3 * WARNING: Future backward-incompatibilities!
5 - Future versions of Automake will likely drop support for the
6 long-deprecated 'configure.in' name for the Autoconf input file.
7 You are advised to use the recommended name 'configure.ac' instead.
9 - Autoconf 2.65 or later will be required by the next major Automake
10 version (1.13). Until now, Automake has required Autoconf version
13 - Starting from the next major Automake version (1.13), the rules to
14 build pdf, ps and dvi output from Texinfo input will use the '--tidy'
15 option by default. Since such an option was introduced in Texinfo
16 4.9, this means that Makefiles generated by future Automake versions
17 will require at least that version of Texinfo.
19 - Starting from the next major Automake version (1.13), the parallel
20 testsuite harness (previously only enabled by the 'parallel-tests'
21 option) will become the default one; the older serial testsuite
22 harness will still be available through the use of the 'serial-tests'
25 - The following long-obsolete m4 macros will be removed in the
26 next major Automake version (1.13):
28 AM_PROG_CC_STDC: superseded by AC_PROG_CC since October 2002
29 fp_PROG_CC_STDC: broken alias for AM_PROG_CC_STDC
30 fp_WITH_DMALLOC: old alias for AM_WITH_DMALLOC
31 AM_CONFIG_HEADER: superseded by AC_CONFIG_HEADERS since July 2002
32 ud_PATH_LISPDIR: old alias for AM_PATH_LISPDIR
33 jm_MAINTAINER_MODE: old alias for AM_MAINTAINER_MODE
34 ud_GNU_GETTEXT: old alias for AM_GNU_GETTEXT
35 gm_PROG_LIBTOOL: old alias for AC_PROG_LIBTOOL
36 fp_C_PROTOTYPES: old alias for AM_C_PROTOTYPES (which was part
37 of the now-removed automatic de-ANSI-fication
40 - All the "old alias" macros in 'm4/obsolete.m4' will be removed in
41 the next major Automake version (1.13).
43 - Support for the two- and three-arguments invocation forms of the
44 AM_INIT_AUTOMAKE macro will be deprecated in the next minor version
45 of Automake (1.12.1) and removed in the next major version (1.13).
47 - The '--acdir' option of aclocal is deprecated, and will probably
48 be removed in the next major Automake release (1.13). You should
49 use the options '--automake-acdir' and '--system-acdir' instead
50 (which have been introduced in Automake 1.11.2).
52 - The exact order in which the directories in the aclocal macro
53 search path are looked up is probably going to be changed in the
54 next Automake release (1.13).
56 * Warnings and deprecations:
58 - Automake now issues a warning (in the 'portability' category) if
59 'configure.in' is used instead of 'configure.ac' as the Autoconf
60 input file. Such a warning will also be present in the next
61 Autoconf version (2.70).
65 - Recursive cleaning rules descends into the $(SUBDIRS) in the natural
66 order (as done by the other recursive rules), rather than in the
67 inverse order. They used to do that in order to work a round a
68 limitation in an older implementation of the automatic dependency
69 tracking support, but that limitation had been lifted years ago
70 already, when the automatic dependency tracking based on side-effects
71 of compilation had been introduced.
73 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
77 * New supported languages:
79 - Support for Objective C++ has been added; it should work similarly to
80 the support for Objective C.
82 * Deprecated obsolescent features:
84 - Use of the long-deprecated two- and three-arguments invocation forms
85 of the AM_INIT_AUTOMAKE macro now elicits a warning in the 'obsolete'
86 category. Starting from the next major Automake release (1.13), such
87 usages won't be allowed anymore.
89 - Support for the "Cygnus-style" trees (enabled by the 'cygnus' option) is
90 now deprecated (its use triggers a warning in the 'obsolete' category).
91 It will be removed in the next major Automake release (1.13).
93 - The long-obsolete (since 1.10) automake-provided $(mkdir_p) make
94 variable, @mkdir_p@ configure-time substitution and AM_PROG_MKDIR
95 m4 macro are deprecated, eliciting a warning in the 'obsolete'
96 category. They will be removed in the next major version (1.13).
98 * Miscellaneous changes:
100 - The Automake test cases now require a proper POSIX-conforming shell.
101 Older non-POSIX Bourne shells (like Solaris 10 /bin/sh) won't be
102 accepted anymore. In most cases, the user shouldn't have to specify
103 such POSIX shell explicitly, since it will be looked up at configure
104 time. Still, when this lookup fails, or when the user wants to
105 override its conclusion, the variable 'AM_TEST_RUNNER_SHELL' can be
106 used (pointing to the shell that will be used to run the Automake
109 Bugs fixed in 1.12.1:
111 * Bugs introduced by 1.12:
113 - Several weaknesses in Automake's own build system and test suite
116 * Bugs introduced by 1.11.3:
118 - When given non-option arguments, aclocal rejects them, instead of
119 silently ignoring them.
121 * Long-standing bugs:
123 - When the 'color-tests' option is in use, forcing of colored testsuite
124 output through "AM_COLOR_TESTS=always" works even if the terminal is
125 a non-ANSI one, i.e., if the TERM environment variable has a value of
128 - Several inefficiencies and poor performances in the implementation
129 of the parallel-tests 'check' and 'recheck' targets have been fixed.
131 - The post-processing of output "#line" directives done the ylwrap
132 script is more faithful w.r.t. files in a subdirectory; for example,
133 if the processed file is "src/grammar.y", ylwrap will correctly
134 produce directives like:
135 #line 7 "src/grammar.y"
140 * Bugs with new Perl versions:
142 - Aclocal works correctly with perl 5.16.0 (automake bug#11543).
144 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
148 * Obsolete features removed:
150 - The never documented nor truly used script 'acinstall' has been
153 - Support for automatic de-ANSI-fication has been removed.
155 - The support for the "obscure" multilib feature has been removed
156 from Automake core (but remains available in the 'contrib/'
157 directory of the Automake distribution).
159 - Support for ".log -> .html" conversion and the check-html and
160 recheck-html targets has been removed from Automake core (but
161 remains available in the 'contrib/' directory of the Automake
164 - The deprecated 'lzma' compression format for distribution archives
165 has been removed, in favor of 'xz' and 'lzip'.
167 - The obsolete AM_WITH_REGEX macro has been removed.
169 - The long-deprecated options '--output-dir', '--Werror' and
170 '--Wno-error' have been removed.
172 - The chapter on the history of Automake has been moved out of the
173 reference manual, into a new dedicated Texinfo file.
177 - New 'cscope' target to build a cscope database for the source tree.
179 * Changes to Automake-generated testsuite harnesses:
181 - The new automake option 'serial-tests' has been introduced. It can
182 be used to explicitly instruct automake to use the older serial
183 testsuite harness. This is still the default at the moment, but it
184 might change in future versions.
186 - The 'recheck' target (provided by the parallel testsuite harness) now
187 depends on the 'all' target. This allows for a better user-experience
188 in test-driven development. See automake bug#11252.
190 - Test scripts that exit with status 99 to signal an "hard error" (e.g.,
191 and unexpected or internal error, or a failure to set up the test case
192 scenario) have their outcome reported as an 'ERROR' now. Previous
193 versions of automake reported such an outcome as a 'FAIL' (the only
194 difference with normal failures being that hard errors were counted
195 as failures even when the test originating them was listed in
198 - The testsuite summary displayed by the parallel-test harness has a
199 completely new format, that always list the numbers of passed, failed,
200 xfailed, xpassed, skipped and errored tests, even when these numbers
201 are zero (but using smart coloring when the color-tests option is in
204 - The default testsuite driver offered by the 'parallel-tests' option is
205 now implemented (partly at least) with the help of automake-provided
206 auxiliary scripts (e.g., 'test-driver'), instead of relying entirely
207 on code in the generated Makefile.in.
208 This has two noteworthy implications. The first one is that projects
209 using the 'parallel-tests' option should now either run automake with
210 the '--add-missing' option, or manually copy the 'test-driver' script
211 into their tree. The second, and more important, implication is that
212 now, when the 'parallel-tests' option is in use, TESTS_ENVIRONMENT can
213 not be used anymore to define a test runner, and the command specified
214 in LOG_COMPILER (and <ext>_LOG_COMPILER) must be a *real* executable
215 program or script. For example, this is still a valid usage (albeit
218 TESTS_ENVIRONMENT = \
219 if test -n '$(STRICT_TESTS)'; then \
220 maybe_errexit='-e'; \
224 LOG_COMPILER = $(SHELL) $$maybe_errexit
226 while this is not anymore:
228 TESTS_ENVIRONMENT = \
229 $(SHELL) `test -n '$(STRICT_TESTS_CHECKING)' && echo ' -e'`
233 TESTS_ENVIRONMENT = \
234 run_with_perl_or_shell () \
236 if grep -q '^#!.*perl' $$1; then
242 LOG_COMPILER = run_with_perl_or_shell
244 - The package authors can now use customary testsuite drivers within
245 the framework provided by the 'parallel-tests' testsuite harness.
246 Consistently with the existing syntax, this can be done by defining
247 special makefile variables 'LOG_DRIVER' and '<ext>_LOG_DRIVER'.
249 - A new developer-reserved variable 'AM_TESTS_FD_REDIRECT' can be used
250 to redirect/define file descriptors used by the test scripts.
252 - The parallel-tests harness generates now, in addition the '.log' files
253 holding the output produced by the test scripts, a new set of '.trs'
254 files, holding "metadata" derived by the execution of the test scripts;
255 among such metadata are the outcomes of the test cases run by a script.
257 - Initial and still experimental support for the TAP test protocol is
260 * Changes to Yacc and Lex support:
262 - C source and header files derived from non-distributed Yacc and/or
263 Lex sources are now removed by a simple "make clean" (while they were
264 previously removed only by "make maintainer-clean").
266 - Slightly backward-incompatible change, relevant only for use of Yacc
267 with C++: the extensions of the header files produced by the Yacc
268 rules are now modelled after the extension of the corresponding
269 sources. For example, yacc files named "foo.y++" and "bar.yy" will
270 produce header files named "foo.h++" and "bar.hh" respectively, where
271 they would have previously produced header files named simply "foo.h"
272 and "bar.h". This change offers better compatibility with 'bison -o'.
274 * Miscellaneous changes:
276 - The AM_PROG_VALAC macro now causes configure to exit with status 77,
277 rather than 1, if the vala compiler found is too old.
279 - The build system of Automake itself now avoids the use of make
280 recursion as much as possible.
282 - Automake now prefers to quote 'like this' or "like this", rather
283 than `like this', in diagnostic message and generated Makefiles,
284 to accommodate the new GNU Coding Standards recommendations.
286 - Automake has a new option '--print-libdir' that prints the path of the
287 directory containing the Automake-provided scripts and data files.
289 - The 'dist' and 'dist-all' targets now can run compressors in parallel.
291 - The rules to create pdf, dvi and ps output from Texinfo files now
292 works better with modern 'texi2dvi' script, by explicitly passing
293 it the '--clean' option to ensure stray auxiliary files are not
294 left to clutter the build directory.
296 - Automake can now generate silenced rules for texinfo outputs.
298 - Some auxiliary files that are automatically distributed by Automake
299 (e.g., 'install-sh', or the 'depcomp' script for packages compiling
300 C sources) might now be listed in the DIST_COMMON variable in many
301 Makefile.in files, rather than in the top-level one.
303 - Messages of types warning or error from 'automake' and 'aclocal'
304 are now prefixed with the respective type, and presence of -Werror
307 - Automake's early configure-time sanity check now tries to avoid
308 sleeping for a second, which slowed down cached configure runs
309 noticeably. In that case, it will check back at the end of the
310 configure script to ensure that at least one second has passed, to
311 avoid time stamp issues with makefile rules rerunning autotools
314 - The warnings in the category 'extra-portability' are now enabled by
315 '-Wall'. In previous versions, one has to use '-Wextra-portability'
320 - Various minor bugfixes for recent or long-standing bugs.
322 * Bugs introduced by 1.11:
324 - The AM_COND_IF macro also works if the shell expression for the
325 conditional is no longer valid for the condition.
327 - The automake-provided parallel testsuite harness does not fail anymore
328 with BSD make used in parallel mode when there are test scripts in a
329 subdirectory, like in:
331 TESTS = sub/foo.test sub/bar.test
333 * Long-standing bugs:
335 - Automake's own build system finally have a real "installcheck" target.
337 - Vala-related cleanup rules are now more complete, and work better in
340 - Files listed with the AC_REQUIRE_AUX_FILE macro in configure.ac are
341 now automatically distributed also if the directory of the auxiliary
342 files coincides with the top-level directory.
344 - Automake now detects the presence of the '-d' flag in the various
345 '*YFLAGS' variables even when their definitions involve indirections
346 through other variables, such as in:
348 AM_YFLAGS = $(foo_opts)
350 - Automake now complains if a '*YFLAGS' variable has any conditional
351 content, not only a conditional definition.
353 - Explicit enabling and/or disabling of Automake warning categories
354 through the '-W...' options now always takes precedence over the
355 implicit warning level implied by Automake strictness (foreign, gnu
356 or gnits), regardless of the order in which such strictness and
357 warning flags appear. For example, a setting like:
358 AUTOMAKE_OPTIONS = -Wall --foreign
359 will cause the warnings in category 'portability' to be enabled, even
360 if those warnings are by default disabled in 'foreign' strictness.
362 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
364 Bugs fixed in 1.11.5:
366 * Bugs introduced by 1.11.3:
368 - Vala files with '.vapi' extension are now recognized and handled
369 correctly again. See automake bug#11222.
371 - Vala support work again for projects that contain some program
372 built from '.vala' (and possibly '.c') sources and some other
373 program built from '.c' sources *only*. See automake bug#11229.
375 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
379 * Miscellaneous changes:
381 - The 'ar-lib' script now ignores the "s" (symbol index) and "S" (no
382 symbol index) modifiers as well as the "s" action, as the symbol index
383 is created unconditionally by Microsoft lib. Also, the "q" (quick)
384 action is now a synonym for "r" (replace). Also, the script has been
385 ignoring the "v" (verbose) modifier already since Automake 1.11.3.
387 - When the 'compile' script is used to wrap MSVC, it now accepts an
388 optional space between the -I, -L and -l options and their respective
389 arguments, for better POSIX compliance.
391 - There is an initial, experimental support for automatic dependency
392 tracking with tcc (the Tiny C Compiler). Its associated depmode is
393 currently recognized as "icc" (but this and other details are likely
394 to change in future versions).
396 - Automatic dependency tracking now works also with the IBM XL C/C++
397 compilers, thanks to the new new depmode 'xlc'.
399 Bugs fixed in 1.11.4:
401 * Bugs introduced by 1.11.2:
403 - A definition of 'noinst_PYTHON' before 'python_PYTHON' (or similar)
404 don't cause spurious failures upon "make install" anymore.
406 - The user can now instruct the 'uninstall-info' rule not to update
407 the '${infodir}/dir' file by exporting the environment variable
408 'AM_UPDATE_INFO_DIR' to the value "no". This is done for consistency
409 with how the 'install-info' rule operates since automake 1.11.2.
411 * Long-standing bugs:
413 - It is now possible for a foo_SOURCES variable to hold Vala sources
414 together with C header files, as well as with sources and headers for
415 other supported languages (e.g., C++). Previously, only mixing C and
416 Vala sources was supported.
418 - If "aclocal --install" is used, and the first directory specified with
419 '-I' is non-existent, aclocal will now create it before trying to copy
422 - An empty declaration of a "foo_PRIMARY" don't cause anymore the
423 generated install rules to create an empty $(foodir) directory;
424 for example, if Makefile.am contains something like:
428 pkglibexec_SCRIPTS += bar.sh
431 the $(pkglibexec) directory will not be created upon "make install".
433 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
437 * Miscellaneous changes:
439 - Automake's own build system is more silent by default, making use of
440 the 'silent-rules' option.
442 - The master copy of the `gnupload' script is now maintained in gnulib,
445 - The `missing' script doesn't try to wrap calls to `tar' anymore.
447 - "make dist" doesn't wrap `tar' invocations with the `missing' script
448 anymore. Similarly, the obsolescent variable `$(AMTAR)' (which you
449 shouldn't be using BTW ;-) does not invoke the missing script anymore
450 to wrap tar, but simply invokes the `tar' program itself.
452 - "make dist" can now create lzip-compressed tarballs.
454 - In the Automake info documentation, the Top node and the nodes about
455 the invocation of the automake and aclocal programs have been renamed;
456 now, calling "info automake" will open the Top node, while calling
457 "info automake-invocation" and "info aclocal-invocation" will access
458 the nodes about the invocation of respectively automake and aclocal.
460 - Automake is now distributed as a gzip-compressed and an xz-compressed
461 tarball. Previously, bzip2 was used instead of xz.
463 - The last relics of Python 1.5 support have been removed from the
464 AM_PATH_PYTHON macro.
466 - For programs and libraries, automake now detects EXTRA_foo_DEPENDENCIES
467 and adds them to the normal list of dependencies, but without
468 overwriting the foo_DEPENDENCIES variable, which is normally computed
471 Bugs fixed in 1.11.3:
473 * Bugs introduced by 1.11.2:
475 - Automake now correctly recognizes the prefix/primary combination
476 `pkglibexec_SCRIPTS' as valid.
478 - The parallel-tests harness doesn't trip anymore on sed implementations
479 with stricter limits on the length of input lines (problem seen at
482 * Long-standing bugs:
484 - The "deleted header file problem" for *.am files is avoided by stub
485 rules. This allows `make' to trigger a rerun of `automake' also if
486 some previously needed `.am' file has been removed.
488 - The `silent-rules' option now generates working makefiles even
489 for the uncommon `make' implementations that do not support the
490 nested-variables extension to POSIX 2008. For such `make'
491 implementations, whether a build is silent is determined at
492 configure time, and cannot be overridden at make time with
493 `make V=0' or `make V=1'.
495 - Vala support now works better in VPATH setups.
497 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
501 * Changes to aclocal:
503 - The `--acdir' option is deprecated. Now you should use the new options
504 `--automake-acdir' and `--system-acdir' instead.
506 - The `ACLOCAL_PATH' environment variable is now interpreted as a
507 colon-separated list of additional directories to search after the
508 automake internal acdir (by default ${prefix}/share/aclocal-APIVERSION)
509 and before the system acdir (by default ${prefix}/share/aclocal).
511 * Miscellaneous changes:
513 - The Automake support for automatic de-ANSI-fication has been
514 deprecated. It will probably be removed in the next major Automake
517 - The `lzma' compression scheme and associated automake option `dist-lzma'
518 is obsoleted by `xz' and `dist-xz' due to upstream changes.
520 - You may adjust the compression options used in dist-xz and dist-bzip2.
521 The default is now merely -e for xz, but still -9 for bzip; you may
522 specify a different level via the XZ_OPT and BZIP2 envvars respectively.
523 E.g., "make dist-xz XZ_OPT=-7" or "make dist-bzip2 BZIP2=-5"
525 - The `compile' script now converts some options for MSVC for a better
526 user experience. Similarly, the new `ar-lib' script wraps Microsoft lib.
528 - The py-compile script now accepts empty arguments passed to the options
529 `--destdir' and `--basedir', and complains about unrecognized options.
530 Moreover, a non-option argument or a special `--' argument terminates
533 - A developer that needs to pass specific flags to configure at "make
534 distcheck" time can now, and indeed is advised to, do so by defining
535 the developer-reserved makefile variable AM_DISTCHECK_CONFIGURE_FLAGS,
536 instead of the old DISTCHECK_CONFIGURE_FLAGS.
537 The DISTCHECK_CONFIGURE_FLAGS variable should now be reserved for the
538 user; still, the old Makefile.am files that used to define it will
539 still continue to work as before.
541 - New macro AM_PROG_AR that looks for an archiver and wraps it in the new
542 'ar-lib' auxiliary script if the selected archiver is Microsoft lib.
543 This new macro is required for LIBRARIES and LTLIBRARIES when automake
544 is run with -Wextra-portability and -Werror.
546 - When using DejaGnu-based testsuites, the user can extend the `site.exp'
547 file generated by automake-provided rules by defining the special make
548 variable `$(EXTRA_DEJAGNU_SITE_CONFIG)'.
550 - The `install-info' rule can now be instructed not to create/update
551 the `${infodir}/dir' file, by exporting the new environment variable
552 `AM_UPDATE_INFO_DIR' to the value "no".
554 Bugs fixed in 1.11.2:
556 * Bugs introduced by 1.11:
558 - The parallel-tests driver no longer produces erroneous results with
559 Tru64/OSF 5.1 sh upon unreadable log files.
561 - The `parallel-tests' test driver does not report spurious successes
562 when used with concurrent FreeBSD make (e.g., "make check -j3").
564 - When the parallel-tests driver is in use, automake now explicitly
565 rejects invalid entries and conditional contents in TEST_EXTENSIONS,
566 instead of issuing confusing and apparently unrelated error messages
567 (e.g., "non-POSIX variable name", "bad characters in variable name",
568 or "redefinition of TEST_EXTENSIONS), or even, in some situations,
569 silently producing broken `Makefile.in' files.
571 - The `silent-rules' option now truly silences all compile rules, even
572 when dependency tracking is disabled. Also, when `silent-rules' is
573 not used, `make' output no longer contains spurious backslash-only
574 lines, thus once again matching what Automake did before 1.11.
576 - The AM_COND_IF macro also works if the shell expression for the
577 conditional is no longer valid for the condition.
579 * Long-standing bugs:
581 - The order of Yacc and Lex flags is fixed to be consistent with other
582 languages: $(AM_YFLAGS) comes before $(YFLAGS), and $(AM_LFLAGS) before
583 $(LFLAGS), so that the user variables override the developer variables.
585 - "make distcheck" now correctly complains also when "make uninstall"
586 leaves one and only one file installed in $(prefix).
588 - A "make uninstall" issued before a "make install", or after a mere
589 "make install-data" or a mere "make install-exec" does not spuriously
592 - Automake now warns about more primary/directory invalid combinations,
593 such as "doc_LIBRARIES" or "pkglib_PROGRAMS".
595 - Rules generated by Automake now try harder to not change any files when
596 `make -n' is invoked. Fixes include compilation of Emacs Lisp, Vala, or
597 Yacc source files and the rule to update config.h.
599 - Several scripts and the parallel-tests testsuite driver now exit with
600 the right exit status upon receiving a signal.
602 - A per-Makefile.am setting of -Werror does not erroneously carry over
603 to the handling of other Makefile.am files.
605 - The code for automatic dependency tracking works around a Solaris
606 make bug triggered by sources containing repeated slashes when the
607 `subdir-objects' option was used.
609 - The makedepend and hp depmodes now work better with VPATH builds.
611 - Java sources specified with check_JAVA are no longer compiled for
612 "make all", but only for "make check".
614 - An usage like "java_JAVA = foo.java" will now cause Automake to warn
615 and error out if `javadir' is undefined, instead of silently producing
616 a broken Makefile.in.
618 - aclocal and automake now honour the configure-time definitions of
619 AUTOCONF and AUTOM4TE when they spawn autoconf or autom4te processes.
621 - The `install-info' recipe no longer tries to guess whether the
622 `install-info' program is from Debian or from GNU, and adaptively
623 change its behaviour; this has proven to be frail and easy to
626 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
628 Bugs fixed in 1.11.1:
630 - Lots of minor bugfixes.
632 * Bugs introduced by 1.11:
634 - The `parallel-tests' test driver works around a GNU make 3.80 bug with
635 trailing white space in the test list (`TESTS = foo $(EMPTY)').
637 * Long standing bugs:
639 - On Darwin 9, `pythondir' and `pyexecdir' pointed below `/Library/Python'
640 even if the `--prefix' argument pointed outside of a system directory.
641 AM_PATH_PYTHON has been fixed to ignore the value returned from python's
642 `get_python_lib' function if it points outside the configured prefix,
643 unless the `--prefix' argument was either `/usr' or below `/System'.
645 - The testsuite does not try to change the mode of `ltmain.sh' files from
646 a Libtool installation (symlinked to test directories) any more.
648 - AM_PROG_GCJ uses AC_CHECK_TOOLS to look for `gcj' now, so that prefixed
649 tools are preferred in a cross-compile setup.
651 - The distribution is tarred up with mode 755 now by the `dist*' targets.
652 This fixes a race condition where untrusted users could modify files
653 in the $(PACKAGE)-$(VERSION) distdir before packing if the toplevel
654 build directory was world-searchable. This is CVE-2009-4029.
656 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
660 * Version requirements:
662 - Autoconf 2.62 or greater is required.
664 * Changes to aclocal:
666 - The autoconf version check implemented by aclocal in aclocal.m4
667 (and new in Automake 1.10) is degraded to a warning. This helps
668 in the common case where the Autoconf versions used are compatible.
670 * Changes to automake:
672 - The automake program can run multiple threads for creating most
673 Makefile.in files concurrently, if at least Perl 5.7.2 is available
674 with interpreter-based threads enabled. Set the environment variable
675 AUTOMAKE_JOBS to the maximum number of threads to use, in order to
676 enable this experimental feature.
678 * Changes to Libtool support:
680 - Libtool generic flags are now passed to the install and uninstall
683 - distcheck works with Libtool 2.x even when LT_OUTPUT is used, as
684 config.lt is removed correctly now.
688 - subdir-object mode works now with Fortran (F77, FC, preprocessed
689 Fortran, and Ratfor).
691 - For files with extension .f90, .f95, .f03, or .f08, the flag
692 $(FCFLAGS_f[09]x) computed by AC_FC_SRCEXT is now used in compile rules.
694 - Files with extension .sx are also treated as preprocessed assembler.
696 - The default source file extension (.c) can be overridden with
697 AM_DEFAULT_SOURCE_EXT now.
699 - Python 3.0 is supported now, Python releases prior to 2.0 are no
702 - AM_PATH_PYTHON honors python's idea about the site directory.
704 - There is initial support for the Vala programming language, when using
707 * Miscellaneous changes:
709 - Automake development is done in a git repository on Savannah now, see
711 http://git.sv.gnu.org/gitweb/?p=automake.git
713 A read-only CVS mirror is provided at
715 cvs -d :pserver:anonymous@pserver.git.sv.gnu.org:/automake.git \
716 checkout -d automake HEAD
718 - "make dist" can now create xz-compressed tarballs,
719 as well as (deprecated?) lzma-compressed tarballs.
721 - `automake --add-missing' will by default install the GPLv3 file as
722 COPYING if it is missing. It will also warn that the license file
723 should be added to source control. Note that Automake will never
724 overwrite an existing COPYING file, even when the `--force-missing'
727 - The manual is now distributed under the terms of the GNU FDL 1.3.
729 - Automake ships and installs man pages for automake and aclocal now.
731 - New shorthand `$(pkglibexecdir)' for `$(libexecdir)/@PACKAGE@'.
733 - install-sh supports -C, which does not update the installed file
734 (and its time stamps) if the contents did not change.
736 - The `gnupload' script has been revamped.
738 - The `depcomp' and `compile' scripts now work with MSVC under MSYS.
740 - The targets `install' and `uninstall' are more efficient now, in that
741 for example multiple files from one Automake variable such as
742 `bin_SCRIPTS' are copied in one `install' (or `libtool --mode=install')
743 invocation if they do not have to be renamed.
745 Both install and uninstall may sometimes enter (`cd' into) the target
746 installation directory now, when no build-local scripts are used.
748 Both install and uninstall do not fail anymore but do nothing if an
749 installation directory variable like `bindir' is set to the empty string.
751 For built-in rules, `make install' now fails reliably if installation
752 of a file failed. Conversely, `make uninstall' even succeeds when
753 issued multiple times.
755 These changes may need some adjustments from users: For example,
756 some `install' programs refuse to install multiple copies of the
757 same file in one invocation, so you may need to remove duplicate
758 entries from file lists.
760 Also, within one set of files, say, nobase_data_DATA, the order of
761 installation may be changed, or even unstable among different hosts,
762 due to the use of associative arrays in awk. The increased use of
763 awk matches a similar move in Autoconf to provide for better scaling.
765 Further, most undocumented per-rule install command variables such as
766 binSCRIPT_INSTALL have been removed because they are not needed any
767 more. Packages which use them should be using the appropriate one of
768 INSTALL_{DATA,PROGRAM,SCRIPT} or their install_sh_{DATA,PROGRAM,SCRIPT}
769 counterpart, depending on the type of files and the need for automatic
770 target directory creation.
772 - The "deleted header file problem" for *.m4 files is avoided by
773 stub rules. This allows `make' to trigger a rerun of `aclocal'
774 also if some previously needed macro file has been removed.
776 - Rebuild rules now also work for a removed `subdir/Makefile.in' in
777 an otherwise up to date tree.
779 - The `color-tests' option causes colored test result output on terminals.
781 - The `parallel-tests' option enables a new test driver that allows for
782 parallel test execution, inter-test dependencies, lazy test execution
783 for unit-testing, re-testing only failed tests, and formatted result output
784 as RST (reStructuredText) and HTML. Enabling this option may require some
785 changes to your test suite setup; see the manual for details.
787 - The `silent-rules' option enables Linux kernel-style silent build output.
788 This option requires the widely supported but non-POSIX `make' feature
789 of recursive variable expansion, so do not use it if your package needs
790 to build with `make' implementations that do not support it.
792 To enable less verbose build output, the developer has to use the Automake
793 option `silent-rules' in `AM_INIT_AUTOMAKE', or call the `AM_SILENT_RULES'
794 macro. The user may then set the default verbosity by passing the
795 `--enable-silent-rules' option to `configure'. At `make' run time, this
796 default may be overridden using `make V=0' for less verbose, and `make V=1'
797 for backward-compatible verbose output.
799 - New prefix `notrans_' for manpages which should not be transformed
800 by --program-transform.
802 - New macro AM_COND_IF for conditional evaluation and conditional
805 - For AC_CONFIG_LINKS, if source and destination are equal, do not
806 remove the file in a non-VPATH build. Such setups work with Autoconf
809 - AM_MAINTAINER_MODE now allows for an optional argument specifying
812 - AM_SUBST_NOTMAKE may prevent substitution of AC_SUBSTed variables,
813 useful especially for multi-line values.
815 - Automake's early configure-time sanity check now diagnoses an
816 unsafe absolute source directory name and makes configure fail.
818 - The Automake macros and rules cope better with whitespace in the
819 current directory name, as long as the relative path to `configure'
820 does not contain whitespace. To this end, the values of `$(MISSING)'
821 and `$(install_sh)' may contain suitable quoting, and their expansion
822 might need `eval'uation if used outside of a makefile. These
823 undocumented variables may be used in several documented macros such
824 as $(AUTOCONF) or $(MAKEINFO).
828 * Long-standing bugs:
830 - Fix aix dependency tracking for libtool objects.
832 - Work around AIX sh quoting issue in AC_PROG_CC_C_O, leading to
833 unnecessary use of the `compile' script.
835 - For nobase_*_LTLIBRARIES with nonempty directory components, the
836 correct `-rpath' argument is used now.
838 - `config.status --file=Makefile depfiles' now also works with the
839 extra quoting used internally by Autoconf 2.62 and newer
840 (it used to work only without the `--file=' bit).
842 - The `missing' script works better with versioned tool names.
844 - Semantics for `missing help2man' have been revamped:
846 Previously, if `help2man' was not present, `missing help2man' would have
847 the following semantics: if some man page was out of date but present, then
848 a warning would be printed, but the exit status was 0. If the man page was
849 not present at all, then `missing' would create a replacement man page
850 containing an error message, and exit with a status of 2. This does not play
851 well with `make': the next run will see this particular man page as being up
852 to date, and will only error out on the next generated man page, if any;
853 repeat until all pages are done. This was not desirable.
855 These are the new semantics: if some man page is not present, and help2man
856 is not either, then `missing' will warn and generate the replacement page
857 containing the error message, but exit successfully. However, `make dist'
858 will ensure that no such bogus man pages are packaged into a tarball.
860 - Targets provided by automake behave better with `make -n', in that they
861 take care not to create files.
863 - `config.status Makefile... depfiles' works fine again in the presence of
864 disabled dependency tracking.
866 - The default no-op recursive rules for these targets also work with BSD make
867 now: html, install-html, install-dvi, install-pdf, install-pdf, install-info.
869 - `make distcheck' works also when both a directory and some file below it
870 have been added to a distribution variable, such as EXTRA_DIST or *_SOURCES.
872 - Texinfo dvi, ps, pdf, and html output files are not removed upon
873 `make mostlyclean' any more; only the LaTeX by-products are.
875 - Renamed objects also work with the `subdir-objects' option and
876 source file languages which Automake does not know itself.
878 - `automake' now correctly complains about variable assignments which are
879 preceded by a comment, extend over multiple lines with backslash-escaped
880 newlines, and end in a comment sign. Previous versions would silently
881 and wrongly ignore such assignments completely.
883 * Bugs introduced by 1.10:
885 - Fix output of dummy dependency files in presence of post-processed
886 Makefile.in's again, but also cope with long lines.
888 - $(EXEEXT) is automatically appended to filenames of XFAIL_TESTS
889 that have been declared as programs in the same Makefile.
890 This is for consistency with the analogous change to TESTS in 1.10.
892 - Fix order of standard includes to again be `-I. -I$(srcdir)',
893 followed by directories containing config headers.
895 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
899 * Version requirements:
901 - Autoconf 2.60 or greater is required.
903 - Perl 5.6 or greater is required.
905 * Changes to aclocal:
907 - aclocal now also supports -Wmumble and -Wno-mumble options.
909 - `dirlist' entries (for the aclocal search path) may use shell
910 wildcards such as `*', `?', or `[...]'.
912 - aclocal supports an --install option that will cause system-wide
913 third-party macros to be installed in the local directory
914 specified with the first -I flag. This option also uses #serial
915 lines in M4 files to upgrade local macros.
917 The new aclocal options --dry-run and --diff help to review changes
918 before they are installed.
920 - aclocal now outputs an autoconf version check in aclocal.m4 in
921 projects using automake.
923 For a few years, automake and aclocal have been calling autoconf
924 (or its underlying engine autom4te) to accurately retrieve the
925 data they need from configure.ac and its siblings. Doing so can
926 only work if all autotools use the same version of autoconf. For
927 instance a Makefile.in generated by automake for one version of
928 autoconf may stop working if configure is regenerated with another
929 version of autoconf, and vice versa.
931 This new version check ensures that the whole build system has
932 been generated using the same autoconf version.
934 * Support for new Autoconf macros:
936 - The new AC_REQUIRE_AUX_FILE Autoconf macro is supported.
938 - If `subdir-objects' is set, and AC_CONFIG_LIBOBJ_DIR is specified,
939 $(LIBOBJS), $(LTLIBOBJS), $(ALLOCA), and $(LTALLOCA) can be used
940 in different directories. However, only one instance of such a
941 library objects directory is supported.
943 * Change to Libtool support:
945 - Libtool generic flags (those that go before the --mode=MODE option)
946 can be specified using AM_LIBTOOLFLAGS and target_LIBTOOLFLAGS.
948 * Yacc and Lex changes:
950 - The rebuild rules for distributed Yacc and Lex output will avoid
951 overwriting existing files if AM_MAINTAINER_MODE and maintainer-mode
954 - ylwrap is now always used for lex and yacc source files,
955 regardless of whether there is more than one source per directory.
959 - Preprocessed assembler (*.S) compilation now honors CPPFLAGS,
960 AM_CPPFLAGS and per-target _CPPFLAGS, and supports dependency
961 tracking, unlike non-preprocessed assembler (*.s).
963 - subdir-object mode works now with Assembler. Automake assumes
964 that the compiler understands `-c -o'.
966 - Preprocessed assembler (*.S) compilation now also honors
967 $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES).
969 - Improved support for Objective C:
970 - Autoconf's new AC_PROG_OBJC will enable automatic dependency tracking.
971 - A new section of the manual documents the support.
973 - New support for Unified Parallel C:
974 - AM_PROG_UPC looks for a UPC compiler.
975 - A new section of the manual documents the support.
977 - Per-target flags are now correctly handled in link rules.
979 For instance maude_CFLAGS correctly overrides AM_CFLAGS; likewise
980 for maude_LDFLAGS and AM_LDFLAGS. Previous versions bogusly
981 preferred AM_CFLAGS over maude_CFLAGS while linking, and they
982 used both AM_LDFLAGS and maude_LDFLAGS on the same link command.
984 The fix for compiler flags (i.e., using maude_CFLAGS instead of
985 AM_CFLAGS) should not hurt any package since that is how _CFLAGS
986 is expected to work (and actually works during compilation).
988 However using maude_LDFLAGS "instead of" AM_LDFLAGS rather than
989 "in addition to" breaks backward compatibility with older versions.
990 If your package used both variables, as in
992 AM_LDFLAGS = common flags
994 a_LDFLAGS = more flags
997 and assumed *_LDFLAGS would sum up, you should rewrite it as
999 AM_LDFLAGS = common flags
1000 bin_PROGRAMS = a b c
1001 a_LDFLAGS = $(AM_LDFLAGS) more flags
1004 This new behavior of *_LDFLAGS is more coherent with other
1005 per-target variables, and the way *_LDFLAGS variables were
1006 considered internally.
1008 * New installation targets:
1010 - New targets mandated by GNU Coding Standards:
1015 By default they will only install Texinfo manuals.
1016 You can customize them with *-local variants:
1022 - The undocumented recursive target `uninstall-info' no longer exists.
1023 (`uninstall' is in charge of removing all possible documentation
1024 flavors, including optional formats such as dvi, ps, or info even
1025 when `no-installinfo' is used.)
1027 * Miscellaneous changes:
1029 - Automake no longer complains if input files for AC_CONFIG_FILES
1030 are specified using shell variables.
1032 - clean, distribution, or rebuild rules are normally disabled for
1033 inputs and outputs of AC_CONFIG_FILES, AC_CONFIG_HEADERS, and
1034 AC_CONFIG_LINK specified using shell variables. However, if these
1035 variables are used as ${VAR}, and AC_SUBSTed, then Automake will
1036 be able to output rules anyway.
1037 (See the Automake documentation for AC_CONFIG_FILES.)
1039 - $(EXEEXT) is automatically appended to filenames of TESTS
1040 that have been declared as programs in the same Makefile.
1041 This is mostly useful when some check_PROGRAMS are listed in TESTS.
1043 - `-Wportability' has finally been turned on by default for `gnu' and
1044 `gnits' strictness. This means, automake will complain about %-rules
1045 or $(GNU Make functions) unless you switch to `foreign' strictness or
1046 use `-Wno-portability'.
1048 - Automake now uses AC_PROG_MKDIR_P (new in Autoconf 2.60), and uses
1049 $(MKDIR_P) instead of $(mkdir_p) to create directories. The
1050 $(mkdir_p) variable is still defined (to the same value as
1051 $(MKDIR_P)) but should be considered obsolete. If you are using
1052 $(mkdir_p) in some of your rules, please plan to update them to
1053 $(MKDIR_P) at some point.
1055 - AM_C_PROTOTYPES and ansi2knr are now documented as being obsolete.
1056 They still work in this release, but may be withdrawn in a future one.
1058 - Inline compilation rules for gcc3-style dependency tracking are
1061 - Automake installs a "Hello World!" example package in $(docdir).
1062 This example is used throughout the new "Autotools Introduction"
1063 chapter of the manual.
1065 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1069 * Makefile.in bloat reduction:
1071 - Inference rules are used to compile sources in subdirectories when
1072 the `subdir-objects' option is used and no per-target flags are
1073 used. This should reduce the size of some projects a lot, because
1074 Automake used to output an explicit rule for each such object in
1077 - Automake no longer outputs three rules (.o, .obj, .lo) for each
1078 object that must be built with explicit rules. It just outputs
1079 the rules required to build the kind of object considered: either
1080 the two .o and .obj rules for usual objects, or the .lo rule for
1083 * Change to Libtool support:
1085 - Libtool tags are used with libtool versions that support them.
1086 (I.e., with Libtool 1.5 or greater.)
1088 - Automake is now able to handle setups where a libtool library is
1089 conditionally installed in different directories, as in
1092 lib_LTLIBRARIES = liba.la
1094 pkglib_LTLIBRARIES = liba.la
1096 liba_la_SOURCES = ...
1098 * Changes to aclocal:
1100 - aclocal now ensures that AC_DEFUNs and AU_DEFUNs it discovers are
1101 really evaluated, before it decides to include them in aclocal.m4.
1102 This solves nasty problems with conditional redefinitions of
1103 Autoconf macros in /usr/share/aclocal/*.m4 files causing extraneous
1104 *.m4 files to be included in any project using these macros.
1105 (Calls to AC_PROG_EGREP causing libtool.m4 to be included is the
1106 most famous instance of this bug.)
1108 - Do not complain about missing conditionally AC_REQUIREd macros
1109 that are not actually used. In 1.8.x aclocal would correctly
1110 determine which of these macros were really needed (and include
1111 only these in the package); unfortunately it would also require
1112 all of them to be present in order to run. This created
1113 situations were aclocal would not work on a tarball distributing
1114 all the macros it uses. For instance running aclocal on a project
1115 containing only the subset of the Gettext macros in use by the
1116 project did not work, because gettext conditionally requires other
1119 * Portability improvements:
1121 - Tar format can be chosen with the new options tar-v7, tar-ustar, and
1122 tar-pax. The new option filename-length-max=99 helps diagnosing
1123 filenames that are too long for tar-v7. (PR/414)
1125 - Variables aumented with `+=' are now automatically flattened (i.e.,
1126 trailing backslashes removed) and then wrapped around 80 colummns
1127 (adding trailing backslashes). In previous versions, a long series
1133 would result in a single-line definition of VAR that could possibly
1134 exceed the maximum line length of some make implementations.
1136 Non-augmented variables are still output as they are defined in
1141 - Support Fortran 90/95 with the new "fc" and "ppfc" languages.
1142 Works the same as the old Fortran 77 implementation; just replace
1143 F77 with FC everywhere (exception: FFLAGS becomes FCFLAGS).
1144 Requires a version of autoconf which provides AC_PROG_FC (>=2.59).
1146 - Support for conditional _LISP.
1148 - Support for conditional -hook and -local rules (PR/428).
1150 - Diagnose AC_CONFIG_AUX_DIR calls following AM_INIT_AUTOMAKE. (PR/49)
1152 - Automake will not write any Makefile.ins after the first error it
1153 encounters. The previous Makefile.ins (if any) will be left in
1154 place. (Warnings will not prevent output, but remember they can
1155 be turned into errors with -Werror.)
1157 - The restriction that SUBDIRS must contain direct children is gone.
1160 - The manual tells more about SUBDIRS vs. DIST_SUBDIRS.
1161 It also gives an example of nested packages using AC_CONFIG_SUBDIRS.
1163 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1165 Bugs fixed in 1.8.5:
1167 * Long-standing bugs:
1169 - Define DIST_SUBDIRS even when the `no-dist' or `cygnus' options are used
1170 so that `make distclean' and `make maintainer-clean' can work.
1172 - Define AR and ARFLAGS even when only EXTRA_LIBRARIES are defined.
1174 - Fix many rules to please FreeBSD make, which runs commands with `sh -e'.
1176 - Polish diagnostic when no input file is found.
1178 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1180 Bugs fixed in 1.8.4:
1182 * Long-standing bugs:
1184 - Fix AM_PATH_PYTHON to correctly display $PYTHON when it has been
1185 overridden by the user.
1187 - Honor PATH_SEPARATOR in various places of the Automake package, for
1190 - Adjust dependency tracking mode detection to ICC 8.0's new output.
1193 - Fix install-sh so it can install the `mv' binary... using `mv'.
1195 - Fix tru64 dependency tracking for libtool objects.
1197 - Work around Exuberant Ctags when creating a TAGS files in a directory
1198 without files to scan but with subdirectories to include.
1200 * Bugs introduced by 1.8:
1202 - Fix an "internal error" when @LIBOBJS@ is used in a variable that is
1203 not defined in the same conditions as the _LDADD that uses it.
1205 - Do not warn when JAVAROOT is overridden, this is legitimate.
1207 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1209 Bugs fixed in 1.8.3:
1211 * Long-standing bugs:
1213 - Quote filenames in installation rules, in case $DESTDIR, $prefix,
1214 or any of the other *dir variables contain a space.
1216 Please note that Automake does not and cannot support spaces in
1217 filenames that are involved during the build. This change affects
1218 only installation paths, so that `make install' does not bomb out
1219 in packages configured with
1220 ./configure --prefix '/c/Program Files'
1222 - Fix the depfiles output so it works with GNU sed (<4.1) even when
1223 POSIXLY_CORRECT is set.
1225 - Do not AC_SUBST(LIBOBJS) in AM_WITH_REGEX. This macro was unusable
1226 since Autoconf 2.54, which defines LIBOBJS itself.
1228 - Fix a potential (but unlikely) race condition in parallel elisp
1229 builds. (Introduced in 1.7.3.)
1231 - Do not assume that users override _DEPENDENCIES in all conditions
1232 where Automake will try to define them.
1234 - Do not use `mkdir -p' in mkinstalldirs, unless this is GNU mkdir.
1235 Solaris 8's `mkdir -p' is not thread-safe and can break parallel
1238 This fix also affects the $(mkdir_p) variable defined since
1239 Automake 1.8. It will be set to `mkdir -p' only if mkdir is GNU
1240 mkdir, and to `mkinstalldirs' or `install-sh -d' otherwise.
1242 - Secure temporary directory creation in `make distcheck'. (PR/413)
1244 - Do not generate two build rules for `parser.h' when the
1245 parser appears in two different conditionals.
1247 - Work around a Solaris 8 /bin/sh bug in the test for dependency
1248 checking. Usually ./configure will not pick this shell; so this
1249 fix only helps cases where the shell is forced to /bin/sh.
1251 * Bugs introduced by 1.8:
1253 - In some situations (hand-written `m4_include's), aclocal would
1254 call the `File::Spec->rel2abs' method, which was only introduced
1255 in Perl 5.6. This new version reestablish support Perl 5.005.
1257 It is likely that the next major Automake releases will require at
1258 least Perl 5.6. Consider upgrading your development environment
1259 if you are still using the five-year-old Perl 5.005.
1261 - Automake would sometimes fail to define rules for targets listed
1262 in variables defined in multiple conditions. For instance on
1268 it would define only the `a.$(OBJEXT): a.c' rule and omit the
1269 `b.$(OBJEXT): b.c' rule.
1271 * New sections in manual:
1273 - Third-Party Makefiles: how to interface third party Makefiles.
1274 - Upgrading: upgrading packages to newer Automake versions.
1275 - Multiple Outputs: handling tools that produce many outputs.
1277 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1281 * A (well known) portability bug slipped in the changes made to
1282 install-sh in Automake 1.8.1. The broken install-sh would refuse to
1283 install anything on Tru64.
1285 * Fix install rules for conditionally built python files. (This never
1288 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1292 * Bugs introduced by 1.8:
1294 - Fix Config.pm import error with old Perl versions (at least
1295 5.005_03). One symptom is that aclocal could not find its macro
1298 - Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
1299 created by `make install' are always world readable, even if the
1300 installer happens to have an overly restrictive umask (e.g. 077).
1301 This was a mistake and has been reverted. There are at least two
1302 reasons why we must not use `-m 0755':
1303 - it causes special bits like SGID to be ignored,
1304 - it may be too restrictive (some setups expect 775 directories).
1306 - Fix aclocal to honor definitions located in files which have been
1307 m4_included manually. aclocal 1.8 had been updated to check
1308 m4_included files for new requirements, but forgot that these
1309 m4_included files can also provide new definitions.
1311 Note that if you have such a setup, we recommend you get rid of
1312 it. In the past, there was a reason to m4_include files manually:
1313 aclocal used to duplicate entire M4 files into aclocal.m4, even
1314 files that were distributed. Some packages were therefore
1315 m4_including the distributed file directly, and playing some
1316 tricks to ensure aclocal would not copy that file to aclocal.m4,
1317 in order to limit the amount of duplication. Since aclocal 1.8.x
1318 will precisely output m4_includes for local M4 files, we recommend
1319 that you clean up your setup, removing all manual m4_includes and
1320 letting aclocal output them.
1322 - Output detailed menus in the Info version if the Automake manual,
1323 so that Emacs can locate the indexes.
1325 - configure.ac and configure were listed twice in DIST_COMMON (an
1326 internal variable where Automake lists configury files to
1327 distribute). This was harmless, but unaesthetic.
1329 - Use `chmod a-w' instead of `chmod -w' as the latter honors umask.
1330 This was an issue only in the Automake package itself, not in
1333 - Automake assumed that all AC_CONFIG_LINKS arguments had the form
1334 DEST:SRC. This was wrong, as some packages do
1335 AC_CONFIG_LINKS($computedlinks). This version no longer abort in
1338 - Contrary to mkinstalldirs, $(mkdir_p) was expecting exactly one
1339 argument. This caused two kinds of failures:
1340 - Rules installing data in a conditionally defined directory
1341 failed when that directory was undefined. In this case no
1342 argument was supplied.
1343 - `make installdirs' failed, because several directories were
1344 passed to $(mkdir_p). This was an issue only on platform
1345 were $(mkdir_p) is implemented with `install-sh -d'.
1346 $(mkdir_p) as been changed to accept 0 or more arguments, as
1349 * Long-standing bugs:
1351 - Fix an unexpected diagnostic occurring when users attempt
1352 to override some internal variables that Automake appends to.
1354 - aclocal now scans configure.ac for macro definitions (PR/319).
1356 - Fix a portability issue with OSF1/Tru64 Make. If a directory
1357 distributes files which are outside itself (this usually occurs
1358 when using AC_CONFIG_AUX_DIR([../dir]) to use auxiliary files
1359 from a parent package), then `make distcheck' fails due to an
1360 optimization performed by OSF1/Tru64 Make in its VPATH handling.
1361 (tests/subpkg2.test failure)
1363 - Fix another portability issue with Sun and OSF1/Tru64 Make.
1364 In a VPATH-build configuration, `make install' would install
1365 nobase_ files to wrong locations.
1367 - Fix a Perl `uninitialized value' diagnostic occurring when
1368 automake complains that a Texinfo file does not have a
1369 @setfilename statement.
1371 - Erase config.status.lineno during `make distclean'. This file
1372 can be created by config.status. Automake already knew about
1373 configure.lineno, but forgot config.status.lineno.
1375 - Distribute all files, even those which are built and installed
1376 conditionally. This change affects files listed in conditionally
1377 defined *_HEADERS and *_PYTHON variable (unless they are nodist_*)
1378 as well as those listed in conditionally defined dist_*_DATA,
1379 dist_*_JAVA, dist_*_LISP, and dist_*_SCRIPTS variables.
1381 - Fix AM_PATH_LISPDIR to avoid \? in sed regular expressions; it
1382 doesn't conform to POSIX.
1384 - Normalize help strings for configure variables and options added
1389 - Check for python2.4 in AM_PATH_PYTHON.
1391 * Spurious failures in test suite:
1393 - tests/libtool5.test, tests/ltcond.test, tests/ltcond2.test,
1394 tests/ltconv.test: fix failures with CVS Libtool.
1395 - tests/aclocal6.test: fix failure if autom4te.cache is disabled.
1396 - tests/txinfo24.test, tests/txinfo25.test, tests/txinfo28.test:
1397 fix failures with old Texinfo versions.
1399 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1405 - The NEWS file is more verbose.
1409 - Autoconf 2.58 or greater is required.
1413 - Default source file names in the absence of a _SOURCES declaration
1414 are made by removing any target extension before appending `.c', so
1415 to make the libtool module `foo.la' from `foo.c', you only need to
1418 lib_LTLIBRARIES = foo.la
1419 foo_la_LDFLAGS = -module
1421 For backward compatibility, foo_la.c will be used instead of
1422 foo.c if this file exists or is the explicit target of a rule.
1423 However -Wobsolete will warn about this deprecated naming.
1425 - AR's `cru' flags are now set in a global ARFLAGS variable instead
1426 of being hard-coded in each $(AR) invocation, so they can be
1427 substituted from configure.ac. This has been requested by people
1428 dealing with non-POSIX ar implementations.
1430 - New warning option: -Woverride. This will warn about any user
1431 target or variable definitions which override Automake
1434 - Texinfo rules back up and restore info files when makeinfo fails.
1436 - Texinfo rules now support the `html' target.
1437 Running this requires Texinfo 4.0 or greater.
1439 `html' is a new recursive target, so if your package mixes
1440 hand-crafted `Makefile.in's with Automake-generated
1441 `Makefile.in's, you should adjust the former to support (or
1442 ignore) this target so that `make html' recurses successfully. If
1443 you had a custom `html' rule in your `Makefile.am', it's better to
1444 rename it as `html-local', otherwise your rule will override
1445 Automake's new rule (you can check that by running `automake
1446 -Woverride') and that will stop the recursion to subdirectories.
1448 Last but not least, this `html' rule is declared PHONY, even when
1449 overridden. Fortunately, it appears that few packages use a
1450 non-PHONY `html' rule.
1452 - Any file which is m4_included from configure.ac will appear as a
1453 configure and Makefile.in dependency, and will be automatically
1456 - The rules for rebuilding Makefiles and Makefile.ins will now
1457 rebuild all Makefiles and all Makefile.ins at once when one of
1458 configure's dependencies has changed. This is considerably faster
1459 than previous implementations, where config.status and automake
1460 were run separately in each directory (this still happens when you
1461 change a Makefile.am locally, without touching configure.ac or
1462 friends). Doing this also solves a longstanding issue: these
1463 rebuild rules failed to work when adding new directories to the
1464 tree, forcing you to run automake manually.
1466 - For similar reasons, the rules to rebuild configure,
1467 config.status, and aclocal.m4 are now defined in all directories.
1468 Note that if you were using the CONFIG_STATUS_DEPENDENCIES and
1469 CONFIGURE_DEPENDENCIES (formerly undocumented) variables, you
1470 should better define them in all directories. This is easily done
1471 using an AC_SUBST (make sure you prefix these dependencies with
1472 $(top_srcdir) since this variable will appear at different
1473 levels of the build tree).
1475 - aclocal will now use `m4_include' instead of copying local m4
1476 files into aclocal.m4. (Local m4 files are those you ship with
1477 your project, other files will be copied as usual.)
1479 Because m4_included files are automatically distributed, it means
1480 for most projects there is no point in EXTRA_DISTing the list of
1481 m4 files which are used. (You can probably get rid of
1482 m4/Makefile.am if you had one.)
1484 - aclocal will avoid touching aclocal.m4 when possible, so that
1485 Autom4te's cache isn't needlessly invalidated. This behavior can
1486 be switched off with the new `--force' option.
1488 - aclocal now uses Autoconf's --trace to detect macros which are
1489 actually used and will no longer include unused macros simply
1490 because they where mentioned. This was often the case for macros
1491 called conditionally.
1493 - New options no-dist and no-dist-gzip.
1495 - compile, depcomp, elisp-comp, install-sh, mdate-sh, mkinstalldirs,
1496 py-compile, and ylwrap, now all understand --version and --help.
1498 - Automake will now recognize AC_CONFIG_LINKS so far as removing created
1499 links as part of the distclean target and including source files in
1502 - AM_PATH_PYTHON now supports ACTION-IF-FOUND and ACTION-IF-NOT-FOUND
1503 argument. The latter can be used to override the default behavior
1504 (which is to abort).
1506 - Automake will exit with $? = 63 on version mismatch. (So does
1507 Autoconf 2.58) missing knows this, and in this case it will
1508 emulate the tools as if they were absent. Because older versions
1509 of Automake and Autoconf did not use this exit code, this change
1510 will only be useful in projects generated with future versions of
1513 - When using AC_CONFIG_FILES with multiple input files, Automake
1514 generates the first ".in" input file for which a ".am" exists.
1515 (Former versions would try to use only the first input file.)
1517 - lisp_DATA is now allowed. If you are using the empty ELCFILES
1518 idiom to disable byte-compilation of lisp_LISP files, it is
1519 recommended that you switch to using lisp_DATA. Note that
1520 this is not strictly equivalent: lisp_DATA will install elisp
1521 files even if emacs is not installed, while *_LISP do not
1522 install anything unless emacs is found.
1524 - Makefiles will prefer `mkdir -p' over mkinstalldirs if it is
1525 available. This selection is achieved through the Makefile
1526 variable $(mkdir_p) that is set by AM_INIT_AUTOMAKE to either
1527 `mkdir -m 0755 -p --', `$(mkinstalldirs) -m 0755', or
1528 `$(install_sh) -m 0755 -d'.
1532 - Because `mkdir -p' is available on most platforms, and we can use
1533 `install-sh -d' when it is not, the use of the mkinstalldirs
1534 script is being phased out. `automake --add-missing' no longer
1535 installs it, and if you remove mkinstalldirs from your package,
1536 automake will define $(mkinstalldirs) as an alias for $(mkdir_p).
1538 Gettext 0.12.1 still requires mkinstalldirs. Fortunately
1539 gettextize and autopoint will install it when needed. Automake
1540 will continue to define the $(mkinstalldirs) and to distribute
1541 mkinstalldirs when this script is in the source tree.
1543 - AM_PROG_CC_STDC is now empty. The content of this macro was
1544 merged in AC_PROG_CC. If your code uses $am_cv_prog_cc_stdc, you
1545 should adjust it to use $ac_cv_prog_cc_stdc instead. (This
1546 renaming should be safe, even if you have to support several,
1547 versions of Automake, because AC_PROG_CC defines this variable
1548 since Autoconf 2.54.)
1550 - Some users where using the undocumented ACLOCAL_M4_SOURCES
1551 variable to override the aclocal.m4 dependencies computed
1552 (inaccurately) by older versions of Automake. Because Automake
1553 now tracks configure's m4 dependencies accurately (see m4_include
1554 above), the use of ACLOCAL_M4_SOURCES should be considered
1555 obsolete and will be flagged as such when running `automake
1560 - Defining programs conditionally using Automake conditionals no
1561 longer leads to a combinatorial explosion. The following
1562 construct used to be troublesome when used with dozens of
1577 Likewise for _SOURCES, _LDADD, and _LIBADD variables.
1579 - Due to implementation constraints, previous versions of Automake
1580 proscribed multiple conditional definitions of some variables
1590 All _PROGRAMS, _LDADD, and _LIBADD variables were affected.
1591 This restriction has been lifted, and these variables now
1592 support multiple conditional definitions as do other variables.
1594 - Cleanup the definitions of $(distdir) and $(top_distdir).
1595 $(top_distdir) now points to the root of the distribution
1596 directory created during `make dist', as it did in Automake 1.4,
1597 not to the root of the build tree as it did in intervening
1598 versions. Furthermore these two variables are now only defined in
1599 the top level Makefile, and passed to sub-directories when running
1602 - The --no-force option now correctly checks the Makefile.in's
1603 dependencies before deciding not to update it.
1605 - Do not assume that make files are called Makefile in cleaning rules.
1607 - Update .info files in the source tree, not in the build tree. This
1608 is what the GNU Coding Standard recommend. Only Automake 1.7.x
1609 used to update these files in the build tree (previous versions did
1610 it in the source tree too), and it caused several problems, varying
1611 from mere annoyance to portability issues.
1613 - COPYING, COPYING.LIB, and COPYING.LESSER are no longer overwritten
1614 when --add-missing and --force-missing are used. For backward
1615 compatibility --add-missing will continue to install COPYING (in
1616 `gnu' strictness) when none of these three files exist, but this
1617 use is deprecated: you should better choose a license yourself and
1618 install it once for all in your source tree (and in your code
1621 - Fix ylwrap so that it does not overwrite header files that haven't
1622 changed, as the inline rule already does.
1624 - User-defined rules override automake-defined rules for the same
1625 targets, even when rules do not have commands. This is not new
1626 (and was documented), however some of the automake-generated
1627 rules have escaped this principle in former Automake versions.
1628 Rules for the following targets are affected by this fix:
1630 clean, clean-am, dist-all, distclean, distclean-am, dvi, dvi-am,
1631 info, info-am, install-data-am, install-exec-am, install-info,
1632 install-info-am, install-man, installcheck-am, maintainer-clean,
1633 maintainer-clean-am, mostlyclean, mostlyclean-am, pdf, pdf-am,
1634 ps, ps-am, uninstall-am, uninstall-info, uninstall-man
1636 Practically it means that an attempt to supplement the dependencies
1637 of some target, as in
1639 clean: my-clean-rule
1641 will now *silently override* the automake definition of the
1642 rule for this target. Running `automake -Woverride' will diagnose
1643 all such overriding definitions.
1645 It should be noted that almost all of these targets support a *-local
1646 variant that is meant to supplement the automake-defined rule
1647 (See node `Extending' in the manual). The above rule should
1650 clean-local: my-clean-rule
1652 These *-local targets have been documented since at least
1653 Automake 1.2, so you should not fear the change if you have
1654 to support multiple automake versions.
1658 - The Automake manual is now distributed under the terms of the GNU FDL.
1660 - Targets dist-gzip, dist-bzip2, dist-tarZ, dist-zip are always defined.
1662 - core dumps are no longer removed by the cleaning rules. There are
1663 at least three reasons for this:
1664 1. These files should not be created by any build step,
1665 so their removal do not fit any of the cleaning rules.
1666 Actually, they may be precious to the developer.
1667 2. If such file is created during a build, then it's clearly a
1668 bug Automake should not hide. Not removing the file will
1669 cause `make distcheck' to complain about its presence.
1670 3. Operating systems have different naming conventions for
1671 core dump files. A core file on one system might be a
1672 completely legitimate data file on another system.
1674 - RUNTESTFLAGS, CTAGSFLAGS, ETAGSFLAGS, JAVACFLAGS are no longer
1675 defined by Automake. This means that any definition in the
1676 environment will be used, unless overridden in the Makefile.am or
1677 on the command line. The old behavior, where these variables were
1678 defined empty in each Makefile, can be obtained by AC_SUBSTing or
1679 AC_ARG_VARing each variable from configure.ac.
1681 - CONFIGURE_DEPENDENCIES and CONFIG_STATUS_DEPENDENCIES are now
1682 documented. (The is not a new feature, these variables have
1683 been there since at least Automake 1.4.)
1685 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1687 Bugs fixed in 1.7.9:
1688 * Fix install-strip to work with nobase_ binaries.
1689 * Fix renaming of #line directives in ylwrap.
1690 * Rebuild with Autoconf 2.59. (1.7.8 was not installable with pdksh.)
1692 Bugs fixed in 1.7.8:
1693 * Remove spurious blank lines in cleaning rules introduced in 1.7.7.
1694 * Fix detection of Debian's install-info, broken since version 1.5.
1695 (Debian bug #213524).
1696 * Honor -module if it appears in AM_LDFLAGS (i.e., relax name checking)
1697 This was only done for libfoo_LDFLAGS and LDFLAGS in previous versions.
1699 Bugs fixed in 1.7.7:
1700 * The implementation of automake's --no-force option is unreliable,
1701 so this option is ignored in this version. A real fix will appear in
1702 Automake 1.8. (Debian Bug #206299)
1703 * AM_PATH_PYTHON: really check the whole list of interpreters if no
1704 argument is given. (PR/399)
1705 * Do not warn about leading `_' in variable names, even with -Wportability.
1706 * Support user redefinitions of TEXINFO_TEX.
1707 * depcomp: support AIX Compiler version 6.
1708 * Fix missing rebuilds during `make dist' with BSD make.
1709 (Could produce tarballs containing out-of-date files.)
1710 * Resurrect multilib support.
1711 * Noteworthy manual updates:
1712 - Extending aclocal: how to write m4 macros that won't trigger warnings
1714 - A Shared Library: Rewrite and split into subsections.
1716 Bugs fixed in 1.7.6:
1717 * Fix depcomp's icc mode for ICC 7.1.
1718 * Diagnose calls to AC_CONFIG_FILES and friends with not enough arguments.
1719 * Fix maintainer-clean's removal of autom4te.cache in VPATH builds.
1720 * Fix AM_PATH_LISPDIR to work with POSIXLY_CORRECT=1.
1721 * Fix the location reported in some diagnostics related to AUTOMAKE_OPTIONS.
1722 * Remove Latin-1 characters from elisp-comp.
1723 * Update the manual's @dircategory to match the Free Software Directory.
1725 Bugs fixed in 1.7.5:
1726 * Update install-sh's license to remove an advertising clause.
1727 (Debian bug #191717)
1728 * Fix a bug introduced in 1.7.4, related to BUILT_SOURCE handling,
1729 that caused invalid Makefile.ins to be generated.
1730 * Make sure AM_MAKE_INCLUDE doesn't fail when a `doit' file exists.
1731 * New FAQ entry: renamed objects.
1733 Bugs fixed in 1.7.4:
1734 * Tweak the TAGS rule to support Exuberant Ctags (in addition to
1735 the Emacs implementation)
1736 * Fix output of aclocal.m4 dependencies in subdirectories.
1737 * Use `mv -f' instead of `mv' in fastdep rules.
1738 * Upgrade mdate-sh to work on OS/2.
1739 * Don't byte-compile elisp files when ELCFILES is set empty.
1740 (this documented feature was broken by 1.7.3)
1741 * Diagnose trailing backslashes on last line of Makefile.am.
1742 * Diagnose whitespace following trailing backslashes.
1743 * Multiple tests are now correctly supported in DEJATOOL. (PR/388)
1744 * Fix rebuilt rules for AC_CONFIG_FILES([Makefile:Makefile.in:Makefile.bot])
1746 * `make install' will build `BUILT_SOURCES' first.
1747 * Minor documentation fixes.
1749 Bugs fixed in 1.7.3:
1750 * Fix stamp files numbering (when using multiple AC_CONFIG_HEADERS).
1751 * Query distutils for `pythondir' and `pythonexecdir', instead of
1752 using an hardcoded path. This should allow builds on 64-bit
1753 distributions that usually use lib64/ instead of lib/.
1754 * AM_PATH_PYTHON will also search for python2.3.
1755 * elisp files are now built all at once instead of one by one. Besides
1756 incurring a speed-up, this is required to support interdependent elisp files.
1757 * Support for DJGPP:
1758 - `make distcheck' will now work in `_inst/' and `_build' instead
1759 of `=inst/' and `=build/'
1760 - use `_dirstamp' when the file-system doesn't support `.dirstamp'
1761 - install/uninstall `*.i[0-9][0-9]'-style info files
1762 - more changes that affect only the Automake package (not its output)
1763 * Fix some incompatibilities with upcoming perl-5.10.
1764 * Properly quote AC_PACKAGE_TARNAME and AC_PACKAGE_VERSION when defining
1765 PACKAGE and VERSION.
1767 - dashmstdout and dashXmstdout modes: don't use `-o /dev/null', this
1768 is troublesome with gcc and Solaris compilers. (PR/385)
1769 - makedepend mode: work with Libtool. (PR/385 too)
1771 * better support for unusual gettext setups, such as multiple po/ directories
1773 - Flag missing po/ and intl/ directories as warnings, not errors.
1774 - Disable these warnings if po/ does not exist.
1775 * Noteworthy manual updates:
1777 - Document how AC_CONFIG_AUX_DIR interacts with missing files.
1779 - Document `AM_YFLAGS = -d'. (PR/382)
1781 Bugs fixed in 1.7.2:
1782 * Fix installation and uninstallation of Info files built in subdirectories.
1783 * Do not run `./configure --with-included-gettext' during `make distcheck'
1784 if AM_GNU_GETTEXT([external]) is used.
1785 * Correctly uninstall renamed man pages.
1786 * Do not strip escaped newline in variables defined in one condition
1787 and augmented in another condition.
1788 * Fix ansi2knr rules for LIBOBJS sources.
1789 * Clean all known Texinfo index files, not only those which appear to
1790 be used, because we cannot know which indexes are used in included files.
1791 (PR/375, Debian Bug #168671)
1792 * Honor only the first @setfilename seen in a Texinfo file.
1793 * Treat "required file X not found" diagnostics as errors (exit status 1).
1794 * Don't complain that a required file is not found when it is a Makefile
1796 * Don't use single suffix inference rules when building `.info'-less
1797 Info files, for the sake of Solaris make.
1798 * The `check' target now depends on `$(BUILT_SOURCES)'. (PR/359)
1799 * Recognize multiple inference rules such as `.a.b .c.d:'. (PR/371)
1800 * Warn about multiple inference rules when -Wportability is used. (PR/372)
1801 * Fix building of deansified files from subdirectories. (PR/370)
1802 * Add missing `fi' in the .c->.obj rules.
1803 * Improve install-sh to work even when names contain spaces or certain
1804 (but not all) shell metachars.
1805 * Fix the following spurious failures in the test suite:
1806 depcomp2.test, gnits2.test, gnits3.test, python3.test, texinfo13.test
1807 * Noteworthy manual updates:
1808 - Augment the section about BUILT_SOURCES.
1809 - Mention that AM_PROG_CC_STDC is a relic that is better avoided today.
1811 Bugs fixed in 1.7.1:
1812 * Honor `ansi2knr' for files built in subdirectories, or using per-targets
1814 * Aclocal should now recognize macro names containing parentheses, e.g.
1815 AC_DEFUN([AC_LANG_PREPROC(Fortran 90)], [...]).
1816 * Erase *.sum and *.log files created by DejaGnu, during `make distclean'.
1818 * Install Python files even if they were built. (PR/369)
1819 * Have stamp-vti dependent upon configure instead of configure.ac, as the
1820 version might not be defined in the latter. (PR/358)
1821 * Reorder arguments passed to a couple of commands, so things works
1822 when POSIXLY_CORRECT=1.
1823 * Fix a regex that can cause Perl to segfault on large input.
1825 * Fix distribution of packages that have some sources defined conditionally,
1826 as in the `Conditional compilation using Automake conditionals' example
1828 * Fix spurious test suite failures on IRIX.
1829 * Don't report a required variable as undefined if it has been
1830 defined conditionally for the "right" conditions.
1831 * Fix cleaning of the /tmp subdirectory used by `make distcheck', in case
1832 `make distcheck' fails.
1833 * Fix distribution of included Makefile fragment, so we don't create
1834 spurious directories in the distribution. (PR/366)
1835 * Don't complain that a target lacks `.$(EXEEXT)' when it has it.
1838 * Autoconf 2.54 is required.
1839 * `aclocal' and `automake' will no longer warn about obsolete
1840 configure macros. This is done by `autoconf -Wobsolete'.
1841 * AM_CONFIG_HEADER, AM_SYS_POSIX_TERMIOS and
1842 AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL are obsolete (although still
1843 supported). You should use AC_CONFIG_HEADERS, AC_SYS_POSIX_TERMIOS,
1844 and AC_HEADER_TIOCGWINSZ instead. `autoupdate' can upgrade
1845 `configure.ac' for you.
1846 * Support for per-program and per-library `_CPPFLAGS'.
1847 * New `ctags' target (builds CTAGS files).
1848 * Support for -Wmumble and -Wno-mumble, where mumble is a warning category
1849 (see `automake --help' or the manual for a list of them).
1850 * Honor the WARNINGS environment variable.
1851 * Omit the call to depcomp when using gcc3: call the compiler directly.
1852 * A new option, std-options, tests that programs support --help and --version
1853 when `make installcheck' is run. This is enabled by --gnits.
1854 * Texinfo rules now support the `ps' and `pdf' targets.
1855 * Info files are now created in the build directory, not the source directory.
1856 * info_TEXINFOS supports files in subdirectories (this requires Texinfo 4.1
1858 * `make distcheck' will enforce DESTDIR support by attempting
1860 * `+=' can be used in conditionals, even if the augmented variable
1861 was defined for another condition.
1862 * Makefile fragments (inserted with `include') are always distributed.
1863 * Use Autoconf's --trace interface to inspect configure.ac and get
1864 a more accurate view of it.
1865 * Add support for extending aclocal's default macro search path
1866 using a `dirlist' file within the aclocal directory.
1867 * automake --output-dir is deprecated.
1868 * The part of the distcheck target that checks whether uninstall actually
1869 removes all installed files has been moved in a separate target,
1870 distuninstallcheck, so it can be overridden easily.
1874 * Support for AM_INIT_GETTEXT([external])
1875 * Bug fixes, including:
1876 - Fix Automake's own `make install' so it works even if `ln' doesn't.
1877 - nobase_ programs and scripts honor --program-transform correctly.
1878 - Erase configure.lineno during `make distclean'.
1879 - Erase YACC and LEX outputs during `make maintainer-clean'.
1882 * Many bug fixes, including:
1883 - Requiring the current version works.
1884 - Fix "$@" portability issues (for Zsh).
1885 - Fix output of dummy dependency files in presence of post-processed
1887 - Don't compute dependencies in background to avoid races with libtool.
1888 - Fix handling of _OBJECTS variables for targets sharing source variables.
1889 - Check dependency mode for Java when AM_PROG_GCJ is used.
1892 * automake --output-dir is deprecated
1893 * Many bug fixes, including:
1894 - Don't choke on AM_LDFLAGS definitions.
1895 - Clean libtool objects from subdirectories.
1896 - Allow configure variables with reserved suffix and unknown prefix
1897 (e.g. AC_SUBST(mumble_LDFLAGS) when 'mumble' is not a target).
1898 - Fix the definition of AUTOMAKE and ACLOCAL in configure.
1901 * Autoconf 2.52 is required.
1902 * automake no longer run libtoolize.
1903 This is the job of autoreconf (from GNU Autoconf).
1904 * `dist' generates all the archive flavors, as did `dist-all'.
1905 * `dist-gzip' generates the Gzip tar file only.
1906 * Combining Automake Makefile conditionals no longer lead to a combinatorial
1907 explosion. Makefile.in's keep a reasonable size.
1908 * AM_FUNC_ERROR_AT_LINE, AM_FUNC_STRTOD, AM_FUNC_OBSTACK, AM_PTRDIFF_T
1909 are no longer shipped, since Autoconf 2.52 provides them (both as AM_
1911 * `#line' of Lex and Yacc files are properly set.
1912 * EXTRA_DIST can contain generated directories.
1913 * Support for dot-less extensions in suffix rules.
1914 * The part of the distcheck target that checks whether distclean actually
1915 cleans all built files has been moved in a separate target, distcleancheck,
1916 so it can be overridden easily.
1917 * `make distcheck' will pass additional options defined in
1918 $(DISTCHECK_CONFIGURE_FLAGS) to configure.
1919 * Fixed CDPATH portability problems, in particular for MacOS X.
1920 * Fixed handling of nobase_ targets.
1921 * Fixed support of implicit rules leading to .lo objects.
1922 * Fixed late inclusion of --add-missing files (e.g. depcomp) in DIST_COMMON
1923 * Added uninstall-hook target
1924 * `AC_INIT AM_INIT_AUTOMAKE(tarname,version)' is an obsolete construct.
1925 You can now use `AC_INIT(pkgname,version) AM_INIT_AUTOMAKE' instead.
1926 (Note that "pkgname" is not "tarname", see the manual for details.)
1927 It is also possible to pass a list of global Automake options as
1928 first argument to this new form of AM_INIT_AUTOMAKE.
1929 * Compiler-based assembler is now called `CCAS'; people expected `AS'
1930 to be a real assembler.
1931 * AM_INIT_AUTOMAKE will set STRIP itself when it needs it. Adding
1932 AC_CHECK_TOOL([STRIP], [strip]) manually is no longer required.
1933 * aclocal and automake are also installed with the version number
1934 appended, and some of the install directory names have changed.
1935 This lets you have multiple versions installed simultaneously.
1936 * Support for parsers and lexers in subdirectories.
1939 * Support for `configure.ac'.
1940 * Support for `else COND', `endif COND' and negated conditions `!COND'.
1941 * `make dist-all' is much faster.
1942 * Allows '@' AC_SUBSTs in macro names.
1943 * Faster AM_INIT_AUTOMAKE (requires update of `missing' script)
1944 * User-side dependency tracking. Developers no longer need GNU make
1946 * Uses DIST_SUBDIRS in some situations when SUBDIRS is conditional
1947 * Most files are correctly handled if they appear in subdirs
1948 For instance, a _DATA file can appear in a subdir
1949 * GNU tar is no longer required for `make dist'
1950 * Added support for `dist_' and `nodist_' prefixes
1951 * Added support for `nobase_' prefix
1952 * Compiled Java support
1953 * Support for per-executable and per-library compilation flags
1957 * Added support for the Fortran 77 programming language.
1958 * Re-indexed the Automake Texinfo manual.
1959 * Added `AM_FOOFLAGS' variable for each compiler invocation;
1960 e.g. AM_CFLAGS can be used in Makefile.am to set C compiler flags
1961 * Support for latest autoconf, including support for objext
1962 * Can now put `.' in SUBDIRS to control build order
1963 * `include' command and `+=' support for macro assignment
1964 * Dependency tracking no long susceptible to deleted header file problem
1965 * Maintainer mode now a conditional. @MAINT@ is now an anachronism.
1970 * Better Cygwin32 support
1971 * Support for suffix rules with _SOURCES variables
1972 * New options `readme-alpha' and `check-news'; Gnits mode sets these
1973 * @LEXLIB@ no longer required when lex source seen
1974 Lex support in `missing', and new lex macro. Update your missing script.
1975 * Built-in support for assembly
1976 * aclocal gives error if `AM_' macro not found
1977 * Passed YFLAGS, not YACCFLAGS, to yacc
1978 * AM_PROG_CC_STDC does not have to come before AC_PROG_CPP
1979 * Dependencies computed as a side effect of compilation
1980 * Preliminary support for Java
1981 * DESTDIR support at "make install" time
1982 * Improved ansi2knr support; you must use the latest ansi2knr.c (included)
1986 * Better DejaGnu support
1987 * Added no-installinfo option
1988 * Added Emacs Lisp support
1989 * Added --no-force option
1990 * Included `aclocal' program
1991 * Automake will now generate rules to regenerate aclocal.m4, if appropriate
1992 * Now uses `AM_' macro names everywhere
1993 * ansi2knr option can have directory prefix (eg `../lib/ansi2knr')
1994 ansi2knr now works correctly on K&R sources
1995 * Better C++, yacc, lex support
1996 * Will compute _DEPENDENCIES variables automatically if not supplied
1997 * Will interpolate $(...) and ${...} when examining contents of a variable
1998 * .deps files now in build directory, not source directory; dependency
1999 handling generally rewritten
2000 * DATA, MANS and BUILT_SOURCES no longer included in distribution
2001 * can now put config.h into a subdir
2002 * Added dist-all target
2003 * Support for install-info program (see texinfo 3.9)
2004 * Support for "yacc -d"
2005 * configure substitutions are automatically discovered and included
2006 in generated Makefile.in
2007 * Special --cygnus mode
2008 * OMIT_DEPENDENCIES can now hold list of dependencies to be omitted
2009 when making distribution. Some dependencies are auto-ignored.
2010 * Changed how libraries are specified in _LIBRARIES variable
2011 * Full libtool support, from Gord Matzigkeit
2012 * No longer have to explicitly touch stamp-h when using AC_CONFIG_HEADER;
2013 AM_CONFIG_HEADER handles it automatically
2014 * Texinfo output files no longer need .info extension
2015 * Added `missing' support
2017 * Conditionals in Makefile.am, from Ian Taylor
2021 * distcheck target runs install and installcheck targets
2022 * Added preliminary support for DejaGnu.
2027 * More libtool fixes from Gord Matzigkeit; libtool support is still
2029 * Added support for jm_MAINTAINER_MODE
2031 * New "distcheck" target
2035 * mkinstalldirs and mdate-sh now appear in directory specified by
2037 * Removed DIST_SUBDIRS, DIST_OTHER
2038 * AC_ARG_PROGRAM only required when an actual program exists
2039 * dist-hook target now run before distribution packaged up; idea from
2040 Dieter Baron. Other hooks exist, too.
2041 * Preliminary (unfinished) support for libtool
2042 * Added short option names.
2043 * Better "dist" support when gluing together multiple packages
2047 * Documentation updates (many from François Pinard)
2048 * strictness `normal' now renamed to `foreign'
2049 * Renamed --install-missing to --add-missing
2050 * Now handles AC_CONFIG_AUX_DIR
2051 * Now handles TESTS macro
2052 * DIST_OTHER renamed to EXTRA_DIST
2053 * DIST_SUBDIRS is deprecated
2054 * @ALLOCA@ and @LIBOBJS@ now work in _LDADD variables
2055 * Better error messages in many cases
2056 * Program names are canonicalized
2057 * Added "check" prefix; from Gord Matzigkeit
2061 * configure.in scanner knows about AC_PATH_XTRA, AC_OUTPUT ":" syntax
2062 * Beginnings of a test suite
2063 * Automatically adds -I options for $(srcdir), ".", and path to config.h
2064 * Doesn't print anything when running
2065 * Beginnings of MAINT_CHARSET support
2066 * Can specify version in AUTOMAKE_OPTIONS
2067 * Most errors recognizable by Emacs' M-x next-error
2068 * Added --verbose option
2069 * All "primary" variables now obsolete; use EXTRA_PRIMARY to supply
2070 configure-generated names
2071 * Required macros now distributed in aclocal.m4
2073 * --strictness=gnu is default
2077 * More sophisticated configure.in scanning; now understands ALLOCA and
2078 LIBOBJS directly, handles AC_CONFIG_HEADER more precisely, etc.
2079 * TEXINFOS and MANS now obsolete; use info_TEXINFOS and man_MANS instead.
2080 * CONFIG_HEADER variable now obsolete
2081 * Can handle multiple Texinfo sources
2082 * Allow hierarchies deeper than 2. From Gord Matzigkeit.
2083 * HEADERS variable no longer needed; now can put .h files directly into
2084 foo_SOURCES variable.
2085 * Automake automatically rebuilds files listed in AC_OUTPUT. The
2086 corresponding ".in" files are included in the distribution.
2089 * Added --gnu and --gnits options
2090 * More standards checking
2092 * Cleaned up 'dist' targets
2093 * Added AUTOMAKE_OPTIONS variable and several options
2094 * Now scans configure.in to get some information (preliminary)
2097 * Works with Perl 4 again
2100 * Added --install-missing option.
2101 * Pretty-prints generated macros and rules
2102 * Comments in Makefile.am are placed more intelligently in Makefile.in
2103 * Generates .PHONY target
2104 * Rule or macro in Makefile.am now overrides contents of Automake file
2105 * Substantial cleanups from François Pinard
2109 * Works with Perl 4 again.
2112 * New uniform naming scheme.
2113 * --strictness option
2115 * '.c' files corresponding to '.y' or '.l' files are automatically
2117 * Many bug fixes and cleanups
2120 * Allow objects to be conditionally included in libraries via lib_LIBADD.
2123 * Bug fixes in 'clean' code.
2124 * Now generates 'installdirs' target.
2125 * man page installation reworked.
2126 * 'make dist' no longer re-creates all Makefile.in's.
2129 * Reimplemented in Perl
2130 * Added --amdir option (for debugging)
2131 * Texinfo support cleaned up.
2132 * Automatic de-ANSI-fication cleaned up.
2133 * Cleaned up 'clean' targets.
2136 * Automatic dependency tracking
2137 * More documentation
2138 * New variables DATA and PACKAGEDATA
2139 * SCRIPTS installed using $(INSTALL_SCRIPT)
2140 * No longer uses double-colon rules
2142 * Changes in advance of internationalization
2146 Copyright (C) 1995-2012 Free Software Foundation, Inc.
2148 This program is free software; you can redistribute it and/or modify
2149 it under the terms of the GNU General Public License as published by
2150 the Free Software Foundation; either version 2, or (at your option)
2153 This program is distributed in the hope that it will be useful,
2154 but WITHOUT ANY WARRANTY; without even the implied warranty of
2155 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2156 GNU General Public License for more details.
2158 You should have received a copy of the GNU General Public License
2159 along with this program. If not, see <http://www.gnu.org/licenses/>.