arch/arm/dts/exynos5250-spring.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Google Spring board device tree source
   4  *
   5  * Copyright (c) 2013 Google, Inc
   6  * Copyright (c) 2014 SUSE LINUX Products GmbH
   7  */
   8
   9 /dts-v1/;
  10 #include <dt-bindings/gpio/gpio.h>
  11 #include <dt-bindings/interrupt-controller/irq.h>
  12 #include <dt-bindings/input/input.h>
  13 #include "exynos5250.dtsi"
  14
  15 / {
  16         model = "Google Spring";
  17         compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
  18
  19         aliases {
  20                 i2c0 = "/i2c@12C60000";
  21                 i2c1 = "/i2c@12C70000";
  22                 i2c2 = "/i2c@12C80000";
  23                 i2c3 = "/i2c@12C90000";
  24                 i2c4 = "/i2c@12CA0000";
  25                 i2c5 = "/i2c@12CB0000";
  26                 i2c6 = "/i2c@12CC0000";
  27                 i2c7 = "/i2c@12CD0000";
  28                 i2c104 = &cros_ec_ldo_tunnel;
  29                 spi0 = "/spi@12d20000";
  30                 spi1 = "/spi@12d30000";
  31                 spi2 = "/spi@12d40000";
  32                 spi3 = "/spi@131a0000";
  33                 spi4 = "/spi@131b0000";
  34                 mmc0 = "/mmc@12200000";
  35                 serial0 = "/serial@12C30000";
  36                 console = "/serial@12C30000";
  37         };
  38
  39         memory {
  40                 reg = <0x40000000 0x80000000>;
  41         };
  42
  43         flash@0 {
  44                 spl { /* spl size override */
  45                         size = <0x8000>;
  46                 };
  47         };
  48
  49         chosen {
  50                 bootargs = "console=tty1";
  51                 stdout-path = "serial3:115200n8";
  52         };
  53
  54         board-rev {
  55                 compatible = "google,board-revision";
  56                 google,board-rev-gpios = <&gpy4 0 0>, <&gpy4 1 0>,
  57                                          <&gpy4 2 0>;
  58         };
  59
  60         i2c@12C90000 {
  61                 clock-frequency = <100000>;
  62                 tpm@20 {
  63                         reg = <0x20>;
  64                         compatible = "infineon,slb9645tt";
  65                 };
  66         };
  67
  68         mmc@12200000 {
  69                 samsung,bus-width = <8>;
  70                 samsung,timing = <1 3 3>;
  71                 samsung,removable = <0>;
  72         };
  73
  74         mmc@12210000 {
  75                 status = "disabled";
  76         };
  77
  78         mmc@12220000 {
  79                 /* MMC2 pins are used as GPIO for eDP bridge */
  80                 status = "disabled";
  81         };
  82
  83         mmc@12230000 {
  84                 status = "disabled";
  85         };
  86
  87         ehci@12110000 {
  88                 samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
  89                 status = "okay";
  90         };
  91
  92         xhci@12000000 {
  93                 samsung,vbus-gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
  94         };
  95
  96         spi@12d30000 {
  97                 spi-max-frequency = <50000000>;
  98                 firmware_storage_spi: flash@0 {
  99                         compatible = "spi-flash";
 100                         reg = <0>;
 101                 };
 102         };
 103
 104         tmu@10060000 {
 105                 samsung,min-temp        = <25>;
 106                 samsung,max-temp        = <125>;
 107                 samsung,start-warning   = <95>;
 108                 samsung,start-tripping  = <105>;
 109                 samsung,hw-tripping     = <110>;
 110                 samsung,efuse-min-value = <40>;
 111                 samsung,efuse-value     = <55>;
 112                 samsung,efuse-max-value = <100>;
 113                 samsung,slope           = <274761730>;
 114                 samsung,dc-value        = <25>;
 115         };
 116
 117         fimd@14400000 {
 118                 samsung,vl-freq = <60>;
 119                 samsung,vl-col = <1366>;
 120                 samsung,vl-row = <768>;
 121                 samsung,vl-width = <1366>;
 122                 samsung,vl-height = <768>;
 123
 124                 samsung,vl-clkp;
 125                 samsung,vl-dp;
 126                 samsung,vl-hsp;
 127                 samsung,vl-vsp;
 128
 129                 samsung,vl-bpix = <4>;
 130
 131                 samsung,vl-hspw = <32>;
 132                 samsung,vl-hbpd = <80>;
 133                 samsung,vl-hfpd = <48>;
 134                 samsung,vl-vspw = <5>;
 135                 samsung,vl-vbpd = <14>;
 136                 samsung,vl-vfpd = <3>;
 137                 samsung,vl-cmd-allow-len = <0xf>;
 138
 139                 samsung,winid = <0>;
 140                 samsung,interface-mode = <1>;
 141                 samsung,dp-enabled = <1>;
 142                 samsung,dual-lcd-enabled = <0>;
 143         };
 144
 145         dp@145b0000 {
 146                 samsung,lt-status = <0>;
 147
 148                 samsung,master-mode = <0>;
 149                 samsung,bist-mode = <0>;
 150                 samsung,bist-pattern = <0>;
 151                 samsung,h-sync-polarity = <0>;
 152                 samsung,v-sync-polarity = <0>;
 153                 samsung,interlaced = <0>;
 154                 samsung,color-space = <0>;
 155                 samsung,dynamic-range = <0>;
 156                 samsung,ycbcr-coeff = <0>;
 157                 samsung,color-depth = <1>;
 158         };
 159
 160         backlight: backlight {
 161                 compatible = "pwm-backlight";
 162                 pwms = <&pwm 0 1000000 0>;
 163                 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 164                 default-brightness-level = <1>;
 165                 enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>;
 166                 power-supply = <&fet1>;
 167         };
 168
 169         panel: panel {
 170                 compatible = "auo,b116xw03";
 171                 power-supply = <&fet6>;
 172                 backlight = <&backlight>;
 173
 174                 port {
 175                         panel_in: endpoint {
 176                                 remote-endpoint = <&bridge_out>;
 177                         };
 178                 };
 179         };
 180 };
 181
 182 &i2c_0 {
 183         status = "okay";
 184         samsung,i2c-sda-delay = <100>;
 185         samsung,i2c-max-bus-freq = <378000>;
 186
 187         s5m8767-pmic@66 {
 188                 compatible = "samsung,s5m8767-pmic";
 189                 reg = <0x66>;
 190                 interrupt-parent = <&gpx3>;
 191                 wakeup-source;
 192
 193                 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
 194                                               <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
 195                                               <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
 196
 197                 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
 198                                              <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
 199                                              <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
 200
 201                 /*
 202                  * The following arrays of DVS voltages are not used, since we are
 203                  * not using GPIOs to control PMIC bucks, but they must be defined
 204                  * to please the driver.
 205                  */
 206                 s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
 207                                                  <1250000>, <1200000>,
 208                                                  <1150000>, <1100000>,
 209                                                  <1000000>, <950000>;
 210
 211                 s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
 212                                                  <1100000>, <1100000>,
 213                                                  <1000000>, <1000000>,
 214                                                  <1000000>, <1000000>;
 215
 216                 s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
 217                                                  <1200000>, <1200000>,
 218                                                  <1200000>, <1200000>,
 219                                                  <1200000>, <1200000>;
 220
 221                 clocks {
 222                         compatible = "samsung,s5m8767-clk";
 223                         #clock-cells = <1>;
 224                         clock-output-names = "en32khz_ap",
 225                                              "en32khz_cp",
 226                                              "en32khz_bt";
 227                 };
 228
 229                 regulators {
 230                         ldo4_reg: LDO4 {
 231                                 regulator-name = "P1.0V_LDO_OUT4";
 232                                 regulator-min-microvolt = <1000000>;
 233                                 regulator-max-microvolt = <1000000>;
 234                                 regulator-always-on;
 235                                 op_mode = <0>;
 236                         };
 237
 238                         ldo5_reg: LDO5 {
 239                                 regulator-name = "P1.8V_LDO_OUT5";
 240                                 regulator-min-microvolt = <1800000>;
 241                                 regulator-max-microvolt = <1800000>;
 242                                 regulator-always-on;
 243                                 op_mode = <0>;
 244                         };
 245
 246                         ldo6_reg: LDO6 {
 247                                 regulator-name = "vdd_mydp";
 248                                 regulator-min-microvolt = <1200000>;
 249                                 regulator-max-microvolt = <1200000>;
 250                                 regulator-always-on;
 251                                 op_mode = <3>;
 252                         };
 253
 254                         ldo7_reg: LDO7 {
 255                                 regulator-name = "P1.1V_LDO_OUT7";
 256                                 regulator-min-microvolt = <1100000>;
 257                                 regulator-max-microvolt = <1100000>;
 258                                 regulator-always-on;
 259                                 op_mode = <3>;
 260                         };
 261
 262                         ldo8_reg: LDO8 {
 263                                 regulator-name = "P1.0V_LDO_OUT8";
 264                                 regulator-min-microvolt = <1000000>;
 265                                 regulator-max-microvolt = <1000000>;
 266                                 regulator-always-on;
 267                                 op_mode = <3>;
 268                         };
 269
 270                         ldo10_reg: LDO10 {
 271                                 regulator-name = "P1.8V_LDO_OUT10";
 272                                 regulator-min-microvolt = <1800000>;
 273                                 regulator-max-microvolt = <1800000>;
 274                                 regulator-always-on;
 275                                 op_mode = <3>;
 276                         };
 277
 278                         ldo11_reg: LDO11 {
 279                                 regulator-name = "P1.8V_LDO_OUT11";
 280                                 regulator-min-microvolt = <1800000>;
 281                                 regulator-max-microvolt = <1800000>;
 282                                 regulator-always-on;
 283                                 op_mode = <0>;
 284                         };
 285
 286                         ldo12_reg: LDO12 {
 287                                 regulator-name = "P3.0V_LDO_OUT12";
 288                                 regulator-min-microvolt = <3000000>;
 289                                 regulator-max-microvolt = <3000000>;
 290                                 regulator-always-on;
 291                                 op_mode = <3>;
 292                         };
 293
 294                         ldo13_reg: LDO13 {
 295                                 regulator-name = "P1.8V_LDO_OUT13";
 296                                 regulator-min-microvolt = <1800000>;
 297                                 regulator-max-microvolt = <1800000>;
 298                                 regulator-always-on;
 299                                 op_mode = <0>;
 300                         };
 301
 302                         ldo14_reg: LDO14 {
 303                                 regulator-name = "P1.8V_LDO_OUT14";
 304                                 regulator-min-microvolt = <1800000>;
 305                                 regulator-max-microvolt = <1800000>;
 306                                 regulator-always-on;
 307                                 op_mode = <3>;
 308                         };
 309
 310                         ldo15_reg: LDO15 {
 311                                 regulator-name = "P1.0V_LDO_OUT15";
 312                                 regulator-min-microvolt = <1000000>;
 313                                 regulator-max-microvolt = <1000000>;
 314                                 regulator-always-on;
 315                                 op_mode = <3>;
 316                         };
 317
 318                         ldo16_reg: LDO16 {
 319                                 regulator-name = "P1.8V_LDO_OUT16";
 320                                 regulator-min-microvolt = <1800000>;
 321                                 regulator-max-microvolt = <1800000>;
 322                                 regulator-always-on;
 323                                 op_mode = <3>;
 324                         };
 325
 326                         ldo17_reg: LDO17 {
 327                                 regulator-name = "P1.2V_LDO_OUT17";
 328                                 regulator-min-microvolt = <1200000>;
 329                                 regulator-max-microvolt = <1200000>;
 330                                 regulator-always-on;
 331                                 op_mode = <0>;
 332                         };
 333
 334                         ldo25_reg: LDO25 {
 335                                 regulator-name = "vdd_bridge";
 336                                 regulator-min-microvolt = <1200000>;
 337                                 regulator-max-microvolt = <1200000>;
 338                                 regulator-always-on;
 339                                 op_mode = <1>;
 340                         };
 341
 342                         buck1_reg: BUCK1 {
 343                                 regulator-name = "vdd_mif";
 344                                 regulator-min-microvolt = <950000>;
 345                                 regulator-max-microvolt = <1300000>;
 346                                 regulator-always-on;
 347                                 regulator-boot-on;
 348                                 op_mode = <3>;
 349                         };
 350
 351                         buck2_reg: BUCK2 {
 352                                 regulator-name = "vdd_arm";
 353                                 regulator-min-microvolt = <850000>;
 354                                 regulator-max-microvolt = <1350000>;
 355                                 regulator-always-on;
 356                                 regulator-boot-on;
 357                                 op_mode = <3>;
 358                         };
 359
 360                         buck3_reg: BUCK3 {
 361                                 regulator-name = "vdd_int";
 362                                 regulator-min-microvolt = <900000>;
 363                                 regulator-max-microvolt = <1200000>;
 364                                 regulator-always-on;
 365                                 regulator-boot-on;
 366                                 op_mode = <3>;
 367                         };
 368
 369                         buck4_reg: BUCK4 {
 370                                 regulator-name = "vdd_g3d";
 371                                 regulator-min-microvolt = <850000>;
 372                                 regulator-max-microvolt = <1300000>;
 373                                 regulator-boot-on;
 374                                 op_mode = <3>;
 375                         };
 376
 377                         buck5_reg: BUCK5 {
 378                                 regulator-name = "P1.8V_BUCK_OUT5";
 379                                 regulator-min-microvolt = <1800000>;
 380                                 regulator-max-microvolt = <1800000>;
 381                                 regulator-always-on;
 382                                 regulator-boot-on;
 383                                 op_mode = <1>;
 384                         };
 385
 386                         buck6_reg: BUCK6 {
 387                                 regulator-name = "P1.2V_BUCK_OUT6";
 388                                 regulator-min-microvolt = <2050000>;
 389                                 regulator-max-microvolt = <2050000>;
 390                                 regulator-always-on;
 391                                 regulator-boot-on;
 392                                 op_mode = <0>;
 393                         };
 394
 395                         buck9_reg: BUCK9 {
 396                                 regulator-name = "vdd_ummc";
 397                                 regulator-min-microvolt = <950000>;
 398                                 regulator-max-microvolt = <3000000>;
 399                                 regulator-always-on;
 400                                 regulator-boot-on;
 401                                 op_mode = <3>;
 402                         };
 403                 };
 404         };
 405 };
 406
 407 &dp {
 408         status = "okay";
 409         samsung,color-space = <0>;
 410         samsung,dynamic-range = <0>;
 411         samsung,ycbcr-coeff = <0>;
 412         samsung,color-depth = <1>;
 413         samsung,link-rate = <0x0a>;
 414         samsung,lane-count = <1>;
 415         samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 416
 417         ports {
 418                 port@0 {
 419                         dp_out: endpoint {
 420                                 remote-endpoint = <&bridge_in>;
 421                         };
 422                 };
 423         };
 424 };
 425
 426 &i2c_1 {
 427         status = "okay";
 428         samsung,i2c-sda-delay = <100>;
 429         samsung,i2c-max-bus-freq = <378000>;
 430 };
 431
 432 &i2c_2 {
 433         status = "okay";
 434         samsung,i2c-sda-delay = <100>;
 435         samsung,i2c-max-bus-freq = <66000>;
 436 };
 437
 438 &i2c_3 {
 439         status = "okay";
 440         samsung,i2c-sda-delay = <100>;
 441         samsung,i2c-max-bus-freq = <66000>;
 442 };
 443
 444 &i2c_4 {
 445         status = "okay";
 446         samsung,i2c-sda-delay = <100>;
 447         samsung,i2c-max-bus-freq = <66000>;
 448         clock-frequency = <66000>;
 449
 450         cros_ec: embedded-controller {
 451                 compatible = "google,cros-ec-i2c";
 452                 reg = <0x1e>;
 453                 interrupts = <6 IRQ_TYPE_NONE>;
 454                 interrupt-parent = <&gpx1>;
 455                 wakeup-source;
 456                 u-boot,i2c-offset-len = <0>;
 457                 ec-interrupt = <&gpx1 6 GPIO_ACTIVE_LOW>;
 458                 cros_ec_ldo_tunnel: cros-ec-ldo-tunnel {
 459                         compatible = "google,cros-ec-ldo-tunnel";
 460                         #address-cells = <1>;
 461                         #size-cells = <0>;
 462                         power-regulator {
 463                                 compatible = "ti,tps65090";
 464                                 reg = <0x48>;
 465
 466                                 regulators {
 467                                         dcdc1 {
 468                                                 ti,enable-ext-control;
 469                                         };
 470                                         dcdc2 {
 471                                                 ti,enable-ext-control;
 472                                         };
 473                                         dcdc3 {
 474                                                 ti,enable-ext-control;
 475                                         };
 476                                         fet1: fet1 {
 477                                                 regulator-name = "vcd_led";
 478                                                 ti,overcurrent-wait = <3>;
 479                                         };
 480                                         tps65090_fet2: fet2 {
 481                                                 regulator-name = "video_mid";
 482                                                 regulator-always-on;
 483                                                 ti,overcurrent-wait = <3>;
 484                                         };
 485                                         fet3 {
 486                                                 regulator-name = "wwan_r";
 487                                                 regulator-always-on;
 488                                                 ti,overcurrent-wait = <3>;
 489                                         };
 490                                         fet4 {
 491                                                 regulator-name = "sdcard";
 492                                                 ti,overcurrent-wait = <3>;
 493                                         };
 494                                         fet5 {
 495                                                 regulator-name = "camout";
 496                                                 regulator-always-on;
 497                                                 ti,overcurrent-wait = <3>;
 498                                         };
 499                                         fet6: fet6 {
 500                                                 regulator-name = "lcd_vdd";
 501                                                 ti,overcurrent-wait = <3>;
 502                                         };
 503                                         tps65090_fet7: fet7 {
 504                                                 regulator-name = "video_mid_1a";
 505                                                 regulator-always-on;
 506                                                 ti,overcurrent-wait = <3>;
 507                                         };
 508                                         ldo1 {
 509                                         };
 510                                         ldo2 {
 511                                         };
 512                                 };
 513                         };
 514                 };
 515         };
 516 };
 517
 518 &i2c_5 {
 519         status = "okay";
 520         samsung,i2c-sda-delay = <100>;
 521         samsung,i2c-max-bus-freq = <66000>;
 522 };
 523
 524 &i2c_7 {
 525         status = "okay";
 526         samsung,i2c-sda-delay = <100>;
 527         samsung,i2c-max-bus-freq = <66000>;
 528
 529         ps8622-bridge@8 {
 530                 compatible = "parade,ps8622";
 531                 reg = <0x8>;
 532                 sleep-gpios = <&gpc3 6 GPIO_ACTIVE_LOW>;
 533                 reset-gpios = <&gpc3 1 GPIO_ACTIVE_LOW>;
 534                 hotplug-gpios = <&gpc3 0 GPIO_ACTIVE_HIGH>;
 535                 power-supply = <&ldo6_reg>;
 536                 parade,regs = /bits/ 8 <
 537                         0x02 0xa1 0x01 /* HPD low */
 538                         /*
 539                          * SW setting: [1:0] SW output 1.2V voltage is
 540                          * lower to 96%
 541                          */
 542                         0x04 0x14 0x01
 543                         /* RCO SS setting: [5:4] = b01 0.5%, b10 1%, b11 1.5% */
 544                         0x04 0xe3 0x20
 545                         0x04 0xe2 0x80 /* [7] RCO SS enable */
 546                         /*
 547                          * RPHY Setting: [3:2] CDR tune wait cycle before
 548                          * measure for fine tune b00: 1us,
 549                          * 01: 0.5us, 10:2us, 11:4us
 550                          */
 551                         0x04 0x8a 0x0c
 552                         0x04 0x89 0x08 /* [3] RFD always on */
 553                         /*
 554                          * CTN lock in/out: 20000ppm/80000ppm. Lock out 2 times
 555                          */
 556                         0x04 0x71 0x2d
 557                         /* 2.7G CDR settings */
 558                         0x04 0x7d 0x07 /* NOF=40LSB for HBR CDR setting */
 559                         0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
 560                         0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
 561                         /*
 562                          * 1.62G CDR settings:
 563                          * [5:2]NOF=64LSB [1:0]DCO scale is 2/5
 564                          */
 565                         0x04 0xc0 0x12
 566                         0x04 0xc1 0x92 /* Gitune=-37% */
 567                         0x04 0xc2 0x1c /* Fbstep=100% */
 568                         0x04 0x32 0x80 /* [7] LOS signal disable */
 569                         /* RPIO Setting */
 570                         /* [7:4] LVDS driver bias current 75% (250mV swing) */
 571                         0x04 0x00 0xb0
 572                          /* [7:6] Right-bar GPIO output strength is 8mA */
 573                         0x04 0x15 0x40
 574                         /* EQ Training State Machine Setting */
 575                         0x04 0x54 0x10 /* RCO calibration start */
 576                         /* [4:0] MAX_LANE_COUNT set to one lane */
 577                         0x01 0x02 0x81
 578                         /* [4:0] LANE_COUNT_SET set to one lane */
 579                         0x01 0x21 0x81
 580                         0x00 0x52 0x20
 581                         0x00 0xf1 0x03 /* HPD CP toggle enable */
 582                         0x00 0x62 0x41
 583                         /* Counter number add 1ms counter delay */
 584                         0x00 0xf6 0x01
 585                         /*
 586                          * [6]PWM function control by DPCD0040f[7], default
 587                          * is PWM block always works
 588                          */
 589                         0x00 0x77 0x06
 590                         0x00 0x4c 0x04
 591                         /*
 592                          * 04h Adjust VTotal tolerance to fix the 30Hz no-
 593                          * display issue
 594                          * DPCD00400='h00 Parade OUI = 'h001cf8
 595                          */
 596                         0x01 0xc0 0x00
 597                         0x01 0xc1 0x1c /* DPCD00401='h1c */
 598                         0x01 0xc2 0xf8 /* DPCD00402='hf8 */
 599                         /* DPCD403~408 = ASCII code D2SLV5='h4432534c5635 */
 600                         0x01 0xc3 0x44
 601                         0x01 0xc4 0x32 /* DPCD404 */
 602                         0x01 0xc5 0x53 /* DPCD405 */
 603                         0x01 0xc6 0x4c /* DPCD406 */
 604                         0x01 0xc7 0x56 /* DPCD407 */
 605                         0x01 0xc8 0x35 /* DPCD408 */
 606                         /* DPCD40A Initial Code major revision '01' */
 607                         0x01 0xca 0x01
 608                         /* DPCD40B Initial Code minor revision '05' */
 609                         0x01 0xcb 0x05
 610                         0x01 0xa5 0xa0 /* DPCD720, Select internal PWM */
 611                         /*
 612                          * 0xff for 100% PWM of brightness, 0h for 0% brightness
 613                          */
 614                         0x01 0xa7 0x00
 615                         /*
 616                          * Set LVDS output as 6bit-VESA mapping, single LVDS
 617                          * channel
 618                          */
 619                         0x01 0xcc 0x13
 620                         0x02 0xb1 0x20 /* Enable SSC set by register */
 621                         /* Set SSC enabled and +/-1% central spreading */
 622                         0x04 0x10 0x16
 623                         0x04 0x59 0x60 /* MPU Clock source: LC => RCO */
 624                         0x04 0x54 0x14 /* LC -> RCO */
 625                         0x02 0xa1 0x91>; /* HPD high */
 626                 ports {
 627                         port@0 {
 628                                 bridge_out: endpoint {
 629                                         remote-endpoint = <&panel_in>;
 630                                 };
 631                         };
 632
 633                         port@1 {
 634                                 bridge_in: endpoint {
 635                                         remote-endpoint = <&dp_out>;
 636                                 };
 637                         };
 638                 };
 639         };
 640
 641         max98095: soundcodec@10 {
 642                 reg = <0x10>;
 643                 compatible = "maxim,max98095";
 644                 #sound-dai-cells = <1>;
 645         };
 646
 647         sound {
 648                 compatible = "google,spring-audio-max98095";
 649
 650                 samsung,model = "Spring-I2S-MAX98095";
 651                 samsung,audio-codec = <&max98095>;
 652
 653                 cpu {
 654                         sound-dai = <&i2s0 0>;
 655                 };
 656
 657                 codec {
 658                         sound-dai = <&max98095 0>;
 659                 };
 660         };
 661
 662 };
 663
 664 #include "cros-ec-keyboard.dtsi"