1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/regulator/qcom,spmi-regulator.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm SPMI Regulators
10 - Robert Marko <robimarko@gmail.com>
15 - qcom,pm6125-regulators
16 - qcom,pm660-regulators
17 - qcom,pm660l-regulators
18 - qcom,pm8004-regulators
19 - qcom,pm8005-regulators
20 - qcom,pm8226-regulators
21 - qcom,pm8841-regulators
22 - qcom,pm8916-regulators
23 - qcom,pm8941-regulators
24 - qcom,pm8950-regulators
25 - qcom,pm8994-regulators
26 - qcom,pmi8994-regulators
27 - qcom,pmp8074-regulators
28 - qcom,pms405-regulators
31 description: Reference to syscon node defining the SAW registers
32 $ref: /schemas/types.yaml#/definitions/phandle
35 "^(5vs[1-2]|(l|s)[1-9][0-9]?|lvs[1-3])$":
36 description: List of regulators and its properties
39 unevaluatedProperties: false
44 Maximum number of times to try toggling a voltage switch off and
45 back on as a result of consecutive over current events
46 $ref: /schemas/types.yaml#/definitions/uint32
50 Time to delay in milliseconds between each voltage switch toggle
51 after an over current event takes place
52 $ref: /schemas/types.yaml#/definitions/uint32
56 Bit mask specifying which hardware pins should be used to enable the
59 0 = ignore all hardware enable signals
60 BIT(0) = follow HW0_EN signal
61 BIT(1) = follow HW1_EN signal
62 BIT(2) = follow HW2_EN signal
63 BIT(3) = follow HW3_EN signal
64 $ref: /schemas/types.yaml#/definitions/uint32
70 Bit mask specifying which hardware pins should be used to force the
71 regulator into high power mode, if any.
73 0 = ignore all hardware enable signals
74 BIT(0) = follow HW0_EN signal
75 BIT(1) = follow HW1_EN signal
76 BIT(2) = follow HW2_EN signal
77 BIT(3) = follow HW3_EN signal
78 BIT(4) = follow PMIC awake state
79 $ref: /schemas/types.yaml#/definitions/uint32
83 qcom,vs-soft-start-strength:
85 This property sets the soft start strength for voltage switch type
92 $ref: /schemas/types.yaml#/definitions/uint32
97 description: SAW controlled gang slave. Will not be configured.
102 SAW controlled gang leader. Will be configured as SAW regulator.
114 - qcom,pm6125-regulators
117 vdd_l1_l7_l17_l18-supply: true
118 vdd_l2_l3_l4-supply: true
119 vdd_l5_l15_l19_l20_l21_l22-supply: true
120 vdd_l6_l8-supply: true
121 vdd_l9_l11-supply: true
122 vdd_l10_l13_l14-supply: true
123 vdd_l12_l16-supply: true
124 vdd_l23_l24-supply: true
126 "^vdd_s[1-8]-supply$": true
133 - qcom,pm660-regulators
136 vdd_l15_l16_l17_l18_l19-supply: true
137 vdd_l1_l6_l7-supply: true
138 vdd_l2_l3-supply: true
140 vdd_l8_l9_l10_l11_l12_l13_l14-supply: true
142 "^vdd_s[1-6]-supply$": true
149 - qcom,pm660l-regulators
152 vdd_l1_l9_l10-supply: true
154 vdd_l3_l5_l7_l8-supply: true
155 vdd_l4_l6-supply: true
157 "^vdd_s[1-5]-supply$": true
164 - qcom,pm8004-regulators
167 "^vdd_s[25]-supply$": true
174 - qcom,pm8005-regulators
177 "^vdd_s[1-4]-supply$": true
184 - qcom,pm8226-regulators
187 vdd_l10_l11_l13-supply: true
188 vdd_l12_l14-supply: true
189 vdd_l15_l16_l17_l18-supply: true
190 vdd_l19_l20_l21_l22_l23_l28-supply: true
191 vdd_l1_l2_l4_l5-supply: true
193 vdd_l3_l24_l26-supply: true
194 vdd_l6_l7_l8_l9_l27-supply: true
195 vdd_lvs1-supply: true
197 "^vdd_s[1-5]-supply$": true
204 - qcom,pm8841-regulators
207 "^vdd_s[1-8]-supply$": true
214 - qcom,pm8916-regulators
217 vdd_l1_l3-supply: true
218 vdd_l4_l5_l6-supply: true
219 vdd_l8_l11_l14_l15_l16-supply: true
220 vdd_l9_l10_l12_l13_l17_l18-supply: true
222 "^vdd_l[27]-supply$": true
223 "^vdd_s[1-4]-supply$": true
230 - qcom,pm8941-regulators
235 - description: Over-current protection interrupt for 5V S1
236 - description: Over-current protection interrupt for 5V S2
241 vdd_l13_l20_l23_l24-supply: true
242 vdd_l1_l3-supply: true
244 vdd_l2_lvs_1_2_3-supply: true
245 vdd_l4_l11-supply: true
246 vdd_l5_l7-supply: true
247 vdd_l6_l12_l14_l15-supply: true
248 vdd_l8_l16_l18_19-supply: true
249 vdd_l9_l10_l17_l22-supply: true
252 "^vdd_s[1-3]-supply$": true
259 - qcom,pm8950-regulators
262 vdd_l1_l19-supply: true
265 vdd_l2_l23-supply: true
267 vdd_l4_l5_l6_l7_l16-supply: true
268 vdd_l8_l11_l12_l17_l22-supply: true
269 vdd_l9_l10_l13_l14_l15_l18-supply: true
271 "^vdd_s[1-6]-supply$": true
278 - qcom,pm8994-regulators
282 vdd_l13_l19_l23_l24-supply: true
283 vdd_l14_l15-supply: true
284 vdd_l17_l29-supply: true
285 vdd_l20_l21-supply: true
287 vdd_l2_l26_l28-supply: true
288 vdd_l3_l11-supply: true
289 vdd_l4_l27_l31-supply: true
290 vdd_l5_l7-supply: true
291 vdd_l6_l12_l32-supply: true
292 vdd_l8_l16_l30-supply: true
293 vdd_l9_l10_l18_l22-supply: true
294 vdd_lvs_1_2-supply: true
296 "^vdd_s[1-9][0-2]?-supply$": true
303 - qcom,pmi8994-regulators
308 "^vdd_s[1-3]-supply$": true
315 - qcom,pmp8074-regulators
318 vdd_l10_l11_l12_l13-supply: true
319 vdd_l1_l2-supply: true
320 vdd_l3_l8-supply: true
321 vdd_l5_l6_l15-supply: true
323 "^vdd_l[479]-supply$": true
324 "^vdd_s[1-5]-supply$": true
331 - qcom,pms405-regulators
336 unevaluatedProperties: false
341 compatible = "qcom,pm8941-regulators";
342 vdd_l1_l3-supply = <&s1>;
345 regulator-min-microvolt = <1300000>;
346 regulator-max-microvolt = <1400000>;
350 regulator-min-microvolt = <1225000>;
351 regulator-max-microvolt = <1300000>;