Documentation/devicetree/bindings/usb/renesas_usb3.txt

   1 Renesas Electronics USB3.0 Peripheral driver
   2
   3 Required properties:
   4   - compatible: Must contain one of the following:
   5         - "renesas,r8a7795-usb3-peri"
   6         - "renesas,r8a7796-usb3-peri"
   7         - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
   8           device
   9
  10     When compatible with the generic version, nodes must list the
  11     SoC-specific version corresponding to the platform first
  12     followed by the generic version.
  13
  14   - reg: Base address and length of the register for the USB3.0 Peripheral
  15   - interrupts: Interrupt specifier for the USB3.0 Peripheral
  16   - clocks: clock phandle and specifier pair
  17
  18 Optional properties:
  19   - phys: phandle + phy specifier pair
  20   - phy-names: must be "usb"
  21
  22 Example of R-Car H3 ES1.x:
  23         usb3_peri0: usb@ee020000 {
  24                 compatible = "renesas,r8a7795-usb3-peri",
  25                              "renesas,rcar-gen3-usb3-peri";
  26                 reg = <0 0xee020000 0 0x400>;
  27                 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
  28                 clocks = <&cpg CPG_MOD 328>;
  29         };
  30
  31         usb3_peri1: usb@ee060000 {
  32                 compatible = "renesas,r8a7795-usb3-peri",
  33                              "renesas,rcar-gen3-usb3-peri";
  34                 reg = <0 0xee060000 0 0x400>;
  35                 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
  36                 clocks = <&cpg CPG_MOD 327>;
  37         };