3 * Texas Instruments <www.ti.com>
6 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
7 * Marius Groeger <mgroeger@sysgo.de>
10 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
11 * Alex Zuepke <azu@sysgo.de>
13 * (C) Copyright 2002-2004
14 * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
17 * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
19 * See file CREDITS for list of people who contributed to this
22 * This program is free software; you can redistribute it and/or
23 * modify it under the terms of the GNU General Public License as
24 * published by the Free Software Foundation; either version 2 of
25 * the License, or (at your option) any later version.
27 * This program is distributed in the hope that it will be useful,
28 * but WITHOUT ANY WARRANTY; without even the implied warranty of
29 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
30 * GNU General Public License for more details.
32 * You should have received a copy of the GNU General Public License
33 * along with this program; if not, write to the Free Software
34 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
40 #define TIMER_LOAD_VAL 0xffffffff
42 /* macro to read the 32 bit timer */
43 #define READ_TIMER (*(volatile ulong *)(CONFIG_SYS_TIMERBASE+8))
45 DECLARE_GLOBAL_DATA_PTR;
47 #define timestamp gd->arch.tbl
48 #define lastdec gd->arch.lastinc
54 /* Start the decrementer ticking down from 0xffffffff */
55 *((int32_t *) (CONFIG_SYS_TIMERBASE + LOAD_TIM)) = TIMER_LOAD_VAL;
56 val = MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE | (CONFIG_SYS_PTV << MPUTIM_PTV_BIT);
57 *((int32_t *) (CONFIG_SYS_TIMERBASE + CNTL_TIMER)) = val;
59 /* init the timestamp and lastdec value */
66 * timer without interrupts
68 ulong get_timer (ulong base)
70 return get_timer_masked () - base;
73 /* delay x useconds AND preserve advance timestamp value */
74 void __udelay (unsigned long usec)
78 if(usec >= 1000){ /* if "big" number, spread normalization to seconds */
79 tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
80 tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
81 tmo /= 1000; /* finish normalize. */
82 }else{ /* else small number, don't kill it prior to HZ multiply */
83 tmo = usec * CONFIG_SYS_HZ;
87 tmp = get_timer (0); /* get current timestamp */
88 if( (tmo + tmp + 1) < tmp ) /* if setting this fordward will roll time stamp */
89 reset_timer_masked (); /* reset "advancing" timestamp to 0, set lastdec value */
91 tmo += tmp; /* else, set advancing stamp wake up time */
93 while (get_timer_masked () < tmo)/* loop till event */
97 void reset_timer_masked (void)
100 lastdec = READ_TIMER; /* capure current decrementer value time */
101 timestamp = 0; /* start "advancing" time stamp from 0 */
104 ulong get_timer_masked (void)
106 ulong now = READ_TIMER; /* current tick value */
108 if (lastdec >= now) { /* normal mode (non roll) */
110 timestamp += lastdec - now; /* move stamp fordward with absoulte diff ticks */
111 } else { /* we have overflow of the count down timer */
112 /* nts = ts + ld + (TLV - now)
113 * ts=old stamp, ld=time that passed before passing through -1
114 * (TLV-now) amount of time after passing though -1
115 * nts = new "advancing time stamp"...it could also roll and cause problems.
117 timestamp += lastdec + TIMER_LOAD_VAL - now;
124 /* waits specified delay value and resets timestamp */
125 void udelay_masked (unsigned long usec)
131 if (usec >= 1000) { /* if "big" number, spread normalization to seconds */
132 tmo = usec / 1000; /* start to normalize for usec to ticks per sec */
133 tmo *= CONFIG_SYS_HZ; /* find number of "ticks" to wait to achieve target */
134 tmo /= 1000; /* finish normalize. */
135 } else { /* else small number, don't kill it prior to HZ multiply */
136 tmo = usec * CONFIG_SYS_HZ;
140 endtime = get_timer_masked () + tmo;
143 ulong now = get_timer_masked ();
144 diff = endtime - now;
149 * This function is derived from PowerPC code (read timebase as long long).
150 * On ARM it just returns the timer value.
152 unsigned long long get_ticks(void)
158 * This function is derived from PowerPC code (timebase clock frequency).
159 * On ARM it returns the number of timer ticks per second.
161 ulong get_tbclk (void)
165 tbclk = CONFIG_SYS_HZ;