arch/arm/dts/am335x-evm.dts

   1 /*
   2  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
   3  *
   4  * This program is free software; you can redistribute it and/or modify
   5  * it under the terms of the GNU General Public License version 2 as
   6  * published by the Free Software Foundation.
   7  */
   8 /dts-v1/;
   9
  10 #include "am33xx.dtsi"
  11 #include <dt-bindings/interrupt-controller/irq.h>
  12
  13 / {
  14         model = "TI AM335x EVM";
  15         compatible = "ti,am335x-evm", "ti,am33xx";
  16
  17         chosen {
  18                 stdout-path = &uart0;
  19                 tick-timer = &timer2;
  20         };
  21
  22         cpus {
  23                 cpu@0 {
  24                         cpu0-supply = <&vdd1_reg>;
  25                 };
  26         };
  27
  28         memory {
  29                 device_type = "memory";
  30                 reg = <0x80000000 0x10000000>; /* 256 MB */
  31         };
  32
  33         vbat: fixedregulator@0 {
  34                 compatible = "regulator-fixed";
  35                 regulator-name = "vbat";
  36                 regulator-min-microvolt = <5000000>;
  37                 regulator-max-microvolt = <5000000>;
  38                 regulator-boot-on;
  39         };
  40
  41         lis3_reg: fixedregulator@1 {
  42                 compatible = "regulator-fixed";
  43                 regulator-name = "lis3_reg";
  44                 regulator-boot-on;
  45         };
  46
  47         wlan_en_reg: fixedregulator@2 {
  48                 compatible = "regulator-fixed";
  49                 regulator-name = "wlan-en-regulator";
  50                 regulator-min-microvolt = <1800000>;
  51                 regulator-max-microvolt = <1800000>;
  52
  53                 /* WLAN_EN GPIO for this board - Bank1, pin16 */
  54                 gpio = <&gpio1 16 0>;
  55
  56                 /* WLAN card specific delay */
  57                 startup-delay-us = <70000>;
  58                 enable-active-high;
  59         };
  60
  61         matrix_keypad: matrix_keypad@0 {
  62                 compatible = "gpio-matrix-keypad";
  63                 debounce-delay-ms = <5>;
  64                 col-scan-delay-us = <2>;
  65
  66                 row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH         /* Bank1, pin25 */
  67                              &gpio1 26 GPIO_ACTIVE_HIGH         /* Bank1, pin26 */
  68                              &gpio1 27 GPIO_ACTIVE_HIGH>;       /* Bank1, pin27 */
  69
  70                 col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH         /* Bank1, pin21 */
  71                              &gpio1 22 GPIO_ACTIVE_HIGH>;       /* Bank1, pin22 */
  72
  73                 linux,keymap = <0x0000008b      /* MENU */
  74                                 0x0100009e      /* BACK */
  75                                 0x02000069      /* LEFT */
  76                                 0x0001006a      /* RIGHT */
  77                                 0x0101001c      /* ENTER */
  78                                 0x0201006c>;    /* DOWN */
  79         };
  80
  81         gpio_keys: volume_keys@0 {
  82                 compatible = "gpio-keys";
  83                 autorepeat;
  84
  85                 switch@9 {
  86                         label = "volume-up";
  87                         linux,code = <115>;
  88                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  89                         gpio-key,wakeup;
  90                 };
  91
  92                 switch@10 {
  93                         label = "volume-down";
  94                         linux,code = <114>;
  95                         gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
  96                         gpio-key,wakeup;
  97                 };
  98         };
  99
 100         backlight {
 101                 compatible = "pwm-backlight";
 102                 pwms = <&ecap0 0 50000 0>;
 103                 brightness-levels = <0 51 53 56 62 75 101 152 255>;
 104                 default-brightness-level = <8>;
 105         };
 106
 107         panel {
 108                 compatible = "ti,tilcdc,panel";
 109                 status = "okay";
 110                 pinctrl-names = "default";
 111                 pinctrl-0 = <&lcd_pins_s0>;
 112                 panel-info {
 113                         ac-bias           = <255>;
 114                         ac-bias-intrpt    = <0>;
 115                         dma-burst-sz      = <16>;
 116                         bpp               = <32>;
 117                         fdd               = <0x80>;
 118                         sync-edge         = <0>;
 119                         sync-ctrl         = <1>;
 120                         raster-order      = <0>;
 121                         fifo-th           = <0>;
 122                 };
 123
 124                 display-timings {
 125                         800x480p62 {
 126                                 clock-frequency = <30000000>;
 127                                 hactive = <800>;
 128                                 vactive = <480>;
 129                                 hfront-porch = <39>;
 130                                 hback-porch = <39>;
 131                                 hsync-len = <47>;
 132                                 vback-porch = <29>;
 133                                 vfront-porch = <13>;
 134                                 vsync-len = <2>;
 135                                 hsync-active = <1>;
 136                                 vsync-active = <1>;
 137                         };
 138                 };
 139         };
 140
 141         sound {
 142                 compatible = "ti,da830-evm-audio";
 143                 ti,model = "AM335x-EVM";
 144                 ti,audio-codec = <&tlv320aic3106>;
 145                 ti,mcasp-controller = <&mcasp1>;
 146                 ti,codec-clock-rate = <12000000>;
 147                 ti,audio-routing =
 148                         "Headphone Jack",       "HPLOUT",
 149                         "Headphone Jack",       "HPROUT",
 150                         "LINE1L",               "Line In",
 151                         "LINE1R",               "Line In";
 152         };
 153 };
 154
 155 &am33xx_pinmux {
 156         pinctrl-names = "default";
 157         pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
 158
 159         matrix_keypad_s0: matrix_keypad_s0 {
 160                 pinctrl-single,pins = <
 161                         0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
 162                         0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a6.gpio1_22 */
 163                         0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a9.gpio1_25 */
 164                         0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a10.gpio1_26 */
 165                         0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7)   /* gpmc_a11.gpio1_27 */
 166                 >;
 167         };
 168
 169         volume_keys_s0: volume_keys_s0 {
 170                 pinctrl-single,pins = <
 171                         0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)  /* spi0_sclk.gpio0_2 */
 172                         0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)  /* spi0_d0.gpio0_3 */
 173                 >;
 174         };
 175
 176         i2c0_pins: pinmux_i2c0_pins {
 177                 pinctrl-single,pins = <
 178                         0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
 179                         0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
 180                 >;
 181         };
 182
 183         i2c1_pins: pinmux_i2c1_pins {
 184                 pinctrl-single,pins = <
 185                         0x158 (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_d1.i2c1_sda */
 186                         0x15c (PIN_INPUT_PULLUP | MUX_MODE2)    /* spi0_cs0.i2c1_scl */
 187                 >;
 188         };
 189
 190         uart0_pins: pinmux_uart0_pins {
 191                 pinctrl-single,pins = <
 192                         0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
 193                         0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
 194                 >;
 195         };
 196
 197         uart1_pins: pinmux_uart1_pins {
 198                 pinctrl-single,pins = <
 199                         0x178 (PIN_INPUT | MUX_MODE0)           /* uart1_ctsn.uart1_ctsn */
 200                         0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
 201                         0x180 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart1_rxd.uart1_rxd */
 202                         0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
 203                 >;
 204         };
 205
 206         clkout2_pin: pinmux_clkout2_pin {
 207                 pinctrl-single,pins = <
 208                         0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
 209                 >;
 210         };
 211
 212         nandflash_pins_s0: nandflash_pins_s0 {
 213                 pinctrl-single,pins = <
 214                         0x0 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad0.gpmc_ad0 */
 215                         0x4 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad1.gpmc_ad1 */
 216                         0x8 (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad2.gpmc_ad2 */
 217                         0xc (PIN_INPUT_PULLUP | MUX_MODE0)      /* gpmc_ad3.gpmc_ad3 */
 218                         0x10 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad4.gpmc_ad4 */
 219                         0x14 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad5.gpmc_ad5 */
 220                         0x18 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad6.gpmc_ad6 */
 221                         0x1c (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_ad7.gpmc_ad7 */
 222                         0x70 (PIN_INPUT_PULLUP | MUX_MODE0)     /* gpmc_wait0.gpmc_wait0 */
 223                         0x74 (PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_wpn.gpio0_30 */
 224                         0x7c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_csn0.gpmc_csn0  */
 225                         0x90 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_advn_ale.gpmc_advn_ale */
 226                         0x94 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_oen_ren.gpmc_oen_ren */
 227                         0x98 (PIN_OUTPUT | MUX_MODE0)           /* gpmc_wen.gpmc_wen */
 228                         0x9c (PIN_OUTPUT | MUX_MODE0)           /* gpmc_be0n_cle.gpmc_be0n_cle */
 229                 >;
 230         };
 231
 232         ecap0_pins: backlight_pins {
 233                 pinctrl-single,pins = <
 234                         0x164 0x0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
 235                 >;
 236         };
 237
 238         cpsw_default: cpsw_default {
 239                 pinctrl-single,pins = <
 240                         /* Slave 1 */
 241                         0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
 242                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxdv.rgmii1_rctl */
 243                         0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
 244                         0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
 245                         0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
 246                         0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
 247                         0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
 248                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxclk.rgmii1_rclk */
 249                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd3.rgmii1_rd3 */
 250                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd2.rgmii1_rd2 */
 251                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd1.rgmii1_rd1 */
 252                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)  /* mii1_rxd0.rgmii1_rd0 */
 253                 >;
 254         };
 255
 256         cpsw_sleep: cpsw_sleep {
 257                 pinctrl-single,pins = <
 258                         /* Slave 1 reset value */
 259                         0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 260                         0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 261                         0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 262                         0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 263                         0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 264                         0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 265                         0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 266                         0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 267                         0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 268                         0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 269                         0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 270                         0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 271                 >;
 272         };
 273
 274         davinci_mdio_default: davinci_mdio_default {
 275                 pinctrl-single,pins = <
 276                         /* MDIO */
 277                         0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
 278                         0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
 279                 >;
 280         };
 281
 282         davinci_mdio_sleep: davinci_mdio_sleep {
 283                 pinctrl-single,pins = <
 284                         /* MDIO reset value */
 285                         0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
 286                         0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
 287                 >;
 288         };
 289
 290         mmc1_pins: pinmux_mmc1_pins {
 291                 pinctrl-single,pins = <
 292                         0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
 293                 >;
 294         };
 295
 296         mmc3_pins: pinmux_mmc3_pins {
 297                 pinctrl-single,pins = <
 298                         0x44 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
 299                         0x48 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
 300                         0x4C (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
 301                         0x78 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
 302                         0x88 (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
 303                         0x8C (PIN_INPUT_PULLUP | MUX_MODE3)     /* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
 304                 >;
 305         };
 306
 307         wlan_pins: pinmux_wlan_pins {
 308                 pinctrl-single,pins = <
 309                         0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a0.gpio1_16 */
 310                         0x19C (PIN_INPUT | MUX_MODE7)           /* mcasp0_ahclkr.gpio3_17 */
 311                         0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* mcasp0_ahclkx.gpio3_21 */
 312                 >;
 313         };
 314
 315         lcd_pins_s0: lcd_pins_s0 {
 316                 pinctrl-single,pins = <
 317                         0x20 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad8.lcd_data23 */
 318                         0x24 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad9.lcd_data22 */
 319                         0x28 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad10.lcd_data21 */
 320                         0x2c (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad11.lcd_data20 */
 321                         0x30 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad12.lcd_data19 */
 322                         0x34 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad13.lcd_data18 */
 323                         0x38 (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad14.lcd_data17 */
 324                         0x3c (PIN_OUTPUT | MUX_MODE1)           /* gpmc_ad15.lcd_data16 */
 325                         0xa0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data0.lcd_data0 */
 326                         0xa4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data1.lcd_data1 */
 327                         0xa8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data2.lcd_data2 */
 328                         0xac (PIN_OUTPUT | MUX_MODE0)           /* lcd_data3.lcd_data3 */
 329                         0xb0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data4.lcd_data4 */
 330                         0xb4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data5.lcd_data5 */
 331                         0xb8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data6.lcd_data6 */
 332                         0xbc (PIN_OUTPUT | MUX_MODE0)           /* lcd_data7.lcd_data7 */
 333                         0xc0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data8.lcd_data8 */
 334                         0xc4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data9.lcd_data9 */
 335                         0xc8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data10.lcd_data10 */
 336                         0xcc (PIN_OUTPUT | MUX_MODE0)           /* lcd_data11.lcd_data11 */
 337                         0xd0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data12.lcd_data12 */
 338                         0xd4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data13.lcd_data13 */
 339                         0xd8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_data14.lcd_data14 */
 340                         0xdc (PIN_OUTPUT | MUX_MODE0)           /* lcd_data15.lcd_data15 */
 341                         0xe0 (PIN_OUTPUT | MUX_MODE0)           /* lcd_vsync.lcd_vsync */
 342                         0xe4 (PIN_OUTPUT | MUX_MODE0)           /* lcd_hsync.lcd_hsync */
 343                         0xe8 (PIN_OUTPUT | MUX_MODE0)           /* lcd_pclk.lcd_pclk */
 344                         0xec (PIN_OUTPUT | MUX_MODE0)           /* lcd_ac_bias_en.lcd_ac_bias_en */
 345                 >;
 346         };
 347
 348         am335x_evm_audio_pins: am335x_evm_audio_pins {
 349                 pinctrl-single,pins = <
 350                         0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
 351                         0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
 352                         0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
 353                         0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
 354                 >;
 355         };
 356
 357         dcan1_pins_default: dcan1_pins_default {
 358                 pinctrl-single,pins = <
 359                         0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
 360                         0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
 361                 >;
 362         };
 363 };
 364
 365 &uart0 {
 366         pinctrl-names = "default";
 367         pinctrl-0 = <&uart0_pins>;
 368
 369         status = "okay";
 370 };
 371
 372 &uart1 {
 373         pinctrl-names = "default";
 374         pinctrl-0 = <&uart1_pins>;
 375
 376         status = "okay";
 377 };
 378
 379 &i2c0 {
 380         pinctrl-names = "default";
 381         pinctrl-0 = <&i2c0_pins>;
 382
 383         status = "okay";
 384         clock-frequency = <400000>;
 385
 386         tps: tps@2d {
 387                 reg = <0x2d>;
 388         };
 389 };
 390
 391 &usb {
 392         status = "okay";
 393 };
 394
 395 &usb_ctrl_mod {
 396         status = "okay";
 397 };
 398
 399 &usb0_phy {
 400         status = "okay";
 401 };
 402
 403 &usb1_phy {
 404         status = "okay";
 405 };
 406
 407 &usb0 {
 408         status = "okay";
 409 };
 410
 411 &usb1 {
 412         status = "okay";
 413         dr_mode = "host";
 414 };
 415
 416 &cppi41dma  {
 417         status = "okay";
 418 };
 419
 420 &i2c1 {
 421         pinctrl-names = "default";
 422         pinctrl-0 = <&i2c1_pins>;
 423
 424         status = "okay";
 425         clock-frequency = <100000>;
 426
 427         lis331dlh: lis331dlh@18 {
 428                 compatible = "st,lis331dlh", "st,lis3lv02d";
 429                 reg = <0x18>;
 430                 Vdd-supply = <&lis3_reg>;
 431                 Vdd_IO-supply = <&lis3_reg>;
 432
 433                 st,click-single-x;
 434                 st,click-single-y;
 435                 st,click-single-z;
 436                 st,click-thresh-x = <10>;
 437                 st,click-thresh-y = <10>;
 438                 st,click-thresh-z = <10>;
 439                 st,irq1-click;
 440                 st,irq2-click;
 441                 st,wakeup-x-lo;
 442                 st,wakeup-x-hi;
 443                 st,wakeup-y-lo;
 444                 st,wakeup-y-hi;
 445                 st,wakeup-z-lo;
 446                 st,wakeup-z-hi;
 447                 st,min-limit-x = <120>;
 448                 st,min-limit-y = <120>;
 449                 st,min-limit-z = <140>;
 450                 st,max-limit-x = <550>;
 451                 st,max-limit-y = <550>;
 452                 st,max-limit-z = <750>;
 453         };
 454
 455         tsl2550: tsl2550@39 {
 456                 compatible = "taos,tsl2550";
 457                 reg = <0x39>;
 458         };
 459
 460         tmp275: tmp275@48 {
 461                 compatible = "ti,tmp275";
 462                 reg = <0x48>;
 463         };
 464
 465         tlv320aic3106: tlv320aic3106@1b {
 466                 compatible = "ti,tlv320aic3106";
 467                 reg = <0x1b>;
 468                 status = "okay";
 469
 470                 /* Regulators */
 471                 AVDD-supply = <&vaux2_reg>;
 472                 IOVDD-supply = <&vaux2_reg>;
 473                 DRVDD-supply = <&vaux2_reg>;
 474                 DVDD-supply = <&vbat>;
 475         };
 476 };
 477
 478 &lcdc {
 479         status = "okay";
 480 };
 481
 482 &elm {
 483         status = "okay";
 484 };
 485
 486 &epwmss0 {
 487         status = "okay";
 488
 489         ecap0: ecap@48300100 {
 490                 status = "okay";
 491                 pinctrl-names = "default";
 492                 pinctrl-0 = <&ecap0_pins>;
 493         };
 494 };
 495
 496 &gpmc {
 497         status = "okay";
 498         pinctrl-names = "default";
 499         pinctrl-0 = <&nandflash_pins_s0>;
 500         ranges = <0 0 0x08000000 0x1000000>;    /* CS0: 16MB for NAND */
 501         nand@0,0 {
 502                 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
 503                 ti,nand-ecc-opt = "bch8";
 504                 ti,elm-id = <&elm>;
 505                 nand-bus-width = <8>;
 506                 gpmc,device-width = <1>;
 507                 gpmc,sync-clk-ps = <0>;
 508                 gpmc,cs-on-ns = <0>;
 509                 gpmc,cs-rd-off-ns = <44>;
 510                 gpmc,cs-wr-off-ns = <44>;
 511                 gpmc,adv-on-ns = <6>;
 512                 gpmc,adv-rd-off-ns = <34>;
 513                 gpmc,adv-wr-off-ns = <44>;
 514                 gpmc,we-on-ns = <0>;
 515                 gpmc,we-off-ns = <40>;
 516                 gpmc,oe-on-ns = <0>;
 517                 gpmc,oe-off-ns = <54>;
 518                 gpmc,access-ns = <64>;
 519                 gpmc,rd-cycle-ns = <82>;
 520                 gpmc,wr-cycle-ns = <82>;
 521                 gpmc,wait-on-read = "true";
 522                 gpmc,wait-on-write = "true";
 523                 gpmc,bus-turnaround-ns = <0>;
 524                 gpmc,cycle2cycle-delay-ns = <0>;
 525                 gpmc,clk-activation-ns = <0>;
 526                 gpmc,wait-monitoring-ns = <0>;
 527                 gpmc,wr-access-ns = <40>;
 528                 gpmc,wr-data-mux-bus-ns = <0>;
 529                 /* MTD partition table */
 530                 /* All SPL-* partitions are sized to minimal length
 531                  * which can be independently programmable. For
 532                  * NAND flash this is equal to size of erase-block */
 533                 #address-cells = <1>;
 534                 #size-cells = <1>;
 535                 partition@0 {
 536                         label = "NAND.SPL";
 537                         reg = <0x00000000 0x000020000>;
 538                 };
 539                 partition@1 {
 540                         label = "NAND.SPL.backup1";
 541                         reg = <0x00020000 0x00020000>;
 542                 };
 543                 partition@2 {
 544                         label = "NAND.SPL.backup2";
 545                         reg = <0x00040000 0x00020000>;
 546                 };
 547                 partition@3 {
 548                         label = "NAND.SPL.backup3";
 549                         reg = <0x00060000 0x00020000>;
 550                 };
 551                 partition@4 {
 552                         label = "NAND.u-boot-spl-os";
 553                         reg = <0x00080000 0x00040000>;
 554                 };
 555                 partition@5 {
 556                         label = "NAND.u-boot";
 557                         reg = <0x000C0000 0x00100000>;
 558                 };
 559                 partition@6 {
 560                         label = "NAND.u-boot-env";
 561                         reg = <0x001C0000 0x00020000>;
 562                 };
 563                 partition@7 {
 564                         label = "NAND.u-boot-env.backup1";
 565                         reg = <0x001E0000 0x00020000>;
 566                 };
 567                 partition@8 {
 568                         label = "NAND.kernel";
 569                         reg = <0x00200000 0x00800000>;
 570                 };
 571                 partition@9 {
 572                         label = "NAND.file-system";
 573                         reg = <0x00A00000 0x0F600000>;
 574                 };
 575         };
 576 };
 577
 578 #include "tps65910.dtsi"
 579
 580 &mcasp1 {
 581                 pinctrl-names = "default";
 582                 pinctrl-0 = <&am335x_evm_audio_pins>;
 583
 584                 status = "okay";
 585
 586                 op-mode = <0>;          /* MCASP_IIS_MODE */
 587                 tdm-slots = <2>;
 588                 /* 4 serializers */
 589                 serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 590                         0 0 1 2
 591                 >;
 592                 tx-num-evt = <32>;
 593                 rx-num-evt = <32>;
 594 };
 595
 596 &tps {
 597         vcc1-supply = <&vbat>;
 598         vcc2-supply = <&vbat>;
 599         vcc3-supply = <&vbat>;
 600         vcc4-supply = <&vbat>;
 601         vcc5-supply = <&vbat>;
 602         vcc6-supply = <&vbat>;
 603         vcc7-supply = <&vbat>;
 604         vccio-supply = <&vbat>;
 605
 606         regulators {
 607                 vrtc_reg: regulator@0 {
 608                         regulator-always-on;
 609                 };
 610
 611                 vio_reg: regulator@1 {
 612                         regulator-always-on;
 613                 };
 614
 615                 vdd1_reg: regulator@2 {
 616                         /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 617                         regulator-name = "vdd_mpu";
 618                         regulator-min-microvolt = <912500>;
 619                         regulator-max-microvolt = <1312500>;
 620                         regulator-boot-on;
 621                         regulator-always-on;
 622                 };
 623
 624                 vdd2_reg: regulator@3 {
 625                         /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 626                         regulator-name = "vdd_core";
 627                         regulator-min-microvolt = <912500>;
 628                         regulator-max-microvolt = <1150000>;
 629                         regulator-boot-on;
 630                         regulator-always-on;
 631                 };
 632
 633                 vdd3_reg: regulator@4 {
 634                         regulator-always-on;
 635                 };
 636
 637                 vdig1_reg: regulator@5 {
 638                         regulator-always-on;
 639                 };
 640
 641                 vdig2_reg: regulator@6 {
 642                         regulator-always-on;
 643                 };
 644
 645                 vpll_reg: regulator@7 {
 646                         regulator-always-on;
 647                 };
 648
 649                 vdac_reg: regulator@8 {
 650                         regulator-always-on;
 651                 };
 652
 653                 vaux1_reg: regulator@9 {
 654                         regulator-always-on;
 655                 };
 656
 657                 vaux2_reg: regulator@10 {
 658                         regulator-always-on;
 659                 };
 660
 661                 vaux33_reg: regulator@11 {
 662                         regulator-always-on;
 663                 };
 664
 665                 vmmc_reg: regulator@12 {
 666                         regulator-min-microvolt = <1800000>;
 667                         regulator-max-microvolt = <3300000>;
 668                         regulator-always-on;
 669                 };
 670         };
 671 };
 672
 673 &mac {
 674         pinctrl-names = "default", "sleep";
 675         pinctrl-0 = <&cpsw_default>;
 676         pinctrl-1 = <&cpsw_sleep>;
 677         status = "okay";
 678 };
 679
 680 &davinci_mdio {
 681         pinctrl-names = "default", "sleep";
 682         pinctrl-0 = <&davinci_mdio_default>;
 683         pinctrl-1 = <&davinci_mdio_sleep>;
 684         status = "okay";
 685 };
 686
 687 &cpsw_emac0 {
 688         phy_id = <&davinci_mdio>, <0>;
 689         phy-mode = "rgmii-txid";
 690 };
 691
 692 &cpsw_emac1 {
 693         phy_id = <&davinci_mdio>, <1>;
 694         phy-mode = "rgmii-txid";
 695 };
 696
 697 &tscadc {
 698         status = "okay";
 699         tsc {
 700                 ti,wires = <4>;
 701                 ti,x-plate-resistance = <200>;
 702                 ti,coordinate-readouts = <5>;
 703                 ti,wire-config = <0x00 0x11 0x22 0x33>;
 704                 ti,charge-delay = <0x400>;
 705         };
 706
 707         adc {
 708                 ti,adc-channels = <4 5 6 7>;
 709         };
 710 };
 711
 712 &mmc1 {
 713         status = "okay";
 714         vmmc-supply = <&vmmc_reg>;
 715         bus-width = <4>;
 716         pinctrl-names = "default";
 717         pinctrl-0 = <&mmc1_pins>;
 718         cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
 719 };
 720
 721 &mmc3 {
 722         /* these are on the crossbar and are outlined in the
 723            xbar-event-map element */
 724         dmas = <&edma 12 0
 725                 &edma 13 0>;
 726         dma-names = "tx", "rx";
 727         status = "okay";
 728         vmmc-supply = <&wlan_en_reg>;
 729         bus-width = <4>;
 730         pinctrl-names = "default";
 731         pinctrl-0 = <&mmc3_pins &wlan_pins>;
 732         ti,non-removable;
 733         ti,needs-special-hs-handling;
 734         cap-power-off-card;
 735         keep-power-in-suspend;
 736
 737         #address-cells = <1>;
 738         #size-cells = <0>;
 739         wlcore: wlcore@0 {
 740                 compatible = "ti,wl1835";
 741                 reg = <2>;
 742                 interrupt-parent = <&gpio3>;
 743                 interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 744         };
 745 };
 746
 747 &edma {
 748         ti,edma-xbar-event-map = /bits/ 16 <1 12
 749                                             2 13>;
 750 };
 751
 752 &sham {
 753         status = "okay";
 754 };
 755
 756 &aes {
 757         status = "okay";
 758 };
 759
 760 &dcan1 {
 761         status = "disabled";    /* Enable only if Profile 1 is selected */
 762         pinctrl-names = "default";
 763         pinctrl-0 = <&dcan1_pins_default>;
 764 };