arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 #include "qcom-msm8974pro.dtsi"
   3 #include "qcom-pma8084.dtsi"
   4 #include <dt-bindings/input/input.h>
   5 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
   6 #include <dt-bindings/leds/common.h>
   7
   8 / {
   9         model = "Samsung Galaxy S5";
  10         compatible = "samsung,klte", "qcom,msm8974pro", "qcom,msm8974";
  11         chassis-type = "handset";
  12
  13         aliases {
  14                 serial0 = &blsp1_uart1;
  15                 mmc0 = &sdhc_1; /* SDC1 eMMC slot */
  16                 mmc1 = &sdhc_3; /* SDC2 SD card slot */
  17         };
  18
  19         chosen {
  20                 stdout-path = "serial0:115200n8";
  21         };
  22
  23         gpio-keys {
  24                 compatible = "gpio-keys";
  25
  26                 pinctrl-names = "default";
  27                 pinctrl-0 = <&gpio_keys_pin_a>;
  28
  29                 key-volume-down {
  30                         label = "volume_down";
  31                         gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
  32                         linux,input-type = <1>;
  33                         linux,code = <KEY_VOLUMEDOWN>;
  34                         debounce-interval = <15>;
  35                 };
  36
  37                 key-home {
  38                         label = "home_key";
  39                         gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
  40                         linux,input-type = <1>;
  41                         linux,code = <KEY_HOMEPAGE>;
  42                         wakeup-source;
  43                         debounce-interval = <15>;
  44                 };
  45
  46                 key-volume-up {
  47                         label = "volume_up";
  48                         gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
  49                         linux,input-type = <1>;
  50                         linux,code = <KEY_VOLUMEUP>;
  51                         debounce-interval = <15>;
  52                 };
  53         };
  54
  55         i2c-gpio-touchkey {
  56                 compatible = "i2c-gpio";
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59                 sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  60                 scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  61                 pinctrl-names = "default";
  62                 pinctrl-0 = <&i2c_touchkey_pins>;
  63
  64                 touchkey@20 {
  65                         compatible = "cypress,tm2-touchkey";
  66                         reg = <0x20>;
  67
  68                         interrupt-parent = <&pma8084_gpios>;
  69                         interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
  70                         pinctrl-names = "default";
  71                         pinctrl-0 = <&touchkey_pin>;
  72
  73                         vcc-supply = <&max77826_ldo15>;
  74                         vdd-supply = <&pma8084_l19>;
  75
  76                         linux,keycodes = <KEY_APPSELECT KEY_BACK>;
  77                 };
  78         };
  79
  80         i2c-gpio-led {
  81                 compatible = "i2c-gpio";
  82                 #address-cells = <1>;
  83                 #size-cells = <0>;
  84                 scl-gpios = <&tlmm 121 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  85                 sda-gpios = <&tlmm 120 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
  86                 pinctrl-names = "default";
  87                 pinctrl-0 = <&i2c_led_gpioex_pins>;
  88
  89                 i2c-gpio,delay-us = <2>;
  90
  91                 gpio_expander: gpio@20 {
  92                         compatible = "nxp,pcal6416";
  93                         reg = <0x20>;
  94
  95                         gpio-controller;
  96                         #gpio-cells = <2>;
  97
  98                         vcc-supply = <&pma8084_s4>;
  99
 100                         pinctrl-names = "default";
 101                         pinctrl-0 = <&gpioex_pin>;
 102
 103                         reset-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
 104                 };
 105
 106                 led-controller@30 {
 107                         compatible = "panasonic,an30259a";
 108                         reg = <0x30>;
 109
 110                         #address-cells = <1>;
 111                         #size-cells = <0>;
 112
 113                         led@1 {
 114                                 reg = <1>;
 115                                 function = LED_FUNCTION_STATUS;
 116                                 color = <LED_COLOR_ID_RED>;
 117                         };
 118
 119                         led@2 {
 120                                 reg = <2>;
 121                                 function = LED_FUNCTION_STATUS;
 122                                 color = <LED_COLOR_ID_GREEN>;
 123                         };
 124
 125                         led@3 {
 126                                 reg = <3>;
 127                                 function = LED_FUNCTION_STATUS;
 128                                 color = <LED_COLOR_ID_BLUE>;
 129                         };
 130                 };
 131         };
 132
 133         vreg_wlan: wlan-regulator {
 134                 compatible = "regulator-fixed";
 135
 136                 regulator-name = "wl-reg";
 137                 regulator-min-microvolt = <3300000>;
 138                 regulator-max-microvolt = <3300000>;
 139
 140                 gpio = <&gpio_expander 8 GPIO_ACTIVE_HIGH>;
 141                 enable-active-high;
 142         };
 143
 144         vreg_panel: panel-regulator {
 145                 compatible = "regulator-fixed";
 146
 147                 pinctrl-names = "default";
 148                 pinctrl-0 = <&panel_en_pin>;
 149
 150                 regulator-name = "panel-vddr-reg";
 151                 regulator-min-microvolt = <1500000>;
 152                 regulator-max-microvolt = <1500000>;
 153
 154                 gpio = <&pma8084_gpios 14 GPIO_ACTIVE_HIGH>;
 155                 enable-active-high;
 156         };
 157
 158         /delete-node/ vreg-boost;
 159 };
 160
 161 &blsp1_i2c2 {
 162         status = "okay";
 163
 164         touchscreen@20 {
 165                 compatible = "syna,rmi4-i2c";
 166                 reg = <0x20>;
 167
 168                 interrupt-parent = <&pma8084_gpios>;
 169                 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
 170
 171                 vdd-supply = <&max77826_ldo13>;
 172                 vio-supply = <&pma8084_lvs2>;
 173
 174                 pinctrl-names = "default";
 175                 pinctrl-0 = <&touch_pin>;
 176
 177                 syna,startup-delay-ms = <100>;
 178
 179                 #address-cells = <1>;
 180                 #size-cells = <0>;
 181
 182                 rmi4-f01@1 {
 183                         reg = <0x1>;
 184                         syna,nosleep-mode = <1>;
 185                 };
 186
 187                 rmi4-f12@12 {
 188                         reg = <0x12>;
 189                         syna,sensor-type = <1>;
 190                 };
 191         };
 192 };
 193
 194 &blsp1_i2c6 {
 195         status = "okay";
 196
 197         pmic@60 {
 198                 reg = <0x60>;
 199                 compatible = "maxim,max77826";
 200
 201                 regulators {
 202                         max77826_ldo1: LDO1 {
 203                                 regulator-min-microvolt = <1200000>;
 204                                 regulator-max-microvolt = <1200000>;
 205                         };
 206
 207                         max77826_ldo2: LDO2 {
 208                                 regulator-min-microvolt = <1000000>;
 209                                 regulator-max-microvolt = <1000000>;
 210                         };
 211
 212                         max77826_ldo3: LDO3 {
 213                                 regulator-min-microvolt = <1200000>;
 214                                 regulator-max-microvolt = <1200000>;
 215                         };
 216
 217                         max77826_ldo4: LDO4 {
 218                                 regulator-min-microvolt = <1800000>;
 219                                 regulator-max-microvolt = <1800000>;
 220                         };
 221
 222                         max77826_ldo5: LDO5 {
 223                                 regulator-min-microvolt = <1800000>;
 224                                 regulator-max-microvolt = <1800000>;
 225                         };
 226
 227                         max77826_ldo6: LDO6 {
 228                                 regulator-min-microvolt = <1800000>;
 229                                 regulator-max-microvolt = <3300000>;
 230                         };
 231
 232                         max77826_ldo7: LDO7 {
 233                                 regulator-min-microvolt = <1800000>;
 234                                 regulator-max-microvolt = <1800000>;
 235                         };
 236
 237                         max77826_ldo8: LDO8 {
 238                                 regulator-min-microvolt = <1800000>;
 239                                 regulator-max-microvolt = <3300000>;
 240                         };
 241
 242                         max77826_ldo9: LDO9 {
 243                                 regulator-min-microvolt = <1800000>;
 244                                 regulator-max-microvolt = <1800000>;
 245                         };
 246
 247                         max77826_ldo10: LDO10 {
 248                                 regulator-min-microvolt = <2800000>;
 249                                 regulator-max-microvolt = <2950000>;
 250                         };
 251
 252                         max77826_ldo11: LDO11 {
 253                                 regulator-min-microvolt = <2700000>;
 254                                 regulator-max-microvolt = <2950000>;
 255                         };
 256
 257                         max77826_ldo12: LDO12 {
 258                                 regulator-min-microvolt = <2500000>;
 259                                 regulator-max-microvolt = <3300000>;
 260                         };
 261
 262                         max77826_ldo13: LDO13 {
 263                                 regulator-min-microvolt = <3300000>;
 264                                 regulator-max-microvolt = <3300000>;
 265                         };
 266
 267                         max77826_ldo14: LDO14 {
 268                                 regulator-min-microvolt = <3300000>;
 269                                 regulator-max-microvolt = <3300000>;
 270                         };
 271
 272                         max77826_ldo15: LDO15 {
 273                                 regulator-min-microvolt = <1800000>;
 274                                 regulator-max-microvolt = <1800000>;
 275                         };
 276
 277                         max77826_buck: BUCK {
 278                                 regulator-min-microvolt = <1225000>;
 279                                 regulator-max-microvolt = <1225000>;
 280                         };
 281
 282                         max77826_buckboost: BUCKBOOST {
 283                                 regulator-min-microvolt = <3400000>;
 284                                 regulator-max-microvolt = <3400000>;
 285                         };
 286                 };
 287         };
 288 };
 289
 290 &blsp1_uart2 {
 291         status = "okay";
 292 };
 293
 294 &blsp2_i2c6 {
 295         status = "okay";
 296
 297         fuelgauge@36 {
 298                 compatible = "maxim,max17048";
 299                 reg = <0x36>;
 300
 301                 maxim,double-soc;
 302                 maxim,rcomp = /bits/ 8 <0x56>;
 303
 304                 interrupt-parent = <&pma8084_gpios>;
 305                 interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
 306
 307                 pinctrl-names = "default";
 308                 pinctrl-0 = <&fuelgauge_pin>;
 309         };
 310 };
 311
 312 &blsp2_uart2 {
 313         status = "okay";
 314
 315         pinctrl-names = "default", "sleep";
 316         pinctrl-0 = <&blsp2_uart2_pins_active>;
 317         pinctrl-1 = <&blsp2_uart2_pins_sleep>;
 318
 319         bluetooth {
 320                 compatible = "brcm,bcm43540-bt";
 321                 max-speed = <3000000>;
 322                 pinctrl-names = "default";
 323                 pinctrl-0 = <&bt_pins>;
 324                 device-wakeup-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
 325                 shutdown-gpios = <&gpio_expander 9 GPIO_ACTIVE_HIGH>;
 326                 interrupt-parent = <&tlmm>;
 327                 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>;
 328                 interrupt-names = "host-wakeup";
 329         };
 330 };
 331
 332 &gpu {
 333         status = "okay";
 334 };
 335
 336 &mdss {
 337         status = "okay";
 338 };
 339
 340 &mdss_dsi0 {
 341         status = "okay";
 342
 343         vdda-supply = <&pma8084_l2>;
 344         vdd-supply = <&pma8084_l22>;
 345         vddio-supply = <&pma8084_l12>;
 346
 347         panel: panel@0 {
 348                 reg = <0>;
 349                 compatible = "samsung,s6e3fa2";
 350
 351                 pinctrl-names = "default";
 352                 pinctrl-0 = <&panel_te_pin &panel_rst_pin>;
 353
 354                 iovdd-supply = <&pma8084_lvs4>;
 355                 vddr-supply = <&vreg_panel>;
 356
 357                 reset-gpios = <&pma8084_gpios 17 GPIO_ACTIVE_LOW>;
 358                 te-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
 359
 360                 port {
 361                         panel_in: endpoint {
 362                                 remote-endpoint = <&mdss_dsi0_out>;
 363                         };
 364                 };
 365         };
 366 };
 367
 368 &mdss_dsi0_out {
 369         remote-endpoint = <&panel_in>;
 370         data-lanes = <0 1 2 3>;
 371 };
 372
 373 &mdss_dsi0_phy {
 374         status = "okay";
 375
 376         vddio-supply = <&pma8084_l12>;
 377 };
 378
 379 &pma8084_gpios {
 380         gpio_keys_pin_a: gpio-keys-active-state {
 381                 pins = "gpio2", "gpio3", "gpio5";
 382                 function = "normal";
 383
 384                 bias-pull-up;
 385                 power-source = <PMA8084_GPIO_S4>;
 386         };
 387
 388         touchkey_pin: touchkey-int-state {
 389                 pins = "gpio6";
 390                 function = "normal";
 391                 bias-disable;
 392                 input-enable;
 393                 power-source = <PMA8084_GPIO_S4>;
 394         };
 395
 396         touch_pin: touchscreen-int-state {
 397                 pins = "gpio8";
 398                 function = "normal";
 399                 bias-disable;
 400                 input-enable;
 401                 power-source = <PMA8084_GPIO_S4>;
 402         };
 403
 404         panel_en_pin: panel-en-state {
 405                 pins = "gpio14";
 406                 function = "normal";
 407                 bias-pull-up;
 408                 power-source = <PMA8084_GPIO_S4>;
 409                 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 410         };
 411
 412         wlan_sleep_clk_pin: wlan-sleep-clk-state {
 413                 pins = "gpio16";
 414                 function = "func2";
 415
 416                 output-high;
 417                 power-source = <PMA8084_GPIO_S4>;
 418                 qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
 419         };
 420
 421         panel_rst_pin: panel-rst-state {
 422                 pins = "gpio17";
 423                 function = "normal";
 424                 bias-disable;
 425                 power-source = <PMA8084_GPIO_S4>;
 426                 qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
 427         };
 428
 429         fuelgauge_pin: fuelgauge-int-state {
 430                 pins = "gpio21";
 431                 function = "normal";
 432                 bias-disable;
 433                 input-enable;
 434                 power-source = <PMA8084_GPIO_S4>;
 435         };
 436 };
 437
 438 &remoteproc_adsp {
 439         status = "okay";
 440         cx-supply = <&pma8084_s2>;
 441 };
 442
 443 &remoteproc_mss {
 444         status = "okay";
 445         cx-supply = <&pma8084_s2>;
 446         mss-supply = <&pma8084_s6>;
 447         mx-supply = <&pma8084_s1>;
 448         pll-supply = <&pma8084_l12>;
 449 };
 450
 451 &rpm_requests {
 452         regulators-0 {
 453                 compatible = "qcom,rpm-pma8084-regulators";
 454
 455                 pma8084_s1: s1 {
 456                         regulator-min-microvolt = <675000>;
 457                         regulator-max-microvolt = <1050000>;
 458                         regulator-always-on;
 459                 };
 460
 461                 pma8084_s2: s2 {
 462                         regulator-min-microvolt = <500000>;
 463                         regulator-max-microvolt = <1050000>;
 464                 };
 465
 466                 pma8084_s3: s3 {
 467                         regulator-min-microvolt = <1300000>;
 468                         regulator-max-microvolt = <1300000>;
 469                 };
 470
 471                 pma8084_s4: s4 {
 472                         regulator-min-microvolt = <1800000>;
 473                         regulator-max-microvolt = <1800000>;
 474                 };
 475
 476                 pma8084_s5: s5 {
 477                         regulator-min-microvolt = <2150000>;
 478                         regulator-max-microvolt = <2150000>;
 479                 };
 480
 481                 pma8084_s6: s6 {
 482                         regulator-min-microvolt = <1050000>;
 483                         regulator-max-microvolt = <1050000>;
 484                 };
 485
 486                 pma8084_l1: l1 {
 487                         regulator-min-microvolt = <1225000>;
 488                         regulator-max-microvolt = <1225000>;
 489                 };
 490
 491                 pma8084_l2: l2 {
 492                         regulator-min-microvolt = <1200000>;
 493                         regulator-max-microvolt = <1200000>;
 494                 };
 495
 496                 pma8084_l3: l3 {
 497                         regulator-min-microvolt = <1050000>;
 498                         regulator-max-microvolt = <1200000>;
 499                 };
 500
 501                 pma8084_l4: l4 {
 502                         regulator-min-microvolt = <1200000>;
 503                         regulator-max-microvolt = <1225000>;
 504                 };
 505
 506                 pma8084_l5: l5 {
 507                         regulator-min-microvolt = <1800000>;
 508                         regulator-max-microvolt = <1800000>;
 509                 };
 510
 511                 pma8084_l6: l6 {
 512                         regulator-min-microvolt = <1800000>;
 513                         regulator-max-microvolt = <1800000>;
 514                 };
 515
 516                 pma8084_l7: l7 {
 517                         regulator-min-microvolt = <1800000>;
 518                         regulator-max-microvolt = <1800000>;
 519                 };
 520
 521                 pma8084_l8: l8 {
 522                         regulator-min-microvolt = <1800000>;
 523                         regulator-max-microvolt = <1800000>;
 524                 };
 525
 526                 pma8084_l9: l9 {
 527                         regulator-min-microvolt = <1800000>;
 528                         regulator-max-microvolt = <2950000>;
 529                 };
 530
 531                 pma8084_l10: l10 {
 532                         regulator-min-microvolt = <1800000>;
 533                         regulator-max-microvolt = <2950000>;
 534                 };
 535
 536                 pma8084_l11: l11 {
 537                         regulator-min-microvolt = <1300000>;
 538                         regulator-max-microvolt = <1300000>;
 539                 };
 540
 541                 pma8084_l12: l12 {
 542                         regulator-min-microvolt = <1800000>;
 543                         regulator-max-microvolt = <1800000>;
 544                         regulator-always-on;
 545                 };
 546
 547                 pma8084_l13: l13 {
 548                         regulator-min-microvolt = <1800000>;
 549                         regulator-max-microvolt = <2950000>;
 550                 };
 551
 552                 pma8084_l14: l14 {
 553                         regulator-min-microvolt = <1800000>;
 554                         regulator-max-microvolt = <1800000>;
 555                 };
 556
 557                 pma8084_l15: l15 {
 558                         regulator-min-microvolt = <2050000>;
 559                         regulator-max-microvolt = <2050000>;
 560                 };
 561
 562                 pma8084_l16: l16 {
 563                         regulator-min-microvolt = <2700000>;
 564                         regulator-max-microvolt = <2700000>;
 565                 };
 566
 567                 pma8084_l17: l17 {
 568                         regulator-min-microvolt = <2850000>;
 569                         regulator-max-microvolt = <2850000>;
 570                 };
 571
 572                 pma8084_l18: l18 {
 573                         regulator-min-microvolt = <2850000>;
 574                         regulator-max-microvolt = <2850000>;
 575                 };
 576
 577                 pma8084_l19: l19 {
 578                         regulator-min-microvolt = <3300000>;
 579                         regulator-max-microvolt = <3300000>;
 580                 };
 581
 582                 pma8084_l20: l20 {
 583                         regulator-min-microvolt = <2950000>;
 584                         regulator-max-microvolt = <2950000>;
 585                         regulator-system-load = <200000>;
 586                         regulator-allow-set-load;
 587                 };
 588
 589                 pma8084_l21: l21 {
 590                         regulator-min-microvolt = <2950000>;
 591                         regulator-max-microvolt = <2950000>;
 592                         regulator-system-load = <200000>;
 593                         regulator-allow-set-load;
 594                 };
 595
 596                 pma8084_l22: l22 {
 597                         regulator-min-microvolt = <3000000>;
 598                         regulator-max-microvolt = <3300000>;
 599                 };
 600
 601                 pma8084_l23: l23 {
 602                         regulator-min-microvolt = <3000000>;
 603                         regulator-max-microvolt = <3000000>;
 604                 };
 605
 606                 pma8084_l24: l24 {
 607                         regulator-min-microvolt = <3075000>;
 608                         regulator-max-microvolt = <3075000>;
 609                 };
 610
 611                 pma8084_l25: l25 {
 612                         regulator-min-microvolt = <2100000>;
 613                         regulator-max-microvolt = <2100000>;
 614                 };
 615
 616                 pma8084_l26: l26 {
 617                         regulator-min-microvolt = <1800000>;
 618                         regulator-max-microvolt = <2050000>;
 619                 };
 620
 621                 pma8084_l27: l27 {
 622                         regulator-min-microvolt = <1000000>;
 623                         regulator-max-microvolt = <1225000>;
 624                 };
 625
 626                 pma8084_lvs1: lvs1 {};
 627                 pma8084_lvs2: lvs2 {};
 628                 pma8084_lvs3: lvs3 {};
 629                 pma8084_lvs4: lvs4 {};
 630
 631                 pma8084_5vs1: 5vs1 {};
 632         };
 633 };
 634
 635 &sdhc_1 {
 636         status = "okay";
 637
 638         vmmc-supply = <&pma8084_l20>;
 639         vqmmc-supply = <&pma8084_s4>;
 640
 641         pinctrl-names = "default", "sleep";
 642         pinctrl-0 = <&sdc1_on>;
 643         pinctrl-1 = <&sdc1_off>;
 644 };
 645
 646 &sdhc_2 {
 647         status = "okay";
 648         max-frequency = <100000000>;
 649         vmmc-supply = <&vreg_wlan>;
 650         vqmmc-supply = <&pma8084_s4>;
 651         non-removable;
 652
 653         pinctrl-names = "default", "sleep";
 654         pinctrl-0 = <&sdc2_on>;
 655         pinctrl-1 = <&sdc2_off>;
 656
 657         wifi@1 {
 658                 reg = <1>;
 659                 compatible = "brcm,bcm4329-fmac";
 660
 661                 interrupt-parent = <&tlmm>;
 662                 interrupts = <92 IRQ_TYPE_LEVEL_HIGH>;
 663                 interrupt-names = "host-wake";
 664
 665                 pinctrl-names = "default";
 666                 pinctrl-0 = <&wlan_sleep_clk_pin &wifi_pin>;
 667         };
 668 };
 669
 670 &sdhc_3 {
 671         status = "okay";
 672         max-frequency = <100000000>;
 673         vmmc-supply = <&pma8084_l21>;
 674         vqmmc-supply = <&pma8084_l13>;
 675
 676         /*
 677          * cd-gpio is intentionally disabled. If enabled, an SD card
 678          * present during boot is not initialized correctly. Without
 679          * cd-gpios the driver resorts to polling, so hotplug works.
 680          */
 681         pinctrl-names = "default";
 682         pinctrl-0 = <&sdc3_on /* &sdhc3_cd_pin */>;
 683         /* cd-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; */
 684 };
 685
 686 &tlmm {
 687         /* This seems suspicious, but somebody with this device should look into it. */
 688         blsp2_uart2_pins_active: blsp2-uart2-pins-active-state {
 689                 pins = "gpio45", "gpio46", "gpio47", "gpio48";
 690                 function = "blsp_uart8";
 691                 drive-strength = <8>;
 692                 bias-disable;
 693         };
 694
 695         blsp2_uart2_pins_sleep: blsp2-uart2-pins-sleep-state {
 696                 pins = "gpio45", "gpio46", "gpio47", "gpio48";
 697                 function = "gpio";
 698                 drive-strength = <2>;
 699                 bias-pull-down;
 700         };
 701
 702         bt_pins: bt-pins-state {
 703                 hostwake-pins {
 704                         pins = "gpio75";
 705                         function = "gpio";
 706                         drive-strength = <16>;
 707                 };
 708
 709                 devwake-pins {
 710                         pins = "gpio91";
 711                         function = "gpio";
 712                         drive-strength = <2>;
 713                 };
 714         };
 715
 716         sdc1_on: sdhc1-on-state {
 717                 clk-pins {
 718                         pins = "sdc1_clk";
 719                         drive-strength = <4>;
 720                         bias-disable;
 721                 };
 722
 723                 cmd-data-pins {
 724                         pins = "sdc1_cmd", "sdc1_data";
 725                         drive-strength = <4>;
 726                         bias-pull-up;
 727                 };
 728         };
 729
 730         sdc3_on: sdc3-on-state {
 731                 pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
 732                 function = "sdc3";
 733                 drive-strength = <8>;
 734                 bias-disable;
 735         };
 736
 737         sdhc3_cd_pin: sdc3-cd-on-state {
 738                 pins = "gpio62";
 739                 function = "gpio";
 740
 741                 drive-strength = <2>;
 742                 bias-disable;
 743         };
 744
 745         sdc2_on: sdhc2-on-state {
 746                 clk-pins {
 747                         pins = "sdc2_clk";
 748                         drive-strength = <6>;
 749                         bias-disable;
 750                 };
 751
 752                 cmd-data-pins {
 753                         pins = "sdc2_cmd", "sdc2_data";
 754                         drive-strength = <6>;
 755                         bias-pull-up;
 756                 };
 757         };
 758
 759         i2c_touchkey_pins: i2c-touchkey-state {
 760                 pins = "gpio95", "gpio96";
 761                 function = "gpio";
 762                 bias-pull-up;
 763         };
 764
 765         i2c_led_gpioex_pins: i2c-led-gpioex-state {
 766                 pins = "gpio120", "gpio121";
 767                 function = "gpio";
 768                 bias-pull-down;
 769         };
 770
 771         gpioex_pin: gpioex-state {
 772                 pins = "gpio145";
 773                 function = "gpio";
 774                 bias-pull-up;
 775                 drive-strength = <2>;
 776         };
 777
 778         wifi_pin: wifi-state {
 779                 pins = "gpio92";
 780                 function = "gpio";
 781                 bias-pull-down;
 782         };
 783
 784         panel_te_pin: panel-state {
 785                 pins = "gpio12";
 786                 function = "mdp_vsync";
 787                 drive-strength = <2>;
 788                 bias-disable;
 789         };
 790 };
 791
 792 &usb {
 793         status = "okay";
 794
 795         phys = <&usb_hs1_phy>;
 796         phy-select = <&tcsr 0xb000 0>;
 797
 798         hnp-disable;
 799         srp-disable;
 800         adp-disable;
 801 };
 802
 803 &usb_hs1_phy {
 804         status = "okay";
 805
 806         v1p8-supply = <&pma8084_l6>;
 807         v3p3-supply = <&pma8084_l24>;
 808
 809         qcom,init-seq = /bits/ 8 <0x1 0x64>;
 810 };