4 The following is a consolidated list of the kernel parameters as
5 implemented by the __setup(), core_param() and module_param() macros
6 and sorted into English Dictionary order (defined as ignoring all
7 punctuation and sorting digits before letters in a case insensitive
8 manner), and with descriptions where known.
10 The kernel parses parameters from the kernel command line up to "--";
11 if it doesn't recognize a parameter and it doesn't contain a '.', the
12 parameter gets passed to init: parameters with '=' go into init's
13 environment, others are passed as command line arguments to init.
14 Everything after "--" is passed as an argument to init.
16 Module parameters can be specified in two ways: via the kernel command
17 line with a module name prefix, or via modprobe, e.g.:
19 (kernel command line) usbcore.blinkenlights=1
20 (modprobe command line) modprobe usbcore blinkenlights=1
22 Parameters for modules which are built into the kernel need to be
23 specified on the kernel command line. modprobe looks through the
24 kernel command line (/proc/cmdline) and collects module parameters
25 when it loads a module, so the kernel command line can be used for
28 Hyphens (dashes) and underscores are equivalent in parameter names, so
29 log_buf_len=1M print-fatal-signals=1
30 can also be entered as
31 log-buf-len=1M print_fatal_signals=1
33 Double-quotes can be used to protect spaces in values, e.g.:
34 param="spaces in here"
36 This document may not be entirely up to date and comprehensive. The command
37 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
38 module. Loadable modules, after being loaded into the running kernel, also
39 reveal their parameters in /sys/module/${modulename}/parameters/. Some of these
40 parameters may be changed at runtime by the command
41 "echo -n ${value} > /sys/module/${modulename}/parameters/${parm}".
43 The parameters listed below are only valid if certain kernel build options were
44 enabled and if respective hardware is present. The text in square brackets at
45 the beginning of each description states the restrictions within which a
46 parameter is applicable:
48 ACPI ACPI support is enabled.
49 AGP AGP (Accelerated Graphics Port) is enabled.
50 ALSA ALSA sound support is enabled.
51 APIC APIC support is enabled.
52 APM Advanced Power Management support is enabled.
53 ARM ARM architecture is enabled.
54 AVR32 AVR32 architecture is enabled.
55 AX25 Appropriate AX.25 support is enabled.
56 BLACKFIN Blackfin architecture is enabled.
57 CLK Common clock infrastructure is enabled.
58 CMA Contiguous Memory Area support is enabled.
59 DRM Direct Rendering Management support is enabled.
60 DYNAMIC_DEBUG Build in debug messages and enable them at runtime
61 EDD BIOS Enhanced Disk Drive Services (EDD) is enabled
62 EFI EFI Partitioning (GPT) is enabled
63 EIDE EIDE/ATAPI support is enabled.
64 EVM Extended Verification Module
65 FB The frame buffer device is enabled.
66 FTRACE Function tracing enabled.
67 GCOV GCOV profiling is enabled.
68 HW Appropriate hardware is enabled.
69 IA-64 IA-64 architecture is enabled.
70 IMA Integrity measurement architecture is enabled.
71 IOSCHED More than one I/O scheduler is enabled.
72 IP_PNP IP DHCP, BOOTP, or RARP is enabled.
73 IPV6 IPv6 support is enabled.
74 ISAPNP ISA PnP code is enabled.
75 ISDN Appropriate ISDN support is enabled.
76 JOY Appropriate joystick support is enabled.
77 KGDB Kernel debugger support is enabled.
78 KVM Kernel Virtual Machine support is enabled.
79 LIBATA Libata driver is enabled
80 LP Printer support is enabled.
81 LOOP Loopback device support is enabled.
82 M68k M68k architecture is enabled.
83 These options have more detailed description inside of
84 Documentation/m68k/kernel-options.txt.
85 MDA MDA console support is enabled.
86 MIPS MIPS architecture is enabled.
87 MOUSE Appropriate mouse support is enabled.
88 MSI Message Signaled Interrupts (PCI).
89 MTD MTD (Memory Technology Device) support is enabled.
90 NET Appropriate network support is enabled.
91 NUMA NUMA support is enabled.
92 NFS Appropriate NFS support is enabled.
93 OSS OSS sound support is enabled.
94 PV_OPS A paravirtualized kernel is enabled.
95 PARIDE The ParIDE (parallel port IDE) subsystem is enabled.
96 PARISC The PA-RISC architecture is enabled.
97 PCI PCI bus support is enabled.
98 PCIE PCI Express support is enabled.
99 PCMCIA The PCMCIA subsystem is enabled.
100 PNP Plug & Play support is enabled.
101 PPC PowerPC architecture is enabled.
102 PPT Parallel port support is enabled.
103 PS2 Appropriate PS/2 support is enabled.
104 RAM RAM disk support is enabled.
105 S390 S390 architecture is enabled.
106 SCSI Appropriate SCSI support is enabled.
107 A lot of drivers have their options described inside
108 the Documentation/scsi/ sub-directory.
109 SECURITY Different security models are enabled.
110 SELINUX SELinux support is enabled.
111 APPARMOR AppArmor support is enabled.
112 SERIAL Serial support is enabled.
113 SH SuperH architecture is enabled.
114 SMP The kernel is an SMP kernel.
115 SPARC Sparc architecture is enabled.
116 SWSUSP Software suspend (hibernation) is enabled.
117 SUSPEND System suspend states are enabled.
118 TPM TPM drivers are enabled.
119 TS Appropriate touchscreen support is enabled.
120 UMS USB Mass Storage support is enabled.
121 USB USB support is enabled.
122 USBHID USB Human Interface Device support is enabled.
123 V4L Video For Linux support is enabled.
124 VMMIO Driver for memory mapped virtio devices is enabled.
125 VGA The VGA console has been enabled.
126 VT Virtual terminal support is enabled.
127 WDT Watchdog support is enabled.
128 XT IBM PC/XT MFM hard disk support is enabled.
129 X86-32 X86-32, aka i386 architecture is enabled.
130 X86-64 X86-64 architecture is enabled.
131 More X86-64 boot options can be found in
132 Documentation/x86/x86_64/boot-options.txt .
133 X86 Either 32-bit or 64-bit x86 (same as X86-32+X86-64)
134 X86_UV SGI UV support is enabled.
135 XEN Xen support is enabled
137 In addition, the following text indicates that the option:
139 BUGS= Relates to possible processor bugs on the said processor.
140 KNL Is a kernel start-up parameter.
141 BOOT Is a boot loader parameter.
143 Parameters denoted with BOOT are actually interpreted by the boot
144 loader, and have no meaning to the kernel directly.
145 Do not modify the syntax of boot loader parameters without extreme
146 need or coordination with <Documentation/x86/boot.txt>.
148 There are also arch-specific kernel-parameters not documented here.
149 See for example <Documentation/x86/x86_64/boot-options.txt>.
151 Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
152 a trailing = on the name of any parameter states that that parameter will
153 be entered as an environment variable, whereas its absence indicates that
154 it will appear as a kernel argument readable via /proc/cmdline by programs
155 running once the system is up.
157 The number of kernel parameters is not limited, but the length of the
158 complete command line (parameters including spaces etc.) is limited to
159 a fixed number of characters. This limit depends on the architecture
160 and is between 256 and 4096 characters. It is defined in the file
161 ./include/asm/setup.h as COMMAND_LINE_SIZE.
163 Finally, the [KMG] suffix is commonly described after a number of kernel
164 parameter values. These 'K', 'M', and 'G' letters represent the _binary_
165 multipliers 'Kilo', 'Mega', and 'Giga', equalling 2^10, 2^20, and 2^30
166 bytes respectively. Such letter suffixes can also be entirely omitted.
169 acpi= [HW,ACPI,X86,ARM64]
170 Advanced Configuration and Power Interface
171 Format: { force | on | off | strict | noirq | rsdt |
173 force -- enable ACPI if default was off
174 on -- enable ACPI but allow fallback to DT [arm64]
175 off -- disable ACPI if default was on
176 noirq -- do not use ACPI for IRQ routing
177 strict -- Be less tolerant of platforms that are not
178 strictly ACPI specification compliant.
179 rsdt -- prefer RSDT over (default) XSDT
180 copy_dsdt -- copy DSDT to memory
181 For ARM64, ONLY "acpi=off", "acpi=on" or "acpi=force"
184 See also Documentation/power/runtime_pm.txt, pci=noacpi
186 acpi_apic_instance= [ACPI, IOAPIC]
188 2: use 2nd APIC table, if available
189 1,0: use 1st APIC table
192 acpi_backlight= [HW,ACPI]
193 acpi_backlight=vendor
195 If set to vendor, prefer vendor specific driver
196 (e.g. thinkpad_acpi, sony_acpi, etc.) instead
197 of the ACPI video.ko driver.
199 acpi_force_32bit_fadt_addr
200 force FADT to use 32 bit addresses rather than the
201 64 bit X_* addresses. Some firmware have broken 64
202 bit addresses for force ACPI ignore these and use
203 the older legacy 32 bit addresses.
205 acpica_no_return_repair [HW, ACPI]
206 Disable AML predefined validation mechanism
207 This mechanism can repair the evaluation result to make
208 the return objects more ACPI specification compliant.
209 This option is useful for developers to identify the
210 root cause of an AML interpreter issue when the issue
211 has something to do with the repair mechanism.
213 acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
214 acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
216 CONFIG_ACPI_DEBUG must be enabled to produce any ACPI
217 debug output. Bits in debug_layer correspond to a
218 _COMPONENT in an ACPI source file, e.g.,
219 #define _COMPONENT ACPI_PCI_COMPONENT
220 Bits in debug_level correspond to a level in
221 ACPI_DEBUG_PRINT statements, e.g.,
222 ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
223 The debug_level mask defaults to "info". See
224 Documentation/acpi/debug.txt for more information about
225 debug layers and levels.
227 Enable processor driver info messages:
228 acpi.debug_layer=0x20000000
229 Enable PCI/PCI interrupt routing info messages:
230 acpi.debug_layer=0x400000
231 Enable AML "Debug" output, i.e., stores to the Debug
232 object while interpreting AML:
233 acpi.debug_layer=0xffffffff acpi.debug_level=0x2
234 Enable all messages related to ACPI hardware:
235 acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
237 Some values produce so much output that the system is
238 unusable. The "log_buf_len" parameter may be useful
239 if you need to capture more output.
241 acpi_enforce_resources= [ACPI]
242 { strict | lax | no }
243 Check for resource conflicts between native drivers
244 and ACPI OperationRegions (SystemIO and SystemMemory
245 only). IO ports and memory declared in ACPI might be
246 used by the ACPI subsystem in arbitrary AML code and
247 can interfere with legacy drivers.
248 strict (default): access to resources claimed by ACPI
249 is denied; legacy drivers trying to access reserved
250 resources will fail to bind to device using them.
251 lax: access to resources claimed by ACPI is allowed;
252 legacy drivers trying to access reserved resources
253 will bind successfully but a warning message is logged.
254 no: ACPI OperationRegions are not marked as reserved,
255 no further checks are performed.
257 acpi_force_table_verification [HW,ACPI]
258 Enable table checksum verification during early stage.
259 By default, this is disabled due to x86 early mapping
262 acpi_irq_balance [HW,ACPI]
263 ACPI will balance active IRQs
266 acpi_irq_nobalance [HW,ACPI]
267 ACPI will not move active IRQs (default)
270 acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
271 Format: <irq>,<irq>...
273 acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for
275 Format: <irq>,<irq>...
277 acpi_no_auto_serialize [HW,ACPI]
278 Disable auto-serialization of AML methods
279 AML control methods that contain the opcodes to create
280 named objects will be marked as "Serialized" by the
281 auto-serialization feature.
282 This feature is enabled by default.
283 This option allows to turn off the feature.
285 acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump
288 acpi_no_static_ssdt [HW,ACPI]
289 Disable installation of static SSDTs at early boot time
290 By default, SSDTs contained in the RSDT/XSDT will be
291 installed automatically and they will appear under
292 /sys/firmware/acpi/tables.
293 This option turns off this feature.
294 Note that specifying this option does not affect
295 dynamic table installation which will install SSDT
296 tables to /sys/firmware/acpi/tables/dynamic.
298 acpi_rsdp= [ACPI,EFI,KEXEC]
299 Pass the RSDP address to the kernel, mostly used
300 on machines running EFI runtime service to boot the
301 second kernel for kdump.
303 acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
304 Format: To spoof as Windows 98: ="Microsoft Windows"
306 acpi_rev_override [ACPI] Override the _REV object to return 5 (instead
307 of 2 which is mandated by ACPI 6) as the supported ACPI
308 specification revision (when using this switch, it may
309 be necessary to carry out a cold reboot _twice_ in a
310 row to make it take effect on the platform firmware).
312 acpi_osi= [HW,ACPI] Modify list of supported OS interface strings
313 acpi_osi="string1" # add string1
314 acpi_osi="!string2" # remove string2
315 acpi_osi=!* # remove all strings
316 acpi_osi=! # disable all built-in OS vendor
318 acpi_osi=!! # enable all built-in OS vendor
320 acpi_osi= # disable all strings
322 'acpi_osi=!' can be used in combination with single or
323 multiple 'acpi_osi="string1"' to support specific OS
324 vendor string(s). Note that such command can only
325 affect the default state of the OS vendor strings, thus
326 it cannot affect the default state of the feature group
327 strings and the current state of the OS vendor strings,
328 specifying it multiple times through kernel command line
329 is meaningless. This command is useful when one do not
330 care about the state of the feature group strings which
331 should be controlled by the OSPM.
333 1. 'acpi_osi=! acpi_osi="Windows 2000"' is equivalent
334 to 'acpi_osi="Windows 2000" acpi_osi=!', they all
335 can make '_OSI("Windows 2000")' TRUE.
337 'acpi_osi=' cannot be used in combination with other
338 'acpi_osi=' command lines, the _OSI method will not
339 exist in the ACPI namespace. NOTE that such command can
340 only affect the _OSI support state, thus specifying it
341 multiple times through kernel command line is also
344 1. 'acpi_osi=' can make 'CondRefOf(_OSI, Local1)'
347 'acpi_osi=!*' can be used in combination with single or
348 multiple 'acpi_osi="string1"' to support specific
349 string(s). Note that such command can affect the
350 current state of both the OS vendor strings and the
351 feature group strings, thus specifying it multiple times
352 through kernel command line is meaningful. But it may
353 still not able to affect the final state of a string if
354 there are quirks related to this string. This command
355 is useful when one want to control the state of the
356 feature group strings to debug BIOS issues related to
359 1. 'acpi_osi="Module Device" acpi_osi=!*' can make
360 '_OSI("Module Device")' FALSE.
361 2. 'acpi_osi=!* acpi_osi="Module Device"' can make
362 '_OSI("Module Device")' TRUE.
363 3. 'acpi_osi=! acpi_osi=!* acpi_osi="Windows 2000"' is
365 'acpi_osi=!* acpi_osi=! acpi_osi="Windows 2000"'
367 'acpi_osi=!* acpi_osi="Windows 2000" acpi_osi=!',
368 they all will make '_OSI("Windows 2000")' TRUE.
371 Override the pmtimer bug detection: force the kernel
372 to assume that this machine's pmtimer latches its value
373 and always returns good values.
375 acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
376 Format: { level | edge | high | low }
378 acpi_skip_timer_override [HW,ACPI]
379 Recognize and ignore IRQ0/pin2 Interrupt Override.
380 For broken nForce2 BIOS resulting in XT-PIC timer.
382 acpi_sleep= [HW,ACPI] Sleep options
383 Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
384 old_ordering, nonvs, sci_force_enable }
385 See Documentation/power/video.txt for information on
387 s3_beep is for debugging; it makes the PC's speaker beep
388 as soon as the kernel's real-mode entry point is called.
389 s4_nohwsig prevents ACPI hardware signature from being
390 used during resume from hibernation.
391 old_ordering causes the ACPI 1.0 ordering of the _PTS
392 control method, with respect to putting devices into
393 low power states, to be enforced (the ACPI 2.0 ordering
394 of _PTS is used by default).
395 nonvs prevents the kernel from saving/restoring the
396 ACPI NVS memory during suspend/hibernation and resume.
397 sci_force_enable causes the kernel to set SCI_EN directly
398 on resume from S1/S3 (which is against the ACPI spec,
399 but some broken systems don't work without it).
401 acpi_use_timer_override [HW,ACPI]
402 Use timer override. For some broken Nvidia NF5 boards
403 that require a timer override, but don't have HPET
405 add_efi_memmap [EFI; X86] Include EFI memory map in
406 kernel's map of available physical RAM.
409 { off | try_unsupported }
410 off: disable AGP support
411 try_unsupported: try to drive unsupported chipsets
412 (may crash computer or cause data corruption)
415 See Documentation/sound/alsa/alsa-parameters.txt
418 Allow the default userspace alignment fault handler
419 behaviour to be specified. Bit 0 enables warnings,
420 bit 1 enables fixups, and bit 2 sends a segfault.
422 align_va_addr= [X86-64]
423 Align virtual addresses by clearing slice [14:12] when
424 allocating a VMA at process creation time. This option
425 gives you up to 3% performance improvement on AMD F15h
426 machines (where it is enabled by default) for a
427 CPU-intensive style benchmark, and it can vary highly in
428 a microbenchmark depending on workload and compiler.
430 32: only for 32-bit processes
431 64: only for 64-bit processes
432 on: enable for both 32- and 64-bit processes
433 off: disable for both 32- and 64-bit processes
435 alloc_snapshot [FTRACE]
436 Allocate the ftrace snapshot buffer on boot up when the
437 main buffer is allocated. This is handy if debugging
438 and you need to use tracing_snapshot() on boot up, and
439 do not want to use tracing_snapshot_alloc() as it needs
440 to be done where GFP_KERNEL allocations are allowed.
442 amd_iommu= [HW,X86-64]
443 Pass parameters to the AMD IOMMU driver in the system.
445 fullflush - enable flushing of IO/TLB entries when
446 they are unmapped. Otherwise they are
447 flushed before they will be reused, which
449 off - do not initialize any AMD IOMMU found in
451 force_isolation - Force device isolation for all
452 devices. The IOMMU driver is not
453 allowed anymore to lift isolation
454 requirements as needed. This option
455 does not override iommu=pt
457 amd_iommu_dump= [HW,X86-64]
458 Enable AMD IOMMU driver option to dump the ACPI table
459 for AMD IOMMU. With this option enabled, AMD IOMMU
460 driver will print ACPI tables for AMD IOMMU during
461 IOMMU initialization.
463 amijoy.map= [HW,JOY] Amiga joystick support
464 Map of devices attached to JOY0DAT and JOY1DAT
466 See also Documentation/input/joystick.txt
468 analog.map= [HW,JOY] Analog joystick and gamepad support
469 Specifies type or capabilities of an analog joystick
470 connected to one of 16 gameports
471 Format: <type1>,<type2>,..<type16>
474 Power management functions (SPARCstation-4/5 + deriv.)
476 Disable APC CPU standby support. SPARCstation-Fox does
477 not play well with APC CPU idle - disable it if you have
478 APC and your system crashes randomly.
480 apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
481 Change the output verbosity whilst booting
482 Format: { quiet (default) | verbose | debug }
483 Change the amount of debugging information output
484 when initialising the APIC and IO-APIC components.
486 apic_extnmi= [APIC,X86] External NMI delivery setting
487 Format: { bsp (default) | all | none }
488 bsp: External NMI is delivered only to CPU 0
489 all: External NMIs are broadcast to all CPUs as a
491 none: External NMI is masked for all CPUs. This is
492 useful so that a dump capture kernel won't be
496 See Documentation/networking/ipv6.txt.
498 show_lapic= [APIC,X86] Advanced Programmable Interrupt Controller
499 Limit apic dumping. The parameter defines the maximal
500 number of local apics being dumped. Also it is possible
501 to set it to "all" by meaning -- no limit here.
502 Format: { 1 (default) | 2 | ... | all }.
503 The parameter valid if only apic=debug or
504 apic=verbose is specified.
505 Example: apic=debug show_lapic=all
507 apm= [APM] Advanced Power Management
508 See header of arch/x86/kernel/apm_32.c.
510 arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards
511 Format: <io>,<irq>,<nodeID>
515 atarimouse= [HW,MOUSE] Atari Mouse
517 atkbd.extra= [HW] Enable extra LEDs and keys on IBM RapidAccess,
518 EzKey and similar keyboards
520 atkbd.reset= [HW] Reset keyboard during initialization
522 atkbd.set= [HW] Select keyboard code set
523 Format: <int> (2 = AT (default), 3 = PS/2)
525 atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar
528 atkbd.softraw= [HW] Choose between synthetic and real raw mode
529 Format: <bool> (0 = real, 1 = synthetic (default))
531 atkbd.softrepeat= [HW]
532 Use software keyboard repeat
534 audit= [KNL] Enable the audit sub-system
535 Format: { "0" | "1" } (0 = disabled, 1 = enabled)
536 0 - kernel audit is disabled and can not be enabled
537 until the next reboot
538 unset - kernel audit is initialized but disabled and
539 will be fully enabled by the userspace auditd.
540 1 - kernel audit is initialized and partially enabled,
541 storing at most audit_backlog_limit messages in
542 RAM until it is fully enabled by the userspace
546 audit_backlog_limit= [KNL] Set the audit queue size limit.
547 Format: <int> (must be >=0)
550 bau= [X86_UV] Enable the BAU on SGI UV. The default
551 behavior is to disable the BAU (i.e. bau=0).
552 Format: { "0" | "1" }
555 unset - Disable the BAU.
557 baycom_epp= [HW,AX25]
560 baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem
562 See header of drivers/net/hamradio/baycom_par.c.
564 baycom_ser_fdx= [HW,AX25]
565 BayCom Serial Port AX.25 Modem (Full Duplex Mode)
566 Format: <io>,<irq>,<mode>[,<baud>]
567 See header of drivers/net/hamradio/baycom_ser_fdx.c.
569 baycom_ser_hdx= [HW,AX25]
570 BayCom Serial Port AX.25 Modem (Half Duplex Mode)
571 Format: <io>,<irq>,<mode>
572 See header of drivers/net/hamradio/baycom_ser_hdx.c.
574 blkdevparts= Manual partition parsing of block device(s) for
575 embedded devices based on command line input.
576 See Documentation/block/cmdline-partition.txt
578 boot_delay= Milliseconds to delay each printk during boot.
579 Values larger than 10 seconds (10000) are changed to
583 bootmem_debug [KNL] Enable bootmem allocator debug messages.
586 Disable BERT OS support on buggy BIOSes.
588 bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards)
589 bttv.radio= Most important insmod options are available as
591 bttv.pll= See Documentation/video4linux/bttv/Insmod-options
594 bulk_remove=off [PPC] This parameter disables the use of the pSeries
595 firmware feature for flushing multiple hpte entries
598 c101= [NET] Moxa C101 synchronous serial card
600 cachesize= [BUGS=X86-32] Override level 2 CPU cache size detection.
601 Sometimes CPU hardware bugs make them report the cache
602 size incorrectly. The kernel will attempt work arounds
603 to fix known problems, but for some CPUs it is not
604 possible to determine what the correct size should be.
605 This option provides an override for these situations.
607 ca_keys= [KEYS] This parameter identifies a specific key(s) on
608 the system trusted keyring to be used for certificate
610 format: { id:<keyid> | builtin }
612 cca= [MIPS] Override the kernel pages' cache coherency
613 algorithm. Accepted values range from 0 to 7
614 inclusive. See arch/mips/include/asm/pgtable-bits.h
615 for platform specific values (SB1, Loongson3 and
618 ccw_timeout_log [S390]
619 See Documentation/s390/CommonIO for details.
621 cgroup_disable= [KNL] Disable a particular controller
622 Format: {name of the controller(s) to disable}
623 The effects of cgroup_disable=foo are:
624 - foo isn't auto-mounted if you mount all cgroups in
626 - foo isn't visible as an individually mountable
628 {Currently only "memory" controller deal with this and
629 cut the overhead, others just disable the usage. So
630 only cgroup_disable=memory is actually worthy}
632 cgroup_no_v1= [KNL] Disable one, multiple, all cgroup controllers in v1
633 Format: { controller[,controller...] | "all" }
634 Like cgroup_disable, but only applies to cgroup v1;
635 the blacklisted controllers remain available in cgroup2.
637 cgroup.memory= [KNL] Pass options to the cgroup memory controller.
639 nosocket -- Disable socket memory accounting.
640 nokmem -- Disable kernel memory accounting.
642 checkreqprot [SELINUX] Set initial checkreqprot flag value.
643 Format: { "0" | "1" }
644 See security/selinux/Kconfig help text.
645 0 -- check protection applied by kernel (includes
646 any implied execute protection).
647 1 -- check protection requested by application.
648 Default value is set via a kernel config option.
649 Value can be changed at runtime via
650 /selinux/checkreqprot.
653 See Documentation/s390/CommonIO for details.
656 Prevents the clock framework from automatically gating
657 clocks that have not been explicitly enabled by a Linux
658 device driver but are enabled in hardware at reset or
659 by the bootloader/firmware. Note that this does not
660 force such clocks to be always-on nor does it reserve
661 those clocks in any way. This parameter is useful for
662 debug and development, but should not be needed on a
663 platform with proper driver support. For more
664 information, see Documentation/clk.txt.
666 clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
668 Forces specified clocksource (if available) to be used
669 when calculating gettimeofday(). If specified
670 clocksource is not available, it defaults to PIT.
671 Format: { pit | tsc | cyclone | pmtmr }
673 clocksource= Override the default clocksource
675 Override the default clocksource and use the clocksource
676 with the name specified.
677 Some clocksource names to choose from, depending on
679 [all] jiffies (this is the base, fallback clocksource)
681 [ARM] imx_timer1,OSTS,netx_timer,mpu_timer2,
682 pxa_timer,timer3,32k_counter,timer0_1
684 [X86-32] pit,hpet,tsc;
685 scx200_hrt on Geode; cyclone on IBM x440
693 clocksource.arm_arch_timer.evtstrm=
696 Enable/disable the eventstream feature of the ARM
697 architected timer so that code using WFE-based polling
698 loops can be debugged more effectively on production
701 clocksource.arm_arch_timer.fsl-a008585=
704 Enable/disable the workaround of Freescale/NXP
705 erratum A-008585. This can be useful for KVM
706 guests, if the guest device tree doesn't show the
707 erratum. If unspecified, the workaround is
708 enabled based on the device tree.
710 clearcpuid=BITNUM [X86]
711 Disable CPUID feature X for the kernel. See
712 arch/x86/include/asm/cpufeatures.h for the valid bit
713 numbers. Note the Linux specific bits are not necessarily
714 stable over kernel options, but the vendor specific
716 Also note that user programs calling CPUID directly
717 or using the feature without checking anything
718 will still see it. This just prevents it from
719 being used by the kernel or shown in /proc/cpuinfo.
720 Also note the kernel might malfunction if you disable
723 cma=nn[MG]@[start[MG][-end[MG]]]
725 Sets the size of kernel global memory area for
726 contiguous memory allocations and optionally the
727 placement constraint by the physical address range of
728 memory allocations. A value of 0 disables CMA
729 altogether. For more information, see
730 include/linux/dma-contiguous.h
732 cmo_free_hint= [PPC] Format: { yes | no }
733 Specify whether pages are marked as being inactive
734 when they are freed. This is used in CMO environments
735 to determine OS memory pressure for page stealing by
739 coherent_pool=nn[KMG] [ARM,KNL]
740 Sets the size of memory pool for coherent, atomic dma
741 allocations, by default set to 256K.
743 code_bytes [X86] How many bytes of object code to print
748 com20020= [HW,NET] ARCnet - COM20020 chipset
750 <io>[,<irq>[,<nodeID>[,<backplane>[,<ckp>[,<timeout>]]]]]
752 com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers)
756 ARCnet - COM90xx chipset (memory-mapped buffers)
757 Format: <io>[,<irq>[,<memstart>]]
759 condev= [HW,S390] console device
762 console= [KNL] Output console device and options.
764 tty<n> Use the virtual console device <n>.
768 Use the specified serial port. The options are of
769 the form "bbbbpnf", where "bbbb" is the baud rate,
770 "p" is parity ("n", "o", or "e"), "n" is number of
771 bits, and "f" is flow control ("r" for RTS or
772 omit it). Default is "9600n8".
774 See Documentation/serial-console.txt for more
776 Documentation/networking/netconsole.txt for an
779 uart[8250],io,<addr>[,options]
780 uart[8250],mmio,<addr>[,options]
781 uart[8250],mmio16,<addr>[,options]
782 uart[8250],mmio32,<addr>[,options]
783 uart[8250],0x<addr>[,options]
784 Start an early, polled-mode console on the 8250/16550
785 UART at the specified I/O port or MMIO address,
786 switching to the matching ttyS device later.
787 MMIO inter-register address stride is either 8-bit
788 (mmio), 16-bit (mmio16), or 32-bit (mmio32).
789 If none of [io|mmio|mmio16|mmio32], <addr> is assumed
790 to be equivalent to 'mmio'. 'options' are specified in
791 the same format described for ttyS above; if unspecified,
792 the h/w is not re-initialized.
794 hvc<n> Use the hypervisor console device <n>. This is for
795 both Xen and PowerPC hypervisors.
797 If the device connected to the port is not a TTY but a braille
798 device, prepend "brl," before the device type, for instance
800 For now, only VisioBraille is supported.
802 consoleblank= [KNL] The console blank (screen saver) timeout in
803 seconds. Defaults to 10*60 = 10mins. A value of 0
804 disables the blank timer.
807 [KNL] Change the default value for
808 /proc/<pid>/coredump_filter.
809 See also Documentation/filesystems/proc.txt.
811 cpuidle.off=1 [CPU_IDLE]
812 disable the cpuidle sub-system
815 [X86] Delay for N microsec between assert and de-assert
816 of APIC INIT to start processors. This delay occurs
817 on every CPU online, such as boot, and resume from suspend.
820 cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
822 <first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
824 crashkernel=size[KMG][@offset[KMG]]
825 [KNL] Using kexec, Linux can switch to a 'crash kernel'
826 upon panic. This parameter reserves the physical
827 memory region [offset, offset + size] for that kernel
828 image. If '@offset' is omitted, then a suitable offset
829 is selected automatically. Check
830 Documentation/kdump/kdump.txt for further details.
832 crashkernel=range1:size1[,range2:size2,...][@offset]
833 [KNL] Same as above, but depends on the memory
834 in the running system. The syntax of range is
835 start-[end] where start and end are both
836 a memory unit (amount[KMG]). See also
837 Documentation/kdump/kdump.txt for an example.
839 crashkernel=size[KMG],high
840 [KNL, x86_64] range could be above 4G. Allow kernel
841 to allocate physical memory region from top, so could
842 be above 4G if system have more than 4G ram installed.
843 Otherwise memory region will be allocated below 4G, if
845 It will be ignored if crashkernel=X is specified.
846 crashkernel=size[KMG],low
847 [KNL, x86_64] range under 4G. When crashkernel=X,high
848 is passed, kernel could allocate physical memory region
849 above 4G, that cause second kernel crash on system
850 that require some amount of low memory, e.g. swiotlb
851 requires at least 64M+32K low memory, also enough extra
852 low memory is needed to make sure DMA buffers for 32-bit
853 devices won't run out. Kernel would try to allocate at
854 at least 256M below 4G automatically.
855 This one let user to specify own low range under 4G
856 for second kernel instead.
857 0: to disable low allocation.
858 It will be ignored when crashkernel=X,high is not used
859 or memory reserved is below 4G.
862 [KNL] Disable crypto self-tests
867 cs89x0_media= [HW,NET]
868 Format: { rj45 | aui | bnc }
871 See header of drivers/s390/block/dasd_devmap.c.
873 db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port
874 (one device per port)
875 Format: <port#>,<type>
876 See also Documentation/input/joystick-parport.txt
878 ddebug_query= [KNL,DYNAMIC_DEBUG] Enable debug messages at early boot
879 time. See Documentation/dynamic-debug-howto.txt for
880 details. Deprecated, see dyndbg.
882 debug [KNL] Enable kernel debugging (events log level).
885 [KNL] verbose self-tests
887 Print debugging info while doing the locking API
889 We default to 0 (no extra messages), setting it to
890 1 will print _a lot_ more information - normally
891 only useful to kernel developers.
893 debug_objects [KNL] Enable object debugging
896 [KNL] Disable object debugging
898 debug_guardpage_minorder=
899 [KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
900 parameter allows control of the order of pages that will
901 be intentionally kept free (and hence protected) by the
902 buddy allocator. Bigger value increase the probability
903 of catching random memory corruption, but reduce the
904 amount of memory for normal system use. The maximum
905 possible value is MAX_ORDER/2. Setting this parameter
906 to 1 or 2 should be enough to identify most random
907 memory corruption problems caused by bugs in kernel or
908 driver code when a CPU writes to (or reads from) a
909 random memory location. Note that there exists a class
910 of memory corruptions problems caused by buggy H/W or
911 F/W or by drivers badly programing DMA (basically when
912 memory is written at bus level and the CPU MMU is
913 bypassed) which are not detectable by
914 CONFIG_DEBUG_PAGEALLOC, hence this option will not help
915 tracking down these problems.
918 [KNL] When CONFIG_DEBUG_PAGEALLOC is set, this
919 parameter enables the feature at boot time. In
920 default, it is disabled. We can avoid allocating huge
921 chunk of memory for debug pagealloc if we don't enable
922 it at boot time and the system will work mostly same
923 with the kernel built without CONFIG_DEBUG_PAGEALLOC.
924 on: enable the feature
926 debugpat [X86] Enable PAT debugging
928 decnet.addr= [HW,NET]
929 Format: <area>[,<node>]
930 See also Documentation/networking/decnet.txt.
933 [same as hugepagesz=] The size of the default
934 HugeTLB page size. This is the size represented by
935 the legacy /proc/ hugepages APIs, used for SHM, and
936 default size when mounting hugetlbfs filesystems.
937 Defaults to the default architecture's huge page size
941 Set number of hash buckets for dentry cache.
943 disable_1tb_segments [PPC]
944 Disables the use of 1TB hash page table segments. This
945 causes the kernel to fall back to 256MB segments which
946 can be useful when debugging issues that require an SLB
950 See Documentation/networking/ipv6.txt.
953 Disable RADIX MMU mode on POWER9
955 disable_cpu_apicid= [X86,APIC,SMP]
957 The number of initial APIC ID for the
958 corresponding CPU to be disabled at boot,
959 mostly used for the kdump 2nd kernel to
960 disable BSP to wake up multiple CPUs without
961 causing system reset or hang due to sending
964 disable_ddw [PPC/PSERIES]
965 Disable Dynamic DMA Window support. Use this if
966 to workaround buggy firmware.
969 See Documentation/networking/ipv6.txt.
971 disable_mtrr_cleanup [X86]
972 The kernel tries to adjust MTRR layout from continuous
973 to discrete, to make X server driver able to add WB
974 entry later. This parameter disables that.
976 disable_mtrr_trim [X86, Intel and AMD only]
977 By default the kernel will trim any uncacheable
978 memory out of your available memory pool based on
979 MTRR settings. This parameter disables that behavior,
980 possibly causing your machine to run very slowly.
982 disable_timer_pin_1 [X86]
983 Disable PIN 1 of APIC timer
984 Can be useful to work around chipset bugs.
986 dis_ucode_ldr [X86] Disable the microcode loader.
988 dma_debug=off If the kernel is compiled with DMA_API_DEBUG support,
989 this option disables the debugging code at boot.
991 dma_debug_entries=<number>
992 This option allows to tune the number of preallocated
993 entries for DMA-API debugging code. One entry is
994 required per DMA-API allocation. Use this if the
995 DMA-API debugging code disables itself because the
996 architectural default is too low.
998 dma_debug_driver=<driver_name>
999 With this option the DMA-API debugging driver
1000 filter feature can be enabled at boot time. Just
1001 pass the driver to filter for as the parameter.
1002 The filter can be disabled or changed to another
1003 driver later using sysfs.
1005 drm_kms_helper.edid_firmware=[<connector>:]<file>[,[<connector>:]<file>]
1006 Broken monitors, graphic adapters, KVMs and EDIDless
1007 panels may send no or incorrect EDID data sets.
1008 This parameter allows to specify an EDID data sets
1009 in the /lib/firmware directory that are used instead.
1010 Generic built-in EDID data sets are used, if one of
1011 edid/1024x768.bin, edid/1280x1024.bin,
1012 edid/1680x1050.bin, or edid/1920x1080.bin is given
1013 and no file with the same name exists. Details and
1014 instructions how to build your own EDID data are
1015 available in Documentation/EDID/HOWTO.txt. An EDID
1016 data set will only be used for a particular connector,
1017 if its name and a colon are prepended to the EDID
1018 name. Each connector may use a unique EDID data
1019 set by separating the files with a comma. An EDID
1020 data set with no connector name will be used for
1021 any connectors not explicitly specified.
1025 dyndbg[="val"] [KNL,DYNAMIC_DEBUG]
1026 module.dyndbg[="val"]
1027 Enable debug messages at boot time. See
1028 Documentation/dynamic-debug-howto.txt for details.
1030 nompx [X86] Disables Intel Memory Protection Extensions.
1031 See Documentation/x86/intel_mpx.txt for more
1032 information about the feature.
1034 nopku [X86] Disable Memory Protection Keys CPU feature found
1038 on enable eager fpu restore
1039 off disable eager fpu restore
1040 auto selects the default scheme, which automatically
1041 enables eagerfpu restore for xsaveopt.
1043 module.async_probe [KNL]
1044 Enable asynchronous probe on this module.
1046 early_ioremap_debug [KNL]
1047 Enable debug messages in early_ioremap support. This
1048 is useful for tracking down temporary early mappings
1049 which are not unmapped.
1051 earlycon= [KNL] Output early console device and options.
1053 When used with no options, the early console is
1054 determined by the stdout-path property in device
1058 Start an early, polled-mode console on a cadence serial
1059 port at the specified address. The cadence serial port
1060 must already be setup and configured. Options are not
1063 uart[8250],io,<addr>[,options]
1064 uart[8250],mmio,<addr>[,options]
1065 uart[8250],mmio32,<addr>[,options]
1066 uart[8250],mmio32be,<addr>[,options]
1067 uart[8250],0x<addr>[,options]
1068 Start an early, polled-mode console on the 8250/16550
1069 UART at the specified I/O port or MMIO address.
1070 MMIO inter-register address stride is either 8-bit
1071 (mmio) or 32-bit (mmio32 or mmio32be).
1072 If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
1073 to be equivalent to 'mmio'. 'options' are specified
1074 in the same format described for "console=ttyS<n>"; if
1075 unspecified, the h/w is not initialized.
1079 Start an early, polled-mode console on a pl011 serial
1080 port at the specified address. The pl011 serial port
1081 must already be setup and configured. Options are not
1082 yet supported. If 'mmio32' is specified, then only
1083 the driver will use only 32-bit accessors to read/write
1084 the device registers.
1087 Start an early, polled-mode console on a meson serial
1088 port at the specified address. The serial port must
1089 already be setup and configured. Options are not yet
1093 Start an early, polled-mode console on an msm serial
1094 port at the specified address. The serial port
1095 must already be setup and configured. Options are not
1098 msm_serial_dm,<addr>
1099 Start an early, polled-mode console on an msm serial
1100 dm port at the specified address. The serial port
1101 must already be setup and configured. Options are not
1104 smh Use ARM semihosting calls for early console.
1112 Use early console provided by serial driver available
1113 on Samsung SoCs, requires selecting proper type and
1114 a correct base address of the selected UART port. The
1115 serial port must already be setup and configured.
1116 Options are not yet supported.
1120 Use early console provided by Freescale LP UART driver
1121 found on Freescale Vybrid and QorIQ LS1021A processors.
1122 A valid base address must be provided, and the serial
1123 port must already be setup and configured.
1125 armada3700_uart,<addr>
1126 Start an early, polled-mode console on the
1127 Armada 3700 serial port at the specified
1128 address. The serial port must already be setup
1129 and configured. Options are not yet supported.
1131 earlyprintk= [X86,SH,BLACKFIN,ARM,M68k]
1135 earlyprintk=serial[,ttySn[,baudrate]]
1136 earlyprintk=serial[,0x...[,baudrate]]
1137 earlyprintk=ttySn[,baudrate]
1138 earlyprintk=dbgp[debugController#]
1139 earlyprintk=pciserial,bus:device.function[,baudrate]
1141 earlyprintk is useful when the kernel crashes before
1142 the normal console is initialized. It is not enabled by
1143 default because it has some cosmetic problems.
1145 Append ",keep" to not disable it when the real console
1148 Only one of vga, efi, serial, or usb debug port can
1151 Currently only ttyS0 and ttyS1 may be specified by
1152 name. Other I/O ports may be explicitly specified
1153 on some architectures (x86 and arm at least) by
1154 replacing ttySn with an I/O port address, like this:
1155 earlyprintk=serial,0x1008,115200
1156 You can find the port for a given device in
1157 /proc/tty/driver/serial:
1158 2: uart:ST16650V2 port:00001008 irq:18 ...
1160 Interaction with the standard serial driver is not
1163 The VGA and EFI output is eventually overwritten by
1166 The xen output can only be used by Xen PV guests.
1168 edac_report= [HW,EDAC] Control how to report EDAC event
1169 Format: {"on" | "off" | "force"}
1170 on: enable EDAC to report H/W event. May be overridden
1171 by other higher priority error reporting module.
1172 off: disable H/W event reporting through EDAC.
1173 force: enforce the use of EDAC to report H/W event.
1176 ekgdboc= [X86,KGDB] Allow early kernel console debugging
1179 This is designed to be used in conjunction with
1180 the boot argument: earlyprintk=vga
1183 Format: {"off" | "on" | "skip[mbr]"}
1186 Format: { "old_map", "nochunk", "noruntime", "debug" }
1187 old_map [X86-64]: switch to the old ioremap-based EFI
1188 runtime services mapping. 32-bit still uses this one by
1190 nochunk: disable reading files in "chunks" in the EFI
1191 boot stub, as chunking can cause problems with some
1192 firmware implementations.
1193 noruntime : disable EFI runtime services support
1194 debug: enable misc debug output
1196 efi_no_storage_paranoia [EFI; X86]
1197 Using this parameter you can use more than 50% of
1198 your efi variable storage. Use this parameter only if
1199 you are really sure that your UEFI does sane gc and
1200 fulfills the spec otherwise your board may brick.
1202 efi_fake_mem= nn[KMG]@ss[KMG]:aa[,nn[KMG]@ss[KMG]:aa,..] [EFI; X86]
1203 Add arbitrary attribute to specific memory range by
1204 updating original EFI memory map.
1205 Region of memory which aa attribute is added to is
1207 If efi_fake_mem=2G@4G:0x10000,2G@0x10a0000000:0x10000
1208 is specified, EFI_MEMORY_MORE_RELIABLE(0x10000)
1209 attribute is added to range 0x100000000-0x180000000 and
1210 0x10a0000000-0x1120000000.
1212 Using this parameter you can do debugging of EFI memmap
1213 related feature. For example, you can do debugging of
1214 Address Range Mirroring feature even if your box
1217 efivar_ssdt= [EFI; X86] Name of an EFI variable that contains an SSDT
1218 that is to be dynamically loaded by Linux. If there are
1219 multiple variables with the same name but with different
1220 vendor GUIDs, all of them will be loaded. See
1221 Documentation/acpi/ssdt-overlays.txt for details.
1224 eisa_irq_edge= [PARISC,HW]
1225 See header of drivers/parisc/eisa.c.
1228 See comment before function elanfreq_setup() in
1229 arch/x86/kernel/cpu/cpufreq/elanfreq.c.
1232 Format: {"cfq" | "deadline" | "noop"}
1233 See Documentation/block/cfq-iosched.txt and
1234 Documentation/block/deadline-iosched.txt for details.
1236 elfcorehdr=[size[KMG]@]offset[KMG] [IA64,PPC,SH,X86,S390]
1237 Specifies physical address of start of kernel core
1238 image elf header and optionally the size. Generally
1239 kexec loader will pass this option to capture kernel.
1240 See Documentation/kdump/kdump.txt for details.
1242 enable_mtrr_cleanup [X86]
1243 The kernel tries to adjust MTRR layout from continuous
1244 to discrete, to make X server driver able to add WB
1245 entry later. This parameter enables that.
1247 enable_timer_pin_1 [X86]
1248 Enable PIN 1 of APIC timer
1249 Can be useful to work around chipset bugs
1250 (in particular on some ATI chipsets).
1251 The kernel tries to set a reasonable default.
1253 enforcing [SELINUX] Set initial enforcing status.
1255 See security/selinux/Kconfig help text.
1256 0 -- permissive (log only, no denials).
1257 1 -- enforcing (deny and log).
1259 Value can be changed at runtime via /selinux/enforce.
1262 Disable Error Record Serialization Table (ERST)
1265 ether= [HW,NET] Ethernet cards parameters
1266 This option is obsoleted by the "netdev=" option, which
1267 has equivalent usage. See its documentation for details.
1271 Permit 'security.evm' to be updated regardless of
1272 current integrity status.
1276 fail_make_request=[KNL]
1277 General fault injection mechanism.
1278 Format: <interval>,<probability>,<space>,<times>
1279 See also Documentation/fault-injection/.
1282 See Documentation/blockdev/floppy.txt.
1284 force_pal_cache_flush
1285 [IA-64] Avoid check_sal_cache_flush which may hang on
1286 buggy SAL_CACHE_FLUSH implementations. Using this
1287 parameter will force ia64_sal_cache_flush to call
1288 ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
1291 Forcefully enable Physical Address Extension (PAE).
1292 Many Pentium M systems disable PAE but may have a
1293 functionally usable PAE implementation.
1294 Warning: use of this parameter will taint the kernel
1295 and may cause unknown problems.
1298 [FTRACE] will set and start the specified tracer
1299 as early as possible in order to facilitate early
1302 ftrace_dump_on_oops[=orig_cpu]
1303 [FTRACE] will dump the trace buffers on oops.
1304 If no parameter is passed, ftrace will dump
1305 buffers of all CPUs, but if you pass orig_cpu, it will
1306 dump only the buffer of the CPU that triggered the
1309 ftrace_filter=[function-list]
1310 [FTRACE] Limit the functions traced by the function
1311 tracer at boot up. function-list is a comma separated
1312 list of functions. This list can be changed at run
1313 time by the set_ftrace_filter file in the debugfs
1316 ftrace_notrace=[function-list]
1317 [FTRACE] Do not trace the functions specified in
1318 function-list. This list can be changed at run time
1319 by the set_ftrace_notrace file in the debugfs
1322 ftrace_graph_filter=[function-list]
1323 [FTRACE] Limit the top level callers functions traced
1324 by the function graph tracer at boot up.
1325 function-list is a comma separated list of functions
1326 that can be changed at run time by the
1327 set_graph_function file in the debugfs tracing directory.
1329 ftrace_graph_notrace=[function-list]
1330 [FTRACE] Do not trace from the functions specified in
1331 function-list. This list is a comma separated list of
1332 functions that can be changed at run time by the
1333 set_graph_notrace file in the debugfs tracing directory.
1336 [HW,JOY] Multisystem joystick and NES/SNES/PSX pad
1337 support via parallel port (up to 5 devices per port)
1338 Format: <port#>,<pad1>,<pad2>,<pad3>,<pad4>,<pad5>
1339 See also Documentation/input/joystick-parport.txt
1343 gart_fix_e820= [X86_64] disable the fix e820 for K8 GART
1347 gcov_persist= [GCOV] When non-zero (default), profiling data for
1348 kernel modules is saved and remains accessible via
1349 debugfs, even when the module is unloaded/reloaded.
1350 When zero, profiling data is discarded and associated
1351 debugfs files are removed at module unload time.
1353 gpt [EFI] Forces disk with valid GPT signature but
1354 invalid Protective MBR to be treated as GPT. If the
1355 primary GPT is corrupted, it enables the backup/alternate
1356 GPT to be used instead.
1358 grcan.enable0= [HW] Configuration of physical interface 0. Determines
1359 the "Enable 0" bit of the configuration register.
1362 grcan.enable1= [HW] Configuration of physical interface 1. Determines
1363 the "Enable 0" bit of the configuration register.
1366 grcan.select= [HW] Select which physical interface to use.
1369 grcan.txsize= [HW] Sets the size of the tx buffer.
1370 Format: <unsigned int> such that (txsize & ~0x1fffc0) == 0.
1372 grcan.rxsize= [HW] Sets the size of the rx buffer.
1373 Format: <unsigned int> such that (rxsize & ~0x1fffc0) == 0.
1376 hardlockup_all_cpu_backtrace=
1377 [KNL] Should the hard-lockup detector generate
1378 backtraces on all cpus.
1381 hashdist= [KNL,NUMA] Large hashes allocated during boot
1382 are distributed across NUMA nodes. Defaults on
1383 for 64-bit NUMA, off otherwise.
1384 Format: 0 | 1 (for off | on)
1386 hcl= [IA-64] SGI's Hardware Graph compatibility layer
1388 hd= [EIDE] (E)IDE hard drive subsystem geometry
1389 Format: <cyl>,<head>,<sect>
1392 Disable Hardware Error Source Table (HEST) support;
1393 corresponding firmware-first mode error processing
1394 logic will be disabled.
1396 highmem=nn[KMG] [KNL,BOOT] forces the highmem zone to have an exact
1397 size of <nn>. This works even on boxes that have no
1398 highmem otherwise. This also works to reduce highmem
1399 size on bigger boxes.
1401 highres= [KNL] Enable/disable high resolution timer mode.
1402 Valid parameters: "on", "off"
1406 See Documentation/isdn/README.HiSax.
1410 hpet= [X86-32,HPET] option to control HPET usage
1411 Format: { enable (default) | disable | force |
1413 disable: disable HPET and use PIT instead
1414 force: allow force enabled of undocumented chips (ICH4,
1416 verbose: show contents of HPET registers during setup
1418 hpet_mmap= [X86, HPET_MMAP] Allow userspace to mmap HPET
1419 registers. Default set by CONFIG_HPET_MMAP_DEFAULT.
1421 hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot.
1422 hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages.
1423 On x86-64 and powerpc, this option can be specified
1424 multiple times interleaved with hugepages= to reserve
1425 huge pages of different sizes. Valid pages sizes on
1426 x86-64 are 2M (when the CPU supports "pse") and 1G
1427 (when the CPU supports the "pdpe1gb" cpuinfo flag).
1429 hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC)
1430 terminal devices. Valid values: 0..8
1431 hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs.
1432 If specified, z/VM IUCV HVC accepts connections
1433 from listed z/VM user IDs only.
1435 hwthread_map= [METAG] Comma-separated list of Linux cpu id to
1436 hardware thread id mappings.
1437 Format: <cpu>:<hwthread>
1440 Do not unregister boot console at start. This is only
1441 useful for debugging when something happens in the window
1442 between unregistering the boot console and initializing
1445 i2c_bus= [HW] Override the default board specific I2C bus speed
1446 or register an additional I2C bus that is not
1447 registered from board initialization code.
1451 i8042.debug [HW] Toggle i8042 debug mode
1452 i8042.unmask_kbd_data
1453 [HW] Enable printing of interrupt data from the KBD port
1454 (disabled by default, and as a pre-condition
1455 requires that i8042.debug=1 be enabled)
1456 i8042.direct [HW] Put keyboard port into non-translated mode
1457 i8042.dumbkbd [HW] Pretend that controller can only read data from
1458 keyboard and cannot control its state
1459 (Don't attempt to blink the leds)
1460 i8042.noaux [HW] Don't check for auxiliary (== mouse) port
1461 i8042.nokbd [HW] Don't check/create keyboard port
1462 i8042.noloop [HW] Disable the AUX Loopback command while probing
1464 i8042.nomux [HW] Don't check presence of an active multiplexing
1466 i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
1468 i8042.notimeout [HW] Ignore timeout condition signalled by controller
1469 i8042.reset [HW] Reset the controller during init and cleanup
1470 i8042.unlock [HW] Unlock (ignore) the keylock
1471 i8042.kbdreset [HW] Reset device connected to KBD port
1475 i8k.ignore_dmi [HW] Continue probing hardware even if DMI data
1476 indicates that the driver is running on unsupported
1478 i8k.force [HW] Activate i8k driver even if SMM BIOS signature
1479 does not match list of supported models.
1481 [HW] Report power status in /proc/i8k
1482 (disabled by default)
1483 i8k.restricted [HW] Allow controlling fans only if SYS_ADMIN
1486 i915.invert_brightness=
1487 [DRM] Invert the sense of the variable that is used to
1488 set the brightness of the panel backlight. Normally a
1489 brightness value of 0 indicates backlight switched off,
1490 and the maximum of the brightness value sets the backlight
1491 to maximum brightness. If this parameter is set to 0
1492 (default) and the machine requires it, or this parameter
1493 is set to 1, a brightness value of 0 sets the backlight
1494 to maximum brightness, and the maximum of the brightness
1495 value switches the backlight off.
1496 -1 -- never invert brightness
1497 0 -- machine default
1498 1 -- force brightness inversion
1501 Format: <io>[,<membase>[,<icn_id>[,<icn_id2>]]]
1503 ide-core.nodma= [HW] (E)IDE subsystem
1504 Format: =0.0 to prevent dma on hda, =0.1 hdb =1.0 hdc
1505 .vlb_clock .pci_clock .noflush .nohpa .noprobe .nowerr
1506 .cdrom .chs .ignore_cable are additional options
1507 See Documentation/ide/ide.txt.
1509 ide-generic.probe-mask= [HW] (E)IDE subsystem
1511 Probe mask for legacy ISA IDE ports. Depending on
1512 platform up to 6 ports are supported, enabled by
1513 setting corresponding bits in the mask to 1. The
1514 default value is 0x0, which has a special meaning.
1515 On systems that have PCI, it triggers scanning the
1516 PCI bus for the first and the second port, which
1517 are then probed. On systems without PCI the value
1518 of 0x0 enables probing the two first ports as if it
1521 ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
1522 Claim all unknown PCI IDE storage controllers.
1525 Format: idle=poll, idle=halt, idle=nomwait
1526 Poll forces a polling idle loop that can slightly
1527 improve the performance of waking up a idle CPU, but
1528 will use a lot of power and make the system run hot.
1530 idle=halt: Halt is forced to be used for CPU idle.
1531 In such case C2/C3 won't be used again.
1532 idle=nomwait: Disable mwait for CPU C-states
1534 ieee754= [MIPS] Select IEEE Std 754 conformance mode
1535 Format: { strict | legacy | 2008 | relaxed }
1538 Choose which programs will be accepted for execution
1539 based on the IEEE 754 NaN encoding(s) supported by
1540 the FPU and the NaN encoding requested with the value
1541 of an ELF file header flag individually set by each
1542 binary. Hardware implementations are permitted to
1543 support either or both of the legacy and the 2008 NaN
1546 Available settings are as follows:
1547 strict accept binaries that request a NaN encoding
1548 supported by the FPU
1549 legacy only accept legacy-NaN binaries, if supported
1551 2008 only accept 2008-NaN binaries, if supported
1553 relaxed accept any binaries regardless of whether
1554 supported by the FPU
1556 The FPU emulator is always able to support both NaN
1557 encodings, so if no FPU hardware is present or it has
1558 been disabled with 'nofpu', then the settings of
1559 'legacy' and '2008' strap the emulator accordingly,
1560 'relaxed' straps the emulator for both legacy-NaN and
1561 2008-NaN, whereas 'strict' enables legacy-NaN only on
1562 legacy processors and both NaN encodings on MIPS32 or
1565 The setting for ABS.fmt/NEG.fmt instruction execution
1566 mode generally follows that for the NaN encoding,
1567 except where unsupported by hardware.
1569 ignore_loglevel [KNL]
1570 Ignore loglevel setting - this will print /all/
1571 kernel messages to the console. Useful for debugging.
1572 We also add it as printk module parameter, so users
1573 could change it dynamically, usually by
1574 /sys/module/printk/parameters/ignore_loglevel.
1577 Ignore RLIMIT_DATA setting for data mappings,
1578 print warning at first misuse. Can be changed via
1579 /sys/module/kernel/parameters/ignore_rlimit_data.
1581 ihash_entries= [KNL]
1582 Set number of hash buckets for inode cache.
1584 ima_appraise= [IMA] appraise integrity measurements
1585 Format: { "off" | "enforce" | "fix" | "log" }
1588 ima_appraise_tcb [IMA]
1589 The builtin appraise policy appraises all files
1593 Format: { md5 | sha1 | rmd160 | sha256 | sha384
1597 The list of supported hash algorithms is defined
1598 in crypto/hash_info.h.
1601 The builtin measurement policy to load during IMA
1602 setup. Specyfing "tcb" as the value, measures all
1603 programs exec'd, files mmap'd for exec, and all files
1604 opened with the read mode bit set by either the
1605 effective uid (euid=0) or uid=0.
1608 ima_tcb [IMA] Deprecated. Use ima_policy= instead.
1609 Load a policy which meets the needs of the Trusted
1610 Computing Base. This means IMA will measure all
1611 programs exec'd, files mmap'd for exec, and all files
1612 opened for read by uid=0.
1615 Select one of defined IMA measurements template formats.
1616 Formats: { "ima" | "ima-ng" | "ima-sig" }
1620 [IMA] Define a custom template format.
1621 Format: { "field1|...|fieldN" }
1623 ima.ahash_minsize= [IMA] Minimum file size for asynchronous hash usage
1624 Format: <min_file_size>
1625 Set the minimal file size for using asynchronous hash.
1626 If left unspecified, ahash usage is disabled.
1628 ahash performance varies for different data sizes on
1629 different crypto accelerators. This option can be used
1630 to achieve the best performance for a particular HW.
1632 ima.ahash_bufsize= [IMA] Asynchronous hash buffer size
1634 Set hashing buffer size. Default: 4k.
1636 ahash performance varies for different chunk sizes on
1637 different crypto accelerators. This option can be used
1638 to achieve best performance for particular HW.
1642 Run specified binary instead of /sbin/init as init
1645 initcall_debug [KNL] Trace initcalls as they are executed. Useful
1646 for working out where the kernel is dying during
1649 initcall_blacklist= [KNL] Do not execute a comma-separated list of
1650 initcall functions. Useful for debugging built-in
1651 modules and initcalls.
1653 initrd= [BOOT] Specify the location of the initial ramdisk
1655 inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver
1658 int_pln_enable [x86] Enable power limit notification interrupt
1660 integrity_audit=[IMA]
1661 Format: { "0" | "1" }
1662 0 -- basic integrity auditing messages. (Default)
1663 1 -- additional integrity auditing messages.
1665 intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option
1667 Enable intel iommu driver.
1669 Disable intel iommu driver.
1670 igfx_off [Default Off]
1671 By default, gfx is mapped as normal device. If a gfx
1672 device has a dedicated DMAR unit, the DMAR unit is
1673 bypassed by not enabling DMAR with this option. In
1674 this case, gfx device will use physical address for
1677 With this option iommu will not optimize to look
1678 for io virtual address below 32-bit forcing dual
1679 address cycle on pci bus for cards supporting greater
1680 than 32-bit addressing. The default is to look
1681 for translation below 32-bit and if not available
1682 then look in the higher range.
1683 strict [Default Off]
1684 With this option on every unmap_single operation will
1685 result in a hardware IOTLB flush operation as opposed
1686 to batching them for performance.
1687 sp_off [Default Off]
1688 By default, super page will be supported if Intel IOMMU
1689 has the capability. With this option, super page will
1691 ecs_off [Default Off]
1692 By default, extended context tables will be supported if
1693 the hardware advertises that it has support both for the
1694 extended tables themselves, and also PASID support. With
1695 this option set, extended tables will not be used even
1696 on hardware which claims to support them.
1698 intel_idle.max_cstate= [KNL,HW,ACPI,X86]
1699 0 disables intel_idle and fall back on acpi_idle.
1700 1 to 6 specify maximum depth of C-state.
1704 Do not enable intel_pstate as the default
1705 scaling driver for the supported processors
1707 Enable intel_pstate on systems that prohibit it by default
1708 in favor of acpi-cpufreq. Forcing the intel_pstate driver
1709 instead of acpi-cpufreq may disable platform features, such
1710 as thermal controls and power capping, that rely on ACPI
1711 P-States information being indicated to OSPM and therefore
1712 should be used with caution. This option does not work with
1713 processors that aren't supported by the intel_pstate driver
1714 or on platforms that use pcc-cpufreq instead of acpi-cpufreq.
1716 Do not enable hardware P state control (HWP)
1719 Only load intel_pstate on systems which support
1720 hardware P state control (HWP) if available.
1722 Enforce ACPI _PPC performance limits. If the Fixed ACPI
1723 Description Table, specifies preferred power management
1724 profile as "Enterprise Server" or "Performance Server",
1725 then this feature is turned on by default.
1727 intremap= [X86-64, Intel-IOMMU]
1728 on enable Interrupt Remapping (default)
1729 off disable Interrupt Remapping
1730 nosid disable Source ID checking
1732 BIOS x2APIC opt-out request will be ignored
1733 nopost disable Interrupt Posting
1735 iomem= Disable strict checking of access to MMIO memory
1736 strict regions from userspace.
1751 nobypass [PPC/POWERNV]
1752 Disable IOMMU bypass, using IOMMU for PCI devices.
1755 io7= [HW] IO7 for Marvel based alpha systems
1756 See comment before marvel_specify_io7 in
1757 arch/alpha/kernel/core_marvel.c.
1759 io_delay= [X86] I/O delay method
1761 Standard port 0x80 based delay
1763 Alternate port 0xed based delay (needed on some systems)
1765 Simple two microseconds delay
1770 See Documentation/filesystems/nfs/nfsroot.txt.
1772 irqaffinity= [SMP] Set the default irq affinity mask
1774 <cpu number>,...,<cpu number>
1776 <cpu number>-<cpu number>
1777 (must be a positive range in ascending order)
1779 <cpu number>,...,<cpu number>-<cpu number>
1782 When an interrupt is not handled search all handlers
1783 for it. Intended to get systems with badly broken
1787 When an interrupt is not handled search all handlers
1788 for it. Also check all handlers each timer
1789 interrupt. Intended to get systems with badly broken
1793 Format: <RDP>,<reset>,<pci_scan>,<verbosity>
1795 isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler.
1797 <cpu number>,...,<cpu number>
1799 <cpu number>-<cpu number>
1800 (must be a positive range in ascending order)
1802 <cpu number>,...,<cpu number>-<cpu number>
1804 This option can be used to specify one or more CPUs
1805 to isolate from the general SMP balancing and scheduling
1806 algorithms. You can move a process onto or off an
1807 "isolated" CPU via the CPU affinity syscalls or cpuset.
1808 <cpu number> begins at 0 and the maximum value is
1809 "number of CPUs in system - 1".
1811 This option is the preferred way to isolate CPUs. The
1812 alternative -- manually setting the CPU mask of all
1813 tasks in the system -- can cause problems and
1814 suboptimal load balancer performance.
1818 ivrs_ioapic [HW,X86_64]
1819 Provide an override to the IOAPIC-ID<->DEVICE-ID
1820 mapping provided in the IVRS ACPI table. For
1821 example, to map IOAPIC-ID decimal 10 to
1822 PCI device 00:14.0 write the parameter as:
1823 ivrs_ioapic[10]=00:14.0
1825 ivrs_hpet [HW,X86_64]
1826 Provide an override to the HPET-ID<->DEVICE-ID
1827 mapping provided in the IVRS ACPI table. For
1828 example, to map HPET-ID decimal 0 to
1829 PCI device 00:14.0 write the parameter as:
1830 ivrs_hpet[0]=00:14.0
1832 ivrs_acpihid [HW,X86_64]
1833 Provide an override to the ACPI-HID:UID<->DEVICE-ID
1834 mapping provided in the IVRS ACPI table. For
1835 example, to map UART-HID:UID AMD0020:0 to
1836 PCI device 00:14.5 write the parameter as:
1837 ivrs_acpihid[00:14.5]=AMD0020:0
1839 js= [HW,JOY] Analog joystick
1840 See Documentation/input/joystick.txt.
1843 When CONFIG_RANDOMIZE_BASE is set, this disables
1844 kernel and module base offset ASLR (Address Space
1845 Layout Randomization).
1849 kernelcore= [KNL,X86,IA-64,PPC]
1850 Format: nn[KMGTPE] | "mirror"
1852 specifies the amount of memory usable by the kernel
1853 for non-movable allocations. The requested amount is
1854 spread evenly throughout all nodes in the system. The
1855 remaining memory in each node is used for Movable
1856 pages. In the event, a node is too small to have both
1857 kernelcore and Movable pages, kernelcore pages will
1858 take priority and other nodes will have a larger number
1859 of Movable pages. The Movable zone is used for the
1860 allocation of pages that may be reclaimed or moved
1861 by the page migration subsystem. This means that
1862 HugeTLB pages may not be allocated from this zone.
1863 Note that allocations like PTEs-from-HighMem still
1864 use the HighMem zone if it exists, and the Normal
1865 zone if it does not.
1867 Instead of specifying the amount of memory (nn[KMGTPE]),
1868 you can specify "mirror" option. In case "mirror"
1869 option is specified, mirrored (reliable) memory is used
1870 for non-movable allocations and remaining memory is used
1871 for Movable pages. nn[KMGTPE] and "mirror" are exclusive,
1872 so you can NOT specify nn[KMGTPE] and "mirror" at the same
1875 kgdbdbgp= [KGDB,HW] kgdb over EHCI usb debug port.
1876 Format: <Controller#>[,poll interval]
1877 The controller # is the number of the ehci usb debug
1878 port as it is probed via PCI. The poll interval is
1879 optional and is the number seconds in between
1880 each poll cycle to the debug port in case you need
1881 the functionality for interrupting the kernel with
1882 gdb or control-c on the dbgp connection. When
1883 not using this parameter you use sysrq-g to break into
1884 the kernel debugger.
1886 kgdboc= [KGDB,HW] kgdb over consoles.
1887 Requires a tty driver that supports console polling,
1888 or a supported polling keyboard driver (non-usb).
1889 Serial only format: <serial_device>[,baud]
1890 keyboard only format: kbd
1891 keyboard and serial format: kbd,<serial_device>[,baud]
1892 Optional Kernel mode setting:
1893 kms, kbd format: kms,kbd
1894 kms, kbd and serial format: kms,kbd,<ser_dev>[,baud]
1896 kgdbwait [KGDB] Stop kernel execution and enter the
1897 kernel debugger at the earliest opportunity.
1899 kmac= [MIPS] korina ethernet MAC address.
1900 Configure the RouterBoard 532 series on-chip
1901 Ethernet adapter MAC address.
1903 kmemleak= [KNL] Boot-time kmemleak enable/disable
1904 Valid arguments: on, off
1906 Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
1909 kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode
1910 Valid arguments: 0, 1, 2
1911 kmemcheck=0 (disabled)
1912 kmemcheck=1 (enabled)
1913 kmemcheck=2 (one-shot mode)
1914 Default: 2 (one-shot mode)
1916 kstack=N [X86] Print N words from the kernel stack
1919 kvm.ignore_msrs=[KVM] Ignore guest accesses to unhandled MSRs.
1920 Default is 0 (don't ignore, but inject #GP)
1922 kvm.mmu_audit= [KVM] This is a R/W parameter which allows audit
1926 kvm-amd.nested= [KVM,AMD] Allow nested virtualization in KVM/SVM.
1927 Default is 1 (enabled)
1929 kvm-amd.npt= [KVM,AMD] Disable nested paging (virtualized MMU)
1931 Default is 1 (enabled) if in 64-bit or 32-bit PAE mode.
1933 kvm-intel.ept= [KVM,Intel] Disable extended page tables
1934 (virtualized MMU) support on capable Intel chips.
1935 Default is 1 (enabled)
1937 kvm-intel.emulate_invalid_guest_state=
1938 [KVM,Intel] Enable emulation of invalid guest states
1939 Default is 0 (disabled)
1941 kvm-intel.flexpriority=
1942 [KVM,Intel] Disable FlexPriority feature (TPR shadow).
1943 Default is 1 (enabled)
1946 [KVM,Intel] Enable VMX nesting (nVMX).
1947 Default is 0 (disabled)
1949 kvm-intel.unrestricted_guest=
1950 [KVM,Intel] Disable unrestricted guest feature
1951 (virtualized real and unpaged mode) on capable
1952 Intel chips. Default is 1 (enabled)
1954 kvm-intel.vpid= [KVM,Intel] Disable Virtual Processor Identification
1955 feature (tagged TLBs) on capable Intel chips.
1956 Default is 1 (enabled)
1962 lapic [X86-32,APIC] Enable the local APIC even if BIOS
1965 lapic= [x86,APIC] "notscdeadline" Do not use TSC deadline
1966 value for LAPIC timer one-shot implementation. Default
1967 back to the programmable timer unit in the LAPIC.
1969 lapic_timer_c2_ok [X86,APIC] trust the local apic timer
1972 libata.dma= [LIBATA] DMA control
1973 libata.dma=0 Disable all PATA and SATA DMA
1974 libata.dma=1 PATA and SATA Disk DMA only
1975 libata.dma=2 ATAPI (CDROM) DMA only
1976 libata.dma=4 Compact Flash DMA only
1977 Combinations also work, so libata.dma=3 enables DMA
1978 for disks and CDROMs, but not CFs.
1980 libata.ignore_hpa= [LIBATA] Ignore HPA limit
1981 libata.ignore_hpa=0 keep BIOS limits (default)
1982 libata.ignore_hpa=1 ignore limits, using full disk
1984 libata.noacpi [LIBATA] Disables use of ACPI in libata suspend/resume
1988 libata.force= [LIBATA] Force configurations. The format is comma
1989 separated list of "[ID:]VAL" where ID is
1990 PORT[.DEVICE]. PORT and DEVICE are decimal numbers
1991 matching port, link or device. Basically, it matches
1992 the ATA ID string printed on console by libata. If
1993 the whole ID part is omitted, the last PORT and DEVICE
1994 values are used. If ID hasn't been specified yet, the
1995 configuration applies to all ports, links and devices.
1997 If only DEVICE is omitted, the parameter applies to
1998 the port and all links and devices behind it. DEVICE
1999 number of 0 either selects the first device or the
2000 first fan-out link behind PMP device. It does not
2001 select the host link. DEVICE number of 15 selects the
2002 host link and device attached to it.
2004 The VAL specifies the configuration to force. As long
2005 as there's no ambiguity shortcut notation is allowed.
2006 For example, both 1.5 and 1.5G would work for 1.5Gbps.
2007 The following configurations can be forced.
2009 * Cable type: 40c, 80c, short40c, unk, ign or sata.
2010 Any ID with matching PORT is used.
2012 * SATA link speed limit: 1.5Gbps or 3.0Gbps.
2014 * Transfer mode: pio[0-7], mwdma[0-4] and udma[0-7].
2015 udma[/][16,25,33,44,66,100,133] notation is also
2018 * [no]ncq: Turn on or off NCQ.
2020 * [no]ncqtrim: Turn off queued DSM TRIM.
2022 * nohrst, nosrst, norst: suppress hard, soft
2025 * rstonce: only attempt one reset during
2026 hot-unplug link recovery
2028 * dump_id: dump IDENTIFY data.
2030 * atapi_dmadir: Enable ATAPI DMADIR bridge support
2032 * disable: Disable this device.
2034 If there are multiple matching configurations changing
2035 the same attribute, the last one is used.
2037 memblock=debug [KNL] Enable memblock debug messages.
2039 load_ramdisk= [RAM] List of ramdisks to load from floppy
2040 See Documentation/blockdev/ramdisk.txt.
2042 lockd.nlm_grace_period=P [NFS] Assign grace period.
2045 lockd.nlm_tcpport=N [NFS] Assign TCP port.
2048 lockd.nlm_timeout=T [NFS] Assign timeout value.
2051 lockd.nlm_udpport=M [NFS] Assign UDP port.
2054 locktorture.nreaders_stress= [KNL]
2055 Set the number of locking read-acquisition kthreads.
2056 Defaults to being automatically set based on the
2057 number of online CPUs.
2059 locktorture.nwriters_stress= [KNL]
2060 Set the number of locking write-acquisition kthreads.
2062 locktorture.onoff_holdoff= [KNL]
2063 Set time (s) after boot for CPU-hotplug testing.
2065 locktorture.onoff_interval= [KNL]
2066 Set time (s) between CPU-hotplug operations, or
2067 zero to disable CPU-hotplug testing.
2069 locktorture.shuffle_interval= [KNL]
2070 Set task-shuffle interval (jiffies). Shuffling
2071 tasks allows some CPUs to go into dyntick-idle
2072 mode during the locktorture test.
2074 locktorture.shutdown_secs= [KNL]
2075 Set time (s) after boot system shutdown. This
2076 is useful for hands-off automated testing.
2078 locktorture.stat_interval= [KNL]
2079 Time (s) between statistics printk()s.
2081 locktorture.stutter= [KNL]
2082 Time (s) to stutter testing, for example,
2083 specifying five seconds causes the test to run for
2084 five seconds, wait for five seconds, and so on.
2085 This tests the locking primitive's ability to
2086 transition abruptly to and from idle.
2088 locktorture.torture_runnable= [BOOT]
2089 Start locktorture running at boot time.
2091 locktorture.torture_type= [KNL]
2092 Specify the locking implementation to test.
2094 locktorture.verbose= [KNL]
2095 Enable additional printk() statements.
2097 logibm.irq= [HW,MOUSE] Logitech Bus Mouse Driver
2100 loglevel= All Kernel Messages with a loglevel smaller than the
2101 console loglevel will be printed to the console. It can
2102 also be changed with klogd or other programs. The
2103 loglevels are defined as follows:
2105 0 (KERN_EMERG) system is unusable
2106 1 (KERN_ALERT) action must be taken immediately
2107 2 (KERN_CRIT) critical conditions
2108 3 (KERN_ERR) error conditions
2109 4 (KERN_WARNING) warning conditions
2110 5 (KERN_NOTICE) normal but significant condition
2111 6 (KERN_INFO) informational
2112 7 (KERN_DEBUG) debug-level messages
2114 log_buf_len=n[KMG] Sets the size of the printk ring buffer,
2115 in bytes. n must be a power of two and greater
2116 than the minimal size. The minimal size is defined
2117 by LOG_BUF_SHIFT kernel config parameter. There is
2118 also CONFIG_LOG_CPU_MAX_BUF_SHIFT config parameter
2119 that allows to increase the default size depending on
2120 the number of CPUs. See init/Kconfig for more details.
2122 logo.nologo [FB] Disables display of the built-in Linux logo.
2123 This may be used to provide more screen space for
2124 kernel log messages and is useful when debugging
2125 kernel boot problems.
2127 lp=0 [LP] Specify parallel ports to use, e.g,
2128 lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses
2129 lp=reset first parallel port). 'lp=0' disables the
2130 lp=auto printer driver. 'lp=reset' (which can be
2131 specified in addition to the ports) causes
2132 attached printers to be reset. Using
2133 lp=port1,port2,... specifies the parallel ports
2134 to associate lp devices with, starting with
2135 lp0. A port specification may be 'none' to skip
2136 that lp device, or a parport name such as
2137 'parport0'. Specifying 'lp=auto' instead of a
2138 port specification list means that device IDs
2139 from each port should be examined, to see if
2140 an IEEE 1284-compliant printer is attached; if
2141 so, the driver will manage that printer.
2142 See also header of drivers/char/lp.c.
2145 Sets loops_per_jiffy to given constant, thus avoiding
2146 time-consuming boot-time autodetection (up to 250 ms per
2147 CPU). 0 enables autodetection (default). To determine
2148 the correct value for your kernel, boot with normal
2149 autodetection and see what value is printed. Note that
2150 on SMP systems the preset will be applied to all CPUs,
2151 which is likely to cause problems if your CPUs need
2152 significantly divergent settings. An incorrect value
2153 will cause delays in the kernel to be wrong, leading to
2154 unpredictable I/O errors and other breakage. Although
2155 unlikely, in the extreme case this might damage your
2159 Format: <io>,<irq>,<dma>
2161 machvec= [IA-64] Force the use of a particular machine-vector
2162 (machvec) in a generic kernel.
2163 Example: machvec=hpzx1_swiotlb
2165 machtype= [Loongson] Share the same kernel image file between different
2167 Example: machtype=lemote-yeeloong-2f-7inch
2169 max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater
2170 than or equal to this physical address is ignored.
2172 maxcpus= [SMP] Maximum number of processors that an SMP kernel
2173 should make use of. maxcpus=n : n >= 0 limits the
2174 kernel to using 'n' processors. n=0 is a special case,
2175 it is equivalent to "nosmp", which also disables
2178 max_loop= [LOOP] The number of loop block devices that get
2179 (loop.max_loop) unconditionally pre-created at init time. The default
2180 number is configured by BLK_DEV_LOOP_MIN_COUNT. Instead
2181 of statically allocating a predefined number, loop
2182 devices can be requested on-demand with the
2183 /dev/loop-control interface.
2185 mce [X86-32] Machine Check Exception
2187 mce=option [X86-64] See Documentation/x86/x86_64/boot-options.txt
2189 md= [HW] RAID subsystems devices and level
2190 See Documentation/md.txt.
2193 Format: <first>,<last>
2194 Specifies range of consoles to be captured by the MDA.
2196 mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory
2197 Amount of memory to be used when the kernel is not able
2198 to see the whole system memory or for test.
2199 [X86] Work as limiting max address. Use together
2200 with memmap= to avoid physical address space collisions.
2201 Without memmap= PCI devices could be placed at addresses
2202 belonging to unused RAM.
2204 mem=nopentium [BUGS=X86-32] Disable usage of 4MB pages for kernel
2208 [KNL,SH] Allow user to override the default size for
2209 per-device physically contiguous DMA buffers.
2211 memhp_default_state=online/offline
2212 [KNL] Set the initial state for the memory hotplug
2213 onlining policy. If not specified, the default value is
2214 set according to the
2215 CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config
2217 See Documentation/memory-hotplug.txt.
2219 memmap=exactmap [KNL,X86] Enable setting of an exact
2220 E820 memory map, as specified by the user.
2221 Such memmap=exactmap lines can be constructed based on
2222 BIOS output or other requirements. See the memmap=nn@ss
2225 memmap=nn[KMG]@ss[KMG]
2226 [KNL] Force usage of a specific region of memory.
2227 Region of memory to be used is from ss to ss+nn.
2229 memmap=nn[KMG]#ss[KMG]
2230 [KNL,ACPI] Mark specific memory as ACPI data.
2231 Region of memory to be marked is from ss to ss+nn.
2233 memmap=nn[KMG]$ss[KMG]
2234 [KNL,ACPI] Mark specific memory as reserved.
2235 Region of memory to be reserved is from ss to ss+nn.
2236 Example: Exclude memory from 0x18690000-0x1869ffff
2237 memmap=64K$0x18690000
2239 memmap=0x10000$0x18690000
2241 memmap=nn[KMG]!ss[KMG]
2242 [KNL,X86] Mark specific memory as protected.
2243 Region of memory to be used, from ss to ss+nn.
2244 The memory region may be marked as e820 type 12 (0xc)
2245 and is NVDIMM or ADR memory.
2247 memory_corruption_check=0/1 [X86]
2248 Some BIOSes seem to corrupt the first 64k of
2249 memory when doing things like suspend/resume.
2250 Setting this option will scan the memory
2251 looking for corruption. Enabling this will
2252 both detect corruption and prevent the kernel
2253 from using the memory being corrupted.
2254 However, its intended as a diagnostic tool; if
2255 repeatable BIOS-originated corruption always
2256 affects the same memory, you can use memmap=
2257 to prevent the kernel from using that memory.
2259 memory_corruption_check_size=size [X86]
2260 By default it checks for corruption in the low
2261 64k, making this memory unavailable for normal
2262 use. Use this parameter to scan for
2263 corruption in more or less memory.
2265 memory_corruption_check_period=seconds [X86]
2266 By default it checks for corruption every 60
2267 seconds. Use this parameter to check at some
2268 other rate. 0 disables periodic checking.
2270 memtest= [KNL,X86,ARM] Enable memtest
2272 default : 0 <disable>
2273 Specifies the number of memtest passes to be
2274 performed. Each pass selects another test
2275 pattern from a given set of patterns. Memtest
2276 fills the memory with this pattern, validates
2277 memory contents and reserves bad memory
2278 regions that are detected.
2280 meye.*= [HW] Set MotionEye Camera parameters
2281 See Documentation/video4linux/meye.txt.
2283 mfgpt_irq= [IA-32] Specify the IRQ to use for the
2284 Multi-Function General Purpose Timers on AMD Geode
2287 mfgptfix [X86-32] Fix MFGPT timers on AMD Geode platforms when
2288 the BIOS has incorrectly applied a workaround. TinyBIOS
2289 version 0.98 is known to be affected, 0.99 fixes the
2290 problem by letting the user disable the workaround.
2294 min_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory below this
2295 physical address is ignored.
2297 mini2440= [ARM,HW,KNL]
2298 Format:[0..2][b][c][t]
2300 MINI2440 configuration specification:
2301 0 - The attached screen is the 3.5" TFT
2302 1 - The attached screen is the 7" TFT
2303 2 - The VGA Shield is attached (1024x768)
2304 Leaving out the screen size parameter will not load
2305 the TFT driver, and the framebuffer will be left
2307 b - Enable backlight. The TFT backlight pin will be
2308 linked to the kernel VESA blanking code and a GPIO
2309 LED. This parameter is not necessary when using the
2311 c - Enable the s3c camera interface.
2312 t - Reserved for enabling touchscreen support. The
2313 touchscreen support is not enabled in the mainstream
2314 kernel as of 2.6.30, a preliminary port can be found
2315 in the "bleeding edge" mini2440 support kernel at
2316 http://repo.or.cz/w/linux-2.6/mini2440.git
2319 [KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
2320 parameter allows control of the logging verbosity for
2321 the additional memory initialisation checks. A value
2322 of 0 disables mminit logging and a level of 4 will
2323 log everything. Information is printed at KERN_DEBUG
2324 so loglevel=8 may also need to be specified.
2327 [KNL] When CONFIG_MODULE_SIG is set, this means that
2328 modules without (valid) signatures will fail to load.
2329 Note that if CONFIG_MODULE_SIG_FORCE is set, that
2330 is always true, so this option does nothing.
2332 module_blacklist= [KNL] Do not load a comma-separated list of
2333 modules. Useful for debugging problem modules.
2336 [MOUSE] Maximum time between finger touching and
2337 leaving touchpad surface for touch to be considered
2338 a tap and be reported as a left button click (for
2339 touchpads working in absolute mode only).
2341 mousedev.xres= [MOUSE] Horizontal screen resolution, used for devices
2342 reporting absolute coordinates, such as tablets
2343 mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
2344 reporting absolute coordinates, such as tablets
2346 movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
2347 is similar to kernelcore except it specifies the
2348 amount of memory used for migratable allocations.
2349 If both kernelcore and movablecore is specified,
2350 then kernelcore will be at *least* the specified
2351 value but may be more. If movablecore on its own
2352 is specified, the administrator must be careful
2353 that the amount of memory usable for all allocations
2356 movable_node [KNL,X86] Boot-time switch to enable the effects
2357 of CONFIG_MOVABLE_NODE=y. See mm/Kconfig for details.
2359 MTD_Partition= [MTD]
2360 Format: <name>,<region-number>,<size>,<offset>
2362 MTD_Region= [MTD] Format:
2363 <name>,<region-number>[,<base>,<size>,<buswidth>,<altbuswidth>]
2366 See drivers/mtd/cmdlinepart.c.
2368 multitce=off [PPC] This parameter disables the use of the pSeries
2369 firmware feature for updating multiple TCE entries
2372 onenand.bdry= [HW,MTD] Flex-OneNAND Boundary Configuration
2374 Format: [die0_boundary][,die0_lock][,die1_boundary][,die1_lock]
2376 boundary - index of last SLC block on Flex-OneNAND.
2377 The remaining blocks are configured as MLC blocks.
2378 lock - Configure if Flex-OneNAND boundary should be locked.
2379 Once locked, the boundary cannot be changed.
2380 1 indicates lock status, 0 indicates unlock status.
2383 ARM/S3C2412 JIVE boot control
2385 See arch/arm/mach-s3c2412/mach-jive.c
2387 mtouchusb.raw_coordinates=
2388 [HW] Make the MicroTouch USB driver use raw coordinates
2389 ('y', default) or cooked coordinates ('n')
2391 mtrr_chunk_size=nn[KMG] [X86]
2392 used for mtrr cleanup. It is largest continuous chunk
2393 that could hold holes aka. UC entries.
2395 mtrr_gran_size=nn[KMG] [X86]
2396 Used for mtrr cleanup. It is granularity of mtrr block.
2398 Large value could prevent small alignment from
2401 mtrr_spare_reg_nr=n [X86]
2403 Range: 0,7 : spare reg number
2405 Used for mtrr cleanup. It is spare mtrr entries number.
2406 Set to 2 or more if your graphical card needs more.
2408 n2= [NET] SDL Inc. RISCom/N2 synchronous serial card
2410 netdev= [NET] Network devices parameters
2411 Format: <irq>,<io>,<mem_start>,<mem_end>,<name>
2412 Note that mem_start is often overloaded to mean
2413 something different and driver-specific.
2414 This usage is only documented in each driver source
2418 [NETFILTER] Enable connection tracking flow accounting
2419 0 to disable accounting
2420 1 to enable accounting
2423 nfsaddrs= [NFS] Deprecated. Use ip= instead.
2424 See Documentation/filesystems/nfs/nfsroot.txt.
2426 nfsroot= [NFS] nfs root filesystem for disk-less boxes.
2427 See Documentation/filesystems/nfs/nfsroot.txt.
2429 nfsrootdebug [NFS] enable nfsroot debugging messages.
2430 See Documentation/filesystems/nfs/nfsroot.txt.
2432 nfs.callback_tcpport=
2433 [NFS] set the TCP port on which the NFSv4 callback
2434 channel should listen.
2437 [NFS] sets the pathname to the program which is used
2438 to update the NFS client cache entries.
2440 nfs.cache_getent_timeout=
2441 [NFS] sets the timeout after which an attempt to
2442 update a cache entry is deemed to have failed.
2444 nfs.idmap_cache_timeout=
2445 [NFS] set the maximum lifetime for idmapper cache
2449 [NFS] enable 64-bit inode numbers.
2450 If zero, the NFS client will fake up a 32-bit inode
2451 number for the readdir() and stat() syscalls instead
2452 of returning the full 64-bit number.
2453 The default is to return 64-bit inode numbers.
2455 nfs.max_session_slots=
2456 [NFSv4.1] Sets the maximum number of session slots
2457 the client will attempt to negotiate with the server.
2458 This limits the number of simultaneous RPC requests
2459 that the client can send to the NFSv4.1 server.
2460 Note that there is little point in setting this
2461 value higher than the max_tcp_slot_table_limit.
2463 nfs.nfs4_disable_idmapping=
2464 [NFSv4] When set to the default of '1', this option
2465 ensures that both the RPC level authentication
2466 scheme and the NFS level operations agree to use
2467 numeric uids/gids if the mount is using the
2468 'sec=sys' security flavour. In effect it is
2469 disabling idmapping, which can make migration from
2470 legacy NFSv2/v3 systems to NFSv4 easier.
2471 Servers that do not support this mode of operation
2472 will be autodetected by the client, and it will fall
2473 back to using the idmapper.
2474 To turn off this behaviour, set the value to '0'.
2476 [NFS4] Specify an additional fixed unique ident-
2477 ification string that NFSv4 clients can insert into
2478 their nfs_client_id4 string. This is typically a
2479 UUID that is generated at system install time.
2481 nfs.send_implementation_id =
2482 [NFSv4.1] Send client implementation identification
2483 information in exchange_id requests.
2484 If zero, no implementation identification information
2486 The default is to send the implementation identification
2489 nfs.recover_lost_locks =
2490 [NFSv4] Attempt to recover locks that were lost due
2491 to a lease timeout on the server. Please note that
2492 doing this risks data corruption, since there are
2493 no guarantees that the file will remain unchanged
2494 after the locks are lost.
2495 If you want to enable the kernel legacy behaviour of
2496 attempting to recover these locks, then set this
2498 The default parameter value of '0' causes the kernel
2499 not to attempt recovery of lost locks.
2501 nfs4.layoutstats_timer =
2502 [NFSv4.2] Change the rate at which the kernel sends
2503 layoutstats to the pNFS metadata server.
2505 Setting this to value to 0 causes the kernel to use
2506 whatever value is the default set by the layout
2507 driver. A non-zero value sets the minimum interval
2508 in seconds between layoutstats transmissions.
2510 nfsd.nfs4_disable_idmapping=
2511 [NFSv4] When set to the default of '1', the NFSv4
2512 server will return only numeric uids and gids to
2513 clients using auth_sys, and will accept numeric uids
2514 and gids from such clients. This is intended to ease
2515 migration from NFSv2/v3.
2517 objlayoutdriver.osd_login_prog=
2518 [NFS] [OBJLAYOUT] sets the pathname to the program which
2519 is used to automatically discover and login into new
2520 osd-targets. Please see:
2521 Documentation/filesystems/pnfs.txt for more explanations
2523 nmi_debug= [KNL,AVR32,SH] Specify one or more actions to take
2524 when a NMI is triggered.
2525 Format: [state][,regs][,debounce][,die]
2527 nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
2528 Format: [panic,][nopanic,][num]
2530 0 - turn hardlockup detector in nmi_watchdog off
2531 1 - turn hardlockup detector in nmi_watchdog on
2532 When panic is specified, panic when an NMI watchdog
2533 timeout occurs (or 'nopanic' to override the opposite
2534 default). To disable both hard and soft lockup detectors,
2535 please see 'nowatchdog'.
2536 This is useful when you use a panic=... timeout and
2537 need the box quickly up again.
2539 netpoll.carrier_timeout=
2540 [NET] Specifies amount of time (in seconds) that
2541 netpoll should wait for a carrier. By default netpoll
2544 no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
2545 emulation library even if a 387 maths coprocessor
2549 [HW] Never suspend the console
2550 Disable suspending of consoles during suspend and
2551 hibernate operations. Once disabled, debugging
2552 messages can reach various consoles while the rest
2553 of the system is being put to sleep (ie, while
2554 debugging driver suspend/resume hooks). This may
2555 not work reliably with all consoles, but is known
2556 to work with serial and VGA consoles.
2557 To facilitate more flexible debugging, we also add
2558 console_suspend, a printk module parameter to control
2559 it. Users could use console_suspend (usually
2560 /sys/module/printk/parameters/console_suspend) to
2561 turn on/off it dynamically.
2563 noaliencache [MM, NUMA, SLAB] Disables the allocation of alien
2564 caches in the slab allocator. Saves per-node memory,
2565 but will impact performance.
2569 noapic [SMP,APIC] Tells the kernel to not make use of any
2570 IOAPICs that may be present in the system.
2572 noautogroup Disable scheduler automatic task group creation.
2574 nobats [PPC] Do not use BATs for mapping kernel lowmem
2575 on "Classic" PPC cores.
2579 noclflush [BUGS=X86] Don't use the CLFLUSH instruction
2581 nodelayacct [KNL] Disable per-task delay accounting
2583 nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects.
2585 nodsp [SH] Disable hardware DSP at boot time.
2587 noefi Disable EFI runtime services support.
2592 On X86-32 available only on PAE configured kernels.
2593 noexec=on: enable non-executable mappings (default)
2594 noexec=off: disable non-executable mappings
2597 Disable SMAP (Supervisor Mode Access Prevention)
2598 even if it is supported by processor.
2601 Disable SMEP (Supervisor Mode Execution Prevention)
2602 even if it is supported by processor.
2605 This affects only 32-bit executables.
2606 noexec32=on: enable non-executable mappings (default)
2607 read doesn't imply executable mappings
2608 noexec32=off: disable non-executable mappings
2609 read implies executable mappings
2611 nofpu [MIPS,SH] Disable hardware FPU at boot time.
2613 nofxsr [BUGS=X86-32] Disables x86 floating point extended
2614 register save and restore. The kernel will only save
2615 legacy floating-point registers on task switch.
2617 nohugeiomap [KNL,x86] Disable kernel huge I/O mappings.
2619 nosmt [KNL,S390] Disable symmetric multithreading (SMT).
2620 Equivalent to smt=1.
2622 noxsave [BUGS=X86] Disables x86 extended register state save
2623 and restore using xsave. The kernel will fallback to
2624 enabling legacy floating-point and sse state.
2626 noxsaveopt [X86] Disables xsaveopt used in saving x86 extended
2627 register states. The kernel will fall back to use
2628 xsave to save the states. By using this parameter,
2629 performance of saving the states is degraded because
2630 xsave doesn't support modified optimization while
2631 xsaveopt supports it on xsaveopt enabled systems.
2633 noxsaves [X86] Disables xsaves and xrstors used in saving and
2634 restoring x86 extended register state in compacted
2635 form of xsave area. The kernel will fall back to use
2636 xsaveopt and xrstor to save and restore the states
2637 in standard form of xsave area. By using this
2638 parameter, xsave area per process might occupy more
2639 memory on xsaves enabled systems.
2641 nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
2642 wfi(ARM) instruction doesn't work correctly and not to
2643 use it. This is also useful when using JTAG debugger.
2645 no_file_caps Tells the kernel not to honor file capabilities. The
2646 only way then for a file to be executed with privilege
2647 is to be setuid root or executed by root.
2649 nohalt [IA-64] Tells the kernel not to use the power saving
2650 function PAL_HALT_LIGHT when idle. This increases
2651 power-consumption. On the positive side, it reduces
2652 interrupt wake-up latency, which may improve performance
2653 in certain environments such as networked servers or
2656 nohibernate [HIBERNATION] Disable hibernation and resume.
2658 nohz= [KNL] Boottime enable/disable dynamic ticks
2659 Valid arguments: on, off
2662 nohz_full= [KNL,BOOT]
2663 In kernels built with CONFIG_NO_HZ_FULL=y, set
2664 the specified list of CPUs whose tick will be stopped
2665 whenever possible. The boot CPU will be forced outside
2666 the range to maintain the timekeeping.
2667 The CPUs in this range must also be included in the
2670 noiotrap [SH] Disables trapped I/O port accesses.
2672 noirqdebug [X86-32] Disables the code which attempts to detect and
2673 disable unhandled interrupt sources.
2675 no_timer_check [X86,APIC] Disables the code which tests for
2676 broken timer IRQ sources.
2678 noisapnp [ISAPNP] Disables ISA PnP code.
2680 noinitrd [RAM] Tells the kernel not to load any configured
2683 nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
2685 [Deprecated - use intremap=off]
2689 noinvpcid [X86] Disable the INVPCID cpu feature.
2691 nojitter [IA-64] Disables jitter checking for ITC timers.
2693 no-kvmclock [X86,KVM] Disable paravirtualized KVM clock driver
2695 no-kvmapf [X86,KVM] Disable paravirtualized asynchronous page
2698 no-steal-acc [X86,KVM] Disable paravirtualized steal time accounting.
2699 steal time is computed, but won't influence scheduler
2702 nolapic [X86-32,APIC] Do not enable or use the local APIC.
2704 nolapic_timer [X86-32,APIC] Do not use the local APIC timer.
2706 noltlbs [PPC] Do not use large page/tlb entries for kernel
2707 lowmem mapping on PPC40x and PPC8xx
2709 nomca [IA-64] Disable machine check abort handling
2711 nomce [X86-32] Disable Machine Check Exception
2713 nomfgpt [X86-32] Disable Multi-Function General Purpose
2714 Timer usage (for AMD Geode machines).
2716 nonmi_ipi [X86] Disable using NMI IPIs during panic/reboot to
2717 shutdown the other cpus. Instead use the REBOOT_VECTOR
2720 nomodule Disable module load
2722 nopat [X86] Disable PAT (page attribute table extension of
2723 pagetables) support.
2725 norandmaps Don't use address space randomization. Equivalent to
2726 echo 0 > /proc/sys/kernel/randomize_va_space
2728 noreplace-paravirt [X86,IA-64,PV_OPS] Don't patch paravirt_ops
2730 noreplace-smp [X86-32,SMP] Don't replace SMP instructions
2731 with UP alternatives
2733 nordrand [X86] Disable kernel use of the RDRAND and
2734 RDSEED instructions even if they are supported
2735 by the processor. RDRAND and RDSEED are still
2736 available to user space applications.
2738 noresume [SWSUSP] Disables resume and restores original swap
2741 no-scroll [VGA] Disables scrollback.
2742 This is required for the Braillex ib80-piezo Braille
2743 reader made by F.H. Papenmeier (Germany).
2747 nosep [BUGS=X86-32] Disables x86 SYSENTER/SYSEXIT support.
2749 nosmp [SMP] Tells an SMP kernel to act as a UP kernel,
2750 and disable the IO APIC. legacy for "maxcpus=0".
2752 nosoftlockup [KNL] Disable the soft-lockup detector.
2754 nosync [HW,M68K] Disables sync negotiation for all devices.
2756 notsc [BUGS=X86-32] Disable Time Stamp Counter
2758 nowatchdog [KNL] Disable both lockup detectors, i.e.
2759 soft-lockup and NMI watchdog (hard-lockup).
2763 nox2apic [X86-64,APIC] Do not enable x2APIC mode.
2765 cpu0_hotplug [X86] Turn on CPU0 hotplug feature when
2766 CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
2767 Some features depend on CPU0. Known dependencies are:
2768 1. Resume from suspend/hibernate depends on CPU0.
2769 Suspend/hibernate will fail if CPU0 is offline and you
2770 need to online CPU0 before suspend/hibernate.
2771 2. PIC interrupts also depend on CPU0. CPU0 can't be
2772 removed if a PIC interrupt is detected.
2773 It's said poweroff/reboot may depend on CPU0 on some
2774 machines although I haven't seen such issues so far
2775 after CPU0 is offline on a few tested machines.
2776 If the dependencies are under your control, you can
2777 turn on cpu0_hotplug.
2779 nptcg= [IA-64] Override max number of concurrent global TLB
2780 purges which is reported from either PAL_VM_SUMMARY or
2783 nr_cpus= [SMP] Maximum number of processors that an SMP kernel
2784 could support. nr_cpus=n : n >= 1 limits the kernel to
2785 supporting 'n' processors. Later in runtime you can not
2786 use hotplug cpu feature to put more cpu back to online.
2787 just like you compile the kernel NR_CPUS=n
2789 nr_uarts= [SERIAL] maximum number of UARTs to be registered.
2791 numa_balancing= [KNL,X86] Enable or disable automatic NUMA balancing.
2792 Allowed values are enable and disable
2794 numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA.
2795 one of ['zone', 'node', 'default'] can be specified
2796 This can be set from sysctl after boot.
2797 See Documentation/sysctl/vm.txt for details.
2799 ohci1394_dma=early [HW] enable debugging via the ohci1394 driver.
2800 See Documentation/debugging-via-ohci1394.txt for more
2803 olpc_ec_timeout= [OLPC] ms delay when issuing EC commands
2804 Rather than timing out after 20 ms if an EC
2805 command is not properly ACKed, override the length
2806 of the timeout. We have interrupts disabled while
2807 waiting for the ACK, so if this is set too high
2808 interrupts *may* be lost!
2810 omap_mux= [OMAP] Override bootloader pin multiplexing.
2811 Format: <mux_mode0.mode_name=value>...
2812 For example, to override I2C bus2:
2813 omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
2815 oprofile.timer= [HW]
2816 Use timer interrupt instead of performance counters
2818 oprofile.cpu_type= Force an oprofile cpu type
2819 This might be useful if you have an older oprofile
2820 userland or if you want common events.
2821 Format: { arch_perfmon }
2822 arch_perfmon: [X86] Force use of architectural
2823 perfmon on Intel CPUs instead of the
2824 CPU specific event set.
2825 timer: [X86] Force use of architectural NMI
2826 timer mode (see also oprofile.timer
2827 for generic hr timer mode)
2829 oops=panic Always panic on oopses. Default is to just kill the
2830 process, but there is a small probability of
2831 deadlocking the machine.
2832 This will also cause panics on machine check exceptions.
2833 Useful together with panic=30 to trigger a reboot.
2836 See Documentation/sound/oss/oss-parameters.txt
2838 page_owner= [KNL] Boot-time page_owner enabling option.
2839 Storage of the information about who allocated
2840 each page is disabled in default. With this switch,
2842 on: enable the feature
2844 page_poison= [KNL] Boot-time parameter changing the state of
2845 poisoning on the buddy allocator.
2846 off: turn off poisoning
2847 on: turn on poisoning
2849 panic= [KNL] Kernel behaviour on panic: delay <timeout>
2850 timeout > 0: seconds before rebooting
2851 timeout = 0: wait forever
2852 timeout < 0: reboot immediately
2855 panic_on_warn panic() instead of WARN(). Useful to cause kdump
2858 crash_kexec_post_notifiers
2859 Run kdump after running panic-notifiers and dumping
2860 kmsg. This only for the users who doubt kdump always
2861 succeeds in any situation.
2862 Note that this also increases risks of kdump failure,
2863 because some panic notifiers can make the crashed
2864 kernel more unstable.
2866 parkbd.port= [HW] Parallel port number the keyboard adapter is
2867 connected to, default is 0.
2869 parkbd.mode= [HW] Parallel port keyboard adapter mode of operation,
2870 0 for XT, 1 for AT (default is AT).
2873 parport= [HW,PPT] Specify parallel ports. 0 disables.
2874 Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] }
2875 Use 'auto' to force the driver to use any
2876 IRQ/DMA settings detected (the default is to
2877 ignore detected IRQ/DMA settings because of
2878 possible conflicts). You can specify the base
2879 address, IRQ, and DMA settings; IRQ and DMA
2880 should be numbers, or 'auto' (for using detected
2881 settings on that particular port), or 'nofifo'
2882 (to avoid using a FIFO even if it is detected).
2883 Parallel ports are assigned in the order they
2884 are specified on the command line, starting
2887 parport_init_mode= [HW,PPT]
2888 Configure VIA parallel port to operate in
2889 a specific mode. This is necessary on Pegasos
2890 computer where firmware has no options for setting
2891 up parallel port mode and sets it to spp.
2892 Currently this function knows 686a and 8231 chips.
2893 Format: [spp|ps2|epp|ecp|ecpepp]
2896 Halt all CPUs after the first oops has been printed for
2897 the specified number of seconds. This is to be used if
2898 your oopses keep scrolling off the screen.
2903 See header of drivers/block/paride/pcd.c.
2904 See also Documentation/blockdev/paride.txt.
2906 pci=option[,option...] [PCI] various PCI subsystem options:
2907 earlydump [X86] dump PCI config space before the kernel
2909 off [X86] don't probe for the PCI bus
2910 bios [X86-32] force use of PCI BIOS, don't access
2911 the hardware directly. Use this if your machine
2912 has a non-standard PCI host bridge.
2913 nobios [X86-32] disallow use of PCI BIOS, only direct
2914 hardware access methods are allowed. Use this
2915 if you experience crashes upon bootup and you
2916 suspect they are caused by the BIOS.
2917 conf1 [X86] Force use of PCI Configuration Access
2918 Mechanism 1 (config address in IO port 0xCF8,
2919 data in IO port 0xCFC, both 32-bit).
2920 conf2 [X86] Force use of PCI Configuration Access
2921 Mechanism 2 (IO port 0xCF8 is an 8-bit port for
2922 the function, IO port 0xCFA, also 8-bit, sets
2923 bus number. The config space is then accessed
2924 through ports 0xC000-0xCFFF).
2925 See http://wiki.osdev.org/PCI for more info
2926 on the configuration access mechanisms.
2927 noaer [PCIE] If the PCIEAER kernel config parameter is
2928 enabled, this kernel boot option can be used to
2929 disable the use of PCIE advanced error reporting.
2930 nodomains [PCI] Disable support for multiple PCI
2931 root domains (aka PCI segments, in ACPI-speak).
2932 nommconf [X86] Disable use of MMCONFIG for PCI
2934 check_enable_amd_mmconf [X86] check for and enable
2935 properly configured MMIO access to PCI
2936 config space on AMD family 10h CPU
2937 nomsi [MSI] If the PCI_MSI kernel config parameter is
2938 enabled, this kernel boot option can be used to
2939 disable the use of MSI interrupts system-wide.
2940 noioapicquirk [APIC] Disable all boot interrupt quirks.
2941 Safety option to keep boot IRQs enabled. This
2942 should never be necessary.
2943 ioapicreroute [APIC] Enable rerouting of boot IRQs to the
2944 primary IO-APIC for bridges that cannot disable
2945 boot IRQs. This fixes a source of spurious IRQs
2946 when the system masks IRQs.
2947 noioapicreroute [APIC] Disable workaround that uses the
2948 boot IRQ equivalent of an IRQ that connects to
2949 a chipset where boot IRQs cannot be disabled.
2950 The opposite of ioapicreroute.
2951 biosirq [X86-32] Use PCI BIOS calls to get the interrupt
2952 routing table. These calls are known to be buggy
2953 on several machines and they hang the machine
2954 when used, but on other computers it's the only
2955 way to get the interrupt routing table. Try
2956 this option if the kernel is unable to allocate
2957 IRQs or discover secondary PCI buses on your
2959 rom [X86] Assign address space to expansion ROMs.
2960 Use with caution as certain devices share
2961 address decoders between ROMs and other
2963 norom [X86] Do not assign address space to
2964 expansion ROMs that do not already have
2965 BIOS assigned address ranges.
2966 nobar [X86] Do not assign address space to the
2967 BARs that weren't assigned by the BIOS.
2968 irqmask=0xMMMM [X86] Set a bit mask of IRQs allowed to be
2969 assigned automatically to PCI devices. You can
2970 make the kernel exclude IRQs of your ISA cards
2972 pirqaddr=0xAAAAA [X86] Specify the physical address
2973 of the PIRQ table (normally generated
2974 by the BIOS) if it is outside the
2975 F0000h-100000h range.
2976 lastbus=N [X86] Scan all buses thru bus #N. Can be
2977 useful if the kernel is unable to find your
2978 secondary buses and you want to tell it
2979 explicitly which ones they are.
2980 assign-busses [X86] Always assign all PCI bus
2981 numbers ourselves, overriding
2982 whatever the firmware may have done.
2983 usepirqmask [X86] Honor the possible IRQ mask stored
2984 in the BIOS $PIR table. This is needed on
2985 some systems with broken BIOSes, notably
2986 some HP Pavilion N5400 and Omnibook XE3
2987 notebooks. This will have no effect if ACPI
2988 IRQ routing is enabled.
2989 noacpi [X86] Do not use ACPI for IRQ routing
2990 or for PCI scanning.
2991 use_crs [X86] Use PCI host bridge window information
2992 from ACPI. On BIOSes from 2008 or later, this
2993 is enabled by default. If you need to use this,
2994 please report a bug.
2995 nocrs [X86] Ignore PCI host bridge windows from ACPI.
2996 If you need to use this, please report a bug.
2997 routeirq Do IRQ routing for all PCI devices.
2998 This is normally done in pci_enable_device(),
2999 so this option is a temporary workaround
3000 for broken drivers that don't call it.
3001 skip_isa_align [X86] do not align io start addr, so can
3002 handle more pci cards
3003 noearly [X86] Don't do any early type 1 scanning.
3004 This might help on some broken boards which
3005 machine check when some devices' config space
3006 is read. But various workarounds are disabled
3007 and some IOMMU drivers will not work.
3008 bfsort Sort PCI devices into breadth-first order.
3009 This sorting is done to get a device
3010 order compatible with older (<= 2.4) kernels.
3011 nobfsort Don't sort PCI devices into breadth-first order.
3012 pcie_bus_tune_off Disable PCIe MPS (Max Payload Size)
3013 tuning and use the BIOS-configured MPS defaults.
3014 pcie_bus_safe Set every device's MPS to the largest value
3015 supported by all devices below the root complex.
3016 pcie_bus_perf Set device MPS to the largest allowable MPS
3017 based on its parent bus. Also set MRRS (Max
3018 Read Request Size) to the largest supported
3019 value (no larger than the MPS that the device
3020 or bus can support) for best performance.
3021 pcie_bus_peer2peer Set every device's MPS to 128B, which
3022 every device is guaranteed to support. This
3023 configuration allows peer-to-peer DMA between
3024 any pair of devices, possibly at the cost of
3025 reduced performance. This also guarantees
3026 that hot-added devices will work.
3027 cbiosize=nn[KMG] The fixed amount of bus space which is
3028 reserved for the CardBus bridge's IO window.
3029 The default value is 256 bytes.
3030 cbmemsize=nn[KMG] The fixed amount of bus space which is
3031 reserved for the CardBus bridge's memory
3032 window. The default value is 64 megabytes.
3035 [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
3036 [<order of align>@]pci:<vendor>:<device>\
3037 [:<subvendor>:<subdevice>][; ...]
3038 Specifies alignment and device to reassign
3039 aligned memory resources.
3040 If <order of align> is not specified,
3041 PAGE_SIZE is used as alignment.
3042 PCI-PCI bridge can be specified, if resource
3043 windows need to be expanded.
3044 To specify the alignment for several
3045 instances of a device, the PCI vendor,
3046 device, subvendor, and subdevice may be
3047 specified, e.g., 4096@pci:8086:9c22:103c:198f
3048 ecrc= Enable/disable PCIe ECRC (transaction layer
3049 end-to-end CRC checking).
3050 bios: Use BIOS/firmware settings. This is the
3054 hpiosize=nn[KMG] The fixed amount of bus space which is
3055 reserved for hotplug bridge's IO window.
3056 Default size is 256 bytes.
3057 hpmemsize=nn[KMG] The fixed amount of bus space which is
3058 reserved for hotplug bridge's memory window.
3059 Default size is 2 megabytes.
3060 hpbussize=nn The minimum amount of additional bus numbers
3061 reserved for buses below a hotplug bridge.
3063 realloc= Enable/disable reallocating PCI bridge resources
3064 if allocations done by BIOS are too small to
3065 accommodate resources required by all child
3067 off: Turn realloc off
3069 realloc same as realloc=on
3070 noari do not use PCIe ARI.
3071 pcie_scan_all Scan all possible PCIe devices. Otherwise we
3072 only look for one device below a PCIe downstream
3075 pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
3078 force Enable ASPM even on devices that claim not to support it.
3079 WARNING: Forcing ASPM on may cause system lockups.
3081 pcie_hp= [PCIE] PCI Express Hotplug driver options:
3082 nomsi Do not use MSI for PCI Express Native Hotplug (this
3083 makes all PCIe ports use INTx for hotplug services).
3085 pcie_ports= [PCIE] PCIe ports handling:
3086 auto Ask the BIOS whether or not to use native PCIe services
3087 associated with PCIe ports (PME, hot-plug, AER). Use
3088 them only if that is allowed by the BIOS.
3089 native Use native PCIe services associated with PCIe ports
3091 compat Treat PCIe ports as PCI-to-PCI bridges, disable the PCIe
3094 pcie_port_pm= [PCIE] PCIe port power management handling:
3095 off Disable power management of all PCIe ports
3096 force Forcibly enable power management of all PCIe ports
3098 pcie_pme= [PCIE,PM] Native PCIe PME signaling options:
3099 nomsi Do not use MSI for native PCIe PME signaling (this makes
3100 all PCIe root ports use INTx for all services).
3102 pcmv= [HW,PCMCIA] BadgePAD 4
3106 Keep all power-domains already enabled by bootloader on,
3107 even if no driver has claimed them. This is useful
3108 for debug and development, but should not be
3109 needed on a platform with proper driver support.
3112 See Documentation/blockdev/paride.txt.
3114 pdcchassis= [PARISC,HW] Disable/Enable PDC Chassis Status codes at
3117 See arch/parisc/kernel/pdc_chassis.c
3119 percpu_alloc= Select which percpu first chunk allocator to use.
3120 Currently supported values are "embed" and "page".
3121 Archs may support subset or none of the selections.
3122 See comments in mm/percpu.c for details on each
3123 allocator. This parameter is primarily for debugging
3124 and performance comparison.
3127 See Documentation/blockdev/paride.txt.
3130 See Documentation/blockdev/paride.txt.
3132 pirq= [SMP,APIC] Manual mp-table setup
3133 See Documentation/x86/i386/IO-APIC.txt.
3135 plip= [PPT,NET] Parallel port network link
3136 Format: { parport<nr> | timid | 0 }
3137 See also Documentation/parport.txt.
3139 pmtmr= [X86] Manual setup of pmtmr I/O Port.
3140 Override pmtimer IOPort with a hex value.
3144 Enable PNP debug messages (depends on the
3145 CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time
3146 via /sys/module/pnp/parameters/debug. We always show
3147 current resource usage; turning this on also shows
3148 possible settings and some assignment information.
3154 { on | off | curr | res | no-curr | no-res }
3157 [ISAPNP] Exclude IRQs for the autoconfiguration
3160 [ISAPNP] Exclude DMAs for the autoconfiguration
3162 pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration
3163 Ranges are in pairs (I/O port base and size).
3166 [ISAPNP] Exclude memory regions for the
3168 Ranges are in pairs (memory base and size).
3170 ports= [IP_VS_FTP] IPVS ftp helper module
3172 Up to 8 (IP_VS_APP_MAX_PORTS) ports
3174 Format: <port>,<port>....
3176 ppc_strict_facility_enable
3177 [PPC] This option catches any kernel floating point,
3178 Altivec, VSX and SPE outside of regions specifically
3179 allowed (eg kernel_enable_fpu()/kernel_disable_fpu()).
3180 There is some performance impact when enabling this.
3182 print-fatal-signals=
3183 [KNL] debug: print fatal signals
3185 If enabled, warn about various signal handling
3186 related application anomalies: too many signals,
3187 too many POSIX.1 timers, fatal signals causing a
3190 If you hit the warning due to signal overflow,
3191 you might want to try "ulimit -i unlimited".
3195 printk.always_kmsg_dump=
3196 Trigger kmsg_dump for cases other than kernel oops or
3198 Format: <bool> (1/Y/y=enable, 0/N/n=disable)
3201 printk.devkmsg={on,off,ratelimit}
3202 Control writing to /dev/kmsg.
3203 on - unlimited logging to /dev/kmsg from userspace
3204 off - logging to /dev/kmsg disabled
3205 ratelimit - ratelimit the logging
3208 printk.time= Show timing data prefixed to each printk message line
3209 Format: <bool> (1/Y/y=enable, 0/N/n=disable)
3211 processor.max_cstate= [HW,ACPI]
3212 Limit processor to maximum C-state
3213 max_cstate=9 overrides any DMI blacklist limit.
3215 processor.nocst [HW,ACPI]
3216 Ignore the _CST method to determine C-states,
3217 instead using the legacy FADT method
3219 profile= [KNL] Enable kernel profiling via /proc/profile
3220 Format: [schedule,]<number>
3221 Param: "schedule" - profile schedule points.
3222 Param: <number> - step/bucket size as a power of 2 for
3223 statistical time based profiling.
3224 Param: "sleep" - profile D-state sleeping (millisecs).
3225 Requires CONFIG_SCHEDSTATS
3226 Param: "kvm" - profile VM exits.
3228 prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk
3230 See Documentation/blockdev/ramdisk.txt.
3232 psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to
3233 probe for; one of (bare|imps|exps|lifebook|any).
3234 psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports
3236 psmouse.resetafter= [HW,MOUSE]
3237 Try to reset the device after so many bad packets
3240 [HW,MOUSE] Set desired mouse resolution, in dpi.
3241 psmouse.smartscroll=
3242 [HW,MOUSE] Controls Logitech smartscroll autorepeat.
3243 0 = disabled, 1 = enabled (default).
3245 pstore.backend= Specify the name of the pstore backend to use
3248 See Documentation/blockdev/paride.txt.
3251 [KNL] Number of legacy pty's. Overwrites compiled-in
3254 quiet [KNL] Disable most log messages
3259 See Documentation/md.txt.
3261 ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
3262 See Documentation/blockdev/ramdisk.txt.
3265 In kernels built with CONFIG_RCU_NOCB_CPU=y, set
3266 the specified list of CPUs to be no-callback CPUs.
3267 Invocation of these CPUs' RCU callbacks will
3268 be offloaded to "rcuox/N" kthreads created for
3269 that purpose, where "x" is "b" for RCU-bh, "p"
3270 for RCU-preempt, and "s" for RCU-sched, and "N"
3271 is the CPU number. This reduces OS jitter on the
3272 offloaded CPUs, which can be useful for HPC and
3273 real-time workloads. It can also improve energy
3274 efficiency for asymmetric multiprocessors.
3277 Rather than requiring that offloaded CPUs
3278 (specified by rcu_nocbs= above) explicitly
3279 awaken the corresponding "rcuoN" kthreads,
3280 make these kthreads poll for callbacks.
3281 This improves the real-time response for the
3282 offloaded CPUs by relieving them of the need to
3283 wake up the corresponding kthread, but degrades
3284 energy efficiency by requiring that the kthreads
3285 periodically wake up to do the polling.
3287 rcutree.blimit= [KNL]
3288 Set maximum number of finished RCU callbacks to
3289 process in one batch.
3291 rcutree.dump_tree= [KNL]
3292 Dump the structure of the rcu_node combining tree
3293 out at early boot. This is used for diagnostic
3294 purposes, to verify correct tree setup.
3296 rcutree.gp_cleanup_delay= [KNL]
3297 Set the number of jiffies to delay each step of
3298 RCU grace-period cleanup. This only has effect
3299 when CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is set.
3301 rcutree.gp_init_delay= [KNL]
3302 Set the number of jiffies to delay each step of
3303 RCU grace-period initialization. This only has
3304 effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT
3307 rcutree.gp_preinit_delay= [KNL]
3308 Set the number of jiffies to delay each step of
3309 RCU grace-period pre-initialization, that is,
3310 the propagation of recent CPU-hotplug changes up
3311 the rcu_node combining tree. This only has effect
3312 when CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is set.
3314 rcutree.rcu_fanout_exact= [KNL]
3315 Disable autobalancing of the rcu_node combining
3316 tree. This is used by rcutorture, and might
3317 possibly be useful for architectures having high
3318 cache-to-cache transfer latencies.
3320 rcutree.rcu_fanout_leaf= [KNL]
3321 Change the number of CPUs assigned to each
3322 leaf rcu_node structure. Useful for very
3323 large systems, which will choose the value 64,
3324 and for NUMA systems with large remote-access
3325 latencies, which will choose a value aligned
3326 with the appropriate hardware boundaries.
3328 rcutree.jiffies_till_sched_qs= [KNL]
3329 Set required age in jiffies for a
3330 given grace period before RCU starts
3331 soliciting quiescent-state help from
3332 rcu_note_context_switch().
3334 rcutree.jiffies_till_first_fqs= [KNL]
3335 Set delay from grace-period initialization to
3336 first attempt to force quiescent states.
3337 Units are jiffies, minimum value is zero,
3338 and maximum value is HZ.
3340 rcutree.jiffies_till_next_fqs= [KNL]
3341 Set delay between subsequent attempts to force
3342 quiescent states. Units are jiffies, minimum
3343 value is one, and maximum value is HZ.
3345 rcutree.kthread_prio= [KNL,BOOT]
3346 Set the SCHED_FIFO priority of the RCU per-CPU
3347 kthreads (rcuc/N). This value is also used for
3348 the priority of the RCU boost threads (rcub/N)
3349 and for the RCU grace-period kthreads (rcu_bh,
3350 rcu_preempt, and rcu_sched). If RCU_BOOST is
3351 set, valid values are 1-99 and the default is 1
3352 (the least-favored priority). Otherwise, when
3353 RCU_BOOST is not set, valid values are 0-99 and
3354 the default is zero (non-realtime operation).
3356 rcutree.rcu_nocb_leader_stride= [KNL]
3357 Set the number of NOCB kthread groups, which
3358 defaults to the square root of the number of
3359 CPUs. Larger numbers reduces the wakeup overhead
3360 on the per-CPU grace-period kthreads, but increases
3361 that same overhead on each group's leader.
3363 rcutree.qhimark= [KNL]
3364 Set threshold of queued RCU callbacks beyond which
3365 batch limiting is disabled.
3367 rcutree.qlowmark= [KNL]
3368 Set threshold of queued RCU callbacks below which
3369 batch limiting is re-enabled.
3371 rcutree.rcu_idle_gp_delay= [KNL]
3372 Set wakeup interval for idle CPUs that have
3373 RCU callbacks (RCU_FAST_NO_HZ=y).
3375 rcutree.rcu_idle_lazy_gp_delay= [KNL]
3376 Set wakeup interval for idle CPUs that have
3377 only "lazy" RCU callbacks (RCU_FAST_NO_HZ=y).
3378 Lazy RCU callbacks are those which RCU can
3379 prove do nothing more than free memory.
3381 rcuperf.gp_exp= [KNL]
3382 Measure performance of expedited synchronous
3383 grace-period primitives.
3385 rcuperf.holdoff= [KNL]
3386 Set test-start holdoff period. The purpose of
3387 this parameter is to delay the start of the
3388 test until boot completes in order to avoid
3391 rcuperf.nreaders= [KNL]
3392 Set number of RCU readers. The value -1 selects
3393 N, where N is the number of CPUs. A value
3394 "n" less than -1 selects N-n+1, where N is again
3395 the number of CPUs. For example, -2 selects N
3396 (the number of CPUs), -3 selects N+1, and so on.
3397 A value of "n" less than or equal to -N selects
3400 rcuperf.nwriters= [KNL]
3401 Set number of RCU writers. The values operate
3402 the same as for rcuperf.nreaders.
3403 N, where N is the number of CPUs
3405 rcuperf.perf_runnable= [BOOT]
3406 Start rcuperf running at boot time.
3408 rcuperf.shutdown= [KNL]
3409 Shut the system down after performance tests
3410 complete. This is useful for hands-off automated
3413 rcuperf.perf_type= [KNL]
3414 Specify the RCU implementation to test.
3416 rcuperf.verbose= [KNL]
3417 Enable additional printk() statements.
3419 rcutorture.cbflood_inter_holdoff= [KNL]
3420 Set holdoff time (jiffies) between successive
3421 callback-flood tests.
3423 rcutorture.cbflood_intra_holdoff= [KNL]
3424 Set holdoff time (jiffies) between successive
3425 bursts of callbacks within a given callback-flood
3428 rcutorture.cbflood_n_burst= [KNL]
3429 Set the number of bursts making up a given
3430 callback-flood test. Set this to zero to
3431 disable callback-flood testing.
3433 rcutorture.cbflood_n_per_burst= [KNL]
3434 Set the number of callbacks to be registered
3435 in a given burst of a callback-flood test.
3437 rcutorture.fqs_duration= [KNL]
3438 Set duration of force_quiescent_state bursts
3441 rcutorture.fqs_holdoff= [KNL]
3442 Set holdoff time within force_quiescent_state bursts
3445 rcutorture.fqs_stutter= [KNL]
3446 Set wait time between force_quiescent_state bursts
3449 rcutorture.gp_cond= [KNL]
3450 Use conditional/asynchronous update-side
3451 primitives, if available.
3453 rcutorture.gp_exp= [KNL]
3454 Use expedited update-side primitives, if available.
3456 rcutorture.gp_normal= [KNL]
3457 Use normal (non-expedited) asynchronous
3458 update-side primitives, if available.
3460 rcutorture.gp_sync= [KNL]
3461 Use normal (non-expedited) synchronous
3462 update-side primitives, if available. If all
3463 of rcutorture.gp_cond=, rcutorture.gp_exp=,
3464 rcutorture.gp_normal=, and rcutorture.gp_sync=
3465 are zero, rcutorture acts as if is interpreted
3466 they are all non-zero.
3468 rcutorture.n_barrier_cbs= [KNL]
3469 Set callbacks/threads for rcu_barrier() testing.
3471 rcutorture.nfakewriters= [KNL]
3472 Set number of concurrent RCU writers. These just
3473 stress RCU, they don't participate in the actual
3474 test, hence the "fake".
3476 rcutorture.nreaders= [KNL]
3477 Set number of RCU readers. The value -1 selects
3478 N-1, where N is the number of CPUs. A value
3479 "n" less than -1 selects N-n-2, where N is again
3480 the number of CPUs. For example, -2 selects N
3481 (the number of CPUs), -3 selects N+1, and so on.
3483 rcutorture.object_debug= [KNL]
3484 Enable debug-object double-call_rcu() testing.
3486 rcutorture.onoff_holdoff= [KNL]
3487 Set time (s) after boot for CPU-hotplug testing.
3489 rcutorture.onoff_interval= [KNL]
3490 Set time (s) between CPU-hotplug operations, or
3491 zero to disable CPU-hotplug testing.
3493 rcutorture.shuffle_interval= [KNL]
3494 Set task-shuffle interval (s). Shuffling tasks
3495 allows some CPUs to go into dyntick-idle mode
3496 during the rcutorture test.
3498 rcutorture.shutdown_secs= [KNL]
3499 Set time (s) after boot system shutdown. This
3500 is useful for hands-off automated testing.
3502 rcutorture.stall_cpu= [KNL]
3503 Duration of CPU stall (s) to test RCU CPU stall
3504 warnings, zero to disable.
3506 rcutorture.stall_cpu_holdoff= [KNL]
3507 Time to wait (s) after boot before inducing stall.
3509 rcutorture.stat_interval= [KNL]
3510 Time (s) between statistics printk()s.
3512 rcutorture.stutter= [KNL]
3513 Time (s) to stutter testing, for example, specifying
3514 five seconds causes the test to run for five seconds,
3515 wait for five seconds, and so on. This tests RCU's
3516 ability to transition abruptly to and from idle.
3518 rcutorture.test_boost= [KNL]
3519 Test RCU priority boosting? 0=no, 1=maybe, 2=yes.
3520 "Maybe" means test if the RCU implementation
3521 under test support RCU priority boosting.
3523 rcutorture.test_boost_duration= [KNL]
3524 Duration (s) of each individual boost test.
3526 rcutorture.test_boost_interval= [KNL]
3527 Interval (s) between each boost test.
3529 rcutorture.test_no_idle_hz= [KNL]
3530 Test RCU's dyntick-idle handling. See also the
3531 rcutorture.shuffle_interval parameter.
3533 rcutorture.torture_runnable= [BOOT]
3534 Start rcutorture running at boot time.
3536 rcutorture.torture_type= [KNL]
3537 Specify the RCU implementation to test.
3539 rcutorture.verbose= [KNL]
3540 Enable additional printk() statements.
3542 rcupdate.rcu_cpu_stall_suppress= [KNL]
3543 Suppress RCU CPU stall warning messages.
3545 rcupdate.rcu_cpu_stall_timeout= [KNL]
3546 Set timeout for RCU CPU stall warning messages.
3548 rcupdate.rcu_expedited= [KNL]
3549 Use expedited grace-period primitives, for
3550 example, synchronize_rcu_expedited() instead
3551 of synchronize_rcu(). This reduces latency,
3552 but can increase CPU utilization, degrade
3553 real-time latency, and degrade energy efficiency.
3554 No effect on CONFIG_TINY_RCU kernels.
3556 rcupdate.rcu_normal= [KNL]
3557 Use only normal grace-period primitives,
3558 for example, synchronize_rcu() instead of
3559 synchronize_rcu_expedited(). This improves
3560 real-time latency, CPU utilization, and
3561 energy efficiency, but can expose users to
3562 increased grace-period latency. This parameter
3563 overrides rcupdate.rcu_expedited. No effect on
3564 CONFIG_TINY_RCU kernels.
3566 rcupdate.rcu_normal_after_boot= [KNL]
3567 Once boot has completed (that is, after
3568 rcu_end_inkernel_boot() has been invoked), use
3569 only normal grace-period primitives. No effect
3570 on CONFIG_TINY_RCU kernels.
3572 rcupdate.rcu_task_stall_timeout= [KNL]
3573 Set timeout in jiffies for RCU task stall warning
3574 messages. Disable with a value less than or equal
3577 rcupdate.rcu_self_test= [KNL]
3578 Run the RCU early boot self tests
3580 rcupdate.rcu_self_test_bh= [KNL]
3581 Run the RCU bh early boot self tests
3583 rcupdate.rcu_self_test_sched= [KNL]
3584 Run the RCU sched early boot self tests
3588 Run specified binary instead of /init from the ramdisk,
3589 used for early userspace startup. See initrd.
3592 Format (x86 or x86_64):
3593 [w[arm] | c[old] | h[ard] | s[oft] | g[pio]] \
3595 [[,]b[ios] | a[cpi] | k[bd] | t[riple] | e[fi] | p[ci]] \
3597 Where reboot_mode is one of warm (soft) or cold (hard) or gpio,
3598 reboot_type is one of bios, acpi, kbd, triple, efi, or pci,
3599 reboot_force is either force or not specified,
3600 reboot_cpu is s[mp]#### with #### being the processor
3601 to be used for rebooting.
3604 [KNL, SMP] Set scheduler's default relax_domain_level.
3605 See Documentation/cgroup-v1/cpusets.txt.
3607 relative_sleep_states=
3608 [SUSPEND] Use sleep state labeling where the deepest
3609 state available other than hibernation is always "mem".
3610 Format: { "0" | "1" }
3611 0 -- Traditional sleep state labels.
3612 1 -- Relative sleep state labels.
3614 reserve= [KNL,BUGS] Force the kernel to ignore some iomem area
3616 reservetop= [X86-32]
3618 Reserves a hole at the top of the kernel virtual
3623 Set the amount of memory to reserve for BIOS at
3624 the bottom of the address space.
3626 reset_devices [KNL] Force drivers to reset the underlying device
3627 during initialization.
3630 Specify the partition device for software suspend
3632 {/dev/<dev> | PARTUUID=<uuid> | <int>:<int> | <hex>}
3634 resume_offset= [SWSUSP]
3635 Specify the offset from the beginning of the partition
3636 given by "resume=" at which the swap header is located,
3637 in <PAGE_SIZE> units (needed only for swap files).
3638 See Documentation/power/swsusp-and-swap-files.txt
3640 resumedelay= [HIBERNATION] Delay (in seconds) to pause before attempting to
3641 read the resume files
3643 resumewait [HIBERNATION] Wait (indefinitely) for resume device to show up.
3644 Useful for devices that are detected asynchronously
3645 (e.g. USB and MMC devices).
3647 hibernate= [HIBERNATION]
3648 noresume Don't check if there's a hibernation image
3649 present during boot.
3650 nocompress Don't compress/decompress hibernation images.
3651 no Disable hibernation and resume.
3652 protect_image Turn on image protection during restoration
3653 (that will set all pages holding image data
3654 during restoration read-only).
3656 retain_initrd [RAM] Keep initrd memory after extraction
3658 rfkill.default_state=
3659 0 "airplane mode". All wifi, bluetooth, wimax, gps, fm,
3660 etc. communication is blocked by default.
3663 rfkill.master_switch_mode=
3664 0 The "airplane mode" button does nothing.
3665 1 The "airplane mode" button toggles between everything
3666 blocked and the previous configuration.
3667 2 The "airplane mode" button toggles between everything
3668 blocked and everything unblocked.
3670 rhash_entries= [KNL,NET]
3671 Set number of hash buckets for route cache
3673 ro [KNL] Mount root device read-only on boot
3676 on Mark read-only kernel memory as read-only (default).
3677 off Leave read-only kernel memory writable for debugging.
3680 Enable the uart passthrough on the designated usb port
3681 on Rockchip SoCs. When active, the signals of the
3682 debug-uart get routed to the D+ and D- pins of the usb
3683 port and the regular usb controller gets disabled.
3685 root= [KNL] Root filesystem
3686 See name_to_dev_t comment in init/do_mounts.c.
3688 rootdelay= [KNL] Delay (in seconds) to pause before attempting to
3689 mount the root filesystem
3691 rootflags= [KNL] Set root filesystem mount option string
3693 rootfstype= [KNL] Set root filesystem type
3695 rootwait [KNL] Wait (indefinitely) for root device to show up.
3696 Useful for devices that are detected asynchronously
3697 (e.g. USB and MMC devices).
3699 rproc_mem=nn[KMG][@address]
3700 [KNL,ARM,CMA] Remoteproc physical memory block.
3701 Memory area to be used by remote processor image,
3704 rw [KNL] Mount root device read-write on boot
3706 S [KNL] Run init in single mode
3708 s390_iommu= [HW,S390]
3709 Set s390 IOTLB flushing mode
3711 With strict flushing every unmap operation will result in
3712 an IOTLB flush. Default is lazy flushing before reuse,
3716 See drivers/net/irda/sa1100_ir.c.
3718 sbni= [NET] Granch SBNI12 leased line adapter
3720 sched_debug [KNL] Enables verbose scheduler debug messages.
3722 schedstats= [KNL,X86] Enable or disable scheduled statistics.
3723 Allowed values are enable and disable. This feature
3724 incurs a small amount of overhead in the scheduler
3725 but is useful for debugging and performance tuning.
3727 skew_tick= [KNL] Offset the periodic timer tick per cpu to mitigate
3728 xtime_lock contention on larger systems, and/or RCU lock
3729 contention on all systems with CONFIG_MAXSMP set.
3730 Format: { "0" | "1" }
3731 0 -- disable. (may be 1 via CONFIG_CMDLINE="skew_tick=1"
3733 Note: increases power consumption, thus should only be
3734 enabled if running jitter sensitive (HPC/RT) workloads.
3736 security= [SECURITY] Choose a security module to enable at boot.
3737 If this boot parameter is not specified, only the first
3738 security module asking for security registration will be
3739 loaded. An invalid security module name will be treated
3740 as if no module has been chosen.
3742 selinux= [SELINUX] Disable or enable SELinux at boot time.
3743 Format: { "0" | "1" }
3744 See security/selinux/Kconfig help text.
3747 Default value is set via kernel config option.
3748 If enabled at boot time, /selinux/disable can be used
3749 later to disable prior to initial policy load.
3751 apparmor= [APPARMOR] Disable or enable AppArmor at boot time
3752 Format: { "0" | "1" }
3753 See security/apparmor/Kconfig help text
3756 Default value is set via kernel config option.
3758 serialnumber [BUGS=X86-32]
3761 Maximal number of shapers.
3763 show_msr= [x86] show boot-time MSR settings
3764 Format: { <integer> }
3765 Show boot-time (BIOS-initialized) MSR settings.
3766 The parameter means the number of CPUs to show,
3767 for example 1 means boot CPU only.
3775 Disable merging of slabs with similar size. May be
3776 necessary if there is some reason to distinguish
3777 allocs to different slabs. Debug options disable
3778 merging on their own.
3779 For more information see Documentation/vm/slub.txt.
3781 slab_max_order= [MM, SLAB]
3782 Determines the maximum allowed order for slabs.
3783 A high setting may cause OOMs due to memory
3784 fragmentation. Defaults to 1 for systems with
3785 more than 32MB of RAM, 0 otherwise.
3787 slub_debug[=options[,slabs]] [MM, SLUB]
3788 Enabling slub_debug allows one to determine the
3789 culprit if slab objects become corrupted. Enabling
3790 slub_debug can create guard zones around objects and
3791 may poison objects when not in use. Also tracks the
3792 last alloc / free. For more information see
3793 Documentation/vm/slub.txt.
3795 slub_max_order= [MM, SLUB]
3796 Determines the maximum allowed order for slabs.
3797 A high setting may cause OOMs due to memory
3798 fragmentation. For more information see
3799 Documentation/vm/slub.txt.
3801 slub_min_objects= [MM, SLUB]
3802 The minimum number of objects per slab. SLUB will
3803 increase the slab order up to slub_max_order to
3804 generate a sufficiently large slab able to contain
3805 the number of objects indicated. The higher the number
3806 of objects the smaller the overhead of tracking slabs
3807 and the less frequently locks need to be acquired.
3808 For more information see Documentation/vm/slub.txt.
3810 slub_min_order= [MM, SLUB]
3811 Determines the minimum page order for slabs. Must be
3812 lower than slub_max_order.
3813 For more information see Documentation/vm/slub.txt.
3815 slub_nomerge [MM, SLUB]
3816 Same with slab_nomerge. This is supported for legacy.
3817 See slab_nomerge for more information.
3820 Format: <io1>[,<io2>[,...,<io8>]]
3822 smsc-ircc2.nopnp [HW] Don't use PNP to discover SMC devices
3823 smsc-ircc2.ircc_cfg= [HW] Device configuration I/O port
3824 smsc-ircc2.ircc_sir= [HW] SIR base I/O port
3825 smsc-ircc2.ircc_fir= [HW] FIR base I/O port
3826 smsc-ircc2.ircc_irq= [HW] IRQ line
3827 smsc-ircc2.ircc_dma= [HW] DMA channel
3828 smsc-ircc2.ircc_transceiver= [HW] Transceiver type:
3829 0: Toshiba Satellite 1800 (GP data pin select)
3830 1: Fast pin select (default)
3833 smt [KNL,S390] Set the maximum number of threads (logical
3834 CPUs) to use per physical CPU on systems capable of
3835 symmetric multithreading (SMT). Will be capped to the
3836 actual hardware limit.
3838 Default: -1 (no limit)
3841 [KNL] Should the soft-lockup detector generate panics.
3844 softlockup_all_cpu_backtrace=
3845 [KNL] Should the soft-lockup detector generate
3846 backtraces on all cpus.
3849 sonypi.*= [HW] Sony Programmable I/O Control Device driver
3850 See Documentation/laptops/sonypi.txt
3852 spia_io_base= [HW,MTD]
3858 Enabled the stack tracer on boot up.
3860 stacktrace_filter=[function-list]
3861 [FTRACE] Limit the functions that the stack tracer
3862 will trace at boot up. function-list is a comma separated
3863 list of functions. This list can be changed at run
3864 time by the stack_trace_filter file in the debugfs
3865 tracing directory. Note, this enables stack tracing
3866 and the stacktrace above is not needed.
3870 Set the STI (builtin display/keyboard on the HP-PARISC
3871 machines) console (graphic card) which should be used
3872 as the initial boot-console.
3873 See also comment in drivers/video/console/sticore.c.
3876 See comment in drivers/video/console/sticore.c.
3879 Format: bpp:<bpp1>[:<bpp2>[:<bpp3>...]]
3881 sunrpc.min_resvport=
3882 sunrpc.max_resvport=
3884 SunRPC servers often require that client requests
3885 originate from a privileged port (i.e. a port in the
3886 range 0 < portnr < 1024).
3887 An administrator who wishes to reserve some of these
3888 ports for other uses may adjust the range that the
3889 kernel's sunrpc client considers to be privileged
3890 using these two parameters to set the minimum and
3891 maximum port values.
3893 sunrpc.svc_rpc_per_connection_limit=
3895 Limit the number of requests that the server will
3896 process in parallel from a single connection.
3897 The default value is 0 (no limit).
3901 Control how the NFS server code allocates CPUs to
3902 service thread pools. Depending on how many NICs
3903 you have and where their interrupts are bound, this
3904 option will affect which CPUs will do NFS serving.
3905 Note: this parameter cannot be changed while the
3906 NFS server is running.
3908 auto the server chooses an appropriate mode
3909 automatically using heuristics
3910 global a single global pool contains all CPUs
3911 percpu one pool for each CPU
3912 pernode one pool for each NUMA node (equivalent
3913 to global on non-NUMA machines)
3915 sunrpc.tcp_slot_table_entries=
3916 sunrpc.udp_slot_table_entries=
3918 Sets the upper limit on the number of simultaneous
3919 RPC calls that can be sent from the client to a
3920 server. Increasing these values may allow you to
3921 improve throughput, but will also increase the
3922 amount of memory reserved for use by the client.
3924 suspend.pm_test_delay=
3926 Sets the number of seconds to remain in a suspend test
3927 mode before resuming the system (see
3928 /sys/power/pm_test). Only available when CONFIG_PM_DEBUG
3929 is set. Default value is 5.
3932 [KNL] Enable accounting of swap in memory resource
3933 controller if no parameter or 1 is given or disable
3934 it if 0 is given (See Documentation/cgroup-v1/memory.txt)
3936 swiotlb= [ARM,IA-64,PPC,MIPS,X86]
3937 Format: { <int> | force }
3938 <int> -- Number of I/O TLB slabs
3939 force -- force using of bounce buffers even if they
3940 wouldn't be automatically used by the kernel
3944 sysfs.deprecated=0|1 [KNL]
3945 Enable/disable old style sysfs layout for old udev
3946 on older distributions. When this option is enabled
3947 very new udev will not work anymore. When this option
3948 is disabled (or CONFIG_SYSFS_DEPRECATED not compiled)
3949 in older udev will not work anymore.
3950 Default depends on CONFIG_SYSFS_DEPRECATED_V2 set in
3951 the kernel configuration.
3953 sysrq_always_enabled
3955 Ignore sysrq setting - this boot parameter will
3956 neutralize any effect of /proc/sys/kernel/sysrq.
3957 Useful for debugging.
3959 tcpmhash_entries= [KNL,NET]
3960 Set the number of tcp_metrics_hash slots.
3961 Default value is 8192 or 16384 depending on total
3962 ram pages. This is used to specify the TCP metrics
3963 cache size. See Documentation/networking/ip-sysctl.txt
3964 "tcp_no_metrics_save" section for more details.
3968 test_suspend= [SUSPEND][,N]
3969 Specify "mem" (for Suspend-to-RAM) or "standby" (for
3970 standby suspend) or "freeze" (for suspend type freeze)
3971 as the system sleep state during system startup with
3972 the optional capability to repeat N number of times.
3973 The system is woken from this state using a
3974 wakeup-capable RTC alarm.
3976 thash_entries= [KNL,NET]
3977 Set number of hash buckets for TCP connection
3979 thermal.act= [HW,ACPI]
3980 -1: disable all active trip points in all thermal zones
3981 <degrees C>: override all lowest active trip points
3983 thermal.crt= [HW,ACPI]
3984 -1: disable all critical trip points in all thermal zones
3985 <degrees C>: override all critical trip points
3987 thermal.nocrt= [HW,ACPI]
3988 Set to disable actions on ACPI thermal zone
3989 critical and hot trip points.
3991 thermal.off= [HW,ACPI]
3992 1: disable ACPI thermal control
3994 thermal.psv= [HW,ACPI]
3995 -1: disable all passive trip points
3996 <degrees C>: override all passive trip points to this
3999 thermal.tzp= [HW,ACPI]
4000 Specify global default ACPI thermal zone polling rate
4001 <deci-seconds>: poll all this frequency
4002 0: no polling (default)
4005 Force threading of all interrupt handlers except those
4006 marked explicitly IRQF_NO_THREAD.
4009 Enable the Transcendent memory driver if built-in.
4011 tmem.cleancache=0|1 [KNL, XEN]
4012 Default is on (1). Disable the usage of the cleancache
4013 API to send anonymous pages to the hypervisor.
4015 tmem.frontswap=0|1 [KNL, XEN]
4016 Default is on (1). Disable the usage of the frontswap
4017 API to send swap pages to the hypervisor. If disabled
4018 the selfballooning and selfshrinking are force disabled.
4020 tmem.selfballooning=0|1 [KNL, XEN]
4021 Default is on (1). Disable the driving of swap pages
4024 tmem.selfshrinking=0|1 [KNL, XEN]
4025 Default is on (1). Partial swapoff that immediately
4026 transfers pages from Xen hypervisor back to the
4027 kernel based on different criteria.
4031 Specify if the kernel should make use of the cpu
4032 topology information if the hardware supports this.
4033 The scheduler will make use of this information and
4034 e.g. base its process migration decisions on it.
4037 topology_updates= [KNL, PPC, NUMA]
4039 Specify if the kernel should ignore (off)
4040 topology updates sent by the hypervisor to this
4045 tpm_suspend_pcr=[HW,TPM]
4046 Format: integer pcr id
4047 Specify that at suspend time, the tpm driver
4048 should extend the specified pcr with zeros,
4049 as a workaround for some chips which fail to
4050 flush the last written pcr on TPM_SaveState.
4051 This will guarantee that all the other pcrs
4054 trace_buf_size=nn[KMG]
4055 [FTRACE] will set tracing buffer size on each cpu.
4057 trace_event=[event-list]
4058 [FTRACE] Set and start specified trace events in order
4059 to facilitate early boot debugging. The event-list is a
4060 comma separated list of trace events to enable. See
4061 also Documentation/trace/events.txt
4063 trace_options=[option-list]
4064 [FTRACE] Enable or disable tracer options at boot.
4065 The option-list is a comma delimited list of options
4066 that can be enabled or disabled just as if you were
4067 to echo the option name into
4069 /sys/kernel/debug/tracing/trace_options
4071 For example, to enable stacktrace option (to dump the
4072 stack trace of each event), add to the command line:
4074 trace_options=stacktrace
4076 See also Documentation/trace/ftrace.txt "trace options"
4080 Have the tracepoints sent to printk as well as the
4081 tracing ring buffer. This is useful for early boot up
4082 where the system hangs or reboots and does not give the
4083 option for reading the tracing buffer or performing a
4084 ftrace_dump_on_oops.
4086 To turn off having tracepoints sent to printk,
4087 echo 0 > /proc/sys/kernel/tracepoint_printk
4088 Note, echoing 1 into this file without the
4089 tracepoint_printk kernel cmdline option has no effect.
4093 Having tracepoints sent to printk() and activating high
4094 frequency tracepoints such as irq or sched, can cause
4095 the system to live lock.
4098 [FTRACE] enable this option to disable tracing when a
4099 warning is hit. This turns off "tracing_on". Tracing can
4100 be enabled again by echoing '1' into the "tracing_on"
4101 file located in /sys/kernel/debug/tracing/
4103 This option is useful, as it disables the trace before
4104 the WARNING dump is called, which prevents the trace to
4105 be filled with content caused by the warning output.
4107 This option can also be set at run time via the sysctl
4108 option: kernel/traceoff_on_warning
4110 transparent_hugepage=
4112 Format: [always|madvise|never]
4113 Can be used to control the default behavior of the system
4114 with respect to transparent hugepages.
4115 See Documentation/vm/transhuge.txt for more details.
4117 tsc= Disable clocksource stability checks for TSC.
4119 [x86] reliable: mark tsc clocksource as reliable, this
4120 disables clocksource verification at runtime, as well
4121 as the stability checks done at bootup. Used to enable
4122 high-resolution timer mode on older hardware, and in
4123 virtualized environment.
4124 [x86] noirqtime: Do not use TSC to do irq accounting.
4125 Used to run time disable IRQ_TIME_ACCOUNTING on any
4126 platforms where RDTSC is slow and this accounting
4129 turbografx.map[2|3]= [HW,JOY]
4130 TurboGraFX parallel port interface
4132 <port#>,<js1>,<js2>,<js3>,<js4>,<js5>,<js6>,<js7>
4133 See also Documentation/input/joystick-parport.txt
4135 udbg-immortal [PPC] When debugging early kernel crashes that
4136 happen after console_init() and before a proper
4137 console driver takes over, this boot options might
4138 help "seeing" what's going on.
4140 uhash_entries= [KNL,NET]
4141 Set number of hash buckets for UDP/UDP-Lite connections
4144 [USB] Ignore overcurrent events (default N).
4145 Some badly-designed motherboards generate lots of
4146 bogus events, for ports that aren't wired to
4147 anything. Set this parameter to avoid log spamming.
4148 Note that genuine overcurrent events won't be
4152 [X86] Cause panic on unknown NMI.
4154 usbcore.authorized_default=
4155 [USB] Default USB device authorization:
4156 (default -1 = authorized except for wireless USB,
4157 0 = not authorized, 1 = authorized)
4159 usbcore.autosuspend=
4160 [USB] The autosuspend time delay (in seconds) used
4161 for newly-detected USB devices (default 2). This
4162 is the time required before an idle device will be
4163 autosuspended. Devices for which the delay is set
4164 to a negative value won't be autosuspended at all.
4166 usbcore.usbfs_snoop=
4167 [USB] Set to log all usbfs traffic (default 0 = off).
4169 usbcore.usbfs_snoop_max=
4170 [USB] Maximum number of bytes to snoop in each URB
4173 usbcore.blinkenlights=
4174 [USB] Set to cycle leds on hubs (default 0 = off).
4176 usbcore.old_scheme_first=
4177 [USB] Start with the old device initialization
4178 scheme (default 0 = off).
4180 usbcore.usbfs_memory_mb=
4181 [USB] Memory limit (in MB) for buffers allocated by
4182 usbfs (default = 16, 0 = max = 2047).
4184 usbcore.use_both_schemes=
4185 [USB] Try the other device initialization scheme
4186 if the first one fails (default 1 = enabled).
4188 usbcore.initial_descriptor_timeout=
4189 [USB] Specifies timeout for the initial 64-byte
4190 USB_REQ_GET_DESCRIPTOR request in milliseconds
4191 (default 5000 = 5.0 seconds).
4193 usbcore.nousb [USB] Disable the USB subsystem
4196 [USBHID] The interval which mice are to be polled at.
4198 usb-storage.delay_use=
4199 [UMS] The delay in seconds before a new device is
4200 scanned for Logical Units (default 1).
4203 [UMS] A list of quirks entries to supplement or
4204 override the built-in unusual_devs list. List
4205 entries are separated by commas. Each entry has
4206 the form VID:PID:Flags where VID and PID are Vendor
4207 and Product ID values (4-digit hex numbers) and
4208 Flags is a set of characters, each corresponding
4209 to a common usb-storage quirk flag as follows:
4210 a = SANE_SENSE (collect more than 18 bytes
4212 b = BAD_SENSE (don't collect more than 18
4213 bytes of sense data);
4214 c = FIX_CAPACITY (decrease the reported
4215 device capacity by one sector);
4216 d = NO_READ_DISC_INFO (don't use
4217 READ_DISC_INFO command);
4218 e = NO_READ_CAPACITY_16 (don't use
4219 READ_CAPACITY_16 command);
4220 f = NO_REPORT_OPCODES (don't use report opcodes
4222 g = MAX_SECTORS_240 (don't transfer more than
4223 240 sectors at a time, uas only);
4224 h = CAPACITY_HEURISTICS (decrease the
4225 reported device capacity by one
4226 sector if the number is odd);
4227 i = IGNORE_DEVICE (don't bind to this
4229 j = NO_REPORT_LUNS (don't use report luns
4231 l = NOT_LOCKABLE (don't try to lock and
4232 unlock ejectable media);
4233 m = MAX_SECTORS_64 (don't transfer more
4234 than 64 sectors = 32 KB at a time);
4235 n = INITIAL_READ10 (force a retry of the
4236 initial READ(10) command);
4237 o = CAPACITY_OK (accept the capacity
4238 reported by the device);
4239 p = WRITE_CACHE (the device cache is ON
4241 r = IGNORE_RESIDUE (the device reports
4242 bogus residue values);
4243 s = SINGLE_LUN (the device has only one
4245 t = NO_ATA_1X (don't allow ATA(12) and ATA(16)
4246 commands, uas only);
4247 u = IGNORE_UAS (don't bind to the uas driver);
4248 w = NO_WP_DETECT (don't test whether the
4249 medium is write-protected).
4250 Example: quirks=0419:aaf5:rl,0421:0433:rc
4252 user_debug= [KNL,ARM]
4254 See arch/arm/Kconfig.debug help text.
4255 1 - undefined instruction events
4257 4 - invalid data aborts
4260 Example: user_debug=31
4263 [X86] Flags controlling user PTE allocations.
4265 nohigh = do not allocate PTE pages in
4266 HIGHMEM regardless of setting
4270 On X86_32, this is an alias for vdso32=. Otherwise:
4272 vdso=1: enable VDSO (the default)
4273 vdso=0: disable VDSO mapping
4275 vdso32= [X86] Control the 32-bit vDSO
4276 vdso32=1: enable 32-bit VDSO
4277 vdso32=0 or vdso32=2: disable 32-bit VDSO
4279 See the help text for CONFIG_COMPAT_VDSO for more
4280 details. If CONFIG_COMPAT_VDSO is set, the default is
4281 vdso32=0; otherwise, the default is vdso32=1.
4283 For compatibility with older kernels, vdso32=2 is an
4286 Try vdso32=0 if you encounter an error that says:
4287 dl_main: Assertion `(void *) ph->p_vaddr == _rtld_local._dl_sysinfo_dso' failed!
4290 vector=percpu: enable percpu vector domain
4292 video= [FB] Frame buffer configuration
4293 See Documentation/fb/modedb.txt.
4295 video.brightness_switch_enabled= [0,1]
4296 If set to 1, on receiving an ACPI notify event
4297 generated by hotkey, video driver will adjust brightness
4298 level and then send out the event to user space through
4299 the allocated input device; If set to 0, video driver
4300 will only send out the event without touching backlight
4305 [VMMIO] Memory mapped virtio (platform) device.
4307 <size>@<baseaddr>:<irq>[:<id>]
4309 <size> := size (can use standard suffixes
4311 <baseaddr> := physical base address
4312 <irq> := interrupt number (as passed to
4314 <id> := (optional) platform device id
4316 virtio_mmio.device=1K@0x100b0000:48:7
4318 Can be used multiple times for multiple devices.
4320 vga= [BOOT,X86-32] Select a particular video mode
4321 See Documentation/x86/boot.txt and
4322 Documentation/svga.txt.
4323 Use vga=ask for menu.
4324 This is actually a boot loader parameter; the value is
4325 passed to the kernel using a special protocol.
4327 vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact
4328 size of <nn>. This can be used to increase the
4329 minimum size (128MB on x86). It can also be used to
4330 decrease the size and leave more room for directly
4333 vmhalt= [KNL,S390] Perform z/VM CP command after system halt.
4336 vmpanic= [KNL,S390] Perform z/VM CP command after kernel panic.
4339 vmpoff= [KNL,S390] Perform z/VM CP command after power off.
4343 Controls the behavior of vsyscalls (i.e. calls to
4344 fixed addresses of 0xffffffffff600x00 from legacy
4345 code). Most statically-linked binaries and older
4346 versions of glibc use these calls. Because these
4347 functions are at fixed addresses, they make nice
4348 targets for exploits that can control RIP.
4350 emulate [default] Vsyscalls turn into traps and are
4351 emulated reasonably safely.
4353 native Vsyscalls are native syscall instructions.
4354 This is a little bit faster than trapping
4355 and makes a few dynamic recompilers work
4356 better than they would in emulation mode.
4357 It also makes exploits much easier to write.
4359 none Vsyscalls don't work at all. This makes
4360 them quite hard to use for exploits but
4361 might break your system.
4363 vt.color= [VT] Default text color.
4364 Format: 0xYX, X = foreground, Y = background.
4365 Default: 0x07 = light gray on black.
4367 vt.cur_default= [VT] Default cursor shape.
4368 Format: 0xCCBBAA, where AA, BB, and CC are the same as
4369 the parameters of the <Esc>[?A;B;Cc escape sequence;
4370 see VGA-softcursor.txt. Default: 2 = underline.
4372 vt.default_blu= [VT]
4373 Format: <blue0>,<blue1>,<blue2>,...,<blue15>
4374 Change the default blue palette of the console.
4375 This is a 16-member array composed of values
4378 vt.default_grn= [VT]
4379 Format: <green0>,<green1>,<green2>,...,<green15>
4380 Change the default green palette of the console.
4381 This is a 16-member array composed of values
4384 vt.default_red= [VT]
4385 Format: <red0>,<red1>,<red2>,...,<red15>
4386 Change the default red palette of the console.
4387 This is a 16-member array composed of values
4393 Set system-wide default UTF-8 mode for all tty's.
4394 Default is 1, i.e. UTF-8 mode is enabled for all
4395 newly opened terminals.
4397 vt.global_cursor_default=
4400 Set system-wide default for whether a cursor
4401 is shown on new VTs. Default is -1,
4402 i.e. cursors will be created by default unless
4403 overridden by individual drivers. 0 will hide
4404 cursors, 1 will display them.
4406 vt.italic= [VT] Default color for italic text; 0-15.
4409 vt.underline= [VT] Default color for underlined text; 0-15.
4412 watchdog timers [HW,WDT] For information on watchdog timers,
4413 see Documentation/watchdog/watchdog-parameters.txt
4414 or other driver-specific files in the
4415 Documentation/watchdog/ directory.
4417 workqueue.watchdog_thresh=
4418 If CONFIG_WQ_WATCHDOG is configured, workqueue can
4419 warn stall conditions and dump internal state to
4420 help debugging. 0 disables workqueue stall
4421 detection; otherwise, it's the stall threshold
4422 duration in seconds. The default value is 30 and
4423 it can be updated at runtime by writing to the
4424 corresponding sysfs file.
4426 workqueue.disable_numa
4427 By default, all work items queued to unbound
4428 workqueues are affine to the NUMA nodes they're
4429 issued on, which results in better behavior in
4430 general. If NUMA affinity needs to be disabled for
4431 whatever reason, this option can be used. Note
4432 that this also can be controlled per-workqueue for
4433 workqueues visible under /sys/bus/workqueue/.
4435 workqueue.power_efficient
4436 Per-cpu workqueues are generally preferred because
4437 they show better performance thanks to cache
4438 locality; unfortunately, per-cpu workqueues tend to
4439 be more power hungry than unbound workqueues.
4441 Enabling this makes the per-cpu workqueues which
4442 were observed to contribute significantly to power
4443 consumption unbound, leading to measurably lower
4444 power usage at the cost of small performance
4447 The default value of this parameter is determined by
4448 the config option CONFIG_WQ_POWER_EFFICIENT_DEFAULT.
4450 workqueue.debug_force_rr_cpu
4451 Workqueue used to implicitly guarantee that work
4452 items queued without explicit CPU specified are put
4453 on the local CPU. This guarantee is no longer true
4454 and while local CPU is still preferred work items
4455 may be put on foreign CPUs. This debug option
4456 forces round-robin CPU selection to flush out
4457 usages which depend on the now broken guarantee.
4458 When enabled, memory and cache locality will be
4461 x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of
4462 default x2apic cluster mode on platforms
4465 x86_intel_mid_timer= [X86-32,APBT]
4466 Choose timer option for x86 Intel MID platform.
4467 Two valid options are apbt timer only and lapic timer
4468 plus one apbt timer for broadcast timer.
4469 x86_intel_mid_timer=apbt_only | lapic_and_apbt
4471 xen_512gb_limit [KNL,X86-64,XEN]
4472 Restricts the kernel running paravirtualized under Xen
4473 to use only up to 512 GB of RAM. The reason to do so is
4474 crash analysis tools and Xen tools for doing domain
4475 save/restore/migration must be enabled to handle larger
4478 xen_emul_unplug= [HW,X86,XEN]
4479 Unplug Xen emulated devices
4480 Format: [unplug0,][unplug1]
4481 ide-disks -- unplug primary master IDE devices
4482 aux-ide-disks -- unplug non-primary-master IDE devices
4483 nics -- unplug network devices
4484 all -- unplug all emulated devices (NICs and IDE disks)
4485 unnecessary -- unplugging emulated devices is
4486 unnecessary even if the host did not respond to
4488 never -- do not unplug even if version check succeeds
4490 xen_nopvspin [X86,XEN]
4491 Disables the ticketlock slowpath using Xen PV
4495 Disables the PV optimizations forcing the HVM guest to
4496 run as generic HVM guest with no PV drivers.
4498 xirc2ps_cs= [NET,PCMCIA]
4500 <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
4502 ______________________________________________________________________
4506 Add more DRM drivers.
projects / platform / kernel / linux-rpi.git / blob