arch/arm/dts/fsl-ls1088a.dtsi

   1 // SPDX-License-Identifier: GPL-2.0+ OR X11
   2 /*
   3  * NXP ls1088a SOC common device tree source
   4  *
   5  * Copyright 2017 NXP
   6  */
   7
   8 / {
   9         compatible = "fsl,ls1088a";
  10         interrupt-parent = <&gic>;
  11         #address-cells = <2>;
  12         #size-cells = <2>;
  13
  14         memory@80000000 {
  15                 device_type = "memory";
  16                 reg = <0x00000000 0x80000000 0 0x80000000>;
  17                       /* DRAM space - 1, size : 2 GB DRAM */
  18         };
  19
  20         gic: interrupt-controller@6000000 {
  21                 compatible = "arm,gic-v3";
  22                 reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
  23                       <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
  24                 #interrupt-cells = <3>;
  25                 interrupt-controller;
  26                 interrupts = <1 9 0x4>;
  27         };
  28
  29         timer {
  30                 compatible = "arm,armv8-timer";
  31                 interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
  32                              <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
  33                              <1 11 0x8>, /* Virtual PPI, active-low */
  34                              <1 10 0x8>; /* Hypervisor PPI, active-low */
  35         };
  36
  37         serial0: serial@21c0500 {
  38                 device_type = "serial";
  39                 compatible = "fsl,ns16550", "ns16550a";
  40                 reg = <0x0 0x21c0500 0x0 0x100>;
  41                 clock-frequency = <0>;  /* Updated by bootloader */
  42                 interrupts = <0 32 0x1>; /* edge triggered */
  43         };
  44
  45         serial1: serial@21c0600 {
  46                 device_type = "serial";
  47                 compatible = "fsl,ns16550", "ns16550a";
  48                 reg = <0x0 0x21c0600 0x0 0x100>;
  49                 clock-frequency = <0>;  /* Updated by bootloader */
  50                 interrupts = <0 32 0x1>; /* edge triggered */
  51         };
  52
  53         fsl_mc: fsl-mc@80c000000 {
  54                 compatible = "fsl,qoriq-mc";
  55                 reg = <0x00000008 0x0c000000 0 0x40>,    /* MC portal base */
  56                       <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
  57         };
  58
  59         dspi: dspi@2100000 {
  60                 compatible = "fsl,vf610-dspi";
  61                 #address-cells = <1>;
  62                 #size-cells = <0>;
  63                 reg = <0x0 0x2100000 0x0 0x10000>;
  64                 interrupts = <0 26 0x4>; /* Level high type */
  65                 num-cs = <6>;
  66         };
  67
  68         qspi: quadspi@1550000 {
  69                 compatible = "fsl,vf610-qspi";
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72                 reg = <0x0 0x20c0000 0x0 0x10000>,
  73                         <0x0 0x20000000 0x0 0x10000000>;
  74                 reg-names = "QuadSPI", "QuadSPI-memory";
  75                 num-cs = <4>;
  76         };
  77
  78         esdhc: esdhc@2140000 {
  79                 compatible = "fsl,esdhc";
  80                 reg = <0x0 0x2140000 0x0 0x10000>;
  81                 interrupts = <0 28 0x4>; /* Level high type */
  82                 little-endian;
  83                 bus-width = <4>;
  84         };
  85
  86         ifc: ifc@1530000 {
  87                 compatible = "fsl,ifc", "simple-bus";
  88                 reg = <0x0 0x2240000 0x0 0x20000>;
  89                 interrupts = <0 21 0x4>; /* Level high type */
  90         };
  91
  92         usb0: usb3@3100000 {
  93                 compatible = "fsl,layerscape-dwc3";
  94                 reg = <0x0 0x3100000 0x0 0x10000>;
  95                 interrupts = <0 80 0x4>; /* Level high type */
  96                 dr_mode = "host";
  97         };
  98
  99         usb1: usb3@3110000 {
 100                 compatible = "fsl,layerscape-dwc3";
 101                 reg = <0x0 0x3110000 0x0 0x10000>;
 102                 interrupts = <0 81 0x4>; /* Level high type */
 103                 dr_mode = "host";
 104         };
 105
 106         pcie@3400000 {
 107                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 108                 reg = <0x00 0x03400000 0x0 0x80000   /* dbi registers */
 109                        0x00 0x03480000 0x0 0x80000   /* lut registers */
 110                        0x00 0x034c0000 0x0 0x40000   /* pf controls registers */
 111                        0x20 0x00000000 0x0 0x20000>; /* configuration space */
 112                 reg-names = "dbi", "lut", "ctrl", "config";
 113                 #address-cells = <3>;
 114                 #size-cells = <2>;
 115                 device_type = "pci";
 116                 num-lanes = <4>;
 117                 bus-range = <0x0 0xff>;
 118                 ranges = <0x81000000 0x0 0x00000000 0x20 0x00020000 0x0 0x00010000   /* downstream I/O */
 119                           0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 120         };
 121
 122         pcie@3500000 {
 123                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 124                 reg = <0x00 0x03500000 0x0 0x80000   /* dbi registers */
 125                        0x00 0x03580000 0x0 0x80000   /* lut registers */
 126                        0x00 0x035c0000 0x0 0x40000   /* pf controls registers */
 127                        0x28 0x00000000 0x0 0x20000>; /* configuration space */
 128                 reg-names = "dbi", "lut", "ctrl", "config";
 129                 #address-cells = <3>;
 130                 #size-cells = <2>;
 131                 device_type = "pci";
 132                 num-lanes = <4>;
 133                 bus-range = <0x0 0xff>;
 134                 ranges = <0x81000000 0x0 0x00000000 0x28 0x00020000 0x0 0x00010000   /* downstream I/O */
 135                           0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 136         };
 137
 138         pcie@3600000 {
 139                 compatible = "fsl,ls-pcie", "snps,dw-pcie";
 140                 reg = <0x00 0x03600000 0x0 0x80000   /* dbi registers */
 141                        0x00 0x03680000 0x0 0x80000   /* lut registers */
 142                        0x00 0x036c0000 0x0 0x40000   /* pf controls registers */
 143                        0x30 0x00000000 0x0 0x20000>; /* configuration space */
 144                 reg-names = "dbi", "lut", "ctrl", "config";
 145                 #address-cells = <3>;
 146                 #size-cells = <2>;
 147                 device_type = "pci";
 148                 num-lanes = <8>;
 149                 bus-range = <0x0 0xff>;
 150                 ranges = <0x81000000 0x0 0x00000000 0x30 0x00020000 0x0 0x00010000   /* downstream I/O */
 151                           0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 152         };
 153
 154         sata: sata@3200000 {
 155                 compatible = "fsl,ls1088a-ahci";
 156                 reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
 157                        0x7 0x100520  0x0 0x4>;   /* ecc sata addr*/
 158                 reg-names = "sata-base", "ecc-addr";
 159                 interrupts = <0 133 4>;
 160                 status = "disabled";
 161         };
 162
 163 };