arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts

   1 /*
   2  * Reference Device Tree Source for the armadillo 800 eva board
   3  *
   4  * Copyright (C) 2012 Renesas Solutions Corp.
   5  *
   6  * This file is licensed under the terms of the GNU General Public License
   7  * version 2.  This program is licensed "as is" without any warranty of any
   8  * kind, whether express or implied.
   9  */
  10
  11 /dts-v1/;
  12 #include "r8a7740.dtsi"
  13 #include <dt-bindings/gpio/gpio.h>
  14 #include <dt-bindings/input/input.h>
  15 #include <dt-bindings/interrupt-controller/irq.h>
  16 #include <dt-bindings/pwm/pwm.h>
  17
  18 / {
  19         model = "armadillo 800 eva reference";
  20         compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
  21
  22         chosen {
  23                 bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
  24         };
  25
  26         memory {
  27                 device_type = "memory";
  28                 reg = <0x40000000 0x20000000>;
  29         };
  30
  31         reg_3p3v: regulator@0 {
  32                 compatible = "regulator-fixed";
  33                 regulator-name = "fixed-3.3V";
  34                 regulator-min-microvolt = <3300000>;
  35                 regulator-max-microvolt = <3300000>;
  36                 regulator-always-on;
  37                 regulator-boot-on;
  38         };
  39
  40         vcc_sdhi0: regulator@1 {
  41                 compatible = "regulator-fixed";
  42
  43                 regulator-name = "SDHI0 Vcc";
  44                 regulator-min-microvolt = <3300000>;
  45                 regulator-max-microvolt = <3300000>;
  46
  47                 gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
  48                 enable-active-high;
  49         };
  50
  51         vccq_sdhi0: regulator@2 {
  52                 compatible = "regulator-gpio";
  53
  54                 regulator-name = "SDHI0 VccQ";
  55                 regulator-min-microvolt = <1800000>;
  56                 regulator-max-microvolt = <3300000>;
  57                 vin-supply = <&vcc_sdhi0>;
  58
  59                 enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
  60                 gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
  61                 states = <3300000 0
  62                           1800000 1>;
  63
  64                 enable-active-high;
  65         };
  66
  67         reg_5p0v: regulator@3 {
  68                 compatible = "regulator-fixed";
  69                 regulator-name = "fixed-5.0V";
  70                 regulator-min-microvolt = <5000000>;
  71                 regulator-max-microvolt = <5000000>;
  72                 regulator-always-on;
  73                 regulator-boot-on;
  74         };
  75
  76         gpio-keys {
  77                 compatible = "gpio-keys";
  78
  79                 power-key {
  80                         gpios = <&pfc 99 GPIO_ACTIVE_LOW>;
  81                         linux,code = <KEY_POWER>;
  82                         label = "SW3";
  83                         gpio-key,wakeup;
  84                 };
  85
  86                 back-key {
  87                         gpios = <&pfc 100 GPIO_ACTIVE_LOW>;
  88                         linux,code = <KEY_BACK>;
  89                         label = "SW4";
  90                 };
  91
  92                 menu-key {
  93                         gpios = <&pfc 97 GPIO_ACTIVE_LOW>;
  94                         linux,code = <KEY_MENU>;
  95                         label = "SW5";
  96                 };
  97
  98                 home-key {
  99                         gpios = <&pfc 98 GPIO_ACTIVE_LOW>;
 100                         linux,code = <KEY_HOME>;
 101                         label = "SW6";
 102                 };
 103         };
 104
 105         leds {
 106                 compatible = "gpio-leds";
 107                 led3 {
 108                         gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
 109                         label = "LED3";
 110                 };
 111                 led4 {
 112                         gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
 113                         label = "LED4";
 114                 };
 115                 led5 {
 116                         gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
 117                         label = "LED5";
 118                 };
 119                 led6 {
 120                         gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
 121                         label = "LED6";
 122                 };
 123         };
 124
 125         i2c2: i2c@2 {
 126                 #address-cells = <1>;
 127                 #size-cells = <0>;
 128                 compatible = "i2c-gpio";
 129                 gpios = <&pfc 208 GPIO_ACTIVE_HIGH /* sda */
 130                          &pfc 91 GPIO_ACTIVE_HIGH /* scl */
 131                         >;
 132                 i2c-gpio,delay-us = <5>;
 133         };
 134
 135         backlight {
 136                 compatible = "pwm-backlight";
 137                 pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
 138                 brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
 139                 default-brightness-level = <9>;
 140                 pinctrl-0 = <&backlight_pins>;
 141                 pinctrl-names = "default";
 142                 power-supply = <&reg_5p0v>;
 143                 enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>;
 144         };
 145
 146         sound {
 147                 compatible = "simple-audio-card";
 148
 149                 simple-audio-card,format = "i2s";
 150
 151                 simple-audio-card,cpu {
 152                         sound-dai = <&sh_fsi2 0>;
 153                         bitclock-inversion;
 154                 };
 155
 156                 simple-audio-card,codec {
 157                         sound-dai = <&wm8978>;
 158                         bitclock-master;
 159                         frame-master;
 160                         system-clock-frequency = <12288000>;
 161                 };
 162         };
 163 };
 164
 165 &ether {
 166         pinctrl-0 = <&ether_pins>;
 167         pinctrl-names = "default";
 168
 169         phy-handle = <&phy0>;
 170         status = "ok";
 171
 172         phy0: ethernet-phy@0 {
 173                 reg = <0>;
 174         };
 175 };
 176
 177 &i2c0 {
 178         status = "okay";
 179         touchscreen@55 {
 180                 compatible = "sitronix,st1232";
 181                 reg = <0x55>;
 182                 interrupt-parent = <&irqpin1>;
 183                 interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
 184                 pinctrl-0 = <&st1232_pins>;
 185                 pinctrl-names = "default";
 186                 gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
 187         };
 188
 189         wm8978: wm8978@1a {
 190                 #sound-dai-cells = <0>;
 191                 compatible = "wlf,wm8978";
 192                 reg = <0x1a>;
 193         };
 194 };
 195
 196 &i2c2 {
 197         status = "okay";
 198         rtc@30 {
 199                 compatible = "sii,s35390a";
 200                 reg = <0x30>;
 201         };
 202 };
 203
 204 &pfc {
 205         pinctrl-0 = <&scifa1_pins>;
 206         pinctrl-names = "default";
 207
 208         ether_pins: ether {
 209                 renesas,groups = "gether_mii", "gether_int";
 210                 renesas,function = "gether";
 211         };
 212
 213         scifa1_pins: serial1 {
 214                 renesas,groups = "scifa1_data";
 215                 renesas,function = "scifa1";
 216         };
 217
 218         st1232_pins: touchscreen {
 219                 renesas,groups = "intc_irq10";
 220                 renesas,function = "intc";
 221         };
 222
 223         backlight_pins: backlight {
 224                 renesas,groups = "tpu0_to2_1";
 225                 renesas,function = "tpu0";
 226         };
 227
 228         mmc0_pins: mmc0 {
 229                 renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
 230                 renesas,function = "mmc0";
 231         };
 232
 233         sdhi0_pins: sd0 {
 234                 renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
 235                 renesas,function = "sdhi0";
 236         };
 237
 238         fsia_pins: sounda {
 239                 renesas,groups = "fsia_sclk_in", "fsia_mclk_out",
 240                                  "fsia_data_in_1", "fsia_data_out_0";
 241                 renesas,function = "fsia";
 242         };
 243 };
 244
 245 &tpu {
 246         status = "okay";
 247 };
 248
 249 &mmcif0 {
 250         pinctrl-0 = <&mmc0_pins>;
 251         pinctrl-names = "default";
 252
 253         vmmc-supply = <&reg_3p3v>;
 254         bus-width = <8>;
 255         non-removable;
 256         status = "okay";
 257 };
 258
 259 &sdhi0 {
 260         pinctrl-0 = <&sdhi0_pins>;
 261         pinctrl-names = "default";
 262
 263         vmmc-supply = <&vcc_sdhi0>;
 264         vqmmc-supply = <&vccq_sdhi0>;
 265         bus-width = <4>;
 266         cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
 267         status = "okay";
 268 };
 269
 270 &sh_fsi2 {
 271         pinctrl-0 = <&fsia_pins>;
 272         pinctrl-names = "default";
 273
 274         status = "okay";
 275 };