Makefile.in

   1 # Nettle Makefile
   2
   3 @SET_MAKE@
   4
   5 srcdir = @srcdir@
   6 VPATH = @srcdir@
   7
   8 LIBOBJS = @LIBOBJS@
   9
  10 INSTALL = @INSTALL@
  11 INSTALL_DATA = @INSTALL_DATA@
  12 INSTALL_PROGRAM = @INSTALL_PROGRAM@
  13 INSTALL_SCRIPT = @INSTALL_SCRIPT@
  14 INSTALL_STRIP_PROGRAM = $(INSTALL_PROGRAM) -s
  15 MKDIR_P = @MKDIR_P@
  16
  17 SUBDIRS = tools testsuite examples
  18
  19 include config.make
  20
  21 PRE_CPPFLAGS = -I.
  22 # FIXME: Add configuration of LIBEXT?
  23 LIBTARGETS = libnettle.a @IF_HOGWEED@ libhogweed.a
  24 SHLIBTARGETS = $(LIBNETTLE_FORLINK) @IF_HOGWEED@ $(LIBHOGWEED_FORLINK)
  25
  26 TARGETS = aesdata$(EXEEXT) desdata$(EXEEXT) shadata$(EXEEXT) \
  27           $(LIBTARGETS) @IF_SHARED@ $(SHLIBTARGETS)
  28
  29 DOCTARGETS = nettle.info nettle.html nettle.pdf
  30
  31 all check install uninstall:
  32         $(MAKE) $@-here
  33         set -e; for d in $(SUBDIRS); do \
  34           echo "Making $@ in $$d" ; (cd $$d && $(MAKE) $@); done
  35
  36 clean distclean mostlyclean maintainer-clean tags:
  37         set -e; for d in $(SUBDIRS); do \
  38           echo "Making $@ in $$d" ; (cd $$d && $(MAKE) $@); done
  39         $(MAKE) $@-here
  40
  41 check-here:
  42         true
  43
  44 # FIXME: Remove. These targets aren't supported, but they are expected by the
  45 # automake generated Makefiles in the lsh build.
  46 dvi installcheck uninstallcheck:
  47         true
  48
  49 all-here: $(TARGETS) $(DOCTARGETS)
  50
  51 nettle_SOURCES = aes-decrypt-internal.c aes-decrypt.c \
  52                  aes-encrypt-internal.c aes-encrypt.c aes-encrypt-table.c \
  53                  aes-set-encrypt-key.c aes-set-decrypt-key.c aes-meta.c \
  54                  arcfour.c arcfour-crypt.c arcfour-meta.c \
  55                  arctwo.c arctwo-meta.c \
  56                  base16-encode.c base16-decode.c base16-meta.c \
  57                  base64-encode.c base64-decode.c base64-meta.c \
  58                  camellia-crypt.c camellia-crypt-internal.c \
  59                  camellia-set-encrypt-key.c camellia-set-decrypt-key.c \
  60                  camellia-table.c camellia-meta.c \
  61                  cast128.c cast128-meta.c \
  62                  blowfish.c \
  63                  cbc.c ctr.c \
  64                  des.c \
  65                  des3.c des-compat.c \
  66                  hmac.c hmac-md5.c hmac-sha1.c \
  67                  hmac-sha224.c hmac-sha256.c hmac-sha384.c hmac-sha512.c \
  68                  knuth-lfib.c \
  69                  md2.c md2-meta.c md4.c md4-meta.c \
  70                  md5.c md5-compress.c md5-compat.c md5-meta.c \
  71                  sha1.c sha1-compress.c sha1-meta.c \
  72                  sha256.c sha256-compress.c sha224-meta.c sha256-meta.c \
  73                  sha512.c sha512-compress.c sha384-meta.c sha512-meta.c \
  74                  serpent.c serpent-meta.c \
  75                  twofish.c twofish-meta.c \
  76                  yarrow256.c yarrow_key_event.c \
  77                  buffer.c buffer-init.c realloc.c \
  78                  nettle-internal.c write-be32.c
  79
  80 hogweed_SOURCES = sexp.c sexp-format.c \
  81                   sexp-transport.c sexp-transport-format.c \
  82                   bignum.c bignum-next-prime.c \
  83                   bignum-random.c bignum-random-prime.c \
  84                   sexp2bignum.c \
  85                   pkcs1.c pkcs1-rsa-md5.c pkcs1-rsa-sha1.c \
  86                   pkcs1-rsa-sha256.c pkcs1-rsa-sha512.c \
  87                   rsa.c rsa-sign.c rsa-verify.c \
  88                   rsa-md5-sign.c rsa-md5-verify.c \
  89                   rsa-sha1-sign.c rsa-sha1-verify.c \
  90                   rsa-sha256-sign.c rsa-sha256-verify.c \
  91                   rsa-sha512-sign.c rsa-sha512-verify.c \
  92                   rsa-encrypt.c rsa-decrypt.c \
  93                   rsa-keygen.c rsa-compat.c \
  94                   rsa2sexp.c sexp2rsa.c \
  95                   dsa.c dsa-sign.c dsa-verify.c dsa-keygen.c \
  96                   dsa-sha1-sign.c dsa-sha1-verify.c \
  97                   dsa-sha256-sign.c dsa-sha256-verify.c  \
  98                   dsa2sexp.c sexp2dsa.c \
  99                   pgp-encode.c rsa2openpgp.c \
 100                   der-iterator.c der2rsa.c der2dsa.c
 101
 102 HEADERS = aes.h arcfour.h arctwo.h asn1.h bignum.h blowfish.h \
 103           base16.h base64.h buffer.h camellia.h cast128.h \
 104           cbc.h ctr.h \
 105           des.h des-compat.h dsa.h \
 106           hmac.h \
 107           knuth-lfib.h \
 108           macros.h \
 109           md2.h md4.h \
 110           md5.h md5-compat.h \
 111           memxor.h \
 112           nettle-meta.h nettle-types.h \
 113           pgp.h pkcs1.h realloc.h rsa.h rsa-compat.h \
 114           sexp.h \
 115           serpent.h sha.h twofish.h \
 116           yarrow.h
 117
 118 INSTALL_HEADERS = $(HEADERS) nettle-stdint.h
 119
 120 SOURCES = $(nettle_SOURCES) $(hogweed_SOURCES) aesdata.c desdata.c shadata.c
 121
 122 DISTFILES = $(SOURCES) $(HEADERS) .bootstrap aclocal.m4 configure.ac \
 123         configure stamp-h.in \
 124         config.guess config.sub install-sh texinfo.tex \
 125         config.h.in config.m4.in config.make.in Makefile.in \
 126         README AUTHORS COPYING COPYING.LIB INSTALL NEWS TODO ChangeLog \
 127         memxor.c $(des_headers) descore.README \
 128         aes-internal.h camellia-internal.h cast128_sboxes.h desinfo.h desCode.h \
 129         serpent_sboxes.h nettle-internal.h nettle-write.h prime-list.h \
 130         asm.m4 \
 131         nettle.texinfo nettle.info nettle.html nettle.pdf sha-example.c
 132
 133 # Rules building static libraries
 134 nettle_OBJS = $(nettle_SOURCES:.c=.$(OBJEXT)) $(LIBOBJS)
 135 nettle_PURE_OBJS = $(nettle_OBJS:.$(OBJEXT)=.p$(OBJEXT))
 136
 137 hogweed_OBJS = $(hogweed_SOURCES:.c=.$(OBJEXT))
 138 hogweed_PURE_OBJS = $(hogweed_OBJS:.$(OBJEXT)=.p$(OBJEXT))
 139
 140 # FIXME: Do we really need to delete the archive first?
 141 libnettle.a: $(nettle_OBJS)
 142         -rm -f $@
 143         $(AR) $(ARFLAGS) $@ $(nettle_OBJS)
 144         $(RANLIB) $@
 145
 146 # FIXME: Do we really need to delete the archive first?
 147 libhogweed.a: $(hogweed_OBJS)
 148         -rm -f $@
 149         $(AR) $(ARFLAGS) $@ $(hogweed_OBJS)
 150         $(RANLIB) $@
 151
 152 .c.$(OBJEXT):
 153         $(COMPILE) $(CCPIC_MAYBE) -c $< \
 154         && $(DEP_PROCESS)
 155
 156 # Rules building shared libraries
 157 $(LIBNETTLE_FORLINK): $(nettle_PURE_OBJS)
 158         $(LIBNETTLE_LINK) $(nettle_PURE_OBJS) -o $@ $(LIBNETTLE_LIBS)
 159         -mkdir .lib 2>/dev/null
 160         [ -z "$(LIBNETTLE_SONAME)" ] || (cd .lib \
 161           && ln -sf ../$(LIBNETTLE_FORLINK) $(LIBNETTLE_SONAME))
 162
 163 $(LIBHOGWEED_FORLINK): $(hogweed_PURE_OBJS) $(LIBNETTLE_FORLINK)
 164         $(LIBHOGWEED_LINK) $(hogweed_PURE_OBJS) -o $@ $(LIBHOGWEED_LIBS)
 165         -mkdir .lib 2>/dev/null
 166         [ -z "$(LIBHOGWEED_SONAME)" ] || (cd .lib \
 167           && ln -sf ../$(LIBHOGWEED_FORLINK) $(LIBHOGWEED_SONAME))
 168
 169 .c.p$(OBJEXT):
 170         $(COMPILE) $(SHLIBCFLAGS) -c $< -o $@ \
 171         && $(DEP_PROCESS)
 172
 173 # For Solaris and BSD make, we have to use an explicit rule for each executable
 174 aesdata$(EXEEXT): aesdata.$(OBJEXT)
 175         $(LINK) aesdata.$(OBJEXT) $(LIBS) -o aesdata$(EXEEXT)
 176
 177 desdata$(EXEEXT): desdata.$(OBJEXT)
 178         $(LINK) desdata.$(OBJEXT) $(LIBS) -o desdata$(EXEEXT)
 179
 180 shadata$(EXEEXT): shadata.$(OBJEXT)
 181         $(LINK) shadata.$(OBJEXT) $(LIBS) -lm -o shadata$(EXEEXT)
 182
 183 # .$(OBJEXT)$(EXEEXT):
 184 #       $(LINK) $< $(LIBS) -o $@
 185
 186 # desCore rules
 187 # It seems using $(srcdir)/ doesn't work with GNU make 3.79.1
 188 # des_headers = $(srcdir)/rotors.h $(srcdir)/keymap.h
 189 des_headers = rotors.h keymap.h
 190
 191 # Generate DES headers.
 192 $(des_headers): desdata.c
 193         $(MAKE) desdata$(EXEEXT)
 194         f="$(srcdir)/`basename $@`"; \
 195           ./desdata$(EXEEXT) $(@F) > $${f}T; \
 196           test -s $${f}T && mv -f $${f}T $$f
 197
 198 des.$(OBJEXT): des.c des.h $(des_headers)
 199
 200 .asm.$(OBJEXT):
 201         $(M4) $(srcdir)/asm.m4 machine.m4 config.m4 \
 202                 $< >$*.s
 203         $(COMPILE) $(CCPIC_MAYBE) -c $*.s
 204         echo "$@ : $< $(srcdir)/asm.m4 machine.m4 config.m4" >$@.d
 205
 206 .asm.p$(OBJEXT):
 207         $(M4) $(srcdir)/asm.m4 machine.m4 config.m4 \
 208                 $< >$*.s
 209         $(COMPILE) $(SHLIBCFLAGS) -c $*.s -o $@
 210         echo "$@ : $< $(srcdir)/asm.m4 machine.m4 config.m4" >$@.d
 211
 212 # Texinfo rules
 213 .texinfo.info:
 214         cd $(srcdir) && $(MAKEINFO) --output $@ `basename "$<"`
 215
 216 .texinfo.html:
 217         cd $(srcdir) && $(MAKEINFO) --html --no-split \
 218           --output $@T `basename "$<"` \
 219           && test -s $@T && mv -f $@T $@
 220
 221 .texinfo.dvi:
 222         cd $(srcdir) && texi2dvi `basename "$<"`
 223
 224 .dvi.ps:
 225         cd $(srcdir) && dvips -Ppdf -G0 -o `basename "$<" .dvi`.ps `basename "$<"`
 226
 227 # Avoid rebuilding .dvi and .ps files when the .texinfo source is unchanged.
 228 PS2PDFFLAGS=-dCompatibilityLevel=1.3 -dMAxSubsetPct=100 -dSubsetFonts=true -dEmbedAllFonts=true
 229 .texinfo.pdf:
 230         $(MAKE) `basename "$<" .texinfo`.ps
 231         cd $(srcdir) && ps2pdf $(PS2PDFFLAGS) `basename "$<" .texinfo`.ps
 232
 233 # Configure-related rules, mostly copied from the autoconf manual. No
 234 # $(srcdir) prefixes on the targets, though.
 235
 236 configure: configure.ac aclocal.m4
 237         cd $(srcdir) && $(AUTOCONF)
 238
 239 # autoheader might not change config.h.in, so touch a stamp file.
 240 config.h.in: stamp-h.in
 241 stamp-h.in: configure.ac aclocal.m4
 242         cd $(srcdir) && $(AUTOHEADER)
 243         echo timestamp > $(srcdir)/stamp-h.in
 244
 245 config.status: configure
 246         ./config.status --recheck
 247
 248 config.h: stamp-h
 249 stamp-h: config.h.in config.status
 250         ./config.status config.h
 251         echo timestamp > stamp-h
 252
 253 Makefile: Makefile.in config.status
 254         ./config.status $@
 255
 256 config.make: config.make.in config.status
 257         ./config.status $@
 258
 259 config.m4: config.m4.in config.status
 260         ./config.status $@
 261
 262 # Installation
 263 install-here: install-info install-headers install-static \
 264         @IF_SHARED@ install-shared-nettle @IF_HOGWEED@ install-shared-hogweed
 265
 266 install-static: $(LIBTARGETS)
 267         $(MKDIR_P) $(DESTDIR)$(libdir)
 268         for f in $(LIBTARGETS); do \
 269           $(INSTALL_DATA) $$f $(DESTDIR)$(libdir) ; \
 270         done
 271
 272 install-shared-nettle: $(LIBNETTLE_FORLINK)
 273         $(MKDIR_P) $(DESTDIR)$(libdir)
 274         $(INSTALL_PROGRAM) $(LIBNETTLE_FORLINK) $(DESTDIR)$(libdir)/$(LIBNETTLE_FILE)
 275         [ -z "$(LIBNETTLE_SONAME)" ] \
 276                 || (cd $(DESTDIR)$(libdir) \
 277                 && ln -sf $(LIBNETTLE_FILE) $(LIBNETTLE_SONAME) \
 278                 && ln -sf $(LIBNETTLE_FILE) $(LIBNETTLE_FORLINK))
 279
 280 install-shared-hogweed: $(LIBHOGWEED_FORLINK)
 281         $(MKDIR_P) $(DESTDIR)$(libdir)
 282         $(INSTALL_PROGRAM) $(LIBHOGWEED_FORLINK) $(DESTDIR)$(libdir)/$(LIBHOGWEED_FILE)
 283         [ -z "$(LIBHOGWEED_SONAME)" ] \
 284                 || (cd $(DESTDIR)$(libdir) \
 285                 && ln -sf $(LIBHOGWEED_FILE) $(LIBHOGWEED_SONAME) \
 286                 && ln -sf $(LIBHOGWEED_FILE) $(LIBHOGWEED_FORLINK))
 287
 288 # I'd like to use makes VPATH search to locate the files to be
 289 # installed. But it seems most make programs don't set $<, $^, $? and
 290 # friends for ordinary explicit rules.
 291
 292 install-info: nettle.info
 293         $(MKDIR_P) $(DESTDIR)$(infodir)
 294         f=nettle.info ; \
 295         [ -f $$f ] || f="$(srcdir)/$$f" ; \
 296         $(INSTALL_DATA) "$$f" $(DESTDIR)$(infodir) ; \
 297         if (install-info --version && \
 298             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 299           install-info --info-dir="$(DESTDIR)$(infodir)" "$$f" ; \
 300         else : ; fi
 301
 302 # NOTE: I'd like to use $^, but that's a GNU extension. $? should be
 303 # more portable, and equivalent for phony targets.
 304 install-headers: $(INSTALL_HEADERS)
 305         $(MKDIR_P) $(DESTDIR)$(includedir)/nettle
 306         for f in $(INSTALL_HEADERS) ; do \
 307           if [ -f "$$f" ] ; then \
 308             $(INSTALL_DATA) "$$f" $(DESTDIR)$(includedir)/nettle ; \
 309           else \
 310             $(INSTALL_DATA) "$(srcdir)/$$f" $(DESTDIR)$(includedir)/nettle ; \
 311           fi ; done
 312
 313 # Uninstall
 314 uninstall-here: uninstall-info uninstall-headers uninstall-static \
 315                 @IF_SHARED@ uninstall-shared
 316
 317 uninstall-static:
 318         for f in $(LIBTARGETS) ; do \
 319           rm -f $(DESTDIR)$(libdir)/$$f ; \
 320         done
 321
 322 uninstall-headers:
 323         for f in $(INSTALL_HEADERS) ; do \
 324           rm -f $(DESTDIR)$(includedir)/nettle/$$f ; \
 325         done
 326
 327 uninstall-info:
 328         if (install-info --version && \
 329             install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
 330           install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)"/nettle.info ; \
 331         else : ; fi
 332         -rm -f $(DESTDIR)$(infodir)/nettle.info
 333
 334 # FIXME: Leaves the links around
 335 uninstall-shared: uninstall-shared-nettle @IF_HOGWEED@ uninstall-shared-hogweed
 336
 337 uninstall-shared-nettle:
 338         rm -f $(DESTDIR)$(libdir)/$(LIBNETTLE_FILE)
 339         [ -z "$(LIBNETTLE_SONAME)" ] \
 340                 || rm -f $(LIBNETTLE_SONAME) $(LIBNETTLE_FORLINK)
 341
 342 uninstall-shared-hogweed:
 343         rm -f $(DESTDIR)$(libdir)/$(LIBHOGWEED_FILE)
 344         [ -z "$(LIBHOGWEED_SONAME)" ] \
 345                 || rm -f $(LIBHOGWEED_SONAME) $(LIBHOGWEED_FORLINK)
 346
 347 # Distribution
 348 distdir = $(PACKAGE_NAME)-$(PACKAGE_VERSION)
 349 top_distdir = $(distdir)
 350
 351 # NOTE: We should handle both absolute and relative $destdir.
 352
 353 distdir: $(DISTFILES)
 354         rm -rf "$(distdir)"
 355         mkdir "$(distdir)"
 356         set -e; for f in $(DISTFILES) ; do \
 357           if [ -f "$$f" ] ; then cp "$$f" "$(distdir)" ; \
 358           else cp "$(srcdir)/$$f" "$(distdir)" ; \
 359           fi ; \
 360         done
 361         set -e; for d in sparc32 sparc64 x86 x86_64; do \
 362           mkdir "$(distdir)/$$d" ; \
 363           cp $(srcdir)/$$d/*.asm $(srcdir)/$$d/*.m4 "$(distdir)/$$d" ; \
 364         done
 365         set -e; for d in $(SUBDIRS); do \
 366           sd="$(distdir)/$$d" ; \
 367           mkdir "$$sd" && $(MAKE) -C $$d distdir="`cd $$sd && pwd`" $@ ; \
 368         done
 369
 370 dist: distdir
 371         tar cf - $(distdir) | gzip -c >$(distdir).tar.gz
 372         rm -rf $(distdir)
 373
 374 rm_distcheck = test ! -d distcheck-tmp \
 375             || { find distcheck-tmp -type d ! -perm -200 -exec chmod u+w {} ';' \
 376                  && rm -fr distcheck-tmp; };
 377
 378 distcheck: dist
 379         $(rm_distcheck)
 380         mkdir distcheck-tmp
 381         gzip -d < $(distdir).tar.gz \
 382           | { cd distcheck-tmp && tar xf - && chmod -R a-w $(distdir) ; }
 383         mkdir distcheck-tmp/build
 384         mkdir distcheck-tmp/install
 385         cd distcheck-tmp/build && ../$(distdir)/configure --prefix="`cd ../install && pwd`"
 386         cd distcheck-tmp/build && $(MAKE)
 387         cd distcheck-tmp/build && $(MAKE) check
 388         cd distcheck-tmp/build && $(MAKE) install
 389         cd distcheck-tmp/build && $(MAKE) uninstall
 390         cd distcheck-tmp && find install -type f -print > leftover-install-files
 391         @test `cat distcheck-tmp/leftover-install-files | wc -l` -le 1  \
 392           || { echo "ERROR: files left after uninstall:" ; \
 393                cat distcheck-tmp/leftover-install-files ; \
 394                exit 1; }
 395         chmod -R a-w distcheck-tmp/install
 396         mkdir distcheck-tmp/destdir
 397         destdir="`cd distcheck-tmp/destdir && pwd`" \
 398           && cd distcheck-tmp/build \
 399           && $(MAKE) install DESTDIR="$$destdir" \
 400           && $(MAKE) uninstall DESTDIR="$$destdir"
 401         cd distcheck-tmp && find destdir -type f -print > leftover-destdir-files
 402         @test `cat distcheck-tmp/leftover-destdir-files | wc -l` -le 1  \
 403           || { echo "ERROR: destdir files left after uninstall:" ; \
 404                cat distcheck-tmp/leftover-destdir-files ; \
 405                exit 1; }
 406         cd distcheck-tmp/build && $(MAKE) dist
 407         cd distcheck-tmp/build && rm *.gz
 408         cd distcheck-tmp/build && $(MAKE) distclean
 409         cd distcheck-tmp && find build -type f -print > leftover-build-files
 410         @test `cat distcheck-tmp/leftover-build-files | wc -l` -eq 0  \
 411           || { echo "ERROR: files left in build directory after distclean:" ; \
 412                cat distcheck-tmp/leftover-build-files ; \
 413                exit 1; }
 414         $(rm_distcheck)
 415
 416 clean-here:
 417         -rm -f $(TARGETS) *.$(OBJEXT) *.p$(OBJEXT) *.s
 418         -rm -rf .lib
 419
 420 distclean-here: clean-here
 421         -rm -f config.h stamp-h config.log config.status machine.m4 \
 422         config.make config.m4 Makefile nettle-stdint.h *.asm *.d
 423
 424 maintainer-clean-here:
 425         -rm -f $(DOCTARGETS) *.dvi *.ps
 426
 427 tags-here:
 428         etags -o $(srcdir)/TAGS $(srcdir)/*.c $(srcdir)/*.h
 429
 430 DEP_FILES = $(SOURCES:.c=.$(OBJEXT).d) $(SOURCES:.c=.p$(OBJEXT).d)
 431 @DEP_INCLUDE@ $(DEP_FILES)