2 # Makefile for directory with subdirs to build.
3 # Copyright (C) 1990, 1991, 1992, 1993 Free Software Foundation
5 # This file is free software; you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation; either version 2 of the License, or
8 # (at your option) any later version.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program; if not, write to the Free Software
17 # Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
24 exec_prefix = $(prefix)
25 bindir = $(exec_prefix)/bin
26 libdir = $(exec_prefix)/lib
27 tooldir = $(exec_prefix)/$(target)
29 program_transform_name =
31 datadir = $(prefix)/lib
32 mandir = $(prefix)/man
33 man1dir = $(mandir)/man1
34 man2dir = $(mandir)/man2
35 man3dir = $(mandir)/man3
36 man4dir = $(mandir)/man4
37 man5dir = $(mandir)/man5
38 man6dir = $(mandir)/man6
39 man7dir = $(mandir)/man7
40 man8dir = $(mandir)/man8
41 man9dir = $(mandir)/man9
42 infodir = $(prefix)/info
43 includedir = $(prefix)/include
44 docdir = $(datadir)/doc
49 INSTALL_PROGRAM = $(INSTALL)
50 INSTALL_DATA = $(INSTALL)
57 # start-sanitize-chill
58 CHILLFLAGS = $(CFLAGS)
69 # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove.
70 BISON = `if [ -f $${rootme}/byacc/byacc ] ; \
71 then echo $${rootme}/byacc/byacc ; \
75 LEX = `if [ -f $${rootme}/flex/flex ] ; \
76 then echo $${rootme}/flex/flex ; \
79 MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \
80 then echo $${rootme}/texinfo/makeinfo/makeinfo ; \
81 else echo makeinfo ; fi`
83 EXPECT = `if [ -f $${rootme}/expect/expect ] ; \
84 then echo $${rootme}/expect/expect ; \
85 else echo expect ; fi`
87 RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \
88 then echo $${srcroot}/dejagnu/runtest ; \
89 else echo runtest ; fi`
92 # libraries that may need to be augmented on a system-by-system basis
95 # compilers to use to create programs which must be run in the build
98 CXX_FOR_BUILD = $(CXX)
100 SUBDIRS = "this is set via configure, don't edit this"
104 INSTALL_TARGET = install.all
107 if [ -f $${rootme}/gcc/Makefile ] ; then \
108 echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
110 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
113 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
117 # start-sanitize-chill
118 CHILL_FOR_TARGET = ` \
119 if [ -f $${rootme}/gcc/Makefile ] ; then \
120 echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \
122 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
125 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
132 if [ -f $${rootme}/gcc/Makefile ] ; then \
133 echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \
135 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
138 t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \
143 if [ -f $${rootme}/gas/Makefile ] ; then \
144 echo $${rootme}/gas/as.new ; \
146 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
149 t='$(program_transform_name)'; echo as | sed -e '' $$t ; \
154 if [ -f $${rootme}/binutils/Makefile ] ; then \
155 echo $${rootme}/binutils/ar ; \
157 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
160 t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \
164 RANLIB_FOR_TARGET = ` \
165 if [ -f $${rootme}/binutils/Makefile ] ; then \
166 echo $${rootme}/binutils/ranlib ; \
168 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
171 t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \
176 if [ -f $${rootme}/binutils/Makefile ] ; then \
177 echo $${rootme}/binutils/nm ; \
179 if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
182 t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \
186 # FIXME: This is badly named.
188 if [ -f $${rootme}/gcc/Makefile ] ; then \
189 if [ -f $${rootme}/newlib/Makefile ] ; then \
190 echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \
192 echo -I$${rootme}/gcc/include ; \
200 #### host and target specific makefile fragments come in here.
203 # Flags to pass down to all sub-makes.
204 # Please keep these in alphabetical order.
205 BASE_FLAGS_TO_PASS = \
206 "AR_FLAGS=$(AR_FLAGS)" \
207 "AR_FOR_TARGET=$(AR_FOR_TARGET)" \
208 "AS_FOR_TARGET=$(AS_FOR_TARGET)" \
210 "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
211 "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
213 $(start-sanitize-chill)\
214 "CHILLFLAGS=$(CHILLFLAGS)" \
215 "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
216 "CHILL_LIB=$(CHILL_LIB)" \
217 $(end-sanitize-chill)\
218 "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
219 "CXXFLAGS=$(CXXFLAGS)" \
220 "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \
221 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \
222 "INSTALL=$(INSTALL)" \
223 "INSTALL_DATA=$(INSTALL_DATA)" \
224 "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
225 "LDFLAGS=$(LDFLAGS)" \
227 "LOADLIBES=$(LOADLIBES)" \
228 "MAKEINFO=$(MAKEINFO)" \
229 "MUNCH_NM=$(MUNCH_NM)" \
230 "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
232 "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
234 "RUNTEST=$(RUNTEST)" \
235 "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
236 "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \
237 "exec_prefix=$(exec_prefix)" \
241 # Flags to pass down to most sub-makes, in which we're building with
242 # the host environment.
243 # If any variables are added here, they must be added to do-*, below.
253 FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
255 # Flags that are concerned with the location of the X11 include files
257 X11_FLAGS_TO_PASS = \
258 "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \
259 "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \
262 # Flags to pass down to makes which are built with the target environment.
263 # The double $ decreases the length of the command line; the variables
264 # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
265 # If any variables are added here, they must be added to do-*, below.
266 EXTRA_TARGET_FLAGS = \
267 'AR=$$(AR_FOR_TARGET)' \
268 'AS=$$(AS_FOR_TARGET)' \
269 'CC=$$(CC_FOR_TARGET)' \
270 'CXX=$$(CXX_FOR_TARGET)' \
271 'NM=$$(NM_FOR_TARGET)' \
272 'RANLIB=$$(RANLIB_FOR_TARGET)' \
273 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)'
275 TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
277 # Flags to pass down to gcc. gcc builds a library, libgcc.a, so it
278 # unfortunately needs the native compiler and the target ar and
280 # If any variables are added here, they must be added to do-*, below.
281 # The HOST_* variables are a special case, which are used for the gcc
282 # cross-building scheme.
283 HOST_CC = $(CC_FOR_BUILD)
285 HOST_PREFIX_1 = loser-
287 'AR=$$(AR_FOR_TARGET)' \
291 'HOST_CC=$(CC_FOR_BUILD)' \
292 'HOST_PREFIX=$(HOST_PREFIX)' \
293 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
295 'RANLIB=$$(RANLIB_FOR_TARGET)' \
298 GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
300 # This is a list of the targets for all of the modules which are compiled
301 # using $(FLAGS_TO_PASS).
347 # This is a list of the check targets for all of the modules which are
348 # compiled using $(FLAGS_TO_PASS).
394 # This is a list of the install targets for all of the modules which are
395 # compiled using $(FLAGS_TO_PASS).
442 # This is a list of the targets for all of the modules which are compiled
443 # using $(X11_FLAGS_TO_PASS).
450 # This is a list of the check targets for all of the modules which are
451 # compiled using $(X11_FLAGS_TO_PASS).
452 CHECK_X11_MODULES = \
458 # This is a list of the install targets for all the modules which are
459 # compiled using $(X11_FLAGS_TO_PASS).
460 INSTALL_X11_MODULES = \
466 # This is a list of the targets for all of the modules which are compiled
467 # using $(TARGET_FLAGS_TO_PASS).
468 ALL_TARGET_MODULES = \
469 $(start-sanitize-chill) \
471 $(end-sanitize-chill) \
476 # This is a list of the check targets for all of the modules which are
477 # compiled using $(TARGET_FLAGS_TO_PASS).
478 CHECK_TARGET_MODULES = \
479 $(start-sanitize-chill) \
481 $(end-sanitize-chill) \
486 # This is a list of the install targets for all of the modules which are
487 # compiled using $(TARGET_FLAGS_TO_PASS).
488 INSTALL_TARGET_MODULES = \
489 $(start-sanitize-chill) \
491 $(end-sanitize-chill) \
496 # This is a shell case of all modules which are compiled using
497 # $(TARGET_FLAGS_TO_PASS), used in the do-X rule.
498 TARGET_LIBS = libg++ | newlib | xiberty
499 # start-sanitize-chill
500 TARGET_LIBS = chillrt | libg++ | newlib | xiberty
503 # The first rule in the file had better be this one. Don't put any above it.
507 # The target built for a native build.
511 $(ALL_TARGET_MODULES) \
515 # The target built for a cross build.
532 $(ALL_TARGET_MODULES)
534 # Do a target for all the subdirectories. A ``make do-X'' will do a
535 # ``make X'' in all subdirectories (because, in general, there is a
536 # dependency (below) of X upon do-X, a ``make X'' will also do this,
537 # but it may do additional work as well).
538 # This target ensures that $(BASE_FLAGS_TO_PASS) appears only once,
539 # because it is so large that it can easily overflow the command line
540 # length limit on some systems.
552 @target=`echo $@ | sed -e 's/^do-//'`; \
553 rootme=`pwd`; export rootme; \
554 srcroot=`cd $(srcdir); pwd`; export srcroot; \
555 for i in $(SUBDIRS); do \
556 if [ -f ./$$i/Makefile ]; then \
559 for flag in $(EXTRA_TARGET_FLAGS); do \
560 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
564 for flag in $(EXTRA_GCC_FLAGS); do \
565 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
569 for flag in $(EXTRA_HOST_FLAGS); do \
570 eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \
574 export AR AS CC CXX NM RANLIB XTRAFLAGS; \
576 $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
577 "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \
578 "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \
580 then true; else exit 1; fi; \
584 # Here are the targets which correspond to the do-X targets.
586 .PHONY: info installcheck dvi install-info
587 .PHONY: clean distclean mostlyclean realclean local-clean local-distclean
589 installcheck: do-installcheck
592 install-info: install-info-dirs do-install-info dir.info
593 if [ -f dir.info ] ; then \
594 $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \
597 do-install-info: install-info-dirs
600 -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E
603 -rm -f Makefile config.status
605 clean: do-clean local-clean
606 mostlyclean: do-mostlyclean local-clean
607 distclean: do-distclean local-clean local-distclean
608 realclean: do-realclean local-clean local-distclean
613 check: $(CHECK_MODULES) \
614 $(CHECK_TARGET_MODULES) \
615 $(CHECK_X11_MODULES) \
618 # Installation targets.
620 .PHONY: install uninstall
621 install: $(INSTALL_TARGET)
624 @echo "the uninstall target is not supported in this tree"
627 install.all: install-no-fixedincludes
628 @if [ -f ./gcc/Makefile ] ; then \
629 rootme=`pwd` ; export rootme ; \
631 $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \
636 # install-no-fixedincludes is used because Cygnus can not distributed
637 # the fixed header files.
638 .PHONY: install-no-fixedincludes
639 install-no-fixedincludes: \
641 gcc-no-fixedincludes \
643 $(INSTALL_TARGET_MODULES) \
644 $(INSTALL_X11_MODULES)
646 # Install the gcc headers files, but not the fixed include files,
647 # which Cygnus is not allowed to distribute. This rule is very
648 # dependent on the workings of the gcc Makefile.in.
649 .PHONY: gcc-no-fixedincludes
650 gcc-no-fixedincludes:
651 @if [ -f ./gcc/Makefile ]; then \
652 rm -rf gcc/tmp-include; \
653 mv gcc/include gcc/tmp-include 2>/dev/null; \
655 touch gcc/stmp-fixinc; \
656 rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \
657 rootme=`pwd`; export rootme; \
658 srcroot=`cd $(srcdir); pwd` ; export srcroot; \
660 $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
661 rm -rf gcc/include; \
662 mv gcc/tmp-include gcc/include 2>/dev/null; \
665 .PHONY: install.cross
682 $(INSTALL_TARGET_MODULES)
684 # This rule is used to build the modules which use FLAGS_TO_PASS. To
685 # build a target all-X means to cd to X and make all.
686 # all-glob is handled specially because it doesn't actually build.
687 .PHONY: $(ALL_MODULES) all-glob
688 $(ALL_MODULES) all-glob:
689 @dir=`echo $@ | sed -e 's/all-//'`; \
690 if [ -f ./$${dir}/Makefile ] ; then \
691 rootme=`pwd`; export rootme; \
692 srcroot=`cd $(srcdir); pwd`; export srcroot; \
693 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \
698 # This rule is used to check the modules which use FLAGS_TO_PASS. To
699 # build a target check-X means to cd to X and make all.
700 .PHONY: $(CHECK_MODULES)
702 @dir=`echo $@ | sed -e 's/check-//'`; \
703 if [ -f ./$${dir}/Makefile ] ; then \
704 rootme=`pwd`; export rootme; \
705 srcroot=`cd $(srcdir); pwd`; export srcroot; \
706 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \
711 # This rule is used to install the modules which use FLAGS_TO_PASS.
712 # To build a target install-X means to cd to X and make install.
713 .PHONY: $(INSTALL_MODULES)
714 $(INSTALL_MODULES): install-dirs
715 @dir=`echo $@ | sed -e 's/install-//'`; \
716 if [ -f ./$${dir}/Makefile ] ; then \
717 rootme=`pwd`; export rootme; \
718 srcroot=`cd $(srcdir); pwd`; export srcroot; \
719 (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \
724 # This rule is used to build the modules which use TARGET_FLAGS_TO_PASS.
725 # To build a target all-X means to cd to X and make all.
726 .PHONY: $(ALL_TARGET_MODULES)
727 $(ALL_TARGET_MODULES):
728 @dir=`echo $@ | sed -e 's/all-//'`; \
729 if [ -f ./$${dir}/Makefile ] ; then \
730 rootme=`pwd`; export rootme; \
731 srcroot=`cd $(srcdir); pwd`; export srcroot; \
732 (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
737 # This rule is used to check the modules which use TARGET_FLAGS_TO_PASS.
738 # To build a target install-X means to cd to X and make install.
739 .PHONY: $(CHECK_TARGET_MODULES)
740 $(CHECK_TARGET_MODULES):
741 @dir=`echo $@ | sed -e 's/check-//'`; \
742 if [ -f ./$${dir}/Makefile ] ; then \
743 rootme=`pwd`; export rootme; \
744 srcroot=`cd $(srcdir); pwd`; export srcroot; \
745 (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \
750 # This rule is used to install the modules which use
751 # TARGET_FLAGS_TO_PASS. To build a target install-X means to cd to X
753 .PHONY: $(INSTALL_TARGET_MODULES)
754 $(INSTALL_TARGET_MODULES): install-dirs
755 @dir=`echo $@ | sed -e 's/install-//'`; \
756 if [ -f ./$${dir}/Makefile ] ; then \
757 rootme=`pwd`; export rootme; \
758 srcroot=`cd $(srcdir); pwd`; export srcroot; \
759 (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \
764 # This rule is used to build the modules which use X11_FLAGS_TO_PASS.
765 # To build a target all-X means to cd to X and make all.
766 .PHONY: $(ALL_X11_MODULES)
768 @dir=`echo $@ | sed -e 's/all-//'`; \
769 if [ -f ./$${dir}/Makefile ] ; then \
770 rootme=`pwd`; export rootme; \
771 srcroot=`cd $(srcdir); pwd`; export srcroot; \
773 $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \
778 # This rule is used to check the modules which use X11_FLAGS_TO_PASS.
779 # To build a target check-X means to cd to X and make all.
780 .PHONY: $(CHECK_X11_MODULES)
781 $(CHECK_X11_MODULES):
782 @dir=`echo $@ | sed -e 's/check-//'`; \
783 if [ -f ./$${dir}/Makefile ] ; then \
784 rootme=`pwd`; export rootme; \
785 srcroot=`cd $(srcdir); pwd`; export srcroot; \
787 $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \
792 # This rule is used to install the modules which use X11_FLAGS_TO_PASS.
793 # To build a target install-X means to cd to X and make install.
794 .PHONY: $(INSTALL_X11_MODULES)
795 $(INSTALL_X11_MODULES):
796 @dir=`echo $@ | sed -e 's/install-//'`; \
797 if [ -f ./$${dir}/Makefile ] ; then \
798 rootme=`pwd`; export rootme; \
799 srcroot=`cd $(srcdir); pwd`; export srcroot; \
801 $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \
806 # gcc is the only module which uses GCC_FLAGS_TO_PASS.
809 @if [ -f ./gcc/Makefile ] ; then \
810 rootme=`pwd`; export rootme; \
811 srcroot=`cd $(srcdir); pwd`; export srcroot; \
812 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \
819 @if [ -f ./gcc/Makefile ] ; then \
820 rootme=`pwd`; export rootme; \
821 srcroot=`cd $(srcdir); pwd`; export srcroot; \
822 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \
829 @if [ -f ./gcc/Makefile ] ; then \
830 rootme=`pwd`; export rootme; \
831 srcroot=`cd $(srcdir); pwd`; export srcroot; \
832 (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \
837 # This is a list of inter-dependencies among modules.
840 all-binutils: all-libiberty all-opcodes all-bfd all-flex
842 # start-sanitize-chill
843 all-chillrt: all-binutils all-gas all-gcc all-newlib
847 all-diff: all-libiberty
853 all-flex: all-libiberty all-byacc
854 all-gas: all-libiberty all-opcodes all-bfd
856 all-gcc: all-libiberty all-byacc all-binutils all-gas
857 all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim
859 all-gprof: all-libiberty all-bfd
861 all-gzip: all-libiberty
862 all-hello: all-libiberty
864 all-ispell: all-emacs
865 all-ld: all-libiberty all-bfd all-byacc all-flex
866 all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib
868 all-m4: all-libiberty
869 all-make: all-libiberty
871 all-newlib: all-binutils all-gas all-gcc
877 all-recode: all-libiberty
881 all-sim: all-libiberty all-bfd
882 all-tar: all-libiberty
884 all-tclX: all-tcl all-tk
886 all-texinfo: all-libiberty
888 all-tgas: all-libiberty all-bfd
891 all-uudecode: all-libiberty
892 all-xiberty: all-gcc all-newlib
894 ### other supporting targets
903 @for i in $(MAKEDIRS) ; do \
904 echo Making $$i... ; \
905 parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \
906 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \
907 if [ ! -d $$i ] ; then \
908 if mkdir $$i ; then \
918 .PHONY: install-info-dirs
920 if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi
921 -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \
922 if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi
923 -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi
925 dir.info: do-install-info
926 if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \
927 $(srcdir)/texinfo/gen-info-dir $(infodir) $(srcdir)/texinfo/dir.info-template > dir.info.new ; \
928 mv -f dir.info.new dir.info ; \
933 @echo "Building a full distribution of this tree isn't done"
934 @echo "via 'make dist'. Check out the etc/ subdirectory"
943 @for i in $(SUBDIRS); \
947 wd=`basename $$pwd`; \
948 for j in `$(MAKE) ls`; \
954 # with the gnu make, this is done automatically.
956 Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag)
957 $(SHELL) ./config.status
960 # Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc
962 DEVO_SUPPORT= README Makefile.in configure configure.in \
963 config.guess config.sub config move-if-change
964 ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \
966 GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim
967 GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS)
969 .PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z
974 chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print`
976 gdb.tar.Z: setup-dirs-gdb
977 (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc")
978 (cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir)
979 $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z
981 make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex
982 rm -rf proto-toplev; mkdir proto-toplev
983 ln -s ../gdb/proto-gdb.dir proto-toplev/gdb
984 (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \
987 mkdir proto-toplev/etc
988 (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
989 ln -s ../../etc/$$i . ; \
991 # Put only one copy (four hard links) of COPYING in the tar file.
992 rm proto-toplev/bfd/COPYING
993 ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING
994 rm proto-toplev/include/COPYING
995 ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING
996 rm proto-toplev/readline/COPYING
997 ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING
999 # Take out texinfo and glob from configurable dirs
1000 rm proto-toplev/configure.in
1001 sed -e '/^host_tools=/s/texinfo //' \
1002 -e '/^host_libs=/s/glob //' \
1003 <configure.in >proto-toplev/configure.in
1005 # Take out texinfo from a few places; make simple BISON=bison line.
1006 rm proto-toplev/Makefile.in
1007 sed -e '/^all\.normal: /s/\all-texinfo //' \
1008 -e '/^ install-texinfo /d' \
1009 -e '/^BISON = /,/^$$/d' \
1010 -e '/^# BISON:/s/.*/BISON = bison -y/' \
1011 <Makefile.in >proto-toplev/Makefile.in
1013 mkdir proto-toplev/texinfo
1014 ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1015 ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
1016 chmod og=u `find proto-toplev -print`
1017 (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
1018 ln -s proto-toplev gdb-$$VER; \
1019 echo "==> Making gdb-$$VER.tar.Z"; \
1020 tar cfh - gdb-$$VER | $(COMPRESS) -v >gdb-$$VER.tar.Z; \
1021 echo "==> Making gdb-$$VER.tar.z"; \
1022 tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.z)
1024 # Make the testsuite archive separately.
1025 ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite
1026 # Blow away the Chill test that requires a Chill compiled executable,
1027 # since GNU Chill is not yet publically available.
1028 rm -rf proto-toplev/gdb/testsuite/gdb.t31
1030 # Put a copy of COPYING in the tar file.
1031 ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING
1032 chmod og=u `find proto-toplev/gdb/testsuite -print`
1033 (VER=`sed <gdb/Makefile.in -n 's/VERSION = //p'`; \
1034 echo "==> Making gdb-$$VER-testsuite.tar.Z"; \
1035 tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
1036 gdb-$$VER/config.sub gdb-$$VER/move-if-change \
1037 gdb-$$VER/gdb/testsuite | \
1038 $(COMPRESS) -v >gdb-$$VER-testsuite.tar.Z; \
1039 echo "==> Making gdb-$$VER-testsuite.tar.z"; \
1040 tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \
1041 gdb-$$VER/config.sub gdb-$$VER/move-if-change \
1042 gdb-$$VER/gdb/testsuite | \
1043 $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.z)
1045 # When you use `make setup-dirs' or `make taz' you should always redefine
1047 SUPPORT_FILES = list-of-support-files-for-tool-in-question
1048 # Directories that might want `make proto-dir' run.
1053 taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
1056 ./configure -rm sun4
1057 chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) -print`
1058 # Make links, and run "proto-dir" stuff when needed.
1059 # The `echo' for setting `p' is to convert all whitespace to spaces.
1060 # Then the `case' further below should tell whether $$d is in
1062 rm -rf proto-toplev ; mkdir proto-toplev
1063 dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
1064 p=" `echo $(PROTODIRS)` " ; \
1065 for d in $$dirs ; do \
1066 if [ -d $$d ]; then \
1067 case " $(PROTODIRS) " in \
1068 "* $$d *") (cd $$d ; $(MAKE) -f Makefile.in proto-dir) ; \
1069 ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ;; \
1070 *) ln -s ../$$d proto-toplev/$$d ;; \
1072 else ln -s ../$$d proto-toplev/$$d ; fi ; \
1075 mkdir proto-toplev/etc
1076 (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \
1077 ln -s ../../etc/$$i . ; \
1080 # Take out texinfo and glob from configurable dirs
1081 rm proto-toplev/configure.in
1082 sed -e '/^host_tools=/s/texinfo //' \
1083 -e '/^host_libs=/s/glob //' \
1084 <configure.in >proto-toplev/configure.in
1086 # Take out texinfo from a few places; make simple BISON=bison line.
1087 rm proto-toplev/Makefile.in
1088 sed -e '/^all\.normal: /s/\all-texinfo //' \
1089 -e '/^ install-texinfo /d' \
1090 -e '/^BISON = /,/^$$/d' \
1091 -e '/^# BISON:/s/.*/BISON = bison -y/' \
1092 <Makefile.in >proto-toplev/Makefile.in
1094 mkdir proto-toplev/texinfo
1095 ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
1096 ln -s ../../texinfo/tex3patch proto-toplev/texinfo/
1097 chmod og=u `find proto-toplev -print`
1098 (VER=`sed <$(TOOL)/Makefile.in -n 's/VERSION *= *//p'`; \
1099 echo "==> Making $(TOOL)-$$VER.tar.z"; \
1100 ln -s proto-toplev $(TOOL)-$$VER; \
1101 tar cfh - $(TOOL)-$$VER \
1102 | $(GZIP) -v >$(TOOL)-$$VER.tar.z)
1104 GAS_SUPPORT_DIRS= bfd include libiberty opcodes
1107 gas.tar.z: $(DEVO_SUPPORT) $(GAS_SUPPORT_DIRS) gas texinfo/texinfo.tex
1108 $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas
1110 .PHONY: gas+binutils.tar.z
1111 GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
1112 gas+binutils.tar.z: $(DEVO_SUPPORT) $(GASB_SUPPORT_DIRS) gas texinfo/texinfo.tex
1113 $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas
1118 # start-sanitize-chill
1119 ## This is ugly, but I don't want GNU make to put these variables in
1120 ## the environment. Older makes will see this as a set of targets
1121 ## with no dependencies and no actions.
1122 unexport CHILLFLAGS CHILL_LIB CHILL_FOR_TARGET :
1123 # end-sanitize-chill
1125 # end of Makefile.in