arch/arm/dts/fsl-ls2080a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * Freescale ls2080a SOC common device tree source
   4  *
   5  * Copyright 2013-2015 Freescale Semiconductor, Inc.
   6  */
   7
   8 / {
   9         compatible = "fsl,ls2080a";
  10         interrupt-parent = <&gic>;
  11         #address-cells = <2>;
  12         #size-cells = <2>;
  13
  14         memory@80000000 {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x80000000 0 0x80000000>;
  17                       /* DRAM space - 1, size : 2 GB DRAM */
  18         };
  19
  20         gic: interrupt-controller@6000000 {
  21                 compatible = "arm,gic-v3";
  22                 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
  23                       <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
  24                 #interrupt-cells = <3>;
  25                 interrupt-controller;
  26                 interrupts = <1 9 0x4>;
  27         };
  28
  29         gic_lpi_base: syscon@0x80000000 {
  30                 compatible = "gic-lpi-base";
  31                 reg = <0x0 0x80000000 0x0 0x100000>;
  32                 max-gic-redistributors = <8>;
  33         };
  34
  35         timer {
  36                 compatible = "arm,armv8-timer";
  37                 interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
  38                              <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
  39                              <1 11 0x8>, /* Virtual PPI, active-low */
  40                              <1 10 0x8>; /* Hypervisor PPI, active-low */
  41         };
  42
  43         serial0: serial@21c0500 {
  44                 device_type = "serial";
  45                 compatible = "fsl,ns16550", "ns16550a";
  46                 reg = <0x0 0x21c0500 0x0 0x100>;
  47                 clock-frequency = <0>;  /* Updated by bootloader */
  48                 interrupts = <0 32 0x1>; /* edge triggered */
  49         };
  50
  51         serial1: serial@21c0600 {
  52                 device_type = "serial";
  53                 compatible = "fsl,ns16550", "ns16550a";
  54                 reg = <0x0 0x21c0600 0x0 0x100>;
  55                 clock-frequency = <0>;  /* Updated by bootloader */
  56                 interrupts = <0 32 0x1>; /* edge triggered */
  57         };
  58
  59         i2c0: i2c@2000000 {
  60                 status = "disabled";
  61                 compatible = "fsl,vf610-i2c";
  62                 #address-cells = <1>;
  63                 #size-cells = <0>;
  64                 reg = <0x0 0x2000000 0x0 0x10000>;
  65                 interrupts = <0 34 0x4>; /* Level high type */
  66         };
  67
  68         i2c1: i2c@2010000 {
  69                 status = "disabled";
  70                 compatible = "fsl,vf610-i2c";
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73                 reg = <0x0 0x2010000 0x0 0x10000>;
  74                 interrupts = <0 34 0x4>; /* Level high type */
  75         };
  76
  77         i2c2: i2c@2020000 {
  78                 status = "disabled";
  79                 compatible = "fsl,vf610-i2c";
  80                 #address-cells = <1>;
  81                 #size-cells = <0>;
  82                 reg = <0x0 0x2020000 0x0 0x10000>;
  83                 interrupts = <0 35 0x4>; /* Level high type */
  84         };
  85
  86         i2c3: i2c@2030000 {
  87                 status = "disabled";
  88                 compatible = "fsl,vf610-i2c";
  89                 #address-cells = <1>;
  90                 #size-cells = <0>;
  91                 reg = <0x0 0x2030000 0x0 0x10000>;
  92                 interrupts = <0 35 0x4>; /* Level high type */
  93         };
  94
  95         dspi: dspi@2100000 {
  96                 compatible = "fsl,vf610-dspi";
  97                 #address-cells = <1>;
  98                 #size-cells = <0>;
  99                 reg = <0x0 0x2100000 0x0 0x10000>;
 100                 interrupts = <0 26 0x4>; /* Level high type */
 101                 num-cs = <6>;
 102         };
 103
 104         qspi: quadspi@1550000 {
 105                 compatible = "fsl,ls2080a-qspi";
 106                 #address-cells = <1>;
 107                 #size-cells = <0>;
 108                 reg = <0x0 0x20c0000 0x0 0x10000>,
 109                         <0x0 0x20000000 0x0 0x10000000>;
 110                 reg-names = "QuadSPI", "QuadSPI-memory";
 111                 status = "disabled";
 112         };
 113
 114         esdhc: esdhc@0 {
 115                 compatible = "fsl,esdhc";
 116                 reg = <0x0 0x2140000 0x0 0x10000>;
 117                 interrupts = <0 28 0x4>; /* Level high type */
 118                 little-endian;
 119                 bus-width = <4>;
 120         };
 121
 122         usb0: usb3@3100000 {
 123                 compatible = "fsl,layerscape-dwc3";
 124                 reg = <0x0 0x3100000 0x0 0x10000>;
 125                 interrupts = <0 80 0x4>; /* Level high type */
 126                 dr_mode = "host";
 127         };
 128
 129         usb1: usb3@3110000 {
 130                 compatible = "fsl,layerscape-dwc3";
 131                 reg = <0x0 0x3110000 0x0 0x10000>;
 132                 interrupts = <0 81 0x4>; /* Level high type */
 133                 dr_mode = "host";
 134         };
 135
 136         pcie@3400000 {
 137                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 138                 reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
 139                        0x00 0x03480000 0x0 0x80000   /* lut registers */
 140                        0x10 0x00000000 0x0 0x20000>; /* configuration space */
 141                 reg-names = "dbi", "lut", "config";
 142                 #address-cells = <3>;
 143                 #size-cells = <2>;
 144                 device_type = "pci";
 145                 num-lanes = <4>;
 146                 bus-range = <0x0 0xff>;
 147                 ranges = <0x81000000 0x0 0x00000000 0x10 0x00020000 0x0 0x00010000   /* downstream I/O */
 148                           0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 149         };
 150
 151         pcie@3500000 {
 152                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 153                 reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
 154                        0x00 0x03580000 0x0 0x80000   /* lut registers */
 155                        0x12 0x00000000 0x0 0x20000>; /* configuration space */
 156                 reg-names = "dbi", "lut", "config";
 157                 #address-cells = <3>;
 158                 #size-cells = <2>;
 159                 device_type = "pci";
 160                 num-lanes = <4>;
 161                 bus-range = <0x0 0xff>;
 162                 ranges = <0x81000000 0x0 0x00000000 0x12 0x00020000 0x0 0x00010000   /* downstream I/O */
 163                           0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 164         };
 165
 166         pcie@3600000 {
 167                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 168                 reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
 169                        0x00 0x03680000 0x0 0x80000   /* lut registers */
 170                        0x14 0x00000000 0x0 0x20000>; /* configuration space */
 171                 reg-names = "dbi", "lut", "config";
 172                 #address-cells = <3>;
 173                 #size-cells = <2>;
 174                 device_type = "pci";
 175                 num-lanes = <8>;
 176                 bus-range = <0x0 0xff>;
 177                 ranges = <0x81000000 0x0 0x00000000 0x14 0x00020000 0x0 0x00010000   /* downstream I/O */
 178                           0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 179         };
 180
 181         pcie@3700000 {
 182                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 183                 reg = <0x00 0x03700000 0x0 0x80000   /* dbi registers */
 184                        0x00 0x03780000 0x0 0x80000   /* lut registers */
 185                        0x16 0x00000000 0x0 0x20000>; /* configuration space */
 186                 reg-names = "dbi", "lut", "config";
 187                 #address-cells = <3>;
 188                 #size-cells = <2>;
 189                 device_type = "pci";
 190                 num-lanes = <4>;
 191                 bus-range = <0x0 0xff>;
 192                 ranges = <0x81000000 0x0 0x00000000 0x16 0x00020000 0x0 0x00010000   /* downstream I/O */
 193                           0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 194         };
 195
 196         sata: sata@3200000 {
 197                         compatible = "fsl,ls2080a-ahci";
 198                         reg = <0x0 0x3200000 0x0 0x10000>;
 199                         interrupts = <0 133 0x4>; /* Level high type */
 200                         status = "disabled";
 201         };
 202
 203         fsl_mc: fsl-mc@80c000000 {
 204                 compatible = "fsl,qoriq-mc", "simple-mfd";
 205                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
 206                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
 207                 #address-cells = <3>;
 208                 #size-cells = <1>;
 209
 210                 /*
 211                  * Region type 0x0 - MC portals
 212                  * Region type 0x1 - QBMAN portals
 213                  */
 214                 ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
 215                         0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
 216
 217                 dpmacs {
 218                         compatible = "simple-mfd";
 219                         #address-cells = <1>;
 220                         #size-cells = <0>;
 221
 222                         dpmac1: dpmac@1 {
 223                                 compatible = "fsl,qoriq-mc-dpmac";
 224                                 reg = <0x1>;
 225                                 status = "disabled";
 226                         };
 227
 228                         dpmac2: dpmac@2 {
 229                                 compatible = "fsl,qoriq-mc-dpmac";
 230                                 reg = <0x2>;
 231                                 status = "disabled";
 232                         };
 233
 234                         dpmac3: dpmac@3 {
 235                                 compatible = "fsl,qoriq-mc-dpmac";
 236                                 reg = <0x3>;
 237                                 status = "disabled";
 238                         };
 239
 240                         dpmac4: dpmac@4 {
 241                                 compatible = "fsl,qoriq-mc-dpmac";
 242                                 reg = <0x4>;
 243                                 status = "disabled";
 244                         };
 245
 246                         dpmac5: dpmac@5 {
 247                                 compatible = "fsl,qoriq-mc-dpmac";
 248                                 reg = <0x5>;
 249                                 status = "disabled";
 250                         };
 251
 252                         dpmac6: dpmac@6 {
 253                                 compatible = "fsl,qoriq-mc-dpmac";
 254                                 reg = <0x6>;
 255                                 status = "disabled";
 256                         };
 257
 258                         dpmac7: dpmac@7 {
 259                                 compatible = "fsl,qoriq-mc-dpmac";
 260                                 reg = <0x7>;
 261                                 status = "disabled";
 262                         };
 263
 264                         dpmac8: dpmac@8 {
 265                                 compatible = "fsl,qoriq-mc-dpmac";
 266                                 reg = <0x8>;
 267                                 status = "disabled";
 268                         };
 269                 };
 270         };
 271
 272         emdio1: mdio@8B96000 {
 273                 compatible = "fsl,ls-mdio";
 274                 reg = <0x0 0x8B96000 0x0 0x1000>;
 275                 #address-cells = <1>;
 276                 #size-cells = <0>;
 277                 status = "disabled";
 278         };
 279
 280         emdio2: mdio@8B97000 {
 281                 compatible = "fsl,ls-mdio";
 282                 reg = <0x0 0x8B97000 0x0 0x1000>;
 283                 #address-cells = <1>;
 284                 #size-cells = <0>;
 285                 status = "disabled";
 286         };
 287 };