1 .. SPDX-License-Identifier: GPL-2.0
7 ===================== ======================================= ================
8 /proc/sys Terrehon Bowden <terrehon@pacbell.net>, October 7 1999
9 Bodo Bauer <bb@ricochet.net>
10 2.4.x update Jorge Nerin <comandante@zaralinux.com> November 14 2000
11 move /proc/sys Shen Feng <shen@cn.fujitsu.com> April 1 2009
12 fixes/update part 1.1 Stefani Seibold <stefani@seibold.net> June 9 2009
13 ===================== ======================================= ================
20 0.1 Introduction/Credits
23 1 Collecting System Information
24 1.1 Process-Specific Subdirectories
26 1.3 IDE devices in /proc/ide
27 1.4 Networking info in /proc/net
29 1.6 Parallel port info in /proc/parport
30 1.7 TTY info in /proc/tty
31 1.8 Miscellaneous kernel statistics in /proc/stat
32 1.9 Ext4 file system parameters
34 2 Modifying System Parameters
36 3 Per-Process Parameters
37 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
39 3.2 /proc/<pid>/oom_score - Display current oom-killer score
40 3.3 /proc/<pid>/io - Display the IO accounting fields
41 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
42 3.5 /proc/<pid>/mountinfo - Information about mounts
43 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
44 3.7 /proc/<pid>/task/<tid>/children - Information about task children
45 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
46 3.9 /proc/<pid>/map_files - Information about memory mapped files
47 3.10 /proc/<pid>/timerslack_ns - Task timerslack value
48 3.11 /proc/<pid>/patch_state - Livepatch patch operation state
49 3.12 /proc/<pid>/arch_status - Task architecture specific information
59 0.1 Introduction/Credits
60 ------------------------
62 This documentation is part of a soon (or so we hope) to be released book on
63 the SuSE Linux distribution. As there is no complete documentation for the
64 /proc file system and we've used many freely available sources to write these
65 chapters, it seems only fair to give the work back to the Linux community.
66 This work is based on the 2.2.* kernel version and the upcoming 2.4.*. I'm
67 afraid it's still far from complete, but we hope it will be useful. As far as
68 we know, it is the first 'all-in-one' document about the /proc file system. It
69 is focused on the Intel x86 hardware, so if you are looking for PPC, ARM,
70 SPARC, AXP, etc., features, you probably won't find what you are looking for.
71 It also only covers IPv4 networking, not IPv6 nor other protocols - sorry. But
72 additions and patches are welcome and will be added to this document if you
75 We'd like to thank Alan Cox, Rik van Riel, and Alexey Kuznetsov and a lot of
76 other people for help compiling this documentation. We'd also like to extend a
77 special thank you to Andi Kleen for documentation, which we relied on heavily
78 to create this document, as well as the additional information he provided.
79 Thanks to everybody else who contributed source or docs to the Linux kernel
80 and helped create a great piece of software... :)
82 If you have any comments, corrections or additions, please don't hesitate to
83 contact Bodo Bauer at bb@ricochet.net. We'll be happy to add them to this
86 The latest version of this document is available online at
87 http://tldp.org/LDP/Linux-Filesystem-Hierarchy/html/proc.html
89 If the above direction does not works for you, you could try the kernel
90 mailing list at linux-kernel@vger.kernel.org and/or try to reach me at
91 comandante@zaralinux.com.
96 We don't guarantee the correctness of this document, and if you come to us
97 complaining about how you screwed up your system because of incorrect
98 documentation, we won't feel responsible...
100 Chapter 1: Collecting System Information
101 ========================================
105 * Investigating the properties of the pseudo file system /proc and its
106 ability to provide information on the running Linux system
107 * Examining /proc's structure
108 * Uncovering various information about the kernel and the processes running
111 ------------------------------------------------------------------------------
113 The proc file system acts as an interface to internal data structures in the
114 kernel. It can be used to obtain information about the system and to change
115 certain kernel parameters at runtime (sysctl).
117 First, we'll take a look at the read-only parts of /proc. In Chapter 2, we
118 show you how you can use /proc/sys to change settings.
120 1.1 Process-Specific Subdirectories
121 -----------------------------------
123 The directory /proc contains (among other things) one subdirectory for each
124 process running on the system, which is named after the process ID (PID).
126 The link 'self' points to the process reading the file system. Each process
127 subdirectory has the entries listed in Table 1-1.
129 Note that an open file descriptor to /proc/<pid> or to any of its
130 contained files or subdirectories does not prevent <pid> being reused
131 for some other process in the event that <pid> exits. Operations on
132 open /proc/<pid> file descriptors corresponding to dead processes
133 never act on any new process that the kernel may, through chance, have
134 also assigned the process ID <pid>. Instead, operations on these FDs
135 usually fail with ESRCH.
137 .. table:: Table 1-1: Process specific entries in /proc
139 ============= ===============================================================
141 ============= ===============================================================
142 clear_refs Clears page referenced bits shown in smaps output
143 cmdline Command line arguments
144 cpu Current and last cpu in which it was executed (2.4)(smp)
145 cwd Link to the current working directory
146 environ Values of environment variables
147 exe Link to the executable of this process
148 fd Directory, which contains all file descriptors
149 maps Memory maps to executables and library files (2.4)
150 mem Memory held by this process
151 root Link to the root directory of this process
153 statm Process memory status information
154 status Process status in human readable form
155 wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function
156 symbol the task is blocked in - or "0" if not blocked.
158 stack Report full stack trace, enable via CONFIG_STACKTRACE
159 smaps An extension based on maps, showing the memory consumption of
160 each mapping and flags associated with it
161 smaps_rollup Accumulated smaps stats for all mappings of the process. This
162 can be derived from smaps, but is faster and more convenient
163 numa_maps An extension based on maps, showing the memory locality and
164 binding policy as well as mem usage (in pages) of each mapping.
165 ============= ===============================================================
167 For example, to get the status information of a process, all you have to do is
168 read the file /proc/PID/status::
170 >cat /proc/self/status
200 SigPnd: 0000000000000000
201 ShdPnd: 0000000000000000
202 SigBlk: 0000000000000000
203 SigIgn: 0000000000000000
204 SigCgt: 0000000000000000
205 CapInh: 00000000fffffeff
206 CapPrm: 0000000000000000
207 CapEff: 0000000000000000
208 CapBnd: ffffffffffffffff
209 CapAmb: 0000000000000000
212 Speculation_Store_Bypass: thread vulnerable
213 SpeculationIndirectBranch: conditional enabled
214 voluntary_ctxt_switches: 0
215 nonvoluntary_ctxt_switches: 1
217 This shows you nearly the same information you would get if you viewed it with
218 the ps command. In fact, ps uses the proc file system to obtain its
219 information. But you get a more detailed view of the process by reading the
220 file /proc/PID/status. It fields are described in table 1-2.
222 The statm file contains more detailed information about the process
223 memory usage. Its seven fields are explained in Table 1-3. The stat file
224 contains detailed information about the process itself. Its fields are
225 explained in Table 1-4.
227 (for SMP CONFIG users)
229 For making accounting scalable, RSS related information are handled in an
230 asynchronous manner and the value may not be very precise. To see a precise
231 snapshot of a moment, you can see /proc/<pid>/smaps file and scan page table.
232 It's slow but very precise.
234 .. table:: Table 1-2: Contents of the status files (as of 4.19)
236 ========================== ===================================================
238 ========================== ===================================================
239 Name filename of the executable
240 Umask file mode creation mask
241 State state (R is running, S is sleeping, D is sleeping
242 in an uninterruptible wait, Z is zombie,
243 T is traced or stopped)
245 Ngid NUMA group ID (0 if none)
247 PPid process id of the parent process
248 TracerPid PID of process tracing this process (0 if not)
249 Uid Real, effective, saved set, and file system UIDs
250 Gid Real, effective, saved set, and file system GIDs
251 FDSize number of file descriptor slots currently allocated
252 Groups supplementary group list
253 NStgid descendant namespace thread group ID hierarchy
254 NSpid descendant namespace process ID hierarchy
255 NSpgid descendant namespace process group ID hierarchy
256 NSsid descendant namespace session ID hierarchy
257 VmPeak peak virtual memory size
258 VmSize total program size
259 VmLck locked memory size
260 VmPin pinned memory size
261 VmHWM peak resident set size ("high water mark")
262 VmRSS size of memory portions. It contains the three
264 (VmRSS = RssAnon + RssFile + RssShmem)
265 RssAnon size of resident anonymous memory
266 RssFile size of resident file mappings
267 RssShmem size of resident shmem memory (includes SysV shm,
268 mapping of tmpfs and shared anonymous mappings)
269 VmData size of private data segments
270 VmStk size of stack segments
271 VmExe size of text segment
272 VmLib size of shared library code
273 VmPTE size of page table entries
274 VmSwap amount of swap used by anonymous private data
275 (shmem swap usage is not included)
276 HugetlbPages size of hugetlb memory portions
277 CoreDumping process's memory is currently being dumped
278 (killing the process may lead to a corrupted core)
279 THP_enabled process is allowed to use THP (returns 0 when
280 PR_SET_THP_DISABLE is set on the process
281 Threads number of threads
282 SigQ number of signals queued/max. number for queue
283 SigPnd bitmap of pending signals for the thread
284 ShdPnd bitmap of shared pending signals for the process
285 SigBlk bitmap of blocked signals
286 SigIgn bitmap of ignored signals
287 SigCgt bitmap of caught signals
288 CapInh bitmap of inheritable capabilities
289 CapPrm bitmap of permitted capabilities
290 CapEff bitmap of effective capabilities
291 CapBnd bitmap of capabilities bounding set
292 CapAmb bitmap of ambient capabilities
293 NoNewPrivs no_new_privs, like prctl(PR_GET_NO_NEW_PRIV, ...)
294 Seccomp seccomp mode, like prctl(PR_GET_SECCOMP, ...)
295 Speculation_Store_Bypass speculative store bypass mitigation status
296 SpeculationIndirectBranch indirect branch speculation mode
297 Cpus_allowed mask of CPUs on which this process may run
298 Cpus_allowed_list Same as previous, but in "list format"
299 Mems_allowed mask of memory nodes allowed to this process
300 Mems_allowed_list Same as previous, but in "list format"
301 voluntary_ctxt_switches number of voluntary context switches
302 nonvoluntary_ctxt_switches number of non voluntary context switches
303 ========================== ===================================================
306 .. table:: Table 1-3: Contents of the statm files (as of 2.6.8-rc3)
308 ======== =============================== ==============================
310 ======== =============================== ==============================
311 size total program size (pages) (same as VmSize in status)
312 resident size of memory portions (pages) (same as VmRSS in status)
313 shared number of pages that are shared (i.e. backed by a file, same
314 as RssFile+RssShmem in status)
315 trs number of pages that are 'code' (not including libs; broken,
316 includes data segment)
317 lrs number of pages of library (always 0 on 2.6)
318 drs number of pages of data/stack (including libs; broken,
319 includes library text)
320 dt number of dirty pages (always 0 on 2.6)
321 ======== =============================== ==============================
324 .. table:: Table 1-4: Contents of the stat files (as of 2.6.30-rc7)
326 ============= ===============================================================
328 ============= ===============================================================
330 tcomm filename of the executable
331 state state (R is running, S is sleeping, D is sleeping in an
332 uninterruptible wait, Z is zombie, T is traced or stopped)
333 ppid process id of the parent process
334 pgrp pgrp of the process
336 tty_nr tty the process uses
337 tty_pgrp pgrp of the tty
339 min_flt number of minor faults
340 cmin_flt number of minor faults with child's
341 maj_flt number of major faults
342 cmaj_flt number of major faults with child's
343 utime user mode jiffies
344 stime kernel mode jiffies
345 cutime user mode jiffies with child's
346 cstime kernel mode jiffies with child's
347 priority priority level
349 num_threads number of threads
350 it_real_value (obsolete, always 0)
351 start_time time the process started after system boot
352 vsize virtual memory size
353 rss resident set memory size
354 rsslim current limit in bytes on the rss
355 start_code address above which program text can run
356 end_code address below which program text can run
357 start_stack address of the start of the main process stack
358 esp current value of ESP
359 eip current value of EIP
360 pending bitmap of pending signals
361 blocked bitmap of blocked signals
362 sigign bitmap of ignored signals
363 sigcatch bitmap of caught signals
364 0 (place holder, used to be the wchan address,
365 use /proc/PID/wchan instead)
368 exit_signal signal to send to parent thread on exit
369 task_cpu which CPU the task is scheduled on
370 rt_priority realtime priority
371 policy scheduling policy (man sched_setscheduler)
372 blkio_ticks time spent waiting for block IO
373 gtime guest time of the task in jiffies
374 cgtime guest time of the task children in jiffies
375 start_data address above which program data+bss is placed
376 end_data address below which program data+bss is placed
377 start_brk address above which program heap can be expanded with brk()
378 arg_start address above which program command line is placed
379 arg_end address below which program command line is placed
380 env_start address above which program environment is placed
381 env_end address below which program environment is placed
382 exit_code the thread's exit_code in the form reported by the waitpid
384 ============= ===============================================================
386 The /proc/PID/maps file contains the currently mapped memory regions and
387 their access permissions.
391 address perms offset dev inode pathname
393 08048000-08049000 r-xp 00000000 03:00 8312 /opt/test
394 08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test
395 0804a000-0806b000 rw-p 00000000 00:00 0 [heap]
396 a7cb1000-a7cb2000 ---p 00000000 00:00 0
397 a7cb2000-a7eb2000 rw-p 00000000 00:00 0
398 a7eb2000-a7eb3000 ---p 00000000 00:00 0
399 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
400 a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6
401 a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6
402 a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6
403 a800b000-a800e000 rw-p 00000000 00:00 0
404 a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0
405 a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0
406 a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0
407 a8024000-a8027000 rw-p 00000000 00:00 0
408 a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2
409 a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2
410 a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2
411 aff35000-aff4a000 rw-p 00000000 00:00 0 [stack]
412 ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso]
414 where "address" is the address space in the process that it occupies, "perms"
415 is a set of permissions::
421 p = private (copy on write)
423 "offset" is the offset into the mapping, "dev" is the device (major:minor), and
424 "inode" is the inode on that device. 0 indicates that no inode is associated
425 with the memory region, as the case would be with BSS (uninitialized data).
426 The "pathname" shows the name associated file for this mapping. If the mapping
427 is not associated with a file:
429 ======= ====================================
430 [heap] the heap of the program
431 [stack] the stack of the main process
432 [vdso] the "virtual dynamic shared object",
433 the kernel system call handler
434 ======= ====================================
436 or if empty, the mapping is anonymous.
438 The /proc/PID/smaps is an extension based on maps, showing the memory
439 consumption for each of the process's mappings. For each mapping (aka Virtual
440 Memory Area, or VMA) there is a series of lines such as the following::
442 08048000-080bc000 r-xp 00000000 03:02 13130 /bin/bash
459 Private_Hugetlb: 0 kB
466 VmFlags: rd ex mr mw me dw
468 The first of these lines shows the same information as is displayed for the
469 mapping in /proc/PID/maps. Following lines show the size of the mapping
470 (size); the size of each page allocated when backing a VMA (KernelPageSize),
471 which is usually the same as the size in the page table entries; the page size
472 used by the MMU when backing a VMA (in most cases, the same as KernelPageSize);
473 the amount of the mapping that is currently resident in RAM (RSS); the
474 process' proportional share of this mapping (PSS); and the number of clean and
475 dirty shared and private pages in the mapping.
477 The "proportional set size" (PSS) of a process is the count of pages it has
478 in memory, where each page is divided by the number of processes sharing it.
479 So if a process has 1000 pages all to itself, and 1000 shared with one other
480 process, its PSS will be 1500.
482 Note that even a page which is part of a MAP_SHARED mapping, but has only
483 a single pte mapped, i.e. is currently used by only one process, is accounted
484 as private and not as shared.
486 "Referenced" indicates the amount of memory currently marked as referenced or
489 "Anonymous" shows the amount of memory that does not belong to any file. Even
490 a mapping associated with a file may contain anonymous pages: when MAP_PRIVATE
491 and a page is modified, the file page is replaced by a private anonymous copy.
493 "LazyFree" shows the amount of memory which is marked by madvise(MADV_FREE).
494 The memory isn't freed immediately with madvise(). It's freed in memory
495 pressure if the memory is clean. Please note that the printed value might
496 be lower than the real value due to optimizations used in the current
497 implementation. If this is not desirable please file a bug report.
499 "AnonHugePages" shows the ammount of memory backed by transparent hugepage.
501 "ShmemPmdMapped" shows the ammount of shared (shmem/tmpfs) memory backed by
504 "Shared_Hugetlb" and "Private_Hugetlb" show the ammounts of memory backed by
505 hugetlbfs page which is *not* counted in "RSS" or "PSS" field for historical
506 reasons. And these are not included in {Shared,Private}_{Clean,Dirty} field.
508 "Swap" shows how much would-be-anonymous memory is also used, but out on swap.
510 For shmem mappings, "Swap" includes also the size of the mapped (and not
511 replaced by copy-on-write) part of the underlying shmem object out on swap.
512 "SwapPss" shows proportional swap share of this mapping. Unlike "Swap", this
513 does not take into account swapped out page of underlying shmem objects.
514 "Locked" indicates whether the mapping is locked in memory or not.
515 "THPeligible" indicates whether the mapping is eligible for allocating THP
516 pages - 1 if true, 0 otherwise. It just shows the current status.
518 "VmFlags" field deserves a separate description. This member represents the
519 kernel flags associated with the particular virtual memory area in two letter
520 encoded manner. The codes are the following:
522 == =======================================
531 gd stack segment growns down
533 dw disabled write to the mapped file
534 lo pages are locked in memory
535 io memory mapped I/O area
536 sr sequential read advise provided
537 rr random read advise provided
538 dc do not copy area on fork
539 de do not expand area on remapping
540 ac area is accountable
541 nr swap space is not reserved for the area
542 ht area uses huge tlb pages
543 ar architecture specific flag
544 dd do not include area into core dump
547 hg huge page advise flag
548 nh no huge page advise flag
549 mg mergable advise flag
550 bt arm64 BTI guarded page
551 mt arm64 MTE allocation tags are enabled
552 == =======================================
554 Note that there is no guarantee that every flag and associated mnemonic will
555 be present in all further kernel releases. Things get changed, the flags may
556 be vanished or the reverse -- new added. Interpretation of their meaning
557 might change in future as well. So each consumer of these flags has to
558 follow each specific kernel version for the exact semantic.
560 This file is only present if the CONFIG_MMU kernel configuration option is
563 Note: reading /proc/PID/maps or /proc/PID/smaps is inherently racy (consistent
564 output can be achieved only in the single read call).
566 This typically manifests when doing partial reads of these files while the
567 memory map is being modified. Despite the races, we do provide the following
570 1) The mapped addresses never go backwards, which implies no two
571 regions will ever overlap.
572 2) If there is something at a given vaddr during the entirety of the
573 life of the smaps/maps walk, there will be some output for it.
575 The /proc/PID/smaps_rollup file includes the same fields as /proc/PID/smaps,
576 but their values are the sums of the corresponding values for all mappings of
577 the process. Additionally, it contains these fields:
583 They represent the proportional shares of anonymous, file, and shmem pages, as
584 described for smaps above. These fields are omitted in smaps since each
585 mapping identifies the type (anon, file, or shmem) of all pages it contains.
586 Thus all information in smaps_rollup can be derived from smaps, but at a
587 significantly higher cost.
589 The /proc/PID/clear_refs is used to reset the PG_Referenced and ACCESSED/YOUNG
590 bits on both physical and virtual pages associated with a process, and the
591 soft-dirty bit on pte (see Documentation/admin-guide/mm/soft-dirty.rst
593 To clear the bits for all the pages associated with the process::
595 > echo 1 > /proc/PID/clear_refs
597 To clear the bits for the anonymous pages associated with the process::
599 > echo 2 > /proc/PID/clear_refs
601 To clear the bits for the file mapped pages associated with the process::
603 > echo 3 > /proc/PID/clear_refs
605 To clear the soft-dirty bit::
607 > echo 4 > /proc/PID/clear_refs
609 To reset the peak resident set size ("high water mark") to the process's
612 > echo 5 > /proc/PID/clear_refs
614 Any other value written to /proc/PID/clear_refs will have no effect.
616 The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags
617 using /proc/kpageflags and number of times a page is mapped using
618 /proc/kpagecount. For detailed explanation, see
619 Documentation/admin-guide/mm/pagemap.rst.
621 The /proc/pid/numa_maps is an extension based on maps, showing the memory
622 locality and binding policy, as well as the memory usage (in pages) of
623 each mapping. The output follows a general format where mapping details get
624 summarized separated by blank spaces, one mapping per each file line::
626 address policy mapping details
628 00400000 default file=/usr/local/bin/app mapped=1 active=0 N3=1 kernelpagesize_kB=4
629 00600000 default file=/usr/local/bin/app anon=1 dirty=1 N3=1 kernelpagesize_kB=4
630 3206000000 default file=/lib64/ld-2.12.so mapped=26 mapmax=6 N0=24 N3=2 kernelpagesize_kB=4
631 320621f000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
632 3206220000 default file=/lib64/ld-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
633 3206221000 default anon=1 dirty=1 N3=1 kernelpagesize_kB=4
634 3206800000 default file=/lib64/libc-2.12.so mapped=59 mapmax=21 active=55 N0=41 N3=18 kernelpagesize_kB=4
635 320698b000 default file=/lib64/libc-2.12.so
636 3206b8a000 default file=/lib64/libc-2.12.so anon=2 dirty=2 N3=2 kernelpagesize_kB=4
637 3206b8e000 default file=/lib64/libc-2.12.so anon=1 dirty=1 N3=1 kernelpagesize_kB=4
638 3206b8f000 default anon=3 dirty=3 active=1 N3=3 kernelpagesize_kB=4
639 7f4dc10a2000 default anon=3 dirty=3 N3=3 kernelpagesize_kB=4
640 7f4dc10b4000 default anon=2 dirty=2 active=1 N3=2 kernelpagesize_kB=4
641 7f4dc1200000 default file=/anon_hugepage\040(deleted) huge anon=1 dirty=1 N3=1 kernelpagesize_kB=2048
642 7fff335f0000 default stack anon=3 dirty=3 N3=3 kernelpagesize_kB=4
643 7fff3369d000 default mapped=1 mapmax=35 active=0 N3=1 kernelpagesize_kB=4
647 "address" is the starting address for the mapping;
649 "policy" reports the NUMA memory policy set for the mapping (see Documentation/admin-guide/mm/numa_memory_policy.rst);
651 "mapping details" summarizes mapping data such as mapping type, page usage counters,
652 node locality page counters (N0 == node0, N1 == node1, ...) and the kernel page
653 size, in KB, that is backing the mapping up.
658 Similar to the process entries, the kernel data files give information about
659 the running kernel. The files used to obtain this information are contained in
660 /proc and are listed in Table 1-5. Not all of these will be present in your
661 system. It depends on the kernel configuration and the loaded modules, which
662 files are there, and which are missing.
664 .. table:: Table 1-5: Kernel info in /proc
666 ============ ===============================================================
668 ============ ===============================================================
669 apm Advanced power management info
670 buddyinfo Kernel memory allocator information (see text) (2.5)
671 bus Directory containing bus specific information
672 cmdline Kernel command line
673 cpuinfo Info about the CPU
674 devices Available devices (block and character)
675 dma Used DMS channels
676 filesystems Supported filesystems
677 driver Various drivers grouped here, currently rtc (2.4)
678 execdomains Execdomains, related to security (2.4)
679 fb Frame Buffer devices (2.4)
680 fs File system parameters, currently nfs/exports (2.4)
681 ide Directory containing info about the IDE subsystem
682 interrupts Interrupt usage
683 iomem Memory map (2.4)
684 ioports I/O port usage
685 irq Masks for irq to cpu affinity (2.4)(smp?)
686 isapnp ISA PnP (Plug&Play) Info (2.4)
687 kcore Kernel core image (can be ELF or A.OUT(deprecated in 2.4))
689 ksyms Kernel symbol table
690 loadavg Load average of last 1, 5 & 15 minutes;
691 number of processes currently runnable (running or on ready queue);
692 total number of processes in system;
694 All fields are separated by one space except "number of
695 processes currently runnable" and "total number of processes
696 in system", which are separated by a slash ('/'). Example:
697 0.61 0.61 0.55 3/828 22084
701 modules List of loaded modules
702 mounts Mounted filesystems
703 net Networking info (see text)
704 pagetypeinfo Additional page allocator information (see text) (2.5)
705 partitions Table of partitions known to the system
706 pci Deprecated info of PCI bus (new way -> /proc/bus/pci/,
707 decoupled by lspci (2.4)
709 scsi SCSI info (see text)
710 slabinfo Slab pool info
711 softirqs softirq usage
712 stat Overall statistics
713 swaps Swap space utilization
715 sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
716 tty Info of tty drivers
717 uptime Wall clock since boot, combined idle time of all cpus
718 version Kernel version
719 video bttv info of video resources (2.4)
720 vmallocinfo Show vmalloced areas
721 ============ ===============================================================
723 You can, for example, check which interrupts are currently in use and what
724 they are used for by looking in the file /proc/interrupts::
726 > cat /proc/interrupts
728 0: 8728810 XT-PIC timer
729 1: 895 XT-PIC keyboard
731 3: 531695 XT-PIC aha152x
732 4: 2014133 XT-PIC serial
733 5: 44401 XT-PIC pcnet_cs
736 12: 182918 XT-PIC PS/2 Mouse
738 14: 1232265 XT-PIC ide0
742 In 2.4.* a couple of lines where added to this file LOC & ERR (this time is the
743 output of a SMP machine)::
745 > cat /proc/interrupts
748 0: 1243498 1214548 IO-APIC-edge timer
749 1: 8949 8958 IO-APIC-edge keyboard
750 2: 0 0 XT-PIC cascade
751 5: 11286 10161 IO-APIC-edge soundblaster
752 8: 1 0 IO-APIC-edge rtc
753 9: 27422 27407 IO-APIC-edge 3c503
754 12: 113645 113873 IO-APIC-edge PS/2 Mouse
756 14: 22491 24012 IO-APIC-edge ide0
757 15: 2183 2415 IO-APIC-edge ide1
758 17: 30564 30414 IO-APIC-level eth0
759 18: 177 164 IO-APIC-level bttv
764 NMI is incremented in this case because every timer interrupt generates a NMI
765 (Non Maskable Interrupt) which is used by the NMI Watchdog to detect lockups.
767 LOC is the local interrupt counter of the internal APIC of every CPU.
769 ERR is incremented in the case of errors in the IO-APIC bus (the bus that
770 connects the CPUs in a SMP system. This means that an error has been detected,
771 the IO-APIC automatically retry the transmission, so it should not be a big
772 problem, but you should read the SMP-FAQ.
774 In 2.6.2* /proc/interrupts was expanded again. This time the goal was for
775 /proc/interrupts to display every IRQ vector in use by the system, not
776 just those considered 'most important'. The new vectors are:
779 interrupt raised when a machine check threshold counter
780 (typically counting ECC corrected errors of memory or cache) exceeds
781 a configurable threshold. Only available on some systems.
784 a thermal event interrupt occurs when a temperature threshold
785 has been exceeded for the CPU. This interrupt may also be generated
786 when the temperature drops back to normal.
789 a spurious interrupt is some interrupt that was raised then lowered
790 by some IO device before it could be fully processed by the APIC. Hence
791 the APIC sees the interrupt but does not know what device it came from.
792 For this case the APIC will generate the interrupt with a IRQ vector
793 of 0xff. This might also be generated by chipset bugs.
796 rescheduling, call and TLB flush interrupts are
797 sent from one CPU to another per the needs of the OS. Typically,
798 their statistics are used by kernel developers and interested users to
799 determine the occurrence of interrupts of the given type.
801 The above IRQ vectors are displayed only when relevant. For example,
802 the threshold vector does not exist on x86_64 platforms. Others are
803 suppressed when the system is a uniprocessor. As of this writing, only
804 i386 and x86_64 platforms support the new IRQ vector displays.
806 Of some interest is the introduction of the /proc/irq directory to 2.4.
807 It could be used to set IRQ to CPU affinity. This means that you can "hook" an
808 IRQ to only one CPU, or to exclude a CPU of handling IRQs. The contents of the
809 irq subdir is one subdir for each IRQ, and two files; default_smp_affinity and
815 0 10 12 14 16 18 2 4 6 8 prof_cpu_mask
816 1 11 13 15 17 19 3 5 7 9 default_smp_affinity
820 smp_affinity is a bitmask, in which you can specify which CPUs can handle the
821 IRQ. You can set it by doing::
823 > echo 1 > /proc/irq/10/smp_affinity
825 This means that only the first CPU will handle the IRQ, but you can also echo
826 5 which means that only the first and third CPU can handle the IRQ.
828 The contents of each smp_affinity file is the same by default::
830 > cat /proc/irq/0/smp_affinity
833 There is an alternate interface, smp_affinity_list which allows specifying
834 a CPU range instead of a bitmask::
836 > cat /proc/irq/0/smp_affinity_list
839 The default_smp_affinity mask applies to all non-active IRQs, which are the
840 IRQs which have not yet been allocated/activated, and hence which lack a
841 /proc/irq/[0-9]* directory.
843 The node file on an SMP system shows the node to which the device using the IRQ
844 reports itself as being attached. This hardware locality information does not
845 include information about any possible driver locality preference.
847 prof_cpu_mask specifies which CPUs are to be profiled by the system wide
848 profiler. Default value is ffffffff (all CPUs if there are only 32 of them).
850 The way IRQs are routed is handled by the IO-APIC, and it's Round Robin
851 between all the CPUs which are allowed to handle it. As usual the kernel has
852 more info than you and does a better job than you, so the defaults are the
853 best choice for almost everyone. [Note this applies only to those IO-APIC's
854 that support "Round Robin" interrupt distribution.]
856 There are three more important subdirectories in /proc: net, scsi, and sys.
857 The general rule is that the contents, or even the existence of these
858 directories, depend on your kernel configuration. If SCSI is not enabled, the
859 directory scsi may not exist. The same is true with the net, which is there
860 only when networking support is present in the running kernel.
862 The slabinfo file gives information about memory usage at the slab level.
863 Linux uses slab pools for memory management above page level in version 2.2.
864 Commonly used objects have their own slab pool (such as network buffers,
865 directory cache, and so on).
869 > cat /proc/buddyinfo
871 Node 0, zone DMA 0 4 5 4 4 3 ...
872 Node 0, zone Normal 1 0 0 1 101 8 ...
873 Node 0, zone HighMem 2 0 0 1 1 0 ...
875 External fragmentation is a problem under some workloads, and buddyinfo is a
876 useful tool for helping diagnose these problems. Buddyinfo will give you a
877 clue as to how big an area you can safely allocate, or why a previous
880 Each column represents the number of pages of a certain order which are
881 available. In this case, there are 0 chunks of 2^0*PAGE_SIZE available in
882 ZONE_DMA, 4 chunks of 2^1*PAGE_SIZE in ZONE_DMA, 101 chunks of 2^4*PAGE_SIZE
883 available in ZONE_NORMAL, etc...
885 More information relevant to external fragmentation can be found in
888 > cat /proc/pagetypeinfo
892 Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10
893 Node 0, zone DMA, type Unmovable 0 0 0 1 1 1 1 1 1 1 0
894 Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0
895 Node 0, zone DMA, type Movable 1 1 2 1 2 1 1 0 1 0 2
896 Node 0, zone DMA, type Reserve 0 0 0 0 0 0 0 0 0 1 0
897 Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0
898 Node 0, zone DMA32, type Unmovable 103 54 77 1 1 1 11 8 7 1 9
899 Node 0, zone DMA32, type Reclaimable 0 0 2 1 0 0 0 0 1 0 0
900 Node 0, zone DMA32, type Movable 169 152 113 91 77 54 39 13 6 1 452
901 Node 0, zone DMA32, type Reserve 1 2 2 2 2 0 1 1 1 1 0
902 Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0
904 Number of blocks type Unmovable Reclaimable Movable Reserve Isolate
905 Node 0, zone DMA 2 0 5 1 0
906 Node 0, zone DMA32 41 6 967 2 0
908 Fragmentation avoidance in the kernel works by grouping pages of different
909 migrate types into the same contiguous regions of memory called page blocks.
910 A page block is typically the size of the default hugepage size, e.g. 2MB on
911 X86-64. By keeping pages grouped based on their ability to move, the kernel
912 can reclaim pages within a page block to satisfy a high-order allocation.
914 The pagetypinfo begins with information on the size of a page block. It
915 then gives the same type of information as buddyinfo except broken down
916 by migrate-type and finishes with details on how many page blocks of each
919 If min_free_kbytes has been tuned correctly (recommendations made by hugeadm
920 from libhugetlbfs https://github.com/libhugetlbfs/libhugetlbfs/), one can
921 make an estimate of the likely number of huge pages that can be allocated
922 at a given point in time. All the "Movable" blocks should be allocatable
923 unless memory has been mlock()'d. Some of the Reclaimable blocks should
924 also be allocatable although a lot of filesystem metadata may have to be
925 reclaimed to achieve this.
931 Provides information about distribution and utilization of memory. This
932 varies by architecture and compile options. The following is from a
933 16GB PIII, which has highmem enabled. You may not have all of these fields.
939 MemTotal: 16344972 kB
941 MemAvailable: 14836172 kB
947 HighTotal: 15597528 kB
948 HighFree: 13629632 kB
958 KReclaimable: 168048 kB
960 SReclaimable: 159856 kB
961 SUnreclaim: 124508 kB
966 CommitLimit: 7669796 kB
967 Committed_AS: 100056 kB
968 VmallocTotal: 112216 kB
970 VmallocChunk: 111088 kB
972 HardwareCorrupted: 0 kB
973 AnonHugePages: 49152 kB
978 Total usable RAM (i.e. physical RAM minus a few reserved
979 bits and the kernel binary code)
981 The sum of LowFree+HighFree
983 An estimate of how much memory is available for starting new
984 applications, without swapping. Calculated from MemFree,
985 SReclaimable, the size of the file LRU lists, and the low
986 watermarks in each zone.
987 The estimate takes into account that the system needs some
988 page cache to function well, and that not all reclaimable
989 slab will be reclaimable, due to items being in use. The
990 impact of those factors will vary from system to system.
992 Relatively temporary storage for raw disk blocks
993 shouldn't get tremendously large (20MB or so)
995 in-memory cache for files read from the disk (the
996 pagecache). Doesn't include SwapCached
998 Memory that once was swapped out, is swapped back in but
999 still also is in the swapfile (if memory is needed it
1000 doesn't need to be swapped out AGAIN because it is already
1001 in the swapfile. This saves I/O)
1003 Memory that has been used more recently and usually not
1004 reclaimed unless absolutely necessary.
1006 Memory which has been less recently used. It is more
1007 eligible to be reclaimed for other purposes
1009 Highmem is all memory above ~860MB of physical memory.
1010 Highmem areas are for use by userspace programs, or
1011 for the pagecache. The kernel must use tricks to access
1012 this memory, making it slower to access than lowmem.
1014 Lowmem is memory which can be used for everything that
1015 highmem can be used for, but it is also available for the
1016 kernel's use for its own data structures. Among many
1017 other things, it is where everything from the Slab is
1018 allocated. Bad things happen when you're out of lowmem.
1020 total amount of swap space available
1022 Memory which has been evicted from RAM, and is temporarily
1025 Memory which is waiting to get written back to the disk
1027 Memory which is actively being written back to the disk
1029 Non-file backed pages mapped into userspace page tables
1031 The amount of RAM/memory in KB, the kernel identifies as
1034 Non-file backed huge pages mapped into userspace page tables
1036 files which have been mmaped, such as libraries
1038 Total memory used by shared memory (shmem) and tmpfs
1040 Memory used by shared memory (shmem) and tmpfs allocated
1043 Shared memory mapped into userspace with huge pages
1045 Kernel allocations that the kernel will attempt to reclaim
1046 under memory pressure. Includes SReclaimable (below), and other
1047 direct allocations with a shrinker.
1049 in-kernel data structures cache
1051 Part of Slab, that might be reclaimed, such as caches
1053 Part of Slab, that cannot be reclaimed on memory pressure
1055 amount of memory dedicated to the lowest level of page
1058 Always zero. Previous counted pages which had been written to
1059 the server, but has not been committed to stable storage.
1061 Memory used for block device "bounce buffers"
1063 Memory used by FUSE for temporary writeback buffers
1065 Based on the overcommit ratio ('vm.overcommit_ratio'),
1066 this is the total amount of memory currently available to
1067 be allocated on the system. This limit is only adhered to
1068 if strict overcommit accounting is enabled (mode 2 in
1069 'vm.overcommit_memory').
1071 The CommitLimit is calculated with the following formula::
1073 CommitLimit = ([total RAM pages] - [total huge TLB pages]) *
1074 overcommit_ratio / 100 + [total swap pages]
1076 For example, on a system with 1G of physical RAM and 7G
1077 of swap with a `vm.overcommit_ratio` of 30 it would
1078 yield a CommitLimit of 7.3G.
1080 For more details, see the memory overcommit documentation
1081 in vm/overcommit-accounting.
1083 The amount of memory presently allocated on the system.
1084 The committed memory is a sum of all of the memory which
1085 has been allocated by processes, even if it has not been
1086 "used" by them as of yet. A process which malloc()'s 1G
1087 of memory, but only touches 300M of it will show up as
1088 using 1G. This 1G is memory which has been "committed" to
1089 by the VM and can be used at any time by the allocating
1090 application. With strict overcommit enabled on the system
1091 (mode 2 in 'vm.overcommit_memory'), allocations which would
1092 exceed the CommitLimit (detailed above) will not be permitted.
1093 This is useful if one needs to guarantee that processes will
1094 not fail due to lack of memory once that memory has been
1095 successfully allocated.
1097 total size of vmalloc memory area
1099 amount of vmalloc area which is used
1101 largest contiguous block of vmalloc area which is free
1103 Memory allocated to the percpu allocator used to back percpu
1104 allocations. This stat excludes the cost of metadata.
1109 Provides information about vmalloced/vmaped areas. One line per area,
1110 containing the virtual address range of the area, size in bytes,
1111 caller information of the creator, and optional information depending
1112 on the kind of area:
1114 ========== ===================================================
1115 pages=nr number of pages
1116 phys=addr if a physical address was specified
1117 ioremap I/O mapping (ioremap() and friends)
1118 vmalloc vmalloc() area
1120 user VM_USERMAP area
1121 vpages buffer for pages pointers was vmalloced (huge area)
1122 N<node>=nr (Only on NUMA kernels)
1123 Number of pages allocated on memory node <node>
1124 ========== ===================================================
1128 > cat /proc/vmallocinfo
1129 0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204 ...
1130 /0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
1131 0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204 ...
1132 /0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
1133 0xffffc20000302000-0xffffc20000304000 8192 acpi_tb_verify_table+0x21/0x4f...
1134 phys=7fee8000 ioremap
1135 0xffffc20000304000-0xffffc20000307000 12288 acpi_tb_verify_table+0x21/0x4f...
1136 phys=7fee7000 ioremap
1137 0xffffc2000031d000-0xffffc2000031f000 8192 init_vdso_vars+0x112/0x210
1138 0xffffc2000031f000-0xffffc2000032b000 49152 cramfs_uncompress_init+0x2e ...
1139 /0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
1140 0xffffc2000033a000-0xffffc2000033d000 12288 sys_swapon+0x640/0xac0 ...
1141 pages=2 vmalloc N1=2
1142 0xffffc20000347000-0xffffc2000034c000 20480 xt_alloc_table_info+0xfe ...
1143 /0x130 [x_tables] pages=4 vmalloc N0=4
1144 0xffffffffa0000000-0xffffffffa000f000 61440 sys_init_module+0xc27/0x1d00 ...
1145 pages=14 vmalloc N2=14
1146 0xffffffffa000f000-0xffffffffa0014000 20480 sys_init_module+0xc27/0x1d00 ...
1147 pages=4 vmalloc N1=4
1148 0xffffffffa0014000-0xffffffffa0017000 12288 sys_init_module+0xc27/0x1d00 ...
1149 pages=2 vmalloc N1=2
1150 0xffffffffa0017000-0xffffffffa0022000 45056 sys_init_module+0xc27/0x1d00 ...
1151 pages=10 vmalloc N0=10
1157 Provides counts of softirq handlers serviced since boot time, for each CPU.
1161 > cat /proc/softirqs
1164 TIMER: 27166 27120 27097 27034
1169 SCHED: 27035 26983 26971 26746
1171 RCU: 1678 1769 2178 2250
1174 1.3 IDE devices in /proc/ide
1175 ----------------------------
1177 The subdirectory /proc/ide contains information about all IDE devices of which
1178 the kernel is aware. There is one subdirectory for each IDE controller, the
1179 file drivers and a link for each IDE device, pointing to the device directory
1180 in the controller specific subtree.
1182 The file 'drivers' contains general information about the drivers used for the
1185 > cat /proc/ide/drivers
1186 ide-cdrom version 4.53
1187 ide-disk version 1.08
1189 More detailed information can be found in the controller specific
1190 subdirectories. These are named ide0, ide1 and so on. Each of these
1191 directories contains the files shown in table 1-6.
1194 .. table:: Table 1-6: IDE controller info in /proc/ide/ide?
1196 ======= =======================================
1198 ======= =======================================
1199 channel IDE channel (0 or 1)
1200 config Configuration (only for PCI/IDE bridge)
1202 model Type/Chipset of IDE controller
1203 ======= =======================================
1205 Each device connected to a controller has a separate subdirectory in the
1206 controllers directory. The files listed in table 1-7 are contained in these
1210 .. table:: Table 1-7: IDE device information
1212 ================ ==========================================
1214 ================ ==========================================
1216 capacity Capacity of the medium (in 512Byte blocks)
1217 driver driver and version
1218 geometry physical and logical geometry
1219 identify device identify block
1221 model device identifier
1222 settings device setup
1223 smart_thresholds IDE disk management thresholds
1224 smart_values IDE disk management values
1225 ================ ==========================================
1227 The most interesting file is ``settings``. This file contains a nice
1228 overview of the drive parameters::
1230 # cat /proc/ide/ide0/hda/settings
1231 name value min max mode
1232 ---- ----- --- --- ----
1233 bios_cyl 526 0 65535 rw
1234 bios_head 255 0 255 rw
1235 bios_sect 63 0 63 rw
1236 breada_readahead 4 0 127 rw
1238 file_readahead 72 0 2097151 rw
1240 keepsettings 0 0 1 rw
1241 max_kb_per_request 122 1 127 rw
1245 pio_mode write-only 0 255 w
1251 1.4 Networking info in /proc/net
1252 --------------------------------
1254 The subdirectory /proc/net follows the usual pattern. Table 1-8 shows the
1255 additional values you get for IP version 6 if you configure the kernel to
1256 support this. Table 1-9 lists the files and their meaning.
1259 .. table:: Table 1-8: IPv6 info in /proc/net
1261 ========== =====================================================
1263 ========== =====================================================
1264 udp6 UDP sockets (IPv6)
1265 tcp6 TCP sockets (IPv6)
1266 raw6 Raw device statistics (IPv6)
1267 igmp6 IP multicast addresses, which this host joined (IPv6)
1268 if_inet6 List of IPv6 interface addresses
1269 ipv6_route Kernel routing table for IPv6
1270 rt6_stats Global IPv6 routing tables statistics
1271 sockstat6 Socket statistics (IPv6)
1272 snmp6 Snmp data (IPv6)
1273 ========== =====================================================
1275 .. table:: Table 1-9: Network info in /proc/net
1277 ============= ================================================================
1279 ============= ================================================================
1280 arp Kernel ARP table
1281 dev network devices with statistics
1282 dev_mcast the Layer2 multicast groups a device is listening too
1283 (interface index, label, number of references, number of bound
1285 dev_stat network device status
1286 ip_fwchains Firewall chain linkage
1287 ip_fwnames Firewall chain names
1288 ip_masq Directory containing the masquerading tables
1289 ip_masquerade Major masquerading table
1290 netstat Network statistics
1291 raw raw device statistics
1292 route Kernel routing table
1293 rpc Directory containing rpc info
1294 rt_cache Routing cache
1296 sockstat Socket statistics
1299 unix UNIX domain sockets
1300 wireless Wireless interface data (Wavelan etc)
1301 igmp IP multicast addresses, which this host joined
1302 psched Global packet scheduler parameters.
1303 netlink List of PF_NETLINK sockets
1304 ip_mr_vifs List of multicast virtual interfaces
1305 ip_mr_cache List of multicast routing cache
1306 ============= ================================================================
1308 You can use this information to see which network devices are available in
1309 your system and how much traffic was routed over those devices::
1312 Inter-|Receive |[...
1313 face |bytes packets errs drop fifo frame compressed multicast|[...
1314 lo: 908188 5596 0 0 0 0 0 0 [...
1315 ppp0:15475140 20721 410 0 0 410 0 0 [...
1316 eth0: 614530 7085 0 0 0 0 0 1 [...
1319 ...] bytes packets errs drop fifo colls carrier compressed
1320 ...] 908188 5596 0 0 0 0 0 0
1321 ...] 1375103 17405 0 0 0 0 0 0
1322 ...] 1703981 5535 0 0 0 3 0 0
1324 In addition, each Channel Bond interface has its own directory. For
1325 example, the bond0 device will have a directory called /proc/net/bond0/.
1326 It will contain information that is specific to that bond, such as the
1327 current slaves of the bond, the link status of the slaves, and how
1328 many times the slaves link has failed.
1333 If you have a SCSI host adapter in your system, you'll find a subdirectory
1334 named after the driver for this adapter in /proc/scsi. You'll also see a list
1335 of all recognized SCSI devices in /proc/scsi::
1337 >cat /proc/scsi/scsi
1339 Host: scsi0 Channel: 00 Id: 00 Lun: 00
1340 Vendor: IBM Model: DGHS09U Rev: 03E0
1341 Type: Direct-Access ANSI SCSI revision: 03
1342 Host: scsi0 Channel: 00 Id: 06 Lun: 00
1343 Vendor: PIONEER Model: CD-ROM DR-U06S Rev: 1.04
1344 Type: CD-ROM ANSI SCSI revision: 02
1347 The directory named after the driver has one file for each adapter found in
1348 the system. These files contain information about the controller, including
1349 the used IRQ and the IO address range. The amount of information shown is
1350 dependent on the adapter you use. The example shows the output for an Adaptec
1351 AHA-2940 SCSI adapter::
1353 > cat /proc/scsi/aic7xxx/0
1355 Adaptec AIC7xxx driver version: 5.1.19/3.2.4
1357 TCQ Enabled By Default : Disabled
1358 AIC7XXX_PROC_STATS : Disabled
1359 AIC7XXX_RESET_DELAY : 5
1360 Adapter Configuration:
1361 SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
1362 Ultra Wide Controller
1363 PCI MMAPed I/O Base: 0xeb001000
1364 Adapter SEEPROM Config: SEEPROM found and used.
1365 Adaptec SCSI BIOS: Enabled
1367 SCBs: Active 0, Max Active 2,
1368 Allocated 15, HW 16, Page 255
1370 BIOS Control Word: 0x18b6
1371 Adapter Control Word: 0x005b
1372 Extended Translation: Enabled
1373 Disconnect Enable Flags: 0xffff
1374 Ultra Enable Flags: 0x0001
1375 Tag Queue Enable Flags: 0x0000
1376 Ordered Queue Tag Flags: 0x0000
1377 Default Tag Queue Depth: 8
1378 Tagged Queue By Device array for aic7xxx host instance 0:
1379 {255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
1380 Actual queue depth per device for aic7xxx host instance 0:
1381 {1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}
1384 Device using Wide/Sync transfers at 40.0 MByte/sec, offset 8
1385 Transinfo settings: current(12/8/1/0), goal(12/8/1/0), user(12/15/1/0)
1386 Total transfers 160151 (74577 reads and 85574 writes)
1388 Device using Narrow/Sync transfers at 5.0 MByte/sec, offset 15
1389 Transinfo settings: current(50/15/0/0), goal(50/15/0/0), user(50/15/0/0)
1390 Total transfers 0 (0 reads and 0 writes)
1393 1.6 Parallel port info in /proc/parport
1394 ---------------------------------------
1396 The directory /proc/parport contains information about the parallel ports of
1397 your system. It has one subdirectory for each port, named after the port
1400 These directories contain the four files shown in Table 1-10.
1403 .. table:: Table 1-10: Files in /proc/parport
1405 ========= ====================================================================
1407 ========= ====================================================================
1408 autoprobe Any IEEE-1284 device ID information that has been acquired.
1409 devices list of the device drivers using that port. A + will appear by the
1410 name of the device currently using the port (it might not appear
1412 hardware Parallel port's base address, IRQ line and DMA channel.
1413 irq IRQ that parport is using for that port. This is in a separate
1414 file to allow you to alter it by writing a new value in (IRQ
1416 ========= ====================================================================
1418 1.7 TTY info in /proc/tty
1419 -------------------------
1421 Information about the available and actually used tty's can be found in the
1422 directory /proc/tty. You'll find entries for drivers and line disciplines in
1423 this directory, as shown in Table 1-11.
1426 .. table:: Table 1-11: Files in /proc/tty
1428 ============= ==============================================
1430 ============= ==============================================
1431 drivers list of drivers and their usage
1432 ldiscs registered line disciplines
1433 driver/serial usage statistic and status of single tty lines
1434 ============= ==============================================
1436 To see which tty's are currently in use, you can simply look into the file
1439 > cat /proc/tty/drivers
1440 pty_slave /dev/pts 136 0-255 pty:slave
1441 pty_master /dev/ptm 128 0-255 pty:master
1442 pty_slave /dev/ttyp 3 0-255 pty:slave
1443 pty_master /dev/pty 2 0-255 pty:master
1444 serial /dev/cua 5 64-67 serial:callout
1445 serial /dev/ttyS 4 64-67 serial
1446 /dev/tty0 /dev/tty0 4 0 system:vtmaster
1447 /dev/ptmx /dev/ptmx 5 2 system
1448 /dev/console /dev/console 5 1 system:console
1449 /dev/tty /dev/tty 5 0 system:/dev/tty
1450 unknown /dev/tty 4 1-63 console
1453 1.8 Miscellaneous kernel statistics in /proc/stat
1454 -------------------------------------------------
1456 Various pieces of information about kernel activity are available in the
1457 /proc/stat file. All of the numbers reported in this file are aggregates
1458 since the system first booted. For a quick look, simply cat the file::
1461 cpu 2255 34 2290 22625563 6290 127 456 0 0 0
1462 cpu0 1132 34 1441 11311718 3675 127 438 0 0 0
1463 cpu1 1123 0 849 11313845 2614 0 18 0 0 0
1464 intr 114930548 113199788 3 0 5 263 0 4 [... lots more numbers ...]
1470 softirq 183433 0 21755 12 39 1137 231 21459 2263
1472 The very first "cpu" line aggregates the numbers in all of the other "cpuN"
1473 lines. These numbers identify the amount of time the CPU has spent performing
1474 different kinds of work. Time units are in USER_HZ (typically hundredths of a
1475 second). The meanings of the columns are as follows, from left to right:
1477 - user: normal processes executing in user mode
1478 - nice: niced processes executing in user mode
1479 - system: processes executing in kernel mode
1480 - idle: twiddling thumbs
1481 - iowait: In a word, iowait stands for waiting for I/O to complete. But there
1482 are several problems:
1484 1. CPU will not wait for I/O to complete, iowait is the time that a task is
1485 waiting for I/O to complete. When CPU goes into idle state for
1486 outstanding task I/O, another task will be scheduled on this CPU.
1487 2. In a multi-core CPU, the task waiting for I/O to complete is not running
1488 on any CPU, so the iowait of each CPU is difficult to calculate.
1489 3. The value of iowait field in /proc/stat will decrease in certain
1492 So, the iowait is not reliable by reading from /proc/stat.
1493 - irq: servicing interrupts
1494 - softirq: servicing softirqs
1495 - steal: involuntary wait
1496 - guest: running a normal guest
1497 - guest_nice: running a niced guest
1499 The "intr" line gives counts of interrupts serviced since boot time, for each
1500 of the possible system interrupts. The first column is the total of all
1501 interrupts serviced including unnumbered architecture specific interrupts;
1502 each subsequent column is the total for that particular numbered interrupt.
1503 Unnumbered interrupts are not shown, only summed into the total.
1505 The "ctxt" line gives the total number of context switches across all CPUs.
1507 The "btime" line gives the time at which the system booted, in seconds since
1510 The "processes" line gives the number of processes and threads created, which
1511 includes (but is not limited to) those created by calls to the fork() and
1512 clone() system calls.
1514 The "procs_running" line gives the total number of threads that are
1515 running or ready to run (i.e., the total number of runnable threads).
1517 The "procs_blocked" line gives the number of processes currently blocked,
1518 waiting for I/O to complete.
1520 The "softirq" line gives counts of softirqs serviced since boot time, for each
1521 of the possible system softirqs. The first column is the total of all
1522 softirqs serviced; each subsequent column is the total for that particular
1526 1.9 Ext4 file system parameters
1527 -------------------------------
1529 Information about mounted ext4 file systems can be found in
1530 /proc/fs/ext4. Each mounted filesystem will have a directory in
1531 /proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
1532 /proc/fs/ext4/dm-0). The files in each per-device directory are shown
1533 in Table 1-12, below.
1535 .. table:: Table 1-12: Files in /proc/fs/ext4/<devname>
1537 ============== ==========================================================
1539 mb_groups details of multiblock allocator buddy cache of free blocks
1540 ============== ==========================================================
1544 Shows registered system console lines.
1546 To see which character device lines are currently used for the system console
1547 /dev/console, you may simply look into the file /proc/consoles::
1549 > cat /proc/consoles
1555 +--------------------+-------------------------------------------------------+
1556 | device | name of the device |
1557 +====================+=======================================================+
1558 | operations | * R = can do read operations |
1559 | | * W = can do write operations |
1560 | | * U = can do unblank |
1561 +--------------------+-------------------------------------------------------+
1562 | flags | * E = it is enabled |
1563 | | * C = it is preferred console |
1564 | | * B = it is primary boot console |
1565 | | * p = it is used for printk buffer |
1566 | | * b = it is not a TTY but a Braille device |
1567 | | * a = it is safe to use when cpu is offline |
1568 +--------------------+-------------------------------------------------------+
1569 | major:minor | major and minor number of the device separated by a |
1571 +--------------------+-------------------------------------------------------+
1576 The /proc file system serves information about the running system. It not only
1577 allows access to process data but also allows you to request the kernel status
1578 by reading files in the hierarchy.
1580 The directory structure of /proc reflects the types of information and makes
1581 it easy, if not obvious, where to look for specific data.
1583 Chapter 2: Modifying System Parameters
1584 ======================================
1589 * Modifying kernel parameters by writing into files found in /proc/sys
1590 * Exploring the files which modify certain parameters
1591 * Review of the /proc/sys file tree
1593 ------------------------------------------------------------------------------
1595 A very interesting part of /proc is the directory /proc/sys. This is not only
1596 a source of information, it also allows you to change parameters within the
1597 kernel. Be very careful when attempting this. You can optimize your system,
1598 but you can also cause it to crash. Never alter kernel parameters on a
1599 production system. Set up a development machine and test to make sure that
1600 everything works the way you want it to. You may have no alternative but to
1601 reboot the machine once an error has been made.
1603 To change a value, simply echo the new value into the file.
1604 You need to be root to do this. You can create your own boot script
1605 to perform this every time your system boots.
1607 The files in /proc/sys can be used to fine tune and monitor miscellaneous and
1608 general things in the operation of the Linux kernel. Since some of the files
1609 can inadvertently disrupt your system, it is advisable to read both
1610 documentation and source before actually making adjustments. In any case, be
1611 very careful when writing to any of these files. The entries in /proc may
1612 change slightly between the 2.1.* and the 2.2 kernel, so if there is any doubt
1613 review the kernel documentation in the directory /usr/src/linux/Documentation.
1614 This chapter is heavily based on the documentation included in the pre 2.2
1615 kernels, and became part of it in version 2.2.1 of the Linux kernel.
1617 Please see: Documentation/admin-guide/sysctl/ directory for descriptions of these
1623 Certain aspects of kernel behavior can be modified at runtime, without the
1624 need to recompile the kernel, or even to reboot the system. The files in the
1625 /proc/sys tree can not only be read, but also modified. You can use the echo
1626 command to write value into these files, thereby changing the default settings
1630 Chapter 3: Per-process Parameters
1631 =================================
1633 3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
1634 --------------------------------------------------------------------------------
1636 These files can be used to adjust the badness heuristic used to select which
1637 process gets killed in out of memory (oom) conditions.
1639 The badness heuristic assigns a value to each candidate task ranging from 0
1640 (never kill) to 1000 (always kill) to determine which process is targeted. The
1641 units are roughly a proportion along that range of allowed memory the process
1642 may allocate from based on an estimation of its current memory and swap use.
1643 For example, if a task is using all allowed memory, its badness score will be
1644 1000. If it is using half of its allowed memory, its score will be 500.
1646 The amount of "allowed" memory depends on the context in which the oom killer
1647 was called. If it is due to the memory assigned to the allocating task's cpuset
1648 being exhausted, the allowed memory represents the set of mems assigned to that
1649 cpuset. If it is due to a mempolicy's node(s) being exhausted, the allowed
1650 memory represents the set of mempolicy nodes. If it is due to a memory
1651 limit (or swap limit) being reached, the allowed memory is that configured
1652 limit. Finally, if it is due to the entire system being out of memory, the
1653 allowed memory represents all allocatable resources.
1655 The value of /proc/<pid>/oom_score_adj is added to the badness score before it
1656 is used to determine which task to kill. Acceptable values range from -1000
1657 (OOM_SCORE_ADJ_MIN) to +1000 (OOM_SCORE_ADJ_MAX). This allows userspace to
1658 polarize the preference for oom killing either by always preferring a certain
1659 task or completely disabling it. The lowest possible value, -1000, is
1660 equivalent to disabling oom killing entirely for that task since it will always
1661 report a badness score of 0.
1663 Consequently, it is very simple for userspace to define the amount of memory to
1664 consider for each task. Setting a /proc/<pid>/oom_score_adj value of +500, for
1665 example, is roughly equivalent to allowing the remainder of tasks sharing the
1666 same system, cpuset, mempolicy, or memory controller resources to use at least
1667 50% more memory. A value of -500, on the other hand, would be roughly
1668 equivalent to discounting 50% of the task's allowed memory from being considered
1669 as scoring against the task.
1671 For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
1672 be used to tune the badness score. Its acceptable values range from -16
1673 (OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
1674 (OOM_DISABLE) to disable oom killing entirely for that task. Its value is
1675 scaled linearly with /proc/<pid>/oom_score_adj.
1677 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
1678 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
1679 requires CAP_SYS_RESOURCE.
1682 3.2 /proc/<pid>/oom_score - Display current oom-killer score
1683 -------------------------------------------------------------
1685 This file can be used to check the current score used by the oom-killer for
1686 any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
1687 process should be killed in an out-of-memory situation.
1689 Please note that the exported value includes oom_score_adj so it is
1690 effectively in range [0,2000].
1693 3.3 /proc/<pid>/io - Display the IO accounting fields
1694 -------------------------------------------------------
1696 This file contains IO statistics for each running process.
1703 test:/tmp # dd if=/dev/zero of=/tmp/test.dat &
1706 test:/tmp # cat /proc/3828/io
1712 write_bytes: 323932160
1713 cancelled_write_bytes: 0
1722 I/O counter: chars read
1723 The number of bytes which this task has caused to be read from storage. This
1724 is simply the sum of bytes which this process passed to read() and pread().
1725 It includes things like tty IO and it is unaffected by whether or not actual
1726 physical disk IO was required (the read might have been satisfied from
1733 I/O counter: chars written
1734 The number of bytes which this task has caused, or shall cause to be written
1735 to disk. Similar caveats apply here as with rchar.
1741 I/O counter: read syscalls
1742 Attempt to count the number of read I/O operations, i.e. syscalls like read()
1749 I/O counter: write syscalls
1750 Attempt to count the number of write I/O operations, i.e. syscalls like
1751 write() and pwrite().
1757 I/O counter: bytes read
1758 Attempt to count the number of bytes which this process really did cause to
1759 be fetched from the storage layer. Done at the submit_bio() level, so it is
1760 accurate for block-backed filesystems. <please add status regarding NFS and
1761 CIFS at a later time>
1767 I/O counter: bytes written
1768 Attempt to count the number of bytes which this process caused to be sent to
1769 the storage layer. This is done at page-dirtying time.
1772 cancelled_write_bytes
1773 ^^^^^^^^^^^^^^^^^^^^^
1775 The big inaccuracy here is truncate. If a process writes 1MB to a file and
1776 then deletes the file, it will in fact perform no writeout. But it will have
1777 been accounted as having caused 1MB of write.
1778 In other words: The number of bytes which this process caused to not happen,
1779 by truncating pagecache. A task can cause "negative" IO too. If this task
1780 truncates some dirty pagecache, some IO which another task has been accounted
1781 for (in its write_bytes) will not be happening. We _could_ just subtract that
1782 from the truncating task's write_bytes, but there is information loss in doing
1788 At its current implementation state, this is a bit racy on 32-bit machines:
1789 if process A reads process B's /proc/pid/io while process B is updating one
1790 of those 64-bit counters, process A could see an intermediate result.
1793 More information about this can be found within the taskstats documentation in
1794 Documentation/accounting.
1796 3.4 /proc/<pid>/coredump_filter - Core dump filtering settings
1797 ---------------------------------------------------------------
1798 When a process is dumped, all anonymous memory is written to a core file as
1799 long as the size of the core file isn't limited. But sometimes we don't want
1800 to dump some memory segments, for example, huge shared memory or DAX.
1801 Conversely, sometimes we want to save file-backed memory segments into a core
1802 file, not only the individual files.
1804 /proc/<pid>/coredump_filter allows you to customize which memory segments
1805 will be dumped when the <pid> process is dumped. coredump_filter is a bitmask
1806 of memory types. If a bit of the bitmask is set, memory segments of the
1807 corresponding memory type are dumped, otherwise they are not dumped.
1809 The following 9 memory types are supported:
1811 - (bit 0) anonymous private memory
1812 - (bit 1) anonymous shared memory
1813 - (bit 2) file-backed private memory
1814 - (bit 3) file-backed shared memory
1815 - (bit 4) ELF header pages in file-backed private memory areas (it is
1816 effective only if the bit 2 is cleared)
1817 - (bit 5) hugetlb private memory
1818 - (bit 6) hugetlb shared memory
1819 - (bit 7) DAX private memory
1820 - (bit 8) DAX shared memory
1822 Note that MMIO pages such as frame buffer are never dumped and vDSO pages
1823 are always dumped regardless of the bitmask status.
1825 Note that bits 0-4 don't affect hugetlb or DAX memory. hugetlb memory is
1826 only affected by bit 5-6, and DAX is only affected by bits 7-8.
1828 The default value of coredump_filter is 0x33; this means all anonymous memory
1829 segments, ELF header pages and hugetlb private memory are dumped.
1831 If you don't want to dump all shared memory segments attached to pid 1234,
1832 write 0x31 to the process's proc file::
1834 $ echo 0x31 > /proc/1234/coredump_filter
1836 When a new process is created, the process inherits the bitmask status from its
1837 parent. It is useful to set up coredump_filter before the program runs.
1840 $ echo 0x7 > /proc/self/coredump_filter
1843 3.5 /proc/<pid>/mountinfo - Information about mounts
1844 --------------------------------------------------------
1846 This file contains lines of the form::
1848 36 35 98:0 /mnt1 /mnt2 rw,noatime master:1 - ext3 /dev/root rw,errors=continue
1849 (1)(2)(3) (4) (5) (6) (7) (8) (9) (10) (11)
1851 (1) mount ID: unique identifier of the mount (may be reused after umount)
1852 (2) parent ID: ID of parent (or of self for the top of the mount tree)
1853 (3) major:minor: value of st_dev for files on filesystem
1854 (4) root: root of the mount within the filesystem
1855 (5) mount point: mount point relative to the process's root
1856 (6) mount options: per mount options
1857 (7) optional fields: zero or more fields of the form "tag[:value]"
1858 (8) separator: marks the end of the optional fields
1859 (9) filesystem type: name of filesystem of the form "type[.subtype]"
1860 (10) mount source: filesystem specific information or "none"
1861 (11) super options: per super block options
1863 Parsers should ignore all unrecognised optional fields. Currently the
1864 possible optional fields are:
1866 ================ ==============================================================
1867 shared:X mount is shared in peer group X
1868 master:X mount is slave to peer group X
1869 propagate_from:X mount is slave and receives propagation from peer group X [#]_
1870 unbindable mount is unbindable
1871 ================ ==============================================================
1873 .. [#] X is the closest dominant peer group under the process's root. If
1874 X is the immediate master of the mount, or if there's no dominant peer
1875 group under the same root, then only the "master:X" field is present
1876 and not the "propagate_from:X" field.
1878 For more information on mount propagation see:
1880 Documentation/filesystems/sharedsubtree.rst
1883 3.6 /proc/<pid>/comm & /proc/<pid>/task/<tid>/comm
1884 --------------------------------------------------------
1885 These files provide a method to access a task's comm value. It also allows for
1886 a task to set its own or one of its thread siblings comm value. The comm value
1887 is limited in size compared to the cmdline value, so writing anything longer
1888 then the kernel's TASK_COMM_LEN (currently 16 chars) will result in a truncated
1892 3.7 /proc/<pid>/task/<tid>/children - Information about task children
1893 -------------------------------------------------------------------------
1894 This file provides a fast way to retrieve first level children pids
1895 of a task pointed by <pid>/<tid> pair. The format is a space separated
1898 Note the "first level" here -- if a child has its own children they will
1899 not be listed here; one needs to read /proc/<children-pid>/task/<tid>/children
1900 to obtain the descendants.
1902 Since this interface is intended to be fast and cheap it doesn't
1903 guarantee to provide precise results and some children might be
1904 skipped, especially if they've exited right after we printed their
1905 pids, so one needs to either stop or freeze processes being inspected
1906 if precise results are needed.
1909 3.8 /proc/<pid>/fdinfo/<fd> - Information about opened file
1910 ---------------------------------------------------------------
1911 This file provides information associated with an opened file. The regular
1912 files have at least three fields -- 'pos', 'flags' and 'mnt_id'. The 'pos'
1913 represents the current offset of the opened file in decimal form [see lseek(2)
1914 for details], 'flags' denotes the octal O_xxx mask the file has been
1915 created with [see open(2) for details] and 'mnt_id' represents mount ID of
1916 the file system containing the opened file [see 3.5 /proc/<pid>/mountinfo
1919 A typical output is::
1925 All locks associated with a file descriptor are shown in its fdinfo too::
1927 lock: 1: FLOCK ADVISORY WRITE 359 00:13:11691 0 EOF
1929 The files such as eventfd, fsnotify, signalfd, epoll among the regular pos/flags
1930 pair provide additional information particular to the objects they represent.
1942 where 'eventfd-count' is hex value of a counter.
1952 sigmask: 0000000000000200
1954 where 'sigmask' is hex value of the signal mask associated
1965 tfd: 5 events: 1d data: ffffffffffffffff pos:0 ino:61af sdev:7
1967 where 'tfd' is a target file descriptor number in decimal form,
1968 'events' is events mask being watched and the 'data' is data
1969 associated with a target [see epoll(7) for more details].
1971 The 'pos' is current offset of the target file in decimal form
1972 [see lseek(2)], 'ino' and 'sdev' are inode and device numbers
1973 where target file resides, all in hex format.
1977 For inotify files the format is the following::
1981 inotify wd:3 ino:9e7e sdev:800013 mask:800afce ignored_mask:0 fhandle-bytes:8 fhandle-type:1 f_handle:7e9e0000640d1b6d
1983 where 'wd' is a watch descriptor in decimal form, i.e. a target file
1984 descriptor number, 'ino' and 'sdev' are inode and device where the
1985 target file resides and the 'mask' is the mask of events, all in hex
1986 form [see inotify(7) for more details].
1988 If the kernel was built with exportfs support, the path to the target
1989 file is encoded as a file handle. The file handle is provided by three
1990 fields 'fhandle-bytes', 'fhandle-type' and 'f_handle', all in hex
1993 If the kernel is built without exportfs support the file handle won't be
1996 If there is no inotify mark attached yet the 'inotify' line will be omitted.
1998 For fanotify files the format is::
2003 fanotify flags:10 event-flags:0
2004 fanotify mnt_id:12 mflags:40 mask:38 ignored_mask:40000003
2005 fanotify ino:4f969 sdev:800013 mflags:0 mask:3b ignored_mask:40000000 fhandle-bytes:8 fhandle-type:1 f_handle:69f90400c275b5b4
2007 where fanotify 'flags' and 'event-flags' are values used in fanotify_init
2008 call, 'mnt_id' is the mount point identifier, 'mflags' is the value of
2009 flags associated with mark which are tracked separately from events
2010 mask. 'ino' and 'sdev' are target inode and device, 'mask' is the events
2011 mask and 'ignored_mask' is the mask of events which are to be ignored.
2012 All are in hex format. Incorporation of 'mflags', 'mask' and 'ignored_mask'
2013 provide information about flags and mask used in fanotify_mark
2014 call [see fsnotify manpage for details].
2016 While the first three lines are mandatory and always printed, the rest is
2017 optional and may be omitted if no marks created yet.
2030 it_value: (0, 49406829)
2033 where 'clockid' is the clock type and 'ticks' is the number of the timer expirations
2034 that have occurred [see timerfd_create(2) for details]. 'settime flags' are
2035 flags in octal form been used to setup the timer [see timerfd_settime(2) for
2036 details]. 'it_value' is remaining time until the timer expiration.
2037 'it_interval' is the interval for the timer. Note the timer might be set up
2038 with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value'
2039 still exhibits timer's remaining time.
2041 3.9 /proc/<pid>/map_files - Information about memory mapped files
2042 ---------------------------------------------------------------------
2043 This directory contains symbolic links which represent memory mapped files
2044 the process is maintaining. Example output::
2046 | lr-------- 1 root root 64 Jan 27 11:24 333c600000-333c620000 -> /usr/lib64/ld-2.18.so
2047 | lr-------- 1 root root 64 Jan 27 11:24 333c81f000-333c820000 -> /usr/lib64/ld-2.18.so
2048 | lr-------- 1 root root 64 Jan 27 11:24 333c820000-333c821000 -> /usr/lib64/ld-2.18.so
2050 | lr-------- 1 root root 64 Jan 27 11:24 35d0421000-35d0422000 -> /usr/lib64/libselinux.so.1
2051 | lr-------- 1 root root 64 Jan 27 11:24 400000-41a000 -> /usr/bin/ls
2053 The name of a link represents the virtual memory bounds of a mapping, i.e.
2054 vm_area_struct::vm_start-vm_area_struct::vm_end.
2056 The main purpose of the map_files is to retrieve a set of memory mapped
2057 files in a fast way instead of parsing /proc/<pid>/maps or
2058 /proc/<pid>/smaps, both of which contain many more records. At the same
2059 time one can open(2) mappings from the listings of two processes and
2060 comparing their inode numbers to figure out which anonymous memory areas
2061 are actually shared.
2063 3.10 /proc/<pid>/timerslack_ns - Task timerslack value
2064 ---------------------------------------------------------
2065 This file provides the value of the task's timerslack value in nanoseconds.
2066 This value specifies an amount of time that normal timers may be deferred
2067 in order to coalesce timers and avoid unnecessary wakeups.
2069 This allows a task's interactivity vs power consumption tradeoff to be
2072 Writing 0 to the file will set the task's timerslack to the default value.
2074 Valid values are from 0 - ULLONG_MAX
2076 An application setting the value must have PTRACE_MODE_ATTACH_FSCREDS level
2077 permissions on the task specified to change its timerslack_ns value.
2079 3.11 /proc/<pid>/patch_state - Livepatch patch operation state
2080 -----------------------------------------------------------------
2081 When CONFIG_LIVEPATCH is enabled, this file displays the value of the
2082 patch state for the task.
2084 A value of '-1' indicates that no patch is in transition.
2086 A value of '0' indicates that a patch is in transition and the task is
2087 unpatched. If the patch is being enabled, then the task hasn't been
2088 patched yet. If the patch is being disabled, then the task has already
2091 A value of '1' indicates that a patch is in transition and the task is
2092 patched. If the patch is being enabled, then the task has already been
2093 patched. If the patch is being disabled, then the task hasn't been
2096 3.12 /proc/<pid>/arch_status - task architecture specific status
2097 -------------------------------------------------------------------
2098 When CONFIG_PROC_PID_ARCH_STATUS is enabled, this file displays the
2099 architecture specific status of the task.
2106 $ cat /proc/6753/arch_status
2107 AVX512_elapsed_ms: 8
2112 x86 specific entries
2113 ~~~~~~~~~~~~~~~~~~~~~
2118 If AVX512 is supported on the machine, this entry shows the milliseconds
2119 elapsed since the last time AVX512 usage was recorded. The recording
2120 happens on a best effort basis when a task is scheduled out. This means
2121 that the value depends on two factors:
2123 1) The time which the task spent on the CPU without being scheduled
2124 out. With CPU isolation and a single runnable task this can take
2127 2) The time since the task was scheduled out last. Depending on the
2128 reason for being scheduled out (time slice exhausted, syscall ...)
2129 this can be arbitrary long time.
2131 As a consequence the value cannot be considered precise and authoritative
2132 information. The application which uses this information has to be aware
2133 of the overall scenario on the system in order to determine whether a
2134 task is a real AVX512 user or not. Precise information can be obtained
2135 with performance counters.
2137 A special value of '-1' indicates that no AVX512 usage was recorded, thus
2138 the task is unlikely an AVX512 user, but depends on the workload and the
2139 scheduling scenario, it also could be a false negative mentioned above.
2141 Chapter 4: Configuring procfs
2142 =============================
2145 ---------------------
2147 The following mount options are supported:
2149 ========= ========================================================
2150 hidepid= Set /proc/<pid>/ access mode.
2151 gid= Set the group authorized to learn processes information.
2152 subset= Show only the specified subset of procfs.
2153 ========= ========================================================
2155 hidepid=off or hidepid=0 means classic mode - everybody may access all
2156 /proc/<pid>/ directories (default).
2158 hidepid=noaccess or hidepid=1 means users may not access any /proc/<pid>/
2159 directories but their own. Sensitive files like cmdline, sched*, status are now
2160 protected against other users. This makes it impossible to learn whether any
2161 user runs specific program (given the program doesn't reveal itself by its
2162 behaviour). As an additional bonus, as /proc/<pid>/cmdline is unaccessible for
2163 other users, poorly written programs passing sensitive information via program
2164 arguments are now protected against local eavesdroppers.
2166 hidepid=invisible or hidepid=2 means hidepid=1 plus all /proc/<pid>/ will be
2167 fully invisible to other users. It doesn't mean that it hides a fact whether a
2168 process with a specific pid value exists (it can be learned by other means, e.g.
2169 by "kill -0 $PID"), but it hides process' uid and gid, which may be learned by
2170 stat()'ing /proc/<pid>/ otherwise. It greatly complicates an intruder's task of
2171 gathering information about running processes, whether some daemon runs with
2172 elevated privileges, whether other user runs some sensitive program, whether
2173 other users run any program at all, etc.
2175 hidepid=ptraceable or hidepid=4 means that procfs should only contain
2176 /proc/<pid>/ directories that the caller can ptrace.
2178 gid= defines a group authorized to learn processes information otherwise
2179 prohibited by hidepid=. If you use some daemon like identd which needs to learn
2180 information about processes information, just add identd to this group.
2182 subset=pid hides all top level files and directories in the procfs that
2183 are not related to tasks.
2185 Chapter 5: Filesystem behavior
2186 ==============================
2188 Originally, before the advent of pid namepsace, procfs was a global file
2189 system. It means that there was only one procfs instance in the system.
2191 When pid namespace was added, a separate procfs instance was mounted in
2192 each pid namespace. So, procfs mount options are global among all
2193 mountpoints within the same namespace::
2195 # grep ^proc /proc/mounts
2196 proc /proc proc rw,relatime,hidepid=2 0 0
2198 # strace -e mount mount -o hidepid=1 -t proc proc /tmp/proc
2199 mount("proc", "/tmp/proc", "proc", 0, "hidepid=1") = 0
2200 +++ exited with 0 +++
2202 # grep ^proc /proc/mounts
2203 proc /proc proc rw,relatime,hidepid=2 0 0
2204 proc /tmp/proc proc rw,relatime,hidepid=2 0 0
2206 and only after remounting procfs mount options will change at all
2209 # mount -o remount,hidepid=1 -t proc proc /tmp/proc
2211 # grep ^proc /proc/mounts
2212 proc /proc proc rw,relatime,hidepid=1 0 0
2213 proc /tmp/proc proc rw,relatime,hidepid=1 0 0
2215 This behavior is different from the behavior of other filesystems.
2217 The new procfs behavior is more like other filesystems. Each procfs mount
2218 creates a new procfs instance. Mount options affect own procfs instance.
2219 It means that it became possible to have several procfs instances
2220 displaying tasks with different filtering options in one pid namespace::
2222 # mount -o hidepid=invisible -t proc proc /proc
2223 # mount -o hidepid=noaccess -t proc proc /tmp/proc
2224 # grep ^proc /proc/mounts
2225 proc /proc proc rw,relatime,hidepid=invisible 0 0
2226 proc /tmp/proc proc rw,relatime,hidepid=noaccess 0 0
projects / platform / kernel / linux-starfive.git / blob