1 * WARNING: New versioning scheme for Automake.
3 - Starting with this version onward, Automake will use an update and
4 more rational versioning scheme, one that will allow users to know
5 which kind of changes can be expected from a new version, based on
8 + Micro versions (e.g., 1.13.3, 2.0.1, 3.2.8) will introduce only
9 documentation updates and bug and regression fixes; they will
10 not introduce new features, nor any backward-incompatibility (any
11 such incompatibility would be considered a bug, to be fixed with
12 a further micro release).
14 + Minor versions (e.g., 1.14, 2.1) can introduce new backward
15 compatible features; the only backward-incompatibilities allowed
16 in such a release are new *non-fatal* deprecations and warnings,
17 and possibly fixes for old or non-trivial bugs (or even inefficient
18 behaviours) that could unfortunately have been seen, and used, by
19 some developers as "corner case features". Possible disruptions
20 caused by this kind of fixes should hopefully be quite rare.
22 + Major versions (now expected to be released every 18 or 24 months,
23 and not more often) can introduce new big features (possibly with
24 rough edges and not-fully-stabilized APIs), removal of deprecated
25 features, backward-incompatible changes of behaviour, and possibly
26 major refactorings (that, while ideally transparent to the user,
27 could introduce new bugs). Incompatibilities should however not
28 be introduced gratuitously and abruptly; a proper deprecation path
29 should be duly implemented in the preceding minor releases.
31 - According to this new scheme, the next major version of Automake
32 (the one that has until now been labelled as '1.14') will actually
33 become "Automake 2.0". Automake 1.14 will be the next minor version,
34 which will introduce new features, deprecations and bug fixes, but
35 no real backward incompatibility.
37 - See discussion about automake bug#13578 for more details and
38 background: <http://debbugs.gnu.org/cgi/bugreport.cgi?bug=13578>
40 * WARNING: Future backward-incompatibilities!
42 - Automake 2.0 will require Autoconf 2.70 or later (which is still
43 unreleased at the moment of writing, but is planned to be released
44 before Automake 2.0 is).
46 - Automake 2.0 will drop support for the long-deprecated 'configure.in'
47 name for the Autoconf input file. You are advised to start using the
48 recommended name 'configure.ac' instead, ASAP.
50 - The ACLOCAL_AMFLAGS special make variable will be fully deprecated
51 in Automake 2.0 (where it will raise warnings in the "obsolete"
52 category). You are advised to start relying on the new Automake
53 support for AC_CONFIG_MACRO_DIRS instead (which was introduced in
56 - Automake 2.0 will remove support for automatic dependency tracking
57 with the SGI C/C++ compilers on IRIX. The SGI depmode has been
58 reported broken "in the wild" already, and we don't think investing
59 time in debugging and fixing is worthwhile, especially considering
60 that SGI has last updated those compilers in 2006, and is expected
61 to retire support for them in December 2013:
62 <http://www.sgi.com/services/support/irix_mips_support.html>
64 - Future versions of Automake might remove support for MS-DOS and
65 Windows 95/98/ME (support for them was offered by relying on the
66 DJGPP project). Note however that both Cygwin and MSYS/MinGW on
67 modern Windows versions will continue to be fully supported.
69 - Automake-provided scripts and makefile recipes might (finally!)
70 start assuming a POSIX shell in Automake 2.0.
72 - Starting from Automake 2.0, third-party m4 files located in the
73 system-wide aclocal directory, as well as in any directory listed
74 in the ACLOCAL_PATH environment variable, will take precedence
75 over "built-in" Automake macros. For example (assuming Automake
76 is installed in the /usr/local hierarchy), a definition of the
77 AM_PROG_VALAC macro found in '/usr/local/share/aclocal/my-vala.m4'
78 should take precedence over the same-named automake-provided macro
79 (defined in '/usr/local/share/aclocal-2.0/vala.m4').
81 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
87 - Byte-compilation of Emacs lisp files could fail spuriously on Solaris,
88 when /bin/ksh or /usr/xpg4/bin/sh were used as shell.
92 - The test cases no longer have the executable bit set. This should
93 make it clear that they are not meant to be run directly; as
94 explained in t/README, the can only be run through the custom
95 'runtest' script, or by a "make check" invocation.
97 - The testsuite has seen the introduction of a new helper function
98 'run_make', and several related changes. These serve a two-fold
101 1. Removing brittleness due to the use of "make -e" in test cases.
103 2. Seamlessly allowing the use of parallel make ("make -j...") in
104 the test cases, even where redirection of make output is involved
105 (see automake bug#11413 for a description of the subtle issues in
108 - Some other minor, miscellaneous changes and fixlets.
110 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
114 * Obsolescent features:
116 - Use of suffix-less info files (that can be specified through the
117 '@setfilename' macro in Texinfo input files) is discouraged, and
118 its use will raise warnings in the 'obsolete' category.
120 - Use of Texinfo input files with '.txi' or '.texinfo' extensions
121 is discouraged, and its use will raise warnings in the 'obsolete'
122 category. You are advised to simply use the '.texi' extension
125 * Documentation fixes:
127 - The long-deprecated but still supported two-arguments invocation form
128 of AM_INIT_AUTOMAKE is documented once again. This seems the sanest
129 thing to do, given that support for such an usage might need to remain
130 in place for a unspecified amount of time in order to cater for people
131 who want to define the version number for their package dynamically at
132 configure runtime (unfortunately, Autoconf does not yet support this
133 scenario, so we cannot delegate the work to it).
135 - The serial testsuite harness is no longer reported as "deprecated",
136 but as "discouraged". We have no plan to remove it, not to make its
137 use cause runtime warnings.
139 - The parallel testsuite is no longer reported as "experimental"; it
140 is well tested, and should be stable now.
142 - The 'shar' and 'tarZ' distribution formats and the 'dist-shar' and
143 'dist-tarZ' options are obsolescent, and their use is deprecated
144 in the documentation.
146 - Other minor miscellaneous fixes and improvements; in particular,
147 some improvements in cross-references.
151 - When the 'ustar' option is used, the generated configure script no
152 longer risks hanging during the tests for the availability of the
153 'pax' utility, even if the user running configure has a UID or GID
154 that requires more than 21 bits to be represented.
155 See automake bug#8343 and bug#13588.
157 - The obsolete macros AM_CONFIG_HEADER or AM_PROG_CC_STDC work once
158 again, as they did in Automake 1.12.x (albeit printing runtime
159 warnings in the 'obsolete' category). Removing them has turned
160 out to be a very bad idea, because it complicated distro packing
161 enormously. Making them issue fatal warnings, as we did in
162 Automake 1.13, has turned out to be a similarly very bad idea,
163 for exactly the same reason.
165 - aclocal will no longer error out if the first local m4 directory
166 (as specified by the '-I' option or the 'AC_CONFIG_MACRO_DIRS' or
167 'AC_CONFIG_MACRO_DIR' macros) doesn't exist; it will merely report
168 a warning in the 'unsupported' category. This is done to support
169 some pre-existing real-world usages. See automake bug#13514.
171 - aclocal will no longer consider directories for extra m4 files more
172 than once, even if they are specified multiple times. This ensures
173 packages that specify both
175 AC_CONFIG_MACRO_DIR([m4]) in configure.ac
176 ACLOCAL_AMFLAGS = -I m4 in Makefile.am
178 will work correctly, even when the 'm4' directory contains no
179 package-specific files, but is used only to install third-party
180 m4 files (as can happen with e.g., "libtoolize --install").
181 See automake bug#13514.
183 - Analysis of make flags in Automake-generated rules has been made more
184 robust, and more future-proof. For example, in presence of make that
185 (like '-I') take an argument, the characters in said argument will no
186 longer be spuriously considered as a set of additional make options.
187 In particular, automake-generated rules will no longer spuriously
188 believe to be running in dry mode ("make -n") if run with an invocation
189 like "make -I noob"; nor will they believe to be running in keep-going
190 mode ("make -k") if run with an invocation like "make -I kool"
191 (automake bug#12554).
193 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
199 - Use of the obsolete macros AM_CONFIG_HEADER or AM_PROG_CC_STDC now
200 causes a clear and helpful error message, instead of obscure ones
201 (issue introduced in Automake 1.13).
203 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
209 - ylwrap renames properly header guards in generated header files
210 (*.h), instead of leaving Y_TAB_H.
212 - ylwrap now also converts header guards in implementation files
213 (*.c). Because ylwrap failed to rename properly #include in the
214 implementation files, current versions of Bison (e.g., 2.7)
215 duplicate the generated header file in the implementation file.
216 The header guard then protects the implementation file from
217 duplicate definitions from the header file.
219 * Version requirements:
221 - Autoconf 2.65 or greater is now required.
223 - The rules to build PDF and DVI output from Texinfo input now
224 require Texinfo 4.9 or later.
228 - Support for the "Cygnus-style" trees (once enabled by the 'cygnus'
229 option) has been removed. See discussion about automake bug#11034
230 for more background: <http://debbugs.gnu.org/11034>.
232 - The deprecated aclocal option '--acdir' has been removed. You
233 should use the options '--automake-acdir' and '--system-acdir'
234 instead (which have been introduced in Automake 1.11.2).
236 - The following long-obsolete m4 macros have been removed:
238 AM_PROG_CC_STDC: superseded by AC_PROG_CC since October 2002
239 fp_PROG_CC_STDC: broken alias for AM_PROG_CC_STDC
240 fp_WITH_DMALLOC: old alias for AM_WITH_DMALLOC
241 AM_CONFIG_HEADER: superseded by AC_CONFIG_HEADERS since July 2002
242 ud_PATH_LISPDIR: old alias for AM_PATH_LISPDIR
243 jm_MAINTAINER_MODE: old alias for AM_MAINTAINER_MODE
244 ud_GNU_GETTEXT: old alias for AM_GNU_GETTEXT
245 gm_PROG_LIBTOOL: old alias for AC_PROG_LIBTOOL
246 fp_C_PROTOTYPES: old alias for AM_C_PROTOTYPES (which was part
247 of the now-removed automatic de-ANSI-fication
250 - All the "old alias" macros in 'm4/obsolete.m4' have been removed.
252 - Use of the long-deprecated two- and three-arguments invocation forms
253 of the AM_INIT_AUTOMAKE is no longer documented. It's still supported
254 though (albeit with a warning in the 'obsolete' category), to cater
255 for people who want to define the version number for their package
256 dynamically (e.g., from the current VCS revision). We'll have to
257 continue this support until Autoconf itself is fixed to allow better
258 support for such dynamic version numbers.
260 * Elisp byte-compilation:
262 - The byte compilation of '.el' files into '.elc' files is now done
263 with a suffix rule. This has simplified the compilation process, and
264 more importantly made it less brittle. The downside is that emacs is
265 now invoked once for each '.el' files, which cause some noticeable
266 slowdowns. These should however be mitigated on multicore machines
267 (which are becoming the norm today) if concurrent make ("make -j")
270 - Elisp files placed in a subdirectory are now byte-compiled to '.elc'
271 files in the same subdirectory; for example, byte-compiling of file
272 'sub/foo.el' file will result in 'sub/foo.elc' rather than in
273 'foo.elc'. This behaviour is backward-incompatible with older
274 Automake versions, but it is more natural and more sane. See also
277 - The Emacs invocation performing byte-compilation of '.el' files honors
278 the $(AM_ELCFLAGS) and $(ELCFLAGS) variables; as typical, the former
279 one is developer-reserved and the latter one user-reserved.
281 - The 'elisp-comp' script, once provided by Automake, has been rendered
282 obsoleted by the just-described changes, and thus removed.
284 * Changes to Automake-generated testsuite harnesses:
286 - The parallel testsuite harness (previously only enabled by the
287 'parallel-tests' option) is the default one; the older serial
288 testsuite harness will still be available through the use of the
289 'serial-tests' option (introduced in Automake 1.12).
291 - The 'color-tests' option is now unconditionally activated by default.
292 In particular, this means that testsuite output is now colorized by
293 default if the attached terminal seems to support ANSI escapes, and
294 that the user can force output colorization by setting the variable
295 AM_COLOR_TESTS to "always". The 'color-tests' is still recognized
296 for backward-compatibility, although it's a handled as a no-op now.
298 * Silent rules support:
300 - Support for silent rules is now always active in Automake-generated
301 Makefiles. So, although the verbose output is still the default,
302 the user can now always use "./configure --enable-silent-rules" or
303 "make V=0" to enable quieter output in the package he's building.
305 - The 'silent-rules' option has now become a no-op, preserved for
306 backward-compatibility only. In particular, its use no longer
307 disables the warnings in the 'portability-recursive' category.
311 - The rules to build PDF and DVI files from Texinfo input now require
312 Texinfo 4.9 or later.
314 - The rules to build PDF and DVI files from Texinfo input now use the
315 '--build-dir' option, to keep the auxiliary files used by texi2dvi
316 and texi2pdf around without cluttering the build directory, and to
317 make it possible to run the "dvi" and "pdf" recipes in parallel.
319 * Automatic remake rules and 'missing' script:
321 - The 'missing' script no longer tries to update the timestamp of
322 out-of-date files that require a maintainer-specific tool to be
323 remade, in case the user lacks such a tool (or has a too-old version
324 of it). It just gives a useful warning, and in some cases also a
325 tip about how to obtain such a tool.
327 - The missing script has thus become useless as a (poor) way to work
328 around the sketched-timestamps issues that can happen for projects
329 that keep generated files committed in their VCS repository. Such
330 projects are now encouraged to write a custom "fix-timestamps.sh"
331 script to avoid such issues; a simple example is provided in the
332 "CVS and generated files" chapter of the automake manual.
336 - The user can now define his own recursive targets that recurse
337 in the directories specified in $(SUBDIRS). This can be done by
338 specifying the name of such targets in invocations of the new
339 'AM_EXTRA_RECURSIVE_TARGETS' m4 macro.
343 - Any failure in the recipe of the "tags", "ctags", "cscope" or
344 "cscopelist" targets in a subdirectory is now propagated to the
345 top-level make invocation.
347 - Tags are correctly computed also for files in _SOURCES variables that
348 only list files with non-standard suffixes (see automake bug#12372).
350 * Improvements to aclocal and related rebuilds rules:
352 - Autoconf-provided macros AC_CONFIG_MACRO_DIR and AC_CONFIG_MACRO_DIRS
353 are now traced by aclocal, and can be used to declare the local m4
354 include directories. Formerly, one had to specify it with an explicit
355 '-I' option to the 'aclocal' invocation.
357 - The special make variable ACLOCAL_AMFLAGS is deprecated; future
358 Automake versions will warn about its use, and later version will
359 remove support for it altogether.
361 * The depcomp script:
363 - Dropped support for libtool 1.4.
365 - Various internal refactorings. They should cause no visible change,
366 but the chance for regression is there anyway, so please report any
367 unexpected or suspicious behaviour.
369 - Support for pre-8.0 versions of the Intel C Compiler has been dropped.
370 This should cause no problem, since icc 8.0 has been released in
371 December 2003 -- almost nine years ago.
373 - Support for tcc (the Tiny C Compiler) has been improved, and is now
374 handled through a dedicated 'tcc' mode.
378 - ylwrap generates header guards with a single '_' for series of non
379 alphabetic characters, instead of several. This is what Bison >=
382 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
384 Bugs fixed in 1.12.6:
386 * Python-related bugs:
388 - The default installation location for python modules has been improved
389 for Python 3 on Debian and Ubuntu systems, changing from:
391 ${prefix}/lib/python3/dist-packages
395 ${prefix}/lib/python3.x/site-packages
397 This change should ensure modules installed using the default ${prefix}
398 "/usr/local" are found by default by system python 3.x installations.
399 See automake bug#10227.
401 - Python byte-compilation supports the new layout mandated by PEP-3147,
402 with its __pycache__ directory (automake bug#8847).
404 * Build system issues:
406 - The maintainer rebuild rules for Makefiles and aclocal.m4 in
407 Automake's own build system works correctly again (bug introduced
412 - The Vala-related tests has been changed to adjust to the removal of
413 the 'posix' profile in the valac compiler. See automake bug#12934
416 - Some spurious testsuite failures related to older tools and systems
419 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
425 - The AM_PROG_VALAC macro has been enhanced to takes two further
426 optional arguments; it's signature now being
428 AM_PROG_VALAC([MINIMUM-VERSION], [ACTION-IF-FOUND],
429 [ACTION-IF-NOT-FOUND])
431 - By default, AM_PROG_VALAC no longer aborts the configure invocation
432 if the Vala compiler found is too old, but simply prints a warning
433 messages (as it did when the Vala compiler was not found). This
434 should avoid unnecessary difficulties for end users that just want
435 to compile the unmodified, distributed Vala-generated C sources,
436 but happens to have an old Vala compiler in their PATH. This fixes
439 - If no proper Vala compiler is found at configure runtime, AM_PROG_VALAC
440 will set the AC_SUBST'd variable 'VALAC' to 'valac' rather than to ':'.
441 This is a better default, because with it a triggered makefile rule
442 invoking a Vala compilation will clearly fail with an informative error
443 message like "valac: command not found", rather than silently, with
444 the error possibly going unnoticed or triggering harder-to-diagnose
445 fallout failures in later steps.
447 * Miscellaneous changes:
449 - automake and aclocal no longer honours the 'perllibdir' environment
450 variable. That had always been intended only as an hack required in
451 the testsuite, not meant for any use beyond that.
453 Bugs fixed in 1.12.5:
455 * Long-standing bugs:
457 - Automake no longer generates spurious remake rules invoking autoheader
458 to regenerate the template corresponding to header files specified after
459 the first one in AC_CONFIG_HEADERS (automake bug#12495).
461 - When wrapping Microsoft tools, the 'compile' script falls back to
462 finding classic 'libname.a' style libraries when 'name.lib' and
463 'name.dll.lib' aren't available.
465 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
469 * Warnings and deprecations:
471 - Warnings in the 'obsolete' category are enabled by default both in
472 automake and aclocal.
474 * Miscellaneous changes:
476 - Some testsuite weaknesses and spurious failures have been fixed.
478 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
482 * Miscellaneous changes:
484 - The '.m4' files provided by Automake no longer define serial numbers.
485 This should cause no difference in the behaviour of aclocal though.
487 - Some testsuite weaknesses and spurious failures have been fixed.
489 - There is initial support for automatic dependency tracking with the
490 Portland Group C/C++ compilers, thanks to the new new depmode 'pgcc'.
492 Bugs fixed in 1.12.3:
494 * Long-standing bugs:
496 - Instead of renaming only self-references of files (typically for
497 #lines), ylwrap now also renames references to the other generated
498 files. This fixes support for GLR and C++ parsers from Bison (PR
499 automake/491 and automake bug#7648): 'parser.c' now properly
500 #includes 'parser.h' instead of 'y.tab.h'.
502 - Generated files unknown to ylwrap are now preserved. This fixes
503 C++ support for Bison (automake bug#7648): location.hh and the
504 like are no longer discarded.
506 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
510 * Warnings and deprecations:
512 - Automake now issues a warning (in the 'portability' category) if
513 'configure.in' is used instead of 'configure.ac' as the Autoconf
514 input file. Such a warning will also be present in the next
515 Autoconf version (2.70).
519 - Recursive cleaning rules descends into the $(SUBDIRS) in the natural
520 order (as done by the other recursive rules), rather than in the
521 inverse order. They used to do that in order to work a round a
522 limitation in an older implementation of the automatic dependency
523 tracking support, but that limitation had been lifted years ago
524 already, when the automatic dependency tracking based on side-effects
525 of compilation had been introduced.
527 - Cleaning rules for compiled objects (both "plain" and libtool) work
528 better when subdir objects are involved, not triggering a distinct
529 'rm' invocation for each such object. They do so by removing *any*
530 compiled object file that is in the same directory of a subdir
531 object. See automake bug#10697.
533 * Silent rules support:
535 - A new predefined $(AM_V_P) make variable is provided; it expands
536 to a shell conditional that can be used in recipes to know whether
537 make is being run in silent or verbose mode.
539 Bugs fixed in 1.12.2:
541 * SECURITY VULNERABILITIES!
543 - The 'distcheck' recipe no longer grants temporary world-write
544 permissions on the extracted distdir. Even if such rights were
545 only granted for a vanishingly small time window, the implied
546 race condition proved to be enough to allow a local attacker
547 to run arbitrary code with the privileges of the user running
548 "make distcheck". This is CVE-2012-3386.
550 * Long-standing bugs:
552 - The "recheck" targets behaves better in the face of build failures
553 related to previously failed tests. For example, if a test is a
554 compiled program that must be rerun by "make recheck", and its
555 compilation fails, it will still be rerun by further "make recheck"
556 invocations. See automake bug#11791.
558 * Bugs introduced by 1.12.1:
560 - Automake provides once again the '$(mkdir_p)' make variable and the
561 '@mkdir_p@' substitution (both as simple aliases for '$(MKDIR_P)'),
562 for better backward-compatibility.
564 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
568 * New supported languages:
570 - Support for Objective C++ has been added; it should work similarly to
571 the support for Objective C.
573 * Deprecated obsolescent features:
575 - Use of the long-deprecated two- and three-arguments invocation forms
576 of the AM_INIT_AUTOMAKE macro now elicits a warning in the 'obsolete'
577 category. Starting from some future major Automake release (likely
578 post-1.13), such usages will no longer be allowed.
580 - Support for the "Cygnus-style" trees (enabled by the 'cygnus' option) is
581 now deprecated (its use triggers a warning in the 'obsolete' category).
582 It will be removed in the next major Automake release (1.13).
584 - The long-obsolete (since 1.10) automake-provided $(mkdir_p) make
585 variable, @mkdir_p@ configure-time substitution and AM_PROG_MKDIR
586 m4 macro are deprecated, eliciting a warning in the 'obsolete'
589 * Miscellaneous changes:
591 - The Automake test cases now require a proper POSIX-conforming shell.
592 Older non-POSIX Bourne shells (like Solaris 10 /bin/sh) will no longer
593 be accepted. In most cases, the user shouldn't have to specify such
594 POSIX shell explicitly, since it will be looked up at configure time.
595 Still, when this lookup fails, or when the user wants to override its
596 conclusion, the variable 'AM_TEST_RUNNER_SHELL' can be used (pointing
597 to the shell that will be used to run the Automake test cases).
599 Bugs fixed in 1.12.1:
601 * Bugs introduced by 1.12:
603 - Several weaknesses in Automake's own build system and test suite
606 * Bugs introduced by 1.11.3:
608 - When given non-option arguments, aclocal rejects them, instead of
609 silently ignoring them.
611 * Long-standing bugs:
613 - When the 'color-tests' option is in use, forcing of colored testsuite
614 output through "AM_COLOR_TESTS=always" works even if the terminal is
615 a non-ANSI one, i.e., if the TERM environment variable has a value of
618 - Several inefficiencies and poor performances in the implementation
619 of the parallel-tests 'check' and 'recheck' targets have been fixed.
621 - The post-processing of output "#line" directives done the ylwrap
622 script is more faithful w.r.t. files in a subdirectory; for example,
623 if the processed file is "src/grammar.y", ylwrap will correctly
624 produce directives like:
625 #line 7 "src/grammar.y"
630 * Bugs with new Perl versions:
632 - Aclocal works correctly with perl 5.16.0 (automake bug#11543).
634 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
638 * Obsolete features removed:
640 - The never documented nor truly used script 'acinstall' has been
643 - Support for automatic de-ANSI-fication has been removed.
645 - The support for the "obscure" multilib feature has been removed
646 from Automake core (but remains available in the 'contrib/'
647 directory of the Automake distribution).
649 - Support for ".log -> .html" conversion and the check-html and
650 recheck-html targets has been removed from Automake core (but
651 remains available in the 'contrib/' directory of the Automake
654 - The deprecated 'lzma' compression format for distribution archives
655 has been removed, in favor of 'xz' and 'lzip'.
657 - The obsolete AM_WITH_REGEX macro has been removed.
659 - The long-deprecated options '--output-dir', '--Werror' and
660 '--Wno-error' have been removed.
662 - The chapter on the history of Automake has been moved out of the
663 reference manual, into a new dedicated Texinfo file.
667 - New 'cscope' target to build a cscope database for the source tree.
669 * Changes to Automake-generated testsuite harnesses:
671 - The new automake option 'serial-tests' has been introduced. It can
672 be used to explicitly instruct automake to use the older serial
673 testsuite harness. This is still the default at the moment, but it
674 might change in future versions.
676 - The 'recheck' target (provided by the parallel testsuite harness) now
677 depends on the 'all' target. This allows for a better user-experience
678 in test-driven development. See automake bug#11252.
680 - Test scripts that exit with status 99 to signal an "hard error" (e.g.,
681 and unexpected or internal error, or a failure to set up the test case
682 scenario) have their outcome reported as an 'ERROR' now. Previous
683 versions of automake reported such an outcome as a 'FAIL' (the only
684 difference with normal failures being that hard errors were counted
685 as failures even when the test originating them was listed in
688 - The testsuite summary displayed by the parallel-test harness has a
689 completely new format, that always list the numbers of passed, failed,
690 xfailed, xpassed, skipped and errored tests, even when these numbers
691 are zero (but using smart coloring when the color-tests option is in
694 - The default testsuite driver offered by the 'parallel-tests' option is
695 now implemented (partly at least) with the help of automake-provided
696 auxiliary scripts (e.g., 'test-driver'), instead of relying entirely
697 on code in the generated Makefile.in.
698 This has two noteworthy implications. The first one is that projects
699 using the 'parallel-tests' option should now either run automake with
700 the '--add-missing' option, or manually copy the 'test-driver' script
701 into their tree. The second, and more important, implication is that
702 now, when the 'parallel-tests' option is in use, TESTS_ENVIRONMENT can
703 no longer be used to define a test runner, and the command specified
704 in LOG_COMPILER (and <ext>_LOG_COMPILER) must be a *real* executable
705 program or script. For example, this is still a valid usage (albeit
708 TESTS_ENVIRONMENT = \
709 if test -n '$(STRICT_TESTS)'; then \
710 maybe_errexit='-e'; \
714 LOG_COMPILER = $(SHELL) $$maybe_errexit
716 OTOH, this is no longer a valid usage:
718 TESTS_ENVIRONMENT = \
719 $(SHELL) `test -n '$(STRICT_TESTS_CHECKING)' && echo ' -e'`
723 TESTS_ENVIRONMENT = \
724 run_with_perl_or_shell () \
726 if grep -q '^#!.*perl' $$1; then
732 LOG_COMPILER = run_with_perl_or_shell
734 - The package authors can now use customary testsuite drivers within
735 the framework provided by the 'parallel-tests' testsuite harness.
736 Consistently with the existing syntax, this can be done by defining
737 special makefile variables 'LOG_DRIVER' and '<ext>_LOG_DRIVER'.
739 - A new developer-reserved variable 'AM_TESTS_FD_REDIRECT' can be used
740 to redirect/define file descriptors used by the test scripts.
742 - The parallel-tests harness generates now, in addition the '.log' files
743 holding the output produced by the test scripts, a new set of '.trs'
744 files, holding "metadata" derived by the execution of the test scripts;
745 among such metadata are the outcomes of the test cases run by a script.
747 - Initial and still experimental support for the TAP test protocol is
750 * Changes to Yacc and Lex support:
752 - C source and header files derived from non-distributed Yacc and/or
753 Lex sources are now removed by a simple "make clean" (while they were
754 previously removed only by "make maintainer-clean").
756 - Slightly backward-incompatible change, relevant only for use of Yacc
757 with C++: the extensions of the header files produced by the Yacc
758 rules are now modelled after the extension of the corresponding
759 sources. For example, yacc files named "foo.y++" and "bar.yy" will
760 produce header files named "foo.h++" and "bar.hh" respectively, where
761 they would have previously produced header files named simply "foo.h"
762 and "bar.h". This change offers better compatibility with 'bison -o'.
764 * Miscellaneous changes:
766 - The AM_PROG_VALAC macro now causes configure to exit with status 77,
767 rather than 1, if the vala compiler found is too old.
769 - The build system of Automake itself now avoids the use of make
770 recursion as much as possible.
772 - Automake now prefers to quote 'like this' or "like this", rather
773 than `like this', in diagnostic message and generated Makefiles,
774 to accommodate the new GNU Coding Standards recommendations.
776 - Automake has a new option '--print-libdir' that prints the path of the
777 directory containing the Automake-provided scripts and data files.
779 - The 'dist' and 'dist-all' targets now can run compressors in parallel.
781 - The rules to create pdf, dvi and ps output from Texinfo files now
782 works better with modern 'texi2dvi' script, by explicitly passing
783 it the '--clean' option to ensure stray auxiliary files are not
784 left to clutter the build directory.
786 - Automake can now generate silenced rules for texinfo outputs.
788 - Some auxiliary files that are automatically distributed by Automake
789 (e.g., 'install-sh', or the 'depcomp' script for packages compiling
790 C sources) might now be listed in the DIST_COMMON variable in many
791 Makefile.in files, rather than in the top-level one.
793 - Messages of types warning or error from 'automake' and 'aclocal'
794 are now prefixed with the respective type, and presence of -Werror
797 - Automake's early configure-time sanity check now tries to avoid
798 sleeping for a second, which slowed down cached configure runs
799 noticeably. In that case, it will check back at the end of the
800 configure script to ensure that at least one second has passed, to
801 avoid time stamp issues with makefile rules rerunning autotools
804 - The warnings in the category 'extra-portability' are now enabled by
805 '-Wall'. In previous versions, one has to use '-Wextra-portability'
810 - Various minor bugfixes for recent or long-standing bugs.
812 * Bugs introduced by 1.11:
814 - The AM_COND_IF macro also works if the shell expression for the
815 conditional is no longer valid for the condition.
817 - The automake-provided parallel testsuite harness no longer fails
818 with BSD make used in parallel mode when there are test scripts in
819 a subdirectory, like in:
821 TESTS = sub/foo.test sub/bar.test
823 * Long-standing bugs:
825 - Automake's own build system finally have a real "installcheck" target.
827 - Vala-related cleanup rules are now more complete, and work better in
830 - Files listed with the AC_REQUIRE_AUX_FILE macro in configure.ac are
831 now automatically distributed also if the directory of the auxiliary
832 files coincides with the top-level directory.
834 - Automake now detects the presence of the '-d' flag in the various
835 '*YFLAGS' variables even when their definitions involve indirections
836 through other variables, such as in:
838 AM_YFLAGS = $(foo_opts)
840 - Automake now complains if a '*YFLAGS' variable has any conditional
841 content, not only a conditional definition.
843 - Explicit enabling and/or disabling of Automake warning categories
844 through the '-W...' options now always takes precedence over the
845 implicit warning level implied by Automake strictness (foreign, gnu
846 or gnits), regardless of the order in which such strictness and
847 warning flags appear. For example, a setting like:
848 AUTOMAKE_OPTIONS = -Wall --foreign
849 will cause the warnings in category 'portability' to be enabled, even
850 if those warnings are by default disabled in 'foreign' strictness.
852 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
854 Bugs fixed in 1.11.5:
856 * Bugs introduced by 1.11.3:
858 - Vala files with '.vapi' extension are now recognized and handled
859 correctly again. See automake bug#11222.
861 - Vala support work again for projects that contain some program
862 built from '.vala' (and possibly '.c') sources and some other
863 program built from '.c' sources *only*. See automake bug#11229.
865 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
869 * Miscellaneous changes:
871 - The 'ar-lib' script now ignores the "s" (symbol index) and "S" (no
872 symbol index) modifiers as well as the "s" action, as the symbol index
873 is created unconditionally by Microsoft lib. Also, the "q" (quick)
874 action is now a synonym for "r" (replace). Also, the script has been
875 ignoring the "v" (verbose) modifier already since Automake 1.11.3.
877 - When the 'compile' script is used to wrap MSVC, it now accepts an
878 optional space between the -I, -L and -l options and their respective
879 arguments, for better POSIX compliance.
881 - There is an initial, experimental support for automatic dependency
882 tracking with tcc (the Tiny C Compiler). Its associated depmode is
883 currently recognized as "icc" (but this and other details are likely
884 to change in future versions).
886 - Automatic dependency tracking now works also with the IBM XL C/C++
887 compilers, thanks to the new new depmode 'xlc'.
889 Bugs fixed in 1.11.4:
891 * Bugs introduced by 1.11.2:
893 - A definition of 'noinst_PYTHON' before 'python_PYTHON' (or similar)
894 no longer cause spurious failures upon "make install".
896 - The user can now instruct the 'uninstall-info' rule not to update
897 the '${infodir}/dir' file by exporting the environment variable
898 'AM_UPDATE_INFO_DIR' to the value "no". This is done for consistency
899 with how the 'install-info' rule operates since automake 1.11.2.
901 * Long-standing bugs:
903 - It is now possible for a foo_SOURCES variable to hold Vala sources
904 together with C header files, as well as with sources and headers for
905 other supported languages (e.g., C++). Previously, only mixing C and
906 Vala sources was supported.
908 - If "aclocal --install" is used, and the first directory specified with
909 '-I' is non-existent, aclocal will now create it before trying to copy
912 - An empty declaration of a "foo_PRIMARY" no longer cause the generated
913 install rules to create an empty $(foodir) directory; for example, if
914 Makefile.am contains something like:
918 pkglibexec_SCRIPTS += bar.sh
921 the $(pkglibexec) directory will not be created upon "make install".
923 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
927 * Miscellaneous changes:
929 - Automake's own build system is more silent by default, making use of
930 the 'silent-rules' option.
932 - The master copy of the 'gnupload' script is now maintained in gnulib,
935 - The 'missing' script no longer tries to wrap calls to 'tar'.
937 - "make dist" no longer wraps 'tar' invocations with the 'missing'
938 script. Similarly, the obsolescent variable '$(AMTAR)' (which you
939 shouldn't be using BTW ;-) no longer invokes the 'missing' script
940 to wrap tar, but simply invokes the 'tar' program itself.
942 - "make dist" can now create lzip-compressed tarballs.
944 - In the Automake info documentation, the Top node and the nodes about
945 the invocation of the automake and aclocal programs have been renamed;
946 now, calling "info automake" will open the Top node, while calling
947 "info automake-invocation" and "info aclocal-invocation" will access
948 the nodes about the invocation of respectively automake and aclocal.
950 - Automake is now distributed as a gzip-compressed and an xz-compressed
951 tarball. Previously, bzip2 was used instead of xz.
953 - The last relics of Python 1.5 support have been removed from the
954 AM_PATH_PYTHON macro.
956 - For programs and libraries, automake now detects EXTRA_foo_DEPENDENCIES
957 and adds them to the normal list of dependencies, but without
958 overwriting the foo_DEPENDENCIES variable, which is normally computed
961 Bugs fixed in 1.11.3:
963 * Bugs introduced by 1.11.2:
965 - Automake now correctly recognizes the prefix/primary combination
966 'pkglibexec_SCRIPTS' as valid.
968 - The parallel-tests harness no longer trips on sed implementations
969 with stricter limits on the length of input lines (problem seen at
972 * Long-standing bugs:
974 - The "deleted header file problem" for *.am files is avoided by stub
975 rules. This allows 'make' to trigger a rerun of 'automake' also if
976 some previously needed '.am' file has been removed.
978 - The 'silent-rules' option now generates working makefiles even
979 for the uncommon 'make' implementations that do not support the
980 nested-variables extension to POSIX 2008. For such 'make'
981 implementations, whether a build is silent is determined at
982 configure time, and cannot be overridden at make time with
983 "make V=0" or "make V=1".
985 - Vala support now works better in VPATH setups.
987 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
991 * Changes to aclocal:
993 - The `--acdir' option is deprecated. Now you should use the new options
994 `--automake-acdir' and `--system-acdir' instead.
996 - The `ACLOCAL_PATH' environment variable is now interpreted as a
997 colon-separated list of additional directories to search after the
998 automake internal acdir (by default ${prefix}/share/aclocal-APIVERSION)
999 and before the system acdir (by default ${prefix}/share/aclocal).
1001 * Miscellaneous changes:
1003 - The Automake support for automatic de-ANSI-fication has been
1004 deprecated. It will probably be removed in the next major Automake
1007 - The `lzma' compression scheme and associated automake option `dist-lzma'
1008 is obsoleted by `xz' and `dist-xz' due to upstream changes.
1010 - You may adjust the compression options used in dist-xz and dist-bzip2.
1011 The default is now merely -e for xz, but still -9 for bzip; you may
1012 specify a different level via the XZ_OPT and BZIP2 envvars respectively.
1013 E.g., "make dist-xz XZ_OPT=-7" or "make dist-bzip2 BZIP2=-5"
1015 - The `compile' script now converts some options for MSVC for a better
1016 user experience. Similarly, the new `ar-lib' script wraps Microsoft lib.
1018 - The py-compile script now accepts empty arguments passed to the options
1019 `--destdir' and `--basedir', and complains about unrecognized options.
1020 Moreover, a non-option argument or a special `--' argument terminates
1021 the list of options.
1023 - A developer that needs to pass specific flags to configure at "make
1024 distcheck" time can now, and indeed is advised to, do so by defining
1025 the developer-reserved makefile variable AM_DISTCHECK_CONFIGURE_FLAGS,
1026 instead of the old DISTCHECK_CONFIGURE_FLAGS.
1027 The DISTCHECK_CONFIGURE_FLAGS variable should now be reserved for the
1028 user; still, the old Makefile.am files that used to define it will
1029 still continue to work as before.
1031 - New macro AM_PROG_AR that looks for an archiver and wraps it in the new
1032 'ar-lib' auxiliary script if the selected archiver is Microsoft lib.
1033 This new macro is required for LIBRARIES and LTLIBRARIES when automake
1034 is run with -Wextra-portability and -Werror.
1036 - When using DejaGnu-based testsuites, the user can extend the `site.exp'
1037 file generated by automake-provided rules by defining the special make
1038 variable `$(EXTRA_DEJAGNU_SITE_CONFIG)'.
1040 - The `install-info' rule can now be instructed not to create/update
1041 the `${infodir}/dir' file, by exporting the new environment variable
1042 `AM_UPDATE_INFO_DIR' to the value "no".
1044 Bugs fixed in 1.11.2:
1046 * Bugs introduced by 1.11:
1048 - The parallel-tests driver no longer produces erroneous results with
1049 Tru64/OSF 5.1 sh upon unreadable log files.
1051 - The `parallel-tests' test driver does not report spurious successes
1052 when used with concurrent FreeBSD make (e.g., "make check -j3").
1054 - When the parallel-tests driver is in use, automake now explicitly
1055 rejects invalid entries and conditional contents in TEST_EXTENSIONS,
1056 instead of issuing confusing and apparently unrelated error messages
1057 (e.g., "non-POSIX variable name", "bad characters in variable name",
1058 or "redefinition of TEST_EXTENSIONS), or even, in some situations,
1059 silently producing broken `Makefile.in' files.
1061 - The `silent-rules' option now truly silences all compile rules, even
1062 when dependency tracking is disabled. Also, when `silent-rules' is
1063 not used, `make' output no longer contains spurious backslash-only
1064 lines, thus once again matching what Automake did before 1.11.
1066 - The AM_COND_IF macro also works if the shell expression for the
1067 conditional is no longer valid for the condition.
1069 * Long-standing bugs:
1071 - The order of Yacc and Lex flags is fixed to be consistent with other
1072 languages: $(AM_YFLAGS) comes before $(YFLAGS), and $(AM_LFLAGS) before
1073 $(LFLAGS), so that the user variables override the developer variables.
1075 - "make distcheck" now correctly complains also when "make uninstall"
1076 leaves one and only one file installed in $(prefix).
1078 - A "make uninstall" issued before a "make install", or after a mere
1079 "make install-data" or a mere "make install-exec" does not spuriously
1082 - Automake now warns about more primary/directory invalid combinations,
1083 such as "doc_LIBRARIES" or "pkglib_PROGRAMS".
1085 - Rules generated by Automake now try harder to not change any files when
1086 `make -n' is invoked. Fixes include compilation of Emacs Lisp, Vala, or
1087 Yacc source files and the rule to update config.h.
1089 - Several scripts and the parallel-tests testsuite driver now exit with
1090 the right exit status upon receiving a signal.
1092 - A per-Makefile.am setting of -Werror does not erroneously carry over
1093 to the handling of other Makefile.am files.
1095 - The code for automatic dependency tracking works around a Solaris
1096 make bug triggered by sources containing repeated slashes when the
1097 `subdir-objects' option was used.
1099 - The makedepend and hp depmodes now work better with VPATH builds.
1101 - Java sources specified with check_JAVA are no longer compiled for
1102 "make all", but only for "make check".
1104 - An usage like "java_JAVA = foo.java" will now cause Automake to warn
1105 and error out if `javadir' is undefined, instead of silently producing
1106 a broken Makefile.in.
1108 - aclocal and automake now honour the configure-time definitions of
1109 AUTOCONF and AUTOM4TE when they spawn autoconf or autom4te processes.
1111 - The `install-info' recipe no longer tries to guess whether the
1112 `install-info' program is from Debian or from GNU, and adaptively
1113 change its behaviour; this has proven to be frail and easy to
1116 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1118 Bugs fixed in 1.11.1:
1120 - Lots of minor bugfixes.
1122 * Bugs introduced by 1.11:
1124 - The `parallel-tests' test driver works around a GNU make 3.80 bug with
1125 trailing white space in the test list (`TESTS = foo $(EMPTY)').
1127 * Long standing bugs:
1129 - On Darwin 9, `pythondir' and `pyexecdir' pointed below `/Library/Python'
1130 even if the `--prefix' argument pointed outside of a system directory.
1131 AM_PATH_PYTHON has been fixed to ignore the value returned from python's
1132 `get_python_lib' function if it points outside the configured prefix,
1133 unless the `--prefix' argument was either `/usr' or below `/System'.
1135 - The testsuite does not try to change the mode of `ltmain.sh' files from
1136 a Libtool installation (symlinked to test directories) any more.
1138 - AM_PROG_GCJ uses AC_CHECK_TOOLS to look for `gcj' now, so that prefixed
1139 tools are preferred in a cross-compile setup.
1141 - The distribution is tarred up with mode 755 now by the `dist*' targets.
1142 This fixes a race condition where untrusted users could modify files
1143 in the $(PACKAGE)-$(VERSION) distdir before packing if the toplevel
1144 build directory was world-searchable. This is CVE-2009-4029.
1146 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1150 * Version requirements:
1152 - Autoconf 2.62 or greater is required.
1154 * Changes to aclocal:
1156 - The autoconf version check implemented by aclocal in aclocal.m4
1157 (and new in Automake 1.10) is degraded to a warning. This helps
1158 in the common case where the Autoconf versions used are compatible.
1160 * Changes to automake:
1162 - The automake program can run multiple threads for creating most
1163 Makefile.in files concurrently, if at least Perl 5.7.2 is available
1164 with interpreter-based threads enabled. Set the environment variable
1165 AUTOMAKE_JOBS to the maximum number of threads to use, in order to
1166 enable this experimental feature.
1168 * Changes to Libtool support:
1170 - Libtool generic flags are now passed to the install and uninstall
1173 - distcheck works with Libtool 2.x even when LT_OUTPUT is used, as
1174 config.lt is removed correctly now.
1176 * Languages changes:
1178 - subdir-object mode works now with Fortran (F77, FC, preprocessed
1179 Fortran, and Ratfor).
1181 - For files with extension .f90, .f95, .f03, or .f08, the flag
1182 $(FCFLAGS_f[09]x) computed by AC_FC_SRCEXT is now used in compile rules.
1184 - Files with extension .sx are also treated as preprocessed assembler.
1186 - The default source file extension (.c) can be overridden with
1187 AM_DEFAULT_SOURCE_EXT now.
1189 - Python 3.0 is supported now, Python releases prior to 2.0 are no
1192 - AM_PATH_PYTHON honors python's idea about the site directory.
1194 - There is initial support for the Vala programming language, when using
1195 Vala 0.7.0 or later.
1197 * Miscellaneous changes:
1199 - Automake development is done in a git repository on Savannah now, see
1201 http://git.sv.gnu.org/gitweb/?p=automake.git
1203 A read-only CVS mirror is provided at
1205 cvs -d :pserver:anonymous@pserver.git.sv.gnu.org:/automake.git \
1206 checkout -d automake HEAD
1208 - "make dist" can now create xz-compressed tarballs,
1209 as well as (deprecated?) lzma-compressed tarballs.
1211 - `automake --add-missing' will by default install the GPLv3 file as
1212 COPYING if it is missing. It will also warn that the license file
1213 should be added to source control. Note that Automake will never
1214 overwrite an existing COPYING file, even when the `--force-missing'
1217 - The manual is now distributed under the terms of the GNU FDL 1.3.
1219 - Automake ships and installs man pages for automake and aclocal now.
1221 - New shorthand `$(pkglibexecdir)' for `$(libexecdir)/@PACKAGE@'.
1223 - install-sh supports -C, which does not update the installed file
1224 (and its time stamps) if the contents did not change.
1226 - The `gnupload' script has been revamped.
1228 - The `depcomp' and `compile' scripts now work with MSVC under MSYS.
1230 - The targets `install' and `uninstall' are more efficient now, in that
1231 for example multiple files from one Automake variable such as
1232 `bin_SCRIPTS' are copied in one `install' (or `libtool --mode=install')
1233 invocation if they do not have to be renamed.
1235 Both install and uninstall may sometimes enter (`cd' into) the target
1236 installation directory now, when no build-local scripts are used.
1238 Both install and uninstall do not fail anymore but do nothing if an
1239 installation directory variable like `bindir' is set to the empty string.
1241 For built-in rules, `make install' now fails reliably if installation
1242 of a file failed. Conversely, `make uninstall' even succeeds when
1243 issued multiple times.
1245 These changes may need some adjustments from users: For example,
1246 some `install' programs refuse to install multiple copies of the
1247 same file in one invocation, so you may need to remove duplicate
1248 entries from file lists.
1250 Also, within one set of files, say, nobase_data_DATA, the order of
1251 installation may be changed, or even unstable among different hosts,
1252 due to the use of associative arrays in awk. The increased use of
1253 awk matches a similar move in Autoconf to provide for better scaling.
1255 Further, most undocumented per-rule install command variables such as
1256 binSCRIPT_INSTALL have been removed because they are not needed any
1257 more. Packages which use them should be using the appropriate one of
1258 INSTALL_{DATA,PROGRAM,SCRIPT} or their install_sh_{DATA,PROGRAM,SCRIPT}
1259 counterpart, depending on the type of files and the need for automatic
1260 target directory creation.
1262 - The "deleted header file problem" for *.m4 files is avoided by
1263 stub rules. This allows `make' to trigger a rerun of `aclocal'
1264 also if some previously needed macro file has been removed.
1266 - Rebuild rules now also work for a removed `subdir/Makefile.in' in
1267 an otherwise up to date tree.
1269 - The `color-tests' option causes colored test result output on terminals.
1271 - The `parallel-tests' option enables a new test driver that allows for
1272 parallel test execution, inter-test dependencies, lazy test execution
1273 for unit-testing, re-testing only failed tests, and formatted result output
1274 as RST (reStructuredText) and HTML. Enabling this option may require some
1275 changes to your test suite setup; see the manual for details.
1277 - The `silent-rules' option enables Linux kernel-style silent build output.
1278 This option requires the widely supported but non-POSIX `make' feature
1279 of recursive variable expansion, so do not use it if your package needs
1280 to build with `make' implementations that do not support it.
1282 To enable less verbose build output, the developer has to use the Automake
1283 option `silent-rules' in `AM_INIT_AUTOMAKE', or call the `AM_SILENT_RULES'
1284 macro. The user may then set the default verbosity by passing the
1285 `--enable-silent-rules' option to `configure'. At `make' run time, this
1286 default may be overridden using `make V=0' for less verbose, and `make V=1'
1287 for backward-compatible verbose output.
1289 - New prefix `notrans_' for manpages which should not be transformed
1290 by --program-transform.
1292 - New macro AM_COND_IF for conditional evaluation and conditional
1295 - For AC_CONFIG_LINKS, if source and destination are equal, do not
1296 remove the file in a non-VPATH build. Such setups work with Autoconf
1299 - AM_MAINTAINER_MODE now allows for an optional argument specifying
1300 the default setting.
1302 - AM_SUBST_NOTMAKE may prevent substitution of AC_SUBSTed variables,
1303 useful especially for multi-line values.
1305 - Automake's early configure-time sanity check now diagnoses an
1306 unsafe absolute source directory name and makes configure fail.
1308 - The Automake macros and rules cope better with whitespace in the
1309 current directory name, as long as the relative path to `configure'
1310 does not contain whitespace. To this end, the values of `$(MISSING)'
1311 and `$(install_sh)' may contain suitable quoting, and their expansion
1312 might need `eval'uation if used outside of a makefile. These
1313 undocumented variables may be used in several documented macros such
1314 as $(AUTOCONF) or $(MAKEINFO).
1318 * Long-standing bugs:
1320 - Fix aix dependency tracking for libtool objects.
1322 - Work around AIX sh quoting issue in AC_PROG_CC_C_O, leading to
1323 unnecessary use of the `compile' script.
1325 - For nobase_*_LTLIBRARIES with nonempty directory components, the
1326 correct `-rpath' argument is used now.
1328 - `config.status --file=Makefile depfiles' now also works with the
1329 extra quoting used internally by Autoconf 2.62 and newer
1330 (it used to work only without the `--file=' bit).
1332 - The `missing' script works better with versioned tool names.
1334 - Semantics for `missing help2man' have been revamped:
1336 Previously, if `help2man' was not present, `missing help2man' would have
1337 the following semantics: if some man page was out of date but present, then
1338 a warning would be printed, but the exit status was 0. If the man page was
1339 not present at all, then `missing' would create a replacement man page
1340 containing an error message, and exit with a status of 2. This does not play
1341 well with `make': the next run will see this particular man page as being up
1342 to date, and will only error out on the next generated man page, if any;
1343 repeat until all pages are done. This was not desirable.
1345 These are the new semantics: if some man page is not present, and help2man
1346 is not either, then `missing' will warn and generate the replacement page
1347 containing the error message, but exit successfully. However, `make dist'
1348 will ensure that no such bogus man pages are packaged into a tarball.
1350 - Targets provided by automake behave better with `make -n', in that they
1351 take care not to create files.
1353 - `config.status Makefile... depfiles' works fine again in the presence of
1354 disabled dependency tracking.
1356 - The default no-op recursive rules for these targets also work with BSD make
1357 now: html, install-html, install-dvi, install-pdf, install-pdf, install-info.
1359 - `make distcheck' works also when both a directory and some file below it
1360 have been added to a distribution variable, such as EXTRA_DIST or *_SOURCES.
1362 - Texinfo dvi, ps, pdf, and html output files are not removed upon
1363 `make mostlyclean' any more; only the LaTeX by-products are.
1365 - Renamed objects also work with the `subdir-objects' option and
1366 source file languages which Automake does not know itself.
1368 - `automake' now correctly complains about variable assignments which are
1369 preceded by a comment, extend over multiple lines with backslash-escaped
1370 newlines, and end in a comment sign. Previous versions would silently
1371 and wrongly ignore such assignments completely.
1373 * Bugs introduced by 1.10:
1375 - Fix output of dummy dependency files in presence of post-processed
1376 Makefile.in's again, but also cope with long lines.
1378 - $(EXEEXT) is automatically appended to filenames of XFAIL_TESTS
1379 that have been declared as programs in the same Makefile.
1380 This is for consistency with the analogous change to TESTS in 1.10.
1382 - Fix order of standard includes to again be `-I. -I$(srcdir)',
1383 followed by directories containing config headers.
1385 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1389 * Version requirements:
1391 - Autoconf 2.60 or greater is required.
1393 - Perl 5.6 or greater is required.
1395 * Changes to aclocal:
1397 - aclocal now also supports -Wmumble and -Wno-mumble options.
1399 - `dirlist' entries (for the aclocal search path) may use shell
1400 wildcards such as `*', `?', or `[...]'.
1402 - aclocal supports an --install option that will cause system-wide
1403 third-party macros to be installed in the local directory
1404 specified with the first -I flag. This option also uses #serial
1405 lines in M4 files to upgrade local macros.
1407 The new aclocal options --dry-run and --diff help to review changes
1408 before they are installed.
1410 - aclocal now outputs an autoconf version check in aclocal.m4 in
1411 projects using automake.
1413 For a few years, automake and aclocal have been calling autoconf
1414 (or its underlying engine autom4te) to accurately retrieve the
1415 data they need from configure.ac and its siblings. Doing so can
1416 only work if all autotools use the same version of autoconf. For
1417 instance a Makefile.in generated by automake for one version of
1418 autoconf may stop working if configure is regenerated with another
1419 version of autoconf, and vice versa.
1421 This new version check ensures that the whole build system has
1422 been generated using the same autoconf version.
1424 * Support for new Autoconf macros:
1426 - The new AC_REQUIRE_AUX_FILE Autoconf macro is supported.
1428 - If `subdir-objects' is set, and AC_CONFIG_LIBOBJ_DIR is specified,
1429 $(LIBOBJS), $(LTLIBOBJS), $(ALLOCA), and $(LTALLOCA) can be used
1430 in different directories. However, only one instance of such a
1431 library objects directory is supported.
1433 * Change to Libtool support:
1435 - Libtool generic flags (those that go before the --mode=MODE option)
1436 can be specified using AM_LIBTOOLFLAGS and target_LIBTOOLFLAGS.
1438 * Yacc and Lex changes:
1440 - The rebuild rules for distributed Yacc and Lex output will avoid
1441 overwriting existing files if AM_MAINTAINER_MODE and maintainer-mode
1444 - ylwrap is now always used for lex and yacc source files,
1445 regardless of whether there is more than one source per directory.
1447 * Languages changes:
1449 - Preprocessed assembler (*.S) compilation now honors CPPFLAGS,
1450 AM_CPPFLAGS and per-target _CPPFLAGS, and supports dependency
1451 tracking, unlike non-preprocessed assembler (*.s).
1453 - subdir-object mode works now with Assembler. Automake assumes
1454 that the compiler understands `-c -o'.
1456 - Preprocessed assembler (*.S) compilation now also honors
1457 $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES).
1459 - Improved support for Objective C:
1460 - Autoconf's new AC_PROG_OBJC will enable automatic dependency tracking.
1461 - A new section of the manual documents the support.
1463 - New support for Unified Parallel C:
1464 - AM_PROG_UPC looks for a UPC compiler.
1465 - A new section of the manual documents the support.
1467 - Per-target flags are now correctly handled in link rules.
1469 For instance maude_CFLAGS correctly overrides AM_CFLAGS; likewise
1470 for maude_LDFLAGS and AM_LDFLAGS. Previous versions bogusly
1471 preferred AM_CFLAGS over maude_CFLAGS while linking, and they
1472 used both AM_LDFLAGS and maude_LDFLAGS on the same link command.
1474 The fix for compiler flags (i.e., using maude_CFLAGS instead of
1475 AM_CFLAGS) should not hurt any package since that is how _CFLAGS
1476 is expected to work (and actually works during compilation).
1478 However using maude_LDFLAGS "instead of" AM_LDFLAGS rather than
1479 "in addition to" breaks backward compatibility with older versions.
1480 If your package used both variables, as in
1482 AM_LDFLAGS = common flags
1483 bin_PROGRAMS = a b c
1484 a_LDFLAGS = more flags
1487 and assumed *_LDFLAGS would sum up, you should rewrite it as
1489 AM_LDFLAGS = common flags
1490 bin_PROGRAMS = a b c
1491 a_LDFLAGS = $(AM_LDFLAGS) more flags
1494 This new behavior of *_LDFLAGS is more coherent with other
1495 per-target variables, and the way *_LDFLAGS variables were
1496 considered internally.
1498 * New installation targets:
1500 - New targets mandated by GNU Coding Standards:
1505 By default they will only install Texinfo manuals.
1506 You can customize them with *-local variants:
1512 - The undocumented recursive target `uninstall-info' no longer exists.
1513 (`uninstall' is in charge of removing all possible documentation
1514 flavors, including optional formats such as dvi, ps, or info even
1515 when `no-installinfo' is used.)
1517 * Miscellaneous changes:
1519 - Automake no longer complains if input files for AC_CONFIG_FILES
1520 are specified using shell variables.
1522 - clean, distribution, or rebuild rules are normally disabled for
1523 inputs and outputs of AC_CONFIG_FILES, AC_CONFIG_HEADERS, and
1524 AC_CONFIG_LINK specified using shell variables. However, if these
1525 variables are used as ${VAR}, and AC_SUBSTed, then Automake will
1526 be able to output rules anyway.
1527 (See the Automake documentation for AC_CONFIG_FILES.)
1529 - $(EXEEXT) is automatically appended to filenames of TESTS
1530 that have been declared as programs in the same Makefile.
1531 This is mostly useful when some check_PROGRAMS are listed in TESTS.
1533 - `-Wportability' has finally been turned on by default for `gnu' and
1534 `gnits' strictness. This means, automake will complain about %-rules
1535 or $(GNU Make functions) unless you switch to `foreign' strictness or
1536 use `-Wno-portability'.
1538 - Automake now uses AC_PROG_MKDIR_P (new in Autoconf 2.60), and uses
1539 $(MKDIR_P) instead of $(mkdir_p) to create directories. The
1540 $(mkdir_p) variable is still defined (to the same value as
1541 $(MKDIR_P)) but should be considered obsolete. If you are using
1542 $(mkdir_p) in some of your rules, please plan to update them to
1543 $(MKDIR_P) at some point.
1545 - AM_C_PROTOTYPES and ansi2knr are now documented as being obsolete.
1546 They still work in this release, but may be withdrawn in a future one.
1548 - Inline compilation rules for gcc3-style dependency tracking are
1551 - Automake installs a "Hello World!" example package in $(docdir).
1552 This example is used throughout the new "Autotools Introduction"
1553 chapter of the manual.
1555 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1559 * Makefile.in bloat reduction:
1561 - Inference rules are used to compile sources in subdirectories when
1562 the `subdir-objects' option is used and no per-target flags are
1563 used. This should reduce the size of some projects a lot, because
1564 Automake used to output an explicit rule for each such object in
1567 - Automake no longer outputs three rules (.o, .obj, .lo) for each
1568 object that must be built with explicit rules. It just outputs
1569 the rules required to build the kind of object considered: either
1570 the two .o and .obj rules for usual objects, or the .lo rule for
1573 * Change to Libtool support:
1575 - Libtool tags are used with libtool versions that support them.
1576 (I.e., with Libtool 1.5 or greater.)
1578 - Automake is now able to handle setups where a libtool library is
1579 conditionally installed in different directories, as in
1582 lib_LTLIBRARIES = liba.la
1584 pkglib_LTLIBRARIES = liba.la
1586 liba_la_SOURCES = ...
1588 * Changes to aclocal:
1590 - aclocal now ensures that AC_DEFUNs and AU_DEFUNs it discovers are
1591 really evaluated, before it decides to include them in aclocal.m4.
1592 This solves nasty problems with conditional redefinitions of
1593 Autoconf macros in /usr/share/aclocal/*.m4 files causing extraneous
1594 *.m4 files to be included in any project using these macros.
1595 (Calls to AC_PROG_EGREP causing libtool.m4 to be included is the
1596 most famous instance of this bug.)
1598 - Do not complain about missing conditionally AC_REQUIREd macros
1599 that are not actually used. In 1.8.x aclocal would correctly
1600 determine which of these macros were really needed (and include
1601 only these in the package); unfortunately it would also require
1602 all of them to be present in order to run. This created
1603 situations were aclocal would not work on a tarball distributing
1604 all the macros it uses. For instance running aclocal on a project
1605 containing only the subset of the Gettext macros in use by the
1606 project did not work, because gettext conditionally requires other
1609 * Portability improvements:
1611 - Tar format can be chosen with the new options tar-v7, tar-ustar, and
1612 tar-pax. The new option filename-length-max=99 helps diagnosing
1613 filenames that are too long for tar-v7. (PR/414)
1615 - Variables aumented with `+=' are now automatically flattened (i.e.,
1616 trailing backslashes removed) and then wrapped around 80 colummns
1617 (adding trailing backslashes). In previous versions, a long series
1623 would result in a single-line definition of VAR that could possibly
1624 exceed the maximum line length of some make implementations.
1626 Non-augmented variables are still output as they are defined in
1631 - Support Fortran 90/95 with the new "fc" and "ppfc" languages.
1632 Works the same as the old Fortran 77 implementation; just replace
1633 F77 with FC everywhere (exception: FFLAGS becomes FCFLAGS).
1634 Requires a version of autoconf which provides AC_PROG_FC (>=2.59).
1636 - Support for conditional _LISP.
1638 - Support for conditional -hook and -local rules (PR/428).
1640 - Diagnose AC_CONFIG_AUX_DIR calls following AM_INIT_AUTOMAKE. (PR/49)
1642 - Automake will not write any Makefile.ins after the first error it
1643 encounters. The previous Makefile.ins (if any) will be left in
1644 place. (Warnings will not prevent output, but remember they can
1645 be turned into errors with -Werror.)
1647 - The restriction that SUBDIRS must contain direct children is gone.
1650 - The manual tells more about SUBDIRS vs. DIST_SUBDIRS.
1651 It also gives an example of nested packages using AC_CONFIG_SUBDIRS.
1653 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1655 Bugs fixed in 1.8.5:
1657 * Long-standing bugs:
1659 - Define DIST_SUBDIRS even when the `no-dist' or `cygnus' options are used
1660 so that `make distclean' and `make maintainer-clean' can work.
1662 - Define AR and ARFLAGS even when only EXTRA_LIBRARIES are defined.
1664 - Fix many rules to please FreeBSD make, which runs commands with `sh -e'.
1666 - Polish diagnostic when no input file is found.
1668 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1670 Bugs fixed in 1.8.4:
1672 * Long-standing bugs:
1674 - Fix AM_PATH_PYTHON to correctly display $PYTHON when it has been
1675 overridden by the user.
1677 - Honor PATH_SEPARATOR in various places of the Automake package, for
1680 - Adjust dependency tracking mode detection to ICC 8.0's new output.
1683 - Fix install-sh so it can install the `mv' binary... using `mv'.
1685 - Fix tru64 dependency tracking for libtool objects.
1687 - Work around Exuberant Ctags when creating a TAGS files in a directory
1688 without files to scan but with subdirectories to include.
1690 * Bugs introduced by 1.8:
1692 - Fix an "internal error" when @LIBOBJS@ is used in a variable that is
1693 not defined in the same conditions as the _LDADD that uses it.
1695 - Do not warn when JAVAROOT is overridden, this is legitimate.
1697 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1699 Bugs fixed in 1.8.3:
1701 * Long-standing bugs:
1703 - Quote filenames in installation rules, in case $DESTDIR, $prefix,
1704 or any of the other *dir variables contain a space.
1706 Please note that Automake does not and cannot support spaces in
1707 filenames that are involved during the build. This change affects
1708 only installation paths, so that `make install' does not bomb out
1709 in packages configured with
1710 ./configure --prefix '/c/Program Files'
1712 - Fix the depfiles output so it works with GNU sed (<4.1) even when
1713 POSIXLY_CORRECT is set.
1715 - Do not AC_SUBST(LIBOBJS) in AM_WITH_REGEX. This macro was unusable
1716 since Autoconf 2.54, which defines LIBOBJS itself.
1718 - Fix a potential (but unlikely) race condition in parallel elisp
1719 builds. (Introduced in 1.7.3.)
1721 - Do not assume that users override _DEPENDENCIES in all conditions
1722 where Automake will try to define them.
1724 - Do not use `mkdir -p' in mkinstalldirs, unless this is GNU mkdir.
1725 Solaris 8's `mkdir -p' is not thread-safe and can break parallel
1728 This fix also affects the $(mkdir_p) variable defined since
1729 Automake 1.8. It will be set to `mkdir -p' only if mkdir is GNU
1730 mkdir, and to `mkinstalldirs' or `install-sh -d' otherwise.
1732 - Secure temporary directory creation in `make distcheck'. (PR/413)
1734 - Do not generate two build rules for `parser.h' when the
1735 parser appears in two different conditionals.
1737 - Work around a Solaris 8 /bin/sh bug in the test for dependency
1738 checking. Usually ./configure will not pick this shell; so this
1739 fix only helps cases where the shell is forced to /bin/sh.
1741 * Bugs introduced by 1.8:
1743 - In some situations (hand-written `m4_include's), aclocal would
1744 call the `File::Spec->rel2abs' method, which was only introduced
1745 in Perl 5.6. This new version reestablish support Perl 5.005.
1747 It is likely that the next major Automake releases will require at
1748 least Perl 5.6. Consider upgrading your development environment
1749 if you are still using the five-year-old Perl 5.005.
1751 - Automake would sometimes fail to define rules for targets listed
1752 in variables defined in multiple conditions. For instance on
1758 it would define only the `a.$(OBJEXT): a.c' rule and omit the
1759 `b.$(OBJEXT): b.c' rule.
1761 * New sections in manual:
1763 - Third-Party Makefiles: how to interface third party Makefiles.
1764 - Upgrading: upgrading packages to newer Automake versions.
1765 - Multiple Outputs: handling tools that produce many outputs.
1767 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1771 * A (well known) portability bug slipped in the changes made to
1772 install-sh in Automake 1.8.1. The broken install-sh would refuse to
1773 install anything on Tru64.
1775 * Fix install rules for conditionally built python files. (This never
1778 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1782 * Bugs introduced by 1.8:
1784 - Fix Config.pm import error with old Perl versions (at least
1785 5.005_03). One symptom is that aclocal could not find its macro
1788 - Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
1789 created by `make install' are always world readable, even if the
1790 installer happens to have an overly restrictive umask (e.g. 077).
1791 This was a mistake and has been reverted. There are at least two
1792 reasons why we must not use `-m 0755':
1793 - it causes special bits like SGID to be ignored,
1794 - it may be too restrictive (some setups expect 775 directories).
1796 - Fix aclocal to honor definitions located in files which have been
1797 m4_included manually. aclocal 1.8 had been updated to check
1798 m4_included files for new requirements, but forgot that these
1799 m4_included files can also provide new definitions.
1801 Note that if you have such a setup, we recommend you get rid of
1802 it. In the past, there was a reason to m4_include files manually:
1803 aclocal used to duplicate entire M4 files into aclocal.m4, even
1804 files that were distributed. Some packages were therefore
1805 m4_including the distributed file directly, and playing some
1806 tricks to ensure aclocal would not copy that file to aclocal.m4,
1807 in order to limit the amount of duplication. Since aclocal 1.8.x
1808 will precisely output m4_includes for local M4 files, we recommend
1809 that you clean up your setup, removing all manual m4_includes and
1810 letting aclocal output them.
1812 - Output detailed menus in the Info version if the Automake manual,
1813 so that Emacs can locate the indexes.
1815 - configure.ac and configure were listed twice in DIST_COMMON (an
1816 internal variable where Automake lists configury files to
1817 distribute). This was harmless, but unaesthetic.
1819 - Use `chmod a-w' instead of `chmod -w' as the latter honors umask.
1820 This was an issue only in the Automake package itself, not in
1823 - Automake assumed that all AC_CONFIG_LINKS arguments had the form
1824 DEST:SRC. This was wrong, as some packages do
1825 AC_CONFIG_LINKS($computedlinks). This version no longer abort in
1828 - Contrary to mkinstalldirs, $(mkdir_p) was expecting exactly one
1829 argument. This caused two kinds of failures:
1830 - Rules installing data in a conditionally defined directory
1831 failed when that directory was undefined. In this case no
1832 argument was supplied.
1833 - `make installdirs' failed, because several directories were
1834 passed to $(mkdir_p). This was an issue only on platform
1835 were $(mkdir_p) is implemented with `install-sh -d'.
1836 $(mkdir_p) as been changed to accept 0 or more arguments, as
1839 * Long-standing bugs:
1841 - Fix an unexpected diagnostic occurring when users attempt
1842 to override some internal variables that Automake appends to.
1844 - aclocal now scans configure.ac for macro definitions (PR/319).
1846 - Fix a portability issue with OSF1/Tru64 Make. If a directory
1847 distributes files which are outside itself (this usually occurs
1848 when using AC_CONFIG_AUX_DIR([../dir]) to use auxiliary files
1849 from a parent package), then `make distcheck' fails due to an
1850 optimization performed by OSF1/Tru64 Make in its VPATH handling.
1851 (tests/subpkg2.test failure)
1853 - Fix another portability issue with Sun and OSF1/Tru64 Make.
1854 In a VPATH-build configuration, `make install' would install
1855 nobase_ files to wrong locations.
1857 - Fix a Perl `uninitialized value' diagnostic occurring when
1858 automake complains that a Texinfo file does not have a
1859 @setfilename statement.
1861 - Erase config.status.lineno during `make distclean'. This file
1862 can be created by config.status. Automake already knew about
1863 configure.lineno, but forgot config.status.lineno.
1865 - Distribute all files, even those which are built and installed
1866 conditionally. This change affects files listed in conditionally
1867 defined *_HEADERS and *_PYTHON variable (unless they are nodist_*)
1868 as well as those listed in conditionally defined dist_*_DATA,
1869 dist_*_JAVA, dist_*_LISP, and dist_*_SCRIPTS variables.
1871 - Fix AM_PATH_LISPDIR to avoid \? in sed regular expressions; it
1872 doesn't conform to POSIX.
1874 - Normalize help strings for configure variables and options added
1879 - Check for python2.4 in AM_PATH_PYTHON.
1881 * Spurious failures in test suite:
1883 - tests/libtool5.test, tests/ltcond.test, tests/ltcond2.test,
1884 tests/ltconv.test: fix failures with CVS Libtool.
1885 - tests/aclocal6.test: fix failure if autom4te.cache is disabled.
1886 - tests/txinfo24.test, tests/txinfo25.test, tests/txinfo28.test:
1887 fix failures with old Texinfo versions.
1889 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1895 - The NEWS file is more verbose.
1899 - Autoconf 2.58 or greater is required.
1903 - Default source file names in the absence of a _SOURCES declaration
1904 are made by removing any target extension before appending `.c', so
1905 to make the libtool module `foo.la' from `foo.c', you only need to
1908 lib_LTLIBRARIES = foo.la
1909 foo_la_LDFLAGS = -module
1911 For backward compatibility, foo_la.c will be used instead of
1912 foo.c if this file exists or is the explicit target of a rule.
1913 However -Wobsolete will warn about this deprecated naming.
1915 - AR's `cru' flags are now set in a global ARFLAGS variable instead
1916 of being hard-coded in each $(AR) invocation, so they can be
1917 substituted from configure.ac. This has been requested by people
1918 dealing with non-POSIX ar implementations.
1920 - New warning option: -Woverride. This will warn about any user
1921 target or variable definitions which override Automake
1924 - Texinfo rules back up and restore info files when makeinfo fails.
1926 - Texinfo rules now support the `html' target.
1927 Running this requires Texinfo 4.0 or greater.
1929 `html' is a new recursive target, so if your package mixes
1930 hand-crafted `Makefile.in's with Automake-generated
1931 `Makefile.in's, you should adjust the former to support (or
1932 ignore) this target so that `make html' recurses successfully. If
1933 you had a custom `html' rule in your `Makefile.am', it's better to
1934 rename it as `html-local', otherwise your rule will override
1935 Automake's new rule (you can check that by running `automake
1936 -Woverride') and that will stop the recursion to subdirectories.
1938 Last but not least, this `html' rule is declared PHONY, even when
1939 overridden. Fortunately, it appears that few packages use a
1940 non-PHONY `html' rule.
1942 - Any file which is m4_included from configure.ac will appear as a
1943 configure and Makefile.in dependency, and will be automatically
1946 - The rules for rebuilding Makefiles and Makefile.ins will now
1947 rebuild all Makefiles and all Makefile.ins at once when one of
1948 configure's dependencies has changed. This is considerably faster
1949 than previous implementations, where config.status and automake
1950 were run separately in each directory (this still happens when you
1951 change a Makefile.am locally, without touching configure.ac or
1952 friends). Doing this also solves a longstanding issue: these
1953 rebuild rules failed to work when adding new directories to the
1954 tree, forcing you to run automake manually.
1956 - For similar reasons, the rules to rebuild configure,
1957 config.status, and aclocal.m4 are now defined in all directories.
1958 Note that if you were using the CONFIG_STATUS_DEPENDENCIES and
1959 CONFIGURE_DEPENDENCIES (formerly undocumented) variables, you
1960 should better define them in all directories. This is easily done
1961 using an AC_SUBST (make sure you prefix these dependencies with
1962 $(top_srcdir) since this variable will appear at different
1963 levels of the build tree).
1965 - aclocal will now use `m4_include' instead of copying local m4
1966 files into aclocal.m4. (Local m4 files are those you ship with
1967 your project, other files will be copied as usual.)
1969 Because m4_included files are automatically distributed, it means
1970 for most projects there is no point in EXTRA_DISTing the list of
1971 m4 files which are used. (You can probably get rid of
1972 m4/Makefile.am if you had one.)
1974 - aclocal will avoid touching aclocal.m4 when possible, so that
1975 Autom4te's cache isn't needlessly invalidated. This behavior can
1976 be switched off with the new `--force' option.
1978 - aclocal now uses Autoconf's --trace to detect macros which are
1979 actually used and will no longer include unused macros simply
1980 because they where mentioned. This was often the case for macros
1981 called conditionally.
1983 - New options no-dist and no-dist-gzip.
1985 - compile, depcomp, elisp-comp, install-sh, mdate-sh, mkinstalldirs,
1986 py-compile, and ylwrap, now all understand --version and --help.
1988 - Automake will now recognize AC_CONFIG_LINKS so far as removing created
1989 links as part of the distclean target and including source files in
1992 - AM_PATH_PYTHON now supports ACTION-IF-FOUND and ACTION-IF-NOT-FOUND
1993 argument. The latter can be used to override the default behavior
1994 (which is to abort).
1996 - Automake will exit with $? = 63 on version mismatch. (So does
1997 Autoconf 2.58) missing knows this, and in this case it will
1998 emulate the tools as if they were absent. Because older versions
1999 of Automake and Autoconf did not use this exit code, this change
2000 will only be useful in projects generated with future versions of
2003 - When using AC_CONFIG_FILES with multiple input files, Automake
2004 generates the first ".in" input file for which a ".am" exists.
2005 (Former versions would try to use only the first input file.)
2007 - lisp_DATA is now allowed. If you are using the empty ELCFILES
2008 idiom to disable byte-compilation of lisp_LISP files, it is
2009 recommended that you switch to using lisp_DATA. Note that
2010 this is not strictly equivalent: lisp_DATA will install elisp
2011 files even if emacs is not installed, while *_LISP do not
2012 install anything unless emacs is found.
2014 - Makefiles will prefer `mkdir -p' over mkinstalldirs if it is
2015 available. This selection is achieved through the Makefile
2016 variable $(mkdir_p) that is set by AM_INIT_AUTOMAKE to either
2017 `mkdir -m 0755 -p --', `$(mkinstalldirs) -m 0755', or
2018 `$(install_sh) -m 0755 -d'.
2022 - Because `mkdir -p' is available on most platforms, and we can use
2023 `install-sh -d' when it is not, the use of the mkinstalldirs
2024 script is being phased out. `automake --add-missing' no longer
2025 installs it, and if you remove mkinstalldirs from your package,
2026 automake will define $(mkinstalldirs) as an alias for $(mkdir_p).
2028 Gettext 0.12.1 still requires mkinstalldirs. Fortunately
2029 gettextize and autopoint will install it when needed. Automake
2030 will continue to define the $(mkinstalldirs) and to distribute
2031 mkinstalldirs when this script is in the source tree.
2033 - AM_PROG_CC_STDC is now empty. The content of this macro was
2034 merged in AC_PROG_CC. If your code uses $am_cv_prog_cc_stdc, you
2035 should adjust it to use $ac_cv_prog_cc_stdc instead. (This
2036 renaming should be safe, even if you have to support several,
2037 versions of Automake, because AC_PROG_CC defines this variable
2038 since Autoconf 2.54.)
2040 - Some users where using the undocumented ACLOCAL_M4_SOURCES
2041 variable to override the aclocal.m4 dependencies computed
2042 (inaccurately) by older versions of Automake. Because Automake
2043 now tracks configure's m4 dependencies accurately (see m4_include
2044 above), the use of ACLOCAL_M4_SOURCES should be considered
2045 obsolete and will be flagged as such when running `automake
2050 - Defining programs conditionally using Automake conditionals no
2051 longer leads to a combinatorial explosion. The following
2052 construct used to be troublesome when used with dozens of
2067 Likewise for _SOURCES, _LDADD, and _LIBADD variables.
2069 - Due to implementation constraints, previous versions of Automake
2070 proscribed multiple conditional definitions of some variables
2080 All _PROGRAMS, _LDADD, and _LIBADD variables were affected.
2081 This restriction has been lifted, and these variables now
2082 support multiple conditional definitions as do other variables.
2084 - Cleanup the definitions of $(distdir) and $(top_distdir).
2085 $(top_distdir) now points to the root of the distribution
2086 directory created during `make dist', as it did in Automake 1.4,
2087 not to the root of the build tree as it did in intervening
2088 versions. Furthermore these two variables are now only defined in
2089 the top level Makefile, and passed to sub-directories when running
2092 - The --no-force option now correctly checks the Makefile.in's
2093 dependencies before deciding not to update it.
2095 - Do not assume that make files are called Makefile in cleaning rules.
2097 - Update .info files in the source tree, not in the build tree. This
2098 is what the GNU Coding Standard recommend. Only Automake 1.7.x
2099 used to update these files in the build tree (previous versions did
2100 it in the source tree too), and it caused several problems, varying
2101 from mere annoyance to portability issues.
2103 - COPYING, COPYING.LIB, and COPYING.LESSER are no longer overwritten
2104 when --add-missing and --force-missing are used. For backward
2105 compatibility --add-missing will continue to install COPYING (in
2106 `gnu' strictness) when none of these three files exist, but this
2107 use is deprecated: you should better choose a license yourself and
2108 install it once for all in your source tree (and in your code
2111 - Fix ylwrap so that it does not overwrite header files that haven't
2112 changed, as the inline rule already does.
2114 - User-defined rules override automake-defined rules for the same
2115 targets, even when rules do not have commands. This is not new
2116 (and was documented), however some of the automake-generated
2117 rules have escaped this principle in former Automake versions.
2118 Rules for the following targets are affected by this fix:
2120 clean, clean-am, dist-all, distclean, distclean-am, dvi, dvi-am,
2121 info, info-am, install-data-am, install-exec-am, install-info,
2122 install-info-am, install-man, installcheck-am, maintainer-clean,
2123 maintainer-clean-am, mostlyclean, mostlyclean-am, pdf, pdf-am,
2124 ps, ps-am, uninstall-am, uninstall-info, uninstall-man
2126 Practically it means that an attempt to supplement the dependencies
2127 of some target, as in
2129 clean: my-clean-rule
2131 will now *silently override* the automake definition of the
2132 rule for this target. Running `automake -Woverride' will diagnose
2133 all such overriding definitions.
2135 It should be noted that almost all of these targets support a *-local
2136 variant that is meant to supplement the automake-defined rule
2137 (See node `Extending' in the manual). The above rule should
2140 clean-local: my-clean-rule
2142 These *-local targets have been documented since at least
2143 Automake 1.2, so you should not fear the change if you have
2144 to support multiple automake versions.
2148 - The Automake manual is now distributed under the terms of the GNU FDL.
2150 - Targets dist-gzip, dist-bzip2, dist-tarZ, dist-zip are always defined.
2152 - core dumps are no longer removed by the cleaning rules. There are
2153 at least three reasons for this:
2154 1. These files should not be created by any build step,
2155 so their removal do not fit any of the cleaning rules.
2156 Actually, they may be precious to the developer.
2157 2. If such file is created during a build, then it's clearly a
2158 bug Automake should not hide. Not removing the file will
2159 cause `make distcheck' to complain about its presence.
2160 3. Operating systems have different naming conventions for
2161 core dump files. A core file on one system might be a
2162 completely legitimate data file on another system.
2164 - RUNTESTFLAGS, CTAGSFLAGS, ETAGSFLAGS, JAVACFLAGS are no longer
2165 defined by Automake. This means that any definition in the
2166 environment will be used, unless overridden in the Makefile.am or
2167 on the command line. The old behavior, where these variables were
2168 defined empty in each Makefile, can be obtained by AC_SUBSTing or
2169 AC_ARG_VARing each variable from configure.ac.
2171 - CONFIGURE_DEPENDENCIES and CONFIG_STATUS_DEPENDENCIES are now
2172 documented. (The is not a new feature, these variables have
2173 been there since at least Automake 1.4.)
2175 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2177 Bugs fixed in 1.7.9:
2178 * Fix install-strip to work with nobase_ binaries.
2179 * Fix renaming of #line directives in ylwrap.
2180 * Rebuild with Autoconf 2.59. (1.7.8 was not installable with pdksh.)
2182 Bugs fixed in 1.7.8:
2183 * Remove spurious blank lines in cleaning rules introduced in 1.7.7.
2184 * Fix detection of Debian's install-info, broken since version 1.5.
2185 (Debian bug #213524).
2186 * Honor -module if it appears in AM_LDFLAGS (i.e., relax name checking)
2187 This was only done for libfoo_LDFLAGS and LDFLAGS in previous versions.
2189 Bugs fixed in 1.7.7:
2190 * The implementation of automake's --no-force option is unreliable,
2191 so this option is ignored in this version. A real fix will appear in
2192 Automake 1.8. (Debian Bug #206299)
2193 * AM_PATH_PYTHON: really check the whole list of interpreters if no
2194 argument is given. (PR/399)
2195 * Do not warn about leading `_' in variable names, even with -Wportability.
2196 * Support user redefinitions of TEXINFO_TEX.
2197 * depcomp: support AIX Compiler version 6.
2198 * Fix missing rebuilds during `make dist' with BSD make.
2199 (Could produce tarballs containing out-of-date files.)
2200 * Resurrect multilib support.
2201 * Noteworthy manual updates:
2202 - Extending aclocal: how to write m4 macros that won't trigger warnings
2204 - A Shared Library: Rewrite and split into subsections.
2206 Bugs fixed in 1.7.6:
2207 * Fix depcomp's icc mode for ICC 7.1.
2208 * Diagnose calls to AC_CONFIG_FILES and friends with not enough arguments.
2209 * Fix maintainer-clean's removal of autom4te.cache in VPATH builds.
2210 * Fix AM_PATH_LISPDIR to work with POSIXLY_CORRECT=1.
2211 * Fix the location reported in some diagnostics related to AUTOMAKE_OPTIONS.
2212 * Remove Latin-1 characters from elisp-comp.
2213 * Update the manual's @dircategory to match the Free Software Directory.
2215 Bugs fixed in 1.7.5:
2216 * Update install-sh's license to remove an advertising clause.
2217 (Debian bug #191717)
2218 * Fix a bug introduced in 1.7.4, related to BUILT_SOURCE handling,
2219 that caused invalid Makefile.ins to be generated.
2220 * Make sure AM_MAKE_INCLUDE doesn't fail when a `doit' file exists.
2221 * New FAQ entry: renamed objects.
2223 Bugs fixed in 1.7.4:
2224 * Tweak the TAGS rule to support Exuberant Ctags (in addition to
2225 the Emacs implementation)
2226 * Fix output of aclocal.m4 dependencies in subdirectories.
2227 * Use `mv -f' instead of `mv' in fastdep rules.
2228 * Upgrade mdate-sh to work on OS/2.
2229 * Don't byte-compile elisp files when ELCFILES is set empty.
2230 (this documented feature was broken by 1.7.3)
2231 * Diagnose trailing backslashes on last line of Makefile.am.
2232 * Diagnose whitespace following trailing backslashes.
2233 * Multiple tests are now correctly supported in DEJATOOL. (PR/388)
2234 * Fix rebuilt rules for AC_CONFIG_FILES([Makefile:Makefile.in:Makefile.bot])
2236 * `make install' will build `BUILT_SOURCES' first.
2237 * Minor documentation fixes.
2239 Bugs fixed in 1.7.3:
2240 * Fix stamp files numbering (when using multiple AC_CONFIG_HEADERS).
2241 * Query distutils for `pythondir' and `pythonexecdir', instead of
2242 using an hardcoded path. This should allow builds on 64-bit
2243 distributions that usually use lib64/ instead of lib/.
2244 * AM_PATH_PYTHON will also search for python2.3.
2245 * elisp files are now built all at once instead of one by one. Besides
2246 incurring a speed-up, this is required to support interdependent elisp files.
2247 * Support for DJGPP:
2248 - `make distcheck' will now work in `_inst/' and `_build' instead
2249 of `=inst/' and `=build/'
2250 - use `_dirstamp' when the file-system doesn't support `.dirstamp'
2251 - install/uninstall `*.i[0-9][0-9]'-style info files
2252 - more changes that affect only the Automake package (not its output)
2253 * Fix some incompatibilities with upcoming perl-5.10.
2254 * Properly quote AC_PACKAGE_TARNAME and AC_PACKAGE_VERSION when defining
2255 PACKAGE and VERSION.
2257 - dashmstdout and dashXmstdout modes: don't use `-o /dev/null', this
2258 is troublesome with gcc and Solaris compilers. (PR/385)
2259 - makedepend mode: work with Libtool. (PR/385 too)
2261 * better support for unusual gettext setups, such as multiple po/ directories
2263 - Flag missing po/ and intl/ directories as warnings, not errors.
2264 - Disable these warnings if po/ does not exist.
2265 * Noteworthy manual updates:
2267 - Document how AC_CONFIG_AUX_DIR interacts with missing files.
2269 - Document `AM_YFLAGS = -d'. (PR/382)
2271 Bugs fixed in 1.7.2:
2272 * Fix installation and uninstallation of Info files built in subdirectories.
2273 * Do not run `./configure --with-included-gettext' during `make distcheck'
2274 if AM_GNU_GETTEXT([external]) is used.
2275 * Correctly uninstall renamed man pages.
2276 * Do not strip escaped newline in variables defined in one condition
2277 and augmented in another condition.
2278 * Fix ansi2knr rules for LIBOBJS sources.
2279 * Clean all known Texinfo index files, not only those which appear to
2280 be used, because we cannot know which indexes are used in included files.
2281 (PR/375, Debian Bug #168671)
2282 * Honor only the first @setfilename seen in a Texinfo file.
2283 * Treat "required file X not found" diagnostics as errors (exit status 1).
2284 * Don't complain that a required file is not found when it is a Makefile
2286 * Don't use single suffix inference rules when building `.info'-less
2287 Info files, for the sake of Solaris make.
2288 * The `check' target now depends on `$(BUILT_SOURCES)'. (PR/359)
2289 * Recognize multiple inference rules such as `.a.b .c.d:'. (PR/371)
2290 * Warn about multiple inference rules when -Wportability is used. (PR/372)
2291 * Fix building of deansified files from subdirectories. (PR/370)
2292 * Add missing `fi' in the .c->.obj rules.
2293 * Improve install-sh to work even when names contain spaces or certain
2294 (but not all) shell metachars.
2295 * Fix the following spurious failures in the test suite:
2296 depcomp2.test, gnits2.test, gnits3.test, python3.test, texinfo13.test
2297 * Noteworthy manual updates:
2298 - Augment the section about BUILT_SOURCES.
2299 - Mention that AM_PROG_CC_STDC is a relic that is better avoided today.
2301 Bugs fixed in 1.7.1:
2302 * Honor `ansi2knr' for files built in subdirectories, or using per-targets
2304 * Aclocal should now recognize macro names containing parentheses, e.g.
2305 AC_DEFUN([AC_LANG_PREPROC(Fortran 90)], [...]).
2306 * Erase *.sum and *.log files created by DejaGnu, during `make distclean'.
2308 * Install Python files even if they were built. (PR/369)
2309 * Have stamp-vti dependent upon configure instead of configure.ac, as the
2310 version might not be defined in the latter. (PR/358)
2311 * Reorder arguments passed to a couple of commands, so things works
2312 when POSIXLY_CORRECT=1.
2313 * Fix a regex that can cause Perl to segfault on large input.
2315 * Fix distribution of packages that have some sources defined conditionally,
2316 as in the `Conditional compilation using Automake conditionals' example
2318 * Fix spurious test suite failures on IRIX.
2319 * Don't report a required variable as undefined if it has been
2320 defined conditionally for the "right" conditions.
2321 * Fix cleaning of the /tmp subdirectory used by `make distcheck', in case
2322 `make distcheck' fails.
2323 * Fix distribution of included Makefile fragment, so we don't create
2324 spurious directories in the distribution. (PR/366)
2325 * Don't complain that a target lacks `.$(EXEEXT)' when it has it.
2328 * Autoconf 2.54 is required.
2329 * `aclocal' and `automake' will no longer warn about obsolete
2330 configure macros. This is done by `autoconf -Wobsolete'.
2331 * AM_CONFIG_HEADER, AM_SYS_POSIX_TERMIOS and
2332 AM_HEADER_TIOCGWINSZ_NEEDS_SYS_IOCTL are obsolete (although still
2333 supported). You should use AC_CONFIG_HEADERS, AC_SYS_POSIX_TERMIOS,
2334 and AC_HEADER_TIOCGWINSZ instead. `autoupdate' can upgrade
2335 `configure.ac' for you.
2336 * Support for per-program and per-library `_CPPFLAGS'.
2337 * New `ctags' target (builds CTAGS files).
2338 * Support for -Wmumble and -Wno-mumble, where mumble is a warning category
2339 (see `automake --help' or the manual for a list of them).
2340 * Honor the WARNINGS environment variable.
2341 * Omit the call to depcomp when using gcc3: call the compiler directly.
2342 * A new option, std-options, tests that programs support --help and --version
2343 when `make installcheck' is run. This is enabled by --gnits.
2344 * Texinfo rules now support the `ps' and `pdf' targets.
2345 * Info files are now created in the build directory, not the source directory.
2346 * info_TEXINFOS supports files in subdirectories (this requires Texinfo 4.1
2348 * `make distcheck' will enforce DESTDIR support by attempting
2350 * `+=' can be used in conditionals, even if the augmented variable
2351 was defined for another condition.
2352 * Makefile fragments (inserted with `include') are always distributed.
2353 * Use Autoconf's --trace interface to inspect configure.ac and get
2354 a more accurate view of it.
2355 * Add support for extending aclocal's default macro search path
2356 using a `dirlist' file within the aclocal directory.
2357 * automake --output-dir is deprecated.
2358 * The part of the distcheck target that checks whether uninstall actually
2359 removes all installed files has been moved in a separate target,
2360 distuninstallcheck, so it can be overridden easily.
2364 * Support for AM_INIT_GETTEXT([external])
2365 * Bug fixes, including:
2366 - Fix Automake's own `make install' so it works even if `ln' doesn't.
2367 - nobase_ programs and scripts honor --program-transform correctly.
2368 - Erase configure.lineno during `make distclean'.
2369 - Erase YACC and LEX outputs during `make maintainer-clean'.
2372 * Many bug fixes, including:
2373 - Requiring the current version works.
2374 - Fix "$@" portability issues (for Zsh).
2375 - Fix output of dummy dependency files in presence of post-processed
2377 - Don't compute dependencies in background to avoid races with libtool.
2378 - Fix handling of _OBJECTS variables for targets sharing source variables.
2379 - Check dependency mode for Java when AM_PROG_GCJ is used.
2382 * automake --output-dir is deprecated
2383 * Many bug fixes, including:
2384 - Don't choke on AM_LDFLAGS definitions.
2385 - Clean libtool objects from subdirectories.
2386 - Allow configure variables with reserved suffix and unknown prefix
2387 (e.g. AC_SUBST(mumble_LDFLAGS) when 'mumble' is not a target).
2388 - Fix the definition of AUTOMAKE and ACLOCAL in configure.
2391 * Autoconf 2.52 is required.
2392 * automake no longer run libtoolize.
2393 This is the job of autoreconf (from GNU Autoconf).
2394 * `dist' generates all the archive flavors, as did `dist-all'.
2395 * `dist-gzip' generates the Gzip tar file only.
2396 * Combining Automake Makefile conditionals no longer lead to a combinatorial
2397 explosion. Makefile.in's keep a reasonable size.
2398 * AM_FUNC_ERROR_AT_LINE, AM_FUNC_STRTOD, AM_FUNC_OBSTACK, AM_PTRDIFF_T
2399 are no longer shipped, since Autoconf 2.52 provides them (both as AM_
2401 * `#line' of Lex and Yacc files are properly set.
2402 * EXTRA_DIST can contain generated directories.
2403 * Support for dot-less extensions in suffix rules.
2404 * The part of the distcheck target that checks whether distclean actually
2405 cleans all built files has been moved in a separate target, distcleancheck,
2406 so it can be overridden easily.
2407 * `make distcheck' will pass additional options defined in
2408 $(DISTCHECK_CONFIGURE_FLAGS) to configure.
2409 * Fixed CDPATH portability problems, in particular for MacOS X.
2410 * Fixed handling of nobase_ targets.
2411 * Fixed support of implicit rules leading to .lo objects.
2412 * Fixed late inclusion of --add-missing files (e.g. depcomp) in DIST_COMMON
2413 * Added uninstall-hook target
2414 * `AC_INIT AM_INIT_AUTOMAKE(tarname,version)' is an obsolete construct.
2415 You can now use `AC_INIT(pkgname,version) AM_INIT_AUTOMAKE' instead.
2416 (Note that "pkgname" is not "tarname", see the manual for details.)
2417 It is also possible to pass a list of global Automake options as
2418 first argument to this new form of AM_INIT_AUTOMAKE.
2419 * Compiler-based assembler is now called `CCAS'; people expected `AS'
2420 to be a real assembler.
2421 * AM_INIT_AUTOMAKE will set STRIP itself when it needs it. Adding
2422 AC_CHECK_TOOL([STRIP], [strip]) manually is no longer required.
2423 * aclocal and automake are also installed with the version number
2424 appended, and some of the install directory names have changed.
2425 This lets you have multiple versions installed simultaneously.
2426 * Support for parsers and lexers in subdirectories.
2429 * Support for `configure.ac'.
2430 * Support for `else COND', `endif COND' and negated conditions `!COND'.
2431 * `make dist-all' is much faster.
2432 * Allows '@' AC_SUBSTs in macro names.
2433 * Faster AM_INIT_AUTOMAKE (requires update of `missing' script)
2434 * User-side dependency tracking. Developers no longer need GNU make
2436 * Uses DIST_SUBDIRS in some situations when SUBDIRS is conditional
2437 * Most files are correctly handled if they appear in subdirs
2438 For instance, a _DATA file can appear in a subdir
2439 * GNU tar is no longer required for `make dist'
2440 * Added support for `dist_' and `nodist_' prefixes
2441 * Added support for `nobase_' prefix
2442 * Compiled Java support
2443 * Support for per-executable and per-library compilation flags
2447 * Added support for the Fortran 77 programming language.
2448 * Re-indexed the Automake Texinfo manual.
2449 * Added `AM_FOOFLAGS' variable for each compiler invocation;
2450 e.g. AM_CFLAGS can be used in Makefile.am to set C compiler flags
2451 * Support for latest autoconf, including support for objext
2452 * Can now put `.' in SUBDIRS to control build order
2453 * `include' command and `+=' support for macro assignment
2454 * Dependency tracking no long susceptible to deleted header file problem
2455 * Maintainer mode now a conditional. @MAINT@ is now an anachronism.
2460 * Better Cygwin32 support
2461 * Support for suffix rules with _SOURCES variables
2462 * New options `readme-alpha' and `check-news'; Gnits mode sets these
2463 * @LEXLIB@ no longer required when lex source seen
2464 Lex support in `missing', and new lex macro. Update your missing script.
2465 * Built-in support for assembly
2466 * aclocal gives error if `AM_' macro not found
2467 * Passed YFLAGS, not YACCFLAGS, to yacc
2468 * AM_PROG_CC_STDC does not have to come before AC_PROG_CPP
2469 * Dependencies computed as a side effect of compilation
2470 * Preliminary support for Java
2471 * DESTDIR support at "make install" time
2472 * Improved ansi2knr support; you must use the latest ansi2knr.c (included)
2476 * Better DejaGnu support
2477 * Added no-installinfo option
2478 * Added Emacs Lisp support
2479 * Added --no-force option
2480 * Included `aclocal' program
2481 * Automake will now generate rules to regenerate aclocal.m4, if appropriate
2482 * Now uses `AM_' macro names everywhere
2483 * ansi2knr option can have directory prefix (eg `../lib/ansi2knr')
2484 ansi2knr now works correctly on K&R sources
2485 * Better C++, yacc, lex support
2486 * Will compute _DEPENDENCIES variables automatically if not supplied
2487 * Will interpolate $(...) and ${...} when examining contents of a variable
2488 * .deps files now in build directory, not source directory; dependency
2489 handling generally rewritten
2490 * DATA, MANS and BUILT_SOURCES no longer included in distribution
2491 * can now put config.h into a subdir
2492 * Added dist-all target
2493 * Support for install-info program (see texinfo 3.9)
2494 * Support for "yacc -d"
2495 * configure substitutions are automatically discovered and included
2496 in generated Makefile.in
2497 * Special --cygnus mode
2498 * OMIT_DEPENDENCIES can now hold list of dependencies to be omitted
2499 when making distribution. Some dependencies are auto-ignored.
2500 * Changed how libraries are specified in _LIBRARIES variable
2501 * Full libtool support, from Gord Matzigkeit
2502 * No longer have to explicitly touch stamp-h when using AC_CONFIG_HEADER;
2503 AM_CONFIG_HEADER handles it automatically
2504 * Texinfo output files no longer need .info extension
2505 * Added `missing' support
2507 * Conditionals in Makefile.am, from Ian Taylor
2511 * distcheck target runs install and installcheck targets
2512 * Added preliminary support for DejaGnu.
2517 * More libtool fixes from Gord Matzigkeit; libtool support is still
2519 * Added support for jm_MAINTAINER_MODE
2521 * New "distcheck" target
2525 * mkinstalldirs and mdate-sh now appear in directory specified by
2527 * Removed DIST_SUBDIRS, DIST_OTHER
2528 * AC_ARG_PROGRAM only required when an actual program exists
2529 * dist-hook target now run before distribution packaged up; idea from
2530 Dieter Baron. Other hooks exist, too.
2531 * Preliminary (unfinished) support for libtool
2532 * Added short option names.
2533 * Better "dist" support when gluing together multiple packages
2537 * Documentation updates (many from François Pinard)
2538 * strictness `normal' now renamed to `foreign'
2539 * Renamed --install-missing to --add-missing
2540 * Now handles AC_CONFIG_AUX_DIR
2541 * Now handles TESTS macro
2542 * DIST_OTHER renamed to EXTRA_DIST
2543 * DIST_SUBDIRS is deprecated
2544 * @ALLOCA@ and @LIBOBJS@ now work in _LDADD variables
2545 * Better error messages in many cases
2546 * Program names are canonicalized
2547 * Added "check" prefix; from Gord Matzigkeit
2551 * configure.in scanner knows about AC_PATH_XTRA, AC_OUTPUT ":" syntax
2552 * Beginnings of a test suite
2553 * Automatically adds -I options for $(srcdir), ".", and path to config.h
2554 * Doesn't print anything when running
2555 * Beginnings of MAINT_CHARSET support
2556 * Can specify version in AUTOMAKE_OPTIONS
2557 * Most errors recognizable by Emacs' M-x next-error
2558 * Added --verbose option
2559 * All "primary" variables now obsolete; use EXTRA_PRIMARY to supply
2560 configure-generated names
2561 * Required macros now distributed in aclocal.m4
2563 * --strictness=gnu is default
2567 * More sophisticated configure.in scanning; now understands ALLOCA and
2568 LIBOBJS directly, handles AC_CONFIG_HEADER more precisely, etc.
2569 * TEXINFOS and MANS now obsolete; use info_TEXINFOS and man_MANS instead.
2570 * CONFIG_HEADER variable now obsolete
2571 * Can handle multiple Texinfo sources
2572 * Allow hierarchies deeper than 2. From Gord Matzigkeit.
2573 * HEADERS variable no longer needed; now can put .h files directly into
2574 foo_SOURCES variable.
2575 * Automake automatically rebuilds files listed in AC_OUTPUT. The
2576 corresponding ".in" files are included in the distribution.
2579 * Added --gnu and --gnits options
2580 * More standards checking
2582 * Cleaned up 'dist' targets
2583 * Added AUTOMAKE_OPTIONS variable and several options
2584 * Now scans configure.in to get some information (preliminary)
2587 * Works with Perl 4 again
2590 * Added --install-missing option.
2591 * Pretty-prints generated macros and rules
2592 * Comments in Makefile.am are placed more intelligently in Makefile.in
2593 * Generates .PHONY target
2594 * Rule or macro in Makefile.am now overrides contents of Automake file
2595 * Substantial cleanups from François Pinard
2599 * Works with Perl 4 again.
2602 * New uniform naming scheme.
2603 * --strictness option
2605 * '.c' files corresponding to '.y' or '.l' files are automatically
2607 * Many bug fixes and cleanups
2610 * Allow objects to be conditionally included in libraries via lib_LIBADD.
2613 * Bug fixes in 'clean' code.
2614 * Now generates 'installdirs' target.
2615 * man page installation reworked.
2616 * 'make dist' no longer re-creates all Makefile.in's.
2619 * Reimplemented in Perl
2620 * Added --amdir option (for debugging)
2621 * Texinfo support cleaned up.
2622 * Automatic de-ANSI-fication cleaned up.
2623 * Cleaned up 'clean' targets.
2626 * Automatic dependency tracking
2627 * More documentation
2628 * New variables DATA and PACKAGEDATA
2629 * SCRIPTS installed using $(INSTALL_SCRIPT)
2630 * No longer uses double-colon rules
2632 * Changes in advance of internationalization
2636 Copyright (C) 1995-2013 Free Software Foundation, Inc.
2638 This program is free software; you can redistribute it and/or modify
2639 it under the terms of the GNU General Public License as published by
2640 the Free Software Foundation; either version 2, or (at your option)
2643 This program is distributed in the hope that it will be useful,
2644 but WITHOUT ANY WARRANTY; without even the implied warranty of
2645 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
2646 GNU General Public License for more details.
2648 You should have received a copy of the GNU General Public License
2649 along with this program. If not, see <http://www.gnu.org/licenses/>.