Merge branch 'master' of git://git.denx.de/u-boot-nds32
[kernel/u-boot.git] / MAKEALL
1 #!/bin/bash
2 # Tool mainly for U-Boot Quality Assurance: build one or more board
3 # configurations with minimal verbosity, showing only warnings and
4 # errors.
5 #
6 # SPDX-License-Identifier:      GPL-2.0+
7
8 usage()
9 {
10         # if exiting with 0, write to stdout, else write to stderr
11         local ret=${1:-0}
12         [ "${ret}" -eq 1 ] && exec 1>&2
13         cat <<-EOF
14         Usage: MAKEALL [options] [--] [boards-to-build]
15
16         Options:
17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
20           -s SOC,    --soc SOC         Build all boards with soc SOC
21           -l,        --list            List all targets to be built
22           -m,        --maintainers     List all targets and maintainer email
23           -M,        --mails           List all targets and all affilated emails
24           -C,        --check           Enable build checking
25           -n,        --continue        Continue (skip boards already built)
26           -r,        --rebuild-errors  Rebuild any boards that errored
27           -h,        --help            This help output
28
29         Selections by these options are logically ANDed; if the same option
30         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
31         will select all configurations where the vendor is either FOO or
32         BAR.  Any additional arguments specified on the command line are
33         always build additionally.  See the boards.cfg file for more info.
34
35         If no boards are specified, then the default is "powerpc".
36
37         Environment variables:
38           BUILD_NCPUS      number of parallel make jobs (default: auto)
39           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
40           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
41                            architecture "ARCH".  Substitute "ARCH" for any
42                            supported architecture (default: "")
43           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
44           BUILD_DIR        output build directory (default: ./)
45           BUILD_NBUILDS    number of parallel targets (default: 1)
46
47         Examples:
48           - build all Power Architecture boards:
49               MAKEALL -a powerpc
50               MAKEALL --arch powerpc
51               MAKEALL powerpc
52           - build all PowerPC boards manufactured by vendor "esd":
53               MAKEALL -a powerpc -v esd
54           - build all PowerPC boards manufactured either by "keymile" or "siemens":
55               MAKEALL -a powerpc -v keymile -v siemens
56           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
57               MAKEALL -c mpc83xx -v freescale 4xx
58         EOF
59         exit ${ret}
60 }
61
62 SHORT_OPTS="ha:c:v:s:lmMCnr"
63 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
64
65 # Option processing based on util-linux-2.13/getopt-parse.bash
66
67 # Note that we use `"$@"' to let each command-line parameter expand to a
68 # separate word. The quotes around `$@' are essential!
69 # We need TEMP as the `eval set --' would nuke the return value of
70 # getopt.
71 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
72      -n 'MAKEALL' -- "$@"`
73
74 [ $? != 0 ] && usage 1
75
76 # Note the quotes around `$TEMP': they are essential!
77 eval set -- "$TEMP"
78
79 SELECTED=''
80 ONLY_LIST=''
81 PRINT_MAINTS=''
82 MAINTAINERS_ONLY=''
83 CONTINUE=''
84 REBUILD_ERRORS=''
85
86 while true ; do
87         case "$1" in
88         -a|--arch)
89                 # echo "Option ARCH: argument \`$2'"
90                 if [ "$opt_a" ] ; then
91                         opt_a="${opt_a%)} || \$2 == \"$2\")"
92                 else
93                         opt_a="(\$2 == \"$2\")"
94                 fi
95                 SELECTED='y'
96                 shift 2 ;;
97         -c|--cpu)
98                 # echo "Option CPU: argument \`$2'"
99                 if [ "$opt_c" ] ; then
100                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
101                 else
102                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
103                 fi
104                 SELECTED='y'
105                 shift 2 ;;
106         -s|--soc)
107                 # echo "Option SoC: argument \`$2'"
108                 if [ "$opt_s" ] ; then
109                         opt_s="${opt_s%)} || \$6 == \"$2\" || \$6 ~ /$2/)"
110                 else
111                         opt_s="(\$6 == \"$2\" || \$6 ~ /$2/)"
112                 fi
113                 SELECTED='y'
114                 shift 2 ;;
115         -v|--vendor)
116                 # echo "Option VENDOR: argument \`$2'"
117                 if [ "$opt_v" ] ; then
118                         opt_v="${opt_v%)} || \$5 == \"$2\")"
119                 else
120                         opt_v="(\$5 == \"$2\")"
121                 fi
122                 SELECTED='y'
123                 shift 2 ;;
124         -C|--check)
125                 CHECK='C=1'
126                 shift ;;
127         -n|--continue)
128                 CONTINUE='y'
129                 shift ;;
130         -r|--rebuild-errors)
131                 REBUILD_ERRORS='y'
132                 shift ;;
133         -l|--list)
134                 ONLY_LIST='y'
135                 shift ;;
136         -m|--maintainers)
137                 ONLY_LIST='y'
138                 PRINT_MAINTS='y'
139                 MAINTAINERS_ONLY='y'
140                 shift ;;
141         -M|--mails)
142                 ONLY_LIST='y'
143                 PRINT_MAINTS='y'
144                 shift ;;
145         -h|--help)
146                 usage ;;
147         --)
148                 shift ; break ;;
149         *)
150                 echo "Internal error!" >&2 ; exit 1 ;;
151         esac
152 done
153 # echo "Remaining arguments:"
154 # for arg do echo '--> '"\`$arg'" ; done
155
156 FILTER="\$1 !~ /^#/"
157 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
158 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
159 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
160 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
161
162 if [ "$SELECTED" ] ; then
163         SELECTED=$(awk '('"$FILTER"') { print $1 }' boards.cfg)
164
165         # Make sure some boards from boards.cfg are actually found
166         if [ -z "$SELECTED" ] ; then
167                 echo "Error: No boards selected, invalid arguments"
168                 exit 1
169         fi
170 fi
171
172 #########################################################################
173
174 # Print statistics when we exit
175 trap exit 1 2 3 15
176 trap print_stats 0
177
178 # Determine number of CPU cores if no default was set
179 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
180
181 if [ "$BUILD_NCPUS" -gt 1 ]
182 then
183         JOBS="-j $((BUILD_NCPUS + 1))"
184 else
185         JOBS=""
186 fi
187
188 if [ "${MAKEALL_LOGDIR}" ] ; then
189         LOG_DIR=${MAKEALL_LOGDIR}
190 else
191         LOG_DIR="LOG"
192 fi
193
194 : ${BUILD_NBUILDS:=1}
195 BUILD_MANY=0
196
197 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
198         BUILD_MANY=1
199         : ${BUILD_DIR:=./build}
200         mkdir -p "${BUILD_DIR}/ERR"
201         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
202 fi
203
204 : ${BUILD_DIR:=.}
205
206 OUTPUT_PREFIX="${BUILD_DIR}"
207
208 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
209 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
210         find "${LOG_DIR}/" -type f -exec rm -f {} +
211 fi
212
213 LIST=""
214
215 # Keep track of the number of builds and errors
216 ERR_CNT=0
217 ERR_LIST=""
218 WRN_CNT=0
219 WRN_LIST=""
220 TOTAL_CNT=0
221 SKIP_CNT=0
222 CURRENT_CNT=0
223 OLDEST_IDX=1
224 RC=0
225
226 # Helper funcs for parsing boards.cfg
227 boards_by_field()
228 {
229         FS="[ \t]+"
230         [ -n "$3" ] && FS="$3"
231         awk \
232                 -v field="$1" \
233                 -v select="$2" \
234                 -F "$FS" \
235                 '($1 !~ /^#/ && $field == select) { print $1 }' \
236                 boards.cfg
237 }
238 boards_by_arch() { boards_by_field 2 "$@" ; }
239 boards_by_cpu()  { boards_by_field 3 "$@" "[: \t]+" ; }
240 boards_by_soc()  { boards_by_field 6 "$@" ; }
241
242 #########################################################################
243 ## MPC5xx Systems
244 #########################################################################
245
246 LIST_5xx="$(boards_by_cpu mpc5xx)"
247
248 #########################################################################
249 ## MPC5xxx Systems
250 #########################################################################
251
252 LIST_5xxx="$(boards_by_cpu mpc5xxx)"
253
254 #########################################################################
255 ## MPC512x Systems
256 #########################################################################
257
258 LIST_512x="$(boards_by_cpu mpc512x)"
259
260 #########################################################################
261 ## MPC8xx Systems
262 #########################################################################
263
264 LIST_8xx="$(boards_by_cpu mpc8xx)"
265
266 #########################################################################
267 ## PPC4xx Systems
268 #########################################################################
269
270 LIST_4xx="$(boards_by_cpu ppc4xx)"
271
272 #########################################################################
273 ## MPC824x Systems
274 #########################################################################
275
276 LIST_824x="$(boards_by_cpu mpc824x)"
277
278 #########################################################################
279 ## MPC8260 Systems (includes 8250, 8255 etc.)
280 #########################################################################
281
282 LIST_8260="$(boards_by_cpu mpc8260)"
283
284 #########################################################################
285 ## MPC83xx Systems (includes 8349, etc.)
286 #########################################################################
287
288 LIST_83xx="$(boards_by_cpu mpc83xx)"
289
290 #########################################################################
291 ## MPC85xx Systems (includes 8540, 8560 etc.)
292 #########################################################################
293
294 LIST_85xx="$(boards_by_cpu mpc85xx)"
295
296 #########################################################################
297 ## MPC86xx Systems
298 #########################################################################
299
300 LIST_86xx="$(boards_by_cpu mpc86xx)"
301
302 #########################################################################
303 ## 74xx/7xx Systems
304 #########################################################################
305
306 LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)"
307
308 #########################################################################
309 ## PowerPC groups
310 #########################################################################
311
312 LIST_TSEC="             \
313         ${LIST_83xx}    \
314         ${LIST_85xx}    \
315         ${LIST_86xx}    \
316 "
317
318 LIST_powerpc="          \
319         ${LIST_5xx}     \
320         ${LIST_512x}    \
321         ${LIST_5xxx}    \
322         ${LIST_8xx}     \
323         ${LIST_824x}    \
324         ${LIST_8260}    \
325         ${LIST_83xx}    \
326         ${LIST_85xx}    \
327         ${LIST_86xx}    \
328         ${LIST_4xx}     \
329         ${LIST_74xx_7xx}\
330 "
331
332 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
333 # still using "ppc" instead of "powerpc"
334 LIST_ppc="              \
335         ${LIST_powerpc} \
336 "
337
338 #########################################################################
339 ## StrongARM Systems
340 #########################################################################
341
342 LIST_SA="$(boards_by_cpu sa1100)"
343
344 #########################################################################
345 ## ARM7 Systems
346 #########################################################################
347
348 LIST_ARM7="$(boards_by_cpu arm720t)"
349
350 #########################################################################
351 ## ARM9 Systems
352 #########################################################################
353
354 LIST_ARM9="$(boards_by_cpu arm920t)     \
355         $(boards_by_cpu arm926ejs)      \
356         $(boards_by_cpu arm925t)        \
357         $(boards_by_cpu arm946es)       \
358 "
359
360 #########################################################################
361 ## ARM11 Systems
362 #########################################################################
363 LIST_ARM11="$(boards_by_cpu arm1136)    \
364         $(boards_by_cpu arm1176)        \
365 "
366
367 #########################################################################
368 ## ARMV7 Systems
369 #########################################################################
370
371 LIST_ARMV7="$(boards_by_cpu armv7)"
372
373 #########################################################################
374 ## AT91 Systems
375 #########################################################################
376
377 LIST_at91="$(boards_by_soc at91)"
378
379 #########################################################################
380 ## Xscale Systems
381 #########################################################################
382
383 LIST_pxa="$(boards_by_cpu pxa)"
384
385 LIST_ixp="$(boards_by_cpu ixp)"
386
387 #########################################################################
388 ## SPEAr Systems
389 #########################################################################
390
391 LIST_spear="$(boards_by_soc spear)"
392
393 #########################################################################
394 ## ARM groups
395 #########################################################################
396
397 LIST_arm="$(boards_by_arch arm)"
398
399 #########################################################################
400 ## MIPS Systems         (default = big endian)
401 #########################################################################
402
403 LIST_mips4kc="          \
404         incaip          \
405         incaip_100MHz   \
406         incaip_133MHz   \
407         incaip_150MHz   \
408         qemu_mips       \
409         vct_platinum    \
410         vct_platinum_small      \
411         vct_platinum_onenand    \
412         vct_platinum_onenand_small      \
413         vct_platinumavc \
414         vct_platinumavc_small   \
415         vct_platinumavc_onenand \
416         vct_platinumavc_onenand_small   \
417         vct_premium     \
418         vct_premium_small       \
419         vct_premium_onenand     \
420         vct_premium_onenand_small       \
421 "
422
423 LIST_au1xx0="           \
424         dbau1000        \
425         dbau1100        \
426         dbau1500        \
427         dbau1550        \
428 "
429
430 LIST_mips="             \
431         ${LIST_mips4kc} \
432         ${LIST_mips5kc} \
433         ${LIST_au1xx0}  \
434 "
435
436 #########################################################################
437 ## MIPS Systems         (little endian)
438 #########################################################################
439
440 LIST_au1xx0_el="        \
441         dbau1550_el     \
442         pb1000          \
443 "
444 LIST_mips_el="                  \
445         ${LIST_au1xx0_el}       \
446 "
447 #########################################################################
448 ## OpenRISC Systems
449 #########################################################################
450
451 LIST_openrisc="$(boards_by_arch openrisc)"
452
453 #########################################################################
454 ## x86 Systems
455 #########################################################################
456
457 LIST_x86="$(boards_by_arch x86)"
458
459 #########################################################################
460 ## Nios-II Systems
461 #########################################################################
462
463 LIST_nios2="$(boards_by_arch nios2)"
464
465 #########################################################################
466 ## MicroBlaze Systems
467 #########################################################################
468
469 LIST_microblaze="$(boards_by_arch microblaze)"
470
471 #########################################################################
472 ## ColdFire Systems
473 #########################################################################
474
475 LIST_m68k="$(boards_by_arch m68k)"
476 LIST_coldfire=${LIST_m68k}
477
478 #########################################################################
479 ## AVR32 Systems
480 #########################################################################
481
482 LIST_avr32="$(boards_by_arch avr32)"
483
484 #########################################################################
485 ## Blackfin Systems
486 #########################################################################
487
488 LIST_blackfin="$(boards_by_arch blackfin)"
489
490 #########################################################################
491 ## SH Systems
492 #########################################################################
493
494 LIST_sh2="$(boards_by_cpu sh2)"
495 LIST_sh3="$(boards_by_cpu sh3)"
496 LIST_sh4="$(boards_by_cpu sh4)"
497
498 LIST_sh="$(boards_by_arch sh)"
499
500 #########################################################################
501 ## SPARC Systems
502 #########################################################################
503
504 LIST_sparc="$(boards_by_arch sparc)"
505
506 #########################################################################
507 ## NDS32 Systems
508 #########################################################################
509
510 LIST_nds32="$(boards_by_arch nds32)"
511
512 #-----------------------------------------------------------------------
513
514 get_target_location() {
515         local target=$1
516         local BOARD_NAME=""
517         local CONFIG_NAME=""
518         local board=""
519         local vendor=""
520
521         # Automatic mode
522         local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
523
524         if [ -z "${line}" ] ; then echo "" ; return ; fi
525
526         set ${line}
527
528         # add default board name if needed
529         [ $# = 3 ] && set ${line} ${1}
530
531         CONFIG_NAME="${1%_config}"
532
533         [ "${BOARD_NAME}" ] || BOARD_NAME="${1%_config}"
534
535         if [ "$4" = "-" ] ; then
536                 board=${BOARD_NAME}
537         else
538                 board="$4"
539         fi
540
541         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
542         [ $# -gt 6 ] && [ "$7" != "-" ] && {
543                 tmp="${7%:*}"
544                 if [ "$tmp" ] ; then
545                         CONFIG_NAME="$tmp"
546                 fi
547         }
548
549         # Assign board directory to BOARDIR variable
550         if [ -z "${vendor}" ] ; then
551             BOARDDIR=${board}
552         else
553             BOARDDIR=${vendor}/${board}
554         fi
555
556         echo "${CONFIG_NAME}:${BOARDDIR}"
557 }
558
559 get_target_maintainers() {
560         local name=`echo $1 | cut -d : -f 1`
561
562         if ! grep -qsi "[[:blank:]]${name}[[:blank:]]" MAINTAINERS ; then
563                 echo ""
564                 return ;
565         fi
566
567         local line=`tac MAINTAINERS | grep -ni "[[:blank:]]${name}[[:blank:]]" | cut -d : -f 1`
568         local mail=`tac MAINTAINERS | tail -n +${line} | \
569                 sed -n ":start /.*@.*/ { b mail } ; n ; b start ; :mail /.*@.*/ { p ; n ; b mail } ; q" | \
570                 sed "s/^.*<//;s/>.*$//"`
571         echo "$mail"
572 }
573
574 get_target_arch() {
575         local target=$1
576
577         # Automatic mode
578         local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
579
580         if [ -z "${line}" ] ; then echo "" ; return ; fi
581
582         set ${line}
583         echo "$2"
584 }
585
586 list_target() {
587         if [ "$PRINT_MAINTS" != 'y' ] ; then
588                 echo "$1"
589                 return
590         fi
591
592         echo -n "$1:"
593
594         local loc=`get_target_location $1`
595
596         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
597
598         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
599
600         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
601
602                 local dir=`echo ${loc} | cut -d ":" -f 2`
603                 local cfg=`echo ${loc} | cut -d ":" -f 1`
604                 local git_result=`git log --format=%aE board/${dir} \
605                                 include/configs/${cfg}.h | grep "@"`
606                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
607                                                 head -n 3`
608                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
609                         sort | uniq -c | sort -nr | head -n 3 | \
610                         sed "s/^ \+[0-9]\+ \+//"`
611
612                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
613                         sort -u | tr "\n" " " | sed "s/ $//" ;
614         else
615                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
616                                                 sed "s/ $//" ;
617         fi
618
619         echo ""
620 }
621
622 # Each finished build will have a file called ${donep}${n},
623 # where n is the index of the build. Each build
624 # we've already noted as finished will have ${skipp}${n}.
625 # The code managing the build process will use this information
626 # to ensure that only BUILD_NBUILDS builds are in flight at once
627 donep="${LOG_DIR}/._done_"
628 skipp="${LOG_DIR}/._skip_"
629
630 build_target_killed() {
631         echo "Aborted $target build."
632         # Remove the logs for this board since it was aborted
633         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
634         exit
635 }
636
637 build_target() {
638         target=$1
639         build_idx=$2
640
641         if [ "$ONLY_LIST" == 'y' ] ; then
642                 list_target ${target}
643                 return
644         fi
645
646         if [ $BUILD_MANY == 1 ] ; then
647                 output_dir="${OUTPUT_PREFIX}/${target}"
648                 mkdir -p "${output_dir}"
649                 trap build_target_killed TERM
650         else
651                 output_dir="${OUTPUT_PREFIX}"
652         fi
653
654         export BUILD_DIR="${output_dir}"
655
656         target_arch=$(get_target_arch ${target})
657         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
658         if [ "${cross_toolchain}" ] ; then
659             MAKE="make CROSS_COMPILE=${cross_toolchain}"
660         elif [ "${CROSS_COMPILE}" ] ; then
661             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
662         else
663             MAKE=make
664         fi
665
666         ${MAKE} distclean >/dev/null
667         ${MAKE} -s ${target}_config
668
669         ${MAKE} ${JOBS} ${CHECK} all \
670                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
671
672         # Check for 'make' errors
673         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
674                 RC=1
675         fi
676
677         if [ $BUILD_MANY == 1 ] ; then
678                 trap - TERM
679
680                 ${MAKE} -s tidy
681
682                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
683                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
684                 else
685                         rm ${LOG_DIR}/${target}.ERR
686                 fi
687         else
688                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
689                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
690                                 : $(( ERR_CNT += 1 ))
691                                 ERR_LIST="${ERR_LIST} $target"
692                         else
693                                 : $(( WRN_CNT += 1 ))
694                                 WRN_LIST="${WRN_LIST} $target"
695                         fi
696                 else
697                         rm ${LOG_DIR}/${target}.ERR
698                 fi
699         fi
700
701         OBJS=${output_dir}/u-boot
702         if [ -e ${output_dir}/spl/u-boot-spl ]; then
703                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
704         fi
705
706         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
707
708         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
709
710         touch "${donep}${build_idx}"
711 }
712
713 manage_builds() {
714         search_idx=${OLDEST_IDX}
715         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
716
717         while true; do
718                 if [ -e "${donep}${search_idx}" ] ; then
719                         : $(( CURRENT_CNT-- ))
720                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
721                                 : $(( OLDEST_IDX++ ))
722
723                         # Only want to count it once
724                         rm -f "${donep}${search_idx}"
725                         touch "${skipp}${search_idx}"
726                 elif [ -e "${skipp}${search_idx}" ] ; then
727                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
728                                 : $(( OLDEST_IDX++ ))
729                 fi
730                 : $(( search_idx++ ))
731                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
732                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
733                                 search_idx=${OLDEST_IDX}
734                                 sleep 1
735                         else
736                                 break
737                         fi
738                 fi
739         done
740 }
741
742 build_targets() {
743         for t in "$@" ; do
744                 # If a LIST_xxx var exists, use it.  But avoid variable
745                 # expansion in the eval when a board name contains certain
746                 # characters that the shell interprets.
747                 case ${t} in
748                         *[-+=]*) list= ;;
749                         *)       list=$(eval echo '${LIST_'$t'}') ;;
750                 esac
751                 if [ -n "${list}" ] ; then
752                         build_targets ${list}
753                 else
754                         : $((TOTAL_CNT += 1))
755                         : $((CURRENT_CNT += 1))
756                         rm -f "${donep}${TOTAL_CNT}"
757                         rm -f "${skipp}${TOTAL_CNT}"
758                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
759                                 : $((SKIP_CNT += 1))
760                                 touch "${donep}${TOTAL_CNT}"
761                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
762                                 : $((SKIP_CNT += 1))
763                                 touch "${donep}${TOTAL_CNT}"
764                         else
765                                 if [ $BUILD_MANY == 1 ] ; then
766                                         build_target ${t} ${TOTAL_CNT} &
767                                 else
768                                         CUR_TGT="${t}"
769                                         build_target ${t} ${TOTAL_CNT}
770                                         CUR_TGT=''
771                                 fi
772                         fi
773                 fi
774
775                 # We maintain a running count of all the builds we have done.
776                 # Each finished build will have a file called ${donep}${n},
777                 # where n is the index of the build. Each build
778                 # we've already noted as finished will have ${skipp}${n}.
779                 # We track the current index via TOTAL_CNT, and the oldest
780                 # index. When we exceed the maximum number of parallel builds,
781                 # We look from oldest to current for builds that have completed,
782                 # and update the current count and oldest index as appropriate.
783                 # If we've gone through the entire list, wait a second, and
784                 # reprocess the entire list until we find a build that has
785                 # completed
786                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
787                         manage_builds
788                 fi
789         done
790 }
791
792 #-----------------------------------------------------------------------
793
794 kill_children() {
795         local OS=$(uname -s)
796         local children=""
797         case "${OS}" in
798                 "Darwin")
799                         # Mac OS X is known to have BSD style ps
800                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
801                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
802                         ;;
803                 *)
804                         # everything else tries the GNU style
805                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
806                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
807                         ;;
808         esac
809
810         kill $children 2> /dev/null
811         wait $children 2> /dev/null
812
813         exit
814 }
815
816 print_stats() {
817         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
818
819         # Only count boards that completed
820         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
821
822         rm -f ${donep}* ${skipp}*
823
824         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
825                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
826                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
827                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
828                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
829                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
830                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
831         else
832                 # Remove the logs for any board that was interrupted
833                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
834         fi
835
836         : $((TOTAL_CNT -= ${SKIP_CNT}))
837         echo ""
838         echo "--------------------- SUMMARY ----------------------------"
839         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
840                 echo "Boards skipped: ${SKIP_CNT}"
841         fi
842         echo "Boards compiled: ${TOTAL_CNT}"
843         if [ ${ERR_CNT} -gt 0 ] ; then
844                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
845         fi
846         if [ ${WRN_CNT} -gt 0 ] ; then
847                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
848         fi
849         echo "----------------------------------------------------------"
850
851         if [ $BUILD_MANY == 1 ] ; then
852                 kill_children
853         fi
854
855         exit $RC
856 }
857
858 #-----------------------------------------------------------------------
859
860 # Build target groups selected by options, plus any command line args
861 set -- ${SELECTED} "$@"
862 # run PowerPC by default
863 [ $# = 0 ] && set -- powerpc
864 build_targets "$@"
865 wait