1 Device tree configuration for Renesas RSPI/QSPI driver
4 - compatible : For Renesas Serial Peripheral Interface on legacy SH:
5 "renesas,rspi-<soctype>", "renesas,rspi" as fallback.
6 For Renesas Serial Peripheral Interface on RZ/A1H:
7 "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback.
8 For Quad Serial Peripheral Interface on R-Car Gen2:
9 "renesas,qspi-<soctype>", "renesas,qspi" as fallback.
10 Examples of valid soctypes are "sh7757" (SH),
11 "r7s72100" (RZ/A1H), "r8a7790" (R-Car H2), and
13 - reg : Address start and address range size of the device
14 - interrupts : A list of interrupt-specifiers, one for each entry in
16 If interrupt-names is not present, an interrupt specifier
17 for a single muxed interrupt.
18 - interrupt-names : A list of interrupt names. Should contain (if present):
22 - "mux" for a single muxed interrupt.
23 - interrupt-parent : The phandle for the interrupt controller that
24 services interrupts for this device.
25 - num-cs : Number of chip selects. Some RSPI cores have more than 1.
26 - #address-cells : Must be <1>
27 - #size-cells : Must be <0>
30 - clocks: : Must contain a reference to the functional clock.
32 Pinctrl properties might be needed, too. See
33 Documentation/devicetree/bindings/pinctrl/renesas,*.
38 compatible = "renesas,rspi-r7s72100", "renesas,rspi-rz";
39 reg = <0xe800c800 0x24>;
40 interrupts = <0 238 IRQ_TYPE_LEVEL_HIGH>,
41 <0 239 IRQ_TYPE_LEVEL_HIGH>,
42 <0 240 IRQ_TYPE_LEVEL_HIGH>;
43 interrupt-names = "error", "rx", "tx";
44 interrupt-parent = <&gic>;
51 compatible = "renesas,qspi-r8a7791", "renesas,qspi";
52 reg = <0 0xe6b10000 0 0x2c>;
53 interrupt-parent = <&gic>;
54 interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
55 clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>;