3 * WARNING: Future backward-incompatibilities!
5 - Starting from either the next minor version (1.12.2) or the next major
6 version (1.13), Automake will start warning if 'configure.in' is used
7 instead of 'configure.ac' as the Autoconf input. Future versions of
8 Automake will drop support for 'configure.in' altogether.
10 - Autoconf 2.65 or later will be required by the next major Automake
11 version (1.13). Until now, Automake has required Autoconf version
14 - Starting from the next major Automake version (1.13), the rules to
15 build pdf, ps and dvi output from Texinfo input will use the '--tidy'
16 option by default. Since such an option was introduced in Texinfo
17 4.9, this means that Makefiles generated by future Automake versions
18 will require at least that version of Texinfo.
20 - Starting from the next major Automake version (1.13), the parallel
21 testsuite harness (previously only enabled by the 'parallel-tests'
22 option) will become the default one; the older serial testsuite
23 harness will still be available through the use of the 'serial-tests'
26 - The following long-obsolete m4 macros will be removed in the
27 next major Automake version (1.13):
29 AM_PROG_CC_STDC: superseded by AC_PROG_CC since October 2002
30 fp_PROG_CC_STDC: broken alias for AM_PROG_CC_STDC
31 fp_WITH_DMALLOC: old alias for AM_WITH_DMALLOC
32 AM_CONFIG_HEADER: superseded by AC_CONFIG_HEADERS since July 2002
33 ud_PATH_LISPDIR: old alias for AM_PATH_LISPDIR
34 jm_MAINTAINER_MODE: old alias for AM_MAINTAINER_MODE
35 ud_GNU_GETTEXT: old alias for AM_GNU_GETTEXT
36 gm_PROG_LIBTOOL: old alias for AC_PROG_LIBTOOL
37 fp_C_PROTOTYPES: old alias for AM_C_PROTOTYPES (which was part
38 of the now-removed automatic de-ANSI-fication
41 - All the "old alias" macros in 'm4/obsolete.m4' will be removed in
42 the next major Automake version (1.13).
44 - Support for the two- and three-arguments invocation forms of the
45 AM_INIT_AUTOMAKE macro will be deprecated in the next minor version
46 of Automake (1.12.1) and removed in the next major version (1.13).
48 - The '--acdir' option of aclocal is deprecated, and will probably
49 be removed in the next major Automake release (1.13). You should
50 use the options '--automake-acdir' and '--system-acdir' instead
51 (which have been introduced in Automake 1.11.2).
53 - The exact order in which the directories in the aclocal macro
54 search path are looked up is probably going to be changed in the
55 next Automake release (1.13).
57 * New supported languages:
59 - Support for Objective C++ has been added; it should work similarly to
60 the support for Objective C.
62 * Deprecated obsolescent features:
64 - Use of the long-deprecated two- and three-arguments invocation forms
65 of the AM_INIT_AUTOMAKE macro now elicits a warning in the 'obsolete'
66 category. Starting from the next major Automake release (1.13), such
67 usages won't be allowed anymore.
69 - Support for the "Cygnus-style" trees (enabled by the 'cygnus' option) is
70 now deprecated (its use triggers a warning in the 'obsolete' category).
71 It will be removed in the next major Automake release (1.13).
73 - The long-obsolete (since 1.10) automake-provided $(mkdir_p) make
74 variable, @mkdir_p@ configure-time substitution and AM_PROG_MKDIR
75 m4 macro are deprecated, eliciting a warning in the 'obsolete'
76 category. They will be removed in the next major version (1.13).
78 * Miscellaneous changes:
80 - The Automake test cases now require a proper POSIX-conforming shell.
81 Older non-POSIX Bourne shells (like Solaris 10 /bin/sh) won't be
82 accepted anymore. In most cases, the user shouldn't have to specify
83 such POSIX shell explicitly, since it will be looked up at configure
84 time. Still, when this lookup fails, or when the user wants to
85 override its conclusion, the variable 'AM_TEST_RUNNER_SHELL' can be
86 used (pointing to the shell that will be used to run the Automake
91 * Bugs introduced by 1.12:
93 - Several weaknesses in Automake's own build system and test suite
96 * Bugs introduced by 1.11.3:
98 - When given non-option arguments, aclocal rejects them, instead of
99 silently ignoring them.
101 * Long-standing bugs:
103 - When the 'color-tests' option is in use, forcing of colored testsuite
104 output through "AM_COLOR_TESTS=always" works even if the terminal is
105 a non-ANSI one, i.e., if the TERM environment variable has a value of
108 - Several inefficiencies and poor performances in the implementation
109 of the parallel-tests 'check' and 'recheck' targets have been fixed.
111 - The post-processing of output "#line" directives done the ylwrap
112 script is more faithful w.r.t. files in a subdirectory; for example,
113 if the processed file is "src/grammar.y", ylwrap will correctly
114 produce directives like:
115 #line 7 "src/grammar.y"
120 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
124 * Obsolete features removed:
126 - The never documented nor truly used script 'acinstall' has been
129 - Support for automatic de-ANSI-fication has been removed.
131 - The support for the "obscure" multilib feature has been removed
132 from Automake core (but remains available in the 'contrib/'
133 directory of the Automake distribution).
135 - Support for ".log -> .html" conversion and the check-html and
136 recheck-html targets has been removed from Automake core (but
137 remains available in the 'contrib/' directory of the Automake
140 - The deprecated 'lzma' compression format for distribution archives
141 has been removed, in favor of 'xz' and 'lzip'.
143 - The obsolete AM_WITH_REGEX macro has been removed.
145 - The long-deprecated options '--output-dir', '--Werror' and
146 '--Wno-error' have been removed.
148 - The chapter on the history of Automake has been moved out of the
149 reference manual, into a new dedicated Texinfo file.
153 - New 'cscope' target to build a cscope database for the source tree.
155 * Changes to Automake-generated testsuite harnesses:
157 - The new automake option 'serial-tests' has been introduced. It can
158 be used to explicitly instruct automake to use the older serial
159 testsuite harness. This is still the default at the moment, but it
160 might change in future versions.
162 - The 'recheck' target (provided by the parallel testsuite harness) now
163 depends on the 'all' target. This allows for a better user-experience
164 in test-driven development. See automake bug#11252.
166 - Test scripts that exit with status 99 to signal an "hard error" (e.g.,
167 and unexpected or internal error, or a failure to set up the test case
168 scenario) have their outcome reported as an 'ERROR' now. Previous
169 versions of automake reported such an outcome as a 'FAIL' (the only
170 difference with normal failures being that hard errors were counted
171 as failures even when the test originating them was listed in
174 - The testsuite summary displayed by the parallel-test harness has a
175 completely new format, that always list the numbers of passed, failed,
176 xfailed, xpassed, skipped and errored tests, even when these numbers
177 are zero (but using smart coloring when the color-tests option is in
180 - The default testsuite driver offered by the 'parallel-tests' option is
181 now implemented (partly at least) with the help of automake-provided
182 auxiliary scripts (e.g., 'test-driver'), instead of relying entirely
183 on code in the generated Makefile.in.
184 This has two noteworthy implications. The first one is that projects
185 using the 'parallel-tests' option should now either run automake with
186 the '--add-missing' option, or manually copy the 'test-driver' script
187 into their tree. The second, and more important, implication is that
188 now, when the 'parallel-tests' option is in use, TESTS_ENVIRONMENT can
189 not be used anymore to define a test runner, and the command specified
190 in LOG_COMPILER (and <ext>_LOG_COMPILER) must be a *real* executable
191 program or script. For example, this is still a valid usage (albeit
194 TESTS_ENVIRONMENT = \
195 if test -n '$(STRICT_TESTS)'; then \
196 maybe_errexit='-e'; \
200 LOG_COMPILER = $(SHELL) $$maybe_errexit
202 while this is not anymore:
204 TESTS_ENVIRONMENT = \
205 $(SHELL) `test -n '$(STRICT_TESTS_CHECKING)' && echo ' -e'`
209 TESTS_ENVIRONMENT = \
210 run_with_perl_or_shell () \
212 if grep -q '^#!.*perl' $$1; then
218 LOG_COMPILER = run_with_perl_or_shell
220 - The package authors can now use customary testsuite drivers within
221 the framework provided by the 'parallel-tests' testsuite harness.
222 Consistently with the existing syntax, this can be done by defining
223 special makefile variables 'LOG_DRIVER' and '<ext>_LOG_DRIVER'.
225 - A new developer-reserved variable 'AM_TESTS_FD_REDIRECT' can be used
226 to redirect/define file descriptors used by the test scripts.
228 - The parallel-tests harness generates now, in addition the '.log' files
229 holding the output produced by the test scripts, a new set of '.trs'
230 files, holding "metadata" derived by the execution of the test scripts;
231 among such metadata are the outcomes of the test cases run by a script.
233 - Initial and still experimental support for the TAP test protocol is
236 * Changes to Yacc and Lex support:
238 - C source and header files derived from non-distributed Yacc and/or
239 Lex sources are now removed by a simple "make clean" (while they were
240 previously removed only by "make maintainer-clean").
242 - Slightly backward-incompatible change, relevant only for use of Yacc
243 with C++: the extensions of the header files produced by the Yacc
244 rules are now modelled after the extension of the corresponding
245 sources. For example, yacc files named "foo.y++" and "bar.yy" will
246 produce header files named "foo.h++" and "bar.hh" respectively, where
247 they would have previously produced header files named simply "foo.h"
248 and "bar.h". This change offers better compatibility with 'bison -o'.
250 * Miscellaneous changes:
252 - The AM_PROG_VALAC macro now causes configure to exit with status 77,
253 rather than 1, if the vala compiler found is too old.
255 - The build system of Automake itself now avoids the use of make
256 recursion as much as possible.
258 - Automake now prefers to quote 'like this' or "like this", rather
259 than `like this', in diagnostic message and generated Makefiles,
260 to accommodate the new GNU Coding Standards recommendations.
262 - Automake has a new option '--print-libdir' that prints the path of the
263 directory containing the Automake-provided scripts and data files.
265 - The 'dist' and 'dist-all' targets now can run compressors in parallel.
267 - The rules to create pdf, dvi and ps output from Texinfo files now
268 works better with modern 'texi2dvi' script, by explicitly passing
269 it the '--clean' option to ensure stray auxiliary files are not
270 left to clutter the build directory.
272 - Automake can now generate silenced rules for texinfo outputs.
274 - Some auxiliary files that are automatically distributed by Automake
275 (e.g., 'install-sh', or the 'depcomp' script for packages compiling
276 C sources) might now be listed in the DIST_COMMON variable in many
277 Makefile.in files, rather than in the top-level one.
279 - Messages of types warning or error from 'automake' and 'aclocal'
280 are now prefixed with the respective type, and presence of -Werror
283 - Automake's early configure-time sanity check now tries to avoid
284 sleeping for a second, which slowed down cached configure runs
285 noticeably. In that case, it will check back at the end of the
286 configure script to ensure that at least one second has passed, to
287 avoid time stamp issues with makefile rules rerunning autotools
290 - The warnings in the category 'extra-portability' are now enabled by
291 '-Wall'. In previous versions, one has to use '-Wextra-portability'
296 - Various minor bugfixes for recent or long-standing bugs.
298 * Bugs introduced by 1.11:
300 - The AM_COND_IF macro also works if the shell expression for the
301 conditional is no longer valid for the condition.
303 - The automake-provided parallel testsuite harness does not fail anymore
304 with BSD make used in parallel mode when there are test scripts in a
305 subdirectory, like in:
307 TESTS = sub/foo.test sub/bar.test
309 * Long-standing bugs:
311 - Automake's own build system finally have a real "installcheck" target.
313 - Vala-related cleanup rules are now more complete, and work better in
316 - Files listed with the AC_REQUIRE_AUX_FILE macro in configure.ac are
317 now automatically distributed also if the directory of the auxiliary
318 files coincides with the top-level directory.
320 - Automake now detects the presence of the '-d' flag in the various
321 '*YFLAGS' variables even when their definitions involve indirections
322 through other variables, such as in:
324 AM_YFLAGS = $(foo_opts)
326 - Automake now complains if a '*YFLAGS' variable has any conditional
327 content, not only a conditional definition.
329 - Explicit enabling and/or disabling of Automake warning categories
330 through the '-W...' options now always takes precedence over the
331 implicit warning level implied by Automake strictness (foreign, gnu
332 or gnits), regardless of the order in which such strictness and
333 warning flags appear. For example, a setting like:
334 AUTOMAKE_OPTIONS = -Wall --foreign
335 will cause the warnings in category 'portability' to be enabled, even
336 if those warnings are by default disabled in 'foreign' strictness.
338 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
340 Bugs fixed in 1.11.5:
342 * Bugs introduced by 1.11.3:
344 - Vala files with '.vapi' extension are now recognized and handled
345 correctly again. See automake bug#11222.
347 - Vala support work again for projects that contain some program
348 built from '.vala' (and possibly '.c') sources and some other
349 program built from '.c' sources *only*. See automake bug#11229.
351 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
355 * Miscellaneous changes:
357 - The 'ar-lib' script now ignores the "s" (symbol index) and "S" (no
358 symbol index) modifiers as well as the "s" action, as the symbol index
359 is created unconditionally by Microsoft lib. Also, the "q" (quick)
360 action is now a synonym for "r" (replace). Also, the script has been
361 ignoring the "v" (verbose) modifier already since Automake 1.11.3.
363 - When the 'compile' script is used to wrap MSVC, it now accepts an
364 optional space between the -I, -L and -l options and their respective
365 arguments, for better POSIX compliance.
367 - There is an initial, experimental support for automatic dependency
368 tracking with tcc (the Tiny C Compiler). Its associated depmode is
369 currently recognized as "icc" (but this and other details are likely
370 to change in future versions).
372 - Automatic dependency tracking now works also with the IBM XL C/C++
373 compilers, thanks to the new new depmode 'xlc'.
375 Bugs fixed in 1.11.4:
377 * Bugs introduced by 1.11.2:
379 - A definition of 'noinst_PYTHON' before 'python_PYTHON' (or similar)
380 don't cause spurious failures upon "make install" anymore.
382 - The user can now instruct the 'uninstall-info' rule not to update
383 the '${infodir}/dir' file by exporting the environment variable
384 'AM_UPDATE_INFO_DIR' to the value "no". This is done for consistency
385 with how the 'install-info' rule operates since automake 1.11.2.
387 * Long-standing bugs:
389 - It is now possible for a foo_SOURCES variable to hold Vala sources
390 together with C header files, as well as with sources and headers for
391 other supported languages (e.g., C++). Previously, only mixing C and
392 Vala sources was supported.
394 - If "aclocal --install" is used, and the first directory specified with
395 '-I' is non-existent, aclocal will now create it before trying to copy
398 - An empty declaration of a "foo_PRIMARY" don't cause anymore the
399 generated install rules to create an empty $(foodir) directory;
400 for example, if Makefile.am contains something like:
404 pkglibexec_SCRIPTS += bar.sh
407 the $(pkglibexec) directory will not be created upon "make install".
409 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
413 * Miscellaneous changes:
415 - Automake's own build system is more silent by default, making use of
416 the 'silent-rules' option.
418 - The master copy of the `gnupload' script is now maintained in gnulib,
421 - The `missing' script doesn't try to wrap calls to `tar' anymore.
423 - "make dist" doesn't wrap `tar' invocations with the `missing' script
424 anymore. Similarly, the obsolescent variable `$(AMTAR)' (which you
425 shouldn't be using BTW ;-) does not invoke the missing script anymore
426 to wrap tar, but simply invokes the `tar' program itself.
428 - "make dist" can now create lzip-compressed tarballs.
430 - In the Automake info documentation, the Top node and the nodes about
431 the invocation of the automake and aclocal programs have been renamed;
432 now, calling "info automake" will open the Top node, while calling
433 "info automake-invocation" and "info aclocal-invocation" will access
434 the nodes about the invocation of respectively automake and aclocal.
436 - Automake is now distributed as a gzip-compressed and an xz-compressed
437 tarball. Previously, bzip2 was used instead of xz.
439 - The last relics of Python 1.5 support have been removed from the
440 AM_PATH_PYTHON macro.
442 - For programs and libraries, automake now detects EXTRA_foo_DEPENDENCIES
443 and adds them to the normal list of dependencies, but without
444 overwriting the foo_DEPENDENCIES variable, which is normally computed
447 Bugs fixed in 1.11.3:
449 * Bugs introduced by 1.11.2:
451 - Automake now correctly recognizes the prefix/primary combination
452 `pkglibexec_SCRIPTS' as valid.
454 - The parallel-tests harness doesn't trip anymore on sed implementations
455 with stricter limits on the length of input lines (problem seen at
458 * Long-standing bugs:
460 - The "deleted header file problem" for *.am files is avoided by stub
461 rules. This allows `make' to trigger a rerun of `automake' also if
462 some previously needed `.am' file has been removed.
464 - The `silent-rules' option now generates working makefiles even
465 for the uncommon `make' implementations that do not support the
466 nested-variables extension to POSIX 2008. For such `make'
467 implementations, whether a build is silent is determined at
468 configure time, and cannot be overridden at make time with
469 `make V=0' or `make V=1'.
471 - Vala support now works better in VPATH setups.
473 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
477 * Changes to aclocal:
479 - The `--acdir' option is deprecated. Now you should use the new options
480 `--automake-acdir' and `--system-acdir' instead.
482 - The `ACLOCAL_PATH' environment variable is now interpreted as a
483 colon-separated list of additional directories to search after the
484 automake internal acdir (by default ${prefix}/share/aclocal-APIVERSION)
485 and before the system acdir (by default ${prefix}/share/aclocal).
487 * Miscellaneous changes:
489 - The Automake support for automatic de-ANSI-fication has been
490 deprecated. It will probably be removed in the next major Automake
493 - The `lzma' compression scheme and associated automake option `dist-lzma'
494 is obsoleted by `xz' and `dist-xz' due to upstream changes.
496 - You may adjust the compression options used in dist-xz and dist-bzip2.
497 The default is now merely -e for xz, but still -9 for bzip; you may
498 specify a different level via the XZ_OPT and BZIP2 envvars respectively.
499 E.g., "make dist-xz XZ_OPT=-7" or "make dist-bzip2 BZIP2=-5"
501 - The `compile' script now converts some options for MSVC for a better
502 user experience. Similarly, the new `ar-lib' script wraps Microsoft lib.
504 - The py-compile script now accepts empty arguments passed to the options
505 `--destdir' and `--basedir', and complains about unrecognized options.
506 Moreover, a non-option argument or a special `--' argument terminates
509 - A developer that needs to pass specific flags to configure at "make
510 distcheck" time can now, and indeed is advised to, do so by defining
511 the developer-reserved makefile variable AM_DISTCHECK_CONFIGURE_FLAGS,
512 instead of the old DISTCHECK_CONFIGURE_FLAGS.
513 The DISTCHECK_CONFIGURE_FLAGS variable should now be reserved for the
514 user; still, the old Makefile.am files that used to define it will
515 still continue to work as before.
517 - New macro AM_PROG_AR that looks for an archiver and wraps it in the new
518 'ar-lib' auxiliary script if the selected archiver is Microsoft lib.
519 This new macro is required for LIBRARIES and LTLIBRARIES when automake
520 is run with -Wextra-portability and -Werror.
522 - When using DejaGnu-based testsuites, the user can extend the `site.exp'
523 file generated by automake-provided rules by defining the special make
524 variable `$(EXTRA_DEJAGNU_SITE_CONFIG)'.
526 - The `install-info' rule can now be instructed not to create/update
527 the `${infodir}/dir' file, by exporting the new environment variable
528 `AM_UPDATE_INFO_DIR' to the value "no".
530 Bugs fixed in 1.11.2:
532 * Bugs introduced by 1.11:
534 - The parallel-tests driver no longer produces erroneous results with
535 Tru64/OSF 5.1 sh upon unreadable log files.
537 - The `parallel-tests' test driver does not report spurious successes
538 when used with concurrent FreeBSD make (e.g., "make check -j3").
540 - When the parallel-tests driver is in use, automake now explicitly
541 rejects invalid entries and conditional contents in TEST_EXTENSIONS,
542 instead of issuing confusing and apparently unrelated error messages
543 (e.g., "non-POSIX variable name", "bad characters in variable name",
544 or "redefinition of TEST_EXTENSIONS), or even, in some situations,
545 silently producing broken `Makefile.in' files.
547 - The `silent-rules' option now truly silences all compile rules, even
548 when dependency tracking is disabled. Also, when `silent-rules' is
549 not used, `make' output no longer contains spurious backslash-only
550 lines, thus once again matching what Automake did before 1.11.
552 - The AM_COND_IF macro also works if the shell expression for the
553 conditional is no longer valid for the condition.
555 * Long-standing bugs:
557 - The order of Yacc and Lex flags is fixed to be consistent with other
558 languages: $(AM_YFLAGS) comes before $(YFLAGS), and $(AM_LFLAGS) before
559 $(LFLAGS), so that the user variables override the developer variables.
561 - "make distcheck" now correctly complains also when "make uninstall"
562 leaves one and only one file installed in $(prefix).
564 - A "make uninstall" issued before a "make install", or after a mere
565 "make install-data" or a mere "make install-exec" does not spuriously
568 - Automake now warns about more primary/directory invalid combinations,
569 such as "doc_LIBRARIES" or "pkglib_PROGRAMS".
571 - Rules generated by Automake now try harder to not change any files when
572 `make -n' is invoked. Fixes include compilation of Emacs Lisp, Vala, or
573 Yacc source files and the rule to update config.h.
575 - Several scripts and the parallel-tests testsuite driver now exit with
576 the right exit status upon receiving a signal.
578 - A per-Makefile.am setting of -Werror does not erroneously carry over
579 to the handling of other Makefile.am files.
581 - The code for automatic dependency tracking works around a Solaris
582 make bug triggered by sources containing repeated slashes when the
583 `subdir-objects' option was used.
585 - The makedepend and hp depmodes now work better with VPATH builds.
587 - Java sources specified with check_JAVA are no longer compiled for
588 "make all", but only for "make check".
590 - An usage like "java_JAVA = foo.java" will now cause Automake to warn
591 and error out if `javadir' is undefined, instead of silently producing
592 a broken Makefile.in.
594 - aclocal and automake now honour the configure-time definitions of
595 AUTOCONF and AUTOM4TE when they spawn autoconf or autom4te processes.
597 - The `install-info' recipe no longer tries to guess whether the
598 `install-info' program is from Debian or from GNU, and adaptively
599 change its behaviour; this has proven to be frail and easy to
602 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
604 Bugs fixed in 1.11.1:
606 - Lots of minor bugfixes.
608 * Bugs introduced by 1.11:
610 - The `parallel-tests' test driver works around a GNU make 3.80 bug with
611 trailing white space in the test list (`TESTS = foo $(EMPTY)').
613 * Long standing bugs:
615 - On Darwin 9, `pythondir' and `pyexecdir' pointed below `/Library/Python'
616 even if the `--prefix' argument pointed outside of a system directory.
617 AM_PATH_PYTHON has been fixed to ignore the value returned from python's
618 `get_python_lib' function if it points outside the configured prefix,
619 unless the `--prefix' argument was either `/usr' or below `/System'.
621 - The testsuite does not try to change the mode of `ltmain.sh' files from
622 a Libtool installation (symlinked to test directories) any more.
624 - AM_PROG_GCJ uses AC_CHECK_TOOLS to look for `gcj' now, so that prefixed
625 tools are preferred in a cross-compile setup.
627 - The distribution is tarred up with mode 755 now by the `dist*' targets.
628 This fixes a race condition where untrusted users could modify files
629 in the $(PACKAGE)-$(VERSION) distdir before packing if the toplevel
630 build directory was world-searchable. This is CVE-2009-4029.
632 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
636 * Version requirements:
638 - Autoconf 2.62 or greater is required.
640 * Changes to aclocal:
642 - The autoconf version check implemented by aclocal in aclocal.m4
643 (and new in Automake 1.10) is degraded to a warning. This helps
644 in the common case where the Autoconf versions used are compatible.
646 * Changes to automake:
648 - The automake program can run multiple threads for creating most
649 Makefile.in files concurrently, if at least Perl 5.7.2 is available
650 with interpreter-based threads enabled. Set the environment variable
651 AUTOMAKE_JOBS to the maximum number of threads to use, in order to
652 enable this experimental feature.
654 * Changes to Libtool support:
656 - Libtool generic flags are now passed to the install and uninstall
659 - distcheck works with Libtool 2.x even when LT_OUTPUT is used, as
660 config.lt is removed correctly now.
664 - subdir-object mode works now with Fortran (F77, FC, preprocessed
665 Fortran, and Ratfor).
667 - For files with extension .f90, .f95, .f03, or .f08, the flag
668 $(FCFLAGS_f[09]x) computed by AC_FC_SRCEXT is now used in compile rules.
670 - Files with extension .sx are also treated as preprocessed assembler.
672 - The default source file extension (.c) can be overridden with
673 AM_DEFAULT_SOURCE_EXT now.
675 - Python 3.0 is supported now, Python releases prior to 2.0 are no
678 - AM_PATH_PYTHON honors python's idea about the site directory.
680 - There is initial support for the Vala programming language, when using
683 * Miscellaneous changes:
685 - Automake development is done in a git repository on Savannah now, see
687 http://git.sv.gnu.org/gitweb/?p=automake.git
689 A read-only CVS mirror is provided at
691 cvs -d :pserver:anonymous@pserver.git.sv.gnu.org:/automake.git \
692 checkout -d automake HEAD
694 - "make dist" can now create xz-compressed tarballs,
695 as well as (deprecated?) lzma-compressed tarballs.
697 - `automake --add-missing' will by default install the GPLv3 file as
698 COPYING if it is missing. It will also warn that the license file
699 should be added to source control. Note that Automake will never
700 overwrite an existing COPYING file, even when the `--force-missing'
703 - The manual is now distributed under the terms of the GNU FDL 1.3.
705 - Automake ships and installs man pages for automake and aclocal now.
707 - New shorthand `$(pkglibexecdir)' for `$(libexecdir)/@PACKAGE@'.
709 - install-sh supports -C, which does not update the installed file
710 (and its time stamps) if the contents did not change.
712 - The `gnupload' script has been revamped.
714 - The `depcomp' and `compile' scripts now work with MSVC under MSYS.
716 - The targets `install' and `uninstall' are more efficient now, in that
717 for example multiple files from one Automake variable such as
718 `bin_SCRIPTS' are copied in one `install' (or `libtool --mode=install')
719 invocation if they do not have to be renamed.
721 Both install and uninstall may sometimes enter (`cd' into) the target
722 installation directory now, when no build-local scripts are used.
724 Both install and uninstall do not fail anymore but do nothing if an
725 installation directory variable like `bindir' is set to the empty string.
727 For built-in rules, `make install' now fails reliably if installation
728 of a file failed. Conversely, `make uninstall' even succeeds when
729 issued multiple times.
731 These changes may need some adjustments from users: For example,
732 some `install' programs refuse to install multiple copies of the
733 same file in one invocation, so you may need to remove duplicate
734 entries from file lists.
736 Also, within one set of files, say, nobase_data_DATA, the order of
737 installation may be changed, or even unstable among different hosts,
738 due to the use of associative arrays in awk. The increased use of
739 awk matches a similar move in Autoconf to provide for better scaling.
741 Further, most undocumented per-rule install command variables such as
742 binSCRIPT_INSTALL have been removed because they are not needed any
743 more. Packages which use them should be using the appropriate one of
744 INSTALL_{DATA,PROGRAM,SCRIPT} or their install_sh_{DATA,PROGRAM,SCRIPT}
745 counterpart, depending on the type of files and the need for automatic
746 target directory creation.
748 - The "deleted header file problem" for *.m4 files is avoided by
749 stub rules. This allows `make' to trigger a rerun of `aclocal'
750 also if some previously needed macro file has been removed.
752 - Rebuild rules now also work for a removed `subdir/Makefile.in' in
753 an otherwise up to date tree.
755 - The `color-tests' option causes colored test result output on terminals.
757 - The `parallel-tests' option enables a new test driver that allows for
758 parallel test execution, inter-test dependencies, lazy test execution
759 for unit-testing, re-testing only failed tests, and formatted result output
760 as RST (reStructuredText) and HTML. Enabling this option may require some
761 changes to your test suite setup; see the manual for details.
763 - The `silent-rules' option enables Linux kernel-style silent build output.
764 This option requires the widely supported but non-POSIX `make' feature
765 of recursive variable expansion, so do not use it if your package needs
766 to build with `make' implementations that do not support it.
768 To enable less verbose build output, the developer has to use the Automake
769 option `silent-rules' in `AM_INIT_AUTOMAKE', or call the `AM_SILENT_RULES'
770 macro. The user may then set the default verbosity by passing the
771 `--enable-silent-rules' option to `configure'. At `make' run time, this
772 default may be overridden using `make V=0' for less verbose, and `make V=1'
773 for backward-compatible verbose output.
775 - New prefix `notrans_' for manpages which should not be transformed
776 by --program-transform.
778 - New macro AM_COND_IF for conditional evaluation and conditional
781 - For AC_CONFIG_LINKS, if source and destination are equal, do not
782 remove the file in a non-VPATH build. Such setups work with Autoconf
785 - AM_MAINTAINER_MODE now allows for an optional argument specifying
788 - AM_SUBST_NOTMAKE may prevent substitution of AC_SUBSTed variables,
789 useful especially for multi-line values.
791 - Automake's early configure-time sanity check now diagnoses an
792 unsafe absolute source directory name and makes configure fail.
794 - The Automake macros and rules cope better with whitespace in the
795 current directory name, as long as the relative path to `configure'
796 does not contain whitespace. To this end, the values of `$(MISSING)'
797 and `$(install_sh)' may contain suitable quoting, and their expansion
798 might need `eval'uation if used outside of a makefile. These
799 undocumented variables may be used in several documented macros such
800 as $(AUTOCONF) or $(MAKEINFO).
804 * Long-standing bugs:
806 - Fix aix dependency tracking for libtool objects.
808 - Work around AIX sh quoting issue in AC_PROG_CC_C_O, leading to
809 unnecessary use of the `compile' script.
811 - For nobase_*_LTLIBRARIES with nonempty directory components, the
812 correct `-rpath' argument is used now.
814 - `config.status --file=Makefile depfiles' now also works with the
815 extra quoting used internally by Autoconf 2.62 and newer
816 (it used to work only without the `--file=' bit).
818 - The `missing' script works better with versioned tool names.
820 - Semantics for `missing help2man' have been revamped:
822 Previously, if `help2man' was not present, `missing help2man' would have
823 the following semantics: if some man page was out of date but present, then
824 a warning would be printed, but the exit status was 0. If the man page was
825 not present at all, then `missing' would create a replacement man page
826 containing an error message, and exit with a status of 2. This does not play
827 well with `make': the next run will see this particular man page as being up
828 to date, and will only error out on the next generated man page, if any;
829 repeat until all pages are done. This was not desirable.
831 These are the new semantics: if some man page is not present, and help2man
832 is not either, then `missing' will warn and generate the replacement page
833 containing the error message, but exit successfully. However, `make dist'
834 will ensure that no such bogus man pages are packaged into a tarball.
836 - Targets provided by automake behave better with `make -n', in that they
837 take care not to create files.
839 - `config.status Makefile... depfiles' works fine again in the presence of
840 disabled dependency tracking.
842 - The default no-op recursive rules for these targets also work with BSD make
843 now: html, install-html, install-dvi, install-pdf, install-pdf, install-info.
845 - `make distcheck' works also when both a directory and some file below it
846 have been added to a distribution variable, such as EXTRA_DIST or *_SOURCES.
848 - Texinfo dvi, ps, pdf, and html output files are not removed upon
849 `make mostlyclean' any more; only the LaTeX by-products are.
851 - Renamed objects also work with the `subdir-objects' option and
852 source file languages which Automake does not know itself.
854 - `automake' now correctly complains about variable assignments which are
855 preceded by a comment, extend over multiple lines with backslash-escaped
856 newlines, and end in a comment sign. Previous versions would silently
857 and wrongly ignore such assignments completely.
859 * Bugs introduced by 1.10:
861 - Fix output of dummy dependency files in presence of post-processed
862 Makefile.in's again, but also cope with long lines.
864 - $(EXEEXT) is automatically appended to filenames of XFAIL_TESTS
865 that have been declared as programs in the same Makefile.
866 This is for consistency with the analogous change to TESTS in 1.10.
868 - Fix order of standard includes to again be `-I. -I$(srcdir)',
869 followed by directories containing config headers.
871 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
875 * Version requirements:
877 - Autoconf 2.60 or greater is required.
879 - Perl 5.6 or greater is required.
881 * Changes to aclocal:
883 - aclocal now also supports -Wmumble and -Wno-mumble options.
885 - `dirlist' entries (for the aclocal search path) may use shell
886 wildcards such as `*', `?', or `[...]'.
888 - aclocal supports an --install option that will cause system-wide
889 third-party macros to be installed in the local directory
890 specified with the first -I flag. This option also uses #serial
891 lines in M4 files to upgrade local macros.
893 The new aclocal options --dry-run and --diff help to review changes
894 before they are installed.
896 - aclocal now outputs an autoconf version check in aclocal.m4 in
897 projects using automake.
899 For a few years, automake and aclocal have been calling autoconf
900 (or its underlying engine autom4te) to accurately retrieve the
901 data they need from configure.ac and its siblings. Doing so can
902 only work if all autotools use the same version of autoconf. For
903 instance a Makefile.in generated by automake for one version of
904 autoconf may stop working if configure is regenerated with another
905 version of autoconf, and vice versa.
907 This new version check ensures that the whole build system has
908 been generated using the same autoconf version.
910 * Support for new Autoconf macros:
912 - The new AC_REQUIRE_AUX_FILE Autoconf macro is supported.
914 - If `subdir-objects' is set, and AC_CONFIG_LIBOBJ_DIR is specified,
915 $(LIBOBJS), $(LTLIBOBJS), $(ALLOCA), and $(LTALLOCA) can be used
916 in different directories. However, only one instance of such a
917 library objects directory is supported.
919 * Change to Libtool support:
921 - Libtool generic flags (those that go before the --mode=MODE option)
922 can be specified using AM_LIBTOOLFLAGS and target_LIBTOOLFLAGS.
924 * Yacc and Lex changes:
926 - The rebuild rules for distributed Yacc and Lex output will avoid
927 overwriting existing files if AM_MAINTAINER_MODE and maintainer-mode
930 - ylwrap is now always used for lex and yacc source files,
931 regardless of whether there is more than one source per directory.
935 - Preprocessed assembler (*.S) compilation now honors CPPFLAGS,
936 AM_CPPFLAGS and per-target _CPPFLAGS, and supports dependency
937 tracking, unlike non-preprocessed assembler (*.s).
939 - subdir-object mode works now with Assembler. Automake assumes
940 that the compiler understands `-c -o'.
942 - Preprocessed assembler (*.S) compilation now also honors
943 $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES).
945 - Improved support for Objective C:
946 - Autoconf's new AC_PROG_OBJC will enable automatic dependency tracking.
947 - A new section of the manual documents the support.
949 - New support for Unified Parallel C:
950 - AM_PROG_UPC looks for a UPC compiler.
951 - A new section of the manual documents the support.
953 - Per-target flags are now correctly handled in link rules.
955 For instance maude_CFLAGS correctly overrides AM_CFLAGS; likewise
956 for maude_LDFLAGS and AM_LDFLAGS. Previous versions bogusly
957 preferred AM_CFLAGS over maude_CFLAGS while linking, and they
958 used both AM_LDFLAGS and maude_LDFLAGS on the same link command.
960 The fix for compiler flags (i.e., using maude_CFLAGS instead of
961 AM_CFLAGS) should not hurt any package since that is how _CFLAGS
962 is expected to work (and actually works during compilation).
964 However using maude_LDFLAGS "instead of" AM_LDFLAGS rather than
965 "in addition to" breaks backward compatibility with older versions.
966 If your package used both variables, as in
968 AM_LDFLAGS = common flags
970 a_LDFLAGS = more flags
973 and assumed *_LDFLAGS would sum up, you should rewrite it as
975 AM_LDFLAGS = common flags
977 a_LDFLAGS = $(AM_LDFLAGS) more flags
980 This new behavior of *_LDFLAGS is more coherent with other
981 per-target variables, and the way *_LDFLAGS variables were
982 considered internally.
984 * New installation targets:
986 - New targets mandated by GNU Coding Standards:
991 By default they will only install Texinfo manuals.
992 You can customize them with *-local variants:
998 - The undocumented recursive target `uninstall-info' no longer exists.
999 (`uninstall' is in charge of removing all possible documentation
1000 flavors, including optional formats such as dvi, ps, or info even
1001 when `no-installinfo' is used.)
1003 * Miscellaneous changes:
1005 - Automake no longer complains if input files for AC_CONFIG_FILES
1006 are specified using shell variables.
1008 - clean, distribution, or rebuild rules are normally disabled for
1009 inputs and outputs of AC_CONFIG_FILES, AC_CONFIG_HEADERS, and
1010 AC_CONFIG_LINK specified using shell variables. However, if these
1011 variables are used as ${VAR}, and AC_SUBSTed, then Automake will
1012 be able to output rules anyway.
1013 (See the Automake documentation for AC_CONFIG_FILES.)
1015 - $(EXEEXT) is automatically appended to filenames of TESTS
1016 that have been declared as programs in the same Makefile.
1017 This is mostly useful when some check_PROGRAMS are listed in TESTS.
1019 - `-Wportability' has finally been turned on by default for `gnu' and
1020 `gnits' strictness. This means, automake will complain about %-rules
1021 or $(GNU Make functions) unless you switch to `foreign' strictness or
1022 use `-Wno-portability'.
1024 - Automake now uses AC_PROG_MKDIR_P (new in Autoconf 2.60), and uses
1025 $(MKDIR_P) instead of $(mkdir_p) to create directories. The
1026 $(mkdir_p) variable is still defined (to the same value as
1027 $(MKDIR_P)) but should be considered obsolete. If you are using
1028 $(mkdir_p) in some of your rules, please plan to update them to
1029 $(MKDIR_P) at some point.
1031 - AM_C_PROTOTYPES and ansi2knr are now documented as being obsolete.
1032 They still work in this release, but may be withdrawn in a future one.
1034 - Inline compilation rules for gcc3-style dependency tracking are
1037 - Automake installs a "Hello World!" example package in $(docdir).
1038 This example is used throughout the new "Autotools Introduction"
1039 chapter of the manual.
1041 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1045 * Makefile.in bloat reduction:
1047 - Inference rules are used to compile sources in subdirectories when
1048 the `subdir-objects' option is used and no per-target flags are
1049 used. This should reduce the size of some projects a lot, because
1050 Automake used to output an explicit rule for each such object in
1053 - Automake no longer outputs three rules (.o, .obj, .lo) for each
1054 object that must be built with explicit rules. It just outputs
1055 the rules required to build the kind of object considered: either
1056 the two .o and .obj rules for usual objects, or the .lo rule for
1059 * Change to Libtool support:
1061 - Libtool tags are used with libtool versions that support them.
1062 (I.e., with Libtool 1.5 or greater.)
1064 - Automake is now able to handle setups where a libtool library is
1065 conditionally installed in different directories, as in
1068 lib_LTLIBRARIES = liba.la
1070 pkglib_LTLIBRARIES = liba.la
1072 liba_la_SOURCES = ...
1074 * Changes to aclocal:
1076 - aclocal now ensures that AC_DEFUNs and AU_DEFUNs it discovers are
1077 really evaluated, before it decides to include them in aclocal.m4.
1078 This solves nasty problems with conditional redefinitions of
1079 Autoconf macros in /usr/share/aclocal/*.m4 files causing extraneous
1080 *.m4 files to be included in any project using these macros.
1081 (Calls to AC_PROG_EGREP causing libtool.m4 to be included is the
1082 most famous instance of this bug.)
1084 - Do not complain about missing conditionally AC_REQUIREd macros
1085 that are not actually used. In 1.8.x aclocal would correctly
1086 determine which of these macros were really needed (and include
1087 only these in the package); unfortunately it would also require
1088 all of them to be present in order to run. This created
1089 situations were aclocal would not work on a tarball distributing
1090 all the macros it uses. For instance running aclocal on a project
1091 containing only the subset of the Gettext macros in use by the
1092 project did not work, because gettext conditionally requires other
1095 * Portability improvements:
1097 - Tar format can be chosen with the new options tar-v7, tar-ustar, and
1098 tar-pax. The new option filename-length-max=99 helps diagnosing
1099 filenames that are too long for tar-v7. (PR/414)
1101 - Variables aumented with `+=' are now automatically flattened (i.e.,
1102 trailing backslashes removed) and then wrapped around 80 colummns
1103 (adding trailing backslashes). In previous versions, a long series
1109 would result in a single-line definition of VAR that could possibly
1110 exceed the maximum line length of some make implementations.
1112 Non-augmented variables are still output as they are defined in
1117 - Support Fortran 90/95 with the new "fc" and "ppfc" languages.
1118 Works the same as the old Fortran 77 implementation; just replace
1119 F77 with FC everywhere (exception: FFLAGS becomes FCFLAGS).
1120 Requires a version of autoconf which provides AC_PROG_FC (>=2.59).
1122 - Support for conditional _LISP.
1124 - Support for conditional -hook and -local rules (PR/428).
1126 - Diagnose AC_CONFIG_AUX_DIR calls following AM_INIT_AUTOMAKE. (PR/49)
1128 - Automake will not write any Makefile.ins after the first error it
1129 encounters. The previous Makefile.ins (if any) will be left in
1130 place. (Warnings will not prevent output, but remember they can
1131 be turned into errors with -Werror.)
1133 - The restriction that SUBDIRS must contain direct children is gone.
1136 - The manual tells more about SUBDIRS vs. DIST_SUBDIRS.
1137 It also gives an example of nested packages using AC_CONFIG_SUBDIRS.
1139 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1141 Bugs fixed in 1.8.5:
1143 * Long-standing bugs:
1145 - Define DIST_SUBDIRS even when the `no-dist' or `cygnus' options are used
1146 so that `make distclean' and `make maintainer-clean' can work.
1148 - Define AR and ARFLAGS even when only EXTRA_LIBRARIES are defined.
1150 - Fix many rules to please FreeBSD make, which runs commands with `sh -e'.
1152 - Polish diagnostic when no input file is found.
1154 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1156 Bugs fixed in 1.8.4:
1158 * Long-standing bugs:
1160 - Fix AM_PATH_PYTHON to correctly display $PYTHON when it has been
1161 overridden by the user.
1163 - Honor PATH_SEPARATOR in various places of the Automake package, for
1166 - Adjust dependency tracking mode detection to ICC 8.0's new output.
1169 - Fix install-sh so it can install the `mv' binary... using `mv'.
1171 - Fix tru64 dependency tracking for libtool objects.
1173 - Work around Exuberant Ctags when creating a TAGS files in a directory
1174 without files to scan but with subdirectories to include.
1176 * Bugs introduced by 1.8:
1178 - Fix an "internal error" when @LIBOBJS@ is used in a variable that is
1179 not defined in the same conditions as the _LDADD that uses it.
1181 - Do not warn when JAVAROOT is overridden, this is legitimate.
1183 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1185 Bugs fixed in 1.8.3:
1187 * Long-standing bugs:
1189 - Quote filenames in installation rules, in case $DESTDIR, $prefix,
1190 or any of the other *dir variables contain a space.
1192 Please note that Automake does not and cannot support spaces in
1193 filenames that are involved during the build. This change affects
1194 only installation paths, so that `make install' does not bomb out
1195 in packages configured with
1196 ./configure --prefix '/c/Program Files'
1198 - Fix the depfiles output so it works with GNU sed (<4.1) even when
1199 POSIXLY_CORRECT is set.
1201 - Do not AC_SUBST(LIBOBJS) in AM_WITH_REGEX. This macro was unusable
1202 since Autoconf 2.54, which defines LIBOBJS itself.
1204 - Fix a potential (but unlikely) race condition in parallel elisp
1205 builds. (Introduced in 1.7.3.)
1207 - Do not assume that users override _DEPENDENCIES in all conditions
1208 where Automake will try to define them.
1210 - Do not use `mkdir -p' in mkinstalldirs, unless this is GNU mkdir.
1211 Solaris 8's `mkdir -p' is not thread-safe and can break parallel
1214 This fix also affects the $(mkdir_p) variable defined since
1215 Automake 1.8. It will be set to `mkdir -p' only if mkdir is GNU
1216 mkdir, and to `mkinstalldirs' or `install-sh -d' otherwise.
1218 - Secure temporary directory creation in `make distcheck'. (PR/413)
1220 - Do not generate two build rules for `parser.h' when the
1221 parser appears in two different conditionals.
1223 - Work around a Solaris 8 /bin/sh bug in the test for dependency
1224 checking. Usually ./configure will not pick this shell; so this
1225 fix only helps cases where the shell is forced to /bin/sh.
1227 * Bugs introduced by 1.8:
1229 - In some situations (hand-written `m4_include's), aclocal would
1230 call the `File::Spec->rel2abs' method, which was only introduced
1231 in Perl 5.6. This new version reestablish support Perl 5.005.
1233 It is likely that the next major Automake releases will require at
1234 least Perl 5.6. Consider upgrading your development environment
1235 if you are still using the five-year-old Perl 5.005.
1237 - Automake would sometimes fail to define rules for targets listed
1238 in variables defined in multiple conditions. For instance on
1244 it would define only the `a.$(OBJEXT): a.c' rule and omit the
1245 `b.$(OBJEXT): b.c' rule.
1247 * New sections in manual:
1249 - Third-Party Makefiles: how to interface third party Makefiles.
1250 - Upgrading: upgrading packages to newer Automake versions.
1251 - Multiple Outputs: handling tools that produce many outputs.
1253 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1257 * A (well known) portability bug slipped in the changes made to
1258 install-sh in Automake 1.8.1. The broken install-sh would refuse to
1259 install anything on Tru64.
1261 * Fix install rules for conditionally built python files. (This never
1264 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1268 * Bugs introduced by 1.8:
1270 - Fix Config.pm import error with old Perl versions (at least
1271 5.005_03). One symptom is that aclocal could not find its macro
1274 - Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
1275 created by `make install' are always world readable, even if the
1276 installer happens to have an overly restrictive umask (e.g. 077).
1277 This was a mistake and has been reverted. There are at least two
1278 reasons why we must not use `-m 0755':
1279 - it causes special bits like SGID to be ignored,
1280 - it may be too restrictive (some setups expect 775 directories).
1282 - Fix aclocal to honor definitions located in files which have been
1283 m4_included manually. aclocal 1.8 had been updated to check
1284 m4_included files for new requirements, but forgot that these
1285 m4_included files can also provide new definitions.
1287 Note that if you have such a setup, we recommend you get rid of
1288 it. In the past, there was a reason to m4_include files manually:
1289 aclocal used to duplicate entire M4 files into aclocal.m4, even
1290 files that were distributed. Some packages were therefore
1291 m4_including the distributed file directly, and playing some
1292 tricks to ensure aclocal would not copy that file to aclocal.m4,
1293 in order to limit the amount of duplication. Since aclocal 1.8.x
1294 will precisely output m4_includes for local M4 files, we recommend
1295 that you clean up your setup, removing all manual m4_includes and
1296 letting aclocal output them.
1298 - Output detailed menus in the Info version if the Automake manual,
1299 so that Emacs can locate the indexes.
1301 - configure.ac and configure were listed twice in DIST_COMMON (an
1302 internal variable where Automake lists configury files to
1303 distribute). This was harmless, but unaesthetic.
1305 - Use `chmod a-w' instead of `chmod -w' as the latter honors umask.
1306 This was an issue only in the Automake package itself, not in
1309 - Automake assumed that all AC_CONFIG_LINKS arguments had the form
1310 DEST:SRC. This was wrong, as some packages do
1311 AC_CONFIG_LINKS($computedlinks). This version no longer abort in
1314 - Contrary to mkinstalldirs, $(mkdir_p) was expecting exactly one
1315 argument. This caused two kinds of failures:
1316 - Rules installing data in a conditionally defined directory
1317 failed when that directory was undefined. In this case no
1318 argument was supplied.
1319 - `make installdirs' failed, because several directories were
1320 passed to $(mkdir_p). This was an issue only on platform
1321 were $(mkdir_p) is implemented with `install-sh -d'.
1322 $(mkdir_p) as been changed to accept 0 or more arguments, as
1325 * Long-standing bugs:
1327 - Fix an unexpected diagnostic occurring when users attempt
1328 to override some internal variables that Automake appends to.
1330 - aclocal now scans configure.ac for macro definitions (PR/319).
1332 - Fix a portability issue with OSF1/Tru64 Make. If a directory
1333 distributes files which are outside itself (this usually occurs
1334 when using AC_CONFIG_AUX_DIR([../dir]) to use auxiliary files
1335 from a parent package), then `make distcheck' fails due to an
1336 optimization performed by OSF1/Tru64 Make in its VPATH handling.
1337 (tests/subpkg2.test failure)
1339 - Fix another portability issue with Sun and OSF1/Tru64 Make.
1340 In a VPATH-build configuration, `make install' would install
1341 nobase_ files to wrong locations.
1343 - Fix a Perl `uninitialized value' diagnostic occurring when
1344 automake complains that a Texinfo file does not have a
1345 @setfilename statement.
1347 - Erase config.status.lineno during `make distclean'. This file
1348 can be created by config.status. Automake already knew about
1349 configure.lineno, but forgot config.status.lineno.
1351 - Distribute all files, even those which are built and installed
1352 conditionally. This change affects files listed in conditionally
1353 defined *_HEADERS and *_PYTHON variable (unless they are nodist_*)
1354 as well as those listed in conditionally defined dist_*_DATA,
1355 dist_*_JAVA, dist_*_LISP, and dist_*_SCRIPTS variables.
1357 - Fix AM_PATH_LISPDIR to avoid \? in sed regular expressions; it
1358 doesn't conform to POSIX.
1360 - Normalize help strings for configure variables and options added
1365 - Check for python2.4 in AM_PATH_PYTHON.
1367 * Spurious failures in test suite:
1369 - tests/libtool5.test, tests/ltcond.test, tests/ltcond2.test,
1370 tests/ltconv.test: fix failures with CVS Libtool.
1371 - tests/aclocal6.test: fix failure if autom4te.cache is disabled.
1372 - tests/txinfo24.test, tests/txinfo25.test, tests/txinfo28.test:
1373 fix failures with old Texinfo versions.
1375 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1381 - The NEWS file is more verbose.
1385 - Autoconf 2.58 or greater is required.
1389 - Default source file names in the absence of a _SOURCES declaration
1390 are made by removing any target extension before appending `.c', so
1391 to make the libtool module `foo.la' from `foo.c', you only need to
1394 lib_LTLIBRARIES = foo.la
1395 foo_la_LDFLAGS = -module
1397 For backward compatibility, foo_la.c will be used instead of
1398 foo.c if this file exists or is the explicit target of a rule.
1399 However -Wobsolete will warn about this deprecated naming.
1401 - AR's `cru' flags are now set in a global ARFLAGS variable instead
1402 of being hard-coded in each $(AR) invocation, so they can be
1403 substituted from configure.ac. This has been requested by people
1404 dealing with non-POSIX ar implementations.
1406 - New warning option: -Woverride. This will warn about any user
1407 target or variable definitions which override Automake
1410 - Texinfo rules back up and restore info files when makeinfo fails.
1412 - Texinfo rules now support the `html' target.
1413 Running this requires Texinfo 4.0 or greater.
1415 `html' is a new recursive target, so if your package mixes
1416 hand-crafted `Makefile.in's with Automake-generated
1417 `Makefile.in's, you should adjust the former to support (or
1418 ignore) this target so that `make html' recurses successfully. If
1419 you had a custom `html' rule in your `Makefile.am', it's better to
1420 rename it as `html-local', otherwise your rule will override
1421 Automake's new rule (you can check that by running `automake
1422 -Woverride') and that will stop the recursion to subdirectories.
1424 Last but not least, this `html' rule is declared PHONY, even when
1425 overridden. Fortunately, it appears that few packages use a
1426 non-PHONY `html' rule.
1428 - Any file which is m4_included from configure.ac will appear as a
1429 configure and Makefile.in dependency, and will be automatically
1432 - The rules for rebuilding Makefiles and Makefile.ins will now
1433 rebuild all Makefiles and all Makefile.ins at once when one of
1434 configure's dependencies has changed. This is considerably faster
1435 than previous implementations, where config.status and automake
1436 were run separately in each directory (this still happens when you
1437 change a Makefile.am locally, without touching configure.ac or
1438 friends). Doing this also solves a longstanding issue: these
1439 rebuild rules failed to work when adding new directories to the
1440 tree, forcing you to run automake manually.
1442 - For similar reasons, the rules to rebuild configure,
1443 config.status, and aclocal.m4 are now defined in all directories.
1444 Note that if you were using the CONFIG_STATUS_DEPENDENCIES and
1445 CONFIGURE_DEPENDENCIES (formerly undocumented) variables, you
1446 should better define them in all directories. This is easily done
1447 using an AC_SUBST (make sure you prefix these dependencies with
1448 $(top_srcdir) since this variable will appear at different
1449 levels of the build tree).
1451 - aclocal will now use `m4_include' instead of copying local m4
1452 files into aclocal.m4. (Local m4 files are those you ship with
1453 your project, other files will be copied as usual.)
1455 Because m4_included files are automatically distributed, it means
1456 for most projects there is no point in EXTRA_DISTing the list of
1457 m4 files which are used. (You can probably get rid of
1458 m4/Makefile.am if you had one.)
1460 - aclocal will avoid touching aclocal.m4 when possible, so that
1461 Autom4te's cache isn't needlessly invalidated. This behavior can
1462 be switched off with the new `--force' option.
1464 - aclocal now uses Autoconf's --trace to detect macros which are
1465 actually used and will no longer include unused macros simply
1466 because they where mentioned. This was often the case for macros
1467 called conditionally.
1469 - New options no-dist and no-dist-gzip.
1471 - compile, depcomp, elisp-comp, install-sh, mdate-sh, mkinstalldirs,
1472 py-compile, and ylwrap, now all understand --version and --help.
1474 - Automake will now recognize AC_CONFIG_LINKS so far as removing created
1475 links as part of the distclean target and including source files in
1478 - AM_PATH_PYTHON now supports ACTION-IF-FOUND and ACTION-IF-NOT-FOUND
1479 argument. The latter can be used to override the default behavior
1480 (which is to abort).
1482 - Automake will exit with $? = 63 on version mismatch. (So does
1483 Autoconf 2.58) missing knows this, and in this case it will
1484 emulate the tools as if they were absent. Because older versions
1485 of Automake and Autoconf did not use this exit code, this change
1486 will only be useful in projects generated with future versions of
1489 - When using AC_CONFIG_FILES with multiple input files, Automake
1490 generates the first ".in" input file for which a ".am" exists.
1491 (Former versions would try to use only the first input file.)
1493 - lisp_DATA is now allowed. If you are using the empty ELCFILES
1494 idiom to disable byte-compilation of lisp_LISP files, it is
1495 recommended that you switch to using lisp_DATA. Note that
1496 this is not strictly equivalent: lisp_DATA will install elisp
1497 files even if emacs is not installed, while *_LISP do not
1498 install anything unless emacs is found.
1500 - Makefiles will prefer `mkdir -p' over mkinstalldirs if it is
1501 available. This selection is achieved through the Makefile
1502 variable $(mkdir_p) that is set by AM_INIT_AUTOMAKE to either
1503 `mkdir -m 0755 -p --', `$(mkinstalldirs) -m 0755', or
1504 `$(install_sh) -m 0755 -d'.
1508 - Because `mkdir -p' is available on most platforms, and we can use
1509 `install-sh -d' when it is not, the use of the mkinstalldirs
1510 script is being phased out. `automake --add-missing' no longer
1511 installs it, and if you remove mkinstalldirs from your package,
1512 automake will define $(mkinstalldirs) as an alias for $(mkdir_p).
1514 Gettext 0.12.1 still requires mkinstalldirs. Fortunately
1515 gettextize and autopoint will install it when needed. Automake
1516 will continue to define the $(mkinstalldirs) and to distribute
1517 mkinstalldirs when this script is in the source tree.
1519 - AM_PROG_CC_STDC is now empty. The content of this macro was
1520 merged in AC_PROG_CC. If your code uses $am_cv_prog_cc_stdc, you
1521 should adjust it to use $ac_cv_prog_cc_stdc instead. (This
1522 renaming should be safe, even if you have to support several,
1523 versions of Automake, because AC_PROG_CC defines this variable
1524 since Autoconf 2.54.)
1526 - Some users where using the undocumented ACLOCAL_M4_SOURCES
1527 variable to override the aclocal.m4 dependencies computed
1528 (inaccurately) by older versions of Automake. Because Automake
1529 now tracks configure's m4 dependencies accurately (see m4_include
1530 above), the use of ACLOCAL_M4_SOURCES should be considered
1531 obsolete and will be flagged as such when running `automake
1536 - Defining programs conditionally using Automake conditionals no
1537 longer leads to a combinatorial explosion. The following
1538 construct used to be troublesome when used with dozens of
1553 Likewise for _SOURCES, _LDADD, and _LIBADD variables.
1555 - Due to implementation constraints, previous versions of Automake
1556 proscribed multiple conditional definitions of some variables
1566 All _PROGRAMS, _LDADD, and _LIBADD variables were affected.
1567 This restriction has been lifted, and these variables now
1568 support multiple conditional definitions as do other variables.
1570 - Cleanup the definitions of $(distdir) and $(top_distdir).
1571 $(top_distdir) now points to the root of the distribution
1572 directory created during `make dist', as it did in Automake 1.4,
1573 not to the root of the build tree as it did in intervening
1574 versions. Furthermore these two variables are now only defined in
1575 the top level Makefile, and passed to sub-directories when running
1578 - The --no-force option now correctly checks the Makefile.in's
1579 dependencies before deciding not to update it.
1581 - Do not assume that make files are called Makefile in cleaning rules.
1583 - Update .info files in the source tree, not in the build tree. This
1584 is what the GNU Coding Standard recommend. Only Automake 1.7.x
1585 used to update these files in the build tree (previous versions did
1586 it in the source tree too), and it caused several problems, varying
1587 from mere annoyance to portability issues.
1589 - COPYING, COPYING.LIB, and COPYING.LESSER are no longer overwritten
1590 when --add-missing and --force-missing are used. For backward
1591 compatibility --add-missing will continue to install COPYING (in
1592 `gnu' strictness) when none of these three files exist, but this
1593 use is deprecated: you should better choose a license yourself and
1594 install it once for all in your source tree (and in your code
1597 - Fix ylwrap so that it does not overwrite header files that haven't
1598 changed, as the inline rule already does.
1600 - User-defined rules override automake-defined rules for the same
1601 targets, even when rules do not have commands. This is not new
1602 (and was documented), however some of the automake-generated
1603 rules have escaped this principle in former Automake versions.
1604 Rules for the following targets are affected by this fix:
1606 clean, clean-am, dist-all, distclean, distclean-am, dvi, dvi-am,
1607 info, info-am, install-data-am, install-exec-am, install-info,
1608 install-info-am, install-man, installcheck-am, maintainer-clean,
1609 maintainer-clean-am, mostlyclean, mostlyclean-am, pdf, pdf-am,
1610 ps, ps-am, uninstall-am, uninstall-info, uninstall-man
1612 Practically it means that an attempt to supplement the dependencies
1613 of some target, as in
1615 clean: my-clean-rule
1617 will now *silently override* the automake definition of the
1618 rule for this target. Running `automake -Woverride' will diagnose
1619 all such overriding definitions.
1621 It should be noted that almost all these targets support a *-local
1622 variant that is meant to supplement the automake-defined rule
1623 (See node `Extending' in the manual). The above rule should
1626 clean-local: my-clean-rule
1628 These *-local targets have been documented since at least
1629 Automake 1.2, so you should not fear the change if you have
1630 to support multiple automake versions.
1634 - The Automake manual is now distributed under the terms of the GNU FDL.
1636 - Targets dist-gzip, dist-bzip2, dist-tarZ, dist-zip are always defined.
1638 - core dumps are no longer removed by the cleaning rules. There are
1639 at least three reasons for this:
1640 1. These files should not be created by any build step,
1641 so their removal do not fit any of the cleaning rules.
1642 Actually, they may be precious to the developer.
1643 2. If such file is created during a build, then it's clearly a
1644 bug Automake should not hide. Not removing the file will
1645 cause `make distcheck' to complain about its presence.
1646 3. Operating systems have different naming conventions for
1647 core dump files. A core file on one system might be a
1648 completely legitimate data file on another system.
1650 - RUNTESTFLAGS, CTAGSFLAGS, ETAGSFLAGS, JAVACFLAGS are no longer
1651 defined by Automake. This means that any definition in the
1652 environment will be used, unless overridden in the Makefile.am or
1653 on the command line. The old behavior, where these variables were
1654 defined empty in each Makefile, can be obtained by AC_SUBSTing or
1655 AC_ARG_VARing each variable from configure.ac.
1657 - CONFIGURE_DEPENDENCIES and CONFIG_STATUS_DEPENDENCIES are now
1658 documented. (The is not a new feature, these variables have
1659 been there since at least Automake 1.4.)
1661 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1663 Bugs fixed in 1.7.9:
1664 * Fix install-strip to work with nobase_ binaries.
1665 * Fix renaming of #line directives in ylwrap.
1666 * Rebuild with Autoconf 2.59. (1.7.8 was not installable with pdksh.)
1668 Bugs fixed in 1.7.8:
1669 * Remove spurious blank lines in cleaning rules introduced in 1.7.7.
1670 * Fix detection of Debian's install-info, broken since version 1.5.
1671 (Debian bug #213524).
1672 * Honor -module if it appears in AM_LDFLAGS (i.e., relax name checking)
1673 This was only done for libfoo_LDFLAGS and LDFLAGS in previous versions.
1675 Bugs fixed in 1.7.7:
1676 * The implementation of automake's --no-force option is unreliable,
1677 so this option is ignored in this version. A real fix will appear in
1678 Automake 1.8. (Debian Bug #206299)
1679 * AM_PATH_PYTHON: really check the whole list of interpreters if no
1680 argument is given. (PR/399)
1681 * Do not warn about leading `_' in variable names, even with -Wportability.
1682 * Support user redefinitions of TEXINFO_TEX.
1683 * depcomp: support AIX Compiler version 6.
1684 * Fix missing rebuilds during `make dist' with BSD make.
1685 (Could produce tarballs containing out-of-date files.)
1686 * Resurrect multilib support.
1687 * Noteworthy manual updates:
1688 - Extending aclocal: how to write m4 macros that won't trigger warnings
1690 - A Shared Library: Rewrite and split into subsections.
1692 Bugs fixed in 1.7.6:
1693 * Fix depcomp's icc mode for ICC 7.1.
1694 * Diagnose calls to AC_CONFIG_FILES and friends with not enough arguments.
1695 * Fix maintainer-clean's removal of autom4te.cache in VPATH builds.
1696 * Fix AM_PATH_LISPDIR to work with POSIXLY_CORRECT=1.
1697 * Fix the location reported in some diagnostics related to AUTOMAKE_OPTIONS.
1698 * Remove Latin-1 characters from elisp-comp.
1699 * Update the manual's @dircategory to match the Free Software Directory.
1701 Bugs fixed in 1.7.5:
1702 * Update install-sh's license to remove an advertising clause.
1703 (Debian bug #191717)
1704 * Fix a bug introduced in 1.7.4, related to BUILT_SOURCE handling,
1705 that caused invalid Makefile.ins to be generated.
1706 * Make sure AM_MAKE_INCLUDE doesn't fail when a `doit' file exists.
1707 * New FAQ entry: renamed objects.
1709 Bugs fixed in 1.7.4:
1710 * Tweak the TAGS rule to support Exuberant Ctags (in addition to
1711 the Emacs implementation)
1712 * Fix output of aclocal.m4 dependencies in subdirectories.
1713 * Use `mv -f' instead of `mv' in fastdep rules.
1714 * Upgrade mdate-sh to work on OS/2.
1715 * Don't byte-compile elisp files when ELCFILES is set empty.
1716 (this documented feature was broken by 1.7.3)
1717 * Diagnose trailing backslashes on last line of Makefile.am.
1718 * Diagnose whitespace following trailing backslashes.
1719 * Multiple tests are now correctly supported in DEJATOOL. (PR/388)
1720 * Fix rebuilt rules for AC_CONFIG_FILES([Makefile:Makefile.in:Makefile.bot])
1722 * `make install' will build `BUILT_SOURCES' first.
1723 * Minor documentation fixes.
1725 Bugs fixed in 1.7.3:
1726 * Fix stamp files numbering (when using multiple AC_CONFIG_HEADERS).
1727 * Query distutils for `pythondir' and `pythonexecdir', instead of
1728 using an hardcoded path. This should allow builds on 64-bit
1729 distributions that usually use lib64/ instead of lib/.
1730 * AM_PATH_PYTHON will also search for python2.3.
1731 * elisp files are now built all at once instead of one by one. Besides
1732 incurring a speed-up, this is required to support interdependent elisp files.
1733 * Support for DJGPP:
1734 - `make distcheck' will now work in `_inst/' and `_build' instead
1735 of `=inst/' and `=build/'
1736 - use `_dirstamp' when the file-system doesn't support `.dirstamp'
1737 - install/uninstall `*.i[0-9][0-9]'-style info files
1738 - more changes that affect only the Automake package (not its output)
1739 * Fix some incompatibilities with upcoming perl-5.10.
1740 * Properly quote AC_PACKAGE_TARNAME and AC_PACKAGE_VERSION when defining
1741 PACKAGE and VERSION.
1743 - dashmstdout and dashXmstdout modes: don't use `-o /dev/null', this
1744 is troublesome with gcc and Solaris compilers. (PR/385)
1745 - makedepend mode: work with Libtool. (PR/385 too)
1747 * better support for unusual gettext setups, such as multiple po/ directories
1749 - Flag missing po/ and intl/ directories as warnings, not errors.
1750 - Disable these warnings if po/ does not exist.
1751 * Noteworthy manual updates:
1753 - Document how AC_CONFIG_AUX_DIR interacts with missing files.
1755 - Document `AM_YFLAGS = -d'. (PR/382)
1757 Bugs fixed in 1.7.2:
1758 * Fix installation and uninstallation of Info files built in subdirectories.
1759 * Do not run `./configure --with-included-gettext' during `make distcheck'
1760 if AM_GNU_GETTEXT([external]) is used.
1761 * Correctly uninstall renamed man pages.
1762 * Do not strip escaped newline in variables defined in one condition
1763 and augmented in another condition.
1764 * Fix ansi2knr rules for LIBOBJS sources.
1765 * Clean all known Texinfo index files, not only those which appear to
1766 be used, because we cannot know which indexes are used in included files.
1767 (PR/375, Debian Bug #168671)
1768 * Honor only the first @setfilename seen in a Texinfo file.
1769 * Treat "required file X not found" diagnostics as errors (exit status 1).
1770 * Don't complain that a required file is not found when it is a Makefile
1772 * Don't use single suffix inference rules when building `.info'-less
1773 Info files, for the sake of Solaris make.
1774 * The `check' target now depends on `$(BUILT_SOURCES)'. (PR/359)
1775 * Recognize multiple inference rules such as `.a.b .c.d:'. (PR/371)
1776 * Warn about multiple inference rules when -Wportability is used. (PR/372)
1777 * Fix building of deansified files from subdirectories. (PR/370)
1778 * Add missing `fi' in the .c->.obj rules.
1779 * Improve install-sh to work even when names contain spaces or certain
1780 (but not all) shell metachars.
1781 * Fix the following spurious failures in the test suite:
1782 depcomp2.test, gnits2.test, gnits3.test, python3.test, texinfo13.test
1783 * Noteworthy manual updates:
1784 - Augment the section about BUILT_SOURCES.
1785 - Mention that AM_PROG_CC_STDC is a relic that is better avoided today.
1787 Bugs fixed in 1.7.1:
1788 * Honor `ansi2knr' for files built in subdirectories, or using per-targets
1790 * Aclocal should now recognize macro names containing parentheses, e.g.
1791 AC_DEFUN([AC_LANG_PREPROC(Fortran 90)], [...]).
1792 * Erase *.sum and *.log files created by DejaGnu, during `make distclean'.
1794 * Install Python files even if they were built. (PR/369)
1795 * Have stamp-vti dependent upon configure instead of configure.ac, as the
1796 version might not be defined in the latter. (PR/358)
1797 * Reorder arguments passed to a couple of commands, so things works
1798 when POSIXLY_CORRECT=1.
1799 * Fix a regex that can cause Perl to segfault on large input.
1801 * Fix distribution of packages that have some sources defined conditionally,
1802 as in the `Conditional compilation using Automake conditionals' example
1804 * Fix spurious test suite failures on IRIX.
1805 * Don't report a required variable as undefined if it has been
1806 defined conditionally for the "right" conditions.
1807 * Fix cleaning of the /tmp subdirectory used by `make distcheck', in case
1808 `make distcheck' fails.
1809 * Fix distribution of included Makefile fragment, so we don't create
1810 spurious directories in the distribution. (PR/366)
1811 * Don't complain that a target lacks `.$(EXEEXT)' when it has it.
1814 * Autoconf 2.54 is required.
1815 * `aclocal' and `automake' will no longer warn about obsolete
1816 configure macros. This is done by `autoconf -Wobsolete'.
1817 * AM_CONFIG_HEADER, AM_SYS_POSIX_TERMIOS and
1818 AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL are obsolete (although still
1819 supported). You should use AC_CONFIG_HEADERS, AC_SYS_POSIX_TERMIOS,
1820 and AC_HEADER_TIOCGWINSZ instead. `autoupdate' can upgrade
1821 `configure.ac' for you.
1822 * Support for per-program and per-library `_CPPFLAGS'.
1823 * New `ctags' target (builds CTAGS files).
1824 * Support for -Wmumble and -Wno-mumble, where mumble is a warning category
1825 (see `automake --help' or the manual for a list of them).
1826 * Honor the WARNINGS environment variable.
1827 * Omit the call to depcomp when using gcc3: call the compiler directly.
1828 * A new option, std-options, tests that programs support --help and --version
1829 when `make installcheck' is run. This is enabled by --gnits.
1830 * Texinfo rules now support the `ps' and `pdf' targets.
1831 * Info files are now created in the build directory, not the source directory.
1832 * info_TEXINFOS supports files in subdirectories (this requires Texinfo 4.1
1834 * `make distcheck' will enforce DESTDIR support by attempting
1836 * `+=' can be used in conditionals, even if the augmented variable
1837 was defined for another condition.
1838 * Makefile fragments (inserted with `include') are always distributed.
1839 * Use Autoconf's --trace interface to inspect configure.ac and get
1840 a more accurate view of it.
1841 * Add support for extending aclocal's default macro search path
1842 using a `dirlist' file within the aclocal directory.
1843 * automake --output-dir is deprecated.
1844 * The part of the distcheck target that checks whether uninstall actually
1845 removes all installed files has been moved in a separate target,
1846 distuninstallcheck, so it can be overridden easily.
1850 * Support for AM_INIT_GETTEXT([external])
1851 * Bug fixes, including:
1852 - Fix Automake's own `make install' so it works even if `ln' doesn't.
1853 - nobase_ programs and scripts honor --program-transform correctly.
1854 - Erase configure.lineno during `make distclean'.
1855 - Erase YACC and LEX outputs during `make maintainer-clean'.
1858 * Many bug fixes, including:
1859 - Requiring the current version works.
1860 - Fix "$@" portability issues (for Zsh).
1861 - Fix output of dummy dependency files in presence of post-processed
1863 - Don't compute dependencies in background to avoid races with libtool.
1864 - Fix handling of _OBJECTS variables for targets sharing source variables.
1865 - Check dependency mode for Java when AM_PROG_GCJ is used.
1868 * automake --output-dir is deprecated
1869 * Many bug fixes, including:
1870 - Don't choke on AM_LDFLAGS definitions.
1871 - Clean libtool objects from subdirectories.
1872 - Allow configure variables with reserved suffix and unknown prefix
1873 (e.g. AC_SUBST(mumble_LDFLAGS) when 'mumble' is not a target).
1874 - Fix the definition of AUTOMAKE and ACLOCAL in configure.
1877 * Autoconf 2.52 is required.
1878 * automake no longer run libtoolize.
1879 This is the job of autoreconf (from GNU Autoconf).
1880 * `dist' generates all the archive flavors, as did `dist-all'.
1881 * `dist-gzip' generates the Gzip tar file only.
1882 * Combining Automake Makefile conditionals no longer lead to a combinatorial
1883 explosion. Makefile.in's keep a reasonable size.
1884 * AM_FUNC_ERROR_AT_LINE, AM_FUNC_STRTOD, AM_FUNC_OBSTACK, AM_PTRDIFF_T
1885 are no longer shipped, since Autoconf 2.52 provides them (both as AM_
1887 * `#line' of Lex and Yacc files are properly set.
1888 * EXTRA_DIST can contain generated directories.
1889 * Support for dot-less extensions in suffix rules.
1890 * The part of the distcheck target that checks whether distclean actually
1891 cleans all built files has been moved in a separate target, distcleancheck,
1892 so it can be overridden easily.
1893 * `make distcheck' will pass additional options defined in
1894 $(DISTCHECK_CONFIGURE_FLAGS) to configure.
1895 * Fixed CDPATH portability problems, in particular for MacOS X.
1896 * Fixed handling of nobase_ targets.
1897 * Fixed support of implicit rules leading to .lo objects.
1898 * Fixed late inclusion of --add-missing files (e.g. depcomp) in DIST_COMMON
1899 * Added uninstall-hook target
1900 * `AC_INIT AM_INIT_AUTOMAKE(tarname,version)' is an obsolete construct.
1901 You can now use `AC_INIT(pkgname,version) AM_INIT_AUTOMAKE' instead.
1902 (Note that "pkgname" is not "tarname", see the manual for details.)
1903 It is also possible to pass a list of global Automake options as
1904 first argument to this new form of AM_INIT_AUTOMAKE.
1905 * Compiler-based assembler is now called `CCAS'; people expected `AS'
1906 to be a real assembler.
1907 * AM_INIT_AUTOMAKE will set STRIP itself when it needs it. Adding
1908 AC_CHECK_TOOL([STRIP], [strip]) manually is no longer required.
1909 * aclocal and automake are also installed with the version number
1910 appended, and some of the install directory names have changed.
1911 This lets you have multiple versions installed simultaneously.
1912 * Support for parsers and lexers in subdirectories.
1915 * Support for `configure.ac'.
1916 * Support for `else COND', `endif COND' and negated conditions `!COND'.
1917 * `make dist-all' is much faster.
1918 * Allows '@' AC_SUBSTs in macro names.
1919 * Faster AM_INIT_AUTOMAKE (requires update of `missing' script)
1920 * User-side dependency tracking. Developers no longer need GNU make
1922 * Uses DIST_SUBDIRS in some situations when SUBDIRS is conditional
1923 * Most files are correctly handled if they appear in subdirs
1924 For instance, a _DATA file can appear in a subdir
1925 * GNU tar is no longer required for `make dist'
1926 * Added support for `dist_' and `nodist_' prefixes
1927 * Added support for `nobase_' prefix
1928 * Compiled Java support
1929 * Support for per-executable and per-library compilation flags
1933 * Added support for the Fortran 77 programming language.
1934 * Re-indexed the Automake Texinfo manual.
1935 * Added `AM_FOOFLAGS' variable for each compiler invocation;
1936 e.g. AM_CFLAGS can be used in Makefile.am to set C compiler flags
1937 * Support for latest autoconf, including support for objext
1938 * Can now put `.' in SUBDIRS to control build order
1939 * `include' command and `+=' support for macro assignment
1940 * Dependency tracking no long susceptible to deleted header file problem
1941 * Maintainer mode now a conditional. @MAINT@ is now an anachronism.
1946 * Better Cygwin32 support
1947 * Support for suffix rules with _SOURCES variables
1948 * New options `readme-alpha' and `check-news'; Gnits mode sets these
1949 * @LEXLIB@ no longer required when lex source seen
1950 Lex support in `missing', and new lex macro. Update your missing script.
1951 * Built-in support for assembly
1952 * aclocal gives error if `AM_' macro not found
1953 * Passed YFLAGS, not YACCFLAGS, to yacc
1954 * AM_PROG_CC_STDC does not have to come before AC_PROG_CPP
1955 * Dependencies computed as a side effect of compilation
1956 * Preliminary support for Java
1957 * DESTDIR support at "make install" time
1958 * Improved ansi2knr support; you must use the latest ansi2knr.c (included)
1962 * Better DejaGnu support
1963 * Added no-installinfo option
1964 * Added Emacs Lisp support
1965 * Added --no-force option
1966 * Included `aclocal' program
1967 * Automake will now generate rules to regenerate aclocal.m4, if appropriate
1968 * Now uses `AM_' macro names everywhere
1969 * ansi2knr option can have directory prefix (eg `../lib/ansi2knr')
1970 ansi2knr now works correctly on K&R sources
1971 * Better C++, yacc, lex support
1972 * Will compute _DEPENDENCIES variables automatically if not supplied
1973 * Will interpolate $(...) and ${...} when examining contents of a variable
1974 * .deps files now in build directory, not source directory; dependency
1975 handling generally rewritten
1976 * DATA, MANS and BUILT_SOURCES no longer included in distribution
1977 * can now put config.h into a subdir
1978 * Added dist-all target
1979 * Support for install-info program (see texinfo 3.9)
1980 * Support for "yacc -d"
1981 * configure substitutions are automatically discovered and included
1982 in generated Makefile.in
1983 * Special --cygnus mode
1984 * OMIT_DEPENDENCIES can now hold list of dependencies to be omitted
1985 when making distribution. Some dependencies are auto-ignored.
1986 * Changed how libraries are specified in _LIBRARIES variable
1987 * Full libtool support, from Gord Matzigkeit
1988 * No longer have to explicitly touch stamp-h when using AC_CONFIG_HEADER;
1989 AM_CONFIG_HEADER handles it automatically
1990 * Texinfo output files no longer need .info extension
1991 * Added `missing' support
1993 * Conditionals in Makefile.am, from Ian Taylor
1997 * distcheck target runs install and installcheck targets
1998 * Added preliminary support for DejaGnu.
2003 * More libtool fixes from Gord Matzigkeit; libtool support is still
2005 * Added support for jm_MAINTAINER_MODE
2007 * New "distcheck" target
2011 * mkinstalldirs and mdate-sh now appear in directory specified by
2013 * Removed DIST_SUBDIRS, DIST_OTHER
2014 * AC_ARG_PROGRAM only required when an actual program exists
2015 * dist-hook target now run before distribution packaged up; idea from
2016 Dieter Baron. Other hooks exist, too.
2017 * Preliminary (unfinished) support for libtool
2018 * Added short option names.
2019 * Better "dist" support when gluing together multiple packages
2023 * Documentation updates (many from François Pinard)
2024 * strictness `normal' now renamed to `foreign'
2025 * Renamed --install-missing to --add-missing
2026 * Now handles AC_CONFIG_AUX_DIR
2027 * Now handles TESTS macro
2028 * DIST_OTHER renamed to EXTRA_DIST
2029 * DIST_SUBDIRS is deprecated
2030 * @ALLOCA@ and @LIBOBJS@ now work in _LDADD variables
2031 * Better error messages in many cases
2032 * Program names are canonicalized
2033 * Added "check" prefix; from Gord Matzigkeit
2037 * configure.in scanner knows about AC_PATH_XTRA, AC_OUTPUT ":" syntax
2038 * Beginnings of a test suite
2039 * Automatically adds -I options for $(srcdir), ".", and path to config.h
2040 * Doesn't print anything when running
2041 * Beginnings of MAINT_CHARSET support
2042 * Can specify version in AUTOMAKE_OPTIONS
2043 * Most errors recognizable by Emacs' M-x next-error
2044 * Added --verbose option
2045 * All "primary" variables now obsolete; use EXTRA_PRIMARY to supply
2046 configure-generated names
2047 * Required macros now distributed in aclocal.m4
2049 * --strictness=gnu is default
2053 * More sophisticated configure.in scanning; now understands ALLOCA and
2054 LIBOBJS directly, handles AC_CONFIG_HEADER more precisely, etc.
2055 * TEXINFOS and MANS now obsolete; use info_TEXINFOS and man_MANS instead.
2056 * CONFIG_HEADER variable now obsolete
2057 * Can handle multiple Texinfo sources
2058 * Allow hierarchies deeper than 2. From Gord Matzigkeit.
2059 * HEADERS variable no longer needed; now can put .h files directly into
2060 foo_SOURCES variable.
2061 * Automake automatically rebuilds files listed in AC_OUTPUT. The
2062 corresponding ".in" files are included in the distribution.
2065 * Added --gnu and --gnits options
2066 * More standards checking
2068 * Cleaned up 'dist' targets
2069 * Added AUTOMAKE_OPTIONS variable and several options
2070 * Now scans configure.in to get some information (preliminary)
2073 * Works with Perl 4 again
2076 * Added --install-missing option.
2077 * Pretty-prints generated macros and rules
2078 * Comments in Makefile.am are placed more intelligently in Makefile.in
2079 * Generates .PHONY target
2080 * Rule or macro in Makefile.am now overrides contents of Automake file
2081 * Substantial cleanups from François Pinard
2085 * Works with Perl 4 again.
2088 * New uniform naming scheme.
2089 * --strictness option
2091 * '.c' files corresponding to '.y' or '.l' files are automatically
2093 * Many bug fixes and cleanups
2096 * Allow objects to be conditionally included in libraries via lib_LIBADD.
2099 * Bug fixes in 'clean' code.
2100 * Now generates 'installdirs' target.
2101 * man page installation reworked.
2102 * 'make dist' no longer re-creates all Makefile.in's.
2105 * Reimplemented in Perl
2106 * Added --amdir option (for debugging)
2107 * Texinfo support cleaned up.
2108 * Automatic de-ANSI-fication cleaned up.
2109 * Cleaned up 'clean' targets.
2112 * Automatic dependency tracking
2113 * More documentation
2114 * New variables DATA and PACKAGEDATA
2115 * SCRIPTS installed using $(INSTALL_SCRIPT)
2116 * No longer uses double-colon rules
2118 * Changes in advance of internationalization
2122 Copyright (C) 1995-2012 Free Software Foundation, Inc.
2124 This program is free software; you can redistribute it and/or modify
2125 it under the terms of the GNU General Public License as published by
2126 the Free Software Foundation; either version 2, or (at your option)
2129 This program is distributed in the hope that it will be useful,
2130 but WITHOUT ANY WARRANTY; without even the implied warranty of
2131 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2132 GNU General Public License for more details.
2134 You should have received a copy of the GNU General Public License
2135 along with this program. If not, see <http://www.gnu.org/licenses/>.