1 What: /sys/bus/pci/devices/<BDF>/qat/state
4 Contact: qat-linux@intel.com
5 Description: (RW) Reports the current state of the QAT device. Write to
6 the file to start or stop the device.
10 * up: the device is up and running
11 * down: the device is down
14 It is possible to transition the device from up to down only
15 if the device is up and vice versa.
17 This attribute is only available for qat_4xxx devices.
19 What: /sys/bus/pci/devices/<BDF>/qat/cfg_services
22 Contact: qat-linux@intel.com
23 Description: (RW) Reports the current configuration of the QAT device.
24 Write to the file to change the configured services.
28 * sym;asym: the device is configured for running crypto
30 * asym;sym: identical to sym;asym
31 * dc: the device is configured for running compression services
32 * dcc: identical to dc but enables the dc chaining feature,
33 hash then compression. If this is not required chose dc
34 * sym: the device is configured for running symmetric crypto
36 * asym: the device is configured for running asymmetric crypto
38 * asym;dc: the device is configured for running asymmetric
39 crypto services and compression services
40 * dc;asym: identical to asym;dc
41 * sym;dc: the device is configured for running symmetric crypto
42 services and compression services
43 * dc;sym: identical to sym;dc
45 It is possible to set the configuration only if the device
46 is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
48 The following example shows how to change the configuration of
49 a device configured for running crypto services in order to
50 run data compression::
52 # cat /sys/bus/pci/devices/<BDF>/qat/state
54 # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
56 # echo down > /sys/bus/pci/devices/<BDF>/qat/state
57 # echo dc > /sys/bus/pci/devices/<BDF>/qat/cfg_services
58 # echo up > /sys/bus/pci/devices/<BDF>/qat/state
59 # cat /sys/bus/pci/devices/<BDF>/qat/cfg_services
62 This attribute is only available for qat_4xxx devices.
64 What: /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
67 Contact: qat-linux@intel.com
68 Description: (RW) This configuration option provides a way to force the device into remaining in
70 If idle support is enabled the device will transition to the `MIN` power state when
71 idle, otherwise will stay in the MAX power state.
72 Write to the file to enable or disable idle support.
76 * 0: idle support is disabled
77 * 1: idle support is enabled
81 It is possible to set the pm_idle_enabled value only if the device
82 is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state)
84 The following example shows how to change the pm_idle_enabled of
87 # cat /sys/bus/pci/devices/<BDF>/qat/state
89 # cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
91 # echo down > /sys/bus/pci/devices/<BDF>/qat/state
92 # echo 0 > /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
93 # echo up > /sys/bus/pci/devices/<BDF>/qat/state
94 # cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled
97 This attribute is only available for qat_4xxx devices.