CMakeLists.txt

   1 # Copyright (c) 2011 Samsung Electronics Co., Ltd All Rights Reserved
   2 #
   3 #    Licensed under the Apache License, Version 2.0 (the "License");
   4 #    you may not use this file except in compliance with the License.
   5 #    You may obtain a copy of the License at
   6 #
   7 #        http://www.apache.org/licenses/LICENSE-2.0
   8 #
   9 #    Unless required by applicable law or agreed to in writing, software
  10 #    distributed under the License is distributed on an "AS IS" BASIS,
  11 #    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  12 #    See the License for the specific language governing permissions and
  13 #    limitations under the License.
  14 #
  15 #
  16 # @file        CMakeLists.txt
  17 # @author      Przemyslaw Dobrowolski (p.dobrowolsk@samsung.com)
  18 # @author      Pawel Sikorski (p.sikorski@samsung.com)
  19 # @version     1.0
  20 # @brief
  21 #
  22
  23 # Check minimum CMake version
  24 CMAKE_MINIMUM_REQUIRED(VERSION 2.6)
  25
  26 # Project name
  27 PROJECT(wrt)
  28
  29 INCLUDE(FindPkgConfig)
  30
  31 STRING(REGEX MATCH "([^.]*)" PROJECT_API_VERSION "${PROJECT_VERSION}")
  32 ADD_DEFINITIONS("-DPROJECT_API_VERSION=\"$(PROJECT_API_VERSION)\"")
  33 MESSAGE(STATUS "Version from changelog: ${PROJECT_VERSION}")
  34 ADD_DEFINITIONS("-DWRT_ENGINE_VERSION=\"${PROJECT_VERSION}\"") # WRT_ENGINE_VERSION is used by UA
  35 #ADD_DEFINITIONS("-DWRT_SMACK_ENABLED")
  36
  37 #############################
  38 # Build type
  39 IF(NOT CMAKE_BUILD_TYPE)
  40     SET(CMAKE_BUILD_TYPE "Release")
  41 ENDIF(NOT CMAKE_BUILD_TYPE)
  42
  43 OPTION(DPL_LOG "DPL logs status" ON)
  44 OPTION(WITH_TESTS "Build tests" OFF)
  45 #enable csp policy support
  46 OPTION(CSP_SUPPORT "Support for csp policy" ON)
  47 IF(CSP_SUPPORT)
  48     ADD_DEFINITIONS("-DCSP_ENABLED")
  49 ENDIF(CSP_SUPPORT)
  50 # logs can be only enabled in debug mode
  51 IF(CMAKE_BUILD_TYPE MATCHES "Profiling" AND DPL_LOG)
  52     MESSAGE(STATUS "Logging disabled for DPL")
  53 ELSE(CMAKE_BUILD_TYPE MATCHES "Profiling" AND DPL_LOG)
  54     ADD_DEFINITIONS("-DDPL_LOGS_ENABLED")
  55     MESSAGE(STATUS "Logging enabled for DPL")
  56 ENDIF(CMAKE_BUILD_TYPE MATCHES "Profiling" AND DPL_LOG)
  57
  58 MESSAGE(STATUS "WITH_TESTS: " ${WITH_TESTS})
  59 MESSAGE(STATUS "CMAKE_BUILD_TYPE: ${CMAKE_BUILD_TYPE}")
  60 OPTION(PROFILING "Profiling status" OFF)
  61 IF(CMAKE_BUILD_TYPE MATCHES "Profiling")
  62     MESSAGE(STATUS "PROFILING: ENABLED")
  63     ADD_DEFINITIONS("-DPROFILING_ENABLED")
  64     SET(PROFILING ON)
  65 ELSE(CMAKE_BUILD_TYPE MATCHES "Profiling")
  66     MESSAGE(STATUS "PROFILING: DISABLED")
  67 ENDIF(CMAKE_BUILD_TYPE MATCHES "Profiling")
  68
  69 # Compiler flags
  70 SET(CMAKE_C_FLAGS_PROFILING    "-O2")
  71 SET(CMAKE_CXX_FLAGS_PROFILING  "-O2 -std=c++0x")
  72 SET(CMAKE_C_FLAGS_DEBUG        "-O0 -g")
  73 SET(CMAKE_CXX_FLAGS_DEBUG      "-O0 -std=c++0x -g")
  74 SET(CMAKE_C_FLAGS_RELEASE      "-O2 -g")
  75 SET(CMAKE_CXX_FLAGS_RELEASE    "-O2 -std=c++0x -g")
  76 SET(CMAKE_CXX_FLAGS_CCOV       "-O0 -std=c++0x -g --coverage")
  77
  78 ADD_DEFINITIONS("-fPIC")                        # If supported for the target machine, emit position-independent code, suitable for dynamic linking and avoiding any limit on the size of the global offset table. This option makes a difference on the m68k, PowerPC and SPARC. (BJ: our ARM too?)
  79 #ADD_DEFINITIONS("-fvisibility=hidden")          # Set the default ELF image symbol visibility to hidden - all symbols will be marked with this unless overridden within the code.
  80 ADD_DEFINITIONS("-fPIE")
  81
  82 # Set compiler warning flags
  83 #ADD_DEFINITIONS("-Werror")                      # Make all warnings into errors.
  84 ADD_DEFINITIONS("-Wall")                        # Generate all warnings
  85 ADD_DEFINITIONS("-Wextra")                      # Generate even more extra warnings
  86 ADD_DEFINITIONS("-Wno-variadic-macros")         # Inhibit variadic macros warnings (needed for ORM)
  87 #ADD_DEFINITIONS("-ansi")                        # Accept only ANSI code
  88 #ADD_DEFINITIONS("-pedantic")                    # Accept only pedantic code
  89 #ADD_DEFINITIONS("-Weffc++")                     # Accept only effective C++ code
  90 #ADD_DEFINITIONS("-Wwrite-strings")              # Do not accept writing to contant string memory
  91 #ADD_DEFINITIONS("-Winit-self")                  # Do not accept initializing variable with itself
  92 #ADD_DEFINITIONS("-Wcast-align")                 # Do not accept misaligning with casting
  93 #ADD_DEFINITIONS("-Wcast-qual")                  # Do not accept removing qualifiers with casting
  94 #ADD_DEFINITIONS("-Wold-style-cast")             # Do not accept old style casting
  95 #ADD_DEFINITIONS("-Wpointer-arith")              # Warn about void pointer arthimetic
  96 #ADD_DEFINITIONS("-Wstrict-aliasing")            # Ensure strict aliasing
  97 #ADD_DEFINITIONS("-Wuninitialized")              # Do not accept uninitialized variables
  98 #ADD_DEFINITIONS("-Wmissing-declarations")       # Warn about global and non-accesible functions
  99 #ADD_DEFINITIONS("-Woverloaded-virtual")         # Warn about incidental overiding non-virtual base methods
 100 #ADD_DEFINITIONS("-Wnon-virtual-dtor")           # Warn about non-virtual destructor
 101 #ADD_DEFINITIONS("-Wctor-dtor-privacy")          # Warn about useless and non-constructible classes
 102 #ADD_DEFINITIONS("-Wlong-long")                  # Do not allow using long long
 103 #ADD_DEFINITIONS("-Wunreachable-code")           # Warn about unreachable code
 104 #ADD_DEFINITIONS("-Wfloat-equal")                # Do not accept comparing floating points with equal operator
 105 #ADD_DEFINITIONS("-Wabi")                        # Warn about possible ABI problems
 106 #ADD_DEFINITIONS("-Wswitch-enum")                # Check switch enumeration
 107 #ADD_DEFINITIONS("-Wformat=2")                   # Check printf formatting
 108 #ADD_DEFINITIONS("-Wundef")                      # Warn if an undefined identifier is evaluated in an @if directive.
 109 #ADD_DEFINITIONS("-Wshadow")                     # Warn whenever a local variable shadows another local variable, parameter or global variable or whenever a built-in function is shadowed
 110 #ADD_DEFINITIONS("-Wconversion")                 # Warn for implicit conversions that may alter a value
 111 #ADD_DEFINITIONS("-Wlogical-op")                 # Warn about suspicious uses of logical operators in expressions
 112 #ADD_DEFINITIONS("-Waggregate-return")           # Warn if any functions that return structures or unions are defined or called.
 113 #ADD_DEFINITIONS("-Wmissing-field-initializers") # Warn if a structure's initializer has some fields missing.
 114 #ADD_DEFINITIONS("-Wredundant-decls")            # Warn if anything is declared more than once in the same scope, even in cases where multiple declaration is valid and changes nothing.
 115 #ADD_DEFINITIONS("-Wmissing-include-dirs")       # Warn if a user-supplied include directory does not exist.
 116 #ADD_DEFINITIONS("-Wswitch-default")             # Warn whenever a switch statement does not have a default case.
 117 #ADD_DEFINITIONS("-Wsync-nand")                  # Warn when __sync_fetch_and_nand and __sync_nand_and_fetch built-in functions are used. These functions changed semantics in GCC 4.4.
 118 #ADD_DEFINITIONS("-Wunused")                     # All the above -Wunused options combined.
 119 #ADD_DEFINITIONS("-Wstrict-overflow=5")          # Also warn about cases where the compiler reduces the magnitude of a constant involved in a comparison.
 120 #ADD_DEFINITIONS("-Wunsafe-loop-optimizations")  # Warn if the loop cannot be optimized because the compiler could not assume anything on the bounds of the loop indices. With -funsafe-loop-optimizations warn if the compiler made such assumptions.
 121 #ADD_DEFINITIONS("-Wmissing-format-attribute")   # Warn about function pointers which might be candidates for format attributes.
 122 #ADD_DEFINITIONS("-Wpadded")                     # Warn if padding is included in a structure, either to align an element of the structure or to align the whole structure.
 123 #ADD_DEFINITIONS("-Winline")                     # Warn if a function can not be inlined and it was declared as inline.
 124 #ADD_DEFINITIONS("-Wdisabled-optimization")      # Warn if a requested optimization pass is disabled.
 125 ADD_DEFINITIONS("-Wno-deprecated")               # No warnings about deprecated features
 126
 127 #############################
 128 # Targets names
 129 SET(TARGET_WRT_ENGINE_STATIC  "wrt-engine-static")
 130 SET(TARGET_TESTS_COMMON_LIB "wrt-engine-tests-lib") #tests only
 131 SET(TARGET_PROFILING_LIB "wrt-profiling")
 132 SET(TARGET_PLUGIN_MODULE_LIB "wrt-plugin-module")
 133 SET(TARGET_VIEW_MODULE_LIB "wrt-view-module")
 134 SET(TARGET_CORE_MODULE_LIB "wrt-core-module")
 135 SET(TARGET_BUNDLES_LIB "wrt-wk2-bundle")
 136
 137 SET(PROF_LIB "")
 138 IF(PROFILING)
 139     SET(PROF_LIB ${TARGET_PROFILING_LIB})
 140 ENDIF(PROFILING)
 141
 142 INSTALL(FILES
 143     ${PROJECT_SOURCE_DIR}/wrt_reset_db.sh
 144     ${PROJECT_SOURCE_DIR}/wrt_reset_all.sh
 145     DESTINATION /usr/bin/
 146     )
 147 INSTALL(FILES ${CMAKE_SOURCE_DIR}/warp_security_error.msg
 148     DESTINATION /usr/etc/wrt/
 149     PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ GROUP_WRITE
 150     )
 151 INSTALL(FILES ${CMAKE_SOURCE_DIR}/parental.png
 152     DESTINATION /usr/etc/wrt/
 153     PERMISSIONS OWNER_READ OWNER_WRITE GROUP_READ GROUP_WRITE
 154     )
 155 INSTALL(FILES   ${CMAKE_SOURCE_DIR}/data/default_icon_tizen.png
 156     DESTINATION share/wrt-engine/
 157     )
 158 INSTALL(FILES   ${CMAKE_SOURCE_DIR}/data/default_icon_wac.png
 159     DESTINATION share/wrt-engine/
 160     )
 161 INSTALL(FILES   ${CMAKE_SOURCE_DIR}/data/userAgentProfile.xml
 162     DESTINATION share/wrt-engine/
 163     )
 164 INSTALL(FILES   ${CMAKE_SOURCE_DIR}/data/WAC2.0TestRootCA.cert
 165     DESTINATION share/wrt-engine/
 166     )
 167 INSTALL(FILES   ${CMAKE_SOURCE_DIR}/data/AutoSave.js
 168     DESTINATION share/wrt-engine/
 169     )
 170 ADD_CUSTOM_COMMAND(
 171     OUTPUT ${PROJECT_SOURCE_DIR}/data/wrt_theme.edj
 172     COMMAND edje_cc -id ${PROJECT_SOURCE_DIR}/data/images
 173     ARGS  ${PROJECT_SOURCE_DIR}/data/wrt_theme.edc
 174           ${PROJECT_SOURCE_DIR}/data/wrt_theme.edj
 175     DEPENDS ${PROJECT_SOURCE_DIR}/data/wrt_theme.edc
 176     )
 177 ADD_CUSTOM_COMMAND(
 178     OUTPUT ${PROJECT_SOURCE_DIR}/data/Daemon.edj
 179     COMMAND edje_cc
 180     ARGS  ${PROJECT_SOURCE_DIR}/data/Daemon.edc
 181           ${PROJECT_SOURCE_DIR}/data/Daemon.edj
 182     DEPENDS ${PROJECT_SOURCE_DIR}/data/Daemon.edc
 183     )
 184 ADD_CUSTOM_COMMAND(
 185     OUTPUT ${PROJECT_SOURCE_DIR}/data/Platform.edj
 186     COMMAND edje_cc
 187     ARGS  ${PROJECT_SOURCE_DIR}/data/Platform.edc
 188           ${PROJECT_SOURCE_DIR}/data/Platform.edj
 189     DEPENDS ${PROJECT_SOURCE_DIR}/data/Platform.edc
 190     )
 191 ADD_CUSTOM_TARGET( WRT_THEME_EDJES ALL DEPENDS
 192     ${PROJECT_SOURCE_DIR}/data/wrt_theme.edj
 193     )
 194 ADD_CUSTOM_TARGET( WRT_EDJES ALL DEPENDS
 195     ${PROJECT_SOURCE_DIR}/data/Daemon.edj
 196     )
 197 ADD_CUSTOM_TARGET( WRT_PLATFORM_LAYOUT_EDJES ALL DEPENDS
 198     ${PROJECT_SOURCE_DIR}/data/Platform.edj
 199     )
 200 ADD_CUSTOM_COMMAND(
 201     OUTPUT ${PROJECT_SOURCE_DIR}/data/generic_popup.edj
 202     COMMAND edje_cc
 203     ARGS  ${PROJECT_SOURCE_DIR}/data/generic_popup.edc
 204           ${PROJECT_SOURCE_DIR}/data/generic_popup.edj
 205     DEPENDS ${PROJECT_SOURCE_DIR}/data/generic_popup.edc
 206     )
 207 ADD_CUSTOM_TARGET(generic_popup ALL DEPENDS
 208     ${PROJECT_SOURCE_DIR}/data/generic_popup.edj
 209     )
 210 INSTALL(FILES   ${PROJECT_SOURCE_DIR}/data/generic_popup.edj
 211     DESTINATION share/edje/ace/
 212     )
 213 INSTALL(FILES   ${PROJECT_SOURCE_DIR}/data/wrt_theme.edj
 214     DESTINATION share/edje/wrt/
 215     )
 216 INSTALL(FILES   ${PROJECT_SOURCE_DIR}/data/Daemon.edj
 217     DESTINATION share/edje/wrt/
 218     )
 219 INSTALL(FILES   ${PROJECT_SOURCE_DIR}/data/Platform.edj
 220     DESTINATION share/edje/wrt/
 221     )
 222 ADD_CUSTOM_COMMAND(
 223     OUTPUT ${PROJECT_SOURCE_DIR}/data/generic_popup_horizontal.edj
 224     COMMAND edje_cc
 225     ARGS  ${PROJECT_SOURCE_DIR}/data/generic_popup_horizontal.edc
 226           ${PROJECT_SOURCE_DIR}/data/generic_popup_horizontal.edj
 227     DEPENDS ${PROJECT_SOURCE_DIR}/data/generic_popup_horizontal.edc
 228     )
 229 ADD_CUSTOM_TARGET(generic_popup_horizontal ALL DEPENDS
 230     ${PROJECT_SOURCE_DIR}/data/generic_popup_horizontal.edj
 231     )
 232 INSTALL(FILES   ${PROJECT_SOURCE_DIR}/data/generic_popup_horizontal.edj
 233     DESTINATION share/edje/ace/
 234     )
 235
 236 ADD_SUBDIRECTORY(src)
 237 ADD_SUBDIRECTORY(po)
 238
 239 SET(WRT_API_NEW_INCLUDES
 240     "${PROJECT_SOURCE_DIR}/src/api_new/"
 241     "${PROJECT_SOURCE_DIR}/src/domain/"
 242     "${PROJECT_SOURCE_DIR}/src/view/")
 243
 244 SET(PKGCONFIG_DIR ${PROJECT_SOURCE_DIR}/pkgconfig)
 245
 246 CONFIGURE_FILE(${PKGCONFIG_DIR}/wrt-core.pc.in
 247     ${PKGCONFIG_DIR}/wrt-core.pc @ONLY)
 248 INSTALL(FILES ${PKGCONFIG_DIR}/wrt-core.pc DESTINATION lib/pkgconfig)
 249
 250 IF(WITH_TESTS)
 251     add_subdirectory(tests)
 252 ENDIF(WITH_TESTS)
 253
 254