5 select HAVE_DMA_API_DEBUG
9 select SYS_SUPPORTS_APM_EMULATION
10 select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
11 select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
13 select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
14 select HAVE_KRETPROBES if (HAVE_KPROBES)
15 select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
16 select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
17 select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
18 select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
19 select HAVE_GENERIC_DMA_COHERENT
20 select HAVE_KERNEL_GZIP
21 select HAVE_KERNEL_LZO
22 select HAVE_KERNEL_LZMA
24 select HAVE_PERF_EVENTS
25 select PERF_USE_VMALLOC
26 select HAVE_REGS_AND_STACK_ACCESS_API
27 select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
28 select HAVE_C_RECORDMCOUNT
29 select HAVE_GENERIC_HARDIRQS
30 select HAVE_SPARSE_IRQ
31 select GENERIC_IRQ_SHOW
33 The ARM series is a line of low-power-consumption RISC chip designs
34 licensed by ARM Ltd and targeted at embedded applications and
35 handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
36 manufactured, but legacy ARM-based PC hardware remains popular in
37 Europe. There is an ARM Linux project with a web page at
38 <http://www.arm.linux.org.uk/>.
46 config SYS_SUPPORTS_APM_EMULATION
49 config HAVE_SCHED_CLOCK
55 config ARCH_USES_GETTIMEOFFSET
59 config GENERIC_CLOCKEVENTS
62 config GENERIC_CLOCKEVENTS_BROADCAST
64 depends on GENERIC_CLOCKEVENTS
73 select GENERIC_ALLOCATOR
84 The Extended Industry Standard Architecture (EISA) bus was
85 developed as an open alternative to the IBM MicroChannel bus.
87 The EISA bus provided some of the features of the IBM MicroChannel
88 bus while maintaining backward compatibility with cards made for
89 the older ISA bus. The EISA bus saw limited use between 1988 and
90 1995 when it was made obsolete by the PCI bus.
92 Say Y here if you are building a kernel for an EISA-based machine.
102 MicroChannel Architecture is found in some IBM PS/2 machines and
103 laptops. It is a bus system similar to PCI or ISA. See
104 <file:Documentation/mca.txt> (and especially the web page given
105 there) before attempting to build an MCA bus kernel.
107 config STACKTRACE_SUPPORT
111 config HAVE_LATENCYTOP_SUPPORT
116 config LOCKDEP_SUPPORT
120 config TRACE_IRQFLAGS_SUPPORT
124 config HARDIRQS_SW_RESEND
128 config GENERIC_IRQ_PROBE
132 config GENERIC_LOCKBREAK
135 depends on SMP && PREEMPT
137 config RWSEM_GENERIC_SPINLOCK
141 config RWSEM_XCHGADD_ALGORITHM
144 config ARCH_HAS_ILOG2_U32
147 config ARCH_HAS_ILOG2_U64
150 config ARCH_HAS_CPUFREQ
153 Internal node to signify that the ARCH has CPUFREQ support
154 and that the relevant menu configurations are displayed for
157 config ARCH_HAS_CPU_IDLE_WAIT
160 config GENERIC_HWEIGHT
164 config GENERIC_CALIBRATE_DELAY
168 config ARCH_MAY_HAVE_PC_FDC
174 config NEED_DMA_MAP_STATE
177 config GENERIC_ISA_DMA
188 default 0xffff0000 if MMU || CPU_HIGH_VECTOR
189 default DRAM_BASE if REMAP_VECTORS_TO_RAM
192 The base address of exception vectors.
194 config ARM_PATCH_PHYS_VIRT
195 bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)"
196 depends on EXPERIMENTAL
197 depends on !XIP_KERNEL && MMU
198 depends on !ARCH_REALVIEW || !SPARSEMEM
200 Patch phys-to-virt translation functions at runtime according to
201 the position of the kernel in system memory.
203 This can only be used with non-XIP with MMU kernels where
204 the base of physical memory is at a 16MB boundary.
206 config ARM_PATCH_PHYS_VIRT_16BIT
208 depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
210 source "init/Kconfig"
212 source "kernel/Kconfig.freezer"
217 bool "MMU-based Paged Memory Management Support"
220 Select if you want MMU-based virtualised addressing space
221 support by paged memory management. If unsure, say 'Y'.
224 # The "ARM system type" choice list is ordered alphabetically by option
225 # text. Please add new entries in the option alphabetic order.
228 prompt "ARM system type"
229 default ARCH_VERSATILE
231 config ARCH_INTEGRATOR
232 bool "ARM Ltd. Integrator family"
234 select ARCH_HAS_CPUFREQ
237 select GENERIC_CLOCKEVENTS
238 select PLAT_VERSATILE
239 select PLAT_VERSATILE_FPGA_IRQ
241 Support for ARM's Integrator platform.
244 bool "ARM Ltd. RealView family"
248 select GENERIC_CLOCKEVENTS
249 select ARCH_WANT_OPTIONAL_GPIOLIB
250 select PLAT_VERSATILE
251 select PLAT_VERSATILE_CLCD
252 select ARM_TIMER_SP804
253 select GPIO_PL061 if GPIOLIB
255 This enables support for ARM Ltd RealView boards.
257 config ARCH_VERSATILE
258 bool "ARM Ltd. Versatile family"
263 select GENERIC_CLOCKEVENTS
264 select ARCH_WANT_OPTIONAL_GPIOLIB
265 select PLAT_VERSATILE
266 select PLAT_VERSATILE_CLCD
267 select PLAT_VERSATILE_FPGA_IRQ
268 select ARM_TIMER_SP804
270 This enables support for ARM Ltd Versatile board.
273 bool "ARM Ltd. Versatile Express family"
274 select ARCH_WANT_OPTIONAL_GPIOLIB
276 select ARM_TIMER_SP804
278 select GENERIC_CLOCKEVENTS
280 select HAVE_PATA_PLATFORM
282 select PLAT_VERSATILE
283 select PLAT_VERSATILE_CLCD
285 This enables support for the ARM Ltd Versatile Express boards.
289 select ARCH_REQUIRE_GPIOLIB
292 This enables support for systems based on the Atmel AT91RM9200,
293 AT91SAM9 and AT91CAP9 processors.
296 bool "Broadcom BCMRING"
301 select GENERIC_CLOCKEVENTS
302 select ARCH_WANT_OPTIONAL_GPIOLIB
304 Support for Broadcom's BCMRing platform.
307 bool "Cirrus Logic CLPS711x/EP721x-based"
309 select ARCH_USES_GETTIMEOFFSET
311 Support for Cirrus Logic 711x/721x based boards.
314 bool "Cavium Networks CNS3XXX family"
316 select GENERIC_CLOCKEVENTS
318 select MIGHT_HAVE_PCI
319 select PCI_DOMAINS if PCI
321 Support for Cavium Networks CNS3XXX platform.
324 bool "Cortina Systems Gemini"
326 select ARCH_REQUIRE_GPIOLIB
327 select ARCH_USES_GETTIMEOFFSET
329 Support for the Cortina Systems Gemini family SoCs
336 select ARCH_USES_GETTIMEOFFSET
338 This is an evaluation board for the StrongARM processor available
339 from Digital. It has limited hardware on-board, including an
340 Ethernet interface, two PCMCIA sockets, two serial ports and a
349 select ARCH_REQUIRE_GPIOLIB
350 select ARCH_HAS_HOLES_MEMORYMODEL
351 select ARCH_USES_GETTIMEOFFSET
353 This enables support for the Cirrus EP93xx series of CPUs.
355 config ARCH_FOOTBRIDGE
359 select GENERIC_CLOCKEVENTS
361 Support for systems based on the DC21285 companion chip
362 ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
365 bool "Freescale MXC/iMX-based"
366 select GENERIC_CLOCKEVENTS
367 select ARCH_REQUIRE_GPIOLIB
369 select HAVE_SCHED_CLOCK
371 Support for Freescale MXC/iMX-based family of processors
374 bool "Freescale MXS-based"
375 select GENERIC_CLOCKEVENTS
376 select ARCH_REQUIRE_GPIOLIB
379 Support for Freescale MXS-based family of processors
382 bool "Freescale STMP3xxx"
385 select ARCH_REQUIRE_GPIOLIB
386 select GENERIC_CLOCKEVENTS
387 select USB_ARCH_HAS_EHCI
389 Support for systems based on the Freescale 3xxx CPUs.
392 bool "Hilscher NetX based"
395 select GENERIC_CLOCKEVENTS
397 This enables support for systems based on the Hilscher NetX Soc
400 bool "Hynix HMS720x-based"
403 select ARCH_USES_GETTIMEOFFSET
405 This enables support for systems based on the Hynix HMS720x
413 select ARCH_SUPPORTS_MSI
416 Support for Intel's IOP13XX (XScale) family of processors.
424 select ARCH_REQUIRE_GPIOLIB
426 Support for Intel's 80219 and IOP32X (XScale) family of
435 select ARCH_REQUIRE_GPIOLIB
437 Support for Intel's IOP33X (XScale) family of processors.
444 select ARCH_USES_GETTIMEOFFSET
446 Support for Intel's IXP23xx (XScale) family of processors.
449 bool "IXP2400/2800-based"
453 select ARCH_USES_GETTIMEOFFSET
455 Support for Intel's IXP2400/2800 (XScale) family of processors.
462 select GENERIC_CLOCKEVENTS
463 select HAVE_SCHED_CLOCK
464 select MIGHT_HAVE_PCI
465 select DMABOUNCE if PCI
467 Support for Intel's IXP4XX (XScale) family of processors.
473 select ARCH_REQUIRE_GPIOLIB
474 select GENERIC_CLOCKEVENTS
477 Support for the Marvell Dove SoC 88AP510
480 bool "Marvell Kirkwood"
483 select ARCH_REQUIRE_GPIOLIB
484 select GENERIC_CLOCKEVENTS
487 Support for the following Marvell Kirkwood series SoCs:
488 88F6180, 88F6192 and 88F6281.
491 bool "Marvell Loki (88RC8480)"
493 select GENERIC_CLOCKEVENTS
496 Support for the Marvell Loki (88RC8480) SoC.
501 select ARCH_REQUIRE_GPIOLIB
504 select USB_ARCH_HAS_OHCI
507 select GENERIC_CLOCKEVENTS
509 Support for the NXP LPC32XX family of processors
512 bool "Marvell MV78xx0"
515 select ARCH_REQUIRE_GPIOLIB
516 select GENERIC_CLOCKEVENTS
519 Support for the following Marvell MV78xx0 series SoCs:
527 select ARCH_REQUIRE_GPIOLIB
528 select GENERIC_CLOCKEVENTS
531 Support for the following Marvell Orion 5x series SoCs:
532 Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
533 Orion-2 (5281), Orion-1-90 (6183).
536 bool "Marvell PXA168/910/MMP2"
538 select ARCH_REQUIRE_GPIOLIB
540 select GENERIC_CLOCKEVENTS
541 select HAVE_SCHED_CLOCK
546 Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
549 bool "Micrel/Kendin KS8695"
551 select ARCH_REQUIRE_GPIOLIB
552 select ARCH_USES_GETTIMEOFFSET
554 Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
555 System-on-Chip devices.
558 bool "NetSilicon NS9xxx"
561 select GENERIC_CLOCKEVENTS
564 Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
567 <http://www.digi.com/products/microprocessors/index.jsp>
570 bool "Nuvoton W90X900 CPU"
572 select ARCH_REQUIRE_GPIOLIB
574 select GENERIC_CLOCKEVENTS
576 Support for Nuvoton (Winbond logic dept.) ARM9 processor,
577 At present, the w90x900 has been renamed nuc900, regarding
578 the ARM series product line, you can login the following
579 link address to know more.
581 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
582 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
585 bool "Nuvoton NUC93X CPU"
589 Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
590 low-power and high performance MPEG-4/JPEG multimedia controller chip.
596 select GENERIC_CLOCKEVENTS
599 select HAVE_SCHED_CLOCK
600 select ARCH_HAS_BARRIERS if CACHE_L2X0
601 select ARCH_HAS_CPUFREQ
603 This enables support for NVIDIA Tegra based systems (Tegra APX,
604 Tegra 6xx and Tegra 2 series).
607 bool "Philips Nexperia PNX4008 Mobile"
610 select ARCH_USES_GETTIMEOFFSET
612 This enables support for Philips PNX4008 mobile platform.
615 bool "PXA2xx/PXA3xx-based"
618 select ARCH_HAS_CPUFREQ
620 select ARCH_REQUIRE_GPIOLIB
621 select GENERIC_CLOCKEVENTS
622 select HAVE_SCHED_CLOCK
627 Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
632 select GENERIC_CLOCKEVENTS
633 select ARCH_REQUIRE_GPIOLIB
636 Support for Qualcomm MSM/QSD based systems. This runs on the
637 apps processor of the MSM/QSD and depends on a shared memory
638 interface to the modem processor which runs the baseband
639 stack and controls some vital subsystems
640 (clock and power control, etc).
643 bool "Renesas SH-Mobile / R-Mobile"
646 select GENERIC_CLOCKEVENTS
649 select MULTI_IRQ_HANDLER
651 Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
658 select ARCH_MAY_HAVE_PC_FDC
659 select HAVE_PATA_PLATFORM
662 select ARCH_SPARSEMEM_ENABLE
663 select ARCH_USES_GETTIMEOFFSET
665 On the Acorn Risc-PC, Linux can support the internal IDE disk and
666 CD-ROM interface, serial and parallel port, and the floppy drive.
672 select ARCH_SPARSEMEM_ENABLE
674 select ARCH_HAS_CPUFREQ
676 select GENERIC_CLOCKEVENTS
678 select HAVE_SCHED_CLOCK
680 select ARCH_REQUIRE_GPIOLIB
682 Support for StrongARM 11x0 based boards.
685 bool "Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443, S3C2450"
687 select ARCH_HAS_CPUFREQ
689 select ARCH_USES_GETTIMEOFFSET
690 select HAVE_S3C2410_I2C if I2C
692 Samsung S3C2410X CPU based systems, such as the Simtec Electronics
693 BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
694 the Samsung SMDK2410 development board (and derivatives).
696 Note, the S3C2416 and the S3C2450 are so close that they even share
697 the same SoC ID code. This means that there is no seperate machine
698 directory (no arch/arm/mach-s3c2450) as the S3C2416 was first.
701 bool "Samsung S3C64XX"
707 select ARCH_USES_GETTIMEOFFSET
708 select ARCH_HAS_CPUFREQ
709 select ARCH_REQUIRE_GPIOLIB
710 select SAMSUNG_CLKSRC
711 select SAMSUNG_IRQ_VIC_TIMER
712 select SAMSUNG_IRQ_UART
713 select S3C_GPIO_TRACK
714 select S3C_GPIO_PULL_UPDOWN
715 select S3C_GPIO_CFG_S3C24XX
716 select S3C_GPIO_CFG_S3C64XX
718 select USB_ARCH_HAS_OHCI
719 select SAMSUNG_GPIOLIB_4BIT
720 select HAVE_S3C2410_I2C if I2C
721 select HAVE_S3C2410_WATCHDOG if WATCHDOG
723 Samsung S3C64XX series based systems
726 bool "Samsung S5P6440 S5P6450"
730 select HAVE_S3C2410_WATCHDOG if WATCHDOG
731 select GENERIC_CLOCKEVENTS
732 select HAVE_SCHED_CLOCK
733 select HAVE_S3C2410_I2C if I2C
734 select HAVE_S3C_RTC if RTC_CLASS
736 Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
740 bool "Samsung S5P6442"
744 select ARCH_USES_GETTIMEOFFSET
745 select HAVE_S3C2410_WATCHDOG if WATCHDOG
747 Samsung S5P6442 CPU based systems
750 bool "Samsung S5PC100"
754 select ARM_L1_CACHE_SHIFT_6
755 select ARCH_USES_GETTIMEOFFSET
756 select HAVE_S3C2410_I2C if I2C
757 select HAVE_S3C_RTC if RTC_CLASS
758 select HAVE_S3C2410_WATCHDOG if WATCHDOG
760 Samsung S5PC100 series based systems
763 bool "Samsung S5PV210/S5PC110"
765 select ARCH_SPARSEMEM_ENABLE
768 select ARM_L1_CACHE_SHIFT_6
769 select ARCH_HAS_CPUFREQ
770 select GENERIC_CLOCKEVENTS
771 select HAVE_SCHED_CLOCK
772 select HAVE_S3C2410_I2C if I2C
773 select HAVE_S3C_RTC if RTC_CLASS
774 select HAVE_S3C2410_WATCHDOG if WATCHDOG
776 Samsung S5PV210/S5PC110 series based systems
779 bool "Samsung EXYNOS4"
781 select ARCH_SPARSEMEM_ENABLE
784 select ARCH_HAS_CPUFREQ
785 select GENERIC_CLOCKEVENTS
786 select HAVE_S3C_RTC if RTC_CLASS
787 select HAVE_S3C2410_I2C if I2C
788 select HAVE_S3C2410_WATCHDOG if WATCHDOG
790 Samsung EXYNOS4 series based systems
799 select ARCH_USES_GETTIMEOFFSET
801 Support for the StrongARM based Digital DNARD machine, also known
802 as "Shark" (<http://www.shark-linux.de/shark.html>).
805 bool "Telechips TCC ARM926-based systems"
809 select GENERIC_CLOCKEVENTS
811 Support for Telechips TCC ARM926-based systems.
814 bool "ST-Ericsson U300 Series"
817 select HAVE_SCHED_CLOCK
821 select GENERIC_CLOCKEVENTS
825 Support for ST-Ericsson U300 series mobile platforms.
828 bool "ST-Ericsson U8500 Series"
831 select GENERIC_CLOCKEVENTS
833 select ARCH_REQUIRE_GPIOLIB
834 select ARCH_HAS_CPUFREQ
836 Support for ST-Ericsson's Ux500 architecture
839 bool "STMicroelectronics Nomadik"
844 select GENERIC_CLOCKEVENTS
845 select ARCH_REQUIRE_GPIOLIB
847 Support for the Nomadik platform by ST-Ericsson
851 select GENERIC_CLOCKEVENTS
852 select ARCH_REQUIRE_GPIOLIB
856 select GENERIC_ALLOCATOR
857 select ARCH_HAS_HOLES_MEMORYMODEL
859 Support for TI's DaVinci platform.
864 select ARCH_REQUIRE_GPIOLIB
865 select ARCH_HAS_CPUFREQ
866 select GENERIC_CLOCKEVENTS
867 select HAVE_SCHED_CLOCK
868 select ARCH_HAS_HOLES_MEMORYMODEL
870 Support for TI's OMAP platform (OMAP1/2/3/4).
875 select ARCH_REQUIRE_GPIOLIB
877 select GENERIC_CLOCKEVENTS
880 Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
883 bool "VIA/WonderMedia 85xx"
886 select ARCH_HAS_CPUFREQ
887 select GENERIC_CLOCKEVENTS
888 select ARCH_REQUIRE_GPIOLIB
891 Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
895 # This is sorted alphabetically by mach-* pathname. However, plat-*
896 # Kconfigs may be included either alphabetically (according to the
897 # plat- suffix) or along side the corresponding mach-* source.
899 source "arch/arm/mach-at91/Kconfig"
901 source "arch/arm/mach-bcmring/Kconfig"
903 source "arch/arm/mach-clps711x/Kconfig"
905 source "arch/arm/mach-cns3xxx/Kconfig"
907 source "arch/arm/mach-davinci/Kconfig"
909 source "arch/arm/mach-dove/Kconfig"
911 source "arch/arm/mach-ep93xx/Kconfig"
913 source "arch/arm/mach-footbridge/Kconfig"
915 source "arch/arm/mach-gemini/Kconfig"
917 source "arch/arm/mach-h720x/Kconfig"
919 source "arch/arm/mach-integrator/Kconfig"
921 source "arch/arm/mach-iop32x/Kconfig"
923 source "arch/arm/mach-iop33x/Kconfig"
925 source "arch/arm/mach-iop13xx/Kconfig"
927 source "arch/arm/mach-ixp4xx/Kconfig"
929 source "arch/arm/mach-ixp2000/Kconfig"
931 source "arch/arm/mach-ixp23xx/Kconfig"
933 source "arch/arm/mach-kirkwood/Kconfig"
935 source "arch/arm/mach-ks8695/Kconfig"
937 source "arch/arm/mach-loki/Kconfig"
939 source "arch/arm/mach-lpc32xx/Kconfig"
941 source "arch/arm/mach-msm/Kconfig"
943 source "arch/arm/mach-mv78xx0/Kconfig"
945 source "arch/arm/plat-mxc/Kconfig"
947 source "arch/arm/mach-mxs/Kconfig"
949 source "arch/arm/mach-netx/Kconfig"
951 source "arch/arm/mach-nomadik/Kconfig"
952 source "arch/arm/plat-nomadik/Kconfig"
954 source "arch/arm/mach-ns9xxx/Kconfig"
956 source "arch/arm/mach-nuc93x/Kconfig"
958 source "arch/arm/plat-omap/Kconfig"
960 source "arch/arm/mach-omap1/Kconfig"
962 source "arch/arm/mach-omap2/Kconfig"
964 source "arch/arm/mach-orion5x/Kconfig"
966 source "arch/arm/mach-pxa/Kconfig"
967 source "arch/arm/plat-pxa/Kconfig"
969 source "arch/arm/mach-mmp/Kconfig"
971 source "arch/arm/mach-realview/Kconfig"
973 source "arch/arm/mach-sa1100/Kconfig"
975 source "arch/arm/plat-samsung/Kconfig"
976 source "arch/arm/plat-s3c24xx/Kconfig"
977 source "arch/arm/plat-s5p/Kconfig"
979 source "arch/arm/plat-spear/Kconfig"
981 source "arch/arm/plat-tcc/Kconfig"
984 source "arch/arm/mach-s3c2400/Kconfig"
985 source "arch/arm/mach-s3c2410/Kconfig"
986 source "arch/arm/mach-s3c2412/Kconfig"
987 source "arch/arm/mach-s3c2416/Kconfig"
988 source "arch/arm/mach-s3c2440/Kconfig"
989 source "arch/arm/mach-s3c2443/Kconfig"
993 source "arch/arm/mach-s3c64xx/Kconfig"
996 source "arch/arm/mach-s5p64x0/Kconfig"
998 source "arch/arm/mach-s5p6442/Kconfig"
1000 source "arch/arm/mach-s5pc100/Kconfig"
1002 source "arch/arm/mach-s5pv210/Kconfig"
1004 source "arch/arm/mach-exynos4/Kconfig"
1006 source "arch/arm/mach-shmobile/Kconfig"
1008 source "arch/arm/plat-stmp3xxx/Kconfig"
1010 source "arch/arm/mach-tegra/Kconfig"
1012 source "arch/arm/mach-u300/Kconfig"
1014 source "arch/arm/mach-ux500/Kconfig"
1016 source "arch/arm/mach-versatile/Kconfig"
1018 source "arch/arm/mach-vexpress/Kconfig"
1019 source "arch/arm/plat-versatile/Kconfig"
1021 source "arch/arm/mach-vt8500/Kconfig"
1023 source "arch/arm/mach-w90x900/Kconfig"
1025 # Definitions to make life easier
1031 select GENERIC_CLOCKEVENTS
1032 select HAVE_SCHED_CLOCK
1036 select HAVE_SCHED_CLOCK
1041 config PLAT_VERSATILE
1044 config ARM_TIMER_SP804
1047 source arch/arm/mm/Kconfig
1050 bool "Enable iWMMXt support"
1051 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
1052 default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
1054 Enable support for iWMMXt context switching at run time if
1055 running on a CPU that supports it.
1057 # bool 'Use XScale PMU as timer source' CONFIG_XSCALE_PMU_TIMER
1060 depends on CPU_XSCALE && !XSCALE_PMU_TIMER
1064 depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
1065 (!ARCH_OMAP3 || OMAP3_EMU)
1069 config MULTI_IRQ_HANDLER
1072 Allow each machine to specify it's own IRQ handler at run time.
1075 source "arch/arm/Kconfig-nommu"
1078 config ARM_ERRATA_411920
1079 bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
1080 depends on CPU_V6 || CPU_V6K
1082 Invalidation of the Instruction Cache operation can
1083 fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
1084 It does not affect the MPCore. This option enables the ARM Ltd.
1085 recommended workaround.
1087 config ARM_ERRATA_430973
1088 bool "ARM errata: Stale prediction on replaced interworking branch"
1091 This option enables the workaround for the 430973 Cortex-A8
1092 (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
1093 interworking branch is replaced with another code sequence at the
1094 same virtual address, whether due to self-modifying code or virtual
1095 to physical address re-mapping, Cortex-A8 does not recover from the
1096 stale interworking branch prediction. This results in Cortex-A8
1097 executing the new code sequence in the incorrect ARM or Thumb state.
1098 The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
1099 and also flushes the branch target cache at every context switch.
1100 Note that setting specific bits in the ACTLR register may not be
1101 available in non-secure mode.
1103 config ARM_ERRATA_458693
1104 bool "ARM errata: Processor deadlock when a false hazard is created"
1107 This option enables the workaround for the 458693 Cortex-A8 (r2p0)
1108 erratum. For very specific sequences of memory operations, it is
1109 possible for a hazard condition intended for a cache line to instead
1110 be incorrectly associated with a different cache line. This false
1111 hazard might then cause a processor deadlock. The workaround enables
1112 the L1 caching of the NEON accesses and disables the PLD instruction
1113 in the ACTLR register. Note that setting specific bits in the ACTLR
1114 register may not be available in non-secure mode.
1116 config ARM_ERRATA_460075
1117 bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
1120 This option enables the workaround for the 460075 Cortex-A8 (r2p0)
1121 erratum. Any asynchronous access to the L2 cache may encounter a
1122 situation in which recent store transactions to the L2 cache are lost
1123 and overwritten with stale memory contents from external memory. The
1124 workaround disables the write-allocate mode for the L2 cache via the
1125 ACTLR register. Note that setting specific bits in the ACTLR register
1126 may not be available in non-secure mode.
1128 config ARM_ERRATA_742230
1129 bool "ARM errata: DMB operation may be faulty"
1130 depends on CPU_V7 && SMP
1132 This option enables the workaround for the 742230 Cortex-A9
1133 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
1134 between two write operations may not ensure the correct visibility
1135 ordering of the two writes. This workaround sets a specific bit in
1136 the diagnostic register of the Cortex-A9 which causes the DMB
1137 instruction to behave as a DSB, ensuring the correct behaviour of
1140 config ARM_ERRATA_742231
1141 bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1142 depends on CPU_V7 && SMP
1144 This option enables the workaround for the 742231 Cortex-A9
1145 (r2p0..r2p2) erratum. Under certain conditions, specific to the
1146 Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1147 accessing some data located in the same cache line, may get corrupted
1148 data due to bad handling of the address hazard when the line gets
1149 replaced from one of the CPUs at the same time as another CPU is
1150 accessing it. This workaround sets specific bits in the diagnostic
1151 register of the Cortex-A9 which reduces the linefill issuing
1152 capabilities of the processor.
1154 config PL310_ERRATA_588369
1155 bool "Clean & Invalidate maintenance operations do not invalidate clean lines"
1156 depends on CACHE_L2X0
1158 The PL310 L2 cache controller implements three types of Clean &
1159 Invalidate maintenance operations: by Physical Address
1160 (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
1161 They are architecturally defined to behave as the execution of a
1162 clean operation followed immediately by an invalidate operation,
1163 both performing to the same memory location. This functionality
1164 is not correctly implemented in PL310 as clean lines are not
1165 invalidated as a result of these operations.
1167 config ARM_ERRATA_720789
1168 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1169 depends on CPU_V7 && SMP
1171 This option enables the workaround for the 720789 Cortex-A9 (prior to
1172 r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1173 broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1174 As a consequence of this erratum, some TLB entries which should be
1175 invalidated are not, resulting in an incoherency in the system page
1176 tables. The workaround changes the TLB flushing routines to invalidate
1177 entries regardless of the ASID.
1179 config PL310_ERRATA_727915
1180 bool "Background Clean & Invalidate by Way operation can cause data corruption"
1181 depends on CACHE_L2X0
1183 PL310 implements the Clean & Invalidate by Way L2 cache maintenance
1184 operation (offset 0x7FC). This operation runs in background so that
1185 PL310 can handle normal accesses while it is in progress. Under very
1186 rare circumstances, due to this erratum, write data can be lost when
1187 PL310 treats a cacheable write transaction during a Clean &
1188 Invalidate by Way operation.
1190 config ARM_ERRATA_743622
1191 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1194 This option enables the workaround for the 743622 Cortex-A9
1195 (r2p0..r2p2) erratum. Under very rare conditions, a faulty
1196 optimisation in the Cortex-A9 Store Buffer may lead to data
1197 corruption. This workaround sets a specific bit in the diagnostic
1198 register of the Cortex-A9 which disables the Store Buffer
1199 optimisation, preventing the defect from occurring. This has no
1200 visible impact on the overall performance or power consumption of the
1203 config ARM_ERRATA_751472
1204 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1205 depends on CPU_V7 && SMP
1207 This option enables the workaround for the 751472 Cortex-A9 (prior
1208 to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1209 completion of a following broadcasted operation if the second
1210 operation is received by a CPU before the ICIALLUIS has completed,
1211 potentially leading to corrupted entries in the cache or TLB.
1213 config ARM_ERRATA_753970
1214 bool "ARM errata: cache sync operation may be faulty"
1215 depends on CACHE_PL310
1217 This option enables the workaround for the 753970 PL310 (r3p0) erratum.
1219 Under some condition the effect of cache sync operation on
1220 the store buffer still remains when the operation completes.
1221 This means that the store buffer is always asked to drain and
1222 this prevents it from merging any further writes. The workaround
1223 is to replace the normal offset of cache sync operation (0x730)
1224 by another offset targeting an unmapped PL310 register 0x740.
1225 This has the same effect as the cache sync operation: store buffer
1226 drain and waiting for all buffers empty.
1228 config ARM_ERRATA_754322
1229 bool "ARM errata: possible faulty MMU translations following an ASID switch"
1232 This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1233 r3p*) erratum. A speculative memory access may cause a page table walk
1234 which starts prior to an ASID switch but completes afterwards. This
1235 can populate the micro-TLB with a stale entry which may be hit with
1236 the new ASID. This workaround places two dsb instructions in the mm
1237 switching code so that no page table walks can cross the ASID switch.
1239 config ARM_ERRATA_754327
1240 bool "ARM errata: no automatic Store Buffer drain"
1241 depends on CPU_V7 && SMP
1243 This option enables the workaround for the 754327 Cortex-A9 (prior to
1244 r2p0) erratum. The Store Buffer does not have any automatic draining
1245 mechanism and therefore a livelock may occur if an external agent
1246 continuously polls a memory location waiting to observe an update.
1247 This workaround defines cpu_relax() as smp_mb(), preventing correctly
1248 written polling loops from denying visibility of updates to memory.
1252 source "arch/arm/common/Kconfig"
1262 Find out whether you have ISA slots on your motherboard. ISA is the
1263 name of a bus system, i.e. the way the CPU talks to the other stuff
1264 inside your box. Other bus systems are PCI, EISA, MicroChannel
1265 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1266 newer boards don't support it. If you have ISA, say Y, otherwise N.
1268 # Select ISA DMA controller support
1273 # Select ISA DMA interface
1278 bool "PCI support" if MIGHT_HAVE_PCI
1280 Find out whether you have a PCI motherboard. PCI is the name of a
1281 bus system, i.e. the way the CPU talks to the other stuff inside
1282 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1283 VESA. If you have PCI, say Y, otherwise N.
1289 config PCI_NANOENGINE
1290 bool "BSE nanoEngine PCI support"
1291 depends on SA1100_NANOENGINE
1293 Enable PCI on the BSE nanoEngine board.
1298 # Select the host bridge type
1299 config PCI_HOST_VIA82C505
1301 depends on PCI && ARCH_SHARK
1304 config PCI_HOST_ITE8152
1306 depends on PCI && MACH_ARMCORE
1310 source "drivers/pci/Kconfig"
1312 source "drivers/pcmcia/Kconfig"
1316 menu "Kernel Features"
1318 source "kernel/time/Kconfig"
1321 bool "Symmetric Multi-Processing (EXPERIMENTAL)"
1322 depends on EXPERIMENTAL
1323 depends on CPU_V6K || CPU_V7
1324 depends on GENERIC_CLOCKEVENTS
1325 depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
1326 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
1327 ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
1328 ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
1329 select USE_GENERIC_SMP_HELPERS
1330 select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
1332 This enables support for systems with more than one CPU. If you have
1333 a system with only one CPU, like most personal computers, say N. If
1334 you have a system with more than one CPU, say Y.
1336 If you say N here, the kernel will run on single and multiprocessor
1337 machines, but will use only one CPU of a multiprocessor machine. If
1338 you say Y here, the kernel will run on many, but not all, single
1339 processor machines. On a single processor machine, the kernel will
1340 run faster if you say N here.
1342 See also <file:Documentation/i386/IO-APIC.txt>,
1343 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1344 <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1346 If you don't know what to do here, say N.
1349 bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
1350 depends on EXPERIMENTAL
1351 depends on SMP && !XIP_KERNEL
1354 SMP kernels contain instructions which fail on non-SMP processors.
1355 Enabling this option allows the kernel to modify itself to make
1356 these instructions safe. Disabling it allows about 1K of space
1359 If you don't know what to do here, say Y.
1365 This option enables support for the ARM system coherency unit
1372 This options enables support for the ARM timer and watchdog unit
1375 prompt "Memory split"
1378 Select the desired split between kernel and user memory.
1380 If you are not absolutely sure what you are doing, leave this
1384 bool "3G/1G user/kernel split"
1386 bool "2G/2G user/kernel split"
1388 bool "1G/3G user/kernel split"
1393 default 0x40000000 if VMSPLIT_1G
1394 default 0x80000000 if VMSPLIT_2G
1398 int "Maximum number of CPUs (2-32)"
1404 bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
1405 depends on SMP && HOTPLUG && EXPERIMENTAL
1406 depends on !ARCH_MSM
1408 Say Y here to experiment with turning CPUs off and on. CPUs
1409 can be controlled through /sys/devices/system/cpu.
1412 bool "Use local timer interrupts"
1415 select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
1417 Enable support for local timers on SMP platforms, rather then the
1418 legacy IPI broadcast method. Local timers allows the system
1419 accounting to be spread across the timer interval, preventing a
1420 "thundering herd" at every timer tick.
1422 source kernel/Kconfig.preempt
1426 default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
1427 ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
1428 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
1429 default AT91_TIMER_HZ if ARCH_AT91
1430 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
1433 config THUMB2_KERNEL
1434 bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
1435 depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
1437 select ARM_ASM_UNIFIED
1439 By enabling this option, the kernel will be compiled in
1440 Thumb-2 mode. A compiler/assembler that understand the unified
1441 ARM-Thumb syntax is needed.
1445 config THUMB2_AVOID_R_ARM_THM_JUMP11
1446 bool "Work around buggy Thumb-2 short branch relocations in gas"
1447 depends on THUMB2_KERNEL && MODULES
1450 Various binutils versions can resolve Thumb-2 branches to
1451 locally-defined, preemptible global symbols as short-range "b.n"
1452 branch instructions.
1454 This is a problem, because there's no guarantee the final
1455 destination of the symbol, or any candidate locations for a
1456 trampoline, are within range of the branch. For this reason, the
1457 kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1458 relocation in modules at all, and it makes little sense to add
1461 The symptom is that the kernel fails with an "unsupported
1462 relocation" error when loading some modules.
1464 Until fixed tools are available, passing
1465 -fno-optimize-sibling-calls to gcc should prevent gcc generating
1466 code which hits this problem, at the cost of a bit of extra runtime
1467 stack usage in some cases.
1469 The problem is described in more detail at:
1470 https://bugs.launchpad.net/binutils-linaro/+bug/725126
1472 Only Thumb-2 kernels are affected.
1474 Unless you are sure your tools don't have this problem, say Y.
1476 config ARM_ASM_UNIFIED
1480 bool "Use the ARM EABI to compile the kernel"
1482 This option allows for the kernel to be compiled using the latest
1483 ARM ABI (aka EABI). This is only useful if you are using a user
1484 space environment that is also compiled with EABI.
1486 Since there are major incompatibilities between the legacy ABI and
1487 EABI, especially with regard to structure member alignment, this
1488 option also changes the kernel syscall calling convention to
1489 disambiguate both ABIs and allow for backward compatibility support
1490 (selected with CONFIG_OABI_COMPAT).
1492 To use this you need GCC version 4.0.0 or later.
1495 bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1496 depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
1499 This option preserves the old syscall interface along with the
1500 new (ARM EABI) one. It also provides a compatibility layer to
1501 intercept syscalls that have structure arguments which layout
1502 in memory differs between the legacy ABI and the new ARM EABI
1503 (only for non "thumb" binaries). This option adds a tiny
1504 overhead to all syscalls and produces a slightly larger kernel.
1505 If you know you'll be using only pure EABI user space then you
1506 can say N here. If this option is not selected and you attempt
1507 to execute a legacy ABI binary then the result will be
1508 UNPREDICTABLE (in fact it can be predicted that it won't work
1509 at all). If in doubt say Y.
1511 config ARCH_HAS_HOLES_MEMORYMODEL
1514 config ARCH_SPARSEMEM_ENABLE
1517 config ARCH_SPARSEMEM_DEFAULT
1518 def_bool ARCH_SPARSEMEM_ENABLE
1520 config ARCH_SELECT_MEMORY_MODEL
1521 def_bool ARCH_SPARSEMEM_ENABLE
1524 bool "High Memory Support (EXPERIMENTAL)"
1525 depends on MMU && EXPERIMENTAL
1527 The address space of ARM processors is only 4 Gigabytes large
1528 and it has to accommodate user address space, kernel address
1529 space as well as some memory mapped IO. That means that, if you
1530 have a large amount of physical memory and/or IO, not all of the
1531 memory can be "permanently mapped" by the kernel. The physical
1532 memory that is not permanently mapped is called "high memory".
1534 Depending on the selected kernel/user memory split, minimum
1535 vmalloc space and actual amount of RAM, you may not need this
1536 option which should result in a slightly faster kernel.
1541 bool "Allocate 2nd-level pagetables from highmem"
1543 depends on !OUTER_CACHE
1545 config HW_PERF_EVENTS
1546 bool "Enable hardware performance counter support for perf events"
1547 depends on PERF_EVENTS && CPU_HAS_PMU
1550 Enable hardware performance counter support for perf events. If
1551 disabled, perf events will use software events only.
1555 config FORCE_MAX_ZONEORDER
1556 int "Maximum zone order" if ARCH_SHMOBILE
1557 range 11 64 if ARCH_SHMOBILE
1558 default "9" if SA1111
1561 The kernel memory allocator divides physically contiguous memory
1562 blocks into "zones", where each zone is a power of two number of
1563 pages. This option selects the largest power of two that the kernel
1564 keeps in the memory allocator. If you need to allocate very large
1565 blocks of physically contiguous memory, then you may need to
1566 increase this value.
1568 This config option is actually maximum order plus one. For example,
1569 a value of 11 means that the largest free memory block is 2^10 pages.
1572 bool "Timer and CPU usage LEDs"
1573 depends on ARCH_CDB89712 || ARCH_EBSA110 || \
1574 ARCH_EBSA285 || ARCH_INTEGRATOR || \
1575 ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
1576 ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
1577 ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
1578 ARCH_AT91 || ARCH_DAVINCI || \
1579 ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
1581 If you say Y here, the LEDs on your machine will be used
1582 to provide useful information about your current system status.
1584 If you are compiling a kernel for a NetWinder or EBSA-285, you will
1585 be able to select which LEDs are active using the options below. If
1586 you are compiling a kernel for the EBSA-110 or the LART however, the
1587 red LED will simply flash regularly to indicate that the system is
1588 still functional. It is safe to say Y here if you have a CATS
1589 system, but the driver will do nothing.
1592 bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
1593 OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
1594 || MACH_OMAP_PERSEUS2
1596 depends on !GENERIC_CLOCKEVENTS
1597 default y if ARCH_EBSA110
1599 If you say Y here, one of the system LEDs (the green one on the
1600 NetWinder, the amber one on the EBSA285, or the red one on the LART)
1601 will flash regularly to indicate that the system is still
1602 operational. This is mainly useful to kernel hackers who are
1603 debugging unstable kernels.
1605 The LART uses the same LED for both Timer LED and CPU usage LED
1606 functions. You may choose to use both, but the Timer LED function
1607 will overrule the CPU usage LED.
1610 bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
1612 || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
1613 || MACH_OMAP_PERSEUS2
1616 If you say Y here, the red LED will be used to give a good real
1617 time indication of CPU usage, by lighting whenever the idle task
1618 is not currently executing.
1620 The LART uses the same LED for both Timer LED and CPU usage LED
1621 functions. You may choose to use both, but the Timer LED function
1622 will overrule the CPU usage LED.
1624 config ALIGNMENT_TRAP
1626 depends on CPU_CP15_MMU
1627 default y if !ARCH_EBSA110
1628 select HAVE_PROC_CPU if PROC_FS
1630 ARM processors cannot fetch/store information which is not
1631 naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1632 address divisible by 4. On 32-bit ARM processors, these non-aligned
1633 fetch/store instructions will be emulated in software if you say
1634 here, which has a severe performance impact. This is necessary for
1635 correct operation of some network protocols. With an IP-only
1636 configuration it is safe to say N, otherwise say Y.
1638 config UACCESS_WITH_MEMCPY
1639 bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
1640 depends on MMU && EXPERIMENTAL
1641 default y if CPU_FEROCEON
1643 Implement faster copy_to_user and clear_user methods for CPU
1644 cores where a 8-word STM instruction give significantly higher
1645 memory write throughput than a sequence of individual 32bit stores.
1647 A possible side effect is a slight increase in scheduling latency
1648 between threads sharing the same address space if they invoke
1649 such copy operations with large buffers.
1651 However, if the CPU data cache is using a write-allocate mode,
1652 this option is unlikely to provide any performance gain.
1656 prompt "Enable seccomp to safely compute untrusted bytecode"
1658 This kernel feature is useful for number crunching applications
1659 that may need to compute untrusted bytecode during their
1660 execution. By using pipes or other transports made available to
1661 the process as file descriptors supporting the read/write
1662 syscalls, it's possible to isolate those applications in
1663 their own address space using seccomp. Once seccomp is
1664 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1665 and the task is only allowed to execute a few safe syscalls
1666 defined by each seccomp mode.
1668 config CC_STACKPROTECTOR
1669 bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
1670 depends on EXPERIMENTAL
1672 This option turns on the -fstack-protector GCC feature. This
1673 feature puts, at the beginning of functions, a canary value on
1674 the stack just before the return address, and validates
1675 the value just before actually returning. Stack based buffer
1676 overflows (that need to overwrite this return address) now also
1677 overwrite the canary, which gets detected and the attack is then
1678 neutralized via a kernel panic.
1679 This feature requires gcc version 4.2 or above.
1681 config DEPRECATED_PARAM_STRUCT
1682 bool "Provide old way to pass kernel parameters"
1684 This was deprecated in 2001 and announced to live on for 5 years.
1685 Some old boot loaders still use this way.
1691 # Compressed boot loader in ROM. Yes, we really want to ask about
1692 # TEXT and BSS so we preserve their values in the config files.
1693 config ZBOOT_ROM_TEXT
1694 hex "Compressed ROM boot loader base address"
1697 The physical address at which the ROM-able zImage is to be
1698 placed in the target. Platforms which normally make use of
1699 ROM-able zImage formats normally set this to a suitable
1700 value in their defconfig file.
1702 If ZBOOT_ROM is not enabled, this has no effect.
1704 config ZBOOT_ROM_BSS
1705 hex "Compressed ROM boot loader BSS address"
1708 The base address of an area of read/write memory in the target
1709 for the ROM-able zImage which must be available while the
1710 decompressor is running. It must be large enough to hold the
1711 entire decompressed kernel plus an additional 128 KiB.
1712 Platforms which normally make use of ROM-able zImage formats
1713 normally set this to a suitable value in their defconfig file.
1715 If ZBOOT_ROM is not enabled, this has no effect.
1718 bool "Compressed boot loader in ROM/flash"
1719 depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1721 Say Y here if you intend to execute your compressed kernel image
1722 (zImage) directly from ROM or flash. If unsure, say N.
1724 config ZBOOT_ROM_MMCIF
1725 bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
1726 depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
1728 Say Y here to include experimental MMCIF loading code in the
1729 ROM-able zImage. With this enabled it is possible to write the
1730 the ROM-able zImage kernel image to an MMC card and boot the
1731 kernel straight from the reset vector. At reset the processor
1732 Mask ROM will load the first part of the the ROM-able zImage
1733 which in turn loads the rest the kernel image to RAM using the
1734 MMCIF hardware block.
1737 string "Default kernel command string"
1740 On some architectures (EBSA110 and CATS), there is currently no way
1741 for the boot loader to pass arguments to the kernel. For these
1742 architectures, you should supply some command-line options at build
1743 time by entering them here. As a minimum, you should specify the
1744 memory size and the root device (e.g., mem=64M root=/dev/nfs).
1746 config CMDLINE_FORCE
1747 bool "Always use the default kernel command string"
1748 depends on CMDLINE != ""
1750 Always use the default kernel command string, even if the boot
1751 loader passes other arguments to the kernel.
1752 This is useful if you cannot or don't want to change the
1753 command-line options your boot loader passes to the kernel.
1758 bool "Kernel Execute-In-Place from ROM"
1759 depends on !ZBOOT_ROM
1761 Execute-In-Place allows the kernel to run from non-volatile storage
1762 directly addressable by the CPU, such as NOR flash. This saves RAM
1763 space since the text section of the kernel is not loaded from flash
1764 to RAM. Read-write sections, such as the data section and stack,
1765 are still copied to RAM. The XIP kernel is not compressed since
1766 it has to run directly from flash, so it will take more space to
1767 store it. The flash address used to link the kernel object files,
1768 and for storing it, is configuration dependent. Therefore, if you
1769 say Y here, you must know the proper physical address where to
1770 store the kernel image depending on your own flash memory usage.
1772 Also note that the make target becomes "make xipImage" rather than
1773 "make zImage" or "make Image". The final kernel binary to put in
1774 ROM memory will be arch/arm/boot/xipImage.
1778 config XIP_PHYS_ADDR
1779 hex "XIP Kernel Physical Location"
1780 depends on XIP_KERNEL
1781 default "0x00080000"
1783 This is the physical address in your flash memory the kernel will
1784 be linked for and stored to. This address is dependent on your
1788 bool "Kexec system call (EXPERIMENTAL)"
1789 depends on EXPERIMENTAL
1791 kexec is a system call that implements the ability to shutdown your
1792 current kernel, and to start another kernel. It is like a reboot
1793 but it is independent of the system firmware. And like a reboot
1794 you can start any kernel with it, not just Linux.
1796 It is an ongoing process to be certain the hardware in a machine
1797 is properly shutdown, so do not be surprised if this code does not
1798 initially work for you. It may help to enable device hotplugging
1802 bool "Export atags in procfs"
1806 Should the atags used to boot the kernel be exported in an "atags"
1807 file in procfs. Useful with kexec.
1810 bool "Build kdump crash kernel (EXPERIMENTAL)"
1811 depends on EXPERIMENTAL
1813 Generate crash dump after being started by kexec. This should
1814 be normally only set in special crash dump kernels which are
1815 loaded in the main kernel with kexec-tools into a specially
1816 reserved region and then later executed after a crash by
1817 kdump/kexec. The crash dump kernel must be compiled to a
1818 memory address not used by the main kernel
1820 For more details see Documentation/kdump/kdump.txt
1822 config AUTO_ZRELADDR
1823 bool "Auto calculation of the decompressed kernel image address"
1824 depends on !ZBOOT_ROM && !ARCH_U300
1826 ZRELADDR is the physical address where the decompressed kernel
1827 image will be placed. If AUTO_ZRELADDR is selected, the address
1828 will be determined at run-time by masking the current IP with
1829 0xf8000000. This assumes the zImage being placed in the first 128MB
1830 from start of memory.
1834 menu "CPU Power Management"
1838 source "drivers/cpufreq/Kconfig"
1841 tristate "CPUfreq driver for i.MX CPUs"
1842 depends on ARCH_MXC && CPU_FREQ
1844 This enables the CPUfreq driver for i.MX CPUs.
1846 config CPU_FREQ_SA1100
1849 config CPU_FREQ_SA1110
1852 config CPU_FREQ_INTEGRATOR
1853 tristate "CPUfreq driver for ARM Integrator CPUs"
1854 depends on ARCH_INTEGRATOR && CPU_FREQ
1857 This enables the CPUfreq driver for ARM Integrator CPUs.
1859 For details, take a look at <file:Documentation/cpu-freq>.
1865 depends on CPU_FREQ && ARCH_PXA && PXA25x
1867 select CPU_FREQ_DEFAULT_GOV_USERSPACE
1869 config CPU_FREQ_S3C64XX
1870 bool "CPUfreq support for Samsung S3C64XX CPUs"
1871 depends on CPU_FREQ && CPU_S3C6410
1876 Internal configuration node for common cpufreq on Samsung SoC
1878 config CPU_FREQ_S3C24XX
1879 bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
1880 depends on ARCH_S3C2410 && CPU_FREQ && EXPERIMENTAL
1883 This enables the CPUfreq driver for the Samsung S3C24XX family
1886 For details, take a look at <file:Documentation/cpu-freq>.
1890 config CPU_FREQ_S3C24XX_PLL
1891 bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
1892 depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
1894 Compile in support for changing the PLL frequency from the
1895 S3C24XX series CPUfreq driver. The PLL takes time to settle
1896 after a frequency change, so by default it is not enabled.
1898 This also means that the PLL tables for the selected CPU(s) will
1899 be built which may increase the size of the kernel image.
1901 config CPU_FREQ_S3C24XX_DEBUG
1902 bool "Debug CPUfreq Samsung driver core"
1903 depends on CPU_FREQ_S3C24XX
1905 Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
1907 config CPU_FREQ_S3C24XX_IODEBUG
1908 bool "Debug CPUfreq Samsung driver IO timing"
1909 depends on CPU_FREQ_S3C24XX
1911 Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
1913 config CPU_FREQ_S3C24XX_DEBUGFS
1914 bool "Export debugfs for CPUFreq"
1915 depends on CPU_FREQ_S3C24XX && DEBUG_FS
1917 Export status information via debugfs.
1921 source "drivers/cpuidle/Kconfig"
1925 menu "Floating point emulation"
1927 comment "At least one emulation must be selected"
1930 bool "NWFPE math emulation"
1931 depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
1933 Say Y to include the NWFPE floating point emulator in the kernel.
1934 This is necessary to run most binaries. Linux does not currently
1935 support floating point hardware so you need to say Y here even if
1936 your machine has an FPA or floating point co-processor podule.
1938 You may say N here if you are going to load the Acorn FPEmulator
1939 early in the bootup.
1942 bool "Support extended precision"
1943 depends on FPE_NWFPE
1945 Say Y to include 80-bit support in the kernel floating-point
1946 emulator. Otherwise, only 32 and 64-bit support is compiled in.
1947 Note that gcc does not generate 80-bit operations by default,
1948 so in most cases this option only enlarges the size of the
1949 floating point emulator without any good reason.
1951 You almost surely want to say N here.
1954 bool "FastFPE math emulation (EXPERIMENTAL)"
1955 depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
1957 Say Y here to include the FAST floating point emulator in the kernel.
1958 This is an experimental much faster emulator which now also has full
1959 precision for the mantissa. It does not support any exceptions.
1960 It is very simple, and approximately 3-6 times faster than NWFPE.
1962 It should be sufficient for most programs. It may be not suitable
1963 for scientific calculations, but you have to check this for yourself.
1964 If you do not feel you need a faster FP emulation you should better
1968 bool "VFP-format floating point maths"
1969 depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
1971 Say Y to include VFP support code in the kernel. This is needed
1972 if your hardware includes a VFP unit.
1974 Please see <file:Documentation/arm/VFP/release-notes.txt> for
1975 release notes and additional status information.
1977 Say N if your target does not have VFP hardware.
1985 bool "Advanced SIMD (NEON) Extension support"
1986 depends on VFPv3 && CPU_V7
1988 Say Y to include support code for NEON, the ARMv7 Advanced SIMD
1993 menu "Userspace binary formats"
1995 source "fs/Kconfig.binfmt"
1998 tristate "RISC OS personality"
2001 Say Y here to include the kernel code necessary if you want to run
2002 Acorn RISC OS/Arthur binaries under Linux. This code is still very
2003 experimental; if this sounds frightening, say N and sleep in peace.
2004 You can also say M here to compile this support as a module (which
2005 will be called arthur).
2009 menu "Power management options"
2011 source "kernel/power/Kconfig"
2013 config ARCH_SUSPEND_POSSIBLE
2014 depends on !ARCH_S5P64X0 && !ARCH_S5P6442
2015 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
2016 CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
2021 source "net/Kconfig"
2023 source "drivers/Kconfig"
2027 source "arch/arm/Kconfig.debug"
2029 source "security/Kconfig"
2031 source "crypto/Kconfig"
2033 source "lib/Kconfig"