arch/arm/dts/am437x-gp-evm.dts

   1 /*
   2  * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8
   9 /* AM437x GP EVM */
  10
  11 /dts-v1/;
  12
  13 #include "am4372.dtsi"
  14 #include <dt-bindings/pinctrl/am43xx.h>
  15 #include <dt-bindings/pwm/pwm.h>
  16 #include <dt-bindings/gpio/gpio.h>
  17
  18 / {
  19         model = "TI AM437x GP EVM";
  20         compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
  21
  22         aliases {
  23                 display0 = &lcd0;
  24                 serial3 = &uart3;
  25         };
  26
  27         chosen {
  28                 stdout-path = &uart0;
  29         };
  30
  31         vmmcsd_fixed: fixedregulator-sd {
  32                 compatible = "regulator-fixed";
  33                 regulator-name = "vmmcsd_fixed";
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36                 enable-active-high;
  37         };
  38
  39         vtt_fixed: fixedregulator-vtt {
  40                 compatible = "regulator-fixed";
  41                 regulator-name = "vtt_fixed";
  42                 regulator-min-microvolt = <1500000>;
  43                 regulator-max-microvolt = <1500000>;
  44                 regulator-always-on;
  45                 regulator-boot-on;
  46                 enable-active-high;
  47                 gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
  48         };
  49
  50         vmmcwl_fixed: fixedregulator-mmcwl {
  51                 compatible = "regulator-fixed";
  52                 regulator-name = "vmmcwl_fixed";
  53                 regulator-min-microvolt = <1800000>;
  54                 regulator-max-microvolt = <1800000>;
  55                 gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
  56                 enable-active-high;
  57         };
  58
  59         backlight {
  60                 compatible = "pwm-backlight";
  61                 pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
  62                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
  63                 default-brightness-level = <8>;
  64         };
  65
  66         matrix_keypad: matrix_keypad@0 {
  67                 compatible = "gpio-matrix-keypad";
  68                 debounce-delay-ms = <5>;
  69                 col-scan-delay-us = <2>;
  70
  71                 row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
  72                                 &gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
  73                                 &gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
  74
  75                 col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
  76                                 &gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
  77
  78                 linux,keymap = <0x00000201      /* P1 */
  79                                 0x00010202      /* P2 */
  80                                 0x01000067      /* UP */
  81                                 0x0101006a      /* RIGHT */
  82                                 0x02000069      /* LEFT */
  83                                 0x0201006c>;      /* DOWN */
  84                 };
  85
  86         lcd0: display {
  87                 compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
  88                 label = "lcd";
  89
  90                 pinctrl-names = "default";
  91                 pinctrl-0 = <&lcd_pins>;
  92
  93                 /*
  94                  * SelLCDorHDMI, LOW to select HDMI. This is not really the
  95                  * panel's enable GPIO, but we don't have HDMI driver support nor
  96                  * support to switch between two displays, so using this gpio as
  97                  * panel's enable should be safe.
  98                  */
  99                 enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
 100
 101                 panel-timing {
 102                         clock-frequency = <33000000>;
 103                         hactive = <800>;
 104                         vactive = <480>;
 105                         hfront-porch = <210>;
 106                         hback-porch = <16>;
 107                         hsync-len = <30>;
 108                         vback-porch = <10>;
 109                         vfront-porch = <22>;
 110                         vsync-len = <13>;
 111                         hsync-active = <0>;
 112                         vsync-active = <0>;
 113                         de-active = <1>;
 114                         pixelclk-active = <1>;
 115                 };
 116
 117                 port {
 118                         lcd_in: endpoint {
 119                                 remote-endpoint = <&dpi_out>;
 120                         };
 121                 };
 122         };
 123
 124         /* fixed 12MHz oscillator */
 125         refclk: oscillator {
 126                 #clock-cells = <0>;
 127                 compatible = "fixed-clock";
 128                 clock-frequency = <12000000>;
 129         };
 130
 131 };
 132
 133 &am43xx_pinmux {
 134         pinctrl-names = "default", "sleep";
 135         pinctrl-0 = <&wlan_pins_default>;
 136         pinctrl-1 = <&wlan_pins_sleep>;
 137
 138         i2c0_pins: i2c0_pins {
 139                 pinctrl-single,pins = <
 140                         0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
 141                         0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
 142                 >;
 143         };
 144
 145         i2c1_pins: i2c1_pins {
 146                 pinctrl-single,pins = <
 147                         0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
 148                         0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
 149                 >;
 150         };
 151
 152         mmc1_pins: pinmux_mmc1_pins {
 153                 pinctrl-single,pins = <
 154                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 155                 >;
 156         };
 157
 158         ecap0_pins: backlight_pins {
 159                 pinctrl-single,pins = <
 160                         0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 161                 >;
 162         };
 163
 164         pixcir_ts_pins: pixcir_ts_pins {
 165                 pinctrl-single,pins = <
 166                         0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
 167                 >;
 168         };
 169
 170         cpsw_default: cpsw_default {
 171                 pinctrl-single,pins = <
 172                         /* Slave 1 */
 173                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
 174                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rxctl */
 175                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
 176                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
 177                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
 178                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
 179                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
 180                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rmii1_rclk */
 181                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rxd3 */
 182                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rxd2 */
 183                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rxd1 */
 184                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rxd0 */
 185                 >;
 186         };
 187
 188         cpsw_sleep: cpsw_sleep {
 189                 pinctrl-single,pins = <
 190                         /* Slave 1 reset value */
 191                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 192                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 193                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 194                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 195                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 196                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 197                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 198                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 199                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 200                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 201                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 202                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 203                 >;
 204         };
 205
 206         davinci_mdio_default: davinci_mdio_default {
 207                 pinctrl-single,pins = <
 208                         /* MDIO */
 209                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 210                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 211                 >;
 212         };
 213
 214         davinci_mdio_sleep: davinci_mdio_sleep {
 215                 pinctrl-single,pins = <
 216                         /* MDIO reset value */
 217                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 218                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 219                 >;
 220         };
 221
 222         nand_flash_x8: nand_flash_x8 {
 223                 pinctrl-single,pins = <
 224                         0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* spi2_cs0.gpio/eMMCorNANDsel */
 225                         0x0  (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad0.gpmc_ad0 */
 226                         0x4  (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad1.gpmc_ad1 */
 227                         0x8  (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad2.gpmc_ad2 */
 228                         0xc  (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad3.gpmc_ad3 */
 229                         0x10 (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad4.gpmc_ad4 */
 230                         0x14 (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad5.gpmc_ad5 */
 231                         0x18 (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad6.gpmc_ad6 */
 232                         0x1c (PIN_INPUT  | MUX_MODE0)   /* gpmc_ad7.gpmc_ad7 */
 233                         0x70 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_wait0.gpmc_wait0 */
 234                         0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_wpn.gpmc_wpn */
 235                         0x7c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn0.gpmc_csn0  */
 236                         0x90 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_advn_ale.gpmc_advn_ale */
 237                         0x94 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_oen_ren.gpmc_oen_ren */
 238                         0x98 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_wen.gpmc_wen */
 239                         0x9c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_be0n_cle.gpmc_be0n_cle */
 240                 >;
 241         };
 242
 243         dss_pins: dss_pins {
 244                 pinctrl-single,pins = <
 245                         0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
 246                         0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 247                         0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 248                         0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
 249                         0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 250                         0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 251                         0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
 252                         0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
 253                         0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
 254                         0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 255                         0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 256                         0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
 257                         0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 258                         0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 259                         0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 260                         0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
 261                         0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 262                         0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 263                         0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 264                         0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
 265                         0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 266                         0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 267                         0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
 268                         0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
 269                         0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
 270                         0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
 271                         0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
 272                         0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
 273
 274                 >;
 275         };
 276
 277         lcd_pins: lcd_pins {
 278                 pinctrl-single,pins = <
 279                         /* GPIO 5_8 to select LCD / HDMI */
 280                         0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
 281                 >;
 282         };
 283
 284         dcan0_default: dcan0_default_pins {
 285                 pinctrl-single,pins = <
 286                         0x178 (PIN_OUTPUT | MUX_MODE2)          /* uart1_ctsn.d_can0_tx */
 287                         0x17c (PIN_INPUT_PULLUP | MUX_MODE2)    /* uart1_rtsn.d_can0_rx */
 288                 >;
 289         };
 290
 291         dcan1_default: dcan1_default_pins {
 292                 pinctrl-single,pins = <
 293                         0x180 (PIN_OUTPUT | MUX_MODE2)          /* uart1_rxd.d_can1_tx */
 294                         0x184 (PIN_INPUT_PULLUP | MUX_MODE2)    /* uart1_txd.d_can1_rx */
 295                 >;
 296         };
 297
 298         vpfe0_pins_default: vpfe0_pins_default {
 299                 pinctrl-single,pins = <
 300                         0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
 301                         0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
 302                         0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
 303                         0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
 304                         0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
 305                         0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
 306                         0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
 307                         0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
 308                         0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
 309                         0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
 310                         0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
 311                         0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
 312                         0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
 313                 >;
 314         };
 315
 316         vpfe0_pins_sleep: vpfe0_pins_sleep {
 317                 pinctrl-single,pins = <
 318                         0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
 319                         0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
 320                         0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
 321                         0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
 322                         0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
 323                         0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
 324                         0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
 325                         0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
 326                         0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
 327                         0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
 328                         0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
 329                         0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
 330                         0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
 331                 >;
 332         };
 333
 334         vpfe1_pins_default: vpfe1_pins_default {
 335                 pinctrl-single,pins = <
 336                         0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
 337                         0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
 338                         0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
 339                         0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
 340                         0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
 341                         0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
 342                         0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
 343                         0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
 344                         0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
 345                         0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
 346                         0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
 347                         0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
 348                         0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
 349                 >;
 350         };
 351
 352         vpfe1_pins_sleep: vpfe1_pins_sleep {
 353                 pinctrl-single,pins = <
 354                         0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
 355                         0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
 356                         0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
 357                         0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
 358                         0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
 359                         0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
 360                         0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
 361                         0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
 362                         0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
 363                         0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
 364                         0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
 365                         0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
 366                         0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
 367                 >;
 368         };
 369
 370         mmc3_pins_default: pinmux_mmc3_pins_default {
 371                 pinctrl-single,pins = <
 372                         0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
 373                         0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
 374                         0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
 375                         0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
 376                         0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
 377                         0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
 378                 >;
 379         };
 380
 381         mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
 382                 pinctrl-single,pins = <
 383                         0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_clk.mmc2_clk */
 384                         0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_csn3.mmc2_cmd */
 385                         0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a1.mmc2_dat0 */
 386                         0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a2.mmc2_dat1 */
 387                         0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a3.mmc2_dat2 */
 388                         0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_be1n.mmc2_dat3 */
 389                 >;
 390         };
 391
 392         wlan_pins_default: pinmux_wlan_pins_default {
 393                 pinctrl-single,pins = <
 394                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)          /* gpmc_a4.gpio1_20 WL_EN */
 395                         0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)    /* gpmc_a7.gpio1_23 WL_IRQ*/
 396                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)          /* gpmc_a0.gpio1_16 BT_EN*/
 397                 >;
 398         };
 399
 400         wlan_pins_sleep: pinmux_wlan_pins_sleep {
 401                 pinctrl-single,pins = <
 402                         0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)          /* gpmc_a4.gpio1_20 WL_EN */
 403                         0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)    /* gpmc_a7.gpio1_23 WL_IRQ*/
 404                         0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)            /* gpmc_a0.gpio1_16 BT_EN*/
 405                 >;
 406         };
 407
 408         uart3_pins: uart3_pins {
 409                 pinctrl-single,pins = <
 410                         0x228 (PIN_INPUT | MUX_MODE0)           /* uart3_rxd.uart3_rxd */
 411                         0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
 412                         0x230 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart3_ctsn.uart3_ctsn */
 413                         0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
 414                 >;
 415         };
 416 };
 417
 418 &i2c0 {
 419         status = "okay";
 420         pinctrl-names = "default";
 421         pinctrl-0 = <&i2c0_pins>;
 422         clock-frequency = <100000>;
 423
 424         tps65218: tps65218@24 {
 425                 reg = <0x24>;
 426                 compatible = "ti,tps65218";
 427                 interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
 428                 interrupt-controller;
 429                 #interrupt-cells = <2>;
 430
 431                 dcdc1: regulator-dcdc1 {
 432                         compatible = "ti,tps65218-dcdc1";
 433                         regulator-name = "vdd_core";
 434                         regulator-min-microvolt = <912000>;
 435                         regulator-max-microvolt = <1144000>;
 436                         regulator-boot-on;
 437                         regulator-always-on;
 438                 };
 439
 440                 dcdc2: regulator-dcdc2 {
 441                         compatible = "ti,tps65218-dcdc2";
 442                         regulator-name = "vdd_mpu";
 443                         regulator-min-microvolt = <912000>;
 444                         regulator-max-microvolt = <1378000>;
 445                         regulator-boot-on;
 446                         regulator-always-on;
 447                 };
 448
 449                 dcdc3: regulator-dcdc3 {
 450                         compatible = "ti,tps65218-dcdc3";
 451                         regulator-name = "vdcdc3";
 452                         regulator-min-microvolt = <1500000>;
 453                         regulator-max-microvolt = <1500000>;
 454                         regulator-boot-on;
 455                         regulator-always-on;
 456                 };
 457                 dcdc5: regulator-dcdc5 {
 458                         compatible = "ti,tps65218-dcdc5";
 459                         regulator-name = "v1_0bat";
 460                         regulator-min-microvolt = <1000000>;
 461                         regulator-max-microvolt = <1000000>;
 462                 };
 463
 464                 dcdc6: regulator-dcdc6 {
 465                         compatible = "ti,tps65218-dcdc6";
 466                         regulator-name = "v1_8bat";
 467                         regulator-min-microvolt = <1800000>;
 468                         regulator-max-microvolt = <1800000>;
 469                 };
 470
 471                 ldo1: regulator-ldo1 {
 472                         compatible = "ti,tps65218-ldo1";
 473                         regulator-min-microvolt = <1800000>;
 474                         regulator-max-microvolt = <1800000>;
 475                         regulator-boot-on;
 476                         regulator-always-on;
 477                 };
 478         };
 479
 480         ov2659@30 {
 481                 compatible = "ovti,ov2659";
 482                 reg = <0x30>;
 483
 484                 clocks = <&refclk 0>;
 485                 clock-names = "xvclk";
 486
 487                 port {
 488                         ov2659_0: endpoint {
 489                                 remote-endpoint = <&vpfe1_ep>;
 490                                 link-frequencies = /bits/ 64 <70000000>;
 491                         };
 492                 };
 493         };
 494 };
 495
 496 &i2c1 {
 497         status = "okay";
 498         pinctrl-names = "default";
 499         pinctrl-0 = <&i2c1_pins>;
 500         pixcir_ts@5c {
 501                 compatible = "pixcir,pixcir_tangoc";
 502                 pinctrl-names = "default";
 503                 pinctrl-0 = <&pixcir_ts_pins>;
 504                 reg = <0x5c>;
 505                 interrupt-parent = <&gpio3>;
 506                 interrupts = <22 0>;
 507
 508                 attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
 509
 510                 touchscreen-size-x = <1024>;
 511                 touchscreen-size-y = <600>;
 512         };
 513
 514         ov2659@30 {
 515                 compatible = "ovti,ov2659";
 516                 reg = <0x30>;
 517
 518                 clocks = <&refclk 0>;
 519                 clock-names = "xvclk";
 520
 521                 port {
 522                         ov2659_1: endpoint {
 523                                 remote-endpoint = <&vpfe0_ep>;
 524                                 link-frequencies = /bits/ 64 <70000000>;
 525                         };
 526                 };
 527         };
 528 };
 529
 530 &epwmss0 {
 531         status = "okay";
 532 };
 533
 534 &tscadc {
 535         status = "okay";
 536
 537         adc {
 538                 ti,adc-channels = <0 1 2 3 4 5 6 7>;
 539         };
 540 };
 541
 542 &ecap0 {
 543         status = "okay";
 544         pinctrl-names = "default";
 545         pinctrl-0 = <&ecap0_pins>;
 546 };
 547
 548 &gpio0 {
 549         status = "okay";
 550 };
 551
 552 &gpio1 {
 553         status = "okay";
 554 };
 555
 556 &gpio3 {
 557         status = "okay";
 558 };
 559
 560 &gpio4 {
 561         status = "okay";
 562 };
 563
 564 &gpio5 {
 565         status = "okay";
 566         ti,no-reset-on-init;
 567 };
 568
 569 &mmc1 {
 570         status = "okay";
 571         vmmc-supply = <&vmmcsd_fixed>;
 572         bus-width = <4>;
 573         pinctrl-names = "default";
 574         pinctrl-0 = <&mmc1_pins>;
 575         cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 576 };
 577
 578 &mmc3 {
 579         /* disable MMC3 as SDIO is not supported in U-Boot */
 580         status = "disabled";
 581         /* these are on the crossbar and are outlined in the
 582            xbar-event-map element */
 583         dmas = <&edma 30
 584                 &edma 31>;
 585         dma-names = "tx", "rx";
 586         vmmc-supply = <&vmmcwl_fixed>;
 587         bus-width = <4>;
 588         pinctrl-names = "default", "sleep";
 589         pinctrl-0 = <&mmc3_pins_default>;
 590         pinctrl-1 = <&mmc3_pins_sleep>;
 591         cap-power-off-card;
 592         keep-power-in-suspend;
 593         ti,non-removable;
 594
 595         #address-cells = <1>;
 596         #size-cells = <0>;
 597         wlcore: wlcore@0 {
 598                 compatible = "ti,wl1835";
 599                 reg = <2>;
 600                 interrupt-parent = <&gpio1>;
 601                 interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
 602         };
 603 };
 604
 605 &edma {
 606         ti,edma-xbar-event-map = /bits/ 16 <1 30
 607                                             2 31>;
 608 };
 609
 610 &uart3 {
 611         status = "okay";
 612         pinctrl-names = "default";
 613         pinctrl-0 = <&uart3_pins>;
 614 };
 615
 616 &usb2_phy1 {
 617         status = "okay";
 618 };
 619
 620 &usb1 {
 621         dr_mode = "peripheral";
 622         status = "okay";
 623 };
 624
 625 &usb2_phy2 {
 626         status = "okay";
 627 };
 628
 629 &usb2 {
 630         dr_mode = "host";
 631         status = "okay";
 632 };
 633
 634 &mac {
 635         slaves = <1>;
 636         pinctrl-names = "default", "sleep";
 637         pinctrl-0 = <&cpsw_default>;
 638         pinctrl-1 = <&cpsw_sleep>;
 639         status = "okay";
 640 };
 641
 642 &davinci_mdio {
 643         pinctrl-names = "default", "sleep";
 644         pinctrl-0 = <&davinci_mdio_default>;
 645         pinctrl-1 = <&davinci_mdio_sleep>;
 646         status = "okay";
 647 };
 648
 649 &cpsw_emac0 {
 650         phy_id = <&davinci_mdio>, <0>;
 651         phy-mode = "rgmii";
 652 };
 653
 654 &elm {
 655         status = "okay";
 656 };
 657
 658 &gpmc {
 659         status = "okay";
 660         pinctrl-names = "default";
 661         pinctrl-0 = <&nand_flash_x8>;
 662         ranges = <0 0 0 0x01000000>;    /* minimum GPMC partition = 16MB */
 663         nand@0,0 {
 664                 reg = <0 0 4>;          /* device IO registers */
 665                 ti,nand-ecc-opt = "bch16";
 666                 ti,elm-id = <&elm>;
 667                 nand-bus-width = <8>;
 668                 gpmc,device-width = <1>;
 669                 gpmc,sync-clk-ps = <0>;
 670                 gpmc,cs-on-ns = <0>;
 671                 gpmc,cs-rd-off-ns = <40>;
 672                 gpmc,cs-wr-off-ns = <40>;
 673                 gpmc,adv-on-ns = <0>;
 674                 gpmc,adv-rd-off-ns = <25>;
 675                 gpmc,adv-wr-off-ns = <25>;
 676                 gpmc,we-on-ns = <0>;
 677                 gpmc,we-off-ns = <20>;
 678                 gpmc,oe-on-ns = <3>;
 679                 gpmc,oe-off-ns = <30>;
 680                 gpmc,access-ns = <30>;
 681                 gpmc,rd-cycle-ns = <40>;
 682                 gpmc,wr-cycle-ns = <40>;
 683                 gpmc,wait-pin = <0>;
 684                 gpmc,bus-turnaround-ns = <0>;
 685                 gpmc,cycle2cycle-delay-ns = <0>;
 686                 gpmc,clk-activation-ns = <0>;
 687                 gpmc,wait-monitoring-ns = <0>;
 688                 gpmc,wr-access-ns = <40>;
 689                 gpmc,wr-data-mux-bus-ns = <0>;
 690                 /* MTD partition table */
 691                 /* All SPL-* partitions are sized to minimal length
 692                  * which can be independently programmable. For
 693                  * NAND flash this is equal to size of erase-block */
 694                 #address-cells = <1>;
 695                 #size-cells = <1>;
 696                 partition@0 {
 697                         label = "NAND.SPL";
 698                         reg = <0x00000000 0x00040000>;
 699                 };
 700                 partition@1 {
 701                         label = "NAND.SPL.backup1";
 702                         reg = <0x00040000 0x00040000>;
 703                 };
 704                 partition@2 {
 705                         label = "NAND.SPL.backup2";
 706                         reg = <0x00080000 0x00040000>;
 707                 };
 708                 partition@3 {
 709                         label = "NAND.SPL.backup3";
 710                         reg = <0x000c0000 0x00040000>;
 711                 };
 712                 partition@4 {
 713                         label = "NAND.u-boot-spl-os";
 714                         reg = <0x00100000 0x00080000>;
 715                 };
 716                 partition@5 {
 717                         label = "NAND.u-boot";
 718                         reg = <0x00180000 0x00100000>;
 719                 };
 720                 partition@6 {
 721                         label = "NAND.u-boot-env";
 722                         reg = <0x00280000 0x00040000>;
 723                 };
 724                 partition@7 {
 725                         label = "NAND.u-boot-env.backup1";
 726                         reg = <0x002c0000 0x00040000>;
 727                 };
 728                 partition@8 {
 729                         label = "NAND.kernel";
 730                         reg = <0x00300000 0x00700000>;
 731                 };
 732                 partition@9 {
 733                         label = "NAND.file-system";
 734                         reg = <0x00a00000 0x1f600000>;
 735                 };
 736         };
 737 };
 738
 739 &dss {
 740         status = "ok";
 741
 742         pinctrl-names = "default";
 743         pinctrl-0 = <&dss_pins>;
 744
 745         port {
 746                 dpi_out: endpoint@0 {
 747                         remote-endpoint = <&lcd_in>;
 748                         data-lines = <24>;
 749                 };
 750         };
 751 };
 752
 753 &dcan0 {
 754         pinctrl-names = "default";
 755         pinctrl-0 = <&dcan0_default>;
 756         status = "okay";
 757 };
 758
 759 &dcan1 {
 760         pinctrl-names = "default";
 761         pinctrl-0 = <&dcan1_default>;
 762         status = "okay";
 763 };
 764
 765 &vpfe0 {
 766         status = "okay";
 767         pinctrl-names = "default", "sleep";
 768         pinctrl-0 = <&vpfe0_pins_default>;
 769         pinctrl-1 = <&vpfe0_pins_sleep>;
 770
 771         port {
 772                 vpfe0_ep: endpoint {
 773                         remote-endpoint = <&ov2659_1>;
 774                         ti,am437x-vpfe-interface = <0>;
 775                         bus-width = <8>;
 776                         hsync-active = <0>;
 777                         vsync-active = <0>;
 778                 };
 779         };
 780 };
 781
 782 &vpfe1 {
 783         status = "okay";
 784         pinctrl-names = "default", "sleep";
 785         pinctrl-0 = <&vpfe1_pins_default>;
 786         pinctrl-1 = <&vpfe1_pins_sleep>;
 787
 788         port {
 789                 vpfe1_ep: endpoint {
 790                         remote-endpoint = <&ov2659_0>;
 791                         ti,am437x-vpfe-interface = <0>;
 792                         bus-width = <8>;
 793                         hsync-active = <0>;
 794                         vsync-active = <0>;
 795                 };
 796         };
 797 };