1 # Makefile.in generated by automake 1.14.1 from Makefile.am.
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # fontconfig/Makefile.am
20 # Copyright © 2003 Keith Packard
22 # Permission to use, copy, modify, distribute, and sell this software and its
23 # documentation for any purpose is hereby granted without fee, provided that
24 # the above copyright notice appear in all copies and that both that
25 # copyright notice and this permission notice appear in supporting
26 # documentation, and that the name of the author(s) not be used in
27 # advertising or publicity pertaining to distribution of the software without
28 # specific, written prior permission. The authors make no
29 # representations about the suitability of this software for any purpose. It
30 # is provided "as is" without express or implied warranty.
32 # THE AUTHOR(S) DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
33 # INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
34 # EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY SPECIAL, INDIRECT OR
35 # CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
36 # DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
37 # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
38 # PERFORMANCE OF THIS SOFTWARE.
41 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
42 am__make_running_with_option = \
43 case $${target_option-} in \
45 *) echo "am__make_running_with_option: internal error: invalid" \
46 "target option '$${target_option-}' specified" >&2; \
50 sane_makeflags=$$MAKEFLAGS; \
51 if $(am__is_gnu_make); then \
52 sane_makeflags=$$MFLAGS; \
57 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
58 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
64 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
66 for flg in $$sane_makeflags; do \
67 test $$skip_next = yes && { skip_next=no; continue; }; \
70 -*I) strip_trailopt 'I'; skip_next=yes;; \
71 -*I?*) strip_trailopt 'I';; \
72 -*O) strip_trailopt 'O'; skip_next=yes;; \
73 -*O?*) strip_trailopt 'O';; \
74 -*l) strip_trailopt 'l'; skip_next=yes;; \
75 -*l?*) strip_trailopt 'l';; \
76 -[dEDm]) skip_next=yes;; \
77 -[JT]) skip_next=yes;; \
80 *$$target_option*) has_opt=yes; break;; \
84 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
85 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
86 pkgdatadir = $(datadir)/@PACKAGE@
87 pkgincludedir = $(includedir)/@PACKAGE@
88 pkglibdir = $(libdir)/@PACKAGE@
89 pkglibexecdir = $(libexecdir)/@PACKAGE@
90 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
91 install_sh_DATA = $(install_sh) -c -m 644
92 install_sh_PROGRAM = $(install_sh) -c
93 install_sh_SCRIPT = $(install_sh) -c
94 INSTALL_HEADER = $(INSTALL_DATA)
95 transform = $(program_transform_name)
102 build_triplet = @build@
103 host_triplet = @host@
104 @ENABLE_DOCS_TRUE@am__append_1 = doc
106 DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
107 $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
108 $(top_srcdir)/configure $(am__configure_deps) \
109 $(srcdir)/config.h.in $(srcdir)/fontconfig.spec.in \
110 $(srcdir)/fontconfig.pc.in $(srcdir)/fontconfig-zip.in COPYING \
111 compile config.guess config.sub depcomp install-sh missing \
113 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
114 am__aclocal_m4_deps = $(top_srcdir)/m4/ac_check_symbol.m4 \
115 $(top_srcdir)/m4/ax_cc_for_build.m4 \
116 $(top_srcdir)/m4/ax_create_stdint_h.m4 \
117 $(top_srcdir)/m4/ax_pthread.m4 $(top_srcdir)/m4/libtool.m4 \
118 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
119 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
120 $(top_srcdir)/m4/pkg.m4 $(top_srcdir)/configure.ac
121 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
123 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
124 configure.lineno config.status.lineno
125 mkinstalldirs = $(install_sh) -d
126 CONFIG_HEADER = config.h
127 CONFIG_CLEAN_FILES = fontconfig.spec fontconfig.pc fontconfig-zip
128 CONFIG_CLEAN_VPATH_FILES =
129 AM_V_P = $(am__v_P_@AM_V@)
130 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
133 AM_V_GEN = $(am__v_GEN_@AM_V@)
134 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
135 am__v_GEN_0 = @echo " GEN " $@;
137 AM_V_at = $(am__v_at_@AM_V@)
138 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
143 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
144 ctags-recursive dvi-recursive html-recursive info-recursive \
145 install-data-recursive install-dvi-recursive \
146 install-exec-recursive install-html-recursive \
147 install-info-recursive install-pdf-recursive \
148 install-ps-recursive install-recursive installcheck-recursive \
149 installdirs-recursive pdf-recursive ps-recursive \
150 tags-recursive uninstall-recursive
151 am__can_run_installinfo = \
152 case $$AM_UPDATE_INFO_DIR in \
154 *) (install-info --version) >/dev/null 2>&1;; \
156 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
157 am__vpath_adj = case $$p in \
158 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
161 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
163 am__nobase_strip_setup = \
164 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
166 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
167 am__nobase_list = $(am__nobase_strip_setup); \
168 for p in $$list; do echo "$$p $$p"; done | \
169 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
170 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
171 if (++n[$$2] == $(am__install_max)) \
172 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
173 END { for (dir in files) print dir, files[dir] }'
175 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
176 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
177 am__uninstall_files_from_dir = { \
179 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
180 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
181 $(am__cd) "$$dir" && rm -f $$files; }; \
183 am__installdirs = "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xmldir)"
184 DATA = $(pkgconfig_DATA) $(xml_DATA)
185 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
186 distclean-recursive maintainer-clean-recursive
187 am__recursive_targets = \
188 $(RECURSIVE_TARGETS) \
189 $(RECURSIVE_CLEAN_TARGETS) \
190 $(am__extra_recursive_targets)
191 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
192 cscope distdir dist dist-all distcheck
193 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
195 # Read a list of newline-separated strings from the standard input,
196 # and print each of them once, without duplicates. Input order is
198 am__uniquify_input = $(AWK) '\
199 BEGIN { nonempty = 0; } \
200 { items[$$0] = 1; nonempty = 1; } \
201 END { if (nonempty) { for (i in items) print i; }; } \
203 # Make sure the list of sources is unique. This is necessary because,
204 # e.g., the same source file might be shared among _SOURCES variables
205 # for different programs/libraries.
206 am__define_uniq_tagged_files = \
207 list='$(am__tagged_files)'; \
208 unique=`for i in $$list; do \
209 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
210 done | $(am__uniquify_input)`
214 DIST_SUBDIRS = fontconfig fc-blanks fc-case fc-lang fc-glyphname src \
215 fc-cache fc-cat fc-list fc-match fc-pattern fc-query fc-scan \
216 fc-validate conf.d test doc
217 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
218 distdir = $(PACKAGE)-$(VERSION)
219 top_distdir = $(distdir)
220 am__remove_distdir = \
221 if test -d "$(distdir)"; then \
222 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
223 && rm -rf "$(distdir)" \
224 || { sleep 5 && rm -rf "$(distdir)"; }; \
226 am__post_remove_distdir = $(am__remove_distdir)
229 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
230 sed_rest='s,^[^/]*/*,,'; \
231 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
232 sed_butlast='s,/*[^/]*$$,,'; \
233 while test -n "$$dir1"; do \
234 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
235 if test "$$first" != "."; then \
236 if test "$$first" = ".."; then \
237 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
238 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
240 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
241 if test "$$first2" = "$$first"; then \
242 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
246 dir0="$$dir0"/"$$first"; \
249 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
252 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
254 DIST_TARGETS = dist-bzip2 dist-gzip
255 distuninstallcheck_listfiles = find . -type f -print
256 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
257 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
258 distcleancheck_listfiles = find . -type f -print
261 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
264 AUTOCONF = @AUTOCONF@
265 AUTOHEADER = @AUTOHEADER@
266 AUTOMAKE = @AUTOMAKE@
268 BASECONFIGDIR = @BASECONFIGDIR@
270 CCDEPMODE = @CCDEPMODE@
271 CC_FOR_BUILD = @CC_FOR_BUILD@
273 CONFIGDIR = @CONFIGDIR@
275 CPPFLAGS = @CPPFLAGS@
276 CYGPATH_W = @CYGPATH_W@
281 DSYMUTIL = @DSYMUTIL@
288 EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
289 EXPAT_CFLAGS = @EXPAT_CFLAGS@
290 EXPAT_LIBS = @EXPAT_LIBS@
291 FC_ADD_FONTS = @FC_ADD_FONTS@
292 FC_CACHEDIR = @FC_CACHEDIR@
293 FC_DEFAULT_FONTS = @FC_DEFAULT_FONTS@
294 FC_FONTDATE = @FC_FONTDATE@
295 FC_FONTPATH = @FC_FONTPATH@
297 FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
298 FREETYPE_LIBS = @FREETYPE_LIBS@
302 HASDOCBOOK = @HASDOCBOOK@
303 HAVE_XMLPARSE_H = @HAVE_XMLPARSE_H@
304 ICONV_CFLAGS = @ICONV_CFLAGS@
305 ICONV_LIBS = @ICONV_LIBS@
307 INSTALL_DATA = @INSTALL_DATA@
308 INSTALL_PROGRAM = @INSTALL_PROGRAM@
309 INSTALL_SCRIPT = @INSTALL_SCRIPT@
310 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
316 LIBT_CURRENT = @LIBT_CURRENT@
317 LIBT_CURRENT_MINUS_AGE = @LIBT_CURRENT_MINUS_AGE@
318 LIBT_REVISION = @LIBT_REVISION@
319 LIBT_VERSION_INFO = @LIBT_VERSION_INFO@
320 LIBXML2_CFLAGS = @LIBXML2_CFLAGS@
321 LIBXML2_LIBS = @LIBXML2_LIBS@
324 LTLIBOBJS = @LTLIBOBJS@
325 MAKEINFO = @MAKEINFO@
326 MANIFEST_TOOL = @MANIFEST_TOOL@
335 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
336 PACKAGE_NAME = @PACKAGE_NAME@
337 PACKAGE_STRING = @PACKAGE_STRING@
338 PACKAGE_TARNAME = @PACKAGE_TARNAME@
339 PACKAGE_URL = @PACKAGE_URL@
340 PACKAGE_VERSION = @PACKAGE_VERSION@
341 PATH_SEPARATOR = @PATH_SEPARATOR@
342 PKGCONFIG_REQUIRES = @PKGCONFIG_REQUIRES@
343 PKGCONFIG_REQUIRES_PRIVATELY = @PKGCONFIG_REQUIRES_PRIVATELY@
344 PKG_CONFIG = @PKG_CONFIG@
345 PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
346 PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
347 PTHREAD_CC = @PTHREAD_CC@
348 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
349 PTHREAD_LIBS = @PTHREAD_LIBS@
351 PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
352 PYTHON_PLATFORM = @PYTHON_PLATFORM@
353 PYTHON_PREFIX = @PYTHON_PREFIX@
354 PYTHON_VERSION = @PYTHON_VERSION@
358 SET_MAKE = @SET_MAKE@
361 TEMPLATEDIR = @TEMPLATEDIR@
363 WARN_CFLAGS = @WARN_CFLAGS@
365 abs_builddir = @abs_builddir@
366 abs_srcdir = @abs_srcdir@
367 abs_top_builddir = @abs_top_builddir@
368 abs_top_srcdir = @abs_top_srcdir@
369 ac_ct_AR = @ac_ct_AR@
370 ac_ct_CC = @ac_ct_CC@
371 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
372 am__include = @am__include@
373 am__leading_dot = @am__leading_dot@
374 am__quote = @am__quote@
376 am__untar = @am__untar@
377 ax_pthread_config = @ax_pthread_config@
380 build_alias = @build_alias@
381 build_cpu = @build_cpu@
382 build_os = @build_os@
383 build_vendor = @build_vendor@
384 builddir = @builddir@
386 datarootdir = @datarootdir@
389 exec_prefix = @exec_prefix@
390 fc_cachedir = @fc_cachedir@
392 host_alias = @host_alias@
393 host_cpu = @host_cpu@
395 host_vendor = @host_vendor@
397 includedir = @includedir@
399 install_sh = @install_sh@
401 libexecdir = @libexecdir@
402 localedir = @localedir@
403 localstatedir = @localstatedir@
406 ms_librarian = @ms_librarian@
407 oldincludedir = @oldincludedir@
409 pkgconfigdir = @pkgconfigdir@
410 pkgpyexecdir = @pkgpyexecdir@
411 pkgpythondir = @pkgpythondir@
413 program_transform_name = @program_transform_name@
415 pyexecdir = @pyexecdir@
416 pythondir = @pythondir@
418 sharedstatedir = @sharedstatedir@
420 sysconfdir = @sysconfdir@
421 target_alias = @target_alias@
422 top_build_prefix = @top_build_prefix@
423 top_builddir = @top_builddir@
424 top_srcdir = @top_srcdir@
425 SUBDIRS = fontconfig fc-blanks fc-case fc-lang fc-glyphname src \
426 fc-cache fc-cat fc-list fc-match fc-pattern fc-query fc-scan \
427 fc-validate conf.d test $(am__append_1)
428 ACLOCAL_AMFLAGS = -I m4
429 EXTRA_DIST = fontconfig.pc.in fonts.conf.in fonts.dtd \
430 fontconfig.spec.in fontconfig.spec fontconfig-zip.in \
431 config-fixups.h ChangeLog
432 CLEANFILES = fonts.conf
433 DISTCLEANFILES = config.cache doltcompile
435 # Creating ChangeLog from git log:
436 MAINTAINERCLEANFILES = $(srcdir)/aclocal.m4 $(srcdir)/autoscan.log \
437 $(srcdir)/compile $(srcdir)/config.guess $(srcdir)/config.h.in \
438 $(srcdir)/config.sub $(srcdir)/configure.scan \
439 $(srcdir)/depcomp $(srcdir)/install-sh $(srcdir)/ltmain.sh \
440 $(srcdir)/missing $(srcdir)/mkinstalldirs \
441 $(srcdir)/test-driver `find "$(srcdir)" -type f -name \
442 Makefile.in -print` $(srcdir)/ChangeLog
443 pkgconfig_DATA = fontconfig.pc
444 baseconfigdir = $(BASECONFIGDIR)
445 configdir = $(CONFIGDIR)
448 @CROSS_COMPILING_FALSE@RUN_FC_CACHE_TEST = test -z "$(DESTDIR)"
449 @CROSS_COMPILING_TRUE@RUN_FC_CACHE_TEST = false
450 FC_CONFIGDIR = $(subst $(BASECONFIGDIR)/,,$(CONFIGDIR))
451 DISTCHECK_CONFIGURE_FLAGS =
453 $(MAKE) $(AM_MAKEFLAGS) all-recursive
456 am--refresh: Makefile
458 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
460 case '$(am__configure_deps)' in \
462 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
463 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
468 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
469 $(am__cd) $(top_srcdir) && \
470 $(AUTOMAKE) --gnu Makefile
472 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
475 echo ' $(SHELL) ./config.status'; \
476 $(SHELL) ./config.status;; \
478 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
479 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
482 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
483 $(SHELL) ./config.status --recheck
485 $(top_srcdir)/configure: $(am__configure_deps)
486 $(am__cd) $(srcdir) && $(AUTOCONF)
487 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
488 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
489 $(am__aclocal_m4_deps):
492 @test -f $@ || rm -f stamp-h1
493 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
495 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
497 cd $(top_builddir) && $(SHELL) ./config.status config.h
498 $(srcdir)/config.h.in: $(am__configure_deps)
499 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
504 -rm -f config.h stamp-h1
505 fontconfig.spec: $(top_builddir)/config.status $(srcdir)/fontconfig.spec.in
506 cd $(top_builddir) && $(SHELL) ./config.status $@
507 fontconfig.pc: $(top_builddir)/config.status $(srcdir)/fontconfig.pc.in
508 cd $(top_builddir) && $(SHELL) ./config.status $@
509 fontconfig-zip: $(top_builddir)/config.status $(srcdir)/fontconfig-zip.in
510 cd $(top_builddir) && $(SHELL) ./config.status $@
519 -rm -f libtool config.lt
520 install-pkgconfigDATA: $(pkgconfig_DATA)
522 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
523 if test -n "$$list"; then \
524 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
525 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
527 for p in $$list; do \
528 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
530 done | $(am__base_list) | \
531 while read files; do \
532 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
533 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
536 uninstall-pkgconfigDATA:
538 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
539 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
540 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
541 install-xmlDATA: $(xml_DATA)
543 @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
544 if test -n "$$list"; then \
545 echo " $(MKDIR_P) '$(DESTDIR)$(xmldir)'"; \
546 $(MKDIR_P) "$(DESTDIR)$(xmldir)" || exit 1; \
548 for p in $$list; do \
549 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
551 done | $(am__base_list) | \
552 while read files; do \
553 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(xmldir)'"; \
554 $(INSTALL_DATA) $$files "$(DESTDIR)$(xmldir)" || exit $$?; \
559 @list='$(xml_DATA)'; test -n "$(xmldir)" || list=; \
560 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
561 dir='$(DESTDIR)$(xmldir)'; $(am__uninstall_files_from_dir)
563 # This directory's subdirectories are mostly independent; you can cd
564 # into them and run 'make' without going through this Makefile.
565 # To change the values of 'make' variables: instead of editing Makefiles,
566 # (1) if the variable is set in 'config.status', edit 'config.status'
567 # (which will cause the Makefiles to be regenerated when you run 'make');
568 # (2) otherwise, pass the desired values on the 'make' command line.
569 $(am__recursive_targets):
571 if $(am__make_keepgoing); then \
572 failcom='fail=yes'; \
577 target=`echo $@ | sed s/-recursive//`; \
579 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
580 *) list='$(SUBDIRS)' ;; \
582 for subdir in $$list; do \
583 echo "Making $$target in $$subdir"; \
584 if test "$$subdir" = "."; then \
586 local_target="$$target-am"; \
588 local_target="$$target"; \
590 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
593 if test "$$dot_seen" = "no"; then \
594 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
597 ID: $(am__tagged_files)
598 $(am__define_uniq_tagged_files); mkid -fID $$unique
602 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
605 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
606 include_option=--etags-include; \
609 include_option=--include; \
612 list='$(SUBDIRS)'; for subdir in $$list; do \
613 if test "$$subdir" = .; then :; else \
614 test ! -f $$subdir/TAGS || \
615 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
618 $(am__define_uniq_tagged_files); \
620 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
621 test -n "$$unique" || unique=$$empty_fix; \
622 if test $$# -gt 0; then \
623 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
626 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
630 ctags: ctags-recursive
633 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
634 $(am__define_uniq_tagged_files); \
635 test -z "$(CTAGS_ARGS)$$unique" \
636 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
640 here=`$(am__cd) $(top_builddir) && pwd` \
641 && $(am__cd) $(top_srcdir) \
642 && gtags -i $(GTAGS_ARGS) "$$here"
644 test ! -s cscope.files \
645 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
648 cscope.files: clean-cscope cscopelist
649 cscopelist: cscopelist-recursive
651 cscopelist-am: $(am__tagged_files)
652 list='$(am__tagged_files)'; \
653 case "$(srcdir)" in \
654 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
655 *) sdir=$(subdir)/$(srcdir) ;; \
657 for i in $$list; do \
658 if test -f "$$i"; then \
659 echo "$(subdir)/$$i"; \
663 done >> $(top_builddir)/cscope.files
666 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
667 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
669 distdir: $(DISTFILES)
670 $(am__remove_distdir)
671 test -d "$(distdir)" || mkdir "$(distdir)"
672 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
673 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
674 list='$(DISTFILES)'; \
675 dist_files=`for file in $$list; do echo $$file; done | \
676 sed -e "s|^$$srcdirstrip/||;t" \
677 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
678 case $$dist_files in \
679 */*) $(MKDIR_P) `echo "$$dist_files" | \
680 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
683 for file in $$dist_files; do \
684 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
685 if test -d $$d/$$file; then \
686 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
687 if test -d "$(distdir)/$$file"; then \
688 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
690 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
691 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
692 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
694 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
696 test -f "$(distdir)/$$file" \
697 || cp -p $$d/$$file "$(distdir)/$$file" \
701 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
702 if test "$$subdir" = .; then :; else \
704 || test -d "$(distdir)/$$subdir" \
705 || $(MKDIR_P) "$(distdir)/$$subdir" \
707 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
709 new_distdir=$$reldir; \
710 dir1=$$subdir; dir2="$(top_distdir)"; \
712 new_top_distdir=$$reldir; \
713 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
714 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
715 ($(am__cd) $$subdir && \
716 $(MAKE) $(AM_MAKEFLAGS) \
717 top_distdir="$$new_top_distdir" \
718 distdir="$$new_distdir" \
719 am__remove_distdir=: \
720 am__skip_length_check=: \
721 am__skip_mode_fix=: \
726 -test -n "$(am__skip_mode_fix)" \
727 || find "$(distdir)" -type d ! -perm -755 \
728 -exec chmod u+rwx,go+rx {} \; -o \
729 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
730 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
731 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
732 || chmod -R a+r "$(distdir)"
734 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
735 $(am__post_remove_distdir)
737 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
738 $(am__post_remove_distdir)
741 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
742 $(am__post_remove_distdir)
745 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
746 $(am__post_remove_distdir)
749 @echo WARNING: "Support for shar distribution archives is" \
751 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
752 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
753 $(am__post_remove_distdir)
756 @echo WARNING: "Support for distribution archives compressed with" \
757 "legacy program 'compress' is deprecated." >&2
758 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
759 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
760 $(am__post_remove_distdir)
763 -rm -f $(distdir).zip
764 zip -rq $(distdir).zip $(distdir)
765 $(am__post_remove_distdir)
768 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
769 $(am__post_remove_distdir)
771 # This target untars the dist file and tries a VPATH configuration. Then
772 # it guarantees that the distribution is self-contained by making another
775 case '$(DIST_ARCHIVES)' in \
777 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
779 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
781 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
783 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
785 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
787 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
789 unzip $(distdir).zip ;;\
791 chmod -R a-w $(distdir)
793 mkdir $(distdir)/_build $(distdir)/_inst
795 test -d $(distdir)/_build || exit 0; \
796 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
797 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
799 && $(am__cd) $(distdir)/_build \
801 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
802 $(DISTCHECK_CONFIGURE_FLAGS) \
803 --srcdir=.. --prefix="$$dc_install_base" \
804 && $(MAKE) $(AM_MAKEFLAGS) \
805 && $(MAKE) $(AM_MAKEFLAGS) dvi \
806 && $(MAKE) $(AM_MAKEFLAGS) check \
807 && $(MAKE) $(AM_MAKEFLAGS) install \
808 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
809 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
810 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
812 && chmod -R a-w "$$dc_install_base" \
814 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
815 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
816 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
817 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
818 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
819 } || { rm -rf "$$dc_destdir"; exit 1; }) \
820 && rm -rf "$$dc_destdir" \
821 && $(MAKE) $(AM_MAKEFLAGS) dist \
822 && rm -rf $(DIST_ARCHIVES) \
823 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
826 $(am__post_remove_distdir)
827 @(echo "$(distdir) archives ready for distribution: "; \
828 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
829 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
831 @test -n '$(distuninstallcheck_dir)' || { \
832 echo 'ERROR: trying to run $@ with an empty' \
833 '$$(distuninstallcheck_dir)' >&2; \
836 $(am__cd) '$(distuninstallcheck_dir)' || { \
837 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
840 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
841 || { echo "ERROR: files left after uninstall:" ; \
842 if test -n "$(DESTDIR)"; then \
843 echo " (check DESTDIR support)"; \
845 $(distuninstallcheck_listfiles) ; \
847 distcleancheck: distclean
848 @if test '$(srcdir)' = . ; then \
849 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
852 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
853 || { echo "ERROR: files left in build directory after distclean:" ; \
854 $(distcleancheck_listfiles) ; \
857 check: check-recursive
858 all-am: Makefile $(DATA) config.h
859 installdirs: installdirs-recursive
861 for dir in "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(xmldir)"; do \
862 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
864 install: install-recursive
865 install-exec: install-exec-recursive
866 install-data: install-data-recursive
867 uninstall: uninstall-recursive
870 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
872 installcheck: installcheck-recursive
874 if test -z '$(STRIP)'; then \
875 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
876 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
879 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
880 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
881 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
886 -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
889 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
890 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
891 -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
893 maintainer-clean-generic:
894 @echo "This command is intended for maintainers to use"
895 @echo "it deletes files that may require special tools to rebuild."
896 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
897 clean: clean-recursive
899 clean-am: clean-generic clean-libtool mostlyclean-am
901 distclean: distclean-recursive
902 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
904 distclean-am: clean-am distclean-generic distclean-hdr \
905 distclean-libtool distclean-tags
919 install-data-am: install-data-local install-pkgconfigDATA \
922 install-dvi: install-dvi-recursive
928 install-html: install-html-recursive
932 install-info: install-info-recursive
938 install-pdf: install-pdf-recursive
942 install-ps: install-ps-recursive
948 maintainer-clean: maintainer-clean-recursive
949 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
950 -rm -rf $(top_srcdir)/autom4te.cache
952 maintainer-clean-am: distclean-am maintainer-clean-generic
954 mostlyclean: mostlyclean-recursive
956 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
966 uninstall-am: uninstall-local uninstall-pkgconfigDATA \
969 .MAKE: $(am__recursive_targets) all install-am install-strip
971 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
972 am--refresh check check-am clean clean-cscope clean-generic \
973 clean-libtool cscope cscopelist-am ctags ctags-am dist \
974 dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
975 dist-xz dist-zip distcheck distclean distclean-generic \
976 distclean-hdr distclean-libtool distclean-tags distcleancheck \
977 distdir distuninstallcheck dvi dvi-am html html-am info \
978 info-am install install-am install-data install-data-am \
979 install-data-local install-dvi install-dvi-am install-exec \
980 install-exec-am install-html install-html-am install-info \
981 install-info-am install-man install-pdf install-pdf-am \
982 install-pkgconfigDATA install-ps install-ps-am install-strip \
983 install-xmlDATA installcheck installcheck-am installdirs \
984 installdirs-am maintainer-clean maintainer-clean-generic \
985 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
986 ps ps-am tags tags-am uninstall uninstall-am uninstall-local \
987 uninstall-pkgconfigDATA uninstall-xmlDATA
989 ChangeLog: $(srcdir)/ChangeLog
991 if test -d "$(srcdir)/.git"; then \
992 (GIT_DIR=$(top_srcdir)/.git $(GIT) log --stat) | fmt --split-only > $@.tmp \
995 echo Failed to generate ChangeLog, your ChangeLog may be outdated >&2; \
996 (test -f $@ || echo git-log is required to generate this file >> $@)); \
999 (echo A git checkout and git-log is required to generate ChangeLog >&2 && \
1000 echo A git checkout and git-log is required to generate this file >> $@); \
1005 fonts.conf: fonts.conf.in Makefile
1007 -e 's,@FC_CACHEDIR\@,$(FC_CACHEDIR),g' \
1008 -e 's,@FC_DEFAULT_FONTS\@,$(FC_DEFAULT_FONTS),g' \
1009 -e 's,@FC_FONTPATH\@,$(FC_FONTPATH),g' \
1010 -e 's,@CONFIGDIR\@,$(FC_CONFIGDIR),g' \
1011 -e 's,@PACKAGE\@,$(PACKAGE),g' \
1012 -e 's,@VERSION\@,$(VERSION),g' \
1013 $(srcdir)/$@.in > $@.tmp && \
1016 install-data-local: fonts.conf
1017 $(mkinstalldirs) $(DESTDIR)$(baseconfigdir) $(DESTDIR)$(fc_cachedir)
1018 if [ -f $(DESTDIR)$(baseconfigdir)/fonts.conf ]; then \
1019 echo "backing up existing $(DESTDIR)$(baseconfigdir)/fonts.conf"; \
1020 mv $(DESTDIR)$(baseconfigdir)/fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf.bak; \
1022 if [ -f $(srcdir)/fonts.conf ]; then \
1023 echo " $(INSTALL_DATA) $(srcdir)/fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf"; \
1024 $(INSTALL_DATA) $(srcdir)/fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf; \
1025 else if [ -f fonts.conf ]; then \
1026 echo " $(INSTALL_DATA) fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf"; \
1027 $(INSTALL_DATA) fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf; \
1029 @(if $(RUN_FC_CACHE_TEST); then \
1030 echo "fc-cache$(EXEEXT) -s -f -v"; \
1031 fc-cache/fc-cache$(EXEEXT) -s -f -v; \
1034 echo "*** Warning: fonts.cache not built"; \
1036 echo "*** Generate this file manually on host system using fc-cache"; \
1041 if [ -f $(srcdir)/fonts.conf ]; then \
1042 if cmp -s $(srcdir)/fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf; then \
1043 echo " uninstall standard $(DESTDIR)$(baseconfigdir)/fonts.conf"; \
1044 $(RM) $(DESTDIR)$(baseconfigdir)/fonts.conf; \
1046 else if [ -f fonts.conf ]; then \
1047 if cmp -s fonts.conf $(DESTDIR)$(baseconfigdir)/fonts.conf; then \
1048 echo " uninstall standard $(DESTDIR)$(baseconfigdir)/fonts.conf"; \
1049 $(RM) $(DESTDIR)$(baseconfigdir)/fonts.conf; \
1053 debuild debuild-signed: debuild-dirs
1054 (cd $(distdir)/debian && debuild)
1056 debuild-unsigned: debuild-dirs
1057 (cd $(distdir)/debian && debuild -us -uc)
1059 debuild-dirs: distdir
1060 $(RM) $(PACKAGE)_$(VERSION).orig.tar.gz
1061 $(RM) -r $(distdir).orig
1062 cp -a $(distdir) $(distdir).orig
1063 $(RM) -r $(distdir).orig/debian
1065 -include $(top_srcdir)/git.mk
1067 # Tell versions [3.59,3.63) of GNU make to not export all variables.
1068 # Otherwise a system limit (for SysV at least) may be exceeded.