MAKEALL

   1 #!/bin/bash
   2 # Tool mainly for U-Boot Quality Assurance: build one or more board
   3 # configurations with minimal verbosity, showing only warnings and
   4 # errors.
   5 #
   6 # SPDX-License-Identifier:      GPL-2.0+
   7
   8 usage()
   9 {
  10         # if exiting with 0, write to stdout, else write to stderr
  11         local ret=${1:-0}
  12         [ "${ret}" -eq 1 ] && exec 1>&2
  13         cat <<-EOF
  14         Usage: MAKEALL [options] [--] [boards-to-build]
  15
  16         Options:
  17           -a ARCH,   --arch ARCH       Build all boards with arch ARCH
  18           -c CPU,    --cpu CPU         Build all boards with cpu CPU
  19           -v VENDOR, --vendor VENDOR   Build all boards with vendor VENDOR
  20           -s SOC,    --soc SOC         Build all boards with soc SOC
  21           -b BOARD,  --board BOARD     Build all boards with board name BOARD
  22           -l,        --list            List all targets to be built
  23           -m,        --maintainers     List all targets and maintainer email
  24           -M,        --mails           List all targets and all affilated emails
  25           -C,        --check           Enable build checking
  26           -n,        --continue        Continue (skip boards already built)
  27           -r,        --rebuild-errors  Rebuild any boards that errored
  28           -h,        --help            This help output
  29
  30         Selections by these options are logically ANDed; if the same option
  31         is used repeatedly, such selections are ORed.  So "-v FOO -v BAR"
  32         will select all configurations where the vendor is either FOO or
  33         BAR.  Any additional arguments specified on the command line are
  34         always build additionally.  See the boards.cfg file for more info.
  35
  36         If no boards are specified, then the default is "powerpc".
  37
  38         Environment variables:
  39           BUILD_NCPUS      number of parallel make jobs (default: auto)
  40           CROSS_COMPILE    cross-compiler toolchain prefix (default: "")
  41           CROSS_COMPILE_<ARCH> cross-compiler toolchain prefix for
  42                            architecture "ARCH".  Substitute "ARCH" for any
  43                            supported architecture (default: "")
  44           MAKEALL_LOGDIR   output all logs to here (default: ./LOG/)
  45           BUILD_DIR        output build directory (default: ./)
  46           BUILD_NBUILDS    number of parallel targets (default: 1)
  47
  48         Examples:
  49           - build all Power Architecture boards:
  50               MAKEALL -a powerpc
  51               MAKEALL --arch powerpc
  52               MAKEALL powerpc
  53           - build all PowerPC boards manufactured by vendor "esd":
  54               MAKEALL -a powerpc -v esd
  55           - build all PowerPC boards manufactured either by "keymile" or "siemens":
  56               MAKEALL -a powerpc -v keymile -v siemens
  57           - build all Freescale boards with MPC83xx CPUs, plus all 4xx boards:
  58               MAKEALL -c mpc83xx -v freescale 4xx
  59         EOF
  60         exit ${ret}
  61 }
  62
  63 SHORT_OPTS="ha:c:v:s:b:lmMCnr"
  64 LONG_OPTS="help,arch:,cpu:,vendor:,soc:,board:,list,maintainers,mails,check,continue,rebuild-errors"
  65
  66 # Option processing based on util-linux-2.13/getopt-parse.bash
  67
  68 # Note that we use `"$@"' to let each command-line parameter expand to a
  69 # separate word. The quotes around `$@' are essential!
  70 # We need TEMP as the `eval set --' would nuke the return value of
  71 # getopt.
  72 TEMP=`getopt -o ${SHORT_OPTS} --long ${LONG_OPTS} \
  73      -n 'MAKEALL' -- "$@"`
  74
  75 [ $? != 0 ] && usage 1
  76
  77 # Note the quotes around `$TEMP': they are essential!
  78 eval set -- "$TEMP"
  79
  80 SELECTED=''
  81 ONLY_LIST=''
  82 PRINT_MAINTS=''
  83 MAINTAINERS_ONLY=''
  84 CONTINUE=''
  85 REBUILD_ERRORS=''
  86
  87 while true ; do
  88         case "$1" in
  89         -a|--arch)
  90                 # echo "Option ARCH: argument \`$2'"
  91                 if [ "$opt_a" ] ; then
  92                         opt_a="${opt_a%)} || \$2 == \"$2\")"
  93                 else
  94                         opt_a="(\$2 == \"$2\")"
  95                 fi
  96                 SELECTED='y'
  97                 shift 2 ;;
  98         -c|--cpu)
  99                 # echo "Option CPU: argument \`$2'"
 100                 if [ "$opt_c" ] ; then
 101                         opt_c="${opt_c%)} || \$3 == \"$2\" || \$3 ~ /$2:/)"
 102                 else
 103                         opt_c="(\$3 == \"$2\" || \$3 ~ /$2:/)"
 104                 fi
 105                 SELECTED='y'
 106                 shift 2 ;;
 107         -s|--soc)
 108                 # echo "Option SoC: argument \`$2'"
 109                 if [ "$opt_s" ] ; then
 110                         opt_s="${opt_s%)} || \$4 == \"$2\" || \$4 ~ /$2/)"
 111                 else
 112                         opt_s="(\$4 == \"$2\" || \$4 ~ /$2/)"
 113                 fi
 114                 SELECTED='y'
 115                 shift 2 ;;
 116         -v|--vendor)
 117                 # echo "Option VENDOR: argument \`$2'"
 118                 if [ "$opt_v" ] ; then
 119                         opt_v="${opt_v%)} || \$5 == \"$2\")"
 120                 else
 121                         opt_v="(\$5 == \"$2\")"
 122                 fi
 123                 SELECTED='y'
 124                 shift 2 ;;
 125         -b|--board)
 126                 # echo "Option BOARD: argument \`$2'"
 127                 if [ "$opt_b" ] ; then
 128                         opt_b="${opt_b%)} || \$6 == \"$2\" || \$7 == \"$2\")"
 129                 else
 130                         # We need to check the 7th field too
 131                         # for boards whose 6th field is "-"
 132                         opt_b="(\$6 == \"$2\" || \$7 == \"$2\")"
 133                 fi
 134                 SELECTED='y'
 135                 shift 2 ;;
 136         -C|--check)
 137                 CHECK='C=1'
 138                 shift ;;
 139         -n|--continue)
 140                 CONTINUE='y'
 141                 shift ;;
 142         -r|--rebuild-errors)
 143                 REBUILD_ERRORS='y'
 144                 shift ;;
 145         -l|--list)
 146                 ONLY_LIST='y'
 147                 shift ;;
 148         -m|--maintainers)
 149                 ONLY_LIST='y'
 150                 PRINT_MAINTS='y'
 151                 MAINTAINERS_ONLY='y'
 152                 shift ;;
 153         -M|--mails)
 154                 ONLY_LIST='y'
 155                 PRINT_MAINTS='y'
 156                 shift ;;
 157         -h|--help)
 158                 usage ;;
 159         --)
 160                 shift ; break ;;
 161         *)
 162                 echo "Internal error!" >&2 ; exit 1 ;;
 163         esac
 164 done
 165
 166 GNU_MAKE=$(scripts/show-gnu-make) || {
 167         echo "GNU Make not found" >&2
 168         exit 1
 169 }
 170
 171 # echo "Remaining arguments:"
 172 # for arg do echo '--> '"\`$arg'" ; done
 173
 174 tools/genboardscfg.py || {
 175         echo "Failed to generate boards.cfg" >&2
 176         exit 1
 177 }
 178
 179 FILTER="\$1 !~ /^#/"
 180 [ "$opt_a" ] && FILTER="${FILTER} && $opt_a"
 181 [ "$opt_c" ] && FILTER="${FILTER} && $opt_c"
 182 [ "$opt_s" ] && FILTER="${FILTER} && $opt_s"
 183 [ "$opt_v" ] && FILTER="${FILTER} && $opt_v"
 184 [ "$opt_b" ] && FILTER="${FILTER} && $opt_b"
 185
 186 if [ "$SELECTED" ] ; then
 187         SELECTED=$(awk '('"$FILTER"') { print $7 }' boards.cfg)
 188
 189         # Make sure some boards from boards.cfg are actually found
 190         if [ -z "$SELECTED" ] ; then
 191                 echo "Error: No boards selected, invalid arguments"
 192                 exit 1
 193         fi
 194 fi
 195
 196 #########################################################################
 197
 198 # Print statistics when we exit
 199 trap exit 1 2 3 15
 200 trap print_stats 0
 201
 202 # Determine number of CPU cores if no default was set
 203 : ${BUILD_NCPUS:="`getconf _NPROCESSORS_ONLN`"}
 204
 205 if [ "$BUILD_NCPUS" -gt 1 ]
 206 then
 207         JOBS="-j $((BUILD_NCPUS + 1))"
 208 else
 209         JOBS=""
 210 fi
 211
 212 if [ "${MAKEALL_LOGDIR}" ] ; then
 213         LOG_DIR=${MAKEALL_LOGDIR}
 214 else
 215         LOG_DIR="LOG"
 216 fi
 217
 218 : ${BUILD_NBUILDS:=1}
 219 BUILD_MANY=0
 220
 221 if [ "${BUILD_NBUILDS}" -gt 1 ] ; then
 222         BUILD_MANY=1
 223         : ${BUILD_DIR:=./build}
 224         mkdir -p "${BUILD_DIR}/ERR"
 225         find "${BUILD_DIR}/ERR/" -type f -exec rm -f {} +
 226 fi
 227
 228 : ${BUILD_DIR:=.}
 229
 230 OUTPUT_PREFIX="${BUILD_DIR}"
 231
 232 [ -d ${LOG_DIR} ] || mkdir "${LOG_DIR}" || exit 1
 233 if [ "$CONTINUE" != 'y' -a "$REBUILD_ERRORS" != 'y' ] ; then
 234         find "${LOG_DIR}/" -type f -exec rm -f {} +
 235 fi
 236
 237 LIST=""
 238
 239 # Keep track of the number of builds and errors
 240 ERR_CNT=0
 241 ERR_LIST=""
 242 WRN_CNT=0
 243 WRN_LIST=""
 244 TOTAL_CNT=0
 245 SKIP_CNT=0
 246 CURRENT_CNT=0
 247 OLDEST_IDX=1
 248 RC=0
 249
 250 # Helper funcs for parsing boards.cfg
 251 targets_by_field()
 252 {
 253         field=$1
 254         regexp=$2
 255
 256         awk '($1 !~ /^#/ && $'"$field"' ~ /^'"$regexp"'$/) { print $7 }' \
 257                                                                 boards.cfg
 258 }
 259
 260 targets_by_arch() { targets_by_field 2 "$@" ; }
 261 targets_by_cpu()  { targets_by_field 3 "$@" ; targets_by_field 3 "$@:.*" ; }
 262 targets_by_soc()  { targets_by_field 4 "$@" ; }
 263
 264 #########################################################################
 265 ## MPC5xx Systems
 266 #########################################################################
 267
 268 LIST_5xx="$(targets_by_cpu mpc5xx)"
 269
 270 #########################################################################
 271 ## MPC5xxx Systems
 272 #########################################################################
 273
 274 LIST_5xxx="$(targets_by_cpu mpc5xxx)"
 275
 276 #########################################################################
 277 ## MPC512x Systems
 278 #########################################################################
 279
 280 LIST_512x="$(targets_by_cpu mpc512x)"
 281
 282 #########################################################################
 283 ## MPC8xx Systems
 284 #########################################################################
 285
 286 LIST_8xx="$(targets_by_cpu mpc8xx)"
 287
 288 #########################################################################
 289 ## PPC4xx Systems
 290 #########################################################################
 291
 292 LIST_4xx="$(targets_by_cpu ppc4xx)"
 293
 294 #########################################################################
 295 ## MPC8260 Systems (includes 8250, 8255 etc.)
 296 #########################################################################
 297
 298 LIST_8260="$(targets_by_cpu mpc8260)"
 299
 300 #########################################################################
 301 ## MPC83xx Systems (includes 8349, etc.)
 302 #########################################################################
 303
 304 LIST_83xx="$(targets_by_cpu mpc83xx)"
 305
 306 #########################################################################
 307 ## MPC85xx Systems (includes 8540, 8560 etc.)
 308 #########################################################################
 309
 310 LIST_85xx="$(targets_by_cpu mpc85xx)"
 311
 312 #########################################################################
 313 ## MPC86xx Systems
 314 #########################################################################
 315
 316 LIST_86xx="$(targets_by_cpu mpc86xx)"
 317
 318 #########################################################################
 319 ## PowerPC groups
 320 #########################################################################
 321
 322 LIST_TSEC="             \
 323         ${LIST_83xx}    \
 324         ${LIST_85xx}    \
 325         ${LIST_86xx}    \
 326 "
 327
 328 LIST_powerpc="          \
 329         ${LIST_5xx}     \
 330         ${LIST_512x}    \
 331         ${LIST_5xxx}    \
 332         ${LIST_8xx}     \
 333         ${LIST_824x}    \
 334         ${LIST_8260}    \
 335         ${LIST_83xx}    \
 336         ${LIST_85xx}    \
 337         ${LIST_86xx}    \
 338         ${LIST_4xx}     \
 339 "
 340
 341 # Alias "ppc" -> "powerpc" to not break compatibility with older scripts
 342 # still using "ppc" instead of "powerpc"
 343 LIST_ppc="              \
 344         ${LIST_powerpc} \
 345 "
 346
 347 #########################################################################
 348 ## StrongARM Systems
 349 #########################################################################
 350
 351 LIST_SA="$(targets_by_cpu sa1100)"
 352
 353 #########################################################################
 354 ## ARM7 Systems
 355 #########################################################################
 356
 357 LIST_ARM7="$(targets_by_cpu arm720t)"
 358
 359 #########################################################################
 360 ## ARM9 Systems
 361 #########################################################################
 362
 363 LIST_ARM9="$(targets_by_cpu arm920t)    \
 364         $(targets_by_cpu arm926ejs)     \
 365         $(targets_by_cpu arm946es)      \
 366 "
 367
 368 #########################################################################
 369 ## ARM11 Systems
 370 #########################################################################
 371 LIST_ARM11="$(targets_by_cpu arm1136)   \
 372         $(targets_by_cpu arm1176)       \
 373 "
 374
 375 #########################################################################
 376 ## ARMV7 Systems
 377 #########################################################################
 378
 379 LIST_ARMV7="$(targets_by_cpu armv7)"
 380
 381 #########################################################################
 382 ## ARMV8 Systems
 383 #########################################################################
 384
 385 LIST_ARMV8="$(targets_by_cpu armv8)"
 386
 387 #########################################################################
 388 ## AT91 Systems
 389 #########################################################################
 390
 391 LIST_at91="$(targets_by_soc at91)"
 392
 393 #########################################################################
 394 ## Xscale Systems
 395 #########################################################################
 396
 397 LIST_pxa="$(targets_by_cpu pxa)"
 398
 399 #########################################################################
 400 ## SPEAr Systems
 401 #########################################################################
 402
 403 LIST_spear="$(targets_by_soc spear)"
 404
 405 #########################################################################
 406 ## ARM groups
 407 #########################################################################
 408
 409 LIST_arm="$(targets_by_arch arm |               \
 410         for ARMV8_TARGET in $LIST_ARMV8;        \
 411                 do sed "/$ARMV8_TARGET/d";      \
 412         done)                                   \
 413 "
 414
 415 #########################################################################
 416 ## MIPS Systems         (default = big endian)
 417 #########################################################################
 418
 419 LIST_mips="$(targets_by_arch mips)"
 420
 421 #########################################################################
 422 ## OpenRISC Systems
 423 #########################################################################
 424
 425 LIST_openrisc="$(targets_by_arch openrisc)"
 426
 427 #########################################################################
 428 ## x86 Systems
 429 #########################################################################
 430
 431 LIST_x86="$(targets_by_arch x86)"
 432
 433 #########################################################################
 434 ## Nios-II Systems
 435 #########################################################################
 436
 437 LIST_nios2="$(targets_by_arch nios2)"
 438
 439 #########################################################################
 440 ## MicroBlaze Systems
 441 #########################################################################
 442
 443 LIST_microblaze="$(targets_by_arch microblaze)"
 444
 445 #########################################################################
 446 ## ColdFire Systems
 447 #########################################################################
 448
 449 LIST_m68k="$(targets_by_arch m68k)"
 450 LIST_coldfire=${LIST_m68k}
 451
 452 #########################################################################
 453 ## AVR32 Systems
 454 #########################################################################
 455
 456 LIST_avr32="$(targets_by_arch avr32)"
 457
 458 #########################################################################
 459 ## Blackfin Systems
 460 #########################################################################
 461
 462 LIST_blackfin="$(targets_by_arch blackfin)"
 463
 464 #########################################################################
 465 ## SH Systems
 466 #########################################################################
 467
 468 LIST_sh2="$(targets_by_cpu sh2)"
 469 LIST_sh3="$(targets_by_cpu sh3)"
 470 LIST_sh4="$(targets_by_cpu sh4)"
 471
 472 LIST_sh="$(targets_by_arch sh)"
 473
 474 #########################################################################
 475 ## SPARC Systems
 476 #########################################################################
 477
 478 LIST_sparc="$(targets_by_arch sparc)"
 479
 480 #########################################################################
 481 ## NDS32 Systems
 482 #########################################################################
 483
 484 LIST_nds32="$(targets_by_arch nds32)"
 485
 486 #########################################################################
 487 ## ARC Systems
 488 #########################################################################
 489
 490 LIST_arc="$(targets_by_arch arc)"
 491
 492 #-----------------------------------------------------------------------
 493
 494 get_target_location() {
 495         local target=$1
 496         local BOARD_NAME=""
 497         local CONFIG_NAME=""
 498         local board=""
 499         local vendor=""
 500
 501         # Automatic mode
 502         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 503         if [ -z "${line}" ] ; then echo "" ; return ; fi
 504
 505         set ${line}
 506
 507         CONFIG_NAME="${7%_defconfig}"
 508
 509         [ "${BOARD_NAME}" ] || BOARD_NAME="${7%_defconfig}"
 510
 511         if [ $# -gt 5 ]; then
 512                 if [ "$6" = "-" ] ; then
 513                         board=${BOARD_NAME}
 514                 else
 515                         board="$6"
 516                 fi
 517         fi
 518
 519         [ $# -gt 4 ] && [ "$5" != "-" ] && vendor="$5"
 520         [ $# -gt 6 ] && [ "$8" != "-" ] && {
 521                 tmp="${8%:*}"
 522                 if [ "$tmp" ] ; then
 523                         CONFIG_NAME="$tmp"
 524                 fi
 525         }
 526
 527         # Assign board directory to BOARDIR variable
 528         if [ "${vendor}" == "-" ] ; then
 529             BOARDDIR=${board}
 530         else
 531             BOARDDIR=${vendor}/${board}
 532         fi
 533
 534         echo "${CONFIG_NAME}:${BOARDDIR}:${BOARD_NAME}"
 535 }
 536
 537 get_target_maintainers() {
 538         local name=`echo $1 | cut -d : -f 3`
 539
 540         local line=`awk '\$7 == "'"$target"'" { print \$0 }' boards.cfg`
 541         if [ -z "${line}" ]; then
 542                 echo ""
 543                 return ;
 544         fi
 545
 546         local mails=`echo ${line} | cut -d ' ' -f 9- | sed -e 's/[^<]*<//' -e 's/>.*</ /' -e 's/>[^>]*$//'`
 547         [ "$mails" == "-" ] && mails=""
 548         echo "$mails"
 549 }
 550
 551 get_target_arch() {
 552         local target=$1
 553
 554         awk '$7 == "'$target'" { print $2 }' boards.cfg
 555 }
 556
 557 list_target() {
 558         if [ "$PRINT_MAINTS" != 'y' ] ; then
 559                 echo "$1"
 560                 return
 561         fi
 562
 563         echo -n "$1:"
 564
 565         local loc=`get_target_location $1`
 566
 567         if [ -z "${loc}" ] ; then echo "ERROR" ; return ; fi
 568
 569         local maintainers_result=`get_target_maintainers ${loc} | tr " " "\n"`
 570
 571         if [ "$MAINTAINERS_ONLY" != 'y' ] ; then
 572
 573                 local dir=`echo ${loc} | cut -d ":" -f 2`
 574                 local cfg=`echo ${loc} | cut -d ":" -f 1`
 575                 local git_result=`git log --format=%aE board/${dir} \
 576                                 include/configs/${cfg}.h | grep "@"`
 577                 local git_result_recent=`echo ${git_result} | tr " " "\n" | \
 578                                                 head -n 3`
 579                 local git_result_top=`echo ${git_result} | tr " " "\n" | \
 580                         sort | uniq -c | sort -nr | head -n 3 | \
 581                         sed "s/^ \+[0-9]\+ \+//"`
 582
 583                 echo -e "$git_result_recent\n$git_result_top\n$maintainers_result" | \
 584                         sort -u | tr "\n" " " | sed "s/ $//" ;
 585         else
 586                 echo -e "$maintainers_result" | sort -u | tr "\n" " " | \
 587                                                 sed "s/ $//" ;
 588         fi
 589
 590         echo ""
 591 }
 592
 593 # Each finished build will have a file called ${donep}${n},
 594 # where n is the index of the build. Each build
 595 # we've already noted as finished will have ${skipp}${n}.
 596 # The code managing the build process will use this information
 597 # to ensure that only BUILD_NBUILDS builds are in flight at once
 598 donep="${LOG_DIR}/._done_"
 599 skipp="${LOG_DIR}/._skip_"
 600
 601 build_target_killed() {
 602         echo "Aborted $target build."
 603         # Remove the logs for this board since it was aborted
 604         rm -f ${LOG_DIR}/$target.MAKELOG ${LOG_DIR}/$target.ERR
 605         exit
 606 }
 607
 608 build_target() {
 609         target=$1
 610         build_idx=$2
 611
 612         if [ "$ONLY_LIST" == 'y' ] ; then
 613                 list_target ${target}
 614                 return
 615         fi
 616
 617         if [ $BUILD_MANY == 1 ] ; then
 618                 output_dir="${OUTPUT_PREFIX}/${target}"
 619                 mkdir -p "${output_dir}"
 620                 trap build_target_killed TERM
 621         else
 622                 output_dir="${OUTPUT_PREFIX}"
 623         fi
 624
 625         target_arch=$(get_target_arch ${target})
 626         eval cross_toolchain=\$CROSS_COMPILE_`echo $target_arch | tr '[:lower:]' '[:upper:]'`
 627         if [ "${cross_toolchain}" ] ; then
 628             MAKE="$GNU_MAKE CROSS_COMPILE=${cross_toolchain}"
 629         elif [ "${CROSS_COMPILE}" ] ; then
 630             MAKE="$GNU_MAKE CROSS_COMPILE=${CROSS_COMPILE}"
 631         else
 632             MAKE=$GNU_MAKE
 633         fi
 634
 635         if [  "${output_dir}" != "." ] ; then
 636                 MAKE="${MAKE} O=${output_dir}"
 637         fi
 638
 639         ${MAKE} mrproper >/dev/null
 640
 641         echo "Building ${target} board..."
 642         ${MAKE} -s ${target}_defconfig >/dev/null
 643
 644         ${MAKE} ${JOBS} ${CHECK} all \
 645                 >${LOG_DIR}/$target.MAKELOG 2> ${LOG_DIR}/$target.ERR
 646
 647         # Check for 'make' errors
 648         if [ ${PIPESTATUS[0]} -ne 0 ] ; then
 649                 RC=1
 650         fi
 651
 652         OBJS=${output_dir}/u-boot
 653         if [ -e ${output_dir}/spl/u-boot-spl ]; then
 654                 OBJS="${OBJS} ${output_dir}/spl/u-boot-spl"
 655         fi
 656
 657         ${CROSS_COMPILE}size ${OBJS} | tee -a ${LOG_DIR}/$target.MAKELOG
 658
 659         if [ $BUILD_MANY == 1 ] ; then
 660                 trap - TERM
 661
 662                 ${MAKE} -s clean
 663
 664                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 665                         cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
 666                 else
 667                         rm ${LOG_DIR}/${target}.ERR
 668                 fi
 669         else
 670                 if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 671                         if grep -iw error ${LOG_DIR}/${target}.ERR ; then
 672                                 : $(( ERR_CNT += 1 ))
 673                                 ERR_LIST="${ERR_LIST} $target"
 674                         else
 675                                 : $(( WRN_CNT += 1 ))
 676                                 WRN_LIST="${WRN_LIST} $target"
 677                         fi
 678                 else
 679                         rm ${LOG_DIR}/${target}.ERR
 680                 fi
 681         fi
 682
 683         [ -e "${LOG_DIR}/${target}.ERR" ] && cat "${LOG_DIR}/${target}.ERR"
 684
 685         touch "${donep}${build_idx}"
 686 }
 687
 688 manage_builds() {
 689         search_idx=${OLDEST_IDX}
 690         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 691
 692         while true; do
 693                 if [ -e "${donep}${search_idx}" ] ; then
 694                         : $(( CURRENT_CNT-- ))
 695                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 696                                 : $(( OLDEST_IDX++ ))
 697
 698                         # Only want to count it once
 699                         rm -f "${donep}${search_idx}"
 700                         touch "${skipp}${search_idx}"
 701                 elif [ -e "${skipp}${search_idx}" ] ; then
 702                         [ ${OLDEST_IDX} -eq ${search_idx} ] &&
 703                                 : $(( OLDEST_IDX++ ))
 704                 fi
 705                 : $(( search_idx++ ))
 706                 if [ ${search_idx} -gt ${TOTAL_CNT} ] ; then
 707                         if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 708                                 search_idx=${OLDEST_IDX}
 709                                 sleep 1
 710                         else
 711                                 break
 712                         fi
 713                 fi
 714         done
 715 }
 716
 717 build_targets() {
 718         for t in "$@" ; do
 719                 # If a LIST_xxx var exists, use it.  But avoid variable
 720                 # expansion in the eval when a board name contains certain
 721                 # characters that the shell interprets.
 722                 case ${t} in
 723                         *[-+=]*) list= ;;
 724                         *)       list=$(eval echo '${LIST_'$t'}') ;;
 725                 esac
 726                 if [ -n "${list}" ] ; then
 727                         build_targets ${list}
 728                 else
 729                         : $((TOTAL_CNT += 1))
 730                         : $((CURRENT_CNT += 1))
 731                         rm -f "${donep}${TOTAL_CNT}"
 732                         rm -f "${skipp}${TOTAL_CNT}"
 733                         if [ "$CONTINUE" = 'y' -a -e ${LOG_DIR}/$t.MAKELOG ] ; then
 734                                 : $((SKIP_CNT += 1))
 735                                 touch "${donep}${TOTAL_CNT}"
 736                         elif [ "$REBUILD_ERRORS" = 'y' -a ! -e ${LOG_DIR}/$t.ERR ] ; then
 737                                 : $((SKIP_CNT += 1))
 738                                 touch "${donep}${TOTAL_CNT}"
 739                         else
 740                                 if [ $BUILD_MANY == 1 ] ; then
 741                                         build_target ${t} ${TOTAL_CNT} &
 742                                 else
 743                                         CUR_TGT="${t}"
 744                                         build_target ${t} ${TOTAL_CNT}
 745                                         CUR_TGT=''
 746                                 fi
 747                         fi
 748                 fi
 749
 750                 # We maintain a running count of all the builds we have done.
 751                 # Each finished build will have a file called ${donep}${n},
 752                 # where n is the index of the build. Each build
 753                 # we've already noted as finished will have ${skipp}${n}.
 754                 # We track the current index via TOTAL_CNT, and the oldest
 755                 # index. When we exceed the maximum number of parallel builds,
 756                 # We look from oldest to current for builds that have completed,
 757                 # and update the current count and oldest index as appropriate.
 758                 # If we've gone through the entire list, wait a second, and
 759                 # reprocess the entire list until we find a build that has
 760                 # completed
 761                 if [ ${CURRENT_CNT} -ge ${BUILD_NBUILDS} ] ; then
 762                         manage_builds
 763                 fi
 764         done
 765 }
 766
 767 #-----------------------------------------------------------------------
 768
 769 kill_children() {
 770         local OS=$(uname -s)
 771         local children=""
 772         case "${OS}" in
 773                 "Darwin")
 774                         # Mac OS X is known to have BSD style ps
 775                         local pgid=$(ps -p $$ -o pgid | sed -e "/PGID/d")
 776                         children=$(ps -g $pgid -o pid | sed -e "/PID\|$$\|$pgid/d")
 777                         ;;
 778                 *)
 779                         # everything else tries the GNU style
 780                         local pgid=$(ps -p $$ --no-headers -o "%r" | tr -d ' ')
 781                         children=$(pgrep -g $pgid | sed -e "/$$\|$pgid/d")
 782                         ;;
 783         esac
 784
 785         kill $children 2> /dev/null
 786         wait $children 2> /dev/null
 787
 788         exit
 789 }
 790
 791 print_stats() {
 792         if [ "$ONLY_LIST" == 'y' ] ; then return ; fi
 793
 794         # Only count boards that completed
 795         : $((TOTAL_CNT = `find ${skipp}* 2> /dev/null | wc -l`))
 796
 797         rm -f ${donep}* ${skipp}*
 798
 799         if [ $BUILD_MANY == 1 ] && [ -e "${OUTPUT_PREFIX}/ERR" ] ; then
 800                 ERR_LIST=`grep -riwl error ${OUTPUT_PREFIX}/ERR/`
 801                 ERR_LIST=`for f in $ERR_LIST ; do echo -n " $(basename $f)" ; done`
 802                 ERR_CNT=`echo $ERR_LIST | wc -w | awk '{print $1}'`
 803                 WRN_LIST=`grep -riwL error ${OUTPUT_PREFIX}/ERR/`
 804                 WRN_LIST=`for f in $WRN_LIST ; do echo -n " $(basename $f)" ; done`
 805                 WRN_CNT=`echo $WRN_LIST | wc -w | awk '{print $1}'`
 806         else
 807                 # Remove the logs for any board that was interrupted
 808                 rm -f ${LOG_DIR}/${CUR_TGT}.MAKELOG ${LOG_DIR}/${CUR_TGT}.ERR
 809         fi
 810
 811         : $((TOTAL_CNT -= ${SKIP_CNT}))
 812         echo ""
 813         echo "--------------------- SUMMARY ----------------------------"
 814         if [ "$CONTINUE" = 'y' -o "$REBUILD_ERRORS" = 'y' ] ; then
 815                 echo "Boards skipped: ${SKIP_CNT}"
 816         fi
 817         echo "Boards compiled: ${TOTAL_CNT}"
 818         if [ ${ERR_CNT} -gt 0 ] ; then
 819                 echo "Boards with errors: ${ERR_CNT} (${ERR_LIST} )"
 820         fi
 821         if [ ${WRN_CNT} -gt 0 ] ; then
 822                 echo "Boards with warnings but no errors: ${WRN_CNT} (${WRN_LIST} )"
 823         fi
 824         echo "----------------------------------------------------------"
 825
 826         if [ $BUILD_MANY == 1 ] ; then
 827                 kill_children
 828         fi
 829
 830         exit $RC
 831 }
 832
 833 #-----------------------------------------------------------------------
 834
 835 # Build target groups selected by options, plus any command line args
 836 set -- ${SELECTED} "$@"
 837 # run PowerPC by default
 838 [ $# = 0 ] && set -- powerpc
 839 build_targets "$@"
 840 wait