1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * DTS file for all SPEAr1340 SoCs
5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
8 /include/ "spear13xx.dtsi"
11 compatible = "st,spear1340";
15 spics: spics@e0700000{
16 compatible = "st,spear-spics-gpio";
17 reg = <0xe0700000 0x1000>;
18 st-spics,peripcfg-reg = <0x42c>;
19 st-spics,sw-enable-bit = <21>;
20 st-spics,cs-value-bit = <20>;
21 st-spics,cs-enable-mask = <3>;
22 st-spics,cs-enable-shift = <18>;
28 miphy0: miphy@eb800000 {
29 compatible = "st,spear1340-miphy";
30 reg = <0xeb800000 0x4000>;
36 ahci0: ahci@b1000000 {
37 compatible = "snps,spear-ahci";
38 reg = <0xb1000000 0x10000>;
39 interrupts = <0 72 0x4>;
41 phy-names = "sata-phy";
45 pcie0: pcie@b1000000 {
46 compatible = "st,spear1340-pcie", "snps,dw-pcie";
47 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
48 reg-names = "dbi", "config";
49 interrupts = <0 68 0x4>;
52 phy-names = "pcie-phy";
56 ranges = <0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */
57 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */
58 bus-range = <0x00 0xff>;
63 compatible = "snps,designware-i2s";
64 reg = <0xb2400000 0x10000>;
65 interrupt-names = "play_irq";
66 interrupts = <0 98 0x4
74 compatible = "snps,designware-i2s";
75 reg = <0xb2000000 0x10000>;
76 interrupt-names = "record_irq";
77 interrupts = <0 100 0x4
84 pinmux: pinmux@e0700000 {
85 compatible = "st,spear1340-pinmux";
86 reg = <0xe0700000 0x1000>;
87 #gpio-range-cells = <3>;
91 compatible ="st,spear13xx-pwm";
92 reg = <0xe0180000 0x1000>;
98 compatible = "st,spdif-in";
99 reg = < 0xd0100000 0x20000
100 0xd0110000 0x10000 >;
101 interrupts = <0 84 0x4>;
106 compatible = "st,spdif-out";
107 reg = <0xd0000000 0x20000>;
108 interrupts = <0 85 0x4>;
113 compatible = "arm,pl022", "arm,primecell";
114 reg = <0x5d400000 0x1000>;
115 #address-cells = <1>;
117 interrupts = <0 99 0x4>;
123 #address-cells = <1>;
125 compatible = "snps,designware-i2c";
126 reg = <0xb4000000 0x1000>;
127 interrupts = <0 104 0x4>;
133 compatible = "arm,pl011", "arm,primecell";
134 reg = <0xb4100000 0x1000>;
135 interrupts = <0 105 0x4>;
137 dmas = <&dwdma0 12 0 1>,
139 dma-names = "tx", "rx";
143 st,thermal-flags = <0x2a00>;
146 gpiopinctrl: gpio@e2800000 {
147 compatible = "st,spear-plgpio";
148 reg = <0xe2800000 0x1000>;
149 interrupts = <0 107 0x4>;
150 #interrupt-cells = <1>;
151 interrupt-controller;
154 gpio-ranges = <&pinmux 0 0 252>;
157 st-plgpio,ngpio = <250>;
158 st-plgpio,wdata-reg = <0x40>;
159 st-plgpio,dir-reg = <0x00>;
160 st-plgpio,ie-reg = <0x80>;
161 st-plgpio,rdata-reg = <0x20>;
162 st-plgpio,mis-reg = <0xa0>;
163 st-plgpio,eit-reg = <0x60>;