arch/arm/boot/dts/ls1021a.dtsi

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * This file is dual-licensed: you can use it either under the terms
   5  * of the GPL or the X11 license, at your option. Note that this dual
   6  * licensing only applies to this file, and not this project as a
   7  * whole.
   8  *
   9  *  a) This file is free software; you can redistribute it and/or
  10  *     modify it under the terms of the GNU General Public License as
  11  *     published by the Free Software Foundation; either version 2 of
  12  *     the License, or (at your option) any later version.
  13  *
  14  *     This file is distributed in the hope that it will be useful,
  15  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  *     GNU General Public License for more details.
  18  *
  19  *     You should have received a copy of the GNU General Public
  20  *     License along with this file; if not, write to the Free
  21  *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
  22  *     MA 02110-1301 USA
  23  *
  24  * Or, alternatively,
  25  *
  26  *  b) Permission is hereby granted, free of charge, to any person
  27  *     obtaining a copy of this software and associated documentation
  28  *     files (the "Software"), to deal in the Software without
  29  *     restriction, including without limitation the rights to use,
  30  *     copy, modify, merge, publish, distribute, sublicense, and/or
  31  *     sell copies of the Software, and to permit persons to whom the
  32  *     Software is furnished to do so, subject to the following
  33  *     conditions:
  34  *
  35  *     The above copyright notice and this permission notice shall be
  36  *     included in all copies or substantial portions of the Software.
  37  *
  38  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  39  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  40  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  41  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  42  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  43  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  44  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  45  *     OTHER DEALINGS IN THE SOFTWARE.
  46  */
  47
  48 #include "skeleton64.dtsi"
  49 #include <dt-bindings/interrupt-controller/arm-gic.h>
  50 #include <dt-bindings/thermal/thermal.h>
  51
  52 / {
  53         compatible = "fsl,ls1021a";
  54         interrupt-parent = <&gic>;
  55
  56         aliases {
  57                 crypto = &crypto;
  58                 ethernet0 = &enet0;
  59                 ethernet1 = &enet1;
  60                 ethernet2 = &enet2;
  61                 serial0 = &lpuart0;
  62                 serial1 = &lpuart1;
  63                 serial2 = &lpuart2;
  64                 serial3 = &lpuart3;
  65                 serial4 = &lpuart4;
  66                 serial5 = &lpuart5;
  67                 sysclk = &sysclk;
  68         };
  69
  70         cpus {
  71                 #address-cells = <1>;
  72                 #size-cells = <0>;
  73
  74                 cpu0: cpu@f00 {
  75                         compatible = "arm,cortex-a7";
  76                         device_type = "cpu";
  77                         reg = <0xf00>;
  78                         clocks = <&clockgen 1 0>;
  79                         #cooling-cells = <2>;
  80                 };
  81
  82                 cpu1: cpu@f01 {
  83                         compatible = "arm,cortex-a7";
  84                         device_type = "cpu";
  85                         reg = <0xf01>;
  86                         clocks = <&clockgen 1 0>;
  87                         #cooling-cells = <2>;
  88                 };
  89         };
  90
  91         sysclk: sysclk {
  92                 compatible = "fixed-clock";
  93                 #clock-cells = <0>;
  94                 clock-frequency = <100000000>;
  95                 clock-output-names = "sysclk";
  96         };
  97
  98         timer {
  99                 compatible = "arm,armv7-timer";
 100                 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 101                              <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 102                              <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
 103                              <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 104         };
 105
 106         pmu {
 107                 compatible = "arm,cortex-a7-pmu";
 108                 interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
 109                              <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
 110                 interrupt-affinity = <&cpu0>, <&cpu1>;
 111         };
 112
 113         reboot {
 114                 compatible = "syscon-reboot";
 115                 regmap = <&dcfg>;
 116                 offset = <0xb0>;
 117                 mask = <0x02>;
 118         };
 119
 120         soc {
 121                 compatible = "simple-bus";
 122                 #address-cells = <2>;
 123                 #size-cells = <2>;
 124                 device_type = "soc";
 125                 interrupt-parent = <&gic>;
 126                 ranges;
 127
 128                 gic: interrupt-controller@1400000 {
 129                         compatible = "arm,gic-400", "arm,cortex-a7-gic";
 130                         #interrupt-cells = <3>;
 131                         interrupt-controller;
 132                         reg = <0x0 0x1401000 0x0 0x1000>,
 133                               <0x0 0x1402000 0x0 0x2000>,
 134                               <0x0 0x1404000 0x0 0x2000>,
 135                               <0x0 0x1406000 0x0 0x2000>;
 136                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
 137
 138                 };
 139
 140                 msi1: msi-controller@1570e00 {
 141                         compatible = "fsl,ls1021a-msi";
 142                         reg = <0x0 0x1570e00 0x0 0x8>;
 143                         msi-controller;
 144                         interrupts =  <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
 145                 };
 146
 147                 msi2: msi-controller@1570e08 {
 148                         compatible = "fsl,ls1021a-msi";
 149                         reg = <0x0 0x1570e08 0x0 0x8>;
 150                         msi-controller;
 151                         interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 152                 };
 153
 154                 ifc: ifc@1530000 {
 155                         compatible = "fsl,ifc", "simple-bus";
 156                         reg = <0x0 0x1530000 0x0 0x10000>;
 157                         interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 158                 };
 159
 160                 dcfg: dcfg@1ee0000 {
 161                         compatible = "fsl,ls1021a-dcfg", "syscon";
 162                         reg = <0x0 0x1ee0000 0x0 0x10000>;
 163                         big-endian;
 164                 };
 165
 166                 qspi: quadspi@1550000 {
 167                         compatible = "fsl,ls1021a-qspi";
 168                         #address-cells = <1>;
 169                         #size-cells = <0>;
 170                         reg = <0x0 0x1550000 0x0 0x10000>,
 171                               <0x0 0x40000000 0x0 0x40000000>;
 172                         reg-names = "QuadSPI", "QuadSPI-memory";
 173                         interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 174                         clock-names = "qspi_en", "qspi";
 175                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 176                         big-endian;
 177                         status = "disabled";
 178                 };
 179
 180                 esdhc: esdhc@1560000 {
 181                         compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 182                         reg = <0x0 0x1560000 0x0 0x10000>;
 183                         interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 184                         clock-frequency = <0>;
 185                         voltage-ranges = <1800 1800 3300 3300>;
 186                         sdhci,auto-cmd12;
 187                         big-endian;
 188                         bus-width = <4>;
 189                         status = "disabled";
 190                 };
 191
 192                 sata: sata@3200000 {
 193                         compatible = "fsl,ls1021a-ahci";
 194                         reg = <0x0 0x3200000 0x0 0x10000>,
 195                               <0x0 0x20220520 0x0 0x4>;
 196                         reg-names = "ahci", "sata-ecc";
 197                         interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 198                         clocks = <&clockgen 4 1>;
 199                         dma-coherent;
 200                         status = "disabled";
 201                 };
 202
 203                 scfg: scfg@1570000 {
 204                         compatible = "fsl,ls1021a-scfg", "syscon";
 205                         reg = <0x0 0x1570000 0x0 0x10000>;
 206                         big-endian;
 207                 };
 208
 209                 crypto: crypto@1700000 {
 210                         compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
 211                         fsl,sec-era = <7>;
 212                         #address-cells = <1>;
 213                         #size-cells = <1>;
 214                         reg              = <0x0 0x1700000 0x0 0x100000>;
 215                         ranges           = <0x0 0x0 0x1700000 0x100000>;
 216                         interrupts       = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
 217
 218                         sec_jr0: jr@10000 {
 219                                 compatible = "fsl,sec-v5.0-job-ring",
 220                                      "fsl,sec-v4.0-job-ring";
 221                                 reg = <0x10000 0x10000>;
 222                                 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
 223                         };
 224
 225                         sec_jr1: jr@20000 {
 226                                 compatible = "fsl,sec-v5.0-job-ring",
 227                                      "fsl,sec-v4.0-job-ring";
 228                                 reg = <0x20000 0x10000>;
 229                                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 230                         };
 231
 232                         sec_jr2: jr@30000 {
 233                                 compatible = "fsl,sec-v5.0-job-ring",
 234                                      "fsl,sec-v4.0-job-ring";
 235                                 reg = <0x30000 0x10000>;
 236                                 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 237                         };
 238
 239                         sec_jr3: jr@40000 {
 240                                 compatible = "fsl,sec-v5.0-job-ring",
 241                                      "fsl,sec-v4.0-job-ring";
 242                                 reg = <0x40000 0x10000>;
 243                                 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 244                         };
 245
 246                 };
 247
 248                 clockgen: clocking@1ee1000 {
 249                         compatible = "fsl,ls1021a-clockgen";
 250                         reg = <0x0 0x1ee1000 0x0 0x1000>;
 251                         #clock-cells = <2>;
 252                         clocks = <&sysclk>;
 253                 };
 254
 255                 tmu: tmu@1f00000 {
 256                         compatible = "fsl,qoriq-tmu";
 257                         reg = <0x0 0x1f00000 0x0 0x10000>;
 258                         interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 259                         fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x30061>;
 260                         fsl,tmu-calibration = <0x00000000 0x0000000f
 261                                                0x00000001 0x00000017
 262                                                0x00000002 0x0000001e
 263                                                0x00000003 0x00000026
 264                                                0x00000004 0x0000002e
 265                                                0x00000005 0x00000035
 266                                                0x00000006 0x0000003d
 267                                                0x00000007 0x00000044
 268                                                0x00000008 0x0000004c
 269                                                0x00000009 0x00000053
 270                                                0x0000000a 0x0000005b
 271                                                0x0000000b 0x00000064
 272
 273                                                0x00010000 0x00000011
 274                                                0x00010001 0x0000001c
 275                                                0x00010002 0x00000024
 276                                                0x00010003 0x0000002b
 277                                                0x00010004 0x00000034
 278                                                0x00010005 0x00000039
 279                                                0x00010006 0x00000042
 280                                                0x00010007 0x0000004c
 281                                                0x00010008 0x00000051
 282                                                0x00010009 0x0000005a
 283                                                0x0001000a 0x00000063
 284
 285                                                0x00020000 0x00000013
 286                                                0x00020001 0x00000019
 287                                                0x00020002 0x00000024
 288                                                0x00020003 0x0000002c
 289                                                0x00020004 0x00000035
 290                                                0x00020005 0x0000003d
 291                                                0x00020006 0x00000046
 292                                                0x00020007 0x00000050
 293                                                0x00020008 0x00000059
 294
 295                                                0x00030000 0x00000002
 296                                                0x00030001 0x0000000d
 297                                                0x00030002 0x00000019
 298                                                0x00030003 0x00000024>;
 299                         #thermal-sensor-cells = <1>;
 300                 };
 301
 302                 thermal-zones {
 303                         cpu_thermal: cpu-thermal {
 304                                 polling-delay-passive = <1000>;
 305                                 polling-delay = <5000>;
 306
 307                                 thermal-sensors = <&tmu 0>;
 308
 309                                 trips {
 310                                         cpu_alert: cpu-alert {
 311                                                 temperature = <85000>;
 312                                                 hysteresis = <2000>;
 313                                                 type = "passive";
 314                                         };
 315                                         cpu_crit: cpu-crit {
 316                                                 temperature = <95000>;
 317                                                 hysteresis = <2000>;
 318                                                 type = "critical";
 319                                         };
 320                                 };
 321
 322                                 cooling-maps {
 323                                         map0 {
 324                                                 trip = <&cpu_alert>;
 325                                                 cooling-device =
 326                                                         <&cpu0 THERMAL_NO_LIMIT
 327                                                         THERMAL_NO_LIMIT>;
 328                                         };
 329                                 };
 330                         };
 331                 };
 332
 333                 dspi0: dspi@2100000 {
 334                         compatible = "fsl,ls1021a-v1.0-dspi";
 335                         #address-cells = <1>;
 336                         #size-cells = <0>;
 337                         reg = <0x0 0x2100000 0x0 0x10000>;
 338                         interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
 339                         clock-names = "dspi";
 340                         clocks = <&clockgen 4 1>;
 341                         spi-num-chipselects = <6>;
 342                         big-endian;
 343                         status = "disabled";
 344                 };
 345
 346                 dspi1: dspi@2110000 {
 347                         compatible = "fsl,ls1021a-v1.0-dspi";
 348                         #address-cells = <1>;
 349                         #size-cells = <0>;
 350                         reg = <0x0 0x2110000 0x0 0x10000>;
 351                         interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 352                         clock-names = "dspi";
 353                         clocks = <&clockgen 4 1>;
 354                         spi-num-chipselects = <6>;
 355                         big-endian;
 356                         status = "disabled";
 357                 };
 358
 359                 i2c0: i2c@2180000 {
 360                         compatible = "fsl,vf610-i2c";
 361                         #address-cells = <1>;
 362                         #size-cells = <0>;
 363                         reg = <0x0 0x2180000 0x0 0x10000>;
 364                         interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
 365                         clock-names = "i2c";
 366                         clocks = <&clockgen 4 1>;
 367                         status = "disabled";
 368                 };
 369
 370                 i2c1: i2c@2190000 {
 371                         compatible = "fsl,vf610-i2c";
 372                         #address-cells = <1>;
 373                         #size-cells = <0>;
 374                         reg = <0x0 0x2190000 0x0 0x10000>;
 375                         interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 376                         clock-names = "i2c";
 377                         clocks = <&clockgen 4 1>;
 378                         status = "disabled";
 379                 };
 380
 381                 i2c2: i2c@21a0000 {
 382                         compatible = "fsl,vf610-i2c";
 383                         #address-cells = <1>;
 384                         #size-cells = <0>;
 385                         reg = <0x0 0x21a0000 0x0 0x10000>;
 386                         interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
 387                         clock-names = "i2c";
 388                         clocks = <&clockgen 4 1>;
 389                         status = "disabled";
 390                 };
 391
 392                 uart0: serial@21c0500 {
 393                         compatible = "fsl,16550-FIFO64", "ns16550a";
 394                         reg = <0x0 0x21c0500 0x0 0x100>;
 395                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 396                         clock-frequency = <0>;
 397                         fifo-size = <15>;
 398                         status = "disabled";
 399                 };
 400
 401                 uart1: serial@21c0600 {
 402                         compatible = "fsl,16550-FIFO64", "ns16550a";
 403                         reg = <0x0 0x21c0600 0x0 0x100>;
 404                         interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 405                         clock-frequency = <0>;
 406                         fifo-size = <15>;
 407                         status = "disabled";
 408                 };
 409
 410                 uart2: serial@21d0500 {
 411                         compatible = "fsl,16550-FIFO64", "ns16550a";
 412                         reg = <0x0 0x21d0500 0x0 0x100>;
 413                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 414                         clock-frequency = <0>;
 415                         fifo-size = <15>;
 416                         status = "disabled";
 417                 };
 418
 419                 uart3: serial@21d0600 {
 420                         compatible = "fsl,16550-FIFO64", "ns16550a";
 421                         reg = <0x0 0x21d0600 0x0 0x100>;
 422                         interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
 423                         clock-frequency = <0>;
 424                         fifo-size = <15>;
 425                         status = "disabled";
 426                 };
 427
 428                 gpio0: gpio@2300000 {
 429                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 430                         reg = <0x0 0x2300000 0x0 0x10000>;
 431                         interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 432                         gpio-controller;
 433                         #gpio-cells = <2>;
 434                         interrupt-controller;
 435                         #interrupt-cells = <2>;
 436                 };
 437
 438                 gpio1: gpio@2310000 {
 439                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 440                         reg = <0x0 0x2310000 0x0 0x10000>;
 441                         interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 442                         gpio-controller;
 443                         #gpio-cells = <2>;
 444                         interrupt-controller;
 445                         #interrupt-cells = <2>;
 446                 };
 447
 448                 gpio2: gpio@2320000 {
 449                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 450                         reg = <0x0 0x2320000 0x0 0x10000>;
 451                         interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 452                         gpio-controller;
 453                         #gpio-cells = <2>;
 454                         interrupt-controller;
 455                         #interrupt-cells = <2>;
 456                 };
 457
 458                 gpio3: gpio@2330000 {
 459                         compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
 460                         reg = <0x0 0x2330000 0x0 0x10000>;
 461                         interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>;
 462                         gpio-controller;
 463                         #gpio-cells = <2>;
 464                         interrupt-controller;
 465                         #interrupt-cells = <2>;
 466                 };
 467
 468                 lpuart0: serial@2950000 {
 469                         compatible = "fsl,ls1021a-lpuart";
 470                         reg = <0x0 0x2950000 0x0 0x1000>;
 471                         interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 472                         clocks = <&sysclk>;
 473                         clock-names = "ipg";
 474                         status = "disabled";
 475                 };
 476
 477                 lpuart1: serial@2960000 {
 478                         compatible = "fsl,ls1021a-lpuart";
 479                         reg = <0x0 0x2960000 0x0 0x1000>;
 480                         interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
 481                         clocks = <&clockgen 4 1>;
 482                         clock-names = "ipg";
 483                         status = "disabled";
 484                 };
 485
 486                 lpuart2: serial@2970000 {
 487                         compatible = "fsl,ls1021a-lpuart";
 488                         reg = <0x0 0x2970000 0x0 0x1000>;
 489                         interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 490                         clocks = <&clockgen 4 1>;
 491                         clock-names = "ipg";
 492                         status = "disabled";
 493                 };
 494
 495                 lpuart3: serial@2980000 {
 496                         compatible = "fsl,ls1021a-lpuart";
 497                         reg = <0x0 0x2980000 0x0 0x1000>;
 498                         interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 499                         clocks = <&clockgen 4 1>;
 500                         clock-names = "ipg";
 501                         status = "disabled";
 502                 };
 503
 504                 lpuart4: serial@2990000 {
 505                         compatible = "fsl,ls1021a-lpuart";
 506                         reg = <0x0 0x2990000 0x0 0x1000>;
 507                         interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
 508                         clocks = <&clockgen 4 1>;
 509                         clock-names = "ipg";
 510                         status = "disabled";
 511                 };
 512
 513                 lpuart5: serial@29a0000 {
 514                         compatible = "fsl,ls1021a-lpuart";
 515                         reg = <0x0 0x29a0000 0x0 0x1000>;
 516                         interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 517                         clocks = <&clockgen 4 1>;
 518                         clock-names = "ipg";
 519                         status = "disabled";
 520                 };
 521
 522                 wdog0: watchdog@2ad0000 {
 523                         compatible = "fsl,imx21-wdt";
 524                         reg = <0x0 0x2ad0000 0x0 0x10000>;
 525                         interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 526                         clocks = <&clockgen 4 1>;
 527                         clock-names = "wdog-en";
 528                         big-endian;
 529                 };
 530
 531                 sai1: sai@2b50000 {
 532                         #sound-dai-cells = <0>;
 533                         compatible = "fsl,vf610-sai";
 534                         reg = <0x0 0x2b50000 0x0 0x10000>;
 535                         interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 536                         clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 537                                  <&clockgen 4 1>, <&clockgen 4 1>;
 538                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 539                         dma-names = "tx", "rx";
 540                         dmas = <&edma0 1 47>,
 541                                <&edma0 1 46>;
 542                         status = "disabled";
 543                 };
 544
 545                 sai2: sai@2b60000 {
 546                         #sound-dai-cells = <0>;
 547                         compatible = "fsl,vf610-sai";
 548                         reg = <0x0 0x2b60000 0x0 0x10000>;
 549                         interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 550                         clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 551                                  <&clockgen 4 1>, <&clockgen 4 1>;
 552                         clock-names = "bus", "mclk1", "mclk2", "mclk3";
 553                         dma-names = "tx", "rx";
 554                         dmas = <&edma0 1 45>,
 555                                <&edma0 1 44>;
 556                         status = "disabled";
 557                 };
 558
 559                 edma0: edma@2c00000 {
 560                         #dma-cells = <2>;
 561                         compatible = "fsl,vf610-edma";
 562                         reg = <0x0 0x2c00000 0x0 0x10000>,
 563                               <0x0 0x2c10000 0x0 0x10000>,
 564                               <0x0 0x2c20000 0x0 0x10000>;
 565                         interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
 566                                      <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
 567                         interrupt-names = "edma-tx", "edma-err";
 568                         dma-channels = <32>;
 569                         big-endian;
 570                         clock-names = "dmamux0", "dmamux1";
 571                         clocks = <&clockgen 4 1>,
 572                                  <&clockgen 4 1>;
 573                 };
 574
 575                 dcu: dcu@2ce0000 {
 576                         compatible = "fsl,ls1021a-dcu";
 577                         reg = <0x0 0x2ce0000 0x0 0x10000>;
 578                         interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
 579                         clocks = <&clockgen 4 0>,
 580                                 <&clockgen 4 0>;
 581                         clock-names = "dcu", "pix";
 582                         big-endian;
 583                         status = "disabled";
 584                 };
 585
 586                 mdio0: mdio@2d24000 {
 587                         compatible = "gianfar";
 588                         device_type = "mdio";
 589                         #address-cells = <1>;
 590                         #size-cells = <0>;
 591                         reg = <0x0 0x2d24000 0x0 0x4000>,
 592                               <0x0 0x2d10030 0x0 0x4>;
 593                 };
 594
 595                 ptp_clock@2d10e00 {
 596                         compatible = "fsl,etsec-ptp";
 597                         reg = <0x0 0x2d10e00 0x0 0xb0>;
 598                         interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
 599                         fsl,tclk-period = <5>;
 600                         fsl,tmr-prsc    = <2>;
 601                         fsl,tmr-add     = <0xaaaaaaab>;
 602                         fsl,tmr-fiper1  = <999999995>;
 603                         fsl,tmr-fiper2  = <99990>;
 604                         fsl,max-adj     = <499999999>;
 605                 };
 606
 607                 enet0: ethernet@2d10000 {
 608                         compatible = "fsl,etsec2";
 609                         device_type = "network";
 610                         #address-cells = <2>;
 611                         #size-cells = <2>;
 612                         interrupt-parent = <&gic>;
 613                         model = "eTSEC";
 614                         fsl,magic-packet;
 615                         ranges;
 616                         dma-coherent;
 617
 618                         queue-group@2d10000 {
 619                                 #address-cells = <2>;
 620                                 #size-cells = <2>;
 621                                 reg = <0x0 0x2d10000 0x0 0x1000>;
 622                                 interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 623                                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
 624                                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
 625                         };
 626
 627                         queue-group@2d14000  {
 628                                 #address-cells = <2>;
 629                                 #size-cells = <2>;
 630                                 reg = <0x0 0x2d14000 0x0 0x1000>;
 631                                 interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 632                                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
 633                                         <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
 634                         };
 635                 };
 636
 637                 enet1: ethernet@2d50000 {
 638                         compatible = "fsl,etsec2";
 639                         device_type = "network";
 640                         #address-cells = <2>;
 641                         #size-cells = <2>;
 642                         interrupt-parent = <&gic>;
 643                         model = "eTSEC";
 644                         ranges;
 645                         dma-coherent;
 646
 647                         queue-group@2d50000  {
 648                                 #address-cells = <2>;
 649                                 #size-cells = <2>;
 650                                 reg = <0x0 0x2d50000 0x0 0x1000>;
 651                                 interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 652                                         <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 653                                         <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 654                         };
 655
 656                         queue-group@2d54000  {
 657                                 #address-cells = <2>;
 658                                 #size-cells = <2>;
 659                                 reg = <0x0 0x2d54000 0x0 0x1000>;
 660                                 interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 661                                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
 662                                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 663                         };
 664                 };
 665
 666                 enet2: ethernet@2d90000 {
 667                         compatible = "fsl,etsec2";
 668                         device_type = "network";
 669                         #address-cells = <2>;
 670                         #size-cells = <2>;
 671                         interrupt-parent = <&gic>;
 672                         model = "eTSEC";
 673                         ranges;
 674                         dma-coherent;
 675
 676                         queue-group@2d90000  {
 677                                 #address-cells = <2>;
 678                                 #size-cells = <2>;
 679                                 reg = <0x0 0x2d90000 0x0 0x1000>;
 680                                 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 681                                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 682                                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 683                         };
 684
 685                         queue-group@2d94000  {
 686                                 #address-cells = <2>;
 687                                 #size-cells = <2>;
 688                                 reg = <0x0 0x2d94000 0x0 0x1000>;
 689                                 interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 690                                         <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
 691                                         <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
 692                         };
 693                 };
 694
 695                 usb2: usb@8600000 {
 696                         compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
 697                         reg = <0x0 0x8600000 0x0 0x1000>;
 698                         interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
 699                         dr_mode = "host";
 700                         phy_type = "ulpi";
 701                 };
 702
 703                 usb3: usb3@3100000 {
 704                         compatible = "snps,dwc3";
 705                         reg = <0x0 0x3100000 0x0 0x10000>;
 706                         interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
 707                         dr_mode = "host";
 708                         snps,quirk-frame-length-adjustment = <0x20>;
 709                         snps,dis_rxdet_inp3_quirk;
 710                 };
 711
 712                 pcie@3400000 {
 713                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 714                         reg = <0x00 0x03400000 0x0 0x00010000   /* controller registers */
 715                                0x40 0x00000000 0x0 0x00002000>; /* configuration space */
 716                         reg-names = "regs", "config";
 717                         interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
 718                         fsl,pcie-scfg = <&scfg 0>;
 719                         #address-cells = <3>;
 720                         #size-cells = <2>;
 721                         device_type = "pci";
 722                         num-lanes = <4>;
 723                         bus-range = <0x0 0xff>;
 724                         ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000   /* downstream I/O */
 725                                   0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 726                         msi-parent = <&msi1>, <&msi2>;
 727                         #interrupt-cells = <1>;
 728                         interrupt-map-mask = <0 0 0 7>;
 729                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 91  IRQ_TYPE_LEVEL_HIGH>,
 730                                         <0000 0 0 2 &gic GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
 731                                         <0000 0 0 3 &gic GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
 732                                         <0000 0 0 4 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 733                 };
 734
 735                 pcie@3500000 {
 736                         compatible = "fsl,ls1021a-pcie", "snps,dw-pcie";
 737                         reg = <0x00 0x03500000 0x0 0x00010000   /* controller registers */
 738                                0x48 0x00000000 0x0 0x00002000>; /* configuration space */
 739                         reg-names = "regs", "config";
 740                         interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
 741                         fsl,pcie-scfg = <&scfg 1>;
 742                         #address-cells = <3>;
 743                         #size-cells = <2>;
 744                         device_type = "pci";
 745                         num-lanes = <4>;
 746                         bus-range = <0x0 0xff>;
 747                         ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000   /* downstream I/O */
 748                                   0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 749                         msi-parent = <&msi1>, <&msi2>;
 750                         #interrupt-cells = <1>;
 751                         interrupt-map-mask = <0 0 0 7>;
 752                         interrupt-map = <0000 0 0 1 &gic GIC_SPI 92  IRQ_TYPE_LEVEL_HIGH>,
 753                                         <0000 0 0 2 &gic GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
 754                                         <0000 0 0 3 &gic GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
 755                                         <0000 0 0 4 &gic GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
 756                 };
 757
 758                 can0: can@2a70000 {
 759                         compatible = "fsl,ls1021ar2-flexcan";
 760                         reg = <0x0 0x2a70000 0x0 0x1000>;
 761                         interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
 762                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 763                         clock-names = "ipg", "per";
 764                         big-endian;
 765                 };
 766
 767                 can1: can@2a80000 {
 768                         compatible = "fsl,ls1021ar2-flexcan";
 769                         reg = <0x0 0x2a80000 0x0 0x1000>;
 770                         interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
 771                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 772                         clock-names = "ipg", "per";
 773                         big-endian;
 774                 };
 775
 776                 can2: can@2a90000 {
 777                         compatible = "fsl,ls1021ar2-flexcan";
 778                         reg = <0x0 0x2a90000 0x0 0x1000>;
 779                         interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
 780                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 781                         clock-names = "ipg", "per";
 782                         big-endian;
 783                 };
 784
 785                 can3: can@2aa0000 {
 786                         compatible = "fsl,ls1021ar2-flexcan";
 787                         reg = <0x0 0x2aa0000 0x0 0x1000>;
 788                         interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
 789                         clocks = <&clockgen 4 1>, <&clockgen 4 1>;
 790                         clock-names = "ipg", "per";
 791                         big-endian;
 792                 };
 793
 794                 ocram1: sram@10000000 {
 795                         compatible = "mmio-sram";
 796                         reg = <0x0 0x10000000 0x0 0x10000>;
 797                         #address-cells = <1>;
 798                         #size-cells = <1>;
 799                         ranges = <0x0 0x0 0x10000000 0x10000>;
 800                 };
 801
 802                 ocram2: sram@10010000 {
 803                         compatible = "mmio-sram";
 804                         reg = <0x0 0x10010000 0x0 0x10000>;
 805                         #address-cells = <1>;
 806                         #size-cells = <1>;
 807                         ranges = <0x0 0x0 0x10010000 0x10000>;
 808                 };
 809         };
 810 };