1 # Makefile.in generated by automake 1.14 from Makefile.am.
4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
6 # This Makefile.in is free software; the Free Software Foundation
7 # gives unlimited permission to copy and/or distribute it,
8 # with or without modifications, as long as this notice is preserved.
10 # This program is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 # Copyright © 2003 Keith Packard, Noah Levitt
20 # Permission to use, copy, modify, distribute, and sell this software and its
21 # documentation for any purpose is hereby granted without fee, provided that
22 # the above copyright notice appear in all copies and that both that
23 # copyright notice and this permission notice appear in supporting
24 # documentation, and that the name of Keith Packard not be used in
25 # advertising or publicity pertaining to distribution of the software without
26 # specific, written prior permission. Keith Packard makes no
27 # representations about the suitability of this software for any purpose. It
28 # is provided "as is" without express or implied warranty.
30 # KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
31 # INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
32 # EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR
33 # CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
34 # DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
35 # TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
36 # PERFORMANCE OF THIS SOFTWARE.
39 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
40 am__make_running_with_option = \
41 case $${target_option-} in \
43 *) echo "am__make_running_with_option: internal error: invalid" \
44 "target option '$${target_option-}' specified" >&2; \
48 sane_makeflags=$$MAKEFLAGS; \
49 if $(am__is_gnu_make); then \
50 sane_makeflags=$$MFLAGS; \
55 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
56 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
62 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
64 for flg in $$sane_makeflags; do \
65 test $$skip_next = yes && { skip_next=no; continue; }; \
68 -*I) strip_trailopt 'I'; skip_next=yes;; \
69 -*I?*) strip_trailopt 'I';; \
70 -*O) strip_trailopt 'O'; skip_next=yes;; \
71 -*O?*) strip_trailopt 'O';; \
72 -*l) strip_trailopt 'l'; skip_next=yes;; \
73 -*l?*) strip_trailopt 'l';; \
74 -[dEDm]) skip_next=yes;; \
75 -[JT]) skip_next=yes;; \
78 *$$target_option*) has_opt=yes; break;; \
82 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
83 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
84 pkgdatadir = $(datadir)/@PACKAGE@
85 pkgincludedir = $(includedir)/@PACKAGE@
86 pkglibdir = $(libdir)/@PACKAGE@
87 pkglibexecdir = $(libexecdir)/@PACKAGE@
88 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
89 install_sh_DATA = $(install_sh) -c -m 644
90 install_sh_PROGRAM = $(install_sh) -c
91 install_sh_SCRIPT = $(install_sh) -c
92 INSTALL_HEADER = $(INSTALL_DATA)
93 transform = $(program_transform_name)
100 build_triplet = @build@
101 host_triplet = @host@
103 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
104 $(top_srcdir)/configure $(am__configure_deps) \
105 $(srcdir)/config.h.in $(top_srcdir)/include/X11/Xft/Xft.h.in \
106 $(srcdir)/xft.pc.in AUTHORS COPYING ChangeLog INSTALL NEWS \
107 README compile config.guess config.sub install-sh missing \
109 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
110 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
111 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
113 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
114 configure.lineno config.status.lineno
115 mkinstalldirs = $(install_sh) -d
116 CONFIG_HEADER = config.h $(top_builddir)/include/X11/Xft/Xft.h
117 CONFIG_CLEAN_FILES = xft.pc
118 CONFIG_CLEAN_VPATH_FILES =
119 AM_V_P = $(am__v_P_@AM_V@)
120 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
123 AM_V_GEN = $(am__v_GEN_@AM_V@)
124 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
125 am__v_GEN_0 = @echo " GEN " $@;
127 AM_V_at = $(am__v_at_@AM_V@)
128 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
133 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
134 ctags-recursive dvi-recursive html-recursive info-recursive \
135 install-data-recursive install-dvi-recursive \
136 install-exec-recursive install-html-recursive \
137 install-info-recursive install-pdf-recursive \
138 install-ps-recursive install-recursive installcheck-recursive \
139 installdirs-recursive pdf-recursive ps-recursive \
140 tags-recursive uninstall-recursive
141 am__can_run_installinfo = \
142 case $$AM_UPDATE_INFO_DIR in \
144 *) (install-info --version) >/dev/null 2>&1;; \
146 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
147 am__vpath_adj = case $$p in \
148 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
151 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
153 am__nobase_strip_setup = \
154 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
156 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
157 am__nobase_list = $(am__nobase_strip_setup); \
158 for p in $$list; do echo "$$p $$p"; done | \
159 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
160 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
161 if (++n[$$2] == $(am__install_max)) \
162 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
163 END { for (dir in files) print dir, files[dir] }'
165 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
166 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
167 am__uninstall_files_from_dir = { \
169 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
170 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
171 $(am__cd) "$$dir" && rm -f $$files; }; \
173 am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
174 DATA = $(pkgconfig_DATA)
175 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
176 distclean-recursive maintainer-clean-recursive
177 am__recursive_targets = \
178 $(RECURSIVE_TARGETS) \
179 $(RECURSIVE_CLEAN_TARGETS) \
180 $(am__extra_recursive_targets)
181 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
182 cscope distdir dist dist-all distcheck
183 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
185 # Read a list of newline-separated strings from the standard input,
186 # and print each of them once, without duplicates. Input order is
188 am__uniquify_input = $(AWK) '\
189 BEGIN { nonempty = 0; } \
190 { items[$$0] = 1; nonempty = 1; } \
191 END { if (nonempty) { for (i in items) print i; }; } \
193 # Make sure the list of sources is unique. This is necessary because,
194 # e.g., the same source file might be shared among _SOURCES variables
195 # for different programs/libraries.
196 am__define_uniq_tagged_files = \
197 list='$(am__tagged_files)'; \
198 unique=`for i in $$list; do \
199 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
200 done | $(am__uniquify_input)`
204 DIST_SUBDIRS = $(SUBDIRS)
205 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
206 distdir = $(PACKAGE)-$(VERSION)
207 top_distdir = $(distdir)
208 am__remove_distdir = \
209 if test -d "$(distdir)"; then \
210 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
211 && rm -rf "$(distdir)" \
212 || { sleep 5 && rm -rf "$(distdir)"; }; \
214 am__post_remove_distdir = $(am__remove_distdir)
217 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
218 sed_rest='s,^[^/]*/*,,'; \
219 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
220 sed_butlast='s,/*[^/]*$$,,'; \
221 while test -n "$$dir1"; do \
222 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
223 if test "$$first" != "."; then \
224 if test "$$first" = ".."; then \
225 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
226 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
228 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
229 if test "$$first2" = "$$first"; then \
230 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
234 dir0="$$dir0"/"$$first"; \
237 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
240 DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
242 DIST_TARGETS = dist-bzip2 dist-gzip
243 distuninstallcheck_listfiles = find . -type f -print
244 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
245 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
246 distcleancheck_listfiles = find . -type f -print
248 ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
249 ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
251 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
252 APP_MAN_DIR = @APP_MAN_DIR@
253 APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
255 AUTOCONF = @AUTOCONF@
256 AUTOHEADER = @AUTOHEADER@
257 AUTOMAKE = @AUTOMAKE@
259 BASE_CFLAGS = @BASE_CFLAGS@
261 CCDEPMODE = @CCDEPMODE@
263 CHANGELOG_CMD = @CHANGELOG_CMD@
265 CPPFLAGS = @CPPFLAGS@
266 CWARNFLAGS = @CWARNFLAGS@
267 CYGPATH_W = @CYGPATH_W@
271 DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
272 DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
273 DSYMUTIL = @DSYMUTIL@
281 FILE_MAN_DIR = @FILE_MAN_DIR@
282 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
283 FONTCONFIG_CFLAGS = @FONTCONFIG_CFLAGS@
284 FONTCONFIG_LIBS = @FONTCONFIG_LIBS@
285 FREETYPE_CFLAGS = @FREETYPE_CFLAGS@
286 FREETYPE_LIBS = @FREETYPE_LIBS@
289 INSTALL_CMD = @INSTALL_CMD@
290 INSTALL_DATA = @INSTALL_DATA@
291 INSTALL_PROGRAM = @INSTALL_PROGRAM@
292 INSTALL_SCRIPT = @INSTALL_SCRIPT@
293 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
299 LIB_MAN_DIR = @LIB_MAN_DIR@
300 LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
303 LTLIBOBJS = @LTLIBOBJS@
304 MAKEINFO = @MAKEINFO@
305 MANIFEST_TOOL = @MANIFEST_TOOL@
306 MAN_SUBSTS = @MAN_SUBSTS@
307 MISC_MAN_DIR = @MISC_MAN_DIR@
308 MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
317 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
318 PACKAGE_NAME = @PACKAGE_NAME@
319 PACKAGE_STRING = @PACKAGE_STRING@
320 PACKAGE_TARNAME = @PACKAGE_TARNAME@
321 PACKAGE_URL = @PACKAGE_URL@
322 PACKAGE_VERSION = @PACKAGE_VERSION@
323 PATH_SEPARATOR = @PATH_SEPARATOR@
324 PKG_CONFIG = @PKG_CONFIG@
327 SET_MAKE = @SET_MAKE@
329 STRICT_CFLAGS = @STRICT_CFLAGS@
332 XFT_LT_VERSION = @XFT_LT_VERSION@
333 XORG_MAN_PAGE = @XORG_MAN_PAGE@
334 XRENDER_CFLAGS = @XRENDER_CFLAGS@
335 XRENDER_LIBS = @XRENDER_LIBS@
336 abs_builddir = @abs_builddir@
337 abs_srcdir = @abs_srcdir@
338 abs_top_builddir = @abs_top_builddir@
339 abs_top_srcdir = @abs_top_srcdir@
340 ac_ct_AR = @ac_ct_AR@
341 ac_ct_CC = @ac_ct_CC@
342 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
343 am__include = @am__include@
344 am__leading_dot = @am__leading_dot@
345 am__quote = @am__quote@
347 am__untar = @am__untar@
350 build_alias = @build_alias@
351 build_cpu = @build_cpu@
352 build_os = @build_os@
353 build_vendor = @build_vendor@
354 builddir = @builddir@
356 datarootdir = @datarootdir@
359 exec_prefix = @exec_prefix@
361 host_alias = @host_alias@
362 host_cpu = @host_cpu@
364 host_vendor = @host_vendor@
366 includedir = @includedir@
368 install_sh = @install_sh@
370 libexecdir = @libexecdir@
371 localedir = @localedir@
372 localstatedir = @localstatedir@
375 oldincludedir = @oldincludedir@
378 program_transform_name = @program_transform_name@
381 sharedstatedir = @sharedstatedir@
383 sysconfdir = @sysconfdir@
384 target_alias = @target_alias@
385 top_build_prefix = @top_build_prefix@
386 top_builddir = @top_builddir@
387 top_srcdir = @top_srcdir@
389 pkgconfigdir = $(libdir)/pkgconfig
390 pkgconfig_DATA = xft.pc
391 MAINTAINERCLEANFILES = ChangeLog INSTALL
393 $(MAKE) $(AM_MAKEFLAGS) all-recursive
396 am--refresh: Makefile
398 $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
400 case '$(am__configure_deps)' in \
402 echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
403 $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
408 echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
409 $(am__cd) $(top_srcdir) && \
410 $(AUTOMAKE) --foreign Makefile
412 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
415 echo ' $(SHELL) ./config.status'; \
416 $(SHELL) ./config.status;; \
418 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
419 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
422 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
423 $(SHELL) ./config.status --recheck
425 $(top_srcdir)/configure: $(am__configure_deps)
426 $(am__cd) $(srcdir) && $(AUTOCONF)
427 $(ACLOCAL_M4): $(am__aclocal_m4_deps)
428 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
429 $(am__aclocal_m4_deps):
432 @test -f $@ || rm -f stamp-h1
433 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
435 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
437 cd $(top_builddir) && $(SHELL) ./config.status config.h
438 $(srcdir)/config.h.in: $(am__configure_deps)
439 ($(am__cd) $(top_srcdir) && $(AUTOHEADER))
443 include/X11/Xft/Xft.h: include/X11/Xft/stamp-h2
444 @test -f $@ || rm -f include/X11/Xft/stamp-h2
445 @test -f $@ || $(MAKE) $(AM_MAKEFLAGS) include/X11/Xft/stamp-h2
447 include/X11/Xft/stamp-h2: $(top_srcdir)/include/X11/Xft/Xft.h.in $(top_builddir)/config.status
448 @rm -f include/X11/Xft/stamp-h2
449 cd $(top_builddir) && $(SHELL) ./config.status include/X11/Xft/Xft.h
452 -rm -f config.h stamp-h1 include/X11/Xft/Xft.h include/X11/Xft/stamp-h2
453 xft.pc: $(top_builddir)/config.status $(srcdir)/xft.pc.in
454 cd $(top_builddir) && $(SHELL) ./config.status $@
463 -rm -f libtool config.lt
464 install-pkgconfigDATA: $(pkgconfig_DATA)
466 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
467 if test -n "$$list"; then \
468 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
469 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
471 for p in $$list; do \
472 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
474 done | $(am__base_list) | \
475 while read files; do \
476 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
477 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
480 uninstall-pkgconfigDATA:
482 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
483 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
484 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
486 # This directory's subdirectories are mostly independent; you can cd
487 # into them and run 'make' without going through this Makefile.
488 # To change the values of 'make' variables: instead of editing Makefiles,
489 # (1) if the variable is set in 'config.status', edit 'config.status'
490 # (which will cause the Makefiles to be regenerated when you run 'make');
491 # (2) otherwise, pass the desired values on the 'make' command line.
492 $(am__recursive_targets):
494 if $(am__make_keepgoing); then \
495 failcom='fail=yes'; \
500 target=`echo $@ | sed s/-recursive//`; \
502 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
503 *) list='$(SUBDIRS)' ;; \
505 for subdir in $$list; do \
506 echo "Making $$target in $$subdir"; \
507 if test "$$subdir" = "."; then \
509 local_target="$$target-am"; \
511 local_target="$$target"; \
513 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
516 if test "$$dot_seen" = "no"; then \
517 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
520 ID: $(am__tagged_files)
521 $(am__define_uniq_tagged_files); mkid -fID $$unique
525 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
528 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
529 include_option=--etags-include; \
532 include_option=--include; \
535 list='$(SUBDIRS)'; for subdir in $$list; do \
536 if test "$$subdir" = .; then :; else \
537 test ! -f $$subdir/TAGS || \
538 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
541 $(am__define_uniq_tagged_files); \
543 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
544 test -n "$$unique" || unique=$$empty_fix; \
545 if test $$# -gt 0; then \
546 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
549 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
553 ctags: ctags-recursive
556 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
557 $(am__define_uniq_tagged_files); \
558 test -z "$(CTAGS_ARGS)$$unique" \
559 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
563 here=`$(am__cd) $(top_builddir) && pwd` \
564 && $(am__cd) $(top_srcdir) \
565 && gtags -i $(GTAGS_ARGS) "$$here"
567 test ! -s cscope.files \
568 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
571 cscope.files: clean-cscope cscopelist
572 cscopelist: cscopelist-recursive
574 cscopelist-am: $(am__tagged_files)
575 list='$(am__tagged_files)'; \
576 case "$(srcdir)" in \
577 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
578 *) sdir=$(subdir)/$(srcdir) ;; \
580 for i in $$list; do \
581 if test -f "$$i"; then \
582 echo "$(subdir)/$$i"; \
586 done >> $(top_builddir)/cscope.files
589 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
590 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
592 distdir: $(DISTFILES)
593 $(am__remove_distdir)
594 test -d "$(distdir)" || mkdir "$(distdir)"
595 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
596 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
597 list='$(DISTFILES)'; \
598 dist_files=`for file in $$list; do echo $$file; done | \
599 sed -e "s|^$$srcdirstrip/||;t" \
600 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
601 case $$dist_files in \
602 */*) $(MKDIR_P) `echo "$$dist_files" | \
603 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
606 for file in $$dist_files; do \
607 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
608 if test -d $$d/$$file; then \
609 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
610 if test -d "$(distdir)/$$file"; then \
611 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
613 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
614 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
615 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
617 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
619 test -f "$(distdir)/$$file" \
620 || cp -p $$d/$$file "$(distdir)/$$file" \
624 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
625 if test "$$subdir" = .; then :; else \
627 || test -d "$(distdir)/$$subdir" \
628 || $(MKDIR_P) "$(distdir)/$$subdir" \
630 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
632 new_distdir=$$reldir; \
633 dir1=$$subdir; dir2="$(top_distdir)"; \
635 new_top_distdir=$$reldir; \
636 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
637 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
638 ($(am__cd) $$subdir && \
639 $(MAKE) $(AM_MAKEFLAGS) \
640 top_distdir="$$new_top_distdir" \
641 distdir="$$new_distdir" \
642 am__remove_distdir=: \
643 am__skip_length_check=: \
644 am__skip_mode_fix=: \
649 $(MAKE) $(AM_MAKEFLAGS) \
650 top_distdir="$(top_distdir)" distdir="$(distdir)" \
652 -test -n "$(am__skip_mode_fix)" \
653 || find "$(distdir)" -type d ! -perm -755 \
654 -exec chmod u+rwx,go+rx {} \; -o \
655 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
656 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
657 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
658 || chmod -R a+r "$(distdir)"
660 tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
661 $(am__post_remove_distdir)
663 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
664 $(am__post_remove_distdir)
667 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
668 $(am__post_remove_distdir)
671 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
672 $(am__post_remove_distdir)
675 @echo WARNING: "Support for shar distribution archives is" \
677 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
678 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
679 $(am__post_remove_distdir)
682 @echo WARNING: "Support for distribution archives compressed with" \
683 "legacy program 'compress' is deprecated." >&2
684 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
685 shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
686 $(am__post_remove_distdir)
689 -rm -f $(distdir).zip
690 zip -rq $(distdir).zip $(distdir)
691 $(am__post_remove_distdir)
694 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
695 $(am__post_remove_distdir)
697 # This target untars the dist file and tries a VPATH configuration. Then
698 # it guarantees that the distribution is self-contained by making another
701 case '$(DIST_ARCHIVES)' in \
703 GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
705 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
707 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
709 xz -dc $(distdir).tar.xz | $(am__untar) ;;\
711 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
713 GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
715 unzip $(distdir).zip ;;\
717 chmod -R a-w $(distdir)
719 mkdir $(distdir)/_build $(distdir)/_inst
721 test -d $(distdir)/_build || exit 0; \
722 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
723 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
725 && $(am__cd) $(distdir)/_build \
726 && ../configure --srcdir=.. --prefix="$$dc_install_base" \
727 $(AM_DISTCHECK_CONFIGURE_FLAGS) \
728 $(DISTCHECK_CONFIGURE_FLAGS) \
729 && $(MAKE) $(AM_MAKEFLAGS) \
730 && $(MAKE) $(AM_MAKEFLAGS) dvi \
731 && $(MAKE) $(AM_MAKEFLAGS) check \
732 && $(MAKE) $(AM_MAKEFLAGS) install \
733 && $(MAKE) $(AM_MAKEFLAGS) installcheck \
734 && $(MAKE) $(AM_MAKEFLAGS) uninstall \
735 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
737 && chmod -R a-w "$$dc_install_base" \
739 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
740 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
741 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
742 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
743 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
744 } || { rm -rf "$$dc_destdir"; exit 1; }) \
745 && rm -rf "$$dc_destdir" \
746 && $(MAKE) $(AM_MAKEFLAGS) dist \
747 && rm -rf $(DIST_ARCHIVES) \
748 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
751 $(am__post_remove_distdir)
752 @(echo "$(distdir) archives ready for distribution: "; \
753 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
754 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
756 @test -n '$(distuninstallcheck_dir)' || { \
757 echo 'ERROR: trying to run $@ with an empty' \
758 '$$(distuninstallcheck_dir)' >&2; \
761 $(am__cd) '$(distuninstallcheck_dir)' || { \
762 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
765 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
766 || { echo "ERROR: files left after uninstall:" ; \
767 if test -n "$(DESTDIR)"; then \
768 echo " (check DESTDIR support)"; \
770 $(distuninstallcheck_listfiles) ; \
772 distcleancheck: distclean
773 @if test '$(srcdir)' = . ; then \
774 echo "ERROR: distcleancheck can only run from a VPATH build" ; \
777 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
778 || { echo "ERROR: files left in build directory after distclean:" ; \
779 $(distcleancheck_listfiles) ; \
782 check: check-recursive
783 all-am: Makefile $(DATA) config.h
784 installdirs: installdirs-recursive
786 for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
787 test -z "$$dir" || $(MKDIR_P) "$$dir"; \
789 install: install-recursive
790 install-exec: install-exec-recursive
791 install-data: install-data-recursive
792 uninstall: uninstall-recursive
795 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
797 installcheck: installcheck-recursive
799 if test -z '$(STRIP)'; then \
800 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
801 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
804 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
805 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
806 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
813 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
814 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
816 maintainer-clean-generic:
817 @echo "This command is intended for maintainers to use"
818 @echo "it deletes files that may require special tools to rebuild."
819 -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
820 clean: clean-recursive
822 clean-am: clean-generic clean-libtool mostlyclean-am
824 distclean: distclean-recursive
825 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
827 distclean-am: clean-am distclean-generic distclean-hdr \
828 distclean-libtool distclean-tags
842 install-data-am: install-pkgconfigDATA
844 install-dvi: install-dvi-recursive
850 install-html: install-html-recursive
854 install-info: install-info-recursive
860 install-pdf: install-pdf-recursive
864 install-ps: install-ps-recursive
870 maintainer-clean: maintainer-clean-recursive
871 -rm -f $(am__CONFIG_DISTCLEAN_FILES)
872 -rm -rf $(top_srcdir)/autom4te.cache
874 maintainer-clean-am: distclean-am maintainer-clean-generic
876 mostlyclean: mostlyclean-recursive
878 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
888 uninstall-am: uninstall-pkgconfigDATA
890 .MAKE: $(am__recursive_targets) all install-am install-strip
892 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
893 am--refresh check check-am clean clean-cscope clean-generic \
894 clean-libtool cscope cscopelist-am ctags ctags-am dist \
895 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \
896 dist-tarZ dist-xz dist-zip distcheck distclean \
897 distclean-generic distclean-hdr distclean-libtool \
898 distclean-tags distcleancheck distdir distuninstallcheck dvi \
899 dvi-am html html-am info info-am install install-am \
900 install-data install-data-am install-dvi install-dvi-am \
901 install-exec install-exec-am install-html install-html-am \
902 install-info install-info-am install-man install-pdf \
903 install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
904 install-strip installcheck installcheck-am installdirs \
905 installdirs-am maintainer-clean maintainer-clean-generic \
906 mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
907 ps ps-am tags tags-am uninstall uninstall-am \
908 uninstall-pkgconfigDATA
911 .PHONY: ChangeLog INSTALL
919 dist-hook: ChangeLog INSTALL
921 # Tell versions [3.59,3.63) of GNU make to not export all variables.
922 # Otherwise a system limit (for SysV at least) may be exceeded.