3 #include "kirkwood.dtsi"
4 #include "kirkwood-6281.dtsi"
7 model = "Seagate GoFlex Net";
8 compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
11 device_type = "memory";
12 reg = <0x00000000 0x8000000>;
16 bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
20 pinctrl: pinctrl@10000 {
21 pmx_usb_power_enable: pmx-usb-power-enable {
22 marvell,pins = "mpp29";
23 marvell,function = "gpio";
25 pmx_led_right_cap_0: pmx-led_right_cap_0 {
26 marvell,pins = "mpp38";
27 marvell,function = "gpio";
29 pmx_led_right_cap_1: pmx-led_right_cap_1 {
30 marvell,pins = "mpp39";
31 marvell,function = "gpio";
33 pmx_led_right_cap_2: pmx-led_right_cap_2 {
34 marvell,pins = "mpp40";
35 marvell,function = "gpio";
37 pmx_led_right_cap_3: pmx-led_right_cap_3 {
38 marvell,pins = "mpp41";
39 marvell,function = "gpio";
41 pmx_led_left_cap_0: pmx-led_left_cap_0 {
42 marvell,pins = "mpp42";
43 marvell,function = "gpio";
45 pmx_led_left_cap_1: pmx-led_left_cap_1 {
46 marvell,pins = "mpp43";
47 marvell,function = "gpio";
49 pmx_led_left_cap_2: pmx-led_left_cap_2 {
50 marvell,pins = "mpp44";
51 marvell,function = "gpio";
53 pmx_led_left_cap_3: pmx-led_left_cap_3 {
54 marvell,pins = "mpp45";
55 marvell,function = "gpio";
57 pmx_led_green: pmx-led_green {
58 marvell,pins = "mpp46";
59 marvell,function = "gpio";
61 pmx_led_orange: pmx-led_orange {
62 marvell,pins = "mpp47";
63 marvell,function = "gpio";
77 compatible = "gpio-leds";
78 pinctrl-0 = < &pmx_led_orange
79 &pmx_led_left_cap_0 &pmx_led_left_cap_1
80 &pmx_led_left_cap_2 &pmx_led_left_cap_3
81 &pmx_led_right_cap_0 &pmx_led_right_cap_1
82 &pmx_led_right_cap_2 &pmx_led_right_cap_3
84 pinctrl-names = "default";
87 label = "status:green:health";
88 gpios = <&gpio1 14 1>;
89 linux,default-trigger = "default-on";
92 label = "status:orange:fault";
93 gpios = <&gpio1 15 1>;
96 label = "status:white:left0";
97 gpios = <&gpio1 10 0>;
100 label = "status:white:left1";
101 gpios = <&gpio1 11 0>;
104 label = "status:white:left2";
105 gpios = <&gpio1 12 0>;
108 label = "status:white:left3";
109 gpios = <&gpio1 13 0>;
112 label = "status:white:right0";
113 gpios = <&gpio1 6 0>;
116 label = "status:white:right1";
117 gpios = <&gpio1 7 0>;
120 label = "status:white:right2";
121 gpios = <&gpio1 8 0>;
124 label = "status:white:right3";
125 gpios = <&gpio1 9 0>;
129 compatible = "simple-bus";
130 #address-cells = <1>;
132 pinctrl-0 = <&pmx_usb_power_enable>;
133 pinctrl-names = "default";
135 usb_power: regulator@1 {
136 compatible = "regulator-fixed";
138 regulator-name = "USB Power";
139 regulator-min-microvolt = <5000000>;
140 regulator-max-microvolt = <5000000>;
144 gpio = <&gpio0 29 0>;
155 reg = <0x0000000 0x100000>;
161 reg = <0x0100000 0x400000>;
166 reg = <0x0500000 0x2000000>;
171 reg = <0x02500000 0xd800000>;
178 ethphy0: ethernet-phy@0 {
179 device_type = "ethernet-phy";
187 phy-handle = <ðphy0>;