1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 $id: http://devicetree.org/schemas/pinctrl/qcom,sm8350-pinctrl.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Qualcomm Technologies, Inc. SM8350 TLMM block
10 - Vinod Koul <vkoul@kernel.org>
13 This binding describes the Top Level Mode Multiplexer (TLMM) block found
14 in the SM8350 platform.
17 - $ref: "pinctrl.yaml#"
18 - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
22 const: qcom,sm8350-tlmm
28 interrupt-controller: true
29 '#interrupt-cells': true
31 gpio-reserved-ranges: true
40 additionalProperties: false
45 - $ref: "#/$defs/qcom-sm8350-tlmm-state"
48 $ref: "#/$defs/qcom-sm8350-tlmm-state"
51 qcom-sm8350-tlmm-state:
54 Pinctrl node's client devices use subnodes for desired pin configuration.
55 Client device subnodes use below standard properties.
56 $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
61 List of gpio pins affected by the properties specified in this
65 - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-3])$"
66 - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
72 Specify the alternative function to be configured for the specified
75 enum: [ atest_char, atest_usb, audio_ref, cam_mclk, cci_async,
76 cci_i2c, cci_timer, cmu_rng, coex_uart1, coex_uart2, cri_trng,
77 cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
78 ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3,
79 gpio, ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
80 mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
81 mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck,
82 mi2s1_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws,
83 mss_grfc0, mss_grfc1, mss_grfc10, mss_grfc11, mss_grfc12,
84 mss_grfc2, mss_grfc3, mss_grfc4, mss_grfc5, mss_grfc6,
85 mss_grfc7, mss_grfc8, mss_grfc9, nav_gpio, pa_indicator,
86 pcie0_clkreqn, pcie1_clkreqn, phase_flag, pll_bist, pll_clk,
87 pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qlink0_enable,
88 qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
89 qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss, qspi0,
90 qspi1, qspi2, qspi3, qspi_clk, qspi_cs, qup0, qup1, qup10,
91 qup11, qup12, qup13, qup14, qup15, qup16, qup17, qup18, qup19,
92 qup2, qup3, qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5,
93 qup_l6, sd_write, sdc40, sdc41, sdc42, sdc43, sdc4_clk,
94 sdc4_cmd, sec_mi2s, tb_trig, tgu_ch0, tgu_ch1, tgu_ch2,
95 tgu_ch3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
96 uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present,
97 uim1_reset, usb2phy_ac, usb_phy, vfr_0, vfr_1, vsense_trigger ]
112 additionalProperties: false
116 #include <dt-bindings/interrupt-controller/arm-gic.h>
118 compatible = "qcom,sm8350-tlmm";
119 reg = <0x0f100000 0x300000>;
120 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
123 interrupt-controller;
124 #interrupt-cells = <2>;
125 gpio-ranges = <&tlmm 0 0 203>;
127 gpio-wo-subnode-state {
132 uart-w-subnodes-state {