Documentation/hwmon/bpa-rs600.rst

   1 .. SPDX-License-Identifier: GPL-2.0
   2
   3 Kernel driver bpa-rs600
   4 =======================
   5
   6 Supported chips:
   7
   8   * BPA-RS600-120
   9
  10     Datasheet: Publicly available at the BluTek website
  11        http://blutekpower.com/wp-content/uploads/2019/01/BPA-RS600-120-07-19-2018.pdf
  12
  13 Authors:
  14       - Chris Packham <chris.packham@alliedtelesis.co.nz>
  15
  16 Description
  17 -----------
  18
  19 The BPA-RS600 is a compact 600W removable power supply module.
  20
  21 Usage Notes
  22 -----------
  23
  24 This driver does not probe for PMBus devices. You will have to instantiate
  25 devices explicitly.
  26
  27 Sysfs attributes
  28 ----------------
  29
  30 ======================= ============================================
  31 curr1_label             "iin"
  32 curr1_input             Measured input current
  33 curr1_max               Maximum input current
  34 curr1_max_alarm         Input current high alarm
  35
  36 curr2_label             "iout1"
  37 curr2_input             Measured output current
  38 curr2_max               Maximum output current
  39 curr2_max_alarm         Output current high alarm
  40
  41 fan1_input              Measured fan speed
  42 fan1_alarm              Fan warning
  43 fan1_fault              Fan fault
  44
  45 in1_label               "vin"
  46 in1_input               Measured input voltage
  47 in1_max                 Maximum input voltage
  48 in1_max_alarm           Input voltage high alarm
  49 in1_min                 Minimum input voltage
  50 in1_min_alarm           Input voltage low alarm
  51
  52 in2_label               "vout1"
  53 in2_input               Measured output voltage
  54 in2_max                 Maximum output voltage
  55 in2_max_alarm           Output voltage high alarm
  56 in2_min                 Maximum output voltage
  57 in2_min_alarm           Output voltage low alarm
  58
  59 power1_label            "pin"
  60 power1_input            Measured input power
  61 power1_alarm            Input power alarm
  62 power1_max              Maximum input power
  63
  64 power2_label            "pout1"
  65 power2_input            Measured output power
  66 power2_max              Maximum output power
  67 power2_max_alarm        Output power high alarm
  68
  69 temp1_input             Measured temperature around input connector
  70 temp1_alarm             Temperature alarm
  71
  72 temp2_input             Measured temperature around output connector
  73 temp2_alarm             Temperature alarm
  74 ======================= ============================================