DAT4__SD3_DATA4          0x17059
 510                                 MX6QDL_PAD_SD3_DAT5__SD3_DATA5          0x17059
 511                                 MX6QDL_PAD_SD3_DAT6__SD3_DATA6          0x17059
 512                                 MX6QDL_PAD_SD3_DAT7__SD3_DATA7          0x17059
 513                         >;
 514                 };
 515
 516                 pinctrl_i2c1: i2c1grp {
 517                         fsl,pins = <
 518                                 MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
 519                                 MX6QDL_PAD_EIM_D28__I2C1_SDA            0x4001b8b1
 520                         >;
 521                 };
 522
 523                 pinctrl_i2c1_gpio: i2c1gpiogrp {
 524                         fsl,pins = <
 525                                 MX6QDL_PAD_EIM_D21__GPIO3_IO21          0x1b0b0
 526                                 MX6QDL_PAD_EIM_D28__GPIO3_IO28          0x1b0b0
 527                         >;
 528                 };
 529
 530                 pinctrl_i2c2: i2c2grp {
 531                         fsl,pins = <
 532                                 MX6QDL_PAD_KEY_COL3__I2C2_SCL           0x4001b8b1
 533                                 MX6QDL_PAD_KEY_ROW3__I2C2_SDA           0x4001b8b1
 534                         >;
 535                 };
 536
 537                 pinctrl_i2c2_gpio: i2c2gpiogrp {
 538                         fsl,pins = <
 539                                 MX6QDL_PAD_KEY_COL3__GPIO4_IO12         0x1b0b0
 540                                 MX6QDL_PAD_KEY_ROW3__GPIO4_IO13         0x1b0b0
 541                         >;
 542                 };
 543
 544                 pinctrl_i2c3: i2c3grp {
 545                         fsl,pins = <
 546                                 MX6QDL_PAD_GPIO_3__I2C3_SCL             0x4001b8b1
 547                                 MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
 548                         >;
 549                 };
 550
 551                 pinctrl_i2c3_gpio: i2c3gpiogrp {
 552                         fsl,pins = <
 553                                 MX6QDL_PAD_GPIO_3__GPIO1_IO03           0x1b0b0
 554                                 MX6QDL_PAD_GPIO_6__GPIO1_IO06           0x1b0b0
 555                         >;
 556                 };
 557
 558                 pinctrl_ecspi1: ecspi1grp {
 559                         fsl,pins = <
 560                                 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
 561                                 MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
 562                                 MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
 563                                 MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x1b0b0
 564                         >;
 565                 };
 566
 567                 pinctrl_enet: enetgrp {
 568                         fsl,pins = <
 569                                 MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
 570                                 MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
 571                                 MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x1b030
 572                                 MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x1b030
 573                                 MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x1b030
 574                                 MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x1b030
 575                                 MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x1b030
 576                                 MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b030
 577                                 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
 578                                 MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
 579                                 MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
 580                                 MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
 581                                 MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
 582                                 MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
 583                                 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
 584                                 MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
 585                         >;
 586                 };
 587
 588                 pinctrl_phy_reset: phyrstgrp {
 589                         fsl,pins = <
 590                                 MX6QDL_PAD_EIM_D23__GPIO3_IO23          0x4001b0b0      /* RGMII Phy Reset */
 591                         >;
 592                 };
 593
 594                 pinctrl_pwm4: pwm4grp {
 595                         fsl,pins = <
 596                                 MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1         /* Q7[123] LVDS_BLT_CTRL */
 597                         >;
 598                 };
 599
 600                 pinctrl_q7_lcd_power: lcdpwrgrp {
 601                         fsl,pins = <
 602                                 MX6QDL_PAD_GPIO_7__GPIO1_IO07           0x4001b0b0      /* Q7[111] LVDS_PPEN */
 603                         >;
 604                 };
 605
 606                 pinctrl_q7_backlight_enable: blengrp {
 607                         fsl,pins = <
 608                                 MX6QDL_PAD_GPIO_9__GPIO1_IO09           0x4001b0b0      /* Q7[112] LVDS_BLEN */
 609                         >;
 610                 };
 611
 612                 pinctrl_q7_gpio1: q7gpio1grp {
 613                         fsl,pins = <
 614                                 MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x4001b0b0      /* Q7[186] GPIO1 */
 615                         >;
 616                 };
 617
 618                 pinctrl_q7_gpio3: q7gpio3grp {
 619                         fsl,pins = <
 620                                 MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27       0x4001b0b0      /* Q7[188] GPIO3 */
 621                         >;
 622                 };
 623
 624                 pinctrl_q7_gpio5: q7gpio5grp {
 625                         fsl,pins = <
 626                                 MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x4001b0b0      /* Q7[190] GPIO5 */
 627                         >;
 628                 };
 629
 630                 pinctrl_q7_gpio6: q7gpio6grp {
 631                         fsl,pins = <
 632                                 MX6QDL_PAD_GPIO_16__GPIO7_IO11          0x1b0b0         /* Q7[191] GPIO6 */
 633                         >;
 634                 };
 635
 636                 pinctrl_q7_spi_cs1: spics1grp {
 637                         fsl,pins = <
 638                                 MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25       0x4001b0b0      /* Q7[202] SPI_CS1# */
 639                         >;
 640                 };
 641
 642                 pinctrl_i2cmux: i2cmuxgrp {
 643                         fsl,pins = <
 644                                 MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09       0x4001b0b0
 645                         >;
 646                 };
 647
 648                 pinctrl_usbotg: usbotggrp {
 649                         fsl,pins = <
 650                                 MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059         /* Q7[92] USB_ID */
 651                         >;
 652                 };
 653         };
 654 };