MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -l,        --list            List all targets to be built
  22           -m,        --maintainers     List all targets and maintainer email
  23           -M,        --mails           List all targets and all affilated emails
  24           -C,        --check           Enable build checking
  25           -n,        --continue        Continue (skip boards already built)
  26           -r,        --rebuild-errors  Rebuild any boards that errored
  27           -h,        --help            This help output
  28
  29         Selections by these options are logically ANDed; if the same option
  30         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  31         will select all configurations where the vendor is either FOO or
  32         BAR.  Any additional arguments specified on the command line are
  33         always build additionally.  See the boards.cfg file for more info.
  34
  35         If no boards are specified, then the default is "powerpc".
  36
  37         Environment variables:
  38           BUILD_NCPUS      number of parallel make jobs (default: auto)
  39           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  40           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  41                            architecture "ARCH".  Substitute "ARCH" for any
  42                            supported architecture (default: "")
  43           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  44           BUILD_DIR        output build directory (default: ./)
  45           BUILD_NBUILDS    number of parallel targets (default: 1)
  46
  47         Examples:
  48           - build all Power Architecture boards:
  49               MAKEALL -a powerpc
  50               MAKEALL --arch powerpc
  51               MAKEALL powerpc
  52           - build all PowerPC boards manufactured by vendor "esd":
  53               MAKEALL -a powerpc -v esd
  54           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  55               MAKEALL -a powerpc -v keymile -v siemens
  56           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  57               MAKEALL -c mpc83xx -v freescale 4xx
  58         EOF
  59         exit ${ret}
  60 }
  61
  62 SHORT_OPTS="ha:c:v:s:lmMCnr"
  63 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,list,maintainers,mails,check,continue,rebuild-errors"
  64
  65 # Option processing based on util-linux-2.13/getopt-parse.bash
  66
  67 # Note that we use `"$@"' to let each command-line parameter expand to a
  68 # separate word. The quotes around `$@' are essential!
  69 # We need TEMP as the `eval set --' would nuke the return value of
  70 # getopt.
  71 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  72      -n 'MAKEALL' -- "$@"`
  73
  74 [ $? != 0 ] && usage 1
  75
  76 # Note the quotes around `$TEMP': they are essential!
  77 eval set -- "$TEMP"
  78
  79 SELECTED=''
  80 ONLY_LIST=''
  81 PRINT_MAINTS=''
  82 MAINTAINERS_ONLY=''
  83 CONTINUE=''
  84 REBUILD_ERRORS=''
  85
  86 while true ; do
  87         case "$1" in
  88         -a|--arch)
  89                 # echo "Option ARCH: argument \`$2'"
  90                 if [ "$opt_a" ] ; then
  91                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  92                 else
  93                         opt_a="(\$2 == \"$2\")"
  94                 fi
  95                 SELECTED='y'
  96                 shift 2 ;;
  97         -c|--cpu)
  98                 # echo "Option CPU: argument \`$2'"
  99                 if [ "$opt_c" ] ; then
 100                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 101                 else
 102                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 103                 fi
 104                 SELECTED='y'
 105                 shift 2 ;;
 106         -s|--soc)
 107                 # echo "Option SoC: argument \`$2'"
 108                 if [ "$opt_s" ] ; then
 109                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 110                 else
 111                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 112                 fi
 113                 SELECTED='y'
 114                 shift 2 ;;
 115         -v|--vendor)
 116                 # echo "Option VENDOR: argument \`$2'"
 117                 if [ "$opt_v" ] ; then
 118                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 119                 else
 120                         opt_v="(\$5 == \"$2\")"
 121                 fi
 122                 SELECTED='y'
 123                 shift 2 ;;
 124         -C|--check)
 125                 CHECK='C=1'
 126                 shift ;;
 127         -n|--continue)
 128                 CONTINUE='y'
 129                 shift ;;
 130         -r|--rebuild-errors)
 131                 REBUILD_ERRORS='y'
 132                 shift ;;
 133         -l|--list)
 134                 ONLY_LIST='y'
 135                 shift ;;
 136         -m|--maintainers)
 137                 ONLY_LIST='y'
 138                 PRINT_MAINTS='y'
 139                 MAINTAINERS_ONLY='y'
 140                 shift ;;
 141         -M|--mails)
 142                 ONLY_LIST='y'
 143                 PRINT_MAINTS='y'
 144                 shift ;;
 145         -h|--help)
 146                 usage ;;
 147         --)
 148                 shift ; break ;;
 149         *)
 150                 echo "Internal error!" >&2 ; exit 1 ;;
 151         esac
 152 done
 153 # echo "Remaining arguments:"
 154 # for arg do echo '--> '"\`$arg'" ; done
 155
 156 FILTER="\$1 !~ /^#/"
 157 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 158 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 159 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 160 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 161
 162 if [ "$SELECTED" ] ; then
 163         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 164
 165         # Make sure some boards from boards.cfg are actually found
 166         if [ -z "$SELECTED" ] ; then
 167                 echo "Error: No boards selected, invalid arguments"
 168                 exit 1
 169         fi
 170 fi
 171
 172 #########################################################################
 173
 174 # Print statistics when we exit
 175 trap exit 1 2 3 15
 176 trap print_stats 0
 177
 178 # Determine number of CPU cores if no default was set
 179 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 180
 181 if [ "$BUILD_NCPUS" -gt 1 ]
 182 then
 183         JOBS="-j $((BUILD_NCPUS + 1))"
 184 else
 185         JOBS=""
 186 fi
 187
 188 if [ "${MAKEALL_LOGDIR}" ] ; then
 189         LOG_DIR=${MAKEALL_LOGDIR}
 190 else
 191         LOG_DIR="LOG"
 192 fi
 193
 194 : ${BUILD_NBUILDS:=1}
 195 BUILD_MANY=0
 196
 197 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 198         BUILD_MANY=1
 199         : ${BUILD_DIR:=./build}
 200         mkdir -p "${BUILD_DIR}/ERR"
 201         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 202 fi
 203
 204 : ${BUILD_DIR:=.}
 205
 206 OUTPUT_PREFIX="${BUILD_DIR}"
 207
 208 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 209 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 210         find "${LOG_DIR}/" -type f -exec rm -f {} +
 211 fi
 212
 213 LIST=""
 214
 215 # Keep track of the number of builds and errors
 216 ERR_CNT=0
 217 ERR_LIST=""
 218 WRN_CNT=0
 219 WRN_LIST=""
 220 TOTAL_CNT=0
 221 SKIP_CNT=0
 222 CURRENT_CNT=0
 223 OLDEST_IDX=1
 224 RC=0
 225
 226 # Helper funcs for parsing boards.cfg
 227 boards_by_field()
 228 {
 229         FS="[ \t]+"
 230         [ -n "$3" ] && FS="$3"
 231         awk \
 232                 -v field="$1" \
 233                 -v select="$2" \
 234                 -F "$FS" \
 235                 '($1 !~ /^#/ && $field == select) { print $7 }' \
 236                 boards.cfg
 237 }
 238 boards_by_arch() { boards_by_field 2 "$@" ; }
 239 boards_by_cpu()  { boards_by_field 3 "$@" "[: \t]+" ; }
 240 boards_by_soc()  { boards_by_field 4 "$@" ; }
 241
 242 #########################################################################
 243 ## MPC5xx Systems
 244 #########################################################################
 245
 246 LIST_5xx="$(boards_by_cpu mpc5xx)"
 247
 248 #########################################################################
 249 ## MPC5xxx Systems
 250 #########################################################################
 251
 252 LIST_5xxx="$(boards_by_cpu mpc5xxx)"
 253
 254 #########################################################################
 255 ## MPC512x Systems
 256 #########################################################################
 257
 258 LIST_512x="$(boards_by_cpu mpc512x)"
 259
 260 #########################################################################
 261 ## MPC8xx Systems
 262 #########################################################################
 263
 264 LIST_8xx="$(boards_by_cpu mpc8xx)"
 265
 266 #########################################################################
 267 ## PPC4xx Systems
 268 #########################################################################
 269
 270 LIST_4xx="$(boards_by_cpu ppc4xx)"
 271
 272 #########################################################################
 273 ## MPC824x Systems
 274 #########################################################################
 275
 276 LIST_824x="$(boards_by_cpu mpc824x)"
 277
 278 #########################################################################
 279 ## MPC8260 Systems (includes 8250, 8255 etc.)
 280 #########################################################################
 281
 282 LIST_8260="$(boards_by_cpu mpc8260)"
 283
 284 #########################################################################
 285 ## MPC83xx Systems (includes 8349, etc.)
 286 #########################################################################
 287
 288 LIST_83xx="$(boards_by_cpu mpc83xx)"
 289
 290 #########################################################################
 291 ## MPC85xx Systems (includes 8540, 8560 etc.)
 292 #########################################################################
 293
 294 LIST_85xx="$(boards_by_cpu mpc85xx)"
 295
 296 #########################################################################
 297 ## MPC86xx Systems
 298 #########################################################################
 299
 300 LIST_86xx="$(boards_by_cpu mpc86xx)"
 301
 302 #########################################################################
 303 ## 74xx/7xx Systems
 304 #########################################################################
 305
 306 LIST_74xx_7xx="$(boards_by_cpu 74xx_7xx)"
 307
 308 #########################################################################
 309 ## PowerPC groups
 310 #########################################################################
 311
 312 LIST_TSEC="             \
 313         ${LIST_83xx}    \
 314         ${LIST_85xx}    \
 315         ${LIST_86xx}    \
 316 "
 317
 318 LIST_powerpc="          \
 319         ${LIST_5xx}     \
 320         ${LIST_512x}    \
 321         ${LIST_5xxx}    \
 322         ${LIST_8xx}     \
 323         ${LIST_824x}    \
 324         ${LIST_8260}    \
 325         ${LIST_83xx}    \
 326         ${LIST_85xx}    \
 327         ${LIST_86xx}    \
 328         ${LIST_4xx}     \
 329         ${LIST_74xx_7xx}\
 330 "
 331
 332 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 333 # still using "ppc" instead of "powerpc"
 334 LIST_ppc="              \
 335         ${LIST_powerpc} \
 336 "
 337
 338 #########################################################################
 339 ## StrongARM Systems
 340 #########################################################################
 341
 342 LIST_SA="$(boards_by_cpu sa1100)"
 343
 344 #########################################################################
 345 ## ARM7 Systems
 346 #########################################################################
 347
 348 LIST_ARM7="$(boards_by_cpu arm720t)"
 349
 350 #########################################################################
 351 ## ARM9 Systems
 352 #########################################################################
 353
 354 LIST_ARM9="$(boards_by_cpu arm920t)     \
 355         $(boards_by_cpu arm926ejs)      \
 356         $(boards_by_cpu arm925t)        \
 357         $(boards_by_cpu arm946es)       \
 358 "
 359
 360 #########################################################################
 361 ## ARM11 Systems
 362 #########################################################################
 363 LIST_ARM11="$(boards_by_cpu arm1136)    \
 364         $(boards_by_cpu arm1176)        \
 365 "
 366
 367 #########################################################################
 368 ## ARMV7 Systems
 369 #########################################################################
 370
 371 LIST_ARMV7="$(boards_by_cpu armv7)"
 372
 373 #########################################################################
 374 ## AT91 Systems
 375 #########################################################################
 376
 377 LIST_at91="$(boards_by_soc at91)"
 378
 379 #########################################################################
 380 ## Xscale Systems
 381 #########################################################################
 382
 383 LIST_pxa="$(boards_by_cpu pxa)"
 384
 385 LIST_ixp="$(boards_by_cpu ixp)"
 386
 387 #########################################################################
 388 ## SPEAr Systems
 389 #########################################################################
 390
 391 LIST_spear="$(boards_by_soc spear)"
 392
 393 #########################################################################
 394 ## ARM groups
 395 #########################################################################
 396
 397 LIST_arm="$(boards_by_arch arm)"
 398
 399 #########################################################################
 400 ## MIPS Systems         (default = big endian)
 401 #########################################################################
 402
 403 LIST_mips4kc="          \
 404         incaip          \
 405         incaip_100MHz   \
 406         incaip_133MHz   \
 407         incaip_150MHz   \
 408         qemu_mips       \
 409         vct_platinum    \
 410         vct_platinum_small      \
 411         vct_platinum_onenand    \
 412         vct_platinum_onenand_small      \
 413         vct_platinumavc \
 414         vct_platinumavc_small   \
 415         vct_platinumavc_onenand \
 416         vct_platinumavc_onenand_small   \
 417         vct_premium     \
 418         vct_premium_small       \
 419         vct_premium_onenand     \
 420         vct_premium_onenand_small       \
 421 "
 422
 423 LIST_au1xx0="           \
 424         dbau1000        \
 425         dbau1100        \
 426         dbau1500        \
 427         dbau1550        \
 428 "
 429
 430 LIST_mips="             \
 431         ${LIST_mips4kc} \
 432         ${LIST_mips5kc} \
 433         ${LIST_au1xx0}  \
 434 "
 435
 436 #########################################################################
 437 ## MIPS Systems         (little endian)
 438 #########################################################################
 439
 440 LIST_au1xx0_el="        \
 441         dbau1550_el     \
 442         pb1000          \
 443 "
 444 LIST_mips_el="                  \
 445         ${LIST_au1xx0_el}       \
 446 "
 447 #########################################################################
 448 ## OpenRISC Systems
 449 #########################################################################
 450
 451 LIST_openrisc="$(boards_by_arch openrisc)"
 452
 453 #########################################################################
 454 ## x86 Systems
 455 #########################################################################
 456
 457 LIST_x86="$(boards_by_arch x86)"
 458
 459 #########################################################################
 460 ## Nios-II Systems
 461 #########################################################################
 462
 463 LIST_nios2="$(boards_by_arch nios2)"
 464
 465 #########################################################################
 466 ## MicroBlaze Systems
 467 #########################################################################
 468
 469 LIST_microblaze="$(boards_by_arch microblaze)"
 470
 471 #########################################################################
 472 ## ColdFire Systems
 473 #########################################################################
 474
 475 LIST_m68k="$(boards_by_arch m68k)"
 476 LIST_coldfire=${LIST_m68k}
 477
 478 #########################################################################
 479 ## AVR32 Systems
 480 #########################################################################
 481
 482 LIST_avr32="$(boards_by_arch avr32)"
 483
 484 #########################################################################
 485 ## Blackfin Systems
 486 #########################################################################
 487
 488 LIST_blackfin="$(boards_by_arch blackfin)"
 489
 490 #########################################################################
 491 ## SH Systems
 492 #########################################################################
 493
 494 LIST_sh2="$(boards_by_cpu sh2)"
 495 LIST_sh3="$(boards_by_cpu sh3)"
 496 LIST_sh4="$(boards_by_cpu sh4)"
 497
 498 LIST_sh="$(boards_by_arch sh)"
 499
 500 #########################################################################
 501 ## SPARC Systems
 502 #########################################################################
 503
 504 LIST_sparc="$(boards_by_arch sparc)"
 505
 506 #########################################################################
 507 ## NDS32 Systems
 508 #########################################################################
 509
 510 LIST_nds32="$(boards_by_arch nds32)"
 511
 512 #-----------------------------------------------------------------------
 513
 514 get_target_location() {
 515         local target=$1
 516         local BOARD_NAME=""
 517         local CONFIG_NAME=""
 518         local board=""
 519         local vendor=""
 520
 521         # Automatic mode
 522         local line=`awk -F '\ +' '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 523         if [ -z "${line}" ] ; then echo "" ; return ; fi
 524
 525         set ${line}
 526
 527         CONFIG_NAME="${7%_config}"
 528
 529         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_config}"
 530
 531         if [ $# -gt 5 ]; then
 532                 if [ "$6" = "-" ] ; then
 533                         board=${BOARD_NAME}
 534                 else
 535                         board="$6"
 536                 fi
 537         fi
 538
 539         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 540         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 541                 tmp="${8%:*}"
 542                 if [ "$tmp" ] ; then
 543                         CONFIG_NAME="$tmp"
 544                 fi
 545         }
 546
 547         # Assign board directory to BOARDIR variable
 548         if [ "${vendor}" == "-" ] ; then
 549             BOARDDIR=${board}
 550         else
 551             BOARDDIR=${vendor}/${board}
 552         fi
 553
 554         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 555 }
 556
 557 get_target_maintainers() {
 558         local name=`echo $1 | cut -d : -f 3`
 559
 560         local line=`awk -F '\ +' '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 561         if [ -z "${line}" ]; then
 562                 echo ""
 563                 return ;
 564         fi
 565
 566         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 567         [ "$mails" == "-" ] && mails=""
 568         echo "$mails"
 569 }
 570
 571 get_target_arch() {
 572         local target=$1
 573
 574         # Automatic mode
 575         local line=`egrep -i "^[[:space:]]*${target}[[:space:]]" boards.cfg`
 576
 577         if [ -z "${line}" ] ; then echo "" ; return ; fi
 578
 579         set ${line}
 580         echo "$2"
 581 }
 582
 583 list_target() {
 584         if [ "$PRINT_MAINTS" != 'y' ] ; then
 585                 echo "$1"
 586                 return
 587         fi
 588
 589         echo -n "$1:"
 590
 591         local loc=`get_target_location $1`
 592
 593         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 594
 595         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 596
 597         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 598
 599                 local dir=`echo ${loc} | cut -d ":" -f 2`
 600                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 601                 local git_result=`git log --format=%aE board/${dir} \
 602                                 include/configs/${cfg}.h | grep "@"`
 603                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 604                                                 head -n 3`
 605                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 606                         sort | uniq -c | sort -nr | head -n 3 | \
 607                         sed "s/^ \+[0-9]\+ \+//"`
 608
 609                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 610                         sort -u | tr "\n" " " | sed "s/ $//" ;
 611         else
 612                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 613                                                 sed "s/ $//" ;
 614         fi
 615
 616         echo ""
 617 }
 618
 619 # Each finished build will have a file called ${donep}${n},
 620 # where n is the index of the build. Each build
 621 # we've already noted as finished will have ${skipp}${n}.
 622 # The code managing the build process will use this information
 623 # to ensure that only BUILD_NBUILDS builds are in flight at once
 624 donep="${LOG_DIR}/._done_"
 625 skipp="${LOG_DIR}/._skip_"
 626
 627 build_target_killed() {
 628         echo "Aborted $target build."
 629         # Remove the logs for this board since it was aborted
 630         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 631         exit
 632 }
 633
 634 build_target() {
 635         target=$1
 636         build_idx=$2
 637
 638         if [ "$ONLY_LIST" == 'y' ] ; then
 639                 list_target ${target}
 640                 return
 641         fi
 642
 643         if [ $BUILD_MANY == 1 ] ; then
 644                 output_dir="${OUTPUT_PREFIX}/${target}"
 645                 mkdir -p "${output_dir}"
 646                 trap build_target_killed TERM
 647         else
 648                 output_dir="${OUTPUT_PREFIX}"
 649         fi
 650
 651         export BUILD_DIR="${output_dir}"
 652
 653         target_arch=$(get_target_arch ${target})
 654         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 655         if [ "${cross_toolchain}" ] ; then
 656             MAKE="make CROSS_COMPILE=${cross_toolchain}"
 657         elif [ "${CROSS_COMPILE}" ] ; then
 658             MAKE="make CROSS_COMPILE=${CROSS_COMPILE}"
 659         else
 660             MAKE=make
 661         fi
 662
 663         ${MAKE} distclean >/dev/null
 664         ${MAKE} -s ${target}_config
 665
 666         ${MAKE} ${JOBS} ${CHECK} all \
 667                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 668
 669         # Check for 'make' errors
 670         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 671                 RC=1
 672         fi
 673
 674         if [ $BUILD_MANY == 1 ] ; then
 675                 trap - TERM
 676
 677                 ${MAKE} -s tidy
 678
 679                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 680                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 681                 else
 682                         rm ${LOG_DIR}/${target}.ERR
 683                 fi
 684         else
 685                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 686                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 687                                 : $(( ERR_CNT += 1 ))
 688                                 ERR_LIST="${ERR_LIST} $target"
 689                         else
 690                                 : $(( WRN_CNT += 1 ))
 691                                 WRN_LIST="${WRN_LIST} $target"
 692                         fi
 693                 else
 694                         rm ${LOG_DIR}/${target}.ERR
 695                 fi
 696         fi
 697
 698         OBJS=${output_dir}/u-boot
 699         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 700                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 701         fi
 702
 703         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 704
 705         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 706
 707         touch "${donep}${build_idx}"
 708 }
 709
 710 manage_builds() {
 711         search_idx=${OLDEST_IDX}
 712         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 713
 714         while true; do
 715                 if [ -e "${donep}${search_idx}" ] ; then
 716                         : $(( CURRENT_CNT-- ))
 717                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 718                                 : $(( OLDEST_IDX++ ))
 719
 720                         # Only want to count it once
 721                         rm -f "${donep}${search_idx}"
 722                         touch "${skipp}${search_idx}"
 723                 elif [ -e "${skipp}${search_idx}" ] ; then
 724                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 725                                 : $(( OLDEST_IDX++ ))
 726                 fi
 727                 : $(( search_idx++ ))
 728                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 729                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 730                                 search_idx=${OLDEST_IDX}
 731                                 sleep 1
 732                         else
 733                                 break
 734                         fi
 735                 fi
 736         done
 737 }
 738
 739 build_targets() {
 740         for t in "$@" ; do
 741                 # If a LIST_xxx var exists, use it.  But avoid variable
 742                 # expansion in the eval when a board name contains certain
 743                 # characters that the shell interprets.
 744                 case ${t} in
 745                         *[-+=]*) list= ;;
 746                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 747                 esac
 748                 if [ -n "${list}" ] ; then
 749                         build_targets ${list}
 750                 else
 751                         : $((TOTAL_CNT += 1))
 752                         : $((CURRENT_CNT += 1))
 753                         rm -f "${donep}${TOTAL_CNT}"
 754                         rm -f "${skipp}${TOTAL_CNT}"
 755                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 756                                 : $((SKIP_CNT += 1))
 757                                 touch "${donep}${TOTAL_CNT}"
 758                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 759                                 : $((SKIP_CNT += 1))
 760                                 touch "${donep}${TOTAL_CNT}"
 761                         else
 762                                 if [ $BUILD_MANY == 1 ] ; then
 763                                         build_target ${t} ${TOTAL_CNT} &
 764                                 else
 765                                         CUR_TGT="${t}"
 766                                         build_target ${t} ${TOTAL_CNT}
 767                                         CUR_TGT=''
 768                                 fi
 769                         fi
 770                 fi
 771
 772                 # We maintain a running count of all the builds we have done.
 773                 # Each finished build will have a file called ${donep}${n},
 774                 # where n is the index of the build. Each build
 775                 # we've already noted as finished will have ${skipp}${n}.
 776                 # We track the current index via TOTAL_CNT, and the oldest
 777                 # index. When we exceed the maximum number of parallel builds,
 778                 # We look from oldest to current for builds that have completed,
 779                 # and update the current count and oldest index as appropriate.
 780                 # If we've gone through the entire list, wait a second, and
 781                 # reprocess the entire list until we find a build that has
 782                 # completed
 783                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 784                         manage_builds
 785                 fi
 786         done
 787 }
 788
 789 #-----------------------------------------------------------------------
 790
 791 kill_children() {
 792         local OS=$(uname -s)
 793         local children=""
 794         case "${OS}" in
 795                 "Darwin")
 796                         # Mac OS X is known to have BSD style ps
 797                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 798                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 799                         ;;
 800                 *)
 801                         # everything else tries the GNU style
 802                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 803                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 804                         ;;
 805         esac
 806
 807         kill $children 2> /dev/null
 808         wait $children 2> /dev/null
 809
 810         exit
 811 }
 812
 813 print_stats() {
 814         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 815
 816         # Only count boards that completed
 817         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 818
 819         rm -f ${donep}* ${skipp}*
 820
 821         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 822                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 823                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 824                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 825                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 826                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 827                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 828         else
 829                 # Remove the logs for any board that was interrupted
 830                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 831         fi
 832
 833         : $((TOTAL_CNT -= ${SKIP_CNT}))
 834         echo ""
 835         echo "--------------------- SUMMARY ----------------------------"
 836         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 837                 echo "Boards skipped: ${SKIP_CNT}"
 838         fi
 839         echo "Boards compiled: ${TOTAL_CNT}"
 840         if [ ${ERR_CNT} -gt 0 ] ; then
 841                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 842         fi
 843         if [ ${WRN_CNT} -gt 0 ] ; then
 844                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 845         fi
 846         echo "----------------------------------------------------------"
 847
 848         if [ $BUILD_MANY == 1 ] ; then
 849                 kill_children
 850         fi
 851
 852         exit $RC
 853 }
 854
 855 #-----------------------------------------------------------------------
 856
 857 # Build target groups selected by options, plus any command line args
 858 set -- ${SELECTED} "$@"
 859 # run PowerPC by default
 860 [ $# = 0 ] && set -- powerpc
 861 build_targets "$@"
 862 wait