2 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
4 * Copyright (C) 2015 Atmel,
5 * 2015 Josh Wu <josh.wu@atmel.com>
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of the
15 * License, or (at your option) any later version.
17 * This file is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
24 * b) Permission is hereby granted, free of charge, to any person
25 * obtaining a copy of this software and associated documentation
26 * files (the "Software"), to deal in the Software without
27 * restriction, including without limitation the rights to use,
28 * copy, modify, merge, publish, distribute, sublicense, and/or
29 * sell copies of the Software, and to permit persons to whom the
30 * Software is furnished to do so, subject to the following
33 * The above copyright notice and this permission notice shall be
34 * included in all copies or substantial portions of the Software.
36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 * OTHER DEALINGS IN THE SOFTWARE.
46 #include "sama5d4.dtsi"
49 model = "Atmel SAMA5D4 Xplained";
50 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
58 stdout-path = &usart3;
62 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
63 pinctrl-names = "default";
64 pinctrl-0 = <&pinctrl_onewire_tm_default>;
67 w1_eeprom: w1_eeprom@0 {
68 compatible = "maxim,ds24b33";
74 reg = <0x20000000 0x20000000>;
79 clock-frequency = <32768>;
83 clock-frequency = <12000000>;
89 hlcdc: hlcdc@f0000000 {
91 atmel,guard-time = <1>;
92 pinctrl-names = "default";
93 pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb888>;
100 clock-frequency = <9000000>;
116 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
120 compatible = "spi-flash";
121 spi-max-frequency = <50000000>;
129 i2c_eeprom: i2c_eeprom@5c {
130 compatible = "atmel,24mac402";
135 macb0: ethernet@f8020000 {
138 pinctrl-names = "default";
139 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
141 phy0: ethernet-phy@1 {
142 interrupt-parent = <&pioE>;
143 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
150 pinctrl-names = "default";
151 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
152 vmmc-supply = <&vcc_mmc1_reg>;
153 vqmmc-supply = <&vcc_3v3_reg>;
158 cd-gpios = <&pioE 3 0>;
162 usart3: serial@fc00c000 {
167 usart4: serial@fc010000 {
172 cs-gpios = <&pioB 21 0>;
177 pinctrl-names = "default";
179 /* external trigger conflicts with USBA_VBUS */
186 atmel,adc-vref = <3300>;
197 pinctrl_mmc1_cd: mmc1_cd {
200 <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
202 pinctrl_usba_vbus: usba_vbus {
204 <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
206 pinctrl_key_gpio: key_gpio_0 {
208 <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
210 pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
212 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
214 pinctrl_onewire_tm_default: onewire_tm_default {
216 <AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
222 usb0: gadget@00400000 {
223 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
224 pinctrl-names = "default";
225 pinctrl-0 = <&pinctrl_usba_vbus>;
229 usb1: ohci@00500000 {
232 &pioE 11 GPIO_ACTIVE_HIGH
233 &pioE 14 GPIO_ACTIVE_HIGH
238 usb2: ehci@00600000 {
242 nand0: nand@80000000 {
243 nand-bus-width = <8>;
244 nand-ecc-mode = "hw";
250 label = "at91bootstrap";
255 label = "bootloader";
256 reg = <0x40000 0x80000>;
259 bootloaderenv@c0000 {
260 label = "bootloader env";
261 reg = <0xc0000 0xc0000>;
265 label = "device tree";
266 reg = <0x180000 0x80000>;
271 reg = <0x200000 0x600000>;
276 reg = <0x800000 0x0f800000>;
282 compatible = "gpio-keys";
284 pinctrl-names = "default";
285 pinctrl-0 = <&pinctrl_key_gpio>;
289 gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
290 linux,code = <0x100>;
296 compatible = "gpio-leds";
301 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
302 default-state = "on";
307 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
308 linux,default-trigger = "heartbeat";
312 vcc_3v3_reg: fixedregulator@0 {
313 compatible = "regulator-fixed";
314 regulator-name = "VCC 3V3";
315 regulator-min-microvolt = <3300000>;
316 regulator-max-microvolt = <3300000>;
322 vcc_mmc1_reg: fixedregulator@1 {
323 compatible = "regulator-fixed";
324 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
325 regulator-name = "VDD MCI1";
326 regulator-min-microvolt = <3300000>;
327 regulator-max-microvolt = <3300000>;
328 vin-supply = <&vcc_3v3_reg>;