8 The NFS version 2 protocol was first documented in RFC1094 (March 1989).
9 Since then two more major releases of NFS have been published, with NFSv3
10 being documented in RFC1813 (June 1995), and NFSv4 in RFC3530 (April
13 The Linux NFS client currently supports all the above published versions,
14 and work is in progress on adding support for minor version 1 of the NFSv4
17 The purpose of this document is to provide information on some of the
18 special features of the NFS client that can be configured by system
22 The nfs4_unique_id parameter
23 ============================
25 NFSv4 requires clients to identify themselves to servers with a unique
26 string. File open and lock state shared between one client and one server
27 is associated with this identity. To support robust NFSv4 state recovery
28 and transparent state migration, this identity string must not change
29 across client reboots.
31 Without any other intervention, the Linux client uses a string that contains
32 the local system's node name. System administrators, however, often do not
33 take care to ensure that node names are fully qualified and do not change
34 over the lifetime of a client system. Node names can have other
35 administrative requirements that require particular behavior that does not
36 work well as part of an nfs_client_id4 string.
38 The nfs.nfs4_unique_id boot parameter specifies a unique string that can be
39 used together with a system's node name when an NFS client identifies itself to
40 a server. Thus, if the system's node name is not unique, its
41 nfs.nfs4_unique_id can help prevent collisions with other clients.
43 The nfs.nfs4_unique_id string is typically a UUID, though it can contain
44 anything that is believed to be unique across all NFS clients. An
45 nfs4_unique_id string should be chosen when a client system is installed,
46 just as a system's root file system gets a fresh UUID in its label at
49 The string should remain fixed for the lifetime of the client. It can be
50 changed safely if care is taken that the client shuts down cleanly and all
51 outstanding NFSv4 state has expired, to prevent loss of NFSv4 state.
53 This string can be stored in an NFS client's grub.conf, or it can be provided
54 via a net boot facility such as PXE. It may also be specified as an nfs.ko
57 This uniquifier string will be the same for all NFS clients running in
58 containers unless it is overridden by a value written to
59 /sys/fs/nfs/net/nfs_client/identifier which will be local to the network
60 namespace of the process which writes.
66 NFSv4 allows for one server to refer the NFS client to data that has been
67 migrated onto another server by means of the special "fs_locations"
68 attribute. See `RFC3530 Section 6: Filesystem Migration and Replication`_ and
69 `Implementation Guide for Referrals in NFSv4`_.
71 .. _RFC3530 Section 6\: Filesystem Migration and Replication: https://tools.ietf.org/html/rfc3530#section-6
72 .. _Implementation Guide for Referrals in NFSv4: https://tools.ietf.org/html/draft-ietf-nfsv4-referrals-00
74 The fs_locations information can take the form of either an ip address and
75 a path, or a DNS hostname and a path. The latter requires the NFS client to
76 do a DNS lookup in order to mount the new volume, and hence the need for an
77 upcall to allow userland to provide this service.
79 Assuming that the user has the 'rpc_pipefs' filesystem mounted in the usual
80 /var/lib/nfs/rpc_pipefs, the upcall consists of the following steps:
82 (1) The process checks the dns_resolve cache to see if it contains a
83 valid entry. If so, it returns that entry and exits.
85 (2) If no valid entry exists, the helper script '/sbin/nfs_cache_getent'
86 (may be changed using the 'nfs.cache_getent' kernel boot parameter)
87 is run, with two arguments:
88 - the cache name, "dns_resolve"
89 - the hostname to resolve
91 (3) After looking up the corresponding ip address, the helper script
92 writes the result into the rpc_pipefs pseudo-file
93 '/var/lib/nfs/rpc_pipefs/cache/dns_resolve/channel'
94 in the following (text) format:
96 "<ip address> <hostname> <ttl>\n"
98 Where <ip address> is in the usual IPv4 (123.456.78.90) or IPv6
99 (ffee:ddcc:bbaa:9988:7766:5544:3322:1100, ffee::1100, ...) format.
100 <hostname> is identical to the second argument of the helper
101 script, and <ttl> is the 'time to live' of this cache entry (in
105 If <ip address> is invalid, say the string "0", then a negative
106 entry is created, which will cause the kernel to treat the hostname
107 as having no valid DNS translation.
112 A basic sample /sbin/nfs_cache_getent
113 =====================================
121 getent=/usr/bin/getent
122 rpc_pipefs=/var/lib/nfs/rpc_pipefs
126 echo "Usage: $0 cache_name entry_name"
132 cache_path=${rpc_pipefs}/cache/${cachename}/channel
134 case "${cachename}" in
137 result="$(${getent} hosts ${name} | ${cut} -f1 -d\ )"
138 [ -z "${result}" ] && result="0"
144 echo "${result} ${name} ${ttl}" >${cache_path}