2 Overview of the Linux Virtual File System
4 Original author: Richard Gooch <rgooch@atnf.csiro.au>
6 Last updated on June 24, 2007.
8 Copyright (C) 1999 Richard Gooch
9 Copyright (C) 2005 Pekka Enberg
11 This file is released under the GPLv2.
17 The Virtual File System (also known as the Virtual Filesystem Switch)
18 is the software layer in the kernel that provides the filesystem
19 interface to userspace programs. It also provides an abstraction
20 within the kernel which allows different filesystem implementations to
23 VFS system calls open(2), stat(2), read(2), write(2), chmod(2) and so
24 on are called from a process context. Filesystem locking is described
25 in the document Documentation/filesystems/Locking.
28 Directory Entry Cache (dcache)
29 ------------------------------
31 The VFS implements the open(2), stat(2), chmod(2), and similar system
32 calls. The pathname argument that is passed to them is used by the VFS
33 to search through the directory entry cache (also known as the dentry
34 cache or dcache). This provides a very fast look-up mechanism to
35 translate a pathname (filename) into a specific dentry. Dentries live
36 in RAM and are never saved to disc: they exist only for performance.
38 The dentry cache is meant to be a view into your entire filespace. As
39 most computers cannot fit all dentries in the RAM at the same time,
40 some bits of the cache are missing. In order to resolve your pathname
41 into a dentry, the VFS may have to resort to creating dentries along
42 the way, and then loading the inode. This is done by looking up the
49 An individual dentry usually has a pointer to an inode. Inodes are
50 filesystem objects such as regular files, directories, FIFOs and other
51 beasts. They live either on the disc (for block device filesystems)
52 or in the memory (for pseudo filesystems). Inodes that live on the
53 disc are copied into the memory when required and changes to the inode
54 are written back to disc. A single inode can be pointed to by multiple
55 dentries (hard links, for example, do this).
57 To look up an inode requires that the VFS calls the lookup() method of
58 the parent directory inode. This method is installed by the specific
59 filesystem implementation that the inode lives in. Once the VFS has
60 the required dentry (and hence the inode), we can do all those boring
61 things like open(2) the file, or stat(2) it to peek at the inode
62 data. The stat(2) operation is fairly simple: once the VFS has the
63 dentry, it peeks at the inode data and passes some of it back to
70 Opening a file requires another operation: allocation of a file
71 structure (this is the kernel-side implementation of file
72 descriptors). The freshly allocated file structure is initialized with
73 a pointer to the dentry and a set of file operation member functions.
74 These are taken from the inode data. The open() file method is then
75 called so the specific filesystem implementation can do its work. You
76 can see that this is another switch performed by the VFS. The file
77 structure is placed into the file descriptor table for the process.
79 Reading, writing and closing files (and other assorted VFS operations)
80 is done by using the userspace file descriptor to grab the appropriate
81 file structure, and then calling the required file structure method to
82 do whatever is required. For as long as the file is open, it keeps the
83 dentry in use, which in turn means that the VFS inode is still in use.
86 Registering and Mounting a Filesystem
87 =====================================
89 To register and unregister a filesystem, use the following API
94 extern int register_filesystem(struct file_system_type *);
95 extern int unregister_filesystem(struct file_system_type *);
97 The passed struct file_system_type describes your filesystem. When a
98 request is made to mount a filesystem onto a directory in your namespace,
99 the VFS will call the appropriate mount() method for the specific
100 filesystem. New vfsmount referring to the tree returned by ->mount()
101 will be attached to the mountpoint, so that when pathname resolution
102 reaches the mountpoint it will jump into the root of that vfsmount.
104 You can see all filesystems that are registered to the kernel in the
105 file /proc/filesystems.
108 struct file_system_type
109 -----------------------
111 This describes the filesystem. As of kernel 2.6.39, the following
114 struct file_system_type {
117 struct dentry *(*mount) (struct file_system_type *, int,
118 const char *, void *);
119 void (*kill_sb) (struct super_block *);
120 struct module *owner;
121 struct file_system_type * next;
122 struct list_head fs_supers;
123 struct lock_class_key s_lock_key;
124 struct lock_class_key s_umount_key;
127 name: the name of the filesystem type, such as "ext2", "iso9660",
130 fs_flags: various flags (i.e. FS_REQUIRES_DEV, FS_NO_DCACHE, etc.)
132 mount: the method to call when a new instance of this
133 filesystem should be mounted
135 kill_sb: the method to call when an instance of this filesystem
138 owner: for internal VFS use: you should initialize this to THIS_MODULE in
141 next: for internal VFS use: you should initialize this to NULL
143 s_lock_key, s_umount_key: lockdep-specific
145 The mount() method has the following arguments:
147 struct file_system_type *fs_type: describes the filesystem, partly initialized
148 by the specific filesystem code
150 int flags: mount flags
152 const char *dev_name: the device name we are mounting.
154 void *data: arbitrary mount options, usually comes as an ASCII
155 string (see "Mount Options" section)
157 The mount() method must return the root dentry of the tree requested by
158 caller. An active reference to its superblock must be grabbed and the
159 superblock must be locked. On failure it should return ERR_PTR(error).
161 The arguments match those of mount(2) and their interpretation
162 depends on filesystem type. E.g. for block filesystems, dev_name is
163 interpreted as block device name, that device is opened and if it
164 contains a suitable filesystem image the method creates and initializes
165 struct super_block accordingly, returning its root dentry to caller.
167 ->mount() may choose to return a subtree of existing filesystem - it
168 doesn't have to create a new one. The main result from the caller's
169 point of view is a reference to dentry at the root of (sub)tree to
170 be attached; creation of new superblock is a common side effect.
172 The most interesting member of the superblock structure that the
173 mount() method fills in is the "s_op" field. This is a pointer to
174 a "struct super_operations" which describes the next level of the
175 filesystem implementation.
177 Usually, a filesystem uses one of the generic mount() implementations
178 and provides a fill_super() callback instead. The generic variants are:
180 mount_bdev: mount a filesystem residing on a block device
182 mount_nodev: mount a filesystem that is not backed by a device
184 mount_single: mount a filesystem which shares the instance between
187 A fill_super() callback implementation has the following arguments:
189 struct super_block *sb: the superblock structure. The callback
190 must initialize this properly.
192 void *data: arbitrary mount options, usually comes as an ASCII
193 string (see "Mount Options" section)
195 int silent: whether or not to be silent on error
198 The Superblock Object
199 =====================
201 A superblock object represents a mounted filesystem.
204 struct super_operations
205 -----------------------
207 This describes how the VFS can manipulate the superblock of your
208 filesystem. As of kernel 2.6.22, the following members are defined:
210 struct super_operations {
211 struct inode *(*alloc_inode)(struct super_block *sb);
212 void (*destroy_inode)(struct inode *);
214 void (*dirty_inode) (struct inode *, int flags);
215 int (*write_inode) (struct inode *, int);
216 void (*drop_inode) (struct inode *);
217 void (*delete_inode) (struct inode *);
218 void (*put_super) (struct super_block *);
219 void (*write_super) (struct super_block *);
220 int (*sync_fs)(struct super_block *sb, int wait);
221 int (*freeze_fs) (struct super_block *);
222 int (*unfreeze_fs) (struct super_block *);
223 int (*statfs) (struct dentry *, struct kstatfs *);
224 int (*remount_fs) (struct super_block *, int *, char *);
225 void (*clear_inode) (struct inode *);
226 void (*umount_begin) (struct super_block *);
228 int (*show_options)(struct seq_file *, struct dentry *);
230 ssize_t (*quota_read)(struct super_block *, int, char *, size_t, loff_t);
231 ssize_t (*quota_write)(struct super_block *, int, const char *, size_t, loff_t);
232 int (*nr_cached_objects)(struct super_block *);
233 void (*free_cached_objects)(struct super_block *, int);
236 All methods are called without any locks being held, unless otherwise
237 noted. This means that most methods can block safely. All methods are
238 only called from a process context (i.e. not from an interrupt handler
241 alloc_inode: this method is called by inode_alloc() to allocate memory
242 for struct inode and initialize it. If this function is not
243 defined, a simple 'struct inode' is allocated. Normally
244 alloc_inode will be used to allocate a larger structure which
245 contains a 'struct inode' embedded within it.
247 destroy_inode: this method is called by destroy_inode() to release
248 resources allocated for struct inode. It is only required if
249 ->alloc_inode was defined and simply undoes anything done by
252 dirty_inode: this method is called by the VFS to mark an inode dirty.
254 write_inode: this method is called when the VFS needs to write an
255 inode to disc. The second parameter indicates whether the write
256 should be synchronous or not, not all filesystems check this flag.
258 drop_inode: called when the last access to the inode is dropped,
259 with the inode->i_lock spinlock held.
261 This method should be either NULL (normal UNIX filesystem
262 semantics) or "generic_delete_inode" (for filesystems that do not
263 want to cache inodes - causing "delete_inode" to always be
264 called regardless of the value of i_nlink)
266 The "generic_delete_inode()" behavior is equivalent to the
267 old practice of using "force_delete" in the put_inode() case,
268 but does not have the races that the "force_delete()" approach
271 delete_inode: called when the VFS wants to delete an inode
273 put_super: called when the VFS wishes to free the superblock
274 (i.e. unmount). This is called with the superblock lock held
276 write_super: called when the VFS superblock needs to be written to
277 disc. This method is optional
279 sync_fs: called when VFS is writing out all dirty data associated with
280 a superblock. The second parameter indicates whether the method
281 should wait until the write out has been completed. Optional.
283 freeze_fs: called when VFS is locking a filesystem and
284 forcing it into a consistent state. This method is currently
285 used by the Logical Volume Manager (LVM).
287 unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
290 statfs: called when the VFS needs to get filesystem statistics.
292 remount_fs: called when the filesystem is remounted. This is called
293 with the kernel lock held
295 clear_inode: called then the VFS clears the inode. Optional
297 umount_begin: called when the VFS is unmounting a filesystem.
299 show_options: called by the VFS to show mount options for
300 /proc/<pid>/mounts. (see "Mount Options" section)
302 quota_read: called by the VFS to read from filesystem quota file.
304 quota_write: called by the VFS to write to filesystem quota file.
306 nr_cached_objects: called by the sb cache shrinking function for the
307 filesystem to return the number of freeable cached objects it contains.
310 free_cache_objects: called by the sb cache shrinking function for the
311 filesystem to scan the number of objects indicated to try to free them.
312 Optional, but any filesystem implementing this method needs to also
313 implement ->nr_cached_objects for it to be called correctly.
315 We can't do anything with any errors that the filesystem might
316 encountered, hence the void return type. This will never be called if
317 the VM is trying to reclaim under GFP_NOFS conditions, hence this
318 method does not need to handle that situation itself.
320 Implementations must include conditional reschedule calls inside any
321 scanning loop that is done. This allows the VFS to determine
322 appropriate scan batch sizes without having to worry about whether
323 implementations will cause holdoff problems due to large scan batch
326 Whoever sets up the inode is responsible for filling in the "i_op" field. This
327 is a pointer to a "struct inode_operations" which describes the methods that
328 can be performed on individual inodes.
334 An inode object represents an object within the filesystem.
337 struct inode_operations
338 -----------------------
340 This describes how the VFS can manipulate an inode in your
341 filesystem. As of kernel 2.6.22, the following members are defined:
343 struct inode_operations {
344 int (*create) (struct inode *,struct dentry *, umode_t, struct nameidata *);
345 struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *);
346 int (*link) (struct dentry *,struct inode *,struct dentry *);
347 int (*unlink) (struct inode *,struct dentry *);
348 int (*symlink) (struct inode *,struct dentry *,const char *);
349 int (*mkdir) (struct inode *,struct dentry *,umode_t);
350 int (*rmdir) (struct inode *,struct dentry *);
351 int (*mknod) (struct inode *,struct dentry *,umode_t,dev_t);
352 int (*rename) (struct inode *, struct dentry *,
353 struct inode *, struct dentry *);
354 int (*readlink) (struct dentry *, char __user *,int);
355 void * (*follow_link) (struct dentry *, struct nameidata *);
356 void (*put_link) (struct dentry *, struct nameidata *, void *);
357 void (*truncate) (struct inode *);
358 int (*permission) (struct inode *, int);
359 int (*get_acl)(struct inode *, int);
360 int (*setattr) (struct dentry *, struct iattr *);
361 int (*getattr) (struct vfsmount *mnt, struct dentry *, struct kstat *);
362 int (*setxattr) (struct dentry *, const char *,const void *,size_t,int);
363 ssize_t (*getxattr) (struct dentry *, const char *, void *, size_t);
364 ssize_t (*listxattr) (struct dentry *, char *, size_t);
365 int (*removexattr) (struct dentry *, const char *);
368 Again, all methods are called without any locks being held, unless
371 create: called by the open(2) and creat(2) system calls. Only
372 required if you want to support regular files. The dentry you
373 get should not have an inode (i.e. it should be a negative
374 dentry). Here you will probably call d_instantiate() with the
375 dentry and the newly created inode
377 lookup: called when the VFS needs to look up an inode in a parent
378 directory. The name to look for is found in the dentry. This
379 method must call d_add() to insert the found inode into the
380 dentry. The "i_count" field in the inode structure should be
381 incremented. If the named inode does not exist a NULL inode
382 should be inserted into the dentry (this is called a negative
383 dentry). Returning an error code from this routine must only
384 be done on a real error, otherwise creating inodes with system
385 calls like create(2), mknod(2), mkdir(2) and so on will fail.
386 If you wish to overload the dentry methods then you should
387 initialise the "d_dop" field in the dentry; this is a pointer
388 to a struct "dentry_operations".
389 This method is called with the directory inode semaphore held
391 link: called by the link(2) system call. Only required if you want
392 to support hard links. You will probably need to call
393 d_instantiate() just as you would in the create() method
395 unlink: called by the unlink(2) system call. Only required if you
396 want to support deleting inodes
398 symlink: called by the symlink(2) system call. Only required if you
399 want to support symlinks. You will probably need to call
400 d_instantiate() just as you would in the create() method
402 mkdir: called by the mkdir(2) system call. Only required if you want
403 to support creating subdirectories. You will probably need to
404 call d_instantiate() just as you would in the create() method
406 rmdir: called by the rmdir(2) system call. Only required if you want
407 to support deleting subdirectories
409 mknod: called by the mknod(2) system call to create a device (char,
410 block) inode or a named pipe (FIFO) or socket. Only required
411 if you want to support creating these types of inodes. You
412 will probably need to call d_instantiate() just as you would
413 in the create() method
415 rename: called by the rename(2) system call to rename the object to
416 have the parent and name given by the second inode and dentry.
418 readlink: called by the readlink(2) system call. Only required if
419 you want to support reading symbolic links
421 follow_link: called by the VFS to follow a symbolic link to the
422 inode it points to. Only required if you want to support
423 symbolic links. This method returns a void pointer cookie
424 that is passed to put_link().
426 put_link: called by the VFS to release resources allocated by
427 follow_link(). The cookie returned by follow_link() is passed
428 to this method as the last parameter. It is used by
429 filesystems such as NFS where page cache is not stable
430 (i.e. page that was installed when the symbolic link walk
431 started might not be in the page cache at the end of the
434 truncate: Deprecated. This will not be called if ->setsize is defined.
435 Called by the VFS to change the size of a file. The
436 i_size field of the inode is set to the desired size by the
437 VFS before this method is called. This method is called by
438 the truncate(2) system call and related functionality.
440 Note: ->truncate and vmtruncate are deprecated. Do not add new
441 instances/calls of these. Filesystems should be converted to do their
442 truncate sequence via ->setattr().
444 permission: called by the VFS to check for access rights on a POSIX-like
447 May be called in rcu-walk mode (mask & MAY_NOT_BLOCK). If in rcu-walk
448 mode, the filesystem must check the permission without blocking or
449 storing to the inode.
451 If a situation is encountered that rcu-walk cannot handle, return
452 -ECHILD and it will be called again in ref-walk mode.
454 setattr: called by the VFS to set attributes for a file. This method
455 is called by chmod(2) and related system calls.
457 getattr: called by the VFS to get attributes of a file. This method
458 is called by stat(2) and related system calls.
460 setxattr: called by the VFS to set an extended attribute for a file.
461 Extended attribute is a name:value pair associated with an
462 inode. This method is called by setxattr(2) system call.
464 getxattr: called by the VFS to retrieve the value of an extended
465 attribute name. This method is called by getxattr(2) function
468 listxattr: called by the VFS to list all extended attributes for a
469 given file. This method is called by listxattr(2) system call.
471 removexattr: called by the VFS to remove an extended attribute from
472 a file. This method is called by removexattr(2) system call.
475 The Address Space Object
476 ========================
478 The address space object is used to group and manage pages in the page
479 cache. It can be used to keep track of the pages in a file (or
480 anything else) and also track the mapping of sections of the file into
481 process address spaces.
483 There are a number of distinct yet related services that an
484 address-space can provide. These include communicating memory
485 pressure, page lookup by address, and keeping track of pages tagged as
488 The first can be used independently to the others. The VM can try to
489 either write dirty pages in order to clean them, or release clean
490 pages in order to reuse them. To do this it can call the ->writepage
491 method on dirty pages, and ->releasepage on clean pages with
492 PagePrivate set. Clean pages without PagePrivate and with no external
493 references will be released without notice being given to the
496 To achieve this functionality, pages need to be placed on an LRU with
497 lru_cache_add and mark_page_active needs to be called whenever the
500 Pages are normally kept in a radix tree index by ->index. This tree
501 maintains information about the PG_Dirty and PG_Writeback status of
502 each page, so that pages with either of these flags can be found
505 The Dirty tag is primarily used by mpage_writepages - the default
506 ->writepages method. It uses the tag to find dirty pages to call
507 ->writepage on. If mpage_writepages is not used (i.e. the address
508 provides its own ->writepages) , the PAGECACHE_TAG_DIRTY tag is
509 almost unused. write_inode_now and sync_inode do use it (through
510 __sync_single_inode) to check if ->writepages has been successful in
511 writing out the whole address_space.
513 The Writeback tag is used by filemap*wait* and sync_page* functions,
514 via filemap_fdatawait_range, to wait for all writeback to
515 complete. While waiting ->sync_page (if defined) will be called on
516 each page that is found to require writeback.
518 An address_space handler may attach extra information to a page,
519 typically using the 'private' field in the 'struct page'. If such
520 information is attached, the PG_Private flag should be set. This will
521 cause various VM routines to make extra calls into the address_space
522 handler to deal with that data.
524 An address space acts as an intermediate between storage and
525 application. Data is read into the address space a whole page at a
526 time, and provided to the application either by copying of the page,
527 or by memory-mapping the page.
528 Data is written into the address space by the application, and then
529 written-back to storage typically in whole pages, however the
530 address_space has finer control of write sizes.
532 The read process essentially only requires 'readpage'. The write
533 process is more complicated and uses write_begin/write_end or
534 set_page_dirty to write data into the address_space, and writepage,
535 sync_page, and writepages to writeback data to storage.
537 Adding and removing pages to/from an address_space is protected by the
540 When data is written to a page, the PG_Dirty flag should be set. It
541 typically remains set until writepage asks for it to be written. This
542 should clear PG_Dirty and set PG_Writeback. It can be actually
543 written at any point after PG_Dirty is clear. Once it is known to be
544 safe, PG_Writeback is cleared.
546 Writeback makes use of a writeback_control structure...
548 struct address_space_operations
549 -------------------------------
551 This describes how the VFS can manipulate mapping of a file to page cache in
552 your filesystem. As of kernel 2.6.22, the following members are defined:
554 struct address_space_operations {
555 int (*writepage)(struct page *page, struct writeback_control *wbc);
556 int (*readpage)(struct file *, struct page *);
557 int (*sync_page)(struct page *);
558 int (*writepages)(struct address_space *, struct writeback_control *);
559 int (*set_page_dirty)(struct page *page);
560 int (*readpages)(struct file *filp, struct address_space *mapping,
561 struct list_head *pages, unsigned nr_pages);
562 int (*write_begin)(struct file *, struct address_space *mapping,
563 loff_t pos, unsigned len, unsigned flags,
564 struct page **pagep, void **fsdata);
565 int (*write_end)(struct file *, struct address_space *mapping,
566 loff_t pos, unsigned len, unsigned copied,
567 struct page *page, void *fsdata);
568 sector_t (*bmap)(struct address_space *, sector_t);
569 int (*invalidatepage) (struct page *, unsigned long);
570 int (*releasepage) (struct page *, int);
571 void (*freepage)(struct page *);
572 ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
573 loff_t offset, unsigned long nr_segs);
574 struct page* (*get_xip_page)(struct address_space *, sector_t,
576 /* migrate the contents of a page to the specified target */
577 int (*migratepage) (struct page *, struct page *);
578 int (*launder_page) (struct page *);
579 int (*error_remove_page) (struct mapping *mapping, struct page *page);
582 writepage: called by the VM to write a dirty page to backing store.
583 This may happen for data integrity reasons (i.e. 'sync'), or
584 to free up memory (flush). The difference can be seen in
586 The PG_Dirty flag has been cleared and PageLocked is true.
587 writepage should start writeout, should set PG_Writeback,
588 and should make sure the page is unlocked, either synchronously
589 or asynchronously when the write operation completes.
591 If wbc->sync_mode is WB_SYNC_NONE, ->writepage doesn't have to
592 try too hard if there are problems, and may choose to write out
593 other pages from the mapping if that is easier (e.g. due to
594 internal dependencies). If it chooses not to start writeout, it
595 should return AOP_WRITEPAGE_ACTIVATE so that the VM will not keep
596 calling ->writepage on that page.
598 See the file "Locking" for more details.
600 readpage: called by the VM to read a page from backing store.
601 The page will be Locked when readpage is called, and should be
602 unlocked and marked uptodate once the read completes.
603 If ->readpage discovers that it needs to unlock the page for
604 some reason, it can do so, and then return AOP_TRUNCATED_PAGE.
605 In this case, the page will be relocated, relocked and if
606 that all succeeds, ->readpage will be called again.
608 sync_page: called by the VM to notify the backing store to perform all
609 queued I/O operations for a page. I/O operations for other pages
610 associated with this address_space object may also be performed.
612 This function is optional and is called only for pages with
613 PG_Writeback set while waiting for the writeback to complete.
615 writepages: called by the VM to write out pages associated with the
616 address_space object. If wbc->sync_mode is WBC_SYNC_ALL, then
617 the writeback_control will specify a range of pages that must be
618 written out. If it is WBC_SYNC_NONE, then a nr_to_write is given
619 and that many pages should be written if possible.
620 If no ->writepages is given, then mpage_writepages is used
621 instead. This will choose pages from the address space that are
622 tagged as DIRTY and will pass them to ->writepage.
624 set_page_dirty: called by the VM to set a page dirty.
625 This is particularly needed if an address space attaches
626 private data to a page, and that data needs to be updated when
627 a page is dirtied. This is called, for example, when a memory
628 mapped page gets modified.
629 If defined, it should set the PageDirty flag, and the
630 PAGECACHE_TAG_DIRTY tag in the radix tree.
632 readpages: called by the VM to read pages associated with the address_space
633 object. This is essentially just a vector version of
634 readpage. Instead of just one page, several pages are
636 readpages is only used for read-ahead, so read errors are
637 ignored. If anything goes wrong, feel free to give up.
640 Called by the generic buffered write code to ask the filesystem to
641 prepare to write len bytes at the given offset in the file. The
642 address_space should check that the write will be able to complete,
643 by allocating space if necessary and doing any other internal
644 housekeeping. If the write will update parts of any basic-blocks on
645 storage, then those blocks should be pre-read (if they haven't been
646 read already) so that the updated blocks can be written out properly.
648 The filesystem must return the locked pagecache page for the specified
649 offset, in *pagep, for the caller to write into.
651 It must be able to cope with short writes (where the length passed to
652 write_begin is greater than the number of bytes copied into the page).
654 flags is a field for AOP_FLAG_xxx flags, described in
657 A void * may be returned in fsdata, which then gets passed into
660 Returns 0 on success; < 0 on failure (which is the error code), in
661 which case write_end is not called.
663 write_end: After a successful write_begin, and data copy, write_end must
664 be called. len is the original len passed to write_begin, and copied
665 is the amount that was able to be copied (copied == len is always true
666 if write_begin was called with the AOP_FLAG_UNINTERRUPTIBLE flag).
668 The filesystem must take care of unlocking the page and releasing it
669 refcount, and updating i_size.
671 Returns < 0 on failure, otherwise the number of bytes (<= 'copied')
672 that were able to be copied into pagecache.
674 bmap: called by the VFS to map a logical block offset within object to
675 physical block number. This method is used by the FIBMAP
676 ioctl and for working with swap-files. To be able to swap to
677 a file, the file must have a stable mapping to a block
678 device. The swap system does not go through the filesystem
679 but instead uses bmap to find out where the blocks in the file
680 are and uses those addresses directly.
683 invalidatepage: If a page has PagePrivate set, then invalidatepage
684 will be called when part or all of the page is to be removed
685 from the address space. This generally corresponds to either a
686 truncation or a complete invalidation of the address space
687 (in the latter case 'offset' will always be 0).
688 Any private data associated with the page should be updated
689 to reflect this truncation. If offset is 0, then
690 the private data should be released, because the page
691 must be able to be completely discarded. This may be done by
692 calling the ->releasepage function, but in this case the
693 release MUST succeed.
695 releasepage: releasepage is called on PagePrivate pages to indicate
696 that the page should be freed if possible. ->releasepage
697 should remove any private data from the page and clear the
698 PagePrivate flag. If releasepage() fails for some reason, it must
699 indicate failure with a 0 return value.
700 releasepage() is used in two distinct though related cases. The
701 first is when the VM finds a clean page with no active users and
702 wants to make it a free page. If ->releasepage succeeds, the
703 page will be removed from the address_space and become free.
705 The second case is when a request has been made to invalidate
706 some or all pages in an address_space. This can happen
707 through the fadvice(POSIX_FADV_DONTNEED) system call or by the
708 filesystem explicitly requesting it as nfs and 9fs do (when
709 they believe the cache may be out of date with storage) by
710 calling invalidate_inode_pages2().
711 If the filesystem makes such a call, and needs to be certain
712 that all pages are invalidated, then its releasepage will
713 need to ensure this. Possibly it can clear the PageUptodate
714 bit if it cannot free private data yet.
716 freepage: freepage is called once the page is no longer visible in
717 the page cache in order to allow the cleanup of any private
718 data. Since it may be called by the memory reclaimer, it
719 should not assume that the original address_space mapping still
720 exists, and it should not block.
722 direct_IO: called by the generic read/write routines to perform
723 direct_IO - that is IO requests which bypass the page cache
724 and transfer data directly between the storage and the
725 application's address space.
727 get_xip_page: called by the VM to translate a block number to a page.
728 The page is valid until the corresponding filesystem is unmounted.
729 Filesystems that want to use execute-in-place (XIP) need to implement
730 it. An example implementation can be found in fs/ext2/xip.c.
732 migrate_page: This is used to compact the physical memory usage.
733 If the VM wants to relocate a page (maybe off a memory card
734 that is signalling imminent failure) it will pass a new page
735 and an old page to this function. migrate_page should
736 transfer any private data across and update any references
737 that it has to the page.
739 launder_page: Called before freeing a page - it writes back the dirty page. To
740 prevent redirtying the page, it is kept locked during the whole
743 error_remove_page: normally set to generic_error_remove_page if truncation
744 is ok for this address space. Used for memory failure handling.
745 Setting this implies you deal with pages going away under you,
746 unless you have them locked or reference counts increased.
752 A file object represents a file opened by a process.
755 struct file_operations
756 ----------------------
758 This describes how the VFS can manipulate an open file. As of kernel
759 3.5, the following members are defined:
761 struct file_operations {
762 struct module *owner;
763 loff_t (*llseek) (struct file *, loff_t, int);
764 ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
765 ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
766 ssize_t (*aio_read) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
767 ssize_t (*aio_write) (struct kiocb *, const struct iovec *, unsigned long, loff_t);
768 int (*readdir) (struct file *, void *, filldir_t);
769 unsigned int (*poll) (struct file *, struct poll_table_struct *);
770 long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
771 long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
772 int (*mmap) (struct file *, struct vm_area_struct *);
773 int (*open) (struct inode *, struct file *);
774 int (*flush) (struct file *);
775 int (*release) (struct inode *, struct file *);
776 int (*fsync) (struct file *, loff_t, loff_t, int datasync);
777 int (*aio_fsync) (struct kiocb *, int datasync);
778 int (*fasync) (int, struct file *, int);
779 int (*lock) (struct file *, int, struct file_lock *);
780 ssize_t (*readv) (struct file *, const struct iovec *, unsigned long, loff_t *);
781 ssize_t (*writev) (struct file *, const struct iovec *, unsigned long, loff_t *);
782 ssize_t (*sendfile) (struct file *, loff_t *, size_t, read_actor_t, void *);
783 ssize_t (*sendpage) (struct file *, struct page *, int, size_t, loff_t *, int);
784 unsigned long (*get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
785 int (*check_flags)(int);
786 int (*flock) (struct file *, int, struct file_lock *);
787 ssize_t (*splice_write)(struct pipe_inode_info *, struct file *, size_t, unsigned int);
788 ssize_t (*splice_read)(struct file *, struct pipe_inode_info *, size_t, unsigned int);
789 int (*setlease)(struct file *, long arg, struct file_lock **);
790 long (*fallocate)(struct file *, int mode, loff_t offset, loff_t len);
793 Again, all methods are called without any locks being held, unless
796 llseek: called when the VFS needs to move the file position index
798 read: called by read(2) and related system calls
800 aio_read: called by io_submit(2) and other asynchronous I/O operations
802 write: called by write(2) and related system calls
804 aio_write: called by io_submit(2) and other asynchronous I/O operations
806 readdir: called when the VFS needs to read the directory contents
808 poll: called by the VFS when a process wants to check if there is
809 activity on this file and (optionally) go to sleep until there
810 is activity. Called by the select(2) and poll(2) system calls
812 unlocked_ioctl: called by the ioctl(2) system call.
814 compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
815 are used on 64 bit kernels.
817 mmap: called by the mmap(2) system call
819 open: called by the VFS when an inode should be opened. When the VFS
820 opens a file, it creates a new "struct file". It then calls the
821 open method for the newly allocated file structure. You might
822 think that the open method really belongs in
823 "struct inode_operations", and you may be right. I think it's
824 done the way it is because it makes filesystems simpler to
825 implement. The open() method is a good place to initialize the
826 "private_data" member in the file structure if you want to point
827 to a device structure
829 flush: called by the close(2) system call to flush a file
831 release: called when the last reference to an open file is closed
833 fsync: called by the fsync(2) system call
835 fasync: called by the fcntl(2) system call when asynchronous
836 (non-blocking) mode is enabled for a file
838 lock: called by the fcntl(2) system call for F_GETLK, F_SETLK, and F_SETLKW
841 readv: called by the readv(2) system call
843 writev: called by the writev(2) system call
845 sendfile: called by the sendfile(2) system call
847 get_unmapped_area: called by the mmap(2) system call
849 check_flags: called by the fcntl(2) system call for F_SETFL command
851 flock: called by the flock(2) system call
853 splice_write: called by the VFS to splice data from a pipe to a file. This
854 method is used by the splice(2) system call
856 splice_read: called by the VFS to splice data from file to a pipe. This
857 method is used by the splice(2) system call
859 setlease: called by the VFS to set or release a file lock lease.
860 setlease has the file_lock_lock held and must not sleep.
862 fallocate: called by the VFS to preallocate blocks or punch a hole.
864 Note that the file operations are implemented by the specific
865 filesystem in which the inode resides. When opening a device node
866 (character or block special) most filesystems will call special
867 support routines in the VFS which will locate the required device
868 driver information. These support routines replace the filesystem file
869 operations with those for the device driver, and then proceed to call
870 the new open() method for the file. This is how opening a device file
871 in the filesystem eventually ends up calling the device driver open()
875 Directory Entry Cache (dcache)
876 ==============================
879 struct dentry_operations
880 ------------------------
882 This describes how a filesystem can overload the standard dentry
883 operations. Dentries and the dcache are the domain of the VFS and the
884 individual filesystem implementations. Device drivers have no business
885 here. These methods may be set to NULL, as they are either optional or
886 the VFS uses a default. As of kernel 2.6.22, the following members are
889 struct dentry_operations {
890 int (*d_revalidate)(struct dentry *, struct nameidata *);
891 int (*d_hash)(const struct dentry *, const struct inode *,
893 int (*d_compare)(const struct dentry *, const struct inode *,
894 const struct dentry *, const struct inode *,
895 unsigned int, const char *, const struct qstr *);
896 int (*d_delete)(const struct dentry *);
897 void (*d_release)(struct dentry *);
898 void (*d_iput)(struct dentry *, struct inode *);
899 char *(*d_dname)(struct dentry *, char *, int);
900 struct vfsmount *(*d_automount)(struct path *);
901 int (*d_manage)(struct dentry *, bool);
904 d_revalidate: called when the VFS needs to revalidate a dentry. This
905 is called whenever a name look-up finds a dentry in the
906 dcache. Most filesystems leave this as NULL, because all their
907 dentries in the dcache are valid
909 d_revalidate may be called in rcu-walk mode (nd->flags & LOOKUP_RCU).
910 If in rcu-walk mode, the filesystem must revalidate the dentry without
911 blocking or storing to the dentry, d_parent and d_inode should not be
912 used without care (because they can go NULL), instead nd->inode should
915 If a situation is encountered that rcu-walk cannot handle, return
916 -ECHILD and it will be called again in ref-walk mode.
918 d_hash: called when the VFS adds a dentry to the hash table. The first
919 dentry passed to d_hash is the parent directory that the name is
920 to be hashed into. The inode is the dentry's inode.
922 Same locking and synchronisation rules as d_compare regarding
923 what is safe to dereference etc.
925 d_compare: called to compare a dentry name with a given name. The first
926 dentry is the parent of the dentry to be compared, the second is
927 the parent's inode, then the dentry and inode (may be NULL) of the
928 child dentry. len and name string are properties of the dentry to be
929 compared. qstr is the name to compare it with.
931 Must be constant and idempotent, and should not take locks if
932 possible, and should not or store into the dentry or inodes.
933 Should not dereference pointers outside the dentry or inodes without
934 lots of care (eg. d_parent, d_inode, d_name should not be used).
936 However, our vfsmount is pinned, and RCU held, so the dentries and
937 inodes won't disappear, neither will our sb or filesystem module.
938 ->i_sb and ->d_sb may be used.
940 It is a tricky calling convention because it needs to be called under
941 "rcu-walk", ie. without any locks or references on things.
943 d_delete: called when the last reference to a dentry is dropped and the
944 dcache is deciding whether or not to cache it. Return 1 to delete
945 immediately, or 0 to cache the dentry. Default is NULL which means to
946 always cache a reachable dentry. d_delete must be constant and
949 d_release: called when a dentry is really deallocated
951 d_iput: called when a dentry loses its inode (just prior to its
952 being deallocated). The default when this is NULL is that the
953 VFS calls iput(). If you define this method, you must call
956 d_dname: called when the pathname of a dentry should be generated.
957 Useful for some pseudo filesystems (sockfs, pipefs, ...) to delay
958 pathname generation. (Instead of doing it when dentry is created,
959 it's done only when the path is needed.). Real filesystems probably
960 dont want to use it, because their dentries are present in global
961 dcache hash, so their hash should be an invariant. As no lock is
962 held, d_dname() should not try to modify the dentry itself, unless
963 appropriate SMP safety is used. CAUTION : d_path() logic is quite
964 tricky. The correct way to return for example "Hello" is to put it
965 at the end of the buffer, and returns a pointer to the first char.
966 dynamic_dname() helper function is provided to take care of this.
968 d_automount: called when an automount dentry is to be traversed (optional).
969 This should create a new VFS mount record and return the record to the
970 caller. The caller is supplied with a path parameter giving the
971 automount directory to describe the automount target and the parent
972 VFS mount record to provide inheritable mount parameters. NULL should
973 be returned if someone else managed to make the automount first. If
974 the vfsmount creation failed, then an error code should be returned.
975 If -EISDIR is returned, then the directory will be treated as an
976 ordinary directory and returned to pathwalk to continue walking.
978 If a vfsmount is returned, the caller will attempt to mount it on the
979 mountpoint and will remove the vfsmount from its expiration list in
980 the case of failure. The vfsmount should be returned with 2 refs on
981 it to prevent automatic expiration - the caller will clean up the
984 This function is only used if DCACHE_NEED_AUTOMOUNT is set on the
985 dentry. This is set by __d_instantiate() if S_AUTOMOUNT is set on the
988 d_manage: called to allow the filesystem to manage the transition from a
989 dentry (optional). This allows autofs, for example, to hold up clients
990 waiting to explore behind a 'mountpoint' whilst letting the daemon go
991 past and construct the subtree there. 0 should be returned to let the
992 calling process continue. -EISDIR can be returned to tell pathwalk to
993 use this directory as an ordinary directory and to ignore anything
994 mounted on it and not to check the automount flag. Any other error
995 code will abort pathwalk completely.
997 If the 'rcu_walk' parameter is true, then the caller is doing a
998 pathwalk in RCU-walk mode. Sleeping is not permitted in this mode,
999 and the caller can be asked to leave it and call again by returning
1002 This function is only used if DCACHE_MANAGE_TRANSIT is set on the
1003 dentry being transited from.
1007 static char *pipefs_dname(struct dentry *dent, char *buffer, int buflen)
1009 return dynamic_dname(dentry, buffer, buflen, "pipe:[%lu]",
1010 dentry->d_inode->i_ino);
1013 Each dentry has a pointer to its parent dentry, as well as a hash list
1014 of child dentries. Child dentries are basically like files in a
1018 Directory Entry Cache API
1019 --------------------------
1021 There are a number of functions defined which permit a filesystem to
1022 manipulate dentries:
1024 dget: open a new handle for an existing dentry (this just increments
1027 dput: close a handle for a dentry (decrements the usage count). If
1028 the usage count drops to 0, and the dentry is still in its
1029 parent's hash, the "d_delete" method is called to check whether
1030 it should be cached. If it should not be cached, or if the dentry
1031 is not hashed, it is deleted. Otherwise cached dentries are put
1032 into an LRU list to be reclaimed on memory shortage.
1034 d_drop: this unhashes a dentry from its parents hash list. A
1035 subsequent call to dput() will deallocate the dentry if its
1036 usage count drops to 0
1038 d_delete: delete a dentry. If there are no other open references to
1039 the dentry then the dentry is turned into a negative dentry
1040 (the d_iput() method is called). If there are other
1041 references, then d_drop() is called instead
1043 d_add: add a dentry to its parents hash list and then calls
1046 d_instantiate: add a dentry to the alias hash list for the inode and
1047 updates the "d_inode" member. The "i_count" member in the
1048 inode structure should be set/incremented. If the inode
1049 pointer is NULL, the dentry is called a "negative
1050 dentry". This function is commonly called when an inode is
1051 created for an existing negative dentry
1053 d_lookup: look up a dentry given its parent and path name component
1054 It looks up the child of that given name from the dcache
1055 hash table. If it is found, the reference count is incremented
1056 and the dentry is returned. The caller must use dput()
1057 to free the dentry when it finishes using it.
1065 On mount and remount the filesystem is passed a string containing a
1066 comma separated list of mount options. The options can have either of
1072 The <linux/parser.h> header defines an API that helps parse these
1073 options. There are plenty of examples on how to use it in existing
1079 If a filesystem accepts mount options, it must define show_options()
1080 to show all the currently active options. The rules are:
1082 - options MUST be shown which are not default or their values differ
1085 - options MAY be shown which are enabled by default or have their
1088 Options used only internally between a mount helper and the kernel
1089 (such as file descriptors), or which only have an effect during the
1090 mounting (such as ones controlling the creation of a journal) are exempt
1091 from the above rules.
1093 The underlying reason for the above rules is to make sure, that a
1094 mount can be accurately replicated (e.g. umounting and mounting again)
1095 based on the information found in /proc/mounts.
1097 A simple method of saving options at mount/remount time and showing
1098 them is provided with the save_mount_options() and
1099 generic_show_options() helper functions. Please note, that using
1100 these may have drawbacks. For more info see header comments for these
1101 functions in fs/namespace.c.
1106 (Note some of these resources are not up-to-date with the latest kernel
1109 Creating Linux virtual filesystems. 2002
1110 <http://lwn.net/Articles/13325/>
1112 The Linux Virtual File-system Layer by Neil Brown. 1999
1113 <http://www.cse.unsw.edu.au/~neilb/oss/linux-commentary/vfs.html>
1115 A tour of the Linux VFS by Michael K. Johnson. 1996
1116 <http://www.tldp.org/LDP/khg/HyperNews/get/fs/vfstour.html>
1118 A small trail through the Linux kernel by Andries Brouwer. 2001
1119 <http://www.win.tue.nl/~aeb/linux/vfs/trail.html>
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / blob