ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act

[platform/kernel/linux-rpi.git] / arch / arm / Kconfig.debug

# SPDX-License-Identifier: GPL-2.0

config ARM_PTDUMP_CORE
        def_bool n

config ARM_PTDUMP_DEBUGFS
        bool "Export kernel pagetable layout to userspace via debugfs"
        depends on DEBUG_KERNEL
        depends on MMU
        select ARM_PTDUMP_CORE
        select DEBUG_FS
        help
          Say Y here if you want to show the kernel pagetable layout in a
          debugfs file. This information is only useful for kernel developers
          who are working in architecture specific areas of the kernel.
          It is probably not a good idea to enable this feature in a production
          kernel.
          If in doubt, say "N"

config DEBUG_WX
        bool "Warn on W+X mappings at boot"
        depends on MMU
        select ARM_PTDUMP_CORE
        help
                Generate a warning if any W+X mappings are found at boot.

                This is useful for discovering cases where the kernel is leaving
                W+X mappings after applying NX, as such mappings are a security risk.

                Look for a message in dmesg output like this:

                        arm/mm: Checked W+X mappings: passed, no W+X pages found.

                or like this, if the check failed:

                        arm/mm: Checked W+X mappings: FAILED, <N> W+X pages found.

                Note that even if the check fails, your kernel is possibly
                still fine, as W+X mappings are not a security hole in
                themselves, what they do is that they make the exploitation
                of other unfixed kernel bugs easier.

                There is no runtime or memory usage effect of this option
                once the kernel has booted up - it's a one time check.

                If in doubt, say "Y".

choice
        prompt "Choose kernel unwinder"
        default UNWINDER_ARM if AEABI
        default UNWINDER_FRAME_POINTER if !AEABI
        help
          This determines which method will be used for unwinding kernel stack
          traces for panics, oopses, bugs, warnings, perf, /proc/<pid>/stack,
          livepatch, lockdep, and more.

config UNWINDER_FRAME_POINTER
        bool "Frame pointer unwinder"
        depends on !THUMB2_KERNEL
        select ARCH_WANT_FRAME_POINTERS
        select FRAME_POINTER
        help
          This option enables the frame pointer unwinder for unwinding
          kernel stack traces.

config UNWINDER_ARM
        bool "ARM EABI stack unwinder"
        depends on AEABI
        select ARM_UNWIND
        help
          This option enables stack unwinding support in the kernel
          using the information automatically generated by the
          compiler. The resulting kernel image is slightly bigger but
          the performance is not affected. Currently, this feature
          only works with EABI compilers.

endchoice

config ARM_UNWIND
        bool

config BACKTRACE_VERBOSE
        bool "Verbose backtrace"
        depends on EXPERT
        help
          When the kernel produces a warning or oops, the kernel prints a
          trace of the call chain. This option controls whether we include
          the numeric addresses or only include the symbolic information.

          In most cases, say N here, unless you are intending to debug the
          kernel and have access to the kernel binary image.

config FRAME_POINTER
        bool

config DEBUG_USER
        bool "Verbose user fault messages"
        help
          When a user program crashes due to an exception, the kernel can
          print a brief message explaining what the problem was. This is
          sometimes helpful for debugging but serves no purpose on a
          production system. Most people should say N here.

          In addition, you need to pass user_debug=N on the kernel command
          line to enable this feature.  N consists of the sum of:

              1 - undefined instruction events
              2 - system calls
              4 - invalid data aborts
              8 - SIGSEGV faults
             16 - SIGBUS faults

# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
        bool "Kernel low-level debugging functions (read help!)"
        depends on DEBUG_KERNEL
        help
          Say Y here to include definitions of printascii, printch, printhex
          in the kernel.  This is helpful if you are debugging code that
          executes before the console is initialized.

          Note that selecting this option will limit the kernel to a single
          UART definition, as specified below. Attempting to boot the kernel
          image on a different platform *will not work*, so this option should
          not be enabled for kernels that are intended to be portable.

choice
        prompt "Kernel low-level debugging port"
        depends on DEBUG_LL

        config DEBUG_ALPINE_UART0
                bool "Kernel low-level debugging messages via Alpine UART0"
                depends on ARCH_ALPINE
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Alpine based platforms.

        config DEBUG_ASM9260_UART
                bool "Kernel low-level debugging via asm9260 UART"
                depends on MACH_ASM9260
                help
                  Say Y here if you want the debug print routines to direct
                  their output to an UART or USART port on asm9260 based
                  machines.

                    DEBUG_UART_PHYS | DEBUG_UART_VIRT

                    0x80000000      | 0xf0000000     | UART0
                    0x80004000      | 0xf0004000     | UART1
                    0x80008000      | 0xf0008000     | UART2
                    0x8000c000      | 0xf000c000     | UART3
                    0x80010000      | 0xf0010000     | UART4
                    0x80014000      | 0xf0014000     | UART5
                    0x80018000      | 0xf0018000     | UART6
                    0x8001c000      | 0xf001c000     | UART7
                    0x80020000      | 0xf0020000     | UART8
                    0x80024000      | 0xf0024000     | UART9

        config DEBUG_AT91_RM9200_DBGU
                bool "Kernel low-level debugging on AT91RM9200, AT91SAM9, SAM9X60 DBGU"
                select DEBUG_AT91_UART
                depends on SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60
                help
                  Say Y here if you want kernel low-level debugging support
                  on the DBGU port of:
                    at91rm9200, at91sam9260, at91sam9g20, at91sam9261,
                    at91sam9g10, at91sam9n12, at91sam9rl64, at91sam9x5, sam9x60

        config DEBUG_AT91_SAM9263_DBGU
                bool "Kernel low-level debugging on AT91SAM{9263,9G45,A5D3} DBGU"
                select DEBUG_AT91_UART
                depends on SOC_AT91SAM9 || SOC_SAMA5D3
                help
                  Say Y here if you want kernel low-level debugging support
                  on the DBGU port of:
                    at91sam9263, at91sam9g45, at91sam9m10,
                    sama5d3

        config DEBUG_AT91_SAMA5D2_UART1
                bool "Kernel low-level debugging on SAMA5D2 UART1"
                select DEBUG_AT91_UART
                depends on SOC_SAMA5D2
                help
                  Say Y here if you want kernel low-level debugging support
                  on the UART1 port of sama5d2.

        config DEBUG_AT91_SAMA5D4_USART3
                bool "Kernel low-level debugging on SAMA5D4 USART3"
                select DEBUG_AT91_UART
                depends on SOC_SAMA5D4
                help
                  Say Y here if you want kernel low-level debugging support
                  on the USART3 port of sama5d4.

        config DEBUG_AT91_SAMV7_USART1
                bool "Kernel low-level debugging via SAMV7 USART1"
                select DEBUG_AT91_UART
                depends on SOC_SAMV7
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the USART1 port on SAMV7 based
                  machines.

        config DEBUG_AT91_SAMA7G5_FLEXCOM3
                bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
                select DEBUG_AT91_UART
                depends on SOC_SAMA7G5
                help
                  Say Y here if you want kernel low-level debugging support
                  on the FLEXCOM3 port of SAMA7G5.

        config DEBUG_AT91_LAN966_FLEXCOM
                bool "Kernel low-level debugging on LAN966 FLEXCOM USART"
                select DEBUG_AT91_UART
                depends on SOC_LAN966
                help
                Say Y here if you want kernel low-level debugging support
                on the FLEXCOM port of LAN966.

                DEBUG_UART_PHYS | DEBUG_UART_VIRT

                0xe0040200      | 0xfd040200     | FLEXCOM0
                0xe0044200      | 0xfd044200     | FLEXCOM1
                0xe0060200      | 0xfd060200     | FLEXCOM2
                0xe0064200      | 0xfd064200     | FLEXCOM3
                0xe0070200      | 0xfd070200     | FLEXCOM4

                By default, enabling FLEXCOM3 port. Based on requirement, use
                DEBUG_UART_PHYS and DEBUG_UART_VIRT configurations from above
                table.

        config DEBUG_BCM2835
                bool "Kernel low-level debugging on BCM2835 PL011 UART"
                depends on ARCH_BCM2835 && ARCH_MULTI_V6
                select DEBUG_UART_PL01X

        config DEBUG_BCM2836
                bool "Kernel low-level debugging on BCM2836 PL011 UART"
                depends on ARCH_BCM2835 && ARCH_MULTI_V7
                select DEBUG_UART_PL01X

        config DEBUG_BCM_5301X
                bool "Kernel low-level debugging on BCM5301X/NSP UART1"
                depends on ARCH_BCM_5301X || ARCH_BCM_NSP
                select DEBUG_UART_8250

        config DEBUG_BCM_HR2
                bool "Kernel low-level debugging on Hurricane 2 UART2"
                depends on ARCH_BCM_HR2
                select DEBUG_UART_8250

        config DEBUG_BCM_IPROC_UART3
                bool "Kernel low-level debugging on BCM IPROC UART3"
                depends on ARCH_BCM_CYGNUS
                select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the third serial port on these devices.

        config DEBUG_BCM_KONA_UART
                bool "Kernel low-level debugging messages via BCM KONA UART"
                depends on ARCH_BCM_MOBILE
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Broadcom SoC platforms.
                  This low level debug works for Broadcom
                  mobile SoCs in the Kona family of chips (e.g. bcm28155,
                  bcm11351, etc...)

        config DEBUG_BCM63XX_UART
                bool "Kernel low-level debugging on BCM63XX UART"
                depends on ARCH_BCMBCA

        config DEBUG_BERLIN_UART
                bool "Marvell Berlin SoC Debug UART"
                depends on ARCH_BERLIN
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Marvell Berlin SoC based platforms.

        config DEBUG_BRCMSTB_UART
                bool "Use BRCMSTB UART for low-level debug"
                depends on ARCH_BRCMSTB
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the first serial port on these devices. The
                  UART physical and virtual address is automatically provided
                  based on the chip identification register value.

                  If you have a Broadcom STB chip and would like early print
                  messages to appear over the UART, select this option.

        config DEBUG_CLPS711X_UART1
                bool "Kernel low-level debugging messages via UART1"
                depends on ARCH_CLPS711X
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the first serial port on these devices.

        config DEBUG_CLPS711X_UART2
                bool "Kernel low-level debugging messages via UART2"
                depends on ARCH_CLPS711X
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the second serial port on these devices.

        config DEBUG_DAVINCI_DA8XX_UART1
                bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
                depends on ARCH_DAVINCI_DA8XX
                select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART1 serial port on DaVinci DA8XX devices.

        config DEBUG_DAVINCI_DA8XX_UART2
                bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
                depends on ARCH_DAVINCI_DA8XX
                select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART2 serial port on DaVinci DA8XX devices.

        config DEBUG_DC21285_PORT
                bool "Kernel low-level debugging messages via footbridge serial port"
                depends on FOOTBRIDGE
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the serial port in the DC21285 (Footbridge).

        config DEBUG_DIGICOLOR_UA0
                bool "Kernel low-level debugging messages via Digicolor UA0"
                depends on ARCH_DIGICOLOR
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the UA0 serial port in the CX92755.

        config DEBUG_EP93XX
                bool "Kernel low-level debugging messages via ep93xx UART"
                depends on ARCH_EP93XX
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on Cirrus Logic EP93xx based platforms.

        config DEBUG_FOOTBRIDGE_COM1
                bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
                depends on FOOTBRIDGE
                select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the 8250 at PCI COM1.

        config DEBUG_GEMINI
                bool "Kernel low-level debugging messages via Cortina Systems Gemini UART"
                depends on ARCH_GEMINI
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Cortina Gemini based platforms.

        config DEBUG_HI3620_UART
                bool "Hisilicon HI3620 Debug UART"
                depends on ARCH_HI3xxx
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on HI3620 UART.

        config DEBUG_HIGHBANK_UART
                bool "Kernel low-level debugging messages via Highbank UART"
                depends on ARCH_HIGHBANK
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the UART on Highbank based devices.

        config DEBUG_HIP01_UART
                bool "Hisilicon Hip01 Debug UART"
                depends on ARCH_HIP01
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on HIP01 UART.

        config DEBUG_HIP04_UART
                bool "Hisilicon HiP04 Debug UART"
                depends on ARCH_HIP04
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on HIP04 UART.

        config DEBUG_HIX5HD2_UART
                bool "Hisilicon Hix5hd2 Debug UART"
                depends on ARCH_HIX5HD2
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on Hix5hd2 UART.

        config DEBUG_IMX1_UART
                bool "i.MX1 Debug UART"
                depends on SOC_IMX1
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX1.

        config DEBUG_IMX23_UART
                bool "i.MX23 Debug UART"
                depends on SOC_IMX23
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX23.

        config DEBUG_IMX25_UART
                bool "i.MX25 Debug UART"
                depends on SOC_IMX25
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX25.

        config DEBUG_IMX27_UART
                bool "i.MX27 Debug UART"
                depends on SOC_IMX27
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX27.

        config DEBUG_IMX28_UART
                bool "i.MX28 Debug UART"
                depends on SOC_IMX28
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX28.

        config DEBUG_IMX31_UART
                bool "i.MX31 Debug UART"
                depends on SOC_IMX31
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX31.

        config DEBUG_IMX35_UART
                bool "i.MX35 Debug UART"
                depends on SOC_IMX35
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX35.

        config DEBUG_IMX50_UART
                bool "i.MX50 Debug UART"
                depends on SOC_IMX50
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX50.

        config DEBUG_IMX51_UART
                bool "i.MX51 Debug UART"
                depends on SOC_IMX51
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX51.

        config DEBUG_IMX53_UART
                bool "i.MX53 Debug UART"
                depends on SOC_IMX53
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX53.

        config DEBUG_IMX6Q_UART
                bool "i.MX6Q/DL Debug UART"
                depends on SOC_IMX6Q
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX6Q/DL.

        config DEBUG_IMX6SL_UART
                bool "i.MX6SL Debug UART"
                depends on SOC_IMX6SL
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX6SL.

        config DEBUG_IMX6SX_UART
                bool "i.MX6SX Debug UART"
                depends on SOC_IMX6SX
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX6SX.

        config DEBUG_IMX6UL_UART
                bool "i.MX6UL Debug UART"
                depends on SOC_IMX6UL
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX6UL.

        config DEBUG_IMX7D_UART
                bool "i.MX7D Debug UART"
                depends on SOC_IMX7D
                help
                  Say Y here if you want kernel low-level debugging support
                  on i.MX7D.

        config DEBUG_INTEGRATOR
                bool "Kernel low-level debugging messages via ARM Integrator UART"
                depends on ARCH_INTEGRATOR
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on ARM Integrator platforms.

        config DEBUG_KEYSTONE_UART0
                bool "Kernel low-level debugging on KEYSTONE2 using UART0"
                depends on ARCH_KEYSTONE
                select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART0 serial port on KEYSTONE2 devices.

        config DEBUG_KEYSTONE_UART1
                bool "Kernel low-level debugging on KEYSTONE2 using UART1"
                depends on ARCH_KEYSTONE
                select DEBUG_UART_8250
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART1 serial port on KEYSTONE2 devices.

        config DEBUG_LPC18XX_UART0
                bool "Kernel low-level debugging via LPC18xx/43xx UART0"
                depends on ARCH_LPC18XX
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on NXP LPC18xx/43xx UART0.

        config DEBUG_LPC32XX
                bool "Kernel low-level debugging messages via NXP LPC32xx UART"
                depends on ARCH_LPC32XX
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on NXP LPC32xx based platforms.

        config DEBUG_MESON_UARTAO
                bool "Kernel low-level debugging via Meson6 UARTAO"
                depends on ARCH_MESON
                help
                  Say Y here if you want kernel low-lever debugging support
                  on Amlogic Meson6 based platforms on the UARTAO.

        config DEBUG_MMP_UART2
                bool "Kernel low-level debugging message via MMP UART2"
                depends on ARCH_MMP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on MMP UART2.

        config DEBUG_MMP_UART3
                bool "Kernel low-level debugging message via MMP UART3"
                depends on ARCH_MMP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on MMP UART3.

        config DEBUG_MVEBU_UART0
                bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"
                depends on ARCH_MVEBU
                depends on ARCH_MVEBU && CPU_V7
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on MVEBU based platforms on UART0.

                  This option should be used with the old bootloaders
                  that left the internal registers mapped at
                  0xd0000000. As of today, this is the case on
                  platforms such as the Globalscale Mirabox or the
                  Plathome OpenBlocks AX3, when using the original
                  bootloader.

                  This option will not work on older Marvell platforms
                  (Kirkwood, Dove, MV78xx0, Orion5x), which should pick
                  the "new bootloader" variant.

                  If the wrong DEBUG_MVEBU_UART* option is selected,
                  when u-boot hands over to the kernel, the system
                  silently crashes, with no serial output at all.

        config DEBUG_MVEBU_UART0_ALTERNATE
                bool "Kernel low-level debugging messages via MVEBU UART0 (new bootloaders)"
                depends on ARCH_MVEBU || ARCH_DOVE || ARCH_MV78XX0 || ARCH_ORION5X
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on MVEBU based platforms on UART0. (Armada XP, Armada 3xx,
                  Kirkwood, Dove, MV78xx0, Orion5x).


                  This option should be used with the new bootloaders
                  that remap the internal registers at 0xf1000000.

                  If the wrong DEBUG_MVEBU_UART* option is selected,
                  when u-boot hands over to the kernel, the system
                  silently crashes, with no serial output at all.

        config DEBUG_MVEBU_UART1_ALTERNATE
                bool "Kernel low-level debugging messages via MVEBU UART1 (new bootloaders)"
                depends on ARCH_MVEBU
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on MVEBU based platforms on UART1. (Armada XP, Armada 3xx,
                  Kirkwood, Dove, MV78xx0, Orion5x).

                  This option should be used with the new bootloaders
                  that remap the internal registers at 0xf1000000.
                  All of the older (pre Armada XP/370) platforms also use
                  this address, regardless of the boot loader version.

                  If the wrong DEBUG_MVEBU_UART* option is selected,
                  when u-boot hands over to the kernel, the system
                  silently crashes, with no serial output at all.

        config DEBUG_MSTARV7_PMUART
                bool "Kernel low-level debugging messages via MSTARV7 PM UART"
                depends on ARCH_MSTARV7
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  for MSTAR ARMv7-based platforms on PM UART.

        config DEBUG_MT6589_UART0
                bool "Mediatek mt6589 UART0"
                depends on ARCH_MEDIATEK
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  for Mediatek mt6589 based platforms on UART0.

        config DEBUG_MT8127_UART0
                bool "Mediatek mt8127/mt6592 UART0"
                depends on ARCH_MEDIATEK
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  for Mediatek mt8127 based platforms on UART0.

        config DEBUG_MT8135_UART3
                bool "Mediatek mt8135 UART3"
                depends on ARCH_MEDIATEK
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  for Mediatek mt8135 based platforms on UART3.

        config DEBUG_NOMADIK_UART
                bool "Kernel low-level debugging messages via NOMADIK UART"
                depends on ARCH_NOMADIK
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on NOMADIK based platforms.

        config DEBUG_NSPIRE_CLASSIC_UART
                bool "Kernel low-level debugging via TI-NSPIRE 8250 UART"
                depends on ARCH_NSPIRE
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on TI-NSPIRE classic models.

        config DEBUG_NSPIRE_CX_UART
                bool "Kernel low-level debugging via TI-NSPIRE PL011 UART"
                depends on ARCH_NSPIRE
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on TI-NSPIRE CX models.

        config DEBUG_OMAP1UART1
                bool "Kernel low-level debugging via OMAP1 UART1"
                depends on ARCH_OMAP1
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on OMAP1 based platforms (except OMAP730) on the UART1.

        config DEBUG_OMAP1UART2
                bool "Kernel low-level debugging via OMAP1 UART2"
                depends on ARCH_OMAP1
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on OMAP1 based platforms (except OMAP730) on the UART2.

        config DEBUG_OMAP1UART3
                bool "Kernel low-level debugging via OMAP1 UART3"
                depends on ARCH_OMAP1
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on OMAP1 based platforms (except OMAP730) on the UART3.

        config DEBUG_OMAP2UART1
                bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250
                help
                  This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
                  omap3 torpedo and 3530 lv som.

        config DEBUG_OMAP2UART2
                bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_OMAP2UART3
                bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_OMAP3UART3
                bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250
                help
                  This covers at least cm_t3x, beagle, crane, devkit8000,
                  igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
                  and 3517evm.

        config DEBUG_OMAP4UART3
                bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_OMAP3UART4
                bool "Kernel low-level debugging messages via OMAP36XX UART4"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_OMAP4UART4
                bool "Kernel low-level debugging messages via OMAP4/5 UART4"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_TI81XXUART1
                bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_TI81XXUART2
                bool "Kernel low-level debugging messages via TI81XX UART2"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_TI81XXUART3
                bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_AM33XXUART1
                bool "Kernel low-level debugging messages via AM33XX UART1"
                depends on ARCH_OMAP2PLUS
                select DEBUG_UART_8250

        config DEBUG_ZOOM_UART
                bool "Kernel low-level debugging messages via Zoom2/3 UART"
                depends on ARCH_OMAP2PLUS
                select DEBUG_OMAP2PLUS_UART

        config DEBUG_PXA_UART1
                depends on ARCH_PXA
                bool "Use PXA UART1 for low-level debug"
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on PXA UART1.

        config DEBUG_QCOM_UARTDM
                bool "Kernel low-level debugging messages via QCOM UARTDM"
                depends on ARCH_QCOM
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the serial port on Qualcomm devices.

                  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT
                  APQ8064   0x16640000        0xf0040000
                  APQ8084   0xf995e000        0xfa75e000
                  IPQ4019   0x078af000        0xf78af000
                  MSM8X60   0x19c40000        0xf0040000
                  MSM8960   0x16440000        0xf0040000
                  MSM8974   0xf991e000        0xfa71e000

                  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
                  options based on your needs.

        config DEBUG_REALVIEW_STD_PORT
                bool "RealView Default UART"
                depends on ARCH_REALVIEW
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the serial port on RealView EB, PB11MP, PBA8
                  and PBX platforms.

        config DEBUG_REALVIEW_PB1176_PORT
                bool "RealView PB1176 UART"
                depends on MACH_REALVIEW_PB1176
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the standard serial port on the RealView
                  PB1176 platform.

        config DEBUG_RV1108_UART0
                bool "Kernel low-level debugging messages via Rockchip RV1108 UART0"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip RV1108 based platforms.

        config DEBUG_RV1108_UART1
                bool "Kernel low-level debugging messages via Rockchip RV1108 UART1"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip RV1108 based platforms.

        config DEBUG_RV1108_UART2
                bool "Kernel low-level debugging messages via Rockchip RV1108 UART2"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip RV1108 based platforms.

        config DEBUG_RK29_UART0
                bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK29_UART1
                bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK29_UART2
                bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK3X_UART0
                bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK3X_UART1
                bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK3X_UART2
                bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK3X_UART3
                bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip based platforms.

        config DEBUG_RK32_UART2
                bool "Kernel low-level debugging messages via Rockchip RK32 UART2"
                depends on ARCH_ROCKCHIP
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Rockchip RK32xx based platforms.

        config DEBUG_R7S72100_SCIF2
                bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
                depends on ARCH_R7S72100
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF2 on Renesas RZ/A1H (R7S72100).

        config DEBUG_R7S9210_SCIF2
                bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
                depends on ARCH_R7S9210
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF2 on Renesas RZ/A2M (R7S9210).

        config DEBUG_R7S9210_SCIF4
                bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
                depends on ARCH_R7S9210
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF4 on Renesas RZ/A2M (R7S9210).

        config DEBUG_RCAR_GEN1_SCIF0
                bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
                depends on ARCH_R8A7778
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF0 on Renesas R-Car M1A (R8A7778).

        config DEBUG_RCAR_GEN1_SCIF2
                bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
                depends on ARCH_R8A7779
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF2 on Renesas R-Car H1 (R8A7779).

        config DEBUG_RCAR_GEN2_SCIF0
                bool "Kernel low-level debugging messages via SCIF0 on R-Car Gen2 and RZ/G1"
                depends on ARCH_R8A7743 || ARCH_R8A7744 || ARCH_R8A7790 || \
                        ARCH_R8A7791 || ARCH_R8A7792 || ARCH_R8A7793
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF0 on Renesas RZ/G1M (R8A7743), RZ/G1N (R8A7744),
                  R-Car H2 (R8A7790), M2-W (R8A7791), V2H (R8A7792), or
                  M2-N (R8A7793).

        config DEBUG_RCAR_GEN2_SCIF1
                bool "Kernel low-level debugging messages via SCIF1 on R8A77470"
                depends on ARCH_R8A77470
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF1 on Renesas RZ/G1C (R8A77470).

        config DEBUG_RCAR_GEN2_SCIF2
                bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
                depends on ARCH_R8A7794
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF2 on Renesas R-Car E2 (R8A7794).

        config DEBUG_RCAR_GEN2_SCIF4
                bool "Kernel low-level debugging messages via SCIF4 on R8A7745"
                depends on ARCH_R8A7745
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIF4 on Renesas RZ/G1E (R8A7745).

        config DEBUG_RCAR_GEN2_SCIFA2
                bool "Kernel low-level debugging messages via SCIFA2 on R8A7742"
                depends on ARCH_R8A7742
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIFA2 on Renesas RZ/G1H (R8A7742).

        config DEBUG_RMOBILE_SCIFA0
                bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4"
                depends on ARCH_R8A73A4
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4).

        config DEBUG_RMOBILE_SCIFA1
                bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
                depends on ARCH_R8A7740
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIFA1 on Renesas R-Mobile A1 (R8A7740).

        config DEBUG_RMOBILE_SCIFA4
                bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
                depends on ARCH_SH73A0
                help
                  Say Y here if you want kernel low-level debugging support
                  via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).

        config DEBUG_S3C_UART0
                depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C64XX_UART if ARCH_S3C64XX
                select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 0 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART 0. The port must have been initialised
                  by the boot-loader before use.

        config DEBUG_S3C_UART1
                depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C64XX_UART if ARCH_S3C64XX
                select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 1 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART 1. The port must have been initialised
                  by the boot-loader before use.

        config DEBUG_S3C_UART2
                depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C64XX_UART if ARCH_S3C64XX
                select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 2 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART 2. The port must have been initialised
                  by the boot-loader before use.

        config DEBUG_S3C_UART3
                depends on ARCH_EXYNOS || ARCH_S5PV210
                select DEBUG_EXYNOS_UART if ARCH_EXYNOS
                select DEBUG_S3C64XX_UART if ARCH_S3C64XX
                select DEBUG_S5PV210_UART if ARCH_S5PV210
                bool "Use Samsung S3C UART 3 for low-level debug"
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART 3. The port must have been initialised
                  by the boot-loader before use.

        config DEBUG_SA1100
                depends on ARCH_SA1100
                bool "Use SA1100 UARTs for low-level debug"
                help
                  Say Y here if you want kernel low-level debugging support
                  on SA-11x0 UART ports. The kernel will check for the first
                  enabled UART in a sequence 3-1-2.

        config DEBUG_SD5203_UART
                bool "Hisilicon SD5203 Debug UART"
                depends on ARCH_SD5203
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on SD5203 UART.

        config DEBUG_SOCFPGA_UART0
                depends on ARCH_INTEL_SOCFPGA
                bool "Use SOCFPGA UART0 for low-level debug"
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.

        config DEBUG_SOCFPGA_ARRIA10_UART1
                depends on ARCH_INTEL_SOCFPGA
                bool "Use SOCFPGA Arria10 UART1 for low-level debug"
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on SOCFPGA(Arria 10) based platforms.

        config DEBUG_SOCFPGA_CYCLONE5_UART1
                depends on ARCH_INTEL_SOCFPGA
                bool "Use SOCFPGA Cyclone 5 UART1 for low-level debug"
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on SOCFPGA(Cyclone 5 and Arria 5) based platforms.

        config DEBUG_SUN9I_UART0
                bool "Kernel low-level debugging messages via sun9i UART0"
                depends on MACH_SUN9I
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Allwinner A80 based platforms on the UART0.

        config DEBUG_SUNXI_UART0
                bool "Kernel low-level debugging messages via sunXi UART0"
                depends on ARCH_SUNXI
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Allwinner A1X based platforms on the UART0.

        config DEBUG_SUNXI_UART1
                bool "Kernel low-level debugging messages via sunXi UART1"
                depends on ARCH_SUNXI
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Allwinner A1X based platforms on the UART1.

        config DEBUG_SUNXI_R_UART
                bool "Kernel low-level debugging messages via sunXi R_UART"
                depends on MACH_SUN6I || MACH_SUN8I
                select DEBUG_UART_8250
                help
                  Say Y here if you want kernel low-level debugging support
                  on Allwinner A31/A23 based platforms on the R_UART.

        config DEBUG_SPEAR3XX
                bool "Kernel low-level debugging messages via ST SPEAr 3xx/6xx UART"
                depends on ARCH_SPEAR3XX || ARCH_SPEAR6XX
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on ST SPEAr based platforms.

        config DEBUG_SPEAR13XX
                bool "Kernel low-level debugging messages via ST SPEAr 13xx UART"
                depends on ARCH_SPEAR13XX
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on ST SPEAr13xx based platforms.

        config DEBUG_STIH41X_ASC2
                bool "Use StiH415/416 ASC2 UART for low-level debug"
                depends on ARCH_STI
                help
                  Say Y here if you want kernel low-level debugging support
                  on STiH415/416 based platforms like b2000, which has
                  default UART wired up to ASC2.

                  If unsure, say N.

        config DEBUG_STIH41X_SBC_ASC1
                bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
                depends on ARCH_STI
                help
                  Say Y here if you want kernel low-level debugging support
                  on STiH415/416 based platforms like b2020. which has
                  default UART wired up to SBC ASC1.

                  If unsure, say N.

        config DEBUG_STIH418_SBC_ASC0
                bool "Use StiH418 SBC ASC0 UART for low-level debug"
                depends on ARCH_STI
                help
                  Say Y here if you want kernel low-level debugging support
                  on STiH418 based platforms which has default UART wired
                  up to SBC ASC0.

                  If unsure, say N.

        config STM32F4_DEBUG_UART
                bool "Use STM32F4 UART for low-level debug"
                depends on MACH_STM32F429 || MACH_STM32F469
                select DEBUG_STM32_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on STM32F4 based platforms, which default UART is wired on
                  USART1, but another UART instance can be selected by modifying
                  CONFIG_DEBUG_UART_PHYS.

                  If unsure, say N.

        config STM32F7_DEBUG_UART
                bool "Use STM32F7 UART for low-level debug"
                depends on MACH_STM32F746 || MACH_STM32F769
                select DEBUG_STM32_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on STM32F7 based platforms, which default UART is wired on
                  USART1, but another UART instance can be selected by modifying
                  CONFIG_DEBUG_UART_PHYS.

                  If unsure, say N.

        config STM32H7_DEBUG_UART
                bool "Use STM32H7 UART for low-level debug"
                depends on MACH_STM32H743
                select DEBUG_STM32_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on STM32H7 based platforms, which default UART is wired on
                  USART1, but another UART instance can be selected by modifying
                  CONFIG_DEBUG_UART_PHYS.

                  If unsure, say N.

        config STM32MP1_DEBUG_UART
                bool "Use STM32MP1 UART for low-level debug"
                depends on MACH_STM32MP157
                select DEBUG_STM32_UART
                help
                  Say Y here if you want kernel low-level debugging support on
                  STM32MP1-based platforms, where the default UART is wired to
                  UART4, but another UART instance can be selected by modifying
                  CONFIG_DEBUG_UART_PHYS and CONFIG_DEBUG_UART_VIRT.

                  If unsure, say N.

        config TEGRA_DEBUG_UART_AUTO_ODMDATA
                bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
                depends on ARCH_TEGRA
                select DEBUG_TEGRA_UART
                help
                  Automatically determines which UART to use for low-level
                  debug based on the ODMDATA value. This value is part of
                  the BCT, and is written to the boot memory device using
                  nvflash, or other flashing tool.  When bits 19:18 are 3,
                  then bits 17:15 indicate which UART to use; 0/1/2/3/4
                  are UART A/B/C/D/E.

        config TEGRA_DEBUG_UARTA
                bool "Kernel low-level debugging messages via Tegra UART A"
                depends on ARCH_TEGRA
                select DEBUG_TEGRA_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on Tegra based platforms.

        config TEGRA_DEBUG_UARTB
                bool "Kernel low-level debugging messages via Tegra UART B"
                depends on ARCH_TEGRA
                select DEBUG_TEGRA_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on Tegra based platforms.

        config TEGRA_DEBUG_UARTC
                bool "Kernel low-level debugging messages via Tegra UART C"
                depends on ARCH_TEGRA
                select DEBUG_TEGRA_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on Tegra based platforms.

        config TEGRA_DEBUG_UARTD
                bool "Kernel low-level debugging messages via Tegra UART D"
                depends on ARCH_TEGRA
                select DEBUG_TEGRA_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on Tegra based platforms.

        config TEGRA_DEBUG_UARTE
                bool "Kernel low-level debugging messages via Tegra UART E"
                depends on ARCH_TEGRA
                select DEBUG_TEGRA_UART
                help
                  Say Y here if you want kernel low-level debugging support
                  on Tegra based platforms.

        config DEBUG_UX500_UART
                depends on ARCH_U8500
                bool "Use Ux500 UART for low-level debug"
                help
                  Say Y here if you want kernel low-level debugging support
                  on Ux500 based platforms.

        config DEBUG_VERSATILE
                bool "Kernel low-level debugging messages via ARM Versatile UART"
                depends on ARCH_VERSATILE
                select DEBUG_UART_PL01X
                help
                  Say Y here if you want kernel low-level debugging support
                  on ARM Versatile platforms.

        config DEBUG_VEXPRESS_UART0_DETECT
                bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
                depends on ARCH_VEXPRESS && CPU_CP15_MMU
                help
                  This option enables a simple heuristic which tries to determine
                  the motherboard's memory map variant (original or RS1) and then
                  choose the relevant UART0 base address.

                  Note that this will only work with standard A-class core tiles,
                  and may fail with non-standard SMM or custom software models.

        config DEBUG_VEXPRESS_UART0_CA9
                bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
                depends on ARCH_VEXPRESS
                select DEBUG_UART_PL01X
                help
                  This option selects UART0 at 0x10009000. Except for custom models,
                  this applies only to the V2P-CA9 tile.

        config DEBUG_VEXPRESS_UART0_RS1
                bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
                depends on ARCH_VEXPRESS
                select DEBUG_UART_PL01X
                help
                  This option selects UART0 at 0x1c090000. This applies to most
                  of the tiles using the RS1 memory map, including all new A-class
                  core tiles, FPGA-based SMMs and software models.

        config DEBUG_VEXPRESS_UART0_CRX
                bool "Use PL011 UART0 at 0xb0090000 (Cortex-R compliant tiles)"
                depends on ARCH_VEXPRESS && !MMU
                select DEBUG_UART_PL01X
                help
                  This option selects UART0 at 0xb0090000. This is appropriate for
                  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7

        config DEBUG_VF_UART
                bool "Vybrid UART"
                depends on SOC_VF610
                help
                  Say Y here if you want kernel low-level debugging support
                  on Vybrid based platforms.

        config DEBUG_VT8500_UART0
                bool "Use UART0 on VIA/Wondermedia SoCs"
                depends on ARCH_VT8500
                help
                  This option selects UART0 on VIA/Wondermedia System-on-a-chip
                  devices, including VT8500, WM8505, WM8650 and WM8850.

        config DEBUG_ZYNQ_UART0
                bool "Kernel low-level debugging on Xilinx Zynq using UART0"
                depends on ARCH_ZYNQ
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART0 on the Zynq platform.

        config DEBUG_ZYNQ_UART1
                bool "Kernel low-level debugging on Xilinx Zynq using UART1"
                depends on ARCH_ZYNQ
                help
                  Say Y here if you want the debug print routines to direct
                  their output to UART1 on the Zynq platform.

                  If you have a ZC702 board and want early boot messages to
                  appear on the USB serial adaptor, select this option.

        config DEBUG_ICEDCC
                bool "Kernel low-level debugging via EmbeddedICE DCC channel"
                help
                  Say Y here if you want the debug print routines to direct
                  their output to the EmbeddedICE macrocell's DCC channel using
                  co-processor 14. This is known to work on the ARM9 style ICE
                  channel and on the XScale with the PEEDI.

                  Note that the system will appear to hang during boot if there
                  is nothing connected to read from the DCC.

        config DEBUG_SEMIHOSTING
                bool "Kernel low-level debug output via semihosting I/O"
                help
                  Semihosting enables code running on an ARM target to use
                  the I/O facilities on a host debugger/emulator through a
                  simple SVC call. The host debugger or emulator must have
                  semihosting enabled for the special svc call to be trapped
                  otherwise the kernel will crash.

                  This is known to work with OpenOCD, as well as
                  ARM's Fast Models, or any other controlling environment
                  that implements semihosting.

                  For more details about semihosting, please see
                  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.

        config DEBUG_LL_UART_8250
                bool "Kernel low-level debugging via 8250 UART"
                help
                  Say Y here if you wish the debug print routes to direct
                  their output to an 8250 UART.  You can use this option
                  to provide the parameters for the 8250 UART rather than
                  selecting one of the platform specific options above if
                  you know the parameters for the port.

                  This option is preferred over the platform specific
                  options; the platform specific options are deprecated
                  and will be soon removed.

        config DEBUG_LL_UART_PL01X
                bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"
                help
                  Say Y here if you wish the debug print routes to direct
                  their output to a PL01x Primecell UART.  You can use
                  this option to provide the parameters for the UART
                  rather than selecting one of the platform specific
                  options above if you know the parameters for the port.

                  This option is preferred over the platform specific
                  options; the platform specific options are deprecated
                  and will be soon removed.

endchoice

config DEBUG_AT91_UART
        bool
        depends on ARCH_AT91

config DEBUG_EXYNOS_UART
        bool

config DEBUG_S3C64XX_UART
        bool

config DEBUG_S5PV210_UART
        bool

config DEBUG_S3C_UART
        depends on DEBUG_S3C64XX_UART ||  DEBUG_S5PV210_UART || \
                   DEBUG_EXYNOS_UART
        int
        default "0" if DEBUG_S3C_UART0
        default "1" if DEBUG_S3C_UART1
        default "2" if DEBUG_S3C_UART2
        default "3" if DEBUG_S3C_UART3

config DEBUG_OMAP2PLUS_UART
        bool
        depends on ARCH_OMAP2PLUS

config DEBUG_IMX_UART_PORT
        int "i.MX Debug UART Port Selection"
        depends on DEBUG_IMX1_UART || \
                   DEBUG_IMX25_UART || \
                   DEBUG_IMX27_UART || \
                   DEBUG_IMX31_UART || \
                   DEBUG_IMX35_UART || \
                   DEBUG_IMX50_UART || \
                   DEBUG_IMX51_UART || \
                   DEBUG_IMX53_UART || \
                   DEBUG_IMX6Q_UART || \
                   DEBUG_IMX6SL_UART || \
                   DEBUG_IMX6SX_UART || \
                   DEBUG_IMX6UL_UART || \
                   DEBUG_IMX7D_UART
        default 1
        help
          Choose UART port on which kernel low-level debug messages
          should be output.

config DEBUG_VF_UART_PORT
        int "Vybrid Debug UART Port Selection" if DEBUG_VF_UART
        default 1
        range 0 3
        depends on SOC_VF610
        help
          Choose UART port on which kernel low-level debug messages
          should be output.

config DEBUG_TEGRA_UART
        bool
        depends on ARCH_TEGRA

config DEBUG_STM32_UART
        bool
        depends on ARCH_STM32

config DEBUG_UART_FLOW_CONTROL
        bool "Enable flow control (CTS) for the debug UART"
        depends on DEBUG_LL
        default y if DEBUG_FOOTBRIDGE_COM1 || DEBUG_GEMINI || ARCH_RPC
        help
          Some UART ports are connected to terminals that will use modem
          control signals to indicate whether they are ready to receive text.
          In practice this means that the terminal is asserting the special
          control signal CTS (Clear To Send). If your debug UART supports
          this and your debug terminal will require it, enable this option.

config DEBUG_LL_INCLUDE
        string
        default "debug/sa1100.S" if DEBUG_SA1100
        default "debug/palmchip.S" if DEBUG_UART_8250_PALMCHIP
        default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
        default "debug/at91.S" if DEBUG_AT91_UART
        default "debug/asm9260.S" if DEBUG_ASM9260_UART
        default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
        default "debug/dc21285.S" if DEBUG_DC21285_PORT
        default "debug/meson.S" if DEBUG_MESON_UARTAO
        default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
        default "debug/exynos.S" if DEBUG_EXYNOS_UART
        default "debug/icedcc.S" if DEBUG_ICEDCC
        default "debug/imx.S" if DEBUG_IMX1_UART || \
                                 DEBUG_IMX25_UART || \
                                 DEBUG_IMX27_UART || \
                                 DEBUG_IMX31_UART || \
                                 DEBUG_IMX35_UART || \
                                 DEBUG_IMX50_UART || \
                                 DEBUG_IMX51_UART || \
                                 DEBUG_IMX53_UART || \
                                 DEBUG_IMX6Q_UART || \
                                 DEBUG_IMX6SL_UART || \
                                 DEBUG_IMX6SX_UART || \
                                 DEBUG_IMX6UL_UART || \
                                 DEBUG_IMX7D_UART
        default "debug/msm.S" if DEBUG_QCOM_UARTDM
        default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
        default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
        default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
        default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF1
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF4
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIFA2
        default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
        default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
        default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
        default "debug/s3c24xx.S" if DEBUG_S3C64XX_UART
        default "debug/s5pv210.S" if DEBUG_S5PV210_UART
        default "debug/sti.S" if DEBUG_STIH41X_ASC2
        default "debug/sti.S" if DEBUG_STIH41X_SBC_ASC1
        default "debug/sti.S" if DEBUG_STIH418_SBC_ASC0
        default "debug/stm32.S" if DEBUG_STM32_UART
        default "debug/tegra.S" if DEBUG_TEGRA_UART
        default "debug/ux500.S" if DEBUG_UX500_UART
        default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT
        default "debug/vf.S" if DEBUG_VF_UART
        default "debug/vt8500.S" if DEBUG_VT8500_UART0
        default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
        default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
        default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
        default "debug/brcmstb.S" if DEBUG_BRCMSTB_UART
        default "mach/debug-macro.S"

# Compatibility options for PL01x
config DEBUG_UART_PL01X
        bool

# Compatibility options for 8250
config DEBUG_UART_8250
        def_bool ARCH_IXP4XX || ARCH_RPC

config DEBUG_UART_PHYS
        hex "Physical base address of debug UART"
        default 0x01c28000 if DEBUG_SUNXI_UART0
        default 0x01c28400 if DEBUG_SUNXI_UART1
        default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1
        default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2
        default 0x01f02800 if DEBUG_SUNXI_R_UART
        default 0x02530c00 if DEBUG_KEYSTONE_UART0
        default 0x02531000 if DEBUG_KEYSTONE_UART1
        default 0x03010fe0 if ARCH_RPC
        default 0x07000000 if DEBUG_SUN9I_UART0
        default 0x09530000 if DEBUG_STIH418_SBC_ASC0
        default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
                                DEBUG_VEXPRESS_UART0_CA9
        default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
        default 0x10124000 if DEBUG_RK3X_UART0
        default 0x10126000 if DEBUG_RK3X_UART1
        default 0x101f1000 if DEBUG_VERSATILE
        default 0x101fb000 if DEBUG_NOMADIK_UART
        default 0x10210000 if DEBUG_RV1108_UART2
        default 0x10220000 if DEBUG_RV1108_UART1
        default 0x10230000 if DEBUG_RV1108_UART0
        default 0x11002000 if DEBUG_MT8127_UART0
        default 0x11006000 if DEBUG_MT6589_UART0
        default 0x11009000 if DEBUG_MT8135_UART3
        default 0x16000000 if DEBUG_INTEGRATOR
        default 0x1600d000 if DEBUG_SD5203_UART
        default 0x18000300 if DEBUG_BCM_5301X
        default 0x18000400 if DEBUG_BCM_HR2
        default 0x18023000 if DEBUG_BCM_IPROC_UART3
        default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
        default 0x1f221000 if DEBUG_MSTARV7_PMUART
        default 0x20001000 if DEBUG_HIP01_UART
        default 0x20060000 if DEBUG_RK29_UART0
        default 0x20064000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
        default 0x20068000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
        default 0x20201000 if DEBUG_BCM2835
        default 0x3e000000 if DEBUG_BCM_KONA_UART
        default 0x3f201000 if DEBUG_BCM2836
        default 0x40010000 if STM32MP1_DEBUG_UART
        default 0x40011000 if STM32F4_DEBUG_UART || STM32F7_DEBUG_UART || \
                                STM32H7_DEBUG_UART
        default 0x40028000 if DEBUG_AT91_SAMV7_USART1
        default 0x40081000 if DEBUG_LPC18XX_UART0
        default 0x40090000 if DEBUG_LPC32XX
        default 0x40100000 if DEBUG_PXA_UART1
        default 0x42000000 if DEBUG_GEMINI
        default 0x44e09000 if DEBUG_AM33XXUART1
        default 0x48020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
        default 0x48022000 if DEBUG_TI81XXUART2
        default 0x48024000 if DEBUG_TI81XXUART3
        default 0x4806a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
                                DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
        default 0x4806c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
                                DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
        default 0x4806e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
        default 0x49020000 if DEBUG_OMAP3UART3
        default 0x49042000 if DEBUG_OMAP3UART4
        default 0x7c0003f8 if DEBUG_FOOTBRIDGE_COM1
        default 0x7f005000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
        default 0x7f005400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
        default 0x7f005800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
        default 0x7f005c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
        default 0x80010000 if DEBUG_ASM9260_UART
        default 0x80070000 if DEBUG_IMX23_UART
        default 0x80074000 if DEBUG_IMX28_UART
        default 0x808c0000 if DEBUG_EP93XX || ARCH_EP93XX
        default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
        default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
        default 0xc8000000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
        default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
        default 0xd0000000 if DEBUG_SPEAR3XX
        default 0xd0012000 if DEBUG_MVEBU_UART0
        default 0xc81004c0 if DEBUG_MESON_UARTAO
        default 0xd4017000 if DEBUG_MMP_UART2
        default 0xd4018000 if DEBUG_MMP_UART3
        default 0xe0000000 if DEBUG_SPEAR13XX
        default 0xe0064200 if DEBUG_AT91_LAN966_FLEXCOM
        default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
        default 0xe4007000 if DEBUG_HIP04_UART
        default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
        default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
        default 0xe6c60000 if DEBUG_RCAR_GEN2_SCIFA2
        default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
        default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
        default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
        default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
        default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
        default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
        default 0xe8009000 if DEBUG_R7S9210_SCIF4
        default 0xf0000000 if DEBUG_DIGICOLOR_UA0
        default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
        default 0xf1012100 if DEBUG_MVEBU_UART1_ALTERNATE
        default 0xf7fc9000 if DEBUG_BERLIN_UART
        default 0xf8020000 if DEBUG_AT91_SAMA5D2_UART1
        default 0xf8b00000 if DEBUG_HIX5HD2_UART
        default 0xf991e000 if DEBUG_QCOM_UARTDM
        default 0xfc00c000 if DEBUG_AT91_SAMA5D4_USART3
        default 0xfcb00000 if DEBUG_HI3620_UART
        default 0xfd883000 if DEBUG_ALPINE_UART0
        default 0xfe531000 if DEBUG_STIH41X_SBC_ASC1
        default 0xfed32000 if DEBUG_STIH41X_ASC2
        default 0xff690000 if DEBUG_RK32_UART2
        default 0xffc02000 if DEBUG_SOCFPGA_UART0
        default 0xffc02100 if DEBUG_SOCFPGA_ARRIA10_UART1
        default 0xffc03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
        default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
        default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
        default 0xfff36000 if DEBUG_HIGHBANK_UART
        default 0xfffb0000 if DEBUG_OMAP1UART1
        default 0xfffb0800 if DEBUG_OMAP1UART2
        default 0xfffb9800 if DEBUG_OMAP1UART3
        default 0xfffe8600 if DEBUG_BCM63XX_UART
        default 0xffffee00 if DEBUG_AT91_SAM9263_DBGU
        default 0xfffff200 if DEBUG_AT91_RM9200_DBGU
        depends on ARCH_EP93XX || \
                DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
                DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
                DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
                DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
                DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
                DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
                DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \
                DEBUG_RCAR_GEN2_SCIFA2 || \
                DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
                DEBUG_RMOBILE_SCIFA4 || \
                DEBUG_S3C64XX_UART || \
                DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
                DEBUG_DIGICOLOR_UA0 || \
                DEBUG_AT91_UART || DEBUG_STM32_UART || \
                DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
                DEBUG_STIH418_SBC_ASC0

config DEBUG_UART_VIRT
        hex "Virtual base address of debug UART"
        default 0xc881f000 if DEBUG_RV1108_UART2
        default 0xc8821000 if DEBUG_RV1108_UART1
        default 0xc8912000 if DEBUG_RV1108_UART0
        default 0xe0010fe0 if ARCH_RPC
        default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
        default 0xf0010000 if DEBUG_ASM9260_UART
        default 0xf0100000 if DEBUG_DIGICOLOR_UA0
        default 0xf01fb000 if DEBUG_NOMADIK_UART
        default 0xf0201000 if DEBUG_BCM2835 || DEBUG_BCM2836
        default 0xf0221000 if DEBUG_MSTARV7_PMUART
        default 0xf1000300 if DEBUG_BCM_5301X
        default 0xf1000400 if DEBUG_BCM_HR2
        default 0xf1002000 if DEBUG_MT8127_UART0
        default 0xf1006000 if DEBUG_MT6589_UART0
        default 0xf1009000 if DEBUG_MT8135_UART3
        default 0xf1023000 if DEBUG_BCM_IPROC_UART3
        default 0xf11f1000 if DEBUG_VERSATILE
        default 0xf1600000 if DEBUG_INTEGRATOR
        default 0xf1c28000 if DEBUG_SUNXI_UART0
        default 0xf1c28400 if DEBUG_SUNXI_UART1
        default 0xf1f02800 if DEBUG_SUNXI_R_UART
        default 0xf31004c0 if DEBUG_MESON_UARTAO
        default 0xf4090000 if DEBUG_LPC32XX
        default 0xf4200000 if DEBUG_GEMINI
        default 0xf6200000 if DEBUG_PXA_UART1
        default 0xf7000000 if DEBUG_SUN9I_UART0
        default 0xf7000000 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART0
        default 0xf7000400 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART1
        default 0xf7000800 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART2
        default 0xf7000c00 if DEBUG_S3C64XX_UART && DEBUG_S3C_UART3
        default 0xf7020000 if DEBUG_AT91_SAMA5D2_UART1
        default 0xf7fc9000 if DEBUG_BERLIN_UART
        default 0xf8007000 if DEBUG_HIP04_UART
        default 0xf8009000 if DEBUG_VEXPRESS_UART0_CA9
        default 0xf8090000 if DEBUG_VEXPRESS_UART0_RS1
        default 0xf8ffee00 if DEBUG_AT91_SAM9263_DBGU
        default 0xf8fff200 if DEBUG_AT91_RM9200_DBGU
        default 0xf9530000 if DEBUG_STIH418_SBC_ASC0
        default 0xf9e09000 if DEBUG_AM33XXUART1
        default 0xfa020000 if DEBUG_OMAP4UART3 || DEBUG_TI81XXUART1
        default 0xfa022000 if DEBUG_TI81XXUART2
        default 0xfa024000 if DEBUG_TI81XXUART3
        default 0xfa06a000 if DEBUG_OMAP2UART1 || DEBUG_OMAP3UART1 || \
                                DEBUG_OMAP4UART1 || DEBUG_OMAP5UART1
        default 0xfa06c000 if DEBUG_OMAP2UART2 || DEBUG_OMAP3UART2 || \
                                DEBUG_OMAP4UART2 || DEBUG_OMAP5UART2
        default 0xfa06e000 if DEBUG_OMAP2UART3 || DEBUG_OMAP4UART4
        default 0xfa71e000 if DEBUG_QCOM_UARTDM
        default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
        default 0xfb00c000 if DEBUG_AT91_SAMA5D4_USART3
        default 0xfb020000 if DEBUG_OMAP3UART3
        default 0xfb042000 if DEBUG_OMAP3UART4
        default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
        default 0xfcfe8600 if DEBUG_BCM63XX_UART
        default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
        default 0xfd064200 if DEBUG_AT91_LAN966_FLEXCOM
        default 0xfd531000 if DEBUG_STIH41X_SBC_ASC1
        default 0xfd883000 if DEBUG_ALPINE_UART0
        default 0xfdd32000 if DEBUG_STIH41X_ASC2
        default 0xfe010000 if STM32MP1_DEBUG_UART
        default 0xfe017000 if DEBUG_MMP_UART2
        default 0xfe018000 if DEBUG_MMP_UART3
        default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
        default 0xfe300000 if DEBUG_BCM_KONA_UART
        default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART
        default 0xfeb24000 if DEBUG_RK3X_UART0
        default 0xfeb26000 if DEBUG_RK3X_UART1
        default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
        default 0xfeb31000 if DEBUG_KEYSTONE_UART1
        default 0xfec02000 if DEBUG_SOCFPGA_UART0
        default 0xfec02100 if DEBUG_SOCFPGA_ARRIA10_UART1
        default 0xfec03000 if DEBUG_SOCFPGA_CYCLONE5_UART1
        default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
        default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
        default 0xfec90000 if DEBUG_RK32_UART2
        default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1
        default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 || DEBUG_SD5203_UART
        default 0xfed60000 if DEBUG_RK29_UART0
        default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2
        default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3
        default 0xfedc0000 if DEBUG_EP93XX
        default 0xfee003f8 if DEBUG_FOOTBRIDGE_COM1
        default 0xfee20000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
        default 0xfec00000 if ARCH_IXP4XX && !CPU_BIG_ENDIAN
        default 0xfec00003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
        default 0xfef36000 if DEBUG_HIGHBANK_UART
        default 0xff0b0000 if DEBUG_OMAP1UART1
        default 0xff0b0800 if DEBUG_OMAP1UART2
        default 0xff0b9800 if DEBUG_OMAP1UART3
        default 0xffd01000 if DEBUG_HIP01_UART
        default DEBUG_UART_PHYS if !MMU
        depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
                DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
                DEBUG_QCOM_UARTDM || \
                DEBUG_S3C64XX_UART || \
                DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
                DEBUG_DIGICOLOR_UA0 || \
                DEBUG_AT91_UART || DEBUG_STM32_UART || \
                DEBUG_STIH41X_ASC2 || DEBUG_STIH41X_SBC_ASC1 || \
                DEBUG_STIH418_SBC_ASC0

config DEBUG_UART_8250_SHIFT
        int "Register offset shift for the 8250 debug UART"
        depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
        default 0 if DEBUG_FOOTBRIDGE_COM1 || DEBUG_BCM_5301X || \
                DEBUG_BCM_HR2
        default 3 if DEBUG_MSTARV7_PMUART
        default 2

config DEBUG_UART_8250_WORD
        bool "Use 32-bit accesses for 8250 UART"
        depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
        depends on DEBUG_UART_8250_SHIFT >= 2
        default y if DEBUG_SOCFPGA_UART0 || DEBUG_SOCFPGA_ARRIA10_UART1 || \
                DEBUG_SOCFPGA_CYCLONE5_UART1 || DEBUG_KEYSTONE_UART0 || \
                DEBUG_KEYSTONE_UART1 || DEBUG_ALPINE_UART0 || \
                DEBUG_DAVINCI_DA8XX_UART1 || DEBUG_DAVINCI_DA8XX_UART2 || \
                DEBUG_BCM_IPROC_UART3 || DEBUG_BCM_KONA_UART || \
                DEBUG_RK32_UART2

config DEBUG_UART_8250_PALMCHIP
        bool "8250 UART is Palmchip BK-310x"
        depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
        help
          Palmchip provides a UART implementation compatible with 16550
          except for having a different register layout.  Say Y here if
          the debug UART is of this type.

config DEBUG_UNCOMPRESS
        bool "Enable decompressor debugging via DEBUG_LL output"
        depends on !ARCH_MULTIPLATFORM
        depends on !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)
        depends on DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
                     (!DEBUG_TEGRA_UART || !ZBOOT_ROM) && \
                     !DEBUG_BRCMSTB_UART && !DEBUG_SEMIHOSTING
        help
          This option influences the normal decompressor output for
          multiplatform kernels.  Normally, multiplatform kernels disable
          decompressor output because it is not possible to know where to
          send the decompressor output.

          When this option is set, the selected DEBUG_LL output method
          will be re-used for normal decompressor output on multiplatform
          kernels.
          

config UNCOMPRESS_INCLUDE
        string
        default "mach/uncompress.h" if ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100
        default "debug/uncompress.h"

config EARLY_PRINTK
        bool "Early printk"
        depends on DEBUG_LL
        help
          Say Y here if you want to have an early console using the
          kernel low-level debugging functions. Add earlyprintk to your
          kernel parameters to enable this console.

config ARM_KPROBES_TEST
        tristate "Kprobes test module"
        depends on KPROBES && MODULES
        help
          Perform tests of kprobes API and instruction set simulation.

config PID_IN_CONTEXTIDR
        bool "Write the current PID to the CONTEXTIDR register"
        depends on CPU_COPY_V6
        help
          Enabling this option causes the kernel to write the current PID to
          the PROCID field of the CONTEXTIDR register, at the expense of some
          additional instructions during context switch. Say Y here only if you
          are planning to use hardware trace tools with this kernel.

source "drivers/hwtracing/coresight/Kconfig"