[sdk/doc/content.git] / api-reference / native / framework_pkg.dox

# Doxyfile 1.7.4\r
\r
# This file describes the settings to be used by the documentation system\r
# doxygen (www.doxygen.org) for a project.\r
#\r
# All text after a hash (#) is considered a comment and will be ignored.\r
# The format is:\r
#       TAG = value [value, ...]\r
# For lists items can also be appended using:\r
#       TAG += value [value, ...]\r
# Values that contain spaces should be placed between quotes (" ").\r
\r
#---------------------------------------------------------------------------\r
# Project related configuration options\r
#---------------------------------------------------------------------------\r
\r
# This tag specifies the encoding used for all characters in the config file\r
# that follow. The default is UTF-8 which is also the encoding used for all\r
# text before the first occurrence of this tag. Doxygen uses libiconv (or the\r
# iconv built into libc) for the transcoding. See\r
# http://www.gnu.org/software/libiconv for the list of possible encodings.\r
\r
DOXYFILE_ENCODING      = UTF-8\r
\r
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded\r
# by quotes) that should identify the project.\r
\r
PROJECT_NAME           = \r
\r
# The PROJECT_NUMBER tag can be used to enter a project or revision number.\r
# This could be handy for archiving the generated documentation or\r
# if some version control system is used.\r
\r
PROJECT_NUMBER         =\r
\r
# Using the PROJECT_BRIEF tag one can provide an optional one line description\r
# for a project that appears at the top of each page and should give viewer\r
# a quick idea about the purpose of the project. Keep the description short.\r
\r
PROJECT_BRIEF          =\r
\r
# With the PROJECT_LOGO tag one can specify an logo or icon that is\r
# included in the documentation. The maximum height of the logo should not\r
# exceed 55 pixels and the maximum width should not exceed 200 pixels.\r
# Doxygen will copy the logo to the output directory.\r
\r
PROJECT_LOGO           =\r
\r
# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)\r
# base path where the generated documentation will be put.\r
# If a relative path is entered, it will be relative to the location\r
# where doxygen was started. If left blank the current directory will be used.\r
\r
OUTPUT_DIRECTORY       = \r
\r
# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create\r
# 4096 sub-directories (in 2 levels) under the output directory of each output\r
# format and will distribute the generated files over these directories.\r
# Enabling this option can be useful when feeding doxygen a huge amount of\r
# source files, where putting all generated files in the same directory would\r
# otherwise cause performance problems for the file system.\r
\r
CREATE_SUBDIRS         = NO\r
\r
# The OUTPUT_LANGUAGE tag is used to specify the language in which all\r
# documentation generated by doxygen is written. Doxygen will use this\r
# information to generate all constant output in the proper language.\r
# The default language is English, other supported languages are:\r
# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,\r
# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,\r
# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English\r
# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,\r
# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,\r
# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.\r
\r
OUTPUT_LANGUAGE        = English\r
\r
# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will\r
# include brief member descriptions after the members that are listed in\r
# the file and class documentation (similar to JavaDoc).\r
# Set to NO to disable this.\r
\r
BRIEF_MEMBER_DESC      = YES\r
\r
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend\r
# the brief description of a member or function before the detailed description.\r
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the\r
# brief descriptions will be completely suppressed.\r
\r
REPEAT_BRIEF           = NO\r
\r
# This tag implements a quasi-intelligent brief description abbreviator\r
# that is used to form the text in various listings. Each string\r
# in this list, if found as the leading text of the brief description, will be\r
# stripped from the text and the result after processing the whole list, is\r
# used as the annotated text. Otherwise, the brief description is used as-is.\r
# If left blank, the following values are used ("$name" is automatically\r
# replaced with the name of the entity): "The $name class" "The $name widget"\r
# "The $name file" "is" "provides" "specifies" "contains"\r
# "represents" "a" "an" "the"\r
\r
ABBREVIATE_BRIEF       =\r
\r
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then\r
# Doxygen will generate a detailed section even if there is only a brief\r
# description.\r
\r
ALWAYS_DETAILED_SEC    = YES\r
\r
# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all\r
# inherited members of a class in the documentation of that class as if those\r
# members were ordinary class members. Constructors, destructors and assignment\r
# operators of the base classes will not be shown.\r
\r
INLINE_INHERITED_MEMB  = NO\r
\r
# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full\r
# path before files name in the file list and in the header files. If set\r
# to NO the shortest path that makes the file name unique will be used.\r
\r
FULL_PATH_NAMES        = NO\r
\r
# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag\r
# can be used to strip a user-defined part of the path. Stripping is\r
# only done if one of the specified strings matches the left-hand part of\r
# the path. The tag can be used to show relative paths in the file list.\r
# If left blank the directory from which doxygen is run is used as the\r
# path to strip.\r
\r
STRIP_FROM_PATH        =\r
\r
# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of\r
# the path mentioned in the documentation of a class, which tells\r
# the reader which header file to include in order to use a class.\r
# If left blank only the name of the header file containing the class\r
# definition is used. Otherwise one should specify the include paths that\r
# are normally passed to the compiler using the -I flag.\r
\r
STRIP_FROM_INC_PATH    =\r
\r
# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter\r
# (but less readable) file names. This can be useful if your file system\r
# doesn't support long names like on DOS, Mac, or CD-ROM.\r
\r
SHORT_NAMES            = NO\r
\r
# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen\r
# will interpret the first line (until the first dot) of a JavaDoc-style\r
# comment as the brief description. If set to NO, the JavaDoc\r
# comments will behave just like regular Qt-style comments\r
# (thus requiring an explicit @brief command for a brief description.)\r
\r
JAVADOC_AUTOBRIEF      = NO\r
\r
# If the QT_AUTOBRIEF tag is set to YES then Doxygen will\r
# interpret the first line (until the first dot) of a Qt-style\r
# comment as the brief description. If set to NO, the comments\r
# will behave just like regular Qt-style comments (thus requiring\r
# an explicit \brief command for a brief description.)\r
\r
QT_AUTOBRIEF           = NO\r
\r
# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen\r
# treat a multi-line C++ special comment block (i.e. a block of //! or ///\r
# comments) as a brief description. This used to be the default behaviour.\r
# The new default is to treat a multi-line C++ comment block as a detailed\r
# description. Set this tag to YES if you prefer the old behaviour instead.\r
\r
MULTILINE_CPP_IS_BRIEF = NO\r
\r
# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented\r
# member inherits the documentation from any documented member that it\r
# re-implements.\r
\r
INHERIT_DOCS           = NO\r
\r
# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce\r
# a new page for each member. If set to NO, the documentation of a member will\r
# be part of the file/class/namespace that contains it.\r
\r
SEPARATE_MEMBER_PAGES  = NO\r
\r
# The TAB_SIZE tag can be used to set the number of spaces in a tab.\r
# Doxygen uses this value to replace tabs by spaces in code fragments.\r
\r
TAB_SIZE               = 4\r
\r
# This tag can be used to specify a number of aliases that acts\r
# as commands in the documentation. An alias has the form "name=value".\r
# For example adding "sideeffect=\par Side Effects:\n" will allow you to\r
# put the command \sideeffect (or @sideeffect) in the documentation, which\r
# will result in a user-defined paragraph with heading "Side Effects:".\r
# You can put \n's in the value part of an alias to insert newlines.\r
\r
ALIASES                = "prototype = @b Warning: This is a prototype" \\r
                         "privlevel = @xrefitem privlevel \"Privilege level\" \"Privilege Level\"" \\r
                         "privilege = @xrefitem privilege \"Privilege\" \"Privilege\"" \\r
                         "compatibility = @xrefitem compatibility \"Compatibility\" \"Compatibility \"" \\r
                         "feature = @xrefitem feature \"Required feature\" \"Required Feature \""       \\r
                         "final=\par Final:\n @xmlonly <pcheck-final>final</pcheck-final> @endxmlonly "\r
\r
\r
# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C\r
# sources only. Doxygen will then generate output that is more tailored for C.\r
# For instance, some of the names that are used will be different. The list\r
# of all members will be omitted, etc.\r
\r
OPTIMIZE_OUTPUT_FOR_C  = NO\r
\r
# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java\r
# sources only. Doxygen will then generate output that is more tailored for\r
# Java. For instance, namespaces will be presented as packages, qualified\r
# scopes will look different, etc.\r
\r
OPTIMIZE_OUTPUT_JAVA   = NO\r
\r
# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran\r
# sources only. Doxygen will then generate output that is more tailored for\r
# Fortran.\r
\r
OPTIMIZE_FOR_FORTRAN   = NO\r
\r
# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL\r
# sources. Doxygen will then generate output that is tailored for\r
# VHDL.\r
\r
OPTIMIZE_OUTPUT_VHDL   = NO\r
\r
# Doxygen selects the parser to use depending on the extension of the files it\r
# parses. With this tag you can assign which parser to use for a given extension.\r
# Doxygen has a built-in mapping, but you can override or extend it using this\r
# tag. The format is ext=language, where ext is a file extension, and language\r
# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,\r
# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make\r
# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C\r
# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions\r
# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.\r
\r
EXTENSION_MAPPING      =\r
\r
# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want\r
# to include (a tag file for) the STL sources as input, then you should\r
# set this tag to YES in order to let doxygen match functions declarations and\r
# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.\r
# func(std::string) {}). This also makes the inheritance and collaboration\r
# diagrams that involve STL classes more complete and accurate.\r
\r
BUILTIN_STL_SUPPORT    = NO\r
\r
# If you use Microsoft's C++/CLI language, you should set this option to YES to\r
# enable parsing support.\r
\r
CPP_CLI_SUPPORT        = NO\r
\r
# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.\r
# Doxygen will parse them like normal C++ but will assume all classes use public\r
# instead of private inheritance when no explicit protection keyword is present.\r
\r
SIP_SUPPORT            = NO\r
\r
# For Microsoft's IDL there are propget and propput attributes to indicate getter\r
# and setter methods for a property. Setting this option to YES (the default)\r
# will make doxygen replace the get and set methods by a property in the\r
# documentation. This will only work if the methods are indeed getting or\r
# setting a simple type. If this is not the case, or you want to show the\r
# methods anyway, you should set this option to NO.\r
\r
IDL_PROPERTY_SUPPORT   = YES\r
\r
# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC\r
# tag is set to YES, then doxygen will reuse the documentation of the first\r
# member in the group (if any) for the other members of the group. By default\r
# all members of a group must be documented explicitly.\r
\r
DISTRIBUTE_GROUP_DOC   = NO\r
\r
# Set the SUBGROUPING tag to YES (the default) to allow class member groups of\r
# the same type (for instance a group of public functions) to be put as a\r
# subgroup of that type (e.g. under the Public Functions section). Set it to\r
# NO to prevent subgrouping. Alternatively, this can be done per class using\r
# the \nosubgrouping command.\r
\r
SUBGROUPING            = YES\r
\r
# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and\r
# unions are shown inside the group in which they are included (e.g. using\r
# @ingroup) instead of on a separate page (for HTML and Man pages) or\r
# section (for LaTeX and RTF).\r
\r
INLINE_GROUPED_CLASSES = NO\r
\r
# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum\r
# is documented as struct, union, or enum with the name of the typedef. So\r
# typedef struct TypeS {} TypeT, will appear in the documentation as a struct\r
# with name TypeT. When disabled the typedef will appear as a member of a file,\r
# namespace, or class. And the struct will be named TypeS. This can typically\r
# be useful for C code in case the coding convention dictates that all compound\r
# types are typedef'ed and only the typedef is referenced, never the tag name.\r
\r
TYPEDEF_HIDES_STRUCT   = NO\r
\r
# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to\r
# determine which symbols to keep in memory and which to flush to disk.\r
# When the cache is full, less often used symbols will be written to disk.\r
# For small to medium size projects (<1000 input files) the default value is\r
# probably good enough. For larger projects a too small cache size can cause\r
# doxygen to be busy swapping symbols to and from disk most of the time\r
# causing a significant performance penalty.\r
# If the system has enough physical memory increasing the cache will improve the\r
# performance by keeping more symbols in memory. Note that the value works on\r
# a logarithmic scale so increasing the size by one will roughly double the\r
# memory usage. The cache size is given by this formula:\r
# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,\r
# corresponding to a cache size of 2^16 = 65536 symbols\r
\r
SYMBOL_CACHE_SIZE      = 0\r
\r
#---------------------------------------------------------------------------\r
# Build related configuration options\r
#---------------------------------------------------------------------------\r
\r
# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in\r
# documentation are documented, even if no documentation was available.\r
# Private class members and static file members will be hidden unless\r
# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES\r
\r
EXTRACT_ALL            = NO\r
\r
# If the EXTRACT_PRIVATE tag is set to YES all private members of a class\r
# will be included in the documentation.\r
\r
EXTRACT_PRIVATE        = NO\r
\r
# If the EXTRACT_STATIC tag is set to YES all static members of a file\r
# will be included in the documentation.\r
\r
EXTRACT_STATIC         = YES\r
\r
# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)\r
# defined locally in source files will be included in the documentation.\r
# If set to NO only classes defined in header files are included.\r
\r
EXTRACT_LOCAL_CLASSES  = NO\r
\r
# This flag is only useful for Objective-C code. When set to YES local\r
# methods, which are defined in the implementation section but not in\r
# the interface are included in the documentation.\r
# If set to NO (the default) only methods in the interface are included.\r
\r
EXTRACT_LOCAL_METHODS  = NO\r
\r
# If this flag is set to YES, the members of anonymous namespaces will be\r
# extracted and appear in the documentation as a namespace called\r
# 'anonymous_namespace{file}', where file will be replaced with the base\r
# name of the file that contains the anonymous namespace. By default\r
# anonymous namespaces are hidden.\r
\r
EXTRACT_ANON_NSPACES   = NO\r
\r
# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all\r
# undocumented members of documented classes, files or namespaces.\r
# If set to NO (the default) these members will be included in the\r
# various overviews, but no documentation section is generated.\r
# This option has no effect if EXTRACT_ALL is enabled.\r
\r
HIDE_UNDOC_MEMBERS     = YES\r
\r
# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all\r
# undocumented classes that are normally visible in the class hierarchy.\r
# If set to NO (the default) these classes will be included in the various\r
# overviews. This option has no effect if EXTRACT_ALL is enabled.\r
\r
HIDE_UNDOC_CLASSES     = YES\r
\r
# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all\r
# friend (class|struct|union) declarations.\r
# If set to NO (the default) these declarations will be included in the\r
# documentation.\r
\r
HIDE_FRIEND_COMPOUNDS  = YES\r
\r
# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any\r
# documentation blocks found inside the body of a function.\r
# If set to NO (the default) these blocks will be appended to the\r
# function's detailed documentation block.\r
\r
HIDE_IN_BODY_DOCS      = YES\r
\r
# The INTERNAL_DOCS tag determines if documentation\r
# that is typed after a \internal command is included. If the tag is set\r
# to NO (the default) then the documentation will be excluded.\r
# Set it to YES to include the internal documentation.\r
\r
INTERNAL_DOCS          = NO\r
\r
# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate\r
# file names in lower-case letters. If set to YES upper-case letters are also\r
# allowed. This is useful if you have classes or files whose names only differ\r
# in case and if your file system supports case sensitive file names. Windows\r
# and Mac users are advised to set this option to NO.\r
\r
CASE_SENSE_NAMES       = YES\r
\r
# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen\r
# will show members with their full class and namespace scopes in the\r
# documentation. If set to YES the scope will be hidden.\r
\r
HIDE_SCOPE_NAMES       = NO\r
\r
# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen\r
# will put a list of the files that are included by a file in the documentation\r
# of that file.\r
\r
SHOW_INCLUDE_FILES     = NO\r
\r
# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen\r
# will list include files with double quotes in the documentation\r
# rather than with sharp brackets.\r
\r
FORCE_LOCAL_INCLUDES   = NO\r
\r
# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]\r
# is inserted in the documentation for inline members.\r
\r
INLINE_INFO            = YES\r
\r
# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen\r
# will sort the (detailed) documentation of file and class members\r
# alphabetically by member name. If set to NO the members will appear in\r
# declaration order.\r
\r
SORT_MEMBER_DOCS       = YES\r
\r
# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the\r
# brief documentation of file, namespace and class members alphabetically\r
# by member name. If set to NO (the default) the members will appear in\r
# declaration order.\r
\r
SORT_BRIEF_DOCS        = YES\r
\r
# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen\r
# will sort the (brief and detailed) documentation of class members so that\r
# constructors and destructors are listed first. If set to NO (the default)\r
# the constructors will appear in the respective orders defined by\r
# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.\r
# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO\r
# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.\r
\r
SORT_MEMBERS_CTORS_1ST = NO\r
\r
# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the\r
# hierarchy of group names into alphabetical order. If set to NO (the default)\r
# the group names will appear in their defined order.\r
\r
SORT_GROUP_NAMES       = NO\r
\r
# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be\r
# sorted by fully-qualified names, including namespaces. If set to\r
# NO (the default), the class list will be sorted only by class name,\r
# not including the namespace part.\r
# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.\r
# Note: This option applies only to the class list, not to the\r
# alphabetical list.\r
\r
SORT_BY_SCOPE_NAME     = YES\r
\r
# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to\r
# do proper type resolution of all parameters of a function it will reject a\r
# match between the prototype and the implementation of a member function even\r
# if there is only one candidate or it is obvious which candidate to choose\r
# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen\r
# will still accept a match between prototype and implementation in such cases.\r
\r
STRICT_PROTO_MATCHING  = NO\r
\r
# The GENERATE_TODOLIST tag can be used to enable (YES) or\r
# disable (NO) the todo list. This list is created by putting \todo\r
# commands in the documentation.\r
\r
GENERATE_TODOLIST      = YES\r
\r
# The GENERATE_TESTLIST tag can be used to enable (YES) or\r
# disable (NO) the test list. This list is created by putting \test\r
# commands in the documentation.\r
\r
GENERATE_TESTLIST      = NO\r
\r
# The GENERATE_BUGLIST tag can be used to enable (YES) or\r
# disable (NO) the bug list. This list is created by putting \bug\r
# commands in the documentation.\r
\r
GENERATE_BUGLIST       = NO\r
\r
# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or\r
# disable (NO) the deprecated list. This list is created by putting\r
# \deprecated commands in the documentation.\r
\r
GENERATE_DEPRECATEDLIST= YES\r
\r
# The ENABLED_SECTIONS tag can be used to enable conditional\r
# documentation sections, marked by \if sectionname ... \endif.\r
\r
ENABLED_SECTIONS       = \r
\r
# The MAX_INITIALIZER_LINES tag determines the maximum number of lines\r
# the initial value of a variable or macro consists of for it to appear in\r
# the documentation. If the initializer consists of more lines than specified\r
# here it will be hidden. Use a value of 0 to hide initializers completely.\r
# The appearance of the initializer of individual variables and macros in the\r
# documentation can be controlled using \showinitializer or \hideinitializer\r
# command in the documentation regardless of this setting.\r
\r
MAX_INITIALIZER_LINES  = 30\r
\r
# Set the SHOW_USED_FILES tag to NO to disable the list of files generated\r
# at the bottom of the documentation of classes and structs. If set to YES the\r
# list will mention the files that were used to generate the documentation.\r
\r
SHOW_USED_FILES        = NO\r
\r
# If the sources in your project are distributed over multiple directories\r
# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy\r
# in the documentation. The default is NO.\r
\r
SHOW_DIRECTORIES       = NO\r
\r
# Set the SHOW_FILES tag to NO to disable the generation of the Files page.\r
# This will remove the Files entry from the Quick Index and from the\r
# Folder Tree View (if specified). The default is YES.\r
\r
SHOW_FILES             = YES\r
\r
# Set the SHOW_NAMESPACES tag to NO to disable the generation of the\r
# Namespaces page.\r
# This will remove the Namespaces entry from the Quick Index\r
# and from the Folder Tree View (if specified). The default is YES.\r
\r
SHOW_NAMESPACES        = YES\r
\r
# The FILE_VERSION_FILTER tag can be used to specify a program or script that\r
# doxygen should invoke to get the current version for each file (typically from\r
# the version control system). Doxygen will invoke the program by executing (via\r
# popen()) the command <command> <input-file>, where <command> is the value of\r
# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file\r
# provided by doxygen. Whatever the program writes to standard output\r
# is used as the file version. See the manual for examples.\r
\r
FILE_VERSION_FILTER    =\r
\r
# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed\r
# by doxygen. The layout file controls the global structure of the generated\r
# output files in an output format independent way. The create the layout file\r
# that represents doxygen's defaults, run doxygen with the -l option.\r
# You can optionally specify a file name after the option, if omitted\r
# DoxygenLayout.xml will be used as the name of the layout file.\r
\r
LAYOUT_FILE            = DoxygenLayout.xml\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to warning and progress messages\r
#---------------------------------------------------------------------------\r
\r
# The QUIET tag can be used to turn on/off the messages that are generated\r
# by doxygen. Possible values are YES and NO. If left blank NO is used.\r
\r
QUIET                  = YES\r
\r
# The WARNINGS tag can be used to turn on/off the warning messages that are\r
# generated by doxygen. Possible values are YES and NO. If left blank\r
# NO is used.\r
\r
WARNINGS               = YES\r
\r
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings\r
# for undocumented members. If EXTRACT_ALL is set to YES then this flag will\r
# automatically be disabled.\r
\r
WARN_IF_UNDOCUMENTED   = YES\r
\r
# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for\r
# potential errors in the documentation, such as not documenting some\r
# parameters in a documented function, or documenting parameters that\r
# don't exist or using markup commands wrongly.\r
\r
WARN_IF_DOC_ERROR      = YES\r
\r
# The WARN_NO_PARAMDOC option can be enabled to get warnings for\r
# functions that are documented, but have no documentation for their parameters\r
# or return value. If set to NO (the default) doxygen will only warn about\r
# wrong or incomplete parameter documentation, but not about the absence of\r
# documentation.\r
\r
WARN_NO_PARAMDOC       = NO\r
\r
# The WARN_FORMAT tag determines the format of the warning messages that\r
# doxygen can produce. The string should contain the $file, $line, and $text\r
# tags, which will be replaced by the file and line number from which the\r
# warning originated and the warning text. Optionally the format may contain\r
# $version, which will be replaced by the version of the file (if it could\r
# be obtained via FILE_VERSION_FILTER)\r
\r
WARN_FORMAT            = "$file:$line: $text"\r
\r
# The WARN_LOGFILE tag can be used to specify a file to which warning\r
# and error messages should be written. If left blank the output is written\r
# to stderr.\r
\r
WARN_LOGFILE           = warning.txt\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the input files\r
#---------------------------------------------------------------------------\r
\r
# The INPUT tag can be used to specify the files and/or directories that contain\r
# documented source files. You may enter file names like "myfile.cpp" or\r
# directories like "/usr/src/myproject". Separate the files or directories\r
# with spaces.\r
\r
INPUT                  = ../../../../../osp \\r
                         ./libraries                       \r
                         \r
\r
# This tag can be used to specify the character encoding of the source files\r
# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is\r
# also the default input encoding. Doxygen uses libiconv (or the iconv built\r
# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for\r
# the list of possible encodings.\r
\r
INPUT_ENCODING         = UTF-8\r
\r
# If the value of the INPUT tag contains directories, you can use the\r
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp\r
# and *.h) to filter out the source-files in the directories. If left\r
# blank the following patterns are tested:\r
# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh\r
# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py\r
# *.f90 *.f *.for *.vhd *.vhdl\r
\r
FILE_PATTERNS          = *.h\r
\r
# The RECURSIVE tag can be used to turn specify whether or not subdirectories\r
# should be searched for input files as well. Possible values are YES and NO.\r
# If left blank NO is used.\r
\r
RECURSIVE              = YES\r
\r
# The EXCLUDE tag can be used to specify files and/or directories that should\r
# excluded from the INPUT source files. This way you can easily exclude a\r
# subdirectory from a directory tree whose root is specified with the INPUT tag.\r
\r
EXCLUDE                = ../../../../../osp/FBaseSysLog.h \\r
                         ../../../../../osp/FXml.h \\r
                         ./libraries/newlib     \r
\r
# The EXCLUDE_SYMLINKS tag can be used select whether or not files or\r
# directories that are symbolic links (a Unix file system feature) are excluded\r
# from the input.\r
\r
EXCLUDE_SYMLINKS       = NO\r
\r
# If the value of the INPUT tag contains directories, you can use the\r
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude\r
# certain files from those directories. Note that the wildcards are matched\r
# against the file with absolute path, so to exclude all test directories\r
# for example use the pattern */test/*\r
\r
EXCLUDE_PATTERNS       = \r
\r
# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names\r
# (namespaces, classes, functions, etc.) that should be excluded from the\r
# output. The symbol name can be a fully qualified name, a word, or if the\r
# wildcard * is used, a substring. Examples: ANamespace, AClass,\r
# AClass::ANamespace, ANamespace::*Test\r
\r
EXCLUDE_SYMBOLS        =\r
\r
# The EXAMPLE_PATH tag can be used to specify one or more files or\r
# directories that contain example code fragments that are included (see\r
# the \include command).\r
\r
EXAMPLE_PATH           =\r
\r
# If the value of the EXAMPLE_PATH tag contains directories, you can use the\r
# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp\r
# and *.h) to filter out the source-files in the directories. If left\r
# blank all files are included.\r
\r
EXAMPLE_PATTERNS       =\r
\r
# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be\r
# searched for input files to be used with the \include or \dontinclude\r
# commands irrespective of the value of the RECURSIVE tag.\r
# Possible values are YES and NO. If left blank NO is used.\r
\r
EXAMPLE_RECURSIVE      = NO\r
\r
# The IMAGE_PATH tag can be used to specify one or more files or\r
# directories that contain image that are included in the documentation (see\r
# the \image command).\r
\r
IMAGE_PATH             = images\r
\r
# The INPUT_FILTER tag can be used to specify a program that doxygen should\r
# invoke to filter for each input file. Doxygen will invoke the filter program\r
# by executing (via popen()) the command <filter> <input-file>, where <filter>\r
# is the value of the INPUT_FILTER tag, and <input-file> is the name of an\r
# input file. Doxygen will then use the output that the filter program writes\r
# to standard output.\r
# If FILTER_PATTERNS is specified, this tag will be\r
# ignored.\r
\r
INPUT_FILTER           =\r
\r
# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern\r
# basis.\r
# Doxygen will compare the file name with each pattern and apply the\r
# filter if there is a match.\r
# The filters are a list of the form:\r
# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further\r
# info on how filters are used. If FILTER_PATTERNS is empty or if\r
# non of the patterns match the file name, INPUT_FILTER is applied.\r
\r
FILTER_PATTERNS        =\r
\r
# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using\r
# INPUT_FILTER) will be used to filter the input files when producing source\r
# files to browse (i.e. when SOURCE_BROWSER is set to YES).\r
\r
FILTER_SOURCE_FILES    = NO\r
\r
# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file\r
# pattern. A pattern will override the setting for FILTER_PATTERN (if any)\r
# and it is also possible to disable source filtering for a specific pattern\r
# using *.ext= (so without naming a filter). This option only has effect when\r
# FILTER_SOURCE_FILES is enabled.\r
\r
FILTER_SOURCE_PATTERNS =\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to source browsing\r
#---------------------------------------------------------------------------\r
\r
# If the SOURCE_BROWSER tag is set to YES then a list of source files will\r
# be generated. Documented entities will be cross-referenced with these sources.\r
# Note: To get rid of all source code in the generated output, make sure also\r
# VERBATIM_HEADERS is set to NO.\r
\r
SOURCE_BROWSER         = NO\r
\r
# Setting the INLINE_SOURCES tag to YES will include the body\r
# of functions and classes directly in the documentation.\r
\r
INLINE_SOURCES         = NO\r
\r
# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct\r
# doxygen to hide any special comment blocks from generated source code\r
# fragments. Normal C and C++ comments will always remain visible.\r
\r
STRIP_CODE_COMMENTS    = YES\r
\r
# If the REFERENCED_BY_RELATION tag is set to YES\r
# then for each documented function all documented\r
# functions referencing it will be listed.\r
\r
REFERENCED_BY_RELATION = NO\r
\r
# If the REFERENCES_RELATION tag is set to YES\r
# then for each documented function all documented entities\r
# called/used by that function will be listed.\r
\r
REFERENCES_RELATION    = NO\r
\r
# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)\r
# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from\r
# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will\r
# link to the source code.\r
# Otherwise they will link to the documentation.\r
\r
REFERENCES_LINK_SOURCE = NO\r
\r
# If the USE_HTAGS tag is set to YES then the references to source code\r
# will point to the HTML generated by the htags(1) tool instead of doxygen\r
# built-in source browser. The htags tool is part of GNU's global source\r
# tagging system (see http://www.gnu.org/software/global/global.html). You\r
# will need version 4.8.6 or higher.\r
\r
USE_HTAGS              = NO\r
\r
# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen\r
# will generate a verbatim copy of the header file for each class for\r
# which an include is specified. Set to NO to disable this.\r
\r
VERBATIM_HEADERS       = NO\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the alphabetical class index\r
#---------------------------------------------------------------------------\r
\r
# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index\r
# of all compounds will be generated. Enable this if the project\r
# contains a lot of classes, structs, unions or interfaces.\r
\r
ALPHABETICAL_INDEX     = YES\r
\r
# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then\r
# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns\r
# in which this list will be split (can be a number in the range [1..20])\r
\r
COLS_IN_ALPHA_INDEX    = 5\r
\r
# In case all classes in a project start with a common prefix, all\r
# classes will be put under the same header in the alphabetical index.\r
# The IGNORE_PREFIX tag can be used to specify one or more prefixes that\r
# should be ignored while generating the index headers.\r
\r
IGNORE_PREFIX          =\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the HTML output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_HTML tag is set to YES (the default) Doxygen will\r
# generate HTML output.\r
\r
GENERATE_HTML          = YES\r
\r
# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.\r
# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
# put in front of it. If left blank `html' will be used as the default path.\r
\r
HTML_OUTPUT            = apidocs\r
\r
# The HTML_FILE_EXTENSION tag can be used to specify the file extension for\r
# each generated HTML page (for example: .htm,.php,.asp). If it is left blank\r
# doxygen will generate files with .html extension.\r
\r
HTML_FILE_EXTENSION    = .html\r
\r
# The HTML_HEADER tag can be used to specify a personal HTML header for\r
# each generated HTML page. If it is left blank doxygen will generate a\r
# standard header. Note that when using a custom header you are responsible\r
# for the proper inclusion of any scripts and style sheets that doxygen\r
# needs, which is dependent on the configuration options used.\r
# It is adviced to generate a default header using "doxygen -w html\r
# header.html footer.html stylesheet.css YourConfigFile" and then modify\r
# that header. Note that the header is subject to change so you typically\r
# have to redo this when upgrading to a newer version of doxygen or when changing the value of configuration settings such as GENERATE_TREEVIEW!\r
\r
HTML_HEADER            =\r
\r
# The HTML_FOOTER tag can be used to specify a personal HTML footer for\r
# each generated HTML page. If it is left blank doxygen will generate a\r
# standard footer.\r
\r
HTML_FOOTER            = footer.html\r
\r
# The HTML_STYLESHEET tag can be used to specify a user-defined cascading\r
# style sheet that is used by each HTML page. It can be used to\r
# fine-tune the look of the HTML output. If the tag is left blank doxygen\r
# will generate a default style sheet. Note that doxygen will try to copy\r
# the style sheet file to the HTML output directory, so don't put your own\r
# stylesheet in the HTML output directory as well, or it will be erased!\r
\r
HTML_STYLESHEET        = Tizen.css\r
\r
# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or\r
# other source files which should be copied to the HTML output directory. Note\r
# that these files will be copied to the base HTML output directory. Use the\r
# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these\r
# files. In the HTML_STYLESHEET file, use the file name only. Also note that\r
# the files will be copied as-is; there are no commands or markers available.\r
\r
HTML_EXTRA_FILES       =\r
\r
# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.\r
# Doxygen will adjust the colors in the stylesheet and background images\r
# according to this color. Hue is specified as an angle on a colorwheel,\r
# see http://en.wikipedia.org/wiki/Hue for more information.\r
# For instance the value 0 represents red, 60 is yellow, 120 is green,\r
# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.\r
# The allowed range is 0 to 359.\r
\r
HTML_COLORSTYLE_HUE    = 220\r
\r
# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of\r
# the colors in the HTML output. For a value of 0 the output will use\r
# grayscales only. A value of 255 will produce the most vivid colors.\r
\r
HTML_COLORSTYLE_SAT    = 100\r
\r
# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to\r
# the luminance component of the colors in the HTML output. Values below\r
# 100 gradually make the output lighter, whereas values above 100 make\r
# the output darker. The value divided by 100 is the actual gamma applied,\r
# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,\r
# and 100 does not change the gamma.\r
\r
HTML_COLORSTYLE_GAMMA  = 80\r
\r
# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML\r
# page will contain the date and time when the page was generated. Setting\r
# this to NO can help when comparing the output of multiple runs.\r
\r
HTML_TIMESTAMP         = YES\r
\r
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,\r
# files or namespaces will be aligned in HTML using tables. If set to\r
# NO a bullet list will be used.\r
\r
HTML_ALIGN_MEMBERS     = YES\r
\r
# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML\r
# documentation will contain sections that can be hidden and shown after the\r
# page has loaded. For this to work a browser that supports\r
# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox\r
# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari).\r
\r
HTML_DYNAMIC_SECTIONS  = NO\r
\r
# If the GENERATE_DOCSET tag is set to YES, additional index files\r
# will be generated that can be used as input for Apple's Xcode 3\r
# integrated development environment, introduced with OSX 10.5 (Leopard).\r
# To create a documentation set, doxygen will generate a Makefile in the\r
# HTML output directory. Running make will produce the docset in that\r
# directory and running "make install" will install the docset in\r
# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find\r
# it at startup.\r
# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html\r
# for more information.\r
\r
GENERATE_DOCSET        = NO\r
\r
# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the\r
# feed. A documentation feed provides an umbrella under which multiple\r
# documentation sets from a single provider (such as a company or product suite)\r
# can be grouped.\r
\r
DOCSET_FEEDNAME        = "Doxygen generated docs"\r
\r
# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that\r
# should uniquely identify the documentation set bundle. This should be a\r
# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen\r
# will append .docset to the name.\r
\r
DOCSET_BUNDLE_ID       = org.doxygen.Project\r
\r
# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify\r
# the documentation publisher. This should be a reverse domain-name style\r
# string, e.g. com.mycompany.MyDocSet.documentation.\r
\r
DOCSET_PUBLISHER_ID    = org.doxygen.Publisher\r
\r
# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.\r
\r
DOCSET_PUBLISHER_NAME  = Publisher\r
\r
# If the GENERATE_HTMLHELP tag is set to YES, additional index files\r
# will be generated that can be used as input for tools like the\r
# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)\r
# of the generated HTML documentation.\r
\r
GENERATE_HTMLHELP      = YES\r
\r
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can\r
# be used to specify the file name of the resulting .chm file. You\r
# can add a path in front of the file if the result should not be\r
# written to the html output directory.\r
\r
CHM_FILE               =\r
\r
# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can\r
# be used to specify the location (absolute path including file name) of\r
# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run\r
# the HTML help compiler on the generated index.hhp.\r
\r
HHC_LOCATION           =\r
\r
# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag\r
# controls if a separate .chi index file is generated (YES) or that\r
# it should be included in the master .chm file (NO).\r
\r
GENERATE_CHI           = NO\r
\r
# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING\r
# is used to encode HtmlHelp index (hhk), content (hhc) and project file\r
# content.\r
\r
CHM_INDEX_ENCODING     =\r
\r
# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag\r
# controls whether a binary table of contents is generated (YES) or a\r
# normal table of contents (NO) in the .chm file.\r
\r
BINARY_TOC             = YES\r
\r
# The TOC_EXPAND flag can be set to YES to add extra items for group members\r
# to the contents of the HTML help documentation and to the tree view.\r
\r
TOC_EXPAND             = YES\r
\r
# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and\r
# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated\r
# that can be used as input for Qt's qhelpgenerator to generate a\r
# Qt Compressed Help (.qch) of the generated HTML documentation.\r
\r
GENERATE_QHP           = NO\r
\r
# If the QHG_LOCATION tag is specified, the QCH_FILE tag can\r
# be used to specify the file name of the resulting .qch file.\r
# The path specified is relative to the HTML output folder.\r
\r
QCH_FILE               =\r
\r
# The QHP_NAMESPACE tag specifies the namespace to use when generating\r
# Qt Help Project output. For more information please see\r
# http://doc.trolltech.com/qthelpproject.html#namespace\r
\r
QHP_NAMESPACE          = org.doxygen.Project\r
\r
# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating\r
# Qt Help Project output. For more information please see\r
# http://doc.trolltech.com/qthelpproject.html#virtual-folders\r
\r
QHP_VIRTUAL_FOLDER     = doc\r
\r
# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to\r
# add. For more information please see\r
# http://doc.trolltech.com/qthelpproject.html#custom-filters\r
\r
QHP_CUST_FILTER_NAME   =\r
\r
# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the\r
# custom filter to add. For more information please see\r
# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">\r
# Qt Help Project / Custom Filters</a>.\r
\r
QHP_CUST_FILTER_ATTRS  =\r
\r
# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this\r
# project's\r
# filter section matches.\r
# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">\r
# Qt Help Project / Filter Attributes</a>.\r
\r
QHP_SECT_FILTER_ATTRS  =\r
\r
# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can\r
# be used to specify the location of Qt's qhelpgenerator.\r
# If non-empty doxygen will try to run qhelpgenerator on the generated\r
# .qhp file.\r
\r
QHG_LOCATION           =\r
\r
# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files\r
#  will be generated, which together with the HTML files, form an Eclipse help\r
# plugin. To install this plugin and make it available under the help contents\r
# menu in Eclipse, the contents of the directory containing the HTML and XML\r
# files needs to be copied into the plugins directory of eclipse. The name of\r
# the directory within the plugins directory should be the same as\r
# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before\r
# the help appears.\r
\r
GENERATE_ECLIPSEHELP   = YES\r
\r
# A unique identifier for the eclipse help plugin. When installing the plugin\r
# the directory name containing the HTML and XML files should also have\r
# this name.\r
\r
ECLIPSE_DOC_ID         = org.doxygen.Project\r
\r
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at\r
# top of each HTML page. The value NO (the default) enables the index and\r
# the value YES disables it.\r
\r
DISABLE_INDEX          = NO\r
\r
# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values\r
# (range [0,1..20]) that doxygen will group on one line in the generated HTML\r
# documentation. Note that a value of 0 will completely suppress the enum\r
# values from appearing in the overview section.\r
\r
ENUM_VALUES_PER_LINE   = 4\r
\r
# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index\r
# structure should be generated to display hierarchical information.\r
# If the tag value is set to YES, a side panel will be generated\r
# containing a tree-like index structure (just like the one that\r
# is generated for HTML Help). For this to work a browser that supports\r
# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).\r
# Windows users are probably better off using the HTML help feature.\r
\r
GENERATE_TREEVIEW      = NO\r
\r
# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,\r
# and Class Hierarchy pages using a tree view instead of an ordered list.\r
\r
USE_INLINE_TREES       = NO\r
\r
# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be\r
# used to set the initial width (in pixels) of the frame in which the tree\r
# is shown.\r
\r
TREEVIEW_WIDTH         = 250\r
\r
# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open\r
# links to external symbols imported via tag files in a separate window.\r
\r
EXT_LINKS_IN_WINDOW    = NO\r
\r
# Use this tag to change the font size of Latex formulas included\r
# as images in the HTML documentation. The default is 10. Note that\r
# when you change the font size after a successful doxygen run you need\r
# to manually remove any form_*.png images from the HTML output directory\r
# to force them to be regenerated.\r
\r
FORMULA_FONTSIZE       = 10\r
\r
# Use the FORMULA_TRANPARENT tag to determine whether or not the images\r
# generated for formulas are transparent PNGs. Transparent PNGs are\r
# not supported properly for IE 6.0, but are supported on all modern browsers.\r
# Note that when changing this option you need to delete any form_*.png files\r
# in the HTML output before the changes have effect.\r
\r
FORMULA_TRANSPARENT    = YES\r
\r
# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax\r
# (see http://www.mathjax.org) which uses client side Javascript for the\r
# rendering instead of using prerendered bitmaps. Use this if you do not\r
# have LaTeX installed or if you want to formulas look prettier in the HTML\r
# output. When enabled you also need to install MathJax separately and\r
# configure the path to it using the MATHJAX_RELPATH option.\r
\r
USE_MATHJAX            = NO\r
\r
# When MathJax is enabled you need to specify the location relative to the\r
# HTML output directory using the MATHJAX_RELPATH option. The destination\r
# directory should contain the MathJax.js script. For instance, if the mathjax\r
# directory is located at the same level as the HTML output directory, then\r
# MATHJAX_RELPATH should be ../mathjax. The default value points to the\r
# mathjax.org site, so you can quickly see the result without installing\r
# MathJax, but it is strongly recommended to install a local copy of MathJax\r
# before deployment.\r
\r
MATHJAX_RELPATH        = http://www.mathjax.org/mathjax\r
\r
# When the SEARCHENGINE tag is enabled doxygen will generate a search box\r
# for the HTML output. The underlying search engine uses javascript\r
# and DHTML and should work on any modern browser. Note that when using\r
# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets\r
# (GENERATE_DOCSET) there is already a search function so this one should\r
# typically be disabled. For large projects the javascript based search engine\r
# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.\r
\r
SEARCHENGINE           = NO\r
\r
# When the SERVER_BASED_SEARCH tag is enabled the search engine will be\r
# implemented using a PHP enabled web server instead of at the web client\r
# using Javascript. Doxygen will generate the search PHP script and index\r
# file to put on the web server. The advantage of the server\r
# based approach is that it scales better to large projects and allows\r
# full text search. The disadvantages are that it is more difficult to setup\r
# and does not have live searching capabilities.\r
\r
SERVER_BASED_SEARCH    = NO\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the LaTeX output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will\r
# generate Latex output.\r
\r
GENERATE_LATEX         = NO\r
\r
# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.\r
# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
# put in front of it. If left blank `latex' will be used as the default path.\r
\r
LATEX_OUTPUT           = latex\r
\r
# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be\r
# invoked. If left blank `latex' will be used as the default command name.\r
# Note that when enabling USE_PDFLATEX this option is only used for\r
# generating bitmaps for formulas in the HTML output, but not in the\r
# Makefile that is written to the output directory.\r
\r
LATEX_CMD_NAME         = latex\r
\r
# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to\r
# generate index for LaTeX. If left blank `makeindex' will be used as the\r
# default command name.\r
\r
MAKEINDEX_CMD_NAME     = makeindex\r
\r
# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact\r
# LaTeX documents. This may be useful for small projects and may help to\r
# save some trees in general.\r
\r
COMPACT_LATEX          = NO\r
\r
# The PAPER_TYPE tag can be used to set the paper type that is used\r
# by the printer. Possible values are: a4, letter, legal and\r
# executive. If left blank a4wide will be used.\r
\r
PAPER_TYPE             = a4wide\r
\r
# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX\r
# packages that should be included in the LaTeX output.\r
\r
EXTRA_PACKAGES         =\r
\r
# The LATEX_HEADER tag can be used to specify a personal LaTeX header for\r
# the generated latex document. The header should contain everything until\r
# the first chapter. If it is left blank doxygen will generate a\r
# standard header. Notice: only use this tag if you know what you are doing!\r
\r
LATEX_HEADER           =\r
\r
# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for\r
# the generated latex document. The footer should contain everything after\r
# the last chapter. If it is left blank doxygen will generate a\r
# standard footer. Notice: only use this tag if you know what you are doing!\r
\r
LATEX_FOOTER           =\r
\r
# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated\r
# is prepared for conversion to pdf (using ps2pdf). The pdf file will\r
# contain links (just like the HTML output) instead of page references\r
# This makes the output suitable for online browsing using a pdf viewer.\r
\r
PDF_HYPERLINKS         = NO\r
\r
# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of\r
# plain latex in the generated Makefile. Set this option to YES to get a\r
# higher quality PDF documentation.\r
\r
USE_PDFLATEX           = NO\r
\r
# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.\r
# command to the generated LaTeX files. This will instruct LaTeX to keep\r
# running if errors occur, instead of asking the user for help.\r
# This option is also used when generating formulas in HTML.\r
\r
LATEX_BATCHMODE        = NO\r
\r
# If LATEX_HIDE_INDICES is set to YES then doxygen will not\r
# include the index chapters (such as File Index, Compound Index, etc.)\r
# in the output.\r
\r
LATEX_HIDE_INDICES     = NO\r
\r
# If LATEX_SOURCE_CODE is set to YES then doxygen will include\r
# source code with syntax highlighting in the LaTeX output.\r
# Note that which sources are shown also depends on other settings\r
# such as SOURCE_BROWSER.\r
\r
LATEX_SOURCE_CODE      = NO\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the RTF output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output\r
# The RTF output is optimized for Word 97 and may not look very pretty with\r
# other RTF readers or editors.\r
\r
GENERATE_RTF           = NO\r
\r
# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.\r
# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
# put in front of it. If left blank `rtf' will be used as the default path.\r
\r
RTF_OUTPUT             = rtf\r
\r
# If the COMPACT_RTF tag is set to YES Doxygen generates more compact\r
# RTF documents. This may be useful for small projects and may help to\r
# save some trees in general.\r
\r
COMPACT_RTF            = NO\r
\r
# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated\r
# will contain hyperlink fields. The RTF file will\r
# contain links (just like the HTML output) instead of page references.\r
# This makes the output suitable for online browsing using WORD or other\r
# programs which support those fields.\r
# Note: wordpad (write) and others do not support links.\r
\r
RTF_HYPERLINKS         = NO\r
\r
# Load stylesheet definitions from file. Syntax is similar to doxygen's\r
# config file, i.e. a series of assignments. You only have to provide\r
# replacements, missing definitions are set to their default value.\r
\r
RTF_STYLESHEET_FILE    =\r
\r
# Set optional variables used in the generation of an rtf document.\r
# Syntax is similar to doxygen's config file.\r
\r
RTF_EXTENSIONS_FILE    =\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the man page output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_MAN tag is set to YES (the default) Doxygen will\r
# generate man pages\r
\r
GENERATE_MAN           = NO\r
\r
# The MAN_OUTPUT tag is used to specify where the man pages will be put.\r
# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
# put in front of it. If left blank `man' will be used as the default path.\r
\r
MAN_OUTPUT             = man\r
\r
# The MAN_EXTENSION tag determines the extension that is added to\r
# the generated man pages (default is the subroutine's section .3)\r
\r
MAN_EXTENSION          = .3\r
\r
# If the MAN_LINKS tag is set to YES and Doxygen generates man output,\r
# then it will generate one additional man file for each entity\r
# documented in the real man page(s). These additional files\r
# only source the real man page, but without them the man command\r
# would be unable to find the correct page. The default is NO.\r
\r
MAN_LINKS              = NO\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the XML output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_XML tag is set to YES Doxygen will\r
# generate an XML file that captures the structure of\r
# the code including all documentation.\r
\r
GENERATE_XML           = NO\r
\r
# The XML_OUTPUT tag is used to specify where the XML pages will be put.\r
# If a relative path is entered the value of OUTPUT_DIRECTORY will be\r
# put in front of it. If left blank `xml' will be used as the default path.\r
\r
XML_OUTPUT             = _xml\r
\r
# The XML_SCHEMA tag can be used to specify an XML schema,\r
# which can be used by a validating XML parser to check the\r
# syntax of the XML files.\r
\r
XML_SCHEMA             =\r
\r
# The XML_DTD tag can be used to specify an XML DTD,\r
# which can be used by a validating XML parser to check the\r
# syntax of the XML files.\r
\r
XML_DTD                =\r
\r
# If the XML_PROGRAMLISTING tag is set to YES Doxygen will\r
# dump the program listings (including syntax highlighting\r
# and cross-referencing information) to the XML output. Note that\r
# enabling this will significantly increase the size of the XML output.\r
\r
XML_PROGRAMLISTING     = YES\r
\r
#---------------------------------------------------------------------------\r
# configuration options for the AutoGen Definitions output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will\r
# generate an AutoGen Definitions (see autogen.sf.net) file\r
# that captures the structure of the code including all\r
# documentation. Note that this feature is still experimental\r
# and incomplete at the moment.\r
\r
GENERATE_AUTOGEN_DEF   = NO\r
\r
#---------------------------------------------------------------------------\r
# configuration options related to the Perl module output\r
#---------------------------------------------------------------------------\r
\r
# If the GENERATE_PERLMOD tag is set to YES Doxygen will\r
# generate a Perl module file that captures the structure of\r
# the code including all documentation. Note that this\r
# feature is still experimental and incomplete at the\r
# moment.\r
\r
GENERATE_PERLMOD       = NO\r
\r
# If the PERLMOD_LATEX tag is set to YES Doxygen will generate\r
# the necessary Makefile rules, Perl scripts and LaTeX code to be able\r
# to generate PDF and DVI output from the Perl module output.\r
\r
PERLMOD_LATEX          = NO\r
\r
# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be\r
# nicely formatted so it can be parsed by a human reader.\r
# This is useful\r
# if you want to understand what is going on.\r
# On the other hand, if this\r
# tag is set to NO the size of the Perl module output will be much smaller\r
# and Perl will parse it just the same.\r
\r
PERLMOD_PRETTY         = YES\r
\r
# The names of the make variables in the generated doxyrules.make file\r
# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.\r
# This is useful so different doxyrules.make files included by the same\r
# Makefile don't overwrite each other's variables.\r
\r
PERLMOD_MAKEVAR_PREFIX =\r
\r
#---------------------------------------------------------------------------\r
# Configuration options related to the preprocessor\r
#---------------------------------------------------------------------------\r
\r
# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will\r
# evaluate all C-preprocessor directives found in the sources and include\r
# files.\r
\r
ENABLE_PREPROCESSING   = YES\r
\r
# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro\r
# names in the source code. If set to NO (the default) only conditional\r
# compilation will be performed. Macro expansion can be done in a controlled\r
# way by setting EXPAND_ONLY_PREDEF to YES.\r
\r
MACRO_EXPANSION        = YES\r
\r
# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES\r
# then the macro expansion is limited to the macros specified with the\r
# PREDEFINED and EXPAND_AS_DEFINED tags.\r
\r
EXPAND_ONLY_PREDEF     = YES\r
\r
# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files\r
# pointed to by INCLUDE_PATH will be searched when a #include is found.\r
\r
SEARCH_INCLUDES        = YES\r
\r
# The INCLUDE_PATH tag can be used to specify one or more directories that\r
# contain include files that are not input files but should be processed by\r
# the preprocessor.\r
\r
INCLUDE_PATH           =\r
\r
# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard\r
# patterns (like *.h and *.hpp) to filter out the header-files in the\r
# directories. If left blank, the patterns specified with FILE_PATTERNS will\r
# be used.\r
\r
INCLUDE_FILE_PATTERNS  =\r
\r
# The PREDEFINED tag can be used to specify one or more macro names that\r
# are defined before the preprocessor is started (similar to the -D option of\r
# gcc). The argument of the tag is a list of macros of the form: name\r
# or name=definition (no spaces). If the definition and the = are\r
# omitted =1 is assumed. To prevent a macro definition from being\r
# undefined via #undef or recursively expanded use the := operator\r
# instead of the = operator.\r
\r
PREDEFINED             = LIBXML_OUTPUT_ENABLED LIBXML_PUSH_ENABLED LIBXML_TREE_ENABLED LIBXML_HTML_ENABLED GL_API GL_APICALL _OSP_EXPORT_= _OSP_LOCAL_=\r
\r
# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then\r
# this tag can be used to specify a list of macro names that should be expanded.\r
# The macro definition that is found in the sources will be used.\r
# Use the PREDEFINED tag if you want to use a different macro definition that\r
# overrules the definition found in the source code.\r
\r
EXPAND_AS_DEFINED      =\r
\r
# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then\r
# doxygen's preprocessor will remove all references to function-like macros\r
# that are alone on a line, have an all uppercase name, and do not end with a\r
# semicolon, because these will confuse the parser if not removed.\r
\r
SKIP_FUNCTION_MACROS   = YES\r
\r
#---------------------------------------------------------------------------\r
# Configuration::additions related to external references\r
#---------------------------------------------------------------------------\r
\r
# The TAGFILES option can be used to specify one or more tagfiles.\r
# Optionally an initial location of the external documentation\r
# can be added for each tagfile. The format of a tag file without\r
# this location is as follows:\r
#\r
# TAGFILES = file1 file2 ...\r
# Adding location for the tag files is done as follows:\r
#\r
# TAGFILES = file1=loc1 "file2 = loc2" ...\r
# where "loc1" and "loc2" can be relative or absolute paths or\r
# URLs. If a location is present for each tag, the installdox tool\r
# does not have to be run to correct the links.\r
# Note that each tag file must have a unique name\r
# (where the name does NOT include the path)\r
# If a tag file is not located in the directory in which doxygen\r
# is run, you must also specify the path to the tagfile here.\r
\r
TAGFILES               =\r
\r
# When a file name is specified after GENERATE_TAGFILE, doxygen will create\r
# a tag file that is based on the input files it reads.\r
\r
GENERATE_TAGFILE       =\r
\r
# If the ALLEXTERNALS tag is set to YES all external classes will be listed\r
# in the class index. If set to NO only the inherited external classes\r
# will be listed.\r
\r
ALLEXTERNALS           = NO\r
\r
# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed\r
# in the modules index. If set to NO, only the current project's groups will\r
# be listed.\r
\r
EXTERNAL_GROUPS        = YES\r
\r
# The PERL_PATH should be the absolute path and name of the perl script\r
# interpreter (i.e. the result of `which perl').\r
\r
PERL_PATH              = /usr/bin/perl\r
\r
#---------------------------------------------------------------------------\r
# Configuration options related to the dot tool\r
#---------------------------------------------------------------------------\r
\r
# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will\r
# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base\r
# or super classes. Setting the tag to NO turns the diagrams off. Note that\r
# this option also works with HAVE_DOT disabled, but it is recommended to\r
# install and use dot, since it yields more powerful graphs.\r
\r
CLASS_DIAGRAMS         = YES\r
\r
# You can define message sequence charts within doxygen comments using the \msc\r
# command. Doxygen will then run the mscgen tool (see\r
# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the\r
# documentation. The MSCGEN_PATH tag allows you to specify the directory where\r
# the mscgen tool resides. If left empty the tool is assumed to be found in the\r
# default search path.\r
\r
MSCGEN_PATH            =\r
\r
# If set to YES, the inheritance and collaboration graphs will hide\r
# inheritance and usage relations if the target is undocumented\r
# or is not a class.\r
\r
HIDE_UNDOC_RELATIONS   = YES\r
\r
# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is\r
# available from the path. This tool is part of Graphviz, a graph visualization\r
# toolkit from AT&T and Lucent Bell Labs. The other options in this section\r
# have no effect if this option is set to NO (the default)\r
\r
HAVE_DOT               = NO\r
\r
# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is\r
# allowed to run in parallel. When set to 0 (the default) doxygen will\r
# base this on the number of processors available in the system. You can set it\r
# explicitly to a value larger than 0 to get control over the balance\r
# between CPU load and processing speed.\r
\r
DOT_NUM_THREADS        = 0\r
\r
# By default doxygen will write a font called Helvetica to the output\r
# directory and reference it in all dot files that doxygen generates.\r
# When you want a differently looking font you can specify the font name\r
# using DOT_FONTNAME. You need to make sure dot is able to find the font,\r
# which can be done by putting it in a standard location or by setting the\r
# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory\r
# containing the font.\r
\r
DOT_FONTNAME           = FreeSans\r
\r
# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.\r
# The default size is 10pt.\r
\r
DOT_FONTSIZE           = 10\r
\r
# By default doxygen will tell dot to use the output directory to look for the\r
# FreeSans.ttf font (which doxygen will put there itself). If you specify a\r
# different font using DOT_FONTNAME you can set the path where dot\r
# can find it using this tag.\r
\r
DOT_FONTPATH           =\r
\r
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen\r
# will generate a graph for each documented class showing the direct and\r
# indirect inheritance relations. Setting this tag to YES will force the\r
# the CLASS_DIAGRAMS tag to NO.\r
\r
CLASS_GRAPH            = YES\r
\r
# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen\r
# will generate a graph for each documented class showing the direct and\r
# indirect implementation dependencies (inheritance, containment, and\r
# class references variables) of the class with other documented classes.\r
\r
COLLABORATION_GRAPH    = YES\r
\r
# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen\r
# will generate a graph for groups, showing the direct groups dependencies\r
\r
GROUP_GRAPHS           = YES\r
\r
# If the UML_LOOK tag is set to YES doxygen will generate inheritance and\r
# collaboration diagrams in a style similar to the OMG's Unified Modeling\r
# Language.\r
\r
UML_LOOK               = NO\r
\r
# If set to YES, the inheritance and collaboration graphs will show the\r
# relations between templates and their instances.\r
\r
TEMPLATE_RELATIONS     = NO\r
\r
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT\r
# tags are set to YES then doxygen will generate a graph for each documented\r
# file showing the direct and indirect include dependencies of the file with\r
# other documented files.\r
\r
INCLUDE_GRAPH          = YES\r
\r
# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and\r
# HAVE_DOT tags are set to YES then doxygen will generate a graph for each\r
# documented header file showing the documented files that directly or\r
# indirectly include this file.\r
\r
INCLUDED_BY_GRAPH      = YES\r
\r
# If the CALL_GRAPH and HAVE_DOT options are set to YES then\r
# doxygen will generate a call dependency graph for every global function\r
# or class method. Note that enabling this option will significantly increase\r
# the time of a run. So in most cases it will be better to enable call graphs\r
# for selected functions only using the \callgraph command.\r
\r
CALL_GRAPH             = NO\r
\r
# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then\r
# doxygen will generate a caller dependency graph for every global function\r
# or class method. Note that enabling this option will significantly increase\r
# the time of a run. So in most cases it will be better to enable caller\r
# graphs for selected functions only using the \callergraph command.\r
\r
CALLER_GRAPH           = NO\r
\r
# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen\r
# will generate a graphical hierarchy of all classes instead of a textual one.\r
\r
GRAPHICAL_HIERARCHY    = YES\r
\r
# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES\r
# then doxygen will show the dependencies a directory has on other directories\r
# in a graphical way. The dependency relations are determined by the #include\r
# relations between the files in the directories.\r
\r
DIRECTORY_GRAPH        = YES\r
\r
# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images\r
# generated by dot. Possible values are svg, png, jpg, or gif.\r
# If left blank png will be used.\r
\r
DOT_IMAGE_FORMAT       = png\r
\r
# The tag DOT_PATH can be used to specify the path where the dot tool can be\r
# found. If left blank, it is assumed the dot tool can be found in the path.\r
\r
DOT_PATH               =\r
\r
# The DOTFILE_DIRS tag can be used to specify one or more directories that\r
# contain dot files that are included in the documentation (see the\r
# \dotfile command).\r
\r
DOTFILE_DIRS           =\r
\r
# The MSCFILE_DIRS tag can be used to specify one or more directories that\r
# contain msc files that are included in the documentation (see the\r
# \mscfile command).\r
\r
MSCFILE_DIRS           =\r
\r
# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of\r
# nodes that will be shown in the graph. If the number of nodes in a graph\r
# becomes larger than this value, doxygen will truncate the graph, which is\r
# visualized by representing a node as a red box. Note that doxygen if the\r
# number of direct children of the root node in a graph is already larger than\r
# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note\r
# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.\r
\r
DOT_GRAPH_MAX_NODES    = 50\r
\r
# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the\r
# graphs generated by dot. A depth value of 3 means that only nodes reachable\r
# from the root by following a path via at most 3 edges will be shown. Nodes\r
# that lay further from the root node will be omitted. Note that setting this\r
# option to 1 or 2 may greatly reduce the computation time needed for large\r
# code bases. Also note that the size of a graph can be further restricted by\r
# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.\r
\r
MAX_DOT_GRAPH_DEPTH    = 0\r
\r
# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent\r
# background. This is disabled by default, because dot on Windows does not\r
# seem to support this out of the box. Warning: Depending on the platform used,\r
# enabling this option may lead to badly anti-aliased labels on the edges of\r
# a graph (i.e. they become hard to read).\r
\r
DOT_TRANSPARENT        = NO\r
\r
# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output\r
# files in one run (i.e. multiple -o and -T options on the command line). This\r
# makes dot run faster, but since only newer versions of dot (>1.8.10)\r
# support this, this feature is disabled by default.\r
\r
DOT_MULTI_TARGETS      = NO\r
\r
# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will\r
# generate a legend page explaining the meaning of the various boxes and\r
# arrows in the dot generated graphs.\r
\r
GENERATE_LEGEND        = YES\r
\r
# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will\r
# remove the intermediate dot files that are used to generate\r
# the various graphs.\r
\r
DOT_CLEANUP            = YES\r