arch/arm/dts/armada-375.dtsi

   1 /*
   2  * Device Tree Include file for Marvell Armada 375 family SoC
   3  *
   4  * Copyright (C) 2014 Marvell
   5  *
   6  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   7  * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
   8  *
   9  * This file is dual-licensed: you can use it either under the terms
  10  * of the GPL or the X11 license, at your option. Note that this dual
  11  * licensing only applies to this file, and not this project as a
  12  * whole.
  13  *
  14  *  a) This file is free software; you can redistribute it and/or
  15  *     modify it under the terms of the GNU General Public License as
  16  *     published by the Free Software Foundation; either version 2 of the
  17  *     License, or (at your option) any later version.
  18  *
  19  *     This file is distributed in the hope that it will be useful
  20  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  *     GNU General Public License for more details.
  23  *
  24  * Or, alternatively
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include "skeleton.dtsi"
  49 #include <dt-bindings/interrupt-controller/arm-gic.h>
  50 #include <dt-bindings/interrupt-controller/irq.h>
  51 #include <dt-bindings/phy/phy.h>
  52
  53 #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
  54
  55 / {
  56         model = "Marvell Armada 375 family SoC";
  57         compatible = "marvell,armada375";
  58
  59         aliases {
  60                 gpio0 = &gpio0;
  61                 gpio1 = &gpio1;
  62                 gpio2 = &gpio2;
  63                 serial0 = &uart0;
  64                 serial1 = &uart1;
  65         };
  66
  67         clocks {
  68                 /* 2 GHz fixed main PLL */
  69                 mainpll: mainpll {
  70                         compatible = "fixed-clock";
  71                         #clock-cells = <0>;
  72                         clock-frequency = <1000000000>;
  73                 };
  74                 /* 25 MHz reference crystal */
  75                 refclk: oscillator {
  76                         compatible = "fixed-clock";
  77                         #clock-cells = <0>;
  78                         clock-frequency = <25000000>;
  79                 };
  80         };
  81
  82         cpus {
  83                 #address-cells = <1>;
  84                 #size-cells = <0>;
  85                 enable-method = "marvell,armada-375-smp";
  86
  87                 cpu@0 {
  88                         device_type = "cpu";
  89                         compatible = "arm,cortex-a9";
  90                         reg = <0>;
  91                 };
  92                 cpu@1 {
  93                         device_type = "cpu";
  94                         compatible = "arm,cortex-a9";
  95                         reg = <1>;
  96                 };
  97         };
  98
  99         pmu {
 100                 compatible = "arm,cortex-a9-pmu";
 101                 interrupts-extended = <&mpic 3>;
 102         };
 103
 104         soc {
 105                 compatible = "marvell,armada375-mbus", "simple-bus";
 106                 #address-cells = <2>;
 107                 #size-cells = <1>;
 108                 controller = <&mbusc>;
 109                 interrupt-parent = <&gic>;
 110                 pcie-mem-aperture = <0xe0000000 0x8000000>;
 111                 pcie-io-aperture  = <0xe8000000 0x100000>;
 112
 113                 bootrom {
 114                         compatible = "marvell,bootrom";
 115                         reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
 116                 };
 117
 118                 devbus-bootcs {
 119                         compatible = "marvell,mvebu-devbus";
 120                         reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
 121                         ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
 122                         #address-cells = <1>;
 123                         #size-cells = <1>;
 124                         clocks = <&coreclk 0>;
 125                         status = "disabled";
 126                 };
 127
 128                 devbus-cs0 {
 129                         compatible = "marvell,mvebu-devbus";
 130                         reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
 131                         ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
 132                         #address-cells = <1>;
 133                         #size-cells = <1>;
 134                         clocks = <&coreclk 0>;
 135                         status = "disabled";
 136                 };
 137
 138                 devbus-cs1 {
 139                         compatible = "marvell,mvebu-devbus";
 140                         reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
 141                         ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
 142                         #address-cells = <1>;
 143                         #size-cells = <1>;
 144                         clocks = <&coreclk 0>;
 145                         status = "disabled";
 146                 };
 147
 148                 devbus-cs2 {
 149                         compatible = "marvell,mvebu-devbus";
 150                         reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
 151                         ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
 152                         #address-cells = <1>;
 153                         #size-cells = <1>;
 154                         clocks = <&coreclk 0>;
 155                         status = "disabled";
 156                 };
 157
 158                 devbus-cs3 {
 159                         compatible = "marvell,mvebu-devbus";
 160                         reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
 161                         ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
 162                         #address-cells = <1>;
 163                         #size-cells = <1>;
 164                         clocks = <&coreclk 0>;
 165                         status = "disabled";
 166                 };
 167
 168                 internal-regs {
 169                         compatible = "simple-bus";
 170                         #address-cells = <1>;
 171                         #size-cells = <1>;
 172                         ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
 173
 174                         L2: cache-controller@8000 {
 175                                 compatible = "arm,pl310-cache";
 176                                 reg = <0x8000 0x1000>;
 177                                 cache-unified;
 178                                 cache-level = <2>;
 179                                 arm,double-linefill-incr = <1>;
 180                                 arm,double-linefill-wrap = <0>;
 181                                 arm,double-linefill = <1>;
 182                                 prefetch-data = <1>;
 183                         };
 184
 185                         scu@c000 {
 186                                 compatible = "arm,cortex-a9-scu";
 187                                 reg = <0xc000 0x58>;
 188                         };
 189
 190                         timer0: timer@c600 {
 191                                 compatible = "arm,cortex-a9-twd-timer";
 192                                 reg = <0xc600 0x20>;
 193                                 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
 194                                 clocks = <&coreclk 2>;
 195                         };
 196
 197                         gic: interrupt-controller@d000 {
 198                                 compatible = "arm,cortex-a9-gic";
 199                                 #interrupt-cells = <3>;
 200                                 #size-cells = <0>;
 201                                 interrupt-controller;
 202                                 reg = <0xd000 0x1000>,
 203                                       <0xc100 0x100>;
 204                         };
 205
 206                         mdio {
 207                                 #address-cells = <1>;
 208                                 #size-cells = <0>;
 209                                 compatible = "marvell,orion-mdio";
 210                                 reg = <0xc0054 0x4>;
 211                                 clocks = <&gateclk 19>;
 212                         };
 213
 214                         /* Network controller */
 215                         ethernet@f0000 {
 216                                 compatible = "marvell,armada-375-pp2";
 217                                 reg = <0xf0000 0xa000>, /* Packet Processor regs */
 218                                       <0xc0000 0x3060>, /* LMS regs */
 219                                       <0xc4000 0x100>,  /* eth0 regs */
 220                                       <0xc5000 0x100>;  /* eth1 regs */
 221                                 clocks = <&gateclk 3>, <&gateclk 19>;
 222                                 clock-names = "pp_clk", "gop_clk";
 223                                 status = "disabled";
 224
 225                                 eth0: eth0@c4000 {
 226                                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 227                                         port-id = <0>;
 228                                         status = "disabled";
 229                                 };
 230
 231                                 eth1: eth1@c5000 {
 232                                         interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 233                                         port-id = <1>;
 234                                         status = "disabled";
 235                                 };
 236                         };
 237
 238                         rtc@10300 {
 239                                 compatible = "marvell,orion-rtc";
 240                                 reg = <0x10300 0x20>;
 241                                 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
 242                         };
 243
 244                         spi0: spi@10600 {
 245                                 compatible = "marvell,armada-375-spi",
 246                                                 "marvell,orion-spi";
 247                                 reg = <0x10600 0x50>;
 248                                 #address-cells = <1>;
 249                                 #size-cells = <0>;
 250                                 cell-index = <0>;
 251                                 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 252                                 clocks = <&coreclk 0>;
 253                                 status = "disabled";
 254                         };
 255
 256                         spi1: spi@10680 {
 257                                 compatible = "marvell,armada-375-spi",
 258                                                 "marvell,orion-spi";
 259                                 reg = <0x10680 0x50>;
 260                                 #address-cells = <1>;
 261                                 #size-cells = <0>;
 262                                 cell-index = <1>;
 263                                 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 264                                 clocks = <&coreclk 0>;
 265                                 status = "disabled";
 266                         };
 267
 268                         i2c0: i2c@11000 {
 269                                 compatible = "marvell,mv64xxx-i2c";
 270                                 reg = <0x11000 0x20>;
 271                                 #address-cells = <1>;
 272                                 #size-cells = <0>;
 273                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 274                                 timeout-ms = <1000>;
 275                                 clocks = <&coreclk 0>;
 276                                 status = "disabled";
 277                         };
 278
 279                         i2c1: i2c@11100 {
 280                                 compatible = "marvell,mv64xxx-i2c";
 281                                 reg = <0x11100 0x20>;
 282                                 #address-cells = <1>;
 283                                 #size-cells = <0>;
 284                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 285                                 timeout-ms = <1000>;
 286                                 clocks = <&coreclk 0>;
 287                                 status = "disabled";
 288                         };
 289
 290                         uart0: serial@12000 {
 291                                 compatible = "snps,dw-apb-uart";
 292                                 reg = <0x12000 0x100>;
 293                                 reg-shift = <2>;
 294                                 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 295                                 reg-io-width = <1>;
 296                                 clocks = <&coreclk 0>;
 297                                 status = "disabled";
 298                         };
 299
 300                         uart1: serial@12100 {
 301                                 compatible = "snps,dw-apb-uart";
 302                                 reg = <0x12100 0x100>;
 303                                 reg-shift = <2>;
 304                                 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 305                                 reg-io-width = <1>;
 306                                 clocks = <&coreclk 0>;
 307                                 status = "disabled";
 308                         };
 309
 310                         pinctrl {
 311                                 compatible = "marvell,mv88f6720-pinctrl";
 312                                 reg = <0x18000 0x24>;
 313
 314                                 i2c0_pins: i2c0-pins {
 315                                         marvell,pins = "mpp14",  "mpp15";
 316                                         marvell,function = "i2c0";
 317                                 };
 318
 319                                 i2c1_pins: i2c1-pins {
 320                                         marvell,pins = "mpp61",  "mpp62";
 321                                         marvell,function = "i2c1";
 322                                 };
 323
 324                                 nand_pins: nand-pins {
 325                                         marvell,pins = "mpp0", "mpp1", "mpp2",
 326                                                 "mpp3", "mpp4", "mpp5",
 327                                                 "mpp6", "mpp7", "mpp8",
 328                                                 "mpp9", "mpp10", "mpp11",
 329                                                 "mpp12", "mpp13";
 330                                         marvell,function = "nand";
 331                                 };
 332
 333                                 sdio_pins: sdio-pins {
 334                                         marvell,pins = "mpp24",  "mpp25", "mpp26",
 335                                                      "mpp27", "mpp28", "mpp29";
 336                                         marvell,function = "sd";
 337                                 };
 338
 339                                 spi0_pins: spi0-pins {
 340                                         marvell,pins = "mpp0",  "mpp1", "mpp4",
 341                                                      "mpp5", "mpp8", "mpp9";
 342                                         marvell,function = "spi0";
 343                                 };
 344                         };
 345
 346                         gpio0: gpio@18100 {
 347                                 compatible = "marvell,orion-gpio";
 348                                 reg = <0x18100 0x40>;
 349                                 ngpios = <32>;
 350                                 gpio-controller;
 351                                 #gpio-cells = <2>;
 352                                 interrupt-controller;
 353                                 #interrupt-cells = <2>;
 354                                 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 355                                              <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 356                                              <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 357                                              <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
 358                         };
 359
 360                         gpio1: gpio@18140 {
 361                                 compatible = "marvell,orion-gpio";
 362                                 reg = <0x18140 0x40>;
 363                                 ngpios = <32>;
 364                                 gpio-controller;
 365                                 #gpio-cells = <2>;
 366                                 interrupt-controller;
 367                                 #interrupt-cells = <2>;
 368                                 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 369                                              <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
 370                                              <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
 371                                              <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 372                         };
 373
 374                         gpio2: gpio@18180 {
 375                                 compatible = "marvell,orion-gpio";
 376                                 reg = <0x18180 0x40>;
 377                                 ngpios = <3>;
 378                                 gpio-controller;
 379                                 #gpio-cells = <2>;
 380                                 interrupt-controller;
 381                                 #interrupt-cells = <2>;
 382                                 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 383                         };
 384
 385                         systemc: system-controller@18200 {
 386                                 compatible = "marvell,armada-375-system-controller";
 387                                 reg = <0x18200 0x100>;
 388                                 #reset-cells = <2>;
 389                         };
 390
 391                         gateclk: clock-gating-control@18220 {
 392                                 compatible = "marvell,armada-375-gating-clock";
 393                                 reg = <0x18220 0x4>;
 394                                 clocks = <&coreclk 0>;
 395                                 #clock-cells = <1>;
 396                         };
 397
 398                         usbcluster: usb-cluster@18400 {
 399                                 compatible = "marvell,armada-375-usb-cluster";
 400                                 reg = <0x18400 0x4>;
 401                                 #phy-cells = <1>;
 402                         };
 403
 404                         mbusc: mbus-controller@20000 {
 405                                 compatible = "marvell,mbus-controller";
 406                                 reg = <0x20000 0x100>, <0x20180 0x20>;
 407                         };
 408
 409                         mpic: interrupt-controller@20a00 {
 410                                 compatible = "marvell,mpic";
 411                                 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
 412                                 #interrupt-cells = <1>;
 413                                 #size-cells = <1>;
 414                                 interrupt-controller;
 415                                 msi-controller;
 416                                 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
 417                         };
 418
 419                         timer1: timer@20300 {
 420                                 compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
 421                                 reg = <0x20300 0x30>, <0x21040 0x30>;
 422                                 interrupts-extended = <&gic  GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
 423                                                       <&gic  GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
 424                                                       <&gic  GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
 425                                                       <&gic  GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 426                                                       <&mpic 5>,
 427                                                       <&mpic 6>;
 428                                 clocks = <&coreclk 0>, <&refclk>;
 429                                 clock-names = "nbclk", "fixed";
 430                         };
 431
 432                         watchdog@20300 {
 433                                 compatible = "marvell,armada-375-wdt";
 434                                 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
 435                                 clocks = <&coreclk 0>, <&refclk>;
 436                                 clock-names = "nbclk", "fixed";
 437                         };
 438
 439                         cpurst@20800 {
 440                                 compatible = "marvell,armada-370-cpu-reset";
 441                                 reg = <0x20800 0x10>;
 442                         };
 443
 444                         coherency-fabric@21010 {
 445                                 compatible = "marvell,armada-375-coherency-fabric";
 446                                 reg = <0x21010 0x1c>;
 447                         };
 448
 449                         usb@50000 {
 450                                 compatible = "marvell,orion-ehci";
 451                                 reg = <0x50000 0x500>;
 452                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 453                                 clocks = <&gateclk 18>;
 454                                 phys = <&usbcluster PHY_TYPE_USB2>;
 455                                 phy-names = "usb";
 456                                 status = "disabled";
 457                         };
 458
 459                         usb@54000 {
 460                                 compatible = "marvell,orion-ehci";
 461                                 reg = <0x54000 0x500>;
 462                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 463                                 clocks = <&gateclk 26>;
 464                                 status = "disabled";
 465                         };
 466
 467                         usb3@58000 {
 468                                 compatible = "marvell,armada-375-xhci";
 469                                 reg = <0x58000 0x20000>,<0x5b880 0x80>;
 470                                 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
 471                                 clocks = <&gateclk 16>;
 472                                 phys = <&usbcluster PHY_TYPE_USB3>;
 473                                 phy-names = "usb";
 474                                 status = "disabled";
 475                         };
 476
 477                         xor@60800 {
 478                                 compatible = "marvell,orion-xor";
 479                                 reg = <0x60800 0x100
 480                                        0x60A00 0x100>;
 481                                 clocks = <&gateclk 22>;
 482                                 status = "okay";
 483
 484                                 xor00 {
 485                                         interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 486                                         dmacap,memcpy;
 487                                         dmacap,xor;
 488                                 };
 489                                 xor01 {
 490                                         interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 491                                         dmacap,memcpy;
 492                                         dmacap,xor;
 493                                         dmacap,memset;
 494                                 };
 495                         };
 496
 497                         xor@60900 {
 498                                 compatible = "marvell,orion-xor";
 499                                 reg = <0x60900 0x100
 500                                        0x60b00 0x100>;
 501                                 clocks = <&gateclk 23>;
 502                                 status = "okay";
 503
 504                                 xor10 {
 505                                         interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 506                                         dmacap,memcpy;
 507                                         dmacap,xor;
 508                                 };
 509                                 xor11 {
 510                                         interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
 511                                         dmacap,memcpy;
 512                                         dmacap,xor;
 513                                         dmacap,memset;
 514                                 };
 515                         };
 516
 517                         crypto@90000 {
 518                                 compatible = "marvell,armada-375-crypto";
 519                                 reg = <0x90000 0x10000>;
 520                                 reg-names = "regs";
 521                                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 522                                              <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
 523                                 clocks = <&gateclk 30>, <&gateclk 31>,
 524                                          <&gateclk 28>, <&gateclk 29>;
 525                                 clock-names = "cesa0", "cesa1",
 526                                               "cesaz0", "cesaz1";
 527                                 marvell,crypto-srams = <&crypto_sram0>,
 528                                                        <&crypto_sram1>;
 529                                 marvell,crypto-sram-size = <0x800>;
 530                         };
 531
 532                         sata@a0000 {
 533                                 compatible = "marvell,orion-sata";
 534                                 reg = <0xa0000 0x5000>;
 535                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 536                                 clocks = <&gateclk 14>, <&gateclk 20>;
 537                                 clock-names = "0", "1";
 538                                 status = "disabled";
 539                         };
 540
 541                         nand@d0000 {
 542                                 compatible = "marvell,armada370-nand-controller";
 543                                 reg = <0xd0000 0x54>;
 544                                 #address-cells = <1>;
 545                                 #size-cells = <1>;
 546                                 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 547                                 clocks = <&gateclk 11>;
 548                                 status = "disabled";
 549                         };
 550
 551                         mvsdio@d4000 {
 552                                 compatible = "marvell,orion-sdio";
 553                                 reg = <0xd4000 0x200>;
 554                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 555                                 clocks = <&gateclk 17>;
 556                                 bus-width = <4>;
 557                                 cap-sdio-irq;
 558                                 cap-sd-highspeed;
 559                                 cap-mmc-highspeed;
 560                                 status = "disabled";
 561                         };
 562
 563                         thermal@e8078 {
 564                                 compatible = "marvell,armada375-thermal";
 565                                 reg = <0xe8078 0x4>, <0xe807c 0x8>;
 566                                 status = "okay";
 567                         };
 568
 569                         coreclk: mvebu-sar@e8204 {
 570                                 compatible = "marvell,armada-375-core-clock";
 571                                 reg = <0xe8204 0x04>;
 572                                 #clock-cells = <1>;
 573                         };
 574
 575                         coredivclk: corediv-clock@e8250 {
 576                                 compatible = "marvell,armada-375-corediv-clock";
 577                                 reg = <0xe8250 0xc>;
 578                                 #clock-cells = <1>;
 579                                 clocks = <&mainpll>;
 580                                 clock-output-names = "nand";
 581                         };
 582                 };
 583
 584                 pciec: pcie@82000000 {
 585                         compatible = "marvell,armada-370-pcie";
 586                         status = "disabled";
 587                         device_type = "pci";
 588
 589                         #address-cells = <3>;
 590                         #size-cells = <2>;
 591
 592                         msi-parent = <&mpic>;
 593                         bus-range = <0x00 0xff>;
 594
 595                         ranges =
 596                                <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
 597                                 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
 598                                 0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0 MEM */
 599                                 0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0 IO  */
 600                                 0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1 MEM */
 601                                 0x81000000 0x2 0       MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1 IO  */>;
 602
 603                         pcie0: pcie@1,0 {
 604                                 device_type = "pci";
 605                                 assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
 606                                 reg = <0x0800 0 0 0 0>;
 607                                 #address-cells = <3>;
 608                                 #size-cells = <2>;
 609                                 #interrupt-cells = <1>;
 610                                 ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
 611                                           0x81000000 0 0 0x81000000 0x1 0 1 0>;
 612                                 bus-range = <0x00 0xff>;
 613                                 interrupt-map-mask = <0 0 0 0>;
 614                                 interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 615                                 marvell,pcie-port = <0>;
 616                                 marvell,pcie-lane = <0>;
 617                                 clocks = <&gateclk 5>;
 618                                 resets = <&systemc 0 0>;
 619                                 status = "disabled";
 620                         };
 621
 622                         pcie1: pcie@2,0 {
 623                                 device_type = "pci";
 624                                 assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
 625                                 reg = <0x1000 0 0 0 0>;
 626                                 #address-cells = <3>;
 627                                 #size-cells = <2>;
 628                                 #interrupt-cells = <1>;
 629                                 ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
 630                                           0x81000000 0 0 0x81000000 0x2 0 1 0>;
 631                                 bus-range = <0x00 0xff>;
 632                                 interrupt-map-mask = <0 0 0 0>;
 633                                 interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 634                                 marvell,pcie-port = <0>;
 635                                 marvell,pcie-lane = <1>;
 636                                 clocks = <&gateclk 6>;
 637                                 resets = <&systemc 0 1>;
 638                                 status = "disabled";
 639                         };
 640
 641                 };
 642
 643                 crypto_sram0: sa-sram0 {
 644                         compatible = "mmio-sram";
 645                         reg = <MBUS_ID(0x09, 0x09) 0 0x800>;
 646                         clocks = <&gateclk 30>;
 647                         #address-cells = <1>;
 648                         #size-cells = <1>;
 649                         ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>;
 650                 };
 651
 652                 crypto_sram1: sa-sram1 {
 653                         compatible = "mmio-sram";
 654                         reg = <MBUS_ID(0x09, 0x05) 0 0x800>;
 655                         clocks = <&gateclk 31>;
 656                         #address-cells = <1>;
 657                         #size-cells = <1>;
 658                         ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>;
 659                 };
 660         };
 661 };