1 menu "ARM architecture"
10 select SYS_CACHE_SHIFT_6
13 config POSITION_INDEPENDENT
14 bool "Generate position-independent pre-relocation code"
16 U-Boot expects to be linked to a specific hard-coded address, and to
17 be loaded to and run from that address. This option lifts that
18 restriction, thus allowing the code to be loaded to and executed
19 from almost any address. This logic relies on the relocation
20 information that is embedded into the binary to support U-Boot
21 relocating itself to the top-of-RAM later during execution.
23 config SYS_INIT_SP_BSS_OFFSET
26 U-Boot typically uses a hard-coded value for the stack pointer
27 before relocation. Define this option to instead calculate the
28 initial SP at run-time. This is useful to avoid hard-coding addresses
29 into U-Boot, so that can be loaded and executed at arbitrary
30 addresses and thus avoid using arbitrary addresses at runtime. This
31 option's value is the offset added to &_bss_start in order to
32 calculate the stack pointer. This offset should be large enough so
33 that the early malloc region, global data (gd), and early stack usage
34 do not overlap any appended DTB.
36 config LINUX_KERNEL_IMAGE_HEADER
39 Place a Linux kernel image header at the start of the U-Boot binary.
40 The format of the header is described in the Linux kernel source at
41 Documentation/arm64/booting.txt. This feature is useful since the
42 image header reports the amount of memory (BSS and similar) that
43 U-Boot needs to use, but which isn't part of the binary.
45 if LINUX_KERNEL_IMAGE_HEADER
46 config LNX_KRNL_IMG_TEXT_OFFSET_BASE
49 The value subtracted from CONFIG_SYS_TEXT_BASE to calculate the
50 TEXT_OFFSET value written in to the Linux kernel image header.
56 default y if ARM64 && !POSITION_INDEPENDENT
58 config DMA_ADDR_T_64BIT
68 # Used for compatibility with asm files copied from the kernel
69 config ARM_ASM_UNIFIED
73 # Used for compatibility with asm files copied from the kernel
77 # If set, the workarounds for these ARM errata are applied early during U-Boot
78 # startup. Note that in general these options force the workarounds to be
79 # applied; no CPU-type/version detection exists, unlike the similar options in
80 # the Linux kernel. Do not set these options unless they apply! Also note that
81 # the following can be machine specific errata. These do have ability to
82 # provide rudimentary version and machine specific checks, but expect no
84 # CONFIG_ARM_ERRATA_430973
85 # CONFIG_ARM_ERRATA_454179
86 # CONFIG_ARM_ERRATA_621766
87 # CONFIG_ARM_ERRATA_798870
88 # CONFIG_ARM_ERRATA_801819
89 config ARM_ERRATA_430973
92 config ARM_ERRATA_454179
95 config ARM_ERRATA_621766
98 config ARM_ERRATA_716044
101 config ARM_ERRATA_725233
104 config ARM_ERRATA_742230
107 config ARM_ERRATA_743622
110 config ARM_ERRATA_751472
113 config ARM_ERRATA_761320
116 config ARM_ERRATA_773022
119 config ARM_ERRATA_774769
122 config ARM_ERRATA_794072
125 config ARM_ERRATA_798870
128 config ARM_ERRATA_801819
131 config ARM_ERRATA_826974
134 config ARM_ERRATA_828024
137 config ARM_ERRATA_829520
140 config ARM_ERRATA_833069
143 config ARM_ERRATA_833471
146 config ARM_ERRATA_845369
149 config ARM_ERRATA_852421
152 config ARM_ERRATA_852423
155 config ARM_ERRATA_855873
160 select SYS_CACHE_SHIFT_5
164 select SYS_CACHE_SHIFT_5
168 select SYS_CACHE_SHIFT_5
172 select SYS_CACHE_SHIFT_5
176 select SYS_CACHE_SHIFT_5
181 select SYS_CACHE_SHIFT_5
187 select SYS_CACHE_SHIFT_6
193 select SYS_CACHE_SHIFT_5
197 select SYS_CACHE_SHIFT_5
201 select SYS_CACHE_SHIFT_5
204 default "arm720t" if CPU_ARM720T
205 default "arm920t" if CPU_ARM920T
206 default "arm926ejs" if CPU_ARM926EJS
207 default "arm946es" if CPU_ARM946ES
208 default "arm1136" if CPU_ARM1136
209 default "arm1176" if CPU_ARM1176
210 default "armv7" if CPU_V7
211 default "armv7m" if CPU_V7M
212 default "pxa" if CPU_PXA
213 default "sa1100" if CPU_SA1100
214 default "armv8" if ARM64
218 default 4 if CPU_ARM720T
219 default 4 if CPU_ARM920T
220 default 5 if CPU_ARM926EJS
221 default 5 if CPU_ARM946ES
222 default 6 if CPU_ARM1136
223 default 6 if CPU_ARM1176
227 default 4 if CPU_SA1100
230 config SYS_CACHE_SHIFT_5
233 config SYS_CACHE_SHIFT_6
236 config SYS_CACHE_SHIFT_7
239 config SYS_CACHELINE_SIZE
241 default 128 if SYS_CACHE_SHIFT_7
242 default 64 if SYS_CACHE_SHIFT_6
243 default 32 if SYS_CACHE_SHIFT_5
246 bool "Support for ARM SMC Calling Convention (SMCCC)"
247 depends on CPU_V7 || ARM64
250 Say Y here if you want to enable ARM SMC Calling Convention.
251 This should be enabled if U-Boot needs to communicate with system
252 firmware (for example, PSCI) according to SMCCC.
255 bool "support boot from semihosting"
257 In emulated environments, semihosting is a way for
258 the hosted environment to call out to the emulator to
259 retrieve files from the host machine.
261 config SYS_THUMB_BUILD
262 bool "Build U-Boot using the Thumb instruction set"
265 Use this flag to build U-Boot using the Thumb instruction set for
266 ARM architectures. Thumb instruction set provides better code
267 density. For ARM architectures that support Thumb2 this flag will
268 result in Thumb2 code generated by GCC.
270 config SPL_SYS_THUMB_BUILD
271 bool "Build SPL using the Thumb instruction set"
272 default y if SYS_THUMB_BUILD
275 Use this flag to build SPL using the Thumb instruction set for
276 ARM architectures. Thumb instruction set provides better code
277 density. For ARM architectures that support Thumb2 this flag will
278 result in Thumb2 code generated by GCC.
280 config SYS_L2CACHE_OFF
283 If SoC does not support L2CACHE or one do not want to enable
284 L2CACHE, choose this option.
286 config ENABLE_ARM_SOC_BOOT0_HOOK
287 bool "prepare BOOT0 header"
289 If the SoC's BOOT0 requires a header area filled with (magic)
290 values, then choose this option, and create a define called
291 ARM_SOC_BOOT0_HOOK which contains the required assembler
294 config ARM_CORTEX_CPU_IS_UP
298 config USE_ARCH_MEMCPY
299 bool "Use an assembly optimized implementation of memcpy"
303 Enable the generation of an optimized version of memcpy.
304 Such implementation may be faster under some conditions
305 but may increase the binary size.
307 config SPL_USE_ARCH_MEMCPY
308 bool "Use an assembly optimized implementation of memcpy for SPL"
309 default y if USE_ARCH_MEMCPY
312 Enable the generation of an optimized version of memcpy.
313 Such implementation may be faster under some conditions
314 but may increase the binary size.
316 config USE_ARCH_MEMSET
317 bool "Use an assembly optimized implementation of memset"
321 Enable the generation of an optimized version of memset.
322 Such implementation may be faster under some conditions
323 but may increase the binary size.
325 config SPL_USE_ARCH_MEMSET
326 bool "Use an assembly optimized implementation of memset for SPL"
327 default y if USE_ARCH_MEMSET
330 Enable the generation of an optimized version of memset.
331 Such implementation may be faster under some conditions
332 but may increase the binary size.
334 config ARM64_SUPPORT_AARCH32
335 bool "ARM64 system support AArch32 execution state"
336 default y if ARM64 && !TARGET_THUNDERX_88XX
338 This ARM64 system supports AArch32 execution state.
341 prompt "Target select"
346 select SPL_BOARD_INIT if SPL
348 config TARGET_EDB93XX
349 bool "Support edb93xx"
353 config TARGET_ASPENITE
354 bool "Support aspenite"
358 bool "Support gplugd"
366 Support for TI's DaVinci platform.
369 bool "Marvell Kirkwood"
371 select BOARD_EARLY_INIT_F
372 select ARCH_MISC_INIT
375 bool "Marvell MVEBU family (Armada XP/375/38x/3700/7K/8K)"
384 config TARGET_DEVKIT3250
385 bool "Support devkit3250"
389 config TARGET_WORK_92105
390 bool "Support work_92105"
399 config TARGET_APX4DEVKIT
400 bool "Support apx4devkit"
412 bool "Support m28evk"
417 config TARGET_MX23EVK
418 bool "Support mx23evk"
421 select BOARD_EARLY_INIT_F
424 config TARGET_MX28EVK
425 bool "Support mx28evk"
428 select BOARD_EARLY_INIT_F
431 config TARGET_MX23_OLINUXINO
432 bool "Support mx23_olinuxino"
435 select BOARD_EARLY_INIT_F
439 bool "Support bg0900"
444 config TARGET_SANSA_FUZE_PLUS
445 bool "Support sansa_fuze_plus"
450 config TARGET_SC_SPS_1
451 bool "Support sc_sps_1"
460 config TARGET_SPEAR300
461 bool "Support spear300"
463 select BOARD_EARLY_INIT_F
467 config TARGET_SPEAR310
468 bool "Support spear310"
470 select BOARD_EARLY_INIT_F
474 config TARGET_SPEAR320
475 bool "Support spear320"
477 select BOARD_EARLY_INIT_F
481 config TARGET_SPEAR600
482 bool "Support spear600"
484 select BOARD_EARLY_INIT_F
488 config TARGET_STV0991
489 bool "Support stv0991"
500 select BOARD_LATE_INIT
505 config TARGET_IMX31_PHYCORE
506 bool "Support imx31_phycore_eet"
508 select BOARD_EARLY_INIT_F
510 config TARGET_IMX31_PHYCORE_EET
511 bool "Support imx31_phycore_eet"
512 select BOARD_LATE_INIT
514 select BOARD_EARLY_INIT_F
516 config TARGET_MX31ADS
517 bool "Support mx31ads"
519 select BOARD_EARLY_INIT_F
521 config TARGET_MX31PDK
522 bool "Support mx31pdk"
523 select BOARD_LATE_INIT
526 select BOARD_EARLY_INIT_F
528 config TARGET_WOODBURN
529 bool "Support woodburn"
532 config TARGET_WOODBURN_SD
533 bool "Support woodburn_sd"
541 config TARGET_MX35PDK
542 bool "Support mx35pdk"
543 select BOARD_LATE_INIT
547 bool "Broadcom BCM283X family"
553 select SERIAL_SEARCH_ALL
556 config TARGET_VEXPRESS_CA15_TC2
557 bool "Support vexpress_ca15_tc2"
559 select CPU_V7_HAS_NONSEC
560 select CPU_V7_HAS_VIRT
563 config TARGET_VEXPRESS_CA5X2
564 bool "Support vexpress_ca5x2"
568 config TARGET_VEXPRESS_CA9X4
569 bool "Support vexpress_ca9x4"
573 config TARGET_BCM23550_W1D
574 bool "Support bcm23550_w1d"
579 config TARGET_BCM28155_AP
580 bool "Support bcm28155_ap"
585 config TARGET_BCMCYGNUS
586 bool "Support bcmcygnus"
594 imply BCM_SF2_ETH_GMAC
597 bool "Support bcmnsp"
601 bool "Support Broadcom Northstar2"
604 Support for Broadcom Northstar 2 SoCs. NS2 is a quad-core 64-bit
605 ARMv8 Cortex-A57 processors targeting a broad range of networking
609 bool "Samsung EXYNOS"
620 bool "Samsung S5PC1XX"
628 bool "Calxeda Highbank"
632 config ARCH_INTEGRATOR
633 bool "ARM Ltd. Integrator family"
642 select SYS_THUMB_BUILD
648 config ARCH_OMAP2PLUS
651 select SPL_BOARD_INIT if SPL
652 select SPL_STACK_R if SPL
659 Support for the Meson SoC family developed by Amlogic Inc.,
660 targeted at media players and tablet computers. We currently
661 support the S905 (GXBaby) 64-bit SoC.
664 bool "NXP i.MX8M platform"
676 select ROM_UNIFIED_SECTIONS
681 select SYS_FSL_HAS_SEC if SECURE_BOOT
682 select SYS_FSL_SEC_COMPAT_4
683 select SYS_FSL_SEC_LE
684 select BOARD_EARLY_INIT_F
685 select ARCH_MISC_INIT
690 select SYS_FSL_HAS_SEC if SECURE_BOOT
691 select SYS_FSL_SEC_COMPAT_4
692 select SYS_FSL_SEC_LE
693 select SYS_THUMB_BUILD if SPL
697 default "arch/arm/mach-omap2/u-boot-spl.lds"
703 select BOARD_EARLY_INIT_F
706 bool "QEMU Virtual Platform"
713 bool "Renesas ARM SoCs"
716 select BOARD_EARLY_INIT_F
718 imply SYS_THUMB_BUILD
720 config TARGET_S32V234EVB
721 bool "Support s32v234evb"
723 select SYS_FSL_ERRATUM_ESDHC111
725 config ARCH_SNAPDRAGON
726 bool "Qualcomm Snapdragon SoCs"
736 bool "Altera SOCFPGA family"
740 select SPL_OF_CONTROL
744 select ENABLE_ARM_SOC_BOOT0_HOOK
745 select ARCH_EARLY_INIT_R
746 select ARCH_MISC_INIT
747 select SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
748 select SYS_THUMB_BUILD
754 bool "Support sunxi (Allwinner) SoCs"
757 select CMD_MMC if MMC
758 select CMD_USB if DISTRO_DEFAULTS
764 select DM_USB if DISTRO_DEFAULTS
765 select OF_BOARD_SETUP
768 select SPL_STACK_R if SPL
769 select SPL_SYS_MALLOC_SIMPLE if SPL
771 select SPL_SYS_THUMB_BUILD if !ARM64
772 select SYS_THUMB_BUILD if !ARM64
773 select USB if DISTRO_DEFAULTS
774 select USB_STORAGE if DISTRO_DEFAULTS
775 select USB_KEYBOARD if DISTRO_DEFAULTS
776 select USE_TINY_PRINTF
779 imply OF_LIBFDT_OVERLAY
780 imply PRE_CONSOLE_BUFFER
781 imply SPL_GPIO_SUPPORT
782 imply SPL_LIBCOMMON_SUPPORT
783 imply SPL_LIBDISK_SUPPORT
784 imply SPL_LIBGENERIC_SUPPORT
785 imply SPL_MMC_SUPPORT if MMC
786 imply SPL_POWER_SUPPORT
787 imply SPL_SERIAL_SUPPORT
791 bool "Support TS4600"
797 bool "Freescale Vybrid"
799 select SYS_FSL_ERRATUM_ESDHC111
804 bool "Xilinx Zynq based platform"
805 select BOARD_LATE_INIT
809 select SPL_BOARD_INIT if SPL
810 select SPL_OF_CONTROL if SPL
818 select SPL_SEPARATE_BSS if SPL
821 select SPL_CLK if SPL
828 bool "Xilinx ZynqMP based platform"
830 select BOARD_LATE_INIT
836 select SPL_BOARD_INIT if SPL
837 select SPL_CLK if SPL
845 config TARGET_VEXPRESS64_AEMV8A
846 bool "Support vexpress_aemv8a"
850 config TARGET_VEXPRESS64_BASE_FVP
851 bool "Support Versatile Express ARMv8a FVP BASE model"
856 config TARGET_VEXPRESS64_BASE_FVP_DRAM
857 bool "Support Versatile Express ARMv8a FVP BASE model booting from DRAM"
861 This target is derived from TARGET_VEXPRESS64_BASE_FVP and over-rides
862 the default config to allow the user to load the images directly into
863 DRAM using model parameters rather than by using semi-hosting to load
864 the files from the host filesystem.
866 config TARGET_VEXPRESS64_JUNO
867 bool "Support Versatile Express Juno Development Platform"
871 config TARGET_LS2080A_EMU
872 bool "Support ls2080a_emu"
875 select ARMV8_MULTIENTRY
876 select ARCH_MISC_INIT
878 Support for Freescale LS2080A_EMU platform
879 The LS2080A Development System (EMULATOR) is a pre silicon
880 development platform that supports the QorIQ LS2080A
881 Layerscape Architecture processor.
883 config TARGET_LS2080A_SIMU
884 bool "Support ls2080a_simu"
887 select ARMV8_MULTIENTRY
888 select ARCH_MISC_INIT
890 Support for Freescale LS2080A_SIMU platform
891 The LS2080A Development System (QDS) is a pre silicon
892 development platform that supports the QorIQ LS2080A
893 Layerscape Architecture processor.
895 config TARGET_LS1088AQDS
896 bool "Support ls1088aqds"
899 select ARMV8_MULTIENTRY
900 select ARCH_MISC_INIT
901 select BOARD_LATE_INIT
904 Support for NXP LS1088AQDS platform
905 The LS1088A Development System (QDS) is a high-performance
906 development platform that supports the QorIQ LS1088A
907 Layerscape Architecture processor.
909 config TARGET_LS2080AQDS
910 bool "Support ls2080aqds"
913 select ARMV8_MULTIENTRY
914 select BOARD_LATE_INIT
916 select ARCH_MISC_INIT
920 Support for Freescale LS2080AQDS platform
921 The LS2080A Development System (QDS) is a high-performance
922 development platform that supports the QorIQ LS2080A
923 Layerscape Architecture processor.
925 config TARGET_LS2080ARDB
926 bool "Support ls2080ardb"
929 select ARMV8_MULTIENTRY
930 select BOARD_LATE_INIT
932 select ARCH_MISC_INIT
936 Support for Freescale LS2080ARDB platform.
937 The LS2080A Reference design board (RDB) is a high-performance
938 development platform that supports the QorIQ LS2080A
939 Layerscape Architecture processor.
941 config TARGET_LS2081ARDB
942 bool "Support ls2081ardb"
945 select ARMV8_MULTIENTRY
946 select BOARD_LATE_INIT
948 select ARCH_MISC_INIT
950 Support for Freescale LS2081ARDB platform.
951 The LS2081A Reference design board (RDB) is a high-performance
952 development platform that supports the QorIQ LS2081A/LS2041A
953 Layerscape Architecture processor.
956 bool "Support HiKey 96boards Consumer Edition Platform"
964 Support for HiKey 96boards platform. It features a HI6220
965 SoC, with 8xA53 CPU, mali450 gpu, and 1GB RAM.
968 bool "Support Poplar 96boards Enterprise Edition Platform"
976 Support for Poplar 96boards EE platform. It features a HI3798cv200
977 SoC, with 4xA53 CPU, 1GB RAM and the high performance Mali T720 GPU
978 making it capable of running any commercial set-top solution based on
981 config TARGET_LS1012AQDS
982 bool "Support ls1012aqds"
985 select BOARD_LATE_INIT
987 Support for Freescale LS1012AQDS platform.
988 The LS1012A Development System (QDS) is a high-performance
989 development platform that supports the QorIQ LS1012A
990 Layerscape Architecture processor.
992 config TARGET_LS1012ARDB
993 bool "Support ls1012ardb"
996 select BOARD_LATE_INIT
1000 Support for Freescale LS1012ARDB platform.
1001 The LS1012A Reference design board (RDB) is a high-performance
1002 development platform that supports the QorIQ LS1012A
1003 Layerscape Architecture processor.
1005 config TARGET_LS1012A2G5RDB
1006 bool "Support ls1012a2g5rdb"
1009 select BOARD_LATE_INIT
1012 Support for Freescale LS1012A2G5RDB platform.
1013 The LS1012A 2G5 Reference design board (RDB) is a high-performance
1014 development platform that supports the QorIQ LS1012A
1015 Layerscape Architecture processor.
1017 config TARGET_LS1012AFRDM
1018 bool "Support ls1012afrdm"
1022 Support for Freescale LS1012AFRDM platform.
1023 The LS1012A Freedom board (FRDM) is a high-performance
1024 development platform that supports the QorIQ LS1012A
1025 Layerscape Architecture processor.
1027 config TARGET_LS1088ARDB
1028 bool "Support ls1088ardb"
1031 select ARMV8_MULTIENTRY
1032 select ARCH_MISC_INIT
1033 select BOARD_LATE_INIT
1036 Support for NXP LS1088ARDB platform.
1037 The LS1088A Reference design board (RDB) is a high-performance
1038 development platform that supports the QorIQ LS1088A
1039 Layerscape Architecture processor.
1041 config TARGET_LS1021AQDS
1042 bool "Support ls1021aqds"
1043 select BOARD_LATE_INIT
1045 select CPU_V7_HAS_NONSEC
1046 select CPU_V7_HAS_VIRT
1049 select ARCH_SUPPORT_PSCI
1050 select LS1_DEEP_SLEEP
1052 select BOARD_EARLY_INIT_F
1055 config TARGET_LS1021ATWR
1056 bool "Support ls1021atwr"
1057 select BOARD_LATE_INIT
1059 select CPU_V7_HAS_NONSEC
1060 select CPU_V7_HAS_VIRT
1063 select ARCH_SUPPORT_PSCI
1064 select LS1_DEEP_SLEEP
1065 select BOARD_EARLY_INIT_F
1068 config TARGET_LS1021AIOT
1069 bool "Support ls1021aiot"
1070 select BOARD_LATE_INIT
1072 select CPU_V7_HAS_NONSEC
1073 select CPU_V7_HAS_VIRT
1076 select ARCH_SUPPORT_PSCI
1079 Support for Freescale LS1021AIOT platform.
1080 The LS1021A Freescale board (IOT) is a high-performance
1081 development platform that supports the QorIQ LS1021A
1082 Layerscape Architecture processor.
1084 config TARGET_LS1043AQDS
1085 bool "Support ls1043aqds"
1088 select ARMV8_MULTIENTRY
1089 select BOARD_LATE_INIT
1091 select BOARD_EARLY_INIT_F
1094 Support for Freescale LS1043AQDS platform.
1096 config TARGET_LS1043ARDB
1097 bool "Support ls1043ardb"
1100 select ARMV8_MULTIENTRY
1101 select BOARD_LATE_INIT
1103 select BOARD_EARLY_INIT_F
1106 Support for Freescale LS1043ARDB platform.
1108 config TARGET_LS1046AQDS
1109 bool "Support ls1046aqds"
1112 select ARMV8_MULTIENTRY
1113 select BOARD_LATE_INIT
1115 select DM_SPI_FLASH if DM_SPI
1116 select BOARD_EARLY_INIT_F
1119 Support for Freescale LS1046AQDS platform.
1120 The LS1046A Development System (QDS) is a high-performance
1121 development platform that supports the QorIQ LS1046A
1122 Layerscape Architecture processor.
1124 config TARGET_LS1046ARDB
1125 bool "Support ls1046ardb"
1128 select ARMV8_MULTIENTRY
1129 select BOARD_LATE_INIT
1131 select DM_SPI_FLASH if DM_SPI
1132 select POWER_MC34VR500
1133 select BOARD_EARLY_INIT_F
1136 Support for Freescale LS1046ARDB platform.
1137 The LS1046A Reference Design Board (RDB) is a high-performance
1138 development platform that supports the QorIQ LS1046A
1139 Layerscape Architecture processor.
1142 bool "Support h2200"
1145 config TARGET_ZIPITZ2
1146 bool "Support zipitz2"
1149 config TARGET_COLIBRI_PXA270
1150 bool "Support colibri_pxa270"
1153 config ARCH_UNIPHIER
1154 bool "Socionext UniPhier SoCs"
1155 select BOARD_LATE_INIT
1166 select SPL_BOARD_INIT if SPL
1167 select SPL_DM if SPL
1168 select SPL_LIBCOMMON_SUPPORT if SPL
1169 select SPL_LIBGENERIC_SUPPORT if SPL
1170 select SPL_OF_CONTROL if SPL
1171 select SPL_PINCTRL if SPL
1175 Support for UniPhier SoC family developed by Socionext Inc.
1176 (formerly, System LSI Business Division of Panasonic Corporation)
1179 bool "Support STM32"
1183 select SYS_THUMB_BUILD
1186 bool "Support STMicrolectronics SoCs"
1194 Support for STMicroelectronics STiH407/10 SoC family.
1195 This SoC is used on Linaro 96Board STiH410-B2260
1197 config ARCH_ROCKCHIP
1198 bool "Support Rockchip SoCs"
1202 select SPL_DM if SPL
1204 select SYS_THUMB_BUILD if !ARM64
1205 select SPL_SYS_MALLOC_SIMPLE if SPL
1212 select DM_USB if USB
1215 select ENABLE_ARM_SOC_BOOT0_HOOK
1219 imply USB_FUNCTION_FASTBOOT
1223 imply SARADC_ROCKCHIP
1225 config TARGET_THUNDERX_88XX
1226 bool "Support ThunderX 88xx"
1229 select SYS_CACHE_SHIFT_7
1233 bool "Support Aspeed SoCs"
1239 source "arch/arm/mach-aspeed/Kconfig"
1241 source "arch/arm/mach-at91/Kconfig"
1243 source "arch/arm/mach-bcm283x/Kconfig"
1245 source "arch/arm/mach-davinci/Kconfig"
1247 source "arch/arm/mach-exynos/Kconfig"
1249 source "arch/arm/mach-highbank/Kconfig"
1251 source "arch/arm/mach-integrator/Kconfig"
1253 source "arch/arm/mach-keystone/Kconfig"
1255 source "arch/arm/mach-kirkwood/Kconfig"
1257 source "arch/arm/mach-mvebu/Kconfig"
1259 source "arch/arm/cpu/armv7/ls102xa/Kconfig"
1261 source "arch/arm/mach-imx/mx2/Kconfig"
1263 source "arch/arm/mach-imx/mx5/Kconfig"
1265 source "arch/arm/mach-imx/mx6/Kconfig"
1267 source "arch/arm/mach-imx/mx7/Kconfig"
1269 source "arch/arm/mach-imx/mx7ulp/Kconfig"
1271 source "arch/arm/mach-imx/mx8m/Kconfig"
1273 source "arch/arm/mach-omap2/Kconfig"
1275 source "arch/arm/cpu/armv8/fsl-layerscape/Kconfig"
1277 source "arch/arm/mach-orion5x/Kconfig"
1279 source "arch/arm/mach-rmobile/Kconfig"
1281 source "arch/arm/mach-meson/Kconfig"
1283 source "arch/arm/mach-qemu/Kconfig"
1285 source "arch/arm/mach-rockchip/Kconfig"
1287 source "arch/arm/mach-s5pc1xx/Kconfig"
1289 source "arch/arm/mach-snapdragon/Kconfig"
1291 source "arch/arm/mach-socfpga/Kconfig"
1293 source "arch/arm/mach-sti/Kconfig"
1295 source "arch/arm/mach-stm32/Kconfig"
1297 source "arch/arm/mach-sunxi/Kconfig"
1299 source "arch/arm/mach-tegra/Kconfig"
1301 source "arch/arm/mach-uniphier/Kconfig"
1303 source "arch/arm/cpu/armv7/vf610/Kconfig"
1305 source "arch/arm/mach-zynq/Kconfig"
1307 source "arch/arm/cpu/armv7/Kconfig"
1309 source "arch/arm/cpu/armv8/zynqmp/Kconfig"
1311 source "arch/arm/cpu/armv8/Kconfig"
1313 source "arch/arm/mach-imx/Kconfig"
1315 source "board/aries/m28evk/Kconfig"
1316 source "board/bosch/shc/Kconfig"
1317 source "board/CarMediaLab/flea3/Kconfig"
1318 source "board/Marvell/aspenite/Kconfig"
1319 source "board/Marvell/gplugd/Kconfig"
1320 source "board/armadeus/apf27/Kconfig"
1321 source "board/armltd/vexpress/Kconfig"
1322 source "board/armltd/vexpress64/Kconfig"
1323 source "board/bluegiga/apx4devkit/Kconfig"
1324 source "board/broadcom/bcm23550_w1d/Kconfig"
1325 source "board/broadcom/bcm28155_ap/Kconfig"
1326 source "board/broadcom/bcmcygnus/Kconfig"
1327 source "board/broadcom/bcmnsp/Kconfig"
1328 source "board/broadcom/bcmns2/Kconfig"
1329 source "board/cavium/thunderx/Kconfig"
1330 source "board/cirrus/edb93xx/Kconfig"
1331 source "board/creative/xfi3/Kconfig"
1332 source "board/eets/pdu001/Kconfig"
1333 source "board/freescale/ls2080a/Kconfig"
1334 source "board/freescale/ls2080aqds/Kconfig"
1335 source "board/freescale/ls2080ardb/Kconfig"
1336 source "board/freescale/ls1088a/Kconfig"
1337 source "board/freescale/ls1021aqds/Kconfig"
1338 source "board/freescale/ls1043aqds/Kconfig"
1339 source "board/freescale/ls1021atwr/Kconfig"
1340 source "board/freescale/ls1021aiot/Kconfig"
1341 source "board/freescale/ls1046aqds/Kconfig"
1342 source "board/freescale/ls1043ardb/Kconfig"
1343 source "board/freescale/ls1046ardb/Kconfig"
1344 source "board/freescale/ls1012aqds/Kconfig"
1345 source "board/freescale/ls1012ardb/Kconfig"
1346 source "board/freescale/ls1012afrdm/Kconfig"
1347 source "board/freescale/mx23evk/Kconfig"
1348 source "board/freescale/mx28evk/Kconfig"
1349 source "board/freescale/mx31ads/Kconfig"
1350 source "board/freescale/mx31pdk/Kconfig"
1351 source "board/freescale/mx35pdk/Kconfig"
1352 source "board/freescale/s32v234evb/Kconfig"
1353 source "board/gdsys/a38x/Kconfig"
1354 source "board/grinn/chiliboard/Kconfig"
1355 source "board/gumstix/pepper/Kconfig"
1356 source "board/h2200/Kconfig"
1357 source "board/hisilicon/hikey/Kconfig"
1358 source "board/hisilicon/poplar/Kconfig"
1359 source "board/imx31_phycore/Kconfig"
1360 source "board/isee/igep003x/Kconfig"
1361 source "board/olimex/mx23_olinuxino/Kconfig"
1362 source "board/phytec/pcm051/Kconfig"
1363 source "board/ppcag/bg0900/Kconfig"
1364 source "board/sandisk/sansa_fuze_plus/Kconfig"
1365 source "board/schulercontrol/sc_sps_1/Kconfig"
1366 source "board/silica/pengwyn/Kconfig"
1367 source "board/spear/spear300/Kconfig"
1368 source "board/spear/spear310/Kconfig"
1369 source "board/spear/spear320/Kconfig"
1370 source "board/spear/spear600/Kconfig"
1371 source "board/spear/x600/Kconfig"
1372 source "board/st/stv0991/Kconfig"
1373 source "board/tcl/sl50/Kconfig"
1374 source "board/birdland/bav335x/Kconfig"
1375 source "board/timll/devkit3250/Kconfig"
1376 source "board/toradex/colibri_pxa270/Kconfig"
1377 source "board/technologic/ts4600/Kconfig"
1378 source "board/vscom/baltos/Kconfig"
1379 source "board/woodburn/Kconfig"
1380 source "board/work-microwave/work_92105/Kconfig"
1381 source "board/zipitz2/Kconfig"
1383 source "arch/arm/Kconfig.debug"
1388 default "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds" if TARGET_APX4DEVKIT || TARGET_BG0900 || TARGET_M28EVK || TARGET_MX23_OLINUXINO || TARGET_MX23EVK || TARGET_MX28EVK || TARGET_SANSA_FUZE_PLUS || TARGET_SC_SPS_1 || TARGET_TS4600 || TARGET_XFI3
1389 default "arch/arm/cpu/arm1136/u-boot-spl.lds" if CPU_ARM1136
1390 default "arch/arm/cpu/armv8/u-boot-spl.lds" if ARM64