arch/arm/boot/dts/imx27.dtsi

   1 /*
   2  * Copyright 2012 Sascha Hauer, Pengutronix
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 /include/ "skeleton.dtsi"
  13
  14 / {
  15         aliases {
  16                 serial0 = &uart1;
  17                 serial1 = &uart2;
  18                 serial2 = &uart3;
  19                 serial3 = &uart4;
  20                 serial4 = &uart5;
  21                 serial5 = &uart6;
  22                 gpio0 = &gpio1;
  23                 gpio1 = &gpio2;
  24                 gpio2 = &gpio3;
  25                 gpio3 = &gpio4;
  26                 gpio4 = &gpio5;
  27                 gpio5 = &gpio6;
  28         };
  29
  30         avic: avic-interrupt-controller@e0000000 {
  31                 compatible = "fsl,imx27-avic", "fsl,avic";
  32                 interrupt-controller;
  33                 #interrupt-cells = <1>;
  34                 reg = <0x10040000 0x1000>;
  35         };
  36
  37         clocks {
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40
  41                 osc26m {
  42                         compatible = "fsl,imx-osc26m", "fixed-clock";
  43                         clock-frequency = <26000000>;
  44                 };
  45         };
  46
  47         soc {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "simple-bus";
  51                 interrupt-parent = <&avic>;
  52                 ranges;
  53
  54                 aipi@10000000 { /* AIPI1 */
  55                         compatible = "fsl,aipi-bus", "simple-bus";
  56                         #address-cells = <1>;
  57                         #size-cells = <1>;
  58                         reg = <0x10000000 0x10000000>;
  59                         ranges;
  60
  61                         wdog@10002000 {
  62                                 compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
  63                                 reg = <0x10002000 0x4000>;
  64                                 interrupts = <27>;
  65                                 status = "disabled";
  66                         };
  67
  68                         uart1: serial@1000a000 {
  69                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  70                                 reg = <0x1000a000 0x1000>;
  71                                 interrupts = <20>;
  72                                 status = "disabled";
  73                         };
  74
  75                         uart2: serial@1000b000 {
  76                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  77                                 reg = <0x1000b000 0x1000>;
  78                                 interrupts = <19>;
  79                                 status = "disabled";
  80                         };
  81
  82                         uart3: serial@1000c000 {
  83                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  84                                 reg = <0x1000c000 0x1000>;
  85                                 interrupts = <18>;
  86                                 status = "disabled";
  87                         };
  88
  89                         uart4: serial@1000d000 {
  90                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
  91                                 reg = <0x1000d000 0x1000>;
  92                                 interrupts = <17>;
  93                                 status = "disabled";
  94                         };
  95
  96                         cspi1: cspi@1000e000 {
  97                                 #address-cells = <1>;
  98                                 #size-cells = <0>;
  99                                 compatible = "fsl,imx27-cspi";
 100                                 reg = <0x1000e000 0x1000>;
 101                                 interrupts = <16>;
 102                                 status = "disabled";
 103                         };
 104
 105                         cspi2: cspi@1000f000 {
 106                                 #address-cells = <1>;
 107                                 #size-cells = <0>;
 108                                 compatible = "fsl,imx27-cspi";
 109                                 reg = <0x1000f000 0x1000>;
 110                                 interrupts = <15>;
 111                                 status = "disabled";
 112                         };
 113
 114                         i2c1: i2c@10012000 {
 115                                 #address-cells = <1>;
 116                                 #size-cells = <0>;
 117                                 compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
 118                                 reg = <0x10012000 0x1000>;
 119                                 interrupts = <12>;
 120                                 status = "disabled";
 121                         };
 122
 123                         gpio1: gpio@10015000 {
 124                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 125                                 reg = <0x10015000 0x100>;
 126                                 interrupts = <8>;
 127                                 gpio-controller;
 128                                 #gpio-cells = <2>;
 129                                 interrupt-controller;
 130                                 #interrupt-cells = <2>;
 131                         };
 132
 133                         gpio2: gpio@10015100 {
 134                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 135                                 reg = <0x10015100 0x100>;
 136                                 interrupts = <8>;
 137                                 gpio-controller;
 138                                 #gpio-cells = <2>;
 139                                 interrupt-controller;
 140                                 #interrupt-cells = <2>;
 141                         };
 142
 143                         gpio3: gpio@10015200 {
 144                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 145                                 reg = <0x10015200 0x100>;
 146                                 interrupts = <8>;
 147                                 gpio-controller;
 148                                 #gpio-cells = <2>;
 149                                 interrupt-controller;
 150                                 #interrupt-cells = <2>;
 151                         };
 152
 153                         gpio4: gpio@10015300 {
 154                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 155                                 reg = <0x10015300 0x100>;
 156                                 interrupts = <8>;
 157                                 gpio-controller;
 158                                 #gpio-cells = <2>;
 159                                 interrupt-controller;
 160                                 #interrupt-cells = <2>;
 161                         };
 162
 163                         gpio5: gpio@10015400 {
 164                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 165                                 reg = <0x10015400 0x100>;
 166                                 interrupts = <8>;
 167                                 gpio-controller;
 168                                 #gpio-cells = <2>;
 169                                 interrupt-controller;
 170                                 #interrupt-cells = <2>;
 171                         };
 172
 173                         gpio6: gpio@10015500 {
 174                                 compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
 175                                 reg = <0x10015500 0x100>;
 176                                 interrupts = <8>;
 177                                 gpio-controller;
 178                                 #gpio-cells = <2>;
 179                                 interrupt-controller;
 180                                 #interrupt-cells = <2>;
 181                         };
 182
 183                         cspi3: cspi@10017000 {
 184                                 #address-cells = <1>;
 185                                 #size-cells = <0>;
 186                                 compatible = "fsl,imx27-cspi";
 187                                 reg = <0x10017000 0x1000>;
 188                                 interrupts = <6>;
 189                                 status = "disabled";
 190                         };
 191
 192                         uart5: serial@1001b000 {
 193                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 194                                 reg = <0x1001b000 0x1000>;
 195                                 interrupts = <49>;
 196                                 status = "disabled";
 197                         };
 198
 199                         uart6: serial@1001c000 {
 200                                 compatible = "fsl,imx27-uart", "fsl,imx21-uart";
 201                                 reg = <0x1001c000 0x1000>;
 202                                 interrupts = <48>;
 203                                 status = "disabled";
 204                         };
 205
 206                         i2c2: i2c@1001d000 {
 207                                 #address-cells = <1>;
 208                                 #size-cells = <0>;
 209                                 compatible = "fsl,imx27-i2c", "fsl,imx1-i2c";
 210                                 reg = <0x1001d000 0x1000>;
 211                                 interrupts = <1>;
 212                                 status = "disabled";
 213                         };
 214
 215                         fec: ethernet@1002b000 {
 216                                 compatible = "fsl,imx27-fec";
 217                                 reg = <0x1002b000 0x4000>;
 218                                 interrupts = <50>;
 219                                 status = "disabled";
 220                         };
 221                 };
 222                 nand@d8000000 {
 223                         #address-cells = <1>;
 224                         #size-cells = <1>;
 225
 226                         compatible = "fsl,imx27-nand";
 227                         reg = <0xd8000000 0x1000>;
 228                         interrupts = <29>;
 229                         status = "disabled";
 230                 };
 231         };
 232 };