One more
[platform/upstream/glib.git] / ChangeLog.pre-2-12
1 2005-12-21  Matthias Clasen  <mclasen@redhat.com>
2         
3         * README.in: Add some notes on when 'make check' may fail.
4
5 2005-12-20  Matthias Clasen  <mclasen@redhat.com>
6
7         * glib/glib.symbols: 
8         * glib/gthreadpool.h: 
9         * glib/gthreadpool.c (g_thread_pool_set_sort_function): New function
10         to sort tasks pushed into a threadpool.  (#324479, Martyn Russell)
11
12         * tests/threadpool-test.c: Test this.
13
14 Tue Dec 20 18:14:14 2005  Tim Janik  <timj@imendio.com>
15
16         * glib/gslice.[hc]: added mem_error() and mem_assert() to test and 
17         handle  errors without depending on gmessage.c which might not be
18         setup when the error occours.
19         removed G_SLICE_CONFIG_ALWAYS_FREE config option, fixed the code so
20         always freeing can be achieved by adjusting the working set time to
21         0 with G_SLICE_CONFIG_WORKING_SET_MSECS.
22         added G_SLICE_CONFIG_COLOR_INCREMENT to test different color increments
23         (mainly 0 and 1). reduced the minimum block size to 128 bytes, to
24         minimize wastage if small amounts of differently sized structrues are
25         allocated, this does come at a performance cost of roughly 5% though.
26         fixed up block alignment calculation, so it works for varying
27         block sizes. only use strerror() not g_strerror() since the latter
28         depends on working GQuark and GSlice.
29         mem_error(): implemented in terms of fprintf and vfprintf.
30
31         * tests/slice-color.c: new program to test cache colorization effects.
32
33         * tests/slice-test.c: trade G_SLICE_CONFIG_ALWAYS_FREE for 0 duration
34         G_SLICE_CONFIG_WORKING_SET_MSECS.
35
36 2005-12-17  Matthias Clasen  <mclasen@redhat.com>
37
38         * glib/goption.c (parse_short_option): Set an error in all
39         failure cases.  (#324332, Tim-Philipp Müller) 
40
41 2005-12-17  Sebastian Wilhelmi  <seppi@seppi.de>
42
43         * glib/gatomic.c: Fix memory barrier position in g_atomic_int_get
44         and g_atomic_pointer_get. Add g_atomic_int_set and
45         g_atomic_pointer_set implementations for the !DEFINE_WITH_MUTEXES &&
46         G_ATOMIC_OP_MEMORY_BARRIER_NEEDED case, as well as defining them
47         as functions (additionally to the macros in the header) for the 
48         !G_ATOMIC_OP_MEMORY_BARRIER_NEEDED case.
49
50 2005-12-16  Matthias Clasen  <mclasen@redhat.com>
51
52         *  glib/gmem.c (g_allocator_new): Don't return a pointer to
53         a const struct, since apps expect to be able to modify it. 
54         (#324179, J. Ali Harlow)
55
56 Tue Dec 13 10:13:32 2005  Tim Janik  <timj@imendio.com>
57
58         * glib/gatomic.h: added g_atomic_pointer_set() and g_atomic_int_set()
59         for systems where the initialization of atomic variables requires a
60         write memory barrier.
61
62 2005-12-09  Matthias Clasen  <mclasen@redhat.com>
63
64         * configure.in: Bump version
65
66         * === Released 2.9.1 ===
67
68 2005-12-09  Alexander Larsson  <alexl@redhat.com>
69
70         * glib/glist.h: 
71         * glib/gslist.h:
72         Use G_GNUC_WARN_UNUSED_RESULT on list functions that return
73         the whole list.
74
75 2005-12-08  Matthias Clasen  <mclasen@redhat.com>
76
77         * NEWS: Updates
78
79 2005-12-07  Martyn Russell  <martyn@imendio.com>
80
81         * glib/gasyncqueue.c:
82         - Call g_queue_insert_sorted() instead of duplicating the code.
83         - Call g_queue_sort() instead of duplicating the code.
84         - Invert sort function results to make sure the same sort function
85         gives the same results across glist, gslist, gqueue and
86         gasyncqueue.
87
88         * tests/asyncqueue-test.c:
89         - Updated the sort function to reflect the example in the
90         documentation for gasyncqueue.c.
91
92 2005-12-07  Martyn Russell  <martyn@imendio.com>
93
94         * docs/reference/glib/glib-sections.txt:
95         * docs/reference/glib/tmpl/linked_lists_double.sgml:
96         * docs/reference/glib/tmpl/linked_lists_single.sgml:
97         * glib/glist.[ch]: 
98         * glib/gslist.[ch]: 
99         - Added g_list_insert_sorted_with_data () and
100         g_slist_insert_sorted_with_data ().
101         - Removed the extra check in g_list_sort() and g_slist_sort() for
102         GCompareDataFunc vs. GCompareFunc.
103         
104 2005-12-07  Tor Lillqvist  <tml@novell.com>
105
106         * glib-gettextize.in: Look up prefix at run-time on Win32,
107         assuming the standard directory structure with glib-gettextize in
108         $prefix/bin.
109
110 2005-12-06  Matthias Clasen  <mclasen@redhat.com>
111
112         * glib/gmem.h: Exempt GTK+ from the mem chunk deprecation, since
113         we need GTK+ 2.8 to compile against GLib 2.10.
114
115 2005-12-05  Manish Singh  <yosh@gimp.org>
116
117         * tests/run-collate-test.sh: set LC_COLLATE, not LANG, to be sure
118         to override any user settings.
119
120 2005-12-05  Matthias Clasen  <mclasen@redhat.com>
121
122         * configure.in: Revert an accidential commit
123
124 2005-12-05  Matthias Clasen  <mclasen@redhat.com>
125
126         * glib/gutf8.c: Documentation updates.  (#323291, Morten Welinder)
127
128         * tests/Makefile.am (TESTS_ENVIRONMENT): 
129         * tests/gobject/Makefile.am (TESTS_ENVIRONMENT): Set
130         MALLOC_CHECK_ and MALLOC_PERTURB_
131
132         * tests/run-collate-tests.sh: Run the collation tests explicitly 
133         in en_US locale. (#320463)
134
135         * glib/gmem.h: Really deprecate GMemChunk.
136
137         * glib/gdate.c: 
138         * glib/gutils.c: 
139         * glib/gtree.c: 
140         * glib/gstring.c: 
141         * glib/giochannel.c: 
142         * glib/gstrfuncs.c: Add versioned deprecation docs. 
143
144 2005-12-05  Martyn Russell  <martyn@imendio.com>
145
146         * docs/reference/glib/glib-sections.txt:
147         * glib/gasyncqueue.[ch]:
148         - Added support for sorting async queues by with _push_sorted(),
149         _push_sorted_unlocked(), _sort() and _sort_unlocked() (#323047).
150         
151         * tests/Makefile.am:
152         * tests/asyncqueue-test.c:
153         - Added test case for gasyncqueue.c
154
155 Mon Dec  5 15:53:20 2005  Tim Janik  <timj@imendio.com>
156
157         * glib/gslice.c: implement chain walking for arbitrary ->next pointer
158         offsets in g_slice_free_chain_with_offset() based on a patch by behdad
159         in bug 323178. moved time consuming logic from g_slice_free() out of
160         the inner loop, so g_slice_free_chain_with_offset() provides a real
161         performance benefit over g_slice_free1() now.
162         
163         * glib/gslice.h: renamed g_slice_free_chain() to
164         g_slice_free_chain_with_offset(). implemented g_slice_free_chain() as
165         a type-safe macro as suggested in bug 323178.
166         simplified the macro implementation of g_slice_free() and implemented
167         it in a type safe manner for all compliers as suggested by Morten
168         Welinder <mortenw@gnome.org>.
169
170         * glib/gmain.c:
171         * glib/glist.c:
172         * glib/gslist.c:
173         * glib/glib.symbols: s/g_slice_free_chain/g_slice_free_chain_with_offset/
174
175 2005-12-05  Matthias Clasen  <mclasen@redhat.com>
176
177         * glib/gasyncqueue.c: Add some docs.
178
179         * tests/libmoduletestplugin_a.c: Fix compiler warnings.
180
181         * glib/gatomic.c: In the ia64 implementation, use
182         __sync builtin without _si or _di suffix.  (#321229,
183         Stanislav Brabec, patch by Andreas Schwab)
184
185 2005-12-04  Behdad Esfahbod  <behdad@gnome.org>
186
187         * glib/gslice.h: Remove comma at the end of enum.
188
189 2005-12-04  Matthias Clasen  <mclasen@redhat.com>
190
191         Handle multiple user names with the same UID better.
192         (#319535, Laszlo Peter)
193         
194         * glib/gutils.c (g_get_any_init_do): When determining user
195         data, first look up $LOGNAME. If the UID doesn't match
196         getuid(), fall back to the current behaviour of looking
197         up the user data based on getuid().
198
199 2005-12-04  Matthias Clasen  <mclasen@redhat.com>
200
201         * glib/gmacros.h (G_GNUC_WARN_UNUSED_RESULT): Add a macro
202         to make gcc warn if a function result is ignored.  (#145466,
203         Arjan van de Ven, Alex Larsson)
204
205         * glib/gmem.h: Add the new attribute to g_realloc and 
206         g_try_realloc.
207
208 2005-12-03  Matthias Clasen  <mclasen@redhat.com>
209
210         * glib/glib.symbols: 
211         * glib/gcache.h: Deprecate g_cache_value_foreach. (#322956,
212         Nicolas Caniart)
213
214         * glib/gmappedfile.c: Make mapping of empty files
215         work.  (#321530)
216         
217         * glib/gfileutils.c: Don't fork a new process just to 
218         fix the permissions of the created temp file.  (#321318,
219         Alexis S. L. Carvalho)
220
221 2005-12-02  Matthias Clasen  <mclasen@redhat.com>
222
223         * README.in: Add a note about Solaris threads.
224
225         * glib/gspawn.c:
226         * configure.in: Remove support for Solaris threads. 
227         (#136971, Sebastian Wilhelmi, patch by Andrew Paprocki)
228
229 2005-12-02  Matthias Clasen  <mclasen@redhat.com>
230
231         * configure.in: Define G_GUINT64_CONSTANT in analogy to
232         G_GINT64_CONSTANT.  (#322568, Andrew Paprocki)
233
234 2005-12-02  Matthias Clasen  <mclasen@redhat.com>
235
236         * glib/gslice.c: Win32 portability fixes and C99ism removal,
237         pointed out by Kazuki Iwamoto.  (#323052)
238         
239 2005-12-02  Matthias Clasen  <mclasen@redhat.com>
240
241         * glib/gatomic.c (g_atomic_int_add): Add a missing volatile for
242         the IA64 implementation.
243
244 Fri Dec  2 16:18:09 2005  Tim Janik  <timj@imendio.com>
245
246         * glib/gslice.c: some naming and type size fixups.
247
248 Fri Dec  2 13:08:58 2005  Tim Janik  <timj@gtk.org>
249
250         * glib/gslice.h (g_slice_free): reworked GCC-specific type-safe macro
251         variant into something less verbose, but digestible for gcc-3.4.
252
253 Fri Dec  2 10:55:07 2005  Tim Janik  <timj@imendio.com>
254
255         * tests/slice-test.c: extended to perform the benchmarking on the old
256         memchunk code if 'O' is selected.
257
258         * tests/memchunks.c: new file which contains the old GLib mem chunks
259         implementation with prefix old_mem_chunk_.
260
261         * tests/Makefile.am: added memchunks.c
262
263 Fri Dec  2 00:16:59 2005  Tim Janik  <timj@imendio.com>
264
265         * glib/gslice.c: improved gettimeofday() timer resolution by maintaining
266         acceptable load distribution of the syscall.
267         (allocator_get_magazine_threshold): reduce minimum/single-thread magazine
268         sizes to approximately page_size/2.5 to avoid excessive startup allocations.
269
270 2005-12-01  Matthias Clasen  <mclasen@redhat.com>
271
272         * tests/gobject/ifacecheck.c (test_iface_base_init): Don't
273         double-free base interface members.
274
275         * tests/Makefile.am: Remove duplicate variable.
276
277 Thu Dec  1 17:32:46 2005  Tim Janik  <timj@imendio.com>
278
279         * glib/gslice.[hc]: new slice allocator implementation.
280
281         * tests/slice-test.c: added random slice allocation test.
282
283         * glib/gthread.[hc]: removed newly added private thread mem API.
284
285         * glib/gthreadinit.h:
286         * glib/gmessages.c:
287         * glib/gthread.c:
288         * glib/gmem.c: divided glib threading initialisation into three phases,
289         initialisation where private keys and messaging are not available (only
290         needed by gmem.c), initialisation without messaging but private keys
291         available (gslice.c, gmessage.c), and full fledged initialisers that
292         server the rest of glib. initialisation functions got renamed to reflect
293         the limitations of their corresponding phases.
294
295         * glib/gmem.c: removed memchunk code, defer allocations to 
296         g_slice_* instead.
297
298         * glib/gmem.[hc]: removed g_slice_* skeletons.
299
300         * glib/glib.symbols: added g_slice_* symbols.
301
302         * configure.in: check for availability of posix_memalign(3), memalign(3)
303         and valloc(3). 
304
305         * glib/Makefile.am: added gslice.[hc].
306
307 2005-12-01  Tor Lillqvist  <tml@novell.com>
308
309         * glib/gstdio.c (g_stat): In the Win32 implementation, strip
310         trailing slash(es) for non-root folders. stat() fails if non-root
311         folders are specified with trailing slashes. It's too much hassle
312         to demand that callers strip such slashes themselves, especially
313         as it is easy to get it wrong and strip the slash of a root
314         folder.
315         (g_rename): On NT-based Windows, use MoveFileEx() with
316         MOVEFILE_REPLACE_EXISTING to better match Unix behaviour.
317
318 2005-11-28  Matthias Clasen  <mclasen@redhat.com>
319
320         Fix G_STMT_START / G_STMT_END on Solaris.  (#321972,
321         Andrew Paprocki)
322         
323         * configure.in: Check whether do { } while (0) works.
324
325         * glib/gmacros.h: Use do { } while (0) for G_STMT_START / 
326         G_STMT_END if it works.
327         
328 2005-11-28  Matthias Clasen  <mclasen@redhat.com>
329
330         * glib/gthread.c (g_static_rw_lock_wait, g_static_rw_lock_signal): 
331         * glib/gnode.c (g_node_depth_traverse_level): 
332         * glib/gmem.c (g_allocator_new): 
333         * glib/ghash.c (g_hash_table_unref, g_hash_table_destroy) 
334         (g_hash_table_foreach_remove_or_steal): Silence compiler
335         warnings.
336
337 2005-11-27  Matthias Clasen  <mclasen@redhat.com>
338
339         * glib/gunicollate.c (g_utf8_collate_key_for_filename): 
340         Don't read beyond len.  (#322520, Christian Persch)
341
342 Wed Nov 23 17:34:01 2005  Tim Janik  <timj@imendio.com>
343
344         * glib/gdataset.c: access datalist flags via atomic pointer access
345         functions, instead of acquiring the dataset lock. this is faster and
346         also matches the atomic pointer readouts in gdatalistprivate.h and
347         direct pointer modifications required by gobject.c.
348
349 Wed Nov 23 13:35:31 2005  Tim Janik  <timj@gtk.org>
350
351         * glib/gdataset.c: streamlined initialization code somewhat,
352         removed GData node cache.
353
354 2005-11-22  Matthias Clasen  <mclasen@redhat.com>
355
356         * glib/ghash.c (g_hash_table_ref): 
357         (g_hash_table_unref): Mark these as new API.
358
359         Avoid double locking in g_intern_string (#322133,
360         Benedikt Meurer)
361
362         * glib/gdataset.c (g_quark_from_string_internal): New 
363         internal function which factors out common parts of 
364         g_quark_from[_static]_string.
365         (g_quark_from_string, g_quark_from_static_string):
366         Use g_quark_from_string_internal.
367         (g_intern_string, g_intern_static_string): Use
368         g_quark_from_string_internal, and only take the
369         lock once.
370         (g_quark_new): Don't store the strings shifted by -1
371         in the g_quarks array.
372         (g_quark_to_string): Adapt to the previous change.
373
374 Tue Nov 22 14:04:26 2005  Tim Janik  <timj@imendio.com>
375
376         * glib/ghash.h: 
377         * glib/ghash.c: 
378         g_hash_table_new_full(): create hash tables with a ref count of 1.
379         g_hash_table_ref(): atomically ref_count+=1
380         g_hash_table_unref(): atomically ref_count-=1, destroys hash table
381         when refcount reaches 0.
382         g_hash_table_destroy(): just destroy keys and values, unref by 1.
383         g_hash_table_insert(): 
384         g_hash_table_replace(): assert ref_count>0.
385
386         * glib/gatomic.h: 
387         * glib/gatomic.c: added 'volatile' qualifier to all atomic pointer and
388         integer pointers.
389
390 2005-11-20  Behdad Esfahbod  <behdad@gnome.org>
391
392         * glib/guniprop.c (g_unichar_get_mirror_char): Remove unused
393         variables. (#321984, Andrew Paprocki)
394
395 2005-11-18  Matthias Clasen  <mclasen@redhat.com>
396
397         * configure.in: Bump version
398
399 2005-11-17  Matthias Clasen  <mclasen@redhat.com>
400
401         * === Released 2.9.0 ===
402
403         * glib/glib.symbols: Updates
404
405         * glib/gutf8.c (g_utf8_offset_to_pointer): Add some performance
406         hints to the docs. (Paolo Borelli)
407         
408         * NEWS: Updates
409
410         * glib/gthread.c (g_thread_foreach): Mark as new api.
411
412         * README.in: Updates.
413
414         * glib/glib.symbols: 
415         * glib/gdate.h: 
416         * glib/gdate.c (g_date_set_time_t): 
417         (g_date_set_time_val): Add functions to set a date from
418         a time_t and from a GTimeVal.
419         (g_date_set_time): Deprecate.  (#314067, Roger Leigh)
420         
421         * tests/Makefile.am:
422         * tests/utf8-pointer.c: Unit tests for g_utf8_pointer_to_offset
423         and g_utf8_offset_to_pointer.
424
425         * glib/gutf8.c (g_utf8_pointer_to_offset) 
426         (g_utf8_offset_to_pointer): Handle negative offsets, and use
427         "stutter stepping" for going backwards. (#320638, Larry
428         Ewing)
429
430         * glib/gbacktrace.c:
431         * glib/gdate.c:
432         * glib/gthread.c: const correctness fixes, found
433         by Arjan van de Ven and gcc.
434         
435 2005-11-16  Behdad Esfahbod  <behdad@gnome.org>
436
437         * docs/reference/glib/tmpl/unicode.sgml: Correct typo on mentioning
438         @G_UNICODE_BREAK_UNKNOWN that should be #G_UNICODE_BREAK_UNKNOWN.
439
440 2005-11-09  Behdad Esfahbod  <behdad@gnome.org>
441
442         * glib/guniprop.c: Use bit hacks instead when checking a general
443         category value against multiple values.
444
445         * glib/gutf8.c: Change ISO10646 to Unicode in docs.
446
447 2005-11-10  Simos Xenitellis  <simos@gnome.org>
448
449         * configure.in: Added tt (Tatar) to ALL_LINGUAS.
450
451 2005-11-05  Tor Lillqvist  <tml@novell.com>
452
453         * glib/giowin32.c (g_io_win32_set_flags): Don't call g_warning().
454         (#320688) Instead set error and return failure.
455
456 2005-11-07  Matthias Clasen  <mclasen@redhat.com>
457
458         * glib/gmain.c (g_main_dispatch): Don't call cb_funcs->unref
459         while holding the context lock.  (#320886, Andy Wingo)
460
461 2005-11-07  Billy Biggs <vektor@dumbterm.net>
462
463         * tests/refcount/Makefile.am: Add a missing reference to libglib
464         in the LDADD for this test.
465
466 2005-11-07  Matthias Clasen  <mclasen@redhat.com>
467
468         * glib/gmem.c (g_allocator_new): We need to set n_preallocs to a
469         nonzero value, otherwise GTK+ 2.8 breaks when compiled against
470         GLib 2.9.  (#320755, Luca Ferretti)
471
472 2005-11-04  Matthias Clasen  <mclasen@redhat.com>
473
474         * glib/Makefile.am: Apply a patch from Behdad Esfahbod to 
475         use a faster lookup table for g_unichar_get_mirror_char().
476         * glib/gmirroringtable.h: The new table.
477         * glib/gunichartables.h: Remove bidi_mirroring_table.
478         * glib/gen-unicode-tables.pl: Don't generate the mirroring
479         table.
480         * glib/glib-mirroring-tab/*: Sources for the program
481         which generated gmirroringtable.h.
482
483         * glib/glist.c: Avoid some code duplication.
484
485         * glib/gscanner.h: Include gdataset.h.  (#320322)
486
487         * glib/gdebug.h: add new GDebugFlag for fatal_criticals
488         * glib/gmessages.c: (_g_debug_init): handle G_DEBUG=fatal_criticals,
489         to help find critical warnings in applications.  (#320017,
490         Vincent Untz)
491
492 2005-11-02  Tor Lillqvist  <tml@novell.com>
493
494         * glib/glib.symbols: Remove large amount of trailing whitespace
495         from one line. Remove #ifdef G_UNDEFINED from around
496         g_hash_table_new and g_hash_table_new_full symbols, what was the
497         purpose of that? Add the g_slice functions.
498
499 Tue Nov  1 16:24:20 2005  Tim Janik  <timj@imendio.com>
500
501         * glib/gmem.[hc]: prepared deprecation of GMemChunk and GAllocator.
502         added g_slice_*() API to allocate and cache small bits of memory.
503         an actuall allocator implementation for g_slice_*() is still pending.
504
505         * glib/gthread.[hc]: changes from a patch by Matthias Clasen.
506         changed GRealThread list to use in-structure *next; fields instead
507         of GSList, in order for thread iteration to not depenend on g_slice_*()
508         indirectly.
509         _g_thread_mem_private_get():
510         _g_thread_mem_private_set(): added accessors for private memory,
511         needed because the ordinary GPrivate implementation relies on GArray
512         and GSList and therefore indirectly on working g_slice_*() allocations.
513
514         * glib/gthread.[hc]:
515         g_thread_foreach(): new public API function to loop over all existing threads.
516
517         * glib/gdataset.c:
518         * glib/gstring.c:
519         * glib/gcache.c:
520         * glib/garray.c: 
521         * glib/gqueue.c:
522         * glib/gslist.c:
523         * glib/glist.c:
524         * glib/ghash.c:
525         * glib/gtree.c:
526         * glib/ghook.c:
527         * glib/gmain.c:
528         * glib/gnode.c:
529         removed GAllocator and free list usages and accompanying locks.
530         use g_slice_*() API to allocate and cache small bits of memory.
531
532         * glib/ghook.h: removed GMemChunk field from public API.
533
534         * glib/gslist.h:
535         * glib/glist.h: deprecate allocator API, provide _free1() for consistency.
536
537         * glib/gnode.h: deprecate allocator API.
538
539         * glib/gmain.c: reordered GPollRec fields so g_slice_free_chain() can
540         be used for poll rec lists.
541
542         * glib/grel.c: removed mem chunk usage, and allocated tuples via g_slice_*().
543         g_relation_destroy(): free all tuples from the all_tuples hash table,
544         this effectively maintains the life time track keeping of tuples.
545         g_relation_delete_tuple(): free tuples which are removed from the
546         all_tuples hash table. this fixes a temporary leak that was present
547         in the memchunk code until the destruction of the relation.
548
549 2005-10-29  Matthias Clasen  <mclasen@redhat.com>
550
551         * tests/convert-test.c: Add some tests for conversions between
552         UTF-8, UCS-4 and UTF-16.
553
554         * glib/gutf8.c (g_utf8_to_ucs4, g_utf8_to_utf16): Fix handling
555         of len == -1, noticed by Morten Welinder.
556
557 2005-10-27  Erdal Ronahi  <erdal.ronahi@gmail.com>
558
559         * configure.in: Added ku (Kurdish) to ALL_LINGUAS
560
561 2005-10-26  Matthias Clasen  <mclasen@redhat.com>
562
563         * glib/gutf8.c (g_ucs4_to_utf8): Don't set items_read twice
564         in the error case, and add some documentation.  (#319806, Morten
565         Welinder)
566
567 2005-10-19  Manish Singh  <yosh@gimp.org>
568
569         * configure.in: Use AC_CHECK_FUNCS for _NSGetEnviron, to get the
570         config.h symbol automatically. Fixes bug #313731.
571
572 2005-10-19  Tor Lillqvist  <tml@novell.com>
573
574         * glib/gwin32.c (g_win32_get_package_installation_directory):
575         Return a g_strdup()ed copy of the value stored in the hash table,
576         so that it can be g_free()d without leaving a dangling pointer in
577         the hash table. (#319232)
578
579 2005-10-06  Matthias Clasen  <mclasen@redhat.com>
580
581         * glib/gunicollate.c (g_utf8_collate_key_for_filename): Handle
582         all-zero sequences correctly.  (#317930, Sebastien Bacher)
583
584 2005-10-05  Matthias Clasen  <mclasen@redhat.com>
585
586         * glib/gmarkup.c (g_markup_escape_text): Doc addition
587
588         * Makefile.am: Add Collation tests.
589
590         * tests/collate/*: Inputs and expected outputs for collation tests.
591
592         * tests/run-collate-tests.sh: Script to run collation tests.
593
594         * tests/unicode-collate.c (main): Rework slightly to make
595         it usable in unit tests. Also test g_utf8_collate_key_for_filename().
596
597 2005-10-01  Behdad Esfahbod  <behdad@gnome.org>
598
599         * docs/reference/glib/tmpl/unicode.sgml:
600         * glib/gen-unicode-tables.pl:
601         * glib/gunibreak.h:
602         * glib/gunichartables.h:
603         * glib/gunicode.h:
604         * tests/casefold.txt:
605         * tests/casemap.txt: Updated to Unicode 4.1.  There are five new
606         GUnicodeBreakType types.  That may break some applications, like
607         Pango <= 1.10.
608
609 2005-09-26  Matthias Clasen  <mclasen@redhat.com>
610
611         * glib/gstrfuncs.c (g_ascii_strtoull): Add details to the 
612         docs.  (#314393, Matthew F. Barnes)
613
614         * glib/glib.symbols:
615         * glib/gprintf.h: Remove g_snprintf() and g_vsnprintf(), since
616         they are already declared in glib.h. This doesn't break documented
617         use of gprintf.h, but should probably be pointed out in the 
618         release notes for 2.10. (#314232, Behdad Esfahbod)
619
620 Tue Sep 20 13:16:04 2005  Tim Janik  <timj@imendio.com>
621
622         * glib/gpattern.c (g_pattern_ph_match): applied significant recursion
623         complexity optimization, based on a patch from Matthias Clasen.
624
625         * tests/patterntest.c: more tests, mostly from matthias.
626
627 2005-09-20  Matthias Clasen  <mclasen@redhat.com>
628
629         * glib/gqueue.c (g_queue_insert_sorted): Correct the docs.
630         (#316703, Mark Drago)
631
632 Mon Sep 19 17:23:23 2005  Tim Janik  <timj@imendio.com>
633
634         * glib/gpattern.c: applied a patch from matthias which checks on the
635         upper bound of GPatternSpec length to optimize matches.
636         cosmetic fixups.
637
638         * tests/patterntest.c: added more match cases.
639
640 2005-09-16  Tor Lillqvist  <tml@novell.com>
641
642         * glib/gstrfuncs.c (g_ascii_strcasecmp, g_ascii_strncasecmp): Add
643         warning to doc comment that these functions should not be used on
644         encodings like CP932.
645
646 2005-09-14  Matthias Clasen  <mclasen@redhat.com>
647
648         * tests/keyfile-test.c: Add a test for grup names of length 1.
649
650         * glib/gkeyfile.c (g_key_file_line_is_group): Accept group names
651         of length 1.  (#316309)
652         
653 2005-09-12  Matthias Clasen  <mclasen@redhat.com>
654
655         * glib/gmarkup.c (g_markup_escape_text): Clarify docs.
656
657 2005-09-11  Sebastian Wilhelmi  <seppi@seppi.de>
658
659         * tests/refcount/Makefile.am (INCLUDES): Link the the refcount
660         tests to the system thread library $(G_THREAD_LIBS). Fixes #313744
661         and #314217.
662
663 2005-09-11  Kjartan Maraas  <kmaraas@gnome.org>
664
665         * glib/gmain.c: (g_child_watch_prepare), (g_child_watch_check),
666         (child_watch_helper_thread): Remove some dead code. Closes
667         bug #315278.
668
669 2005-09-07  Tor Lillqvist  <tml@novell.com>
670
671         * glib/Makefile.am: Create also a console version of the
672         gspawn-win32-helper program, gspawn-win32-helper-console.exe.
673         It's otherwise identical to gspawn-win32-helper.exe, except marked
674         as a console application (linked without the -mwindows option).
675         
676         * glib/gspawn-win32.c (do_spawn_directly, do_spawn_with_pipes):
677         Drop the dont_wait parameter. Its truth value correlated 100% with
678         the NULLness of the exit_status parameter anyway, so it's enough
679         to check whether exit_status is NULL. Invert the sense of the
680         dont_return_handle parameter and rename it to do_return_handle, to
681         make the code easier to read by avoiding double negations.
682
683         (g_spawn_sync_utf8, g_spawn_async_with_pipes_utf8): Modify calls
684         to do_spawn_with_pipes() accordingly.
685
686         (do_spawn_with_pipes): If we have a console, use the console
687         version of the helper program, otherwise use the GUI one. This
688         avoids extra console windows opening up in some situations. (In
689         case a console application uses the GUI gspawn-win32-helper.exe to
690         spawn another console application we would get a separate console
691         for the spawned console application).
692
693         * glib-zip.in: Distribute also gspawn-win32-helper-console.exe.
694
695 2005-09-05  Matthias Clasen  <mclasen@redhat.com>
696
697         * glib/gmappedfile.c (g_mapped_file_new): Report an error
698         if the file is too large.  (#315275, Kjartan Maraas)
699
700         * glib/gkeyfile.c (g_key_file_load_from_fd): The return value
701         of read() is signed.  (#315273, Kjartan Maraas)
702         
703 2005-08-31  Tor Lillqvist  <tml@novell.com>
704
705         * glib/gutils.h: Wrapping atexit() is a bad idea on Windows, where
706         the EXE and each DLL have their own atexit function chains.
707
708         #define g_atexit as atexit instead. This means it has a
709         better chance of doing what the caller wants. For instance,
710         gtkhtml calls g_atexit() registering a function in gtkhtml
711         itself. This caused a crash when g_atexit() was implemented as a
712         function in the GLib DLL. The gtkhtml DLL was already unloaded by
713         the time the GLib DLL got unloaded.
714
715         * glib/gutils.c: #undef the #define mentioned above, to also get a
716         real g_atexit() into the DLL for backward compatibility. Document
717         the Windows behaviour of g_atexit(), and document the varying ways
718         atexit() can behave in the context of dynamically loaded modules
719         on Unix.
720
721 2005-08-31  Matthias Clasen  <mclasen@redhat.com>
722
723         * glib/glib.symbols: 
724         * glib/gquark.h: 
725         * glib/gdataset.c: Add string interning functions.
726
727 2005-08-28  Matthias Clasen  <mclasen@redhat.com>
728
729         * glib/giochannel.c: Unify some near-duplicate strings. (#314654,
730         Clytie Siddall)
731         
732 2005-08-26  Matthias Clasen  <mclasen@redhat.com>
733
734         * configure.in: Bump version to 2.9.0
735
736 2005-08-25  Tor Lillqvist  <tml@novell.com>
737
738         Make also the g_spawn*() functions take parameters in the GLib
739         file name encoding, i.e. UTF-8, on Windows. Has no impact on Unix
740         API or ABI. Like the other GLib API that was earlier changed to
741         use UTF-8 on Windows, the names of the functions that take UTF-8
742         have _utf8 suffixes added by using preprocessor macros in the
743         header file. The old names are kept for functions with the old
744         behaviour, taking parameters in the system codepage, for DLL ABI
745         stability.
746         
747         * glib/gspawn.h: On Win32 add the suffix _utf8 to the names of the
748         g_spawn*() functions.
749         
750         * glib/gspawn-win32.c: Use wide-char API on NT-based
751         Windows. Convert parameters from UTF-8 to wide chars (NT) or
752         system codepage (Win9x) and call the C library _wspawn*() or
753         spawn*() functions respectvely. Add DLL ABI stability versions
754         that take parameters in the system codepage.
755
756         * glib/gspawn-win32-helper.c: On NT-based Windows use the
757         wide-char versions of argv and envp, and use wide-char API to
758         change directory and spawn the program to run. Remove the verbose
759         debugging output, it was too complex to modify for the wide-char
760         features. (Just add temporary debugging printouts if needed, no
761         need to have them permanently in the source.)
762
763         * glib/gspawn.c: Corresponding documentation updates.
764
765         * glib/glib.symbols: Corresponding changes: Mark the ABI stability
766         symbols as PRIVATE, add the new _utf8-suffixed ones.
767
768 2005-08-24  Stepan Kasal  <kasal@ucw.cz>
769
770         * glib/gtypes.h (G_MININT64): Cast the constant to gint64; it is
771         guint64 otherwise and that can produce warnings about comparison
772         between signed and unsigned.
773
774 2005-08-23  Matthias Clasen  <mclasen@redhat.com>
775
776         * glib/gutils.c: Fix the crt_externs.h include.
777
778 2005-08-23  Stepan Kasal  <kasal@ucw.cz>
779
780         * NEWS: Fix spelling of my first name.
781
782 2005-08-23  Matthias Clasen  <mclasen@redhat.com>
783
784         * Bump version
785
786         * === Released 2.8.1 ===
787
788         * NEWS: Updates
789
790 2005-08-20  Hans Breuer  <hans@breuer.org>
791
792         * glib/makefile.msc.in : link with ws2_32.lib
793
794 2005-08-18  Tor Lillqvist  <tml@novell.com>
795
796         * configure.in: Check for <sys/wait.h>
797
798         * glib/gbacktrace.c: Include <sys/wait.h> on if HAVE_SYS_WAIT_H.
799
800 2005-08-18  Ross Burton  <ross@burtonini.com>
801
802         * glib/gstring.c:
803         Optimise single-character insertions.
804         
805         * glib/gutf8.c:
806         Note copied code.
807         
808         * tests/string-test.c:
809         Add tests for new optimisation, and fix a leak.
810
811 2005-08-17  Matthias Clasen  <mclasen@redhat.com>
812
813         * configure.in: Check for crt_externs.h and _NSGetEnviron.
814
815         * glib/gutils.c: On Darwin, include crt-externs.h and
816         define environ using _NSGetEnviron().  (#313731)
817
818 2005-08-16  Stepan Kasal  <kasal@ucw.cz>
819
820         * glib/gutils.c (g_get_any_init): Move the body of the big if...
821         (g_get_any_init_do): ... to this new function.
822         (g_get_any_init): Declare as inline.
823         (g_get_any_init_locked): New inline function, does the locking.
824         Make use of these two throughout the code.
825
826 2005-08-15  Matthias Clasen  <mclasen@redhat.com>
827
828         * glib/gbacktrace.c (g_on_error_stack_trace): Wait for
829         the child process and then simply return. This makes 
830         The "S" option work as documented in g_on_error_query().
831         (#313125, Matthew F. Barnes)
832
833         * glib/gunicode.h: Update the link to Unicode category
834         values.  (#313369, Behnam Esfahbod)
835
836         * glib/gqueue.c (g_queue_find_custom): Clarify docs
837         a little.  (#311727, Tristan van Berkom)
838
839         * glib/abicheck.sh, gobject/abicheck.sh: Make the 
840         check work on ia64 too, where some symbols ended up 
841         in yet another section.
842