arch/arm/dts/fsl-ls2080a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * NXP ls2080a SOC common device tree source
   4  *
   5  * Copyright 2020 NXP
   6  * Copyright 2013-2015 Freescale Semiconductor, Inc.
   7  */
   8
   9 / {
  10         compatible = "fsl,ls2080a";
  11         interrupt-parent = <&gic>;
  12         #address-cells = <2>;
  13         #size-cells = <2>;
  14
  15         memory@80000000 {
  16                 device_type = "memory";
  17                 reg = <0x00000000 0x80000000 0 0x80000000>;
  18                       /* DRAM space - 1, size : 2 GB DRAM */
  19         };
  20
  21         gic: interrupt-controller@6000000 {
  22                 compatible = "arm,gic-v3";
  23                 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
  24                       <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
  25                 #interrupt-cells = <3>;
  26                 interrupt-controller;
  27                 interrupts = <1 9 0x4>;
  28         };
  29
  30         gic_lpi_base: syscon@0x80000000 {
  31                 compatible = "gic-lpi-base";
  32                 reg = <0x0 0x80000000 0x0 0x100000>;
  33                 max-gic-redistributors = <8>;
  34         };
  35
  36         timer {
  37                 compatible = "arm,armv8-timer";
  38                 interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
  39                              <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
  40                              <1 11 0x8>, /* Virtual PPI, active-low */
  41                              <1 10 0x8>; /* Hypervisor PPI, active-low */
  42         };
  43
  44         serial0: serial@21c0500 {
  45                 device_type = "serial";
  46                 compatible = "fsl,ns16550", "ns16550a";
  47                 reg = <0x0 0x21c0500 0x0 0x100>;
  48                 clock-frequency = <0>;  /* Updated by bootloader */
  49                 interrupts = <0 32 0x1>; /* edge triggered */
  50         };
  51
  52         serial1: serial@21c0600 {
  53                 device_type = "serial";
  54                 compatible = "fsl,ns16550", "ns16550a";
  55                 reg = <0x0 0x21c0600 0x0 0x100>;
  56                 clock-frequency = <0>;  /* Updated by bootloader */
  57                 interrupts = <0 32 0x1>; /* edge triggered */
  58         };
  59
  60         i2c0: i2c@2000000 {
  61                 status = "disabled";
  62                 compatible = "fsl,vf610-i2c";
  63                 #address-cells = <1>;
  64                 #size-cells = <0>;
  65                 reg = <0x0 0x2000000 0x0 0x10000>;
  66                 interrupts = <0 34 0x4>; /* Level high type */
  67         };
  68
  69         i2c1: i2c@2010000 {
  70                 status = "disabled";
  71                 compatible = "fsl,vf610-i2c";
  72                 #address-cells = <1>;
  73                 #size-cells = <0>;
  74                 reg = <0x0 0x2010000 0x0 0x10000>;
  75                 interrupts = <0 34 0x4>; /* Level high type */
  76         };
  77
  78         i2c2: i2c@2020000 {
  79                 status = "disabled";
  80                 compatible = "fsl,vf610-i2c";
  81                 #address-cells = <1>;
  82                 #size-cells = <0>;
  83                 reg = <0x0 0x2020000 0x0 0x10000>;
  84                 interrupts = <0 35 0x4>; /* Level high type */
  85         };
  86
  87         i2c3: i2c@2030000 {
  88                 status = "disabled";
  89                 compatible = "fsl,vf610-i2c";
  90                 #address-cells = <1>;
  91                 #size-cells = <0>;
  92                 reg = <0x0 0x2030000 0x0 0x10000>;
  93                 interrupts = <0 35 0x4>; /* Level high type */
  94         };
  95
  96         dspi: dspi@2100000 {
  97                 compatible = "fsl,vf610-dspi";
  98                 #address-cells = <1>;
  99                 #size-cells = <0>;
 100                 reg = <0x0 0x2100000 0x0 0x10000>;
 101                 interrupts = <0 26 0x4>; /* Level high type */
 102                 num-cs = <6>;
 103         };
 104
 105         qspi: quadspi@1550000 {
 106                 compatible = "fsl,ls2080a-qspi";
 107                 #address-cells = <1>;
 108                 #size-cells = <0>;
 109                 reg = <0x0 0x20c0000 0x0 0x10000>,
 110                         <0x0 0x20000000 0x0 0x10000000>;
 111                 reg-names = "QuadSPI", "QuadSPI-memory";
 112                 status = "disabled";
 113         };
 114
 115         esdhc: esdhc@0 {
 116                 compatible = "fsl,esdhc";
 117                 reg = <0x0 0x2140000 0x0 0x10000>;
 118                 interrupts = <0 28 0x4>; /* Level high type */
 119                 little-endian;
 120                 bus-width = <4>;
 121         };
 122
 123         usb0: usb3@3100000 {
 124                 compatible = "fsl,layerscape-dwc3";
 125                 reg = <0x0 0x3100000 0x0 0x10000>;
 126                 interrupts = <0 80 0x4>; /* Level high type */
 127                 dr_mode = "host";
 128         };
 129
 130         usb1: usb3@3110000 {
 131                 compatible = "fsl,layerscape-dwc3";
 132                 reg = <0x0 0x3110000 0x0 0x10000>;
 133                 interrupts = <0 81 0x4>; /* Level high type */
 134                 dr_mode = "host";
 135         };
 136
 137         pcie1: pcie@3400000 {
 138                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 139                 reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
 140                        0x00 0x03480000 0x0 0x80000   /* lut registers */
 141                        0x10 0x00000000 0x0 0x20000>; /* configuration space */
 142                 reg-names = "dbi", "lut", "config";
 143                 #address-cells = <3>;
 144                 #size-cells = <2>;
 145                 device_type = "pci";
 146                 num-lanes = <4>;
 147                 bus-range = <0x0 0xff>;
 148                 ranges = <0x81000000 0x0 0x00000000 0x10 0x00020000 0x0 0x00010000   /* downstream I/O */
 149                           0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 150         };
 151
 152         pcie2: pcie@3500000 {
 153                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 154                 reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
 155                        0x00 0x03580000 0x0 0x80000   /* lut registers */
 156                        0x12 0x00000000 0x0 0x20000>; /* configuration space */
 157                 reg-names = "dbi", "lut", "config";
 158                 #address-cells = <3>;
 159                 #size-cells = <2>;
 160                 device_type = "pci";
 161                 num-lanes = <4>;
 162                 bus-range = <0x0 0xff>;
 163                 ranges = <0x81000000 0x0 0x00000000 0x12 0x00020000 0x0 0x00010000   /* downstream I/O */
 164                           0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 165         };
 166
 167         pcie3: pcie@3600000 {
 168                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 169                 reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
 170                        0x00 0x03680000 0x0 0x80000   /* lut registers */
 171                        0x14 0x00000000 0x0 0x20000>; /* configuration space */
 172                 reg-names = "dbi", "lut", "config";
 173                 #address-cells = <3>;
 174                 #size-cells = <2>;
 175                 device_type = "pci";
 176                 num-lanes = <8>;
 177                 bus-range = <0x0 0xff>;
 178                 ranges = <0x81000000 0x0 0x00000000 0x14 0x00020000 0x0 0x00010000   /* downstream I/O */
 179                           0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 180         };
 181
 182         pcie4: pcie@3700000 {
 183                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 184                 reg = <0x00 0x03700000 0x0 0x80000   /* dbi registers */
 185                        0x00 0x03780000 0x0 0x80000   /* lut registers */
 186                        0x16 0x00000000 0x0 0x20000>; /* configuration space */
 187                 reg-names = "dbi", "lut", "config";
 188                 #address-cells = <3>;
 189                 #size-cells = <2>;
 190                 device_type = "pci";
 191                 num-lanes = <4>;
 192                 bus-range = <0x0 0xff>;
 193                 ranges = <0x81000000 0x0 0x00000000 0x16 0x00020000 0x0 0x00010000   /* downstream I/O */
 194                           0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 195         };
 196
 197         sata: sata@3200000 {
 198                         compatible = "fsl,ls2080a-ahci";
 199                         reg = <0x0 0x3200000 0x0 0x10000>;
 200                         interrupts = <0 133 0x4>; /* Level high type */
 201                         status = "disabled";
 202         };
 203
 204         fsl_mc: fsl-mc@80c000000 {
 205                 compatible = "fsl,qoriq-mc", "simple-mfd";
 206                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
 207                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
 208                 #address-cells = <3>;
 209                 #size-cells = <1>;
 210
 211                 /*
 212                  * Region type 0x0 - MC portals
 213                  * Region type 0x1 - QBMAN portals
 214                  */
 215                 ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
 216                         0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
 217
 218                 dpmacs {
 219                         compatible = "simple-mfd";
 220                         #address-cells = <1>;
 221                         #size-cells = <0>;
 222
 223                         dpmac1: dpmac@1 {
 224                                 compatible = "fsl,qoriq-mc-dpmac";
 225                                 reg = <0x1>;
 226                                 status = "disabled";
 227                         };
 228
 229                         dpmac2: dpmac@2 {
 230                                 compatible = "fsl,qoriq-mc-dpmac";
 231                                 reg = <0x2>;
 232                                 status = "disabled";
 233                         };
 234
 235                         dpmac3: dpmac@3 {
 236                                 compatible = "fsl,qoriq-mc-dpmac";
 237                                 reg = <0x3>;
 238                                 status = "disabled";
 239                         };
 240
 241                         dpmac4: dpmac@4 {
 242                                 compatible = "fsl,qoriq-mc-dpmac";
 243                                 reg = <0x4>;
 244                                 status = "disabled";
 245                         };
 246
 247                         dpmac5: dpmac@5 {
 248                                 compatible = "fsl,qoriq-mc-dpmac";
 249                                 reg = <0x5>;
 250                                 status = "disabled";
 251                         };
 252
 253                         dpmac6: dpmac@6 {
 254                                 compatible = "fsl,qoriq-mc-dpmac";
 255                                 reg = <0x6>;
 256                                 status = "disabled";
 257                         };
 258
 259                         dpmac7: dpmac@7 {
 260                                 compatible = "fsl,qoriq-mc-dpmac";
 261                                 reg = <0x7>;
 262                                 status = "disabled";
 263                         };
 264
 265                         dpmac8: dpmac@8 {
 266                                 compatible = "fsl,qoriq-mc-dpmac";
 267                                 reg = <0x8>;
 268                                 status = "disabled";
 269                         };
 270                 };
 271         };
 272
 273         emdio1: mdio@8B96000 {
 274                 compatible = "fsl,ls-mdio";
 275                 reg = <0x0 0x8B96000 0x0 0x1000>;
 276                 #address-cells = <1>;
 277                 #size-cells = <0>;
 278                 status = "disabled";
 279         };
 280
 281         emdio2: mdio@8B97000 {
 282                 compatible = "fsl,ls-mdio";
 283                 reg = <0x0 0x8B97000 0x0 0x1000>;
 284                 #address-cells = <1>;
 285                 #size-cells = <0>;
 286                 status = "disabled";
 287         };
 288 };