arch/arm/dts/armada-xp-maxbcm.dts

   1 /*
   2  * Device Tree file for Marvell Armada XP maxbcm board
   3  *
   4  * Copyright (C) 2013-2014 Marvell
   5  *
   6  * Lior Amsalem <alior@marvell.com>
   7  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   8  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   9  *
  10  * This file is dual-licensed: you can use it either under the terms
  11  * of the GPL or the X11 license, at your option. Note that this dual
  12  * licensing only applies to this file, and not this project as a
  13  * whole.
  14  *
  15  *  a) This file is free software; you can redistribute it and/or
  16  *     modify it under the terms of the GNU General Public License as
  17  *     published by the Free Software Foundation; either version 2 of the
  18  *     License, or (at your option) any later version.
  19  *
  20  *     This file is distributed in the hope that it will be useful
  21  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  *     GNU General Public License for more details.
  24  *
  25  * Or, alternatively
  26  *
  27  *  b) Permission is hereby granted, free of charge, to any person
  28  *     obtaining a copy of this software and associated documentation
  29  *     files (the "Software"), to deal in the Software without
  30  *     restriction, including without limitation the rights to use
  31  *     copy, modify, merge, publish, distribute, sublicense, and/or
  32  *     sell copies of the Software, and to permit persons to whom the
  33  *     Software is furnished to do so, subject to the following
  34  *     conditions:
  35  *
  36  *     The above copyright notice and this permission notice shall be
  37  *     included in all copies or substantial portions of the Software.
  38  *
  39  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  40  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  41  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  42  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  43  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  44  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  45  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  46  *     OTHER DEALINGS IN THE SOFTWARE.
  47  *
  48  * Note: this Device Tree assumes that the bootloader has remapped the
  49  * internal registers to 0xf1000000 (instead of the default
  50  * 0xd0000000). The 0xf1000000 is the default used by the recent,
  51  * DT-capable, U-Boot bootloaders provided by Marvell. Some earlier
  52  * boards were delivered with an older version of the bootloader that
  53  * left internal registers mapped at 0xd0000000. If you are in this
  54  * situation, you should either update your bootloader (preferred
  55  * solution) or the below Device Tree should be adjusted.
  56  */
  57
  58 /dts-v1/;
  59 #include <dt-bindings/gpio/gpio.h>
  60 #include "armada-xp-mv78460.dtsi"
  61
  62 / {
  63         model = "Marvell Armada XP MAXBCM";
  64         compatible = "marvell,axp-gp", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp";
  65
  66         chosen {
  67                 stdout-path = "serial0:115200n8";
  68         };
  69
  70         aliases {
  71                 spi0 = &spi0;
  72         };
  73
  74         memory {
  75                 device_type = "memory";
  76                 /*
  77                  * 8 GB of plug-in RAM modules by default.The amount
  78                  * of memory available can be changed by the
  79                  * bootloader according the size of the module
  80                  * actually plugged. However, memory between
  81                  * 0xF0000000 to 0xFFFFFFFF cannot be used, as it is
  82                  * the address range used for I/O (internal registers,
  83                  * MBus windows).
  84                  */
  85                 reg = <0x00000000 0x00000000 0x00000000 0xf0000000>,
  86                       <0x00000001 0x00000000 0x00000001 0x00000000>;
  87         };
  88
  89         cpus {
  90                 pm_pic {
  91                         ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
  92                                      <&gpio0 17 GPIO_ACTIVE_LOW>,
  93                                      <&gpio0 18 GPIO_ACTIVE_LOW>;
  94                 };
  95         };
  96
  97         soc {
  98                 ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
  99                           MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
 100                           MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000>;
 101
 102                 devbus-bootcs {
 103                         status = "okay";
 104
 105                         /* Device Bus parameters are required */
 106
 107                         /* Read parameters */
 108                         devbus,bus-width    = <16>;
 109                         devbus,turn-off-ps  = <60000>;
 110                         devbus,badr-skew-ps = <0>;
 111                         devbus,acc-first-ps = <124000>;
 112                         devbus,acc-next-ps  = <248000>;
 113                         devbus,rd-setup-ps  = <0>;
 114                         devbus,rd-hold-ps   = <0>;
 115
 116                         /* Write parameters */
 117                         devbus,sync-enable = <0>;
 118                         devbus,wr-high-ps  = <60000>;
 119                         devbus,wr-low-ps   = <60000>;
 120                         devbus,ale-wr-ps   = <60000>;
 121
 122                         /* NOR 16 MiB */
 123                         nor@0 {
 124                                 compatible = "cfi-flash";
 125                                 reg = <0 0x1000000>;
 126                                 bank-width = <2>;
 127                         };
 128                 };
 129
 130                 pcie-controller {
 131                         status = "okay";
 132
 133                         /*
 134                          * The 3 slots are physically present as
 135                          * standard PCIe slots on the board.
 136                          */
 137                         pcie@1,0 {
 138                                 /* Port 0, Lane 0 */
 139                                 status = "okay";
 140                         };
 141                         pcie@9,0 {
 142                                 /* Port 2, Lane 0 */
 143                                 status = "okay";
 144                         };
 145                         pcie@10,0 {
 146                                 /* Port 3, Lane 0 */
 147                                 status = "okay";
 148                         };
 149                 };
 150
 151                 internal-regs {
 152                         serial@12000 {
 153                                 status = "okay";
 154                                 u-boot,dm-pre-reloc;
 155                         };
 156                         serial@12100 {
 157                                 status = "okay";
 158                         };
 159                         serial@12200 {
 160                                 status = "okay";
 161                         };
 162                         serial@12300 {
 163                                 status = "okay";
 164                         };
 165                         pinctrl {
 166                                 pinctrl-0 = <&pic_pins>;
 167                                 pinctrl-names = "default";
 168                                 pic_pins: pic-pins-0 {
 169                                         marvell,pins = "mpp16", "mpp17",
 170                                                        "mpp18";
 171                                         marvell,function = "gpio";
 172                                 };
 173                         };
 174                         sata@a0000 {
 175                                 nr-ports = <2>;
 176                                 status = "okay";
 177                         };
 178
 179                         mdio {
 180                                 phy0: ethernet-phy@0 {
 181                                         reg = <0>;
 182                                 };
 183
 184                                 phy1: ethernet-phy@1 {
 185                                         reg = <1>;
 186                                 };
 187
 188                                 phy2: ethernet-phy@2 {
 189                                         reg = <2>;
 190                                 };
 191
 192                                 phy3: ethernet-phy@3 {
 193                                         reg = <3>;
 194                                 };
 195                         };
 196
 197                         ethernet@70000 {
 198                                 status = "okay";
 199                                 phy = <&phy0>;
 200                                 phy-mode = "sgmii";
 201                         };
 202                         ethernet@74000 {
 203                                 status = "okay";
 204                                 phy = <&phy1>;
 205                                 phy-mode = "sgmii";
 206                         };
 207                         ethernet@30000 {
 208                                 status = "okay";
 209                                 phy = <&phy2>;
 210                                 phy-mode = "sgmii";
 211                         };
 212                         ethernet@34000 {
 213                                 status = "okay";
 214                                 phy = <&phy3>;
 215                                 phy-mode = "sgmii";
 216                         };
 217
 218                         /* Front-side USB slot */
 219                         usb@50000 {
 220                                 status = "okay";
 221                         };
 222
 223                         /* Back-side USB slot */
 224                         usb@51000 {
 225                                 status = "okay";
 226                         };
 227
 228                         spi0: spi@10600 {
 229                                 status = "okay";
 230
 231                                 spi-flash@0 {
 232                                         #address-cells = <1>;
 233                                         #size-cells = <1>;
 234                                         compatible = "n25q128a13", "jedec,spi-nor";
 235                                         reg = <0>; /* Chip select 0 */
 236                                         spi-max-frequency = <108000000>;
 237                                 };
 238                         };
 239
 240                         nand@d0000 {
 241                                 status = "okay";
 242                                 num-cs = <1>;
 243                                 marvell,nand-keep-config;
 244                                 marvell,nand-enable-arbiter;
 245                                 nand-on-flash-bbt;
 246                         };
 247                 };
 248         };
 249 };