2 Fix missing reset of network reference when disconnecting.
3 Fix wrong variable reference when sending technology replies.
4 Fix wrong identifiers of D-Bus error names.
7 Fix missing auto-connect trigger on Ethernet device removal.
8 Fix availability listing for devices without attached drivers.
9 Fix signals for connected and default technologies.
10 Fix notification to use service types instead of device types.
11 Fix potential pending scan result reply messages after removal.
12 Add support for blocking enable and disable technology changes.
15 Fix setup of udev context before loading any plugins.
16 Fix rearming the scan trigger if a device got disabled.
17 Fix device power state changes tracking with RFKILL notifications.
18 Fix wrong usage of device types instead of service types.
19 Fix connect method to handle non-WiFi services.
22 Add support for RFKILL changes of the WiFi subsystem.
23 Fix state value of Network Manager compatibility support.
26 Fix broken device unregistration on removal.
27 Fix WiMAX device detection handling.
30 Fix missing enforcement of offline mode for new devices.
31 Add support for persistent storage of offline mode.
32 Add support for persistent storage of device power state.
33 Remove deprecated and unused network storage callbacks.
36 Fix issue where hidden network could show up in service list.
37 Fix issue with asynchronous notification of scan requests.
38 Fix message reference leak when adding interface fails.
39 Fix problem when removing network during inactive state.
40 Remove broken and unused callback for joining networks.
41 Remove deprecated device and network interface methods.
42 Remove test scripts for deprecated interface methods.
45 Fix missing signal emission for offline mode changes.
46 Fix signal emission for changes in technology properties.
47 Rename Technologies property to AvailableTechnologies.
50 Fix another reference counting imbalance when adding networks.
51 Revert supplicant change to always reset scanning after results.
54 Fix missing disarming of the connection timeout.
55 Fix handling of multiple supplicant disconnect attempts.
56 Fix simultaneous connects from different technologies limitation.
59 Fix broken handling of auto-connect logic.
60 Fix handling of out-of-range access points.
61 Fix support for connecting to hidden networks.
62 Fix reference counting for networks with same SSID.
63 Fix issue with WiFi interfaces not getting switched off.
64 Fix problems with delayed service list updates.
65 Fix disconnect/abort of connection attempts.
68 Fix showing of WiFi networks with less than 25% signal strength.
69 Fix potential segmentation fault with network passphrases.
72 Fix handling of initial device powered state.
73 Fix missing Powered property changed signals.
74 Fix canceling of a network connection attempt.
75 Fix stalled configuration issue with supplicant.
76 Fix detection of association errors from supplicant.
77 Fix issue with wrong scanning state information.
78 Fix hidden SSID detection routines.
79 Fix visible Ethernet services even without carrier.
80 Add global method call to request scanning.
81 Add support for global technologies list.
82 Add support for delaying service list updates.
83 Update the overall D-Bus API documentation.
86 Fix dhclient probe/remove race condition.
87 Fix handling of disconnected services during auto-connect.
88 Add support for proper group name of hidden networks.
89 Add support for storing SSID details of hidden networks.
92 Fix wrong auto-connect procedure after user connection.
93 Fix invalid update of already connected network.
94 Fix idle state handling after disconnecting device.
95 Fix disconnect race condition in WiFi supplicant.
96 Fix WiFi signal strength reporting.
99 Add udev based network device detection.
100 Add support for global auto-connect feature.
101 Add support for basic service drag and drop.
102 Fix missing passphrase cleanup on service removal.
103 Fix potential duplicate network creation.
104 Fix handling of WEP shared keys.
107 Add plugin for Intel WiMAX SDK support.
108 Add special handling for default vendor SSIDs.
109 Add support for default gateway in different network.
110 Add support for automatic switching of default gateway.
111 Add support for asynchronous handling of Powered property.
112 Add support for connecting/disconnecting Ethernet services.
113 Add support for more detailed error states of services.
114 Add support for clearing error state via ClearProperty.
115 Fix error code for invalid or unknown properties.
116 Fix various timeout handling issues.
117 Remove Policy and Priority device and network properties.
120 Add hidden networks to the service list.
121 Add support for storing the service name.
122 Fix service list sorting for connected services.
123 Fix missing cancel command when operation times out.
124 Fix various issues with service favorite handling.
125 Remove Available and Remember network properties.
128 Add support for asynchronous service connect method.
129 Fix broken storage of service favorite details.
132 Add AT chat library implementation.
133 Fix service lookup for WiFi and WiMAX devices.
134 Fix service state signal emission and error handling.
135 Fix storing and loading of configured passphrases for services.
138 Update Intel OSPM support to latest specification.
139 Add initial support for new service interface.
140 Add support for builtin plugins.
141 Add extra warning if no nameserver is defined.
142 Add error reporting for state and storage directory creation.
143 Add error message for network and device storing failures
144 Fix stale entry in gateway list after connection changes.
145 Fix handling of DHCP results with no nameserver.
146 Fix infinite loop for service lookup.
147 Fix various format string warnings.
150 Detect VMware network interface and ignore them.
151 Fix setting of scan_ssid for hidden networks.
152 Fix empty network name property.
155 Add support for detecting DHCP failures.
156 Add support for joining hidden WiFi networks.
157 Add support for device and network address property.
158 Add support for default /etc/resolv.conf generation.
159 Fix issue with wrong address setting for loopback.
160 Fix detection of WiFi access point changes.
161 Fix crash with blob properties.
164 Add support for notification infrastructure.
165 Add fully dynamic property storage capabilities.
166 Fix broken loading of last network on bootup.
167 Fix crash when unplugging WiFi devices.
168 Rename OSPM plugin to Intel OSPM plugin.
169 Rename WiMAX plugin to Intel WiMAX SDK plugin.
172 Fix connection state change handling.
173 Fix network list enumeration.
174 Fix broken driver matching for devices.
175 Fix issue with network identifier lookup.
178 Add plugin priority handling.
179 Add network type for WiMAX.
180 Fix network protocol selection for Bluetooth PAN.
181 Fix parameters for Bluetooth PAN disconnect method.
184 Fix races with connection signals.
185 Fix automatic switching of default connection.
188 Rename FlightMode to OfflineMode.
189 Add static IPv4 setting support for Ethernet devices.
190 Add extra options to exclude devices and plugins.
191 Add support for toggling debug output.
192 Add support for ScanInterval property.
193 Fix handling of disconnect commands from applications.
194 Fix detection of networks that are out of range.
195 Fix setting network remember status.
196 Fix argument type checking of properties.
199 Add Device and Network property to connection interface.
200 Add option to disable installation of data files.
201 Add command line option to show version number.
202 Fix signal emission for network changes.
205 Add basic support for flight mode.
206 Add support for multiple storage drivers.
207 Add support for RTNL newlink watch API.
208 Add support for different security privileges.
209 Add support for device and network priorities.
210 Add functions for setting network properties.
211 Fix issue with listing devices without a driver.
212 Fix issue with WiFi scanning indication.
213 Fix detection of WiFi security changes.
214 Update WiFi driver to use new network helpers.
215 Install different D-Bus configuration for PolicyKit.
218 Add CONNMAN_API_SUBJECT_TO_CHANGE definition.
219 Add detailed configuration options.
220 Add various D-Bus helper functions.
221 Add generic device driver infrastructure.
222 Add generic network driver infrastructure.
223 Add property for WiFi network mode.
224 Add property for network interface name.
225 Add property for global connection policy.
226 Add support for verbose compiler warnings.
227 Add support for device detection via udev.
228 Add support for systems with udhcpc.
229 Add support for Bluetooth PAN networks.
230 Fix WiFi issue with DHCP restart after handshake.
231 Fix exported symbols list creation.
232 Remove deprecated and unused plugins.
235 Add support for handling Bluetooth adapters.
236 Add support for activating wpa_supplicant on demand.
237 Add Device property to network objects.
238 Add Scanning property to device objects.
239 Fix Name property of device objects.
240 Fix WiFi SSID to object path conversion.
241 Fix duplicate wireless scan results.
242 Fix built issue with libudev and uClibc.
243 Fix issues with element registration failures.
246 Add DNS proxy resolver plugin.
247 Add support for default connections.
248 Add support for gateway change notifications.
249 Add signal strength property for connections.
250 Add property for connection type.
251 Fix issue with carrier detection.
252 Fix broken resolvconf plugin.
255 Add support for automatically connecting known networks.
256 Add improved framework for handling resolver details.
257 Add generic signal strength property.
258 Fix bridge and WiMAX device detection.
259 Fix network listing for Ethernet devices.
262 Add support for indicating network changes.
263 Add support for signal strength property.
264 Add support for unique device names.
265 Fix broken device enumeration.
266 Fix issue with device removal callback.
267 Fix issue with wpa_supplicant disconnecting.
268 Fix D-Bus access policy configuration.
271 Initial public release.