arch/arm/dts/am437x-sk-evm.dts

   1 /*
   2  * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM437x SK EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/pwm/pwm.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17 #include <dt-bindings/input/input.h>
  18
  19 / {
  20         model = "TI AM437x SK EVM";
  21         compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43";
  22
  23         aliases {
  24                 display0 = &lcd0;
  25         };
  26
  27         chosen {
  28                 stdout-path = &uart0;
  29                 tick-timer = &timer2;
  30         };
  31
  32         backlight {
  33                 compatible = "pwm-backlight";
  34                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  35                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  36                 default-brightness-level = <8>;
  37         };
  38
  39         sound {
  40                 compatible = "ti,da830-evm-audio";
  41                 ti,model = "AM437x-SK-EVM";
  42                 ti,audio-codec = <&tlv320aic3106>;
  43                 ti,mcasp-controller = <&mcasp1>;
  44                 ti,codec-clock-rate = <24000000>;
  45                 ti,audio-routing =
  46                         "Headphone Jack",       "HPLOUT",
  47                         "Headphone Jack",       "HPROUT";
  48         };
  49
  50         matrix_keypad: matrix_keypad@0 {
  51                 compatible = "gpio-matrix-keypad";
  52
  53                 pinctrl-names = "default";
  54                 pinctrl-0 = <&matrix_keypad_pins>;
  55
  56                 debounce-delay-ms = <5>;
  57                 col-scan-delay-us = <5>;
  58
  59                 row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH          /* Bank5, pin5 */
  60                                 &gpio5 6 GPIO_ACTIVE_HIGH>;     /* Bank5, pin6 */
  61
  62                 col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH         /* Bank5, pin13 */
  63                                 &gpio5 4 GPIO_ACTIVE_HIGH>;     /* Bank5, pin4 */
  64
  65                 linux,keymap = <
  66                                 MATRIX_KEY(0, 0, KEY_DOWN)
  67                                 MATRIX_KEY(0, 1, KEY_RIGHT)
  68                                 MATRIX_KEY(1, 0, KEY_LEFT)
  69                                 MATRIX_KEY(1, 1, KEY_UP)
  70                         >;
  71         };
  72
  73         leds {
  74                 compatible = "gpio-leds";
  75
  76                 pinctrl-names = "default";
  77                 pinctrl-0 = <&leds_pins>;
  78
  79                 led@0 {
  80                         label = "am437x-sk:red:heartbeat";
  81                         gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 0 */
  82                         linux,default-trigger = "heartbeat";
  83                         default-state = "off";
  84                 };
  85
  86                 led@1 {
  87                         label = "am437x-sk:green:mmc1";
  88                         gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 1 */
  89                         linux,default-trigger = "mmc0";
  90                         default-state = "off";
  91                 };
  92
  93                 led@2 {
  94                         label = "am437x-sk:blue:cpu0";
  95                         gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 2 */
  96                         linux,default-trigger = "cpu0";
  97                         default-state = "off";
  98                 };
  99
 100                 led@3 {
 101                         label = "am437x-sk:blue:usr3";
 102                         gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;    /* Bank 5, pin 3 */
 103                         default-state = "off";
 104                 };
 105         };
 106
 107         lcd0: display {
 108                 compatible = "newhaven,nhd-4.3-480272ef-atxl", "panel-dpi";
 109                 label = "lcd";
 110
 111                 pinctrl-names = "default";
 112                 pinctrl-0 = <&lcd_pins>;
 113
 114                 enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 115
 116                 panel-timing {
 117                         clock-frequency = <9000000>;
 118                         hactive = <480>;
 119                         vactive = <272>;
 120                         hfront-porch = <2>;
 121                         hback-porch = <2>;
 122                         hsync-len = <41>;
 123                         vfront-porch = <2>;
 124                         vback-porch = <2>;
 125                         vsync-len = <10>;
 126                         hsync-active = <0>;
 127                         vsync-active = <0>;
 128                         de-active = <1>;
 129                         pixelclk-active = <1>;
 130                 };
 131
 132                 port {
 133                         lcd_in: endpoint {
 134                                 remote-endpoint = <&dpi_out>;
 135                         };
 136                 };
 137         };
 138 };
 139
 140 &am43xx_pinmux {
 141         matrix_keypad_pins: matrix_keypad_pins {
 142                 pinctrl-single,pins = <
 143                         0x24c (PIN_OUTPUT | MUX_MODE7)  /* gpio5_13.gpio5_13 */
 144                         0x250 (PIN_OUTPUT | MUX_MODE7)  /* spi4_sclk.gpio5_4 */
 145                         0x254 (PIN_INPUT | MUX_MODE7)   /* spi4_d0.gpio5_5 */
 146                         0x258 (PIN_INPUT | MUX_MODE7)   /* spi4_d1.gpio5_5 */
 147                 >;
 148         };
 149
 150         leds_pins: leds_pins {
 151                 pinctrl-single,pins = <
 152                         0x228 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rxd.gpio5_2 */
 153                         0x22c (PIN_OUTPUT | MUX_MODE7)  /* uart3_txd.gpio5_3 */
 154                         0x230 (PIN_OUTPUT | MUX_MODE7)  /* uart3_ctsn.gpio5_0 */
 155                         0x234 (PIN_OUTPUT | MUX_MODE7)  /* uart3_rtsn.gpio5_1 */
 156                 >;
 157         };
 158
 159         i2c0_pins: i2c0_pins {
 160                 pinctrl-single,pins = <
 161                         0x188 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 162                         0x18c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 163                 >;
 164         };
 165
 166         i2c1_pins: i2c1_pins {
 167                 pinctrl-single,pins = <
 168                         0x15c (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 169                         0x158 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 170                 >;
 171         };
 172
 173         mmc1_pins: pinmux_mmc1_pins {
 174                 pinctrl-single,pins = <
 175                         0x0f0 (PIN_INPUT | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
 176                         0x0f4 (PIN_INPUT | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
 177                         0x0f8 (PIN_INPUT | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
 178                         0x0fc (PIN_INPUT | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
 179                         0x100 (PIN_INPUT | MUX_MODE0) /* mmc0_clk.mmc0_clk */
 180                         0x104 (PIN_INPUT | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
 181                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 182                 >;
 183         };
 184
 185         ecap0_pins: backlight_pins {
 186                 pinctrl-single,pins = <
 187                         0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */
 188                 >;
 189         };
 190
 191         edt_ft5306_ts_pins: edt_ft5306_ts_pins {
 192                 pinctrl-single,pins = <
 193                         0x74 (PIN_INPUT | MUX_MODE7)    /* gpmc_wpn.gpio0_31 */
 194                         0x78 (PIN_OUTPUT | MUX_MODE7)   /* gpmc_be1n.gpio1_28 */
 195                 >;
 196         };
 197
 198         vpfe0_pins_default: vpfe0_pins_default {
 199                 pinctrl-single,pins = <
 200                         0x1b0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 201                         0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
 202                         0x1b8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_field mode 0*/
 203                         0x1bc (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_wen mode 0*/
 204                         0x1c0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
 205                         0x1c4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
 206                         0x1c8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
 207                         0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
 208                         0x20c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
 209                         0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
 210                         0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
 211                         0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
 212                         0x21c (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
 213                         0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
 214                         0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 215                 >;
 216         };
 217
 218         vpfe0_pins_sleep: vpfe0_pins_sleep {
 219                 pinctrl-single,pins = <
 220                         0x1b0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 221                         0x1b4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 222                         0x1b8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 223                         0x1bc (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 224                         0x1c0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 225                         0x1c4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 226                         0x1c8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 227                         0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 228                         0x20c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 229                         0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 230                         0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 231                         0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 232                         0x21c (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 233                         0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 234                         0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
 235                 >;
 236         };
 237
 238         cpsw_default: cpsw_default {
 239                 pinctrl-single,pins = <
 240                         /* Slave 1 */
 241                         0x12c (PIN_OUTPUT | MUX_MODE2)  /* mii1_txclk.rmii1_tclk */
 242                         0x114 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txen.rgmii1_tctl */
 243                         0x128 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd0.rgmii1_td0 */
 244                         0x124 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd1.rgmii1_td1 */
 245                         0x120 (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd0.rgmii1_td2 */
 246                         0x11c (PIN_OUTPUT | MUX_MODE2)  /* mii1_txd1.rgmii1_td3 */
 247                         0x130 (PIN_INPUT | MUX_MODE2)   /* mii1_rxclk.rmii1_rclk */
 248                         0x118 (PIN_INPUT | MUX_MODE2)   /* mii1_rxdv.rgmii1_rctl */
 249                         0x140 (PIN_INPUT | MUX_MODE2)   /* mii1_rxd0.rgmii1_rd0 */
 250                         0x13c (PIN_INPUT | MUX_MODE2)   /* mii1_rxd1.rgmii1_rd1 */
 251                         0x138 (PIN_INPUT | MUX_MODE2)   /* mii1_rxd0.rgmii1_rd2 */
 252                         0x134 (PIN_INPUT | MUX_MODE2)   /* mii1_rxd1.rgmii1_rd3 */
 253
 254                         /* Slave 2 */
 255                         0x58 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a6.rgmii2_tclk */
 256                         0x40 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a0.rgmii2_tctl */
 257                         0x54 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a5.rgmii2_td0 */
 258                         0x50 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a4.rgmii2_td1 */
 259                         0x4c (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a3.rgmii2_td2 */
 260                         0x48 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_a2.rgmii2_td3 */
 261                         0x5c (PIN_INPUT | MUX_MODE2)    /* gpmc_a7.rgmii2_rclk */
 262                         0x44 (PIN_INPUT | MUX_MODE2)    /* gpmc_a1.rgmii2_rtcl */
 263                         0x6c (PIN_INPUT | MUX_MODE2)    /* gpmc_a11.rgmii2_rd0 */
 264                         0x68 (PIN_INPUT | MUX_MODE2)    /* gpmc_a10.rgmii2_rd1 */
 265                         0x64 (PIN_INPUT | MUX_MODE2)    /* gpmc_a9.rgmii2_rd2 */
 266                         0x60 (PIN_INPUT | MUX_MODE2)    /* gpmc_a8.rgmii2_rd3 */
 267                 >;
 268         };
 269
 270         cpsw_sleep: cpsw_sleep {
 271                 pinctrl-single,pins = <
 272                         /* Slave 1 reset value */
 273                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 274                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 275                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 276                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 277                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 278                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 279                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 280                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 281                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 282                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 283                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 284                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 285
 286                         /* Slave 2 reset value */
 287                         0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 288                         0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 289                         0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 290                         0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 291                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 292                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 293                         0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 294                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 295                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 296                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 297                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 298                         0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 299                 >;
 300         };
 301
 302         davinci_mdio_default: davinci_mdio_default {
 303                 pinctrl-single,pins = <
 304                         /* MDIO */
 305                         0x148 (PIN_INPUT | SLEWCTRL_FAST | MUX_MODE0)   /* mdio_data.mdio_data */
 306                         0x14c (PIN_OUTPUT | MUX_MODE0)                  /* mdio_clk.mdio_clk */
 307                 >;
 308         };
 309
 310         davinci_mdio_sleep: davinci_mdio_sleep {
 311                 pinctrl-single,pins = <
 312                         /* MDIO reset value */
 313                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 314                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 315                 >;
 316         };
 317
 318         dss_pins: dss_pins {
 319                 pinctrl-single,pins = <
 320                         0x020 (PIN_OUTPUT | MUX_MODE1)  /* gpmc ad 8 -> DSS DATA 23 */
 321                         0x024 (PIN_OUTPUT | MUX_MODE1)
 322                         0x028 (PIN_OUTPUT | MUX_MODE1)
 323                         0x02c (PIN_OUTPUT | MUX_MODE1)
 324                         0x030 (PIN_OUTPUT | MUX_MODE1)
 325                         0x034 (PIN_OUTPUT | MUX_MODE1)
 326                         0x038 (PIN_OUTPUT | MUX_MODE1)
 327                         0x03c (PIN_OUTPUT | MUX_MODE1)  /* gpmc ad 15 -> DSS DATA 16 */
 328                         0x0a0 (PIN_OUTPUT | MUX_MODE0)  /* DSS DATA 0 */
 329                         0x0a4 (PIN_OUTPUT | MUX_MODE0)
 330                         0x0a8 (PIN_OUTPUT | MUX_MODE0)
 331                         0x0ac (PIN_OUTPUT | MUX_MODE0)
 332                         0x0b0 (PIN_OUTPUT | MUX_MODE0)
 333                         0x0b4 (PIN_OUTPUT | MUX_MODE0)
 334                         0x0b8 (PIN_OUTPUT | MUX_MODE0)
 335                         0x0bc (PIN_OUTPUT | MUX_MODE0)
 336                         0x0c0 (PIN_OUTPUT | MUX_MODE0)
 337                         0x0c4 (PIN_OUTPUT | MUX_MODE0)
 338                         0x0c8 (PIN_OUTPUT | MUX_MODE0)
 339                         0x0cc (PIN_OUTPUT | MUX_MODE0)
 340                         0x0d0 (PIN_OUTPUT | MUX_MODE0)
 341                         0x0d4 (PIN_OUTPUT | MUX_MODE0)
 342                         0x0d8 (PIN_OUTPUT | MUX_MODE0)
 343                         0x0dc (PIN_OUTPUT | MUX_MODE0)  /* DSS DATA 15 */
 344                         0x0e0 (PIN_OUTPUT | MUX_MODE0)  /* DSS VSYNC */
 345                         0x0e4 (PIN_OUTPUT | MUX_MODE0)  /* DSS HSYNC */
 346                         0x0e8 (PIN_OUTPUT | MUX_MODE0)  /* DSS PCLK */
 347                         0x0ec (PIN_OUTPUT | MUX_MODE0)  /* DSS AC BIAS EN */
 348
 349                 >;
 350         };
 351
 352         qspi_pins: qspi_pins {
 353                 pinctrl-single,pins = <
 354                         0x7c (PIN_OUTPUT | MUX_MODE3)   /* gpmc_csn0.qspi_csn */
 355                         0x88 (PIN_OUTPUT | MUX_MODE2)   /* gpmc_csn3.qspi_clk */
 356                         0x90 (PIN_INPUT | MUX_MODE3)    /* gpmc_advn_ale.qspi_d0 */
 357                         0x94 (PIN_INPUT | MUX_MODE3)    /* gpmc_oen_ren.qspi_d1 */
 358                         0x98 (PIN_INPUT | MUX_MODE3)    /* gpmc_wen.qspi_d2 */
 359                         0x9c (PIN_INPUT | MUX_MODE3)    /* gpmc_be0n_cle.qspi_d3 */
 360                 >;
 361         };
 362
 363         mcasp1_pins: mcasp1_pins {
 364                 pinctrl-single,pins = <
 365                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_crs.mcasp1_aclkx */
 366                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* mii1_rxerr.mcasp1_fsx */
 367                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 368                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4)  /* rmii1_ref_clk.mcasp1_axr3 */
 369                 >;
 370         };
 371
 372         lcd_pins: lcd_pins {
 373                 pinctrl-single,pins = <
 374                         0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
 375                 >;
 376         };
 377
 378         usb1_pins: usb1_pins {
 379                 pinctrl-single,pins = <
 380                         0x2c0 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 381                 >;
 382         };
 383
 384         usb2_pins: usb2_pins {
 385                 pinctrl-single,pins = <
 386                         0x2c4 (PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
 387                 >;
 388         };
 389 };
 390
 391 &i2c0 {
 392         status = "okay";
 393         pinctrl-names = "default";
 394         pinctrl-0 = <&i2c0_pins>;
 395         clock-frequency = <400000>;
 396
 397         tps@24 {
 398                 compatible = "ti,tps65218";
 399                 reg = <0x24>;
 400                 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
 401                 interrupt-controller;
 402                 #interrupt-cells = <2>;
 403
 404                 dcdc1: regulator-dcdc1 {
 405                         compatible = "ti,tps65218-dcdc1";
 406                         /* VDD_CORE limits min of OPP50 and max of OPP100 */
 407                         regulator-name = "vdd_core";
 408                         regulator-min-microvolt = <912000>;
 409                         regulator-max-microvolt = <1144000>;
 410                         regulator-boot-on;
 411                         regulator-always-on;
 412                 };
 413
 414                 dcdc2: regulator-dcdc2 {
 415                         compatible = "ti,tps65218-dcdc2";
 416                         /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */
 417                         regulator-name = "vdd_mpu";
 418                         regulator-min-microvolt = <912000>;
 419                         regulator-max-microvolt = <1378000>;
 420                         regulator-boot-on;
 421                         regulator-always-on;
 422                 };
 423
 424                 dcdc3: regulator-dcdc3 {
 425                         compatible = "ti,tps65218-dcdc3";
 426                         regulator-name = "vdds_ddr";
 427                         regulator-min-microvolt = <1500000>;
 428                         regulator-max-microvolt = <1500000>;
 429                         regulator-boot-on;
 430                         regulator-always-on;
 431                 };
 432
 433                 dcdc4: regulator-dcdc4 {
 434                         compatible = "ti,tps65218-dcdc4";
 435                         regulator-name = "v3_3d";
 436                         regulator-min-microvolt = <3300000>;
 437                         regulator-max-microvolt = <3300000>;
 438                         regulator-boot-on;
 439                         regulator-always-on;
 440                 };
 441
 442                 ldo1: regulator-ldo1 {
 443                         compatible = "ti,tps65218-ldo1";
 444                         regulator-name = "v1_8d";
 445                         regulator-min-microvolt = <1800000>;
 446                         regulator-max-microvolt = <1800000>;
 447                         regulator-boot-on;
 448                         regulator-always-on;
 449                 };
 450
 451                 power-button {
 452                         compatible = "ti,tps65218-pwrbutton";
 453                         status = "okay";
 454                         interrupts = <3 IRQ_TYPE_EDGE_BOTH>;
 455                 };
 456         };
 457
 458         at24@50 {
 459                 compatible = "at24,24c256";
 460                 pagesize = <64>;
 461                 reg = <0x50>;
 462         };
 463 };
 464
 465 &i2c1 {
 466         status = "okay";
 467         pinctrl-names = "default";
 468         pinctrl-0 = <&i2c1_pins>;
 469         clock-frequency = <400000>;
 470
 471         edt-ft5306@38 {
 472                 status = "okay";
 473                 compatible = "edt,edt-ft5306", "edt,edt-ft5x06";
 474                 pinctrl-names = "default";
 475                 pinctrl-0 = <&edt_ft5306_ts_pins>;
 476
 477                 reg = <0x38>;
 478                 interrupt-parent = <&gpio0>;
 479                 interrupts = <31 0>;
 480
 481                 reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
 482
 483                 touchscreen-size-x = <480>;
 484                 touchscreen-size-y = <272>;
 485         };
 486
 487         tlv320aic3106: tlv320aic3106@1b {
 488                 compatible = "ti,tlv320aic3106";
 489                 reg = <0x1b>;
 490                 status = "okay";
 491
 492                 /* Regulators */
 493                 AVDD-supply = <&dcdc4>;
 494                 IOVDD-supply = <&dcdc4>;
 495                 DRVDD-supply = <&dcdc4>;
 496                 DVDD-supply = <&ldo1>;
 497         };
 498
 499         lis331dlh@18 {
 500                 compatible = "st,lis331dlh";
 501                 reg = <0x18>;
 502                 status = "okay";
 503
 504                 Vdd-supply = <&dcdc4>;
 505                 Vdd_IO-supply = <&dcdc4>;
 506                 interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>;
 507         };
 508 };
 509
 510 &epwmss0 {
 511         status = "okay";
 512 };
 513
 514 &ecap0 {
 515         status = "okay";
 516         pinctrl-names = "default";
 517         pinctrl-0 = <&ecap0_pins>;
 518 };
 519
 520 &gpio0 {
 521         status = "okay";
 522 };
 523
 524 &gpio1 {
 525         status = "okay";
 526 };
 527
 528 &gpio5 {
 529         status = "okay";
 530 };
 531
 532 &mmc1 {
 533         status = "okay";
 534         pinctrl-names = "default";
 535         pinctrl-0 = <&mmc1_pins>;
 536
 537         vmmc-supply = <&dcdc4>;
 538         bus-width = <4>;
 539         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 540 };
 541
 542 &usb2_phy1 {
 543         status = "okay";
 544 };
 545
 546 &usb1 {
 547         dr_mode = "peripheral";
 548         status = "okay";
 549         pinctrl-names = "default";
 550         pinctrl-0 = <&usb1_pins>;
 551 };
 552
 553 &usb2_phy2 {
 554         status = "okay";
 555 };
 556
 557 &usb2 {
 558         dr_mode = "host";
 559         status = "okay";
 560         pinctrl-names = "default";
 561         pinctrl-0 = <&usb2_pins>;
 562 };
 563
 564 &qspi {
 565         status = "okay";
 566         pinctrl-names = "default";
 567         pinctrl-0 = <&qspi_pins>;
 568
 569         spi-max-frequency = <48000000>;
 570         m25p80@0 {
 571                 compatible = "mx66l51235l","spi-flash";
 572                 spi-max-frequency = <48000000>;
 573                 reg = <0>;
 574                 spi-cpol;
 575                 spi-cpha;
 576                 spi-tx-bus-width = <1>;
 577                 spi-rx-bus-width = <4>;
 578                 #address-cells = <1>;
 579                 #size-cells = <1>;
 580
 581                 /* MTD partition table.
 582                  * The ROM checks the first 512KiB
 583                  * for a valid file to boot(XIP).
 584                  */
 585                 partition@0 {
 586                         label = "QSPI.U_BOOT";
 587                         reg = <0x00000000 0x000080000>;
 588                 };
 589                 partition@1 {
 590                         label = "QSPI.U_BOOT.backup";
 591                         reg = <0x00080000 0x00080000>;
 592                 };
 593                 partition@2 {
 594                         label = "QSPI.U-BOOT-SPL_OS";
 595                         reg = <0x00100000 0x00010000>;
 596                 };
 597                 partition@3 {
 598                         label = "QSPI.U_BOOT_ENV";
 599                         reg = <0x00110000 0x00010000>;
 600                 };
 601                 partition@4 {
 602                         label = "QSPI.U-BOOT-ENV.backup";
 603                         reg = <0x00120000 0x00010000>;
 604                 };
 605                 partition@5 {
 606                         label = "QSPI.KERNEL";
 607                         reg = <0x00130000 0x0800000>;
 608                 };
 609                 partition@6 {
 610                         label = "QSPI.FILESYSTEM";
 611                         reg = <0x00930000 0x36D0000>;
 612                 };
 613         };
 614 };
 615
 616 &mac {
 617         pinctrl-names = "default", "sleep";
 618         pinctrl-0 = <&cpsw_default>;
 619         pinctrl-1 = <&cpsw_sleep>;
 620         dual_emac = <1>;
 621         status = "okay";
 622 };
 623
 624 &davinci_mdio {
 625         pinctrl-names = "default", "sleep";
 626         pinctrl-0 = <&davinci_mdio_default>;
 627         pinctrl-1 = <&davinci_mdio_sleep>;
 628         status = "okay";
 629 };
 630
 631 &cpsw_emac0 {
 632         phy_id = <&davinci_mdio>, <4>;
 633         phy-mode = "rgmii";
 634         dual_emac_res_vlan = <1>;
 635 };
 636
 637 &cpsw_emac1 {
 638         phy_id = <&davinci_mdio>, <5>;
 639         phy-mode = "rgmii";
 640         dual_emac_res_vlan = <2>;
 641 };
 642
 643 &elm {
 644         status = "okay";
 645 };
 646
 647 &mcasp1 {
 648         pinctrl-names = "default";
 649         pinctrl-0 = <&mcasp1_pins>;
 650
 651         status = "okay";
 652
 653         op-mode = <0>;
 654         tdm-slots = <2>;
 655         serial-dir = <
 656                 0 0 1 2
 657         >;
 658
 659         tx-num-evt = <1>;
 660         rx-num-evt = <1>;
 661 };
 662
 663 &dss {
 664         status = "okay";
 665
 666         pinctrl-names = "default";
 667         pinctrl-0 = <&dss_pins>;
 668
 669         port {
 670                 dpi_out: endpoint@0 {
 671                         remote-endpoint = <&lcd_in>;
 672                         data-lines = <24>;
 673                 };
 674         };
 675 };
 676
 677 &rtc {
 678         status = "okay";
 679 };
 680
 681 &wdt {
 682         status = "okay";
 683 };
 684
 685 &cpu {
 686         cpu0-supply = <&dcdc2>;
 687 };
 688
 689 &vpfe0 {
 690         status = "okay";
 691         pinctrl-names = "default", "sleep";
 692         pinctrl-0 = <&vpfe0_pins_default>;
 693         pinctrl-1 = <&vpfe0_pins_sleep>;
 694
 695         /* Camera port */
 696         port {
 697                 vpfe0_ep: endpoint {
 698                         /* remote-endpoint = <&sensor>; add once we have it */
 699                         ti,am437x-vpfe-interface = <0>;
 700                         bus-width = <8>;
 701                         hsync-active = <0>;
 702                         vsync-active = <0>;
 703                 };
 704         };
 705 };